Scribd
Upload
124 views1 page

Hardmvs - It'S All About The Hardware

This document provides a wiring diagram for connecting a Neo Geo MVS arcade board to a JAMMA harness. It lists the pin assignments for the JAMMA connector on both the solder and parts sides. Notes explain some of the less common connections like lock out coils, tilt switches, and audio ground/positive connections. The diagram is intended to help integrate a Neo Geo MVS board into an arcade cabinet wired for the standard JAMMA interface.

Uploaded by

Michael Souza de Barbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views1 page

Hardmvs - It'S All About The Hardware

This document provides a wiring diagram for connecting a Neo Geo MVS arcade board to a JAMMA harness. It lists the pin assignments for the JAMMA connector on both the solder and parts sides. Notes explain some of the less common connections like lock out coils, tilt switches, and audio ground/positive connections. The diagram is intended to help integrate a Neo Geo MVS board into an arcade cabinet wired for the standard JAMMA interface.

Uploaded by

Michael Souza de Barbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

hardMVS - It's all about the hardware

www.hardMVS.com
Jamma Wiring Neo Geo MVS
Solder Side Parts Side Solder Side Parts Side
Ground A 1 Ground Ground A 1 Ground
Ground B 2 Ground Ground B 2 Ground
Pos 5 Volts C 3 Pos 5 Volts Pos 5 Volts C 3 Pos 5 Volts
Pos 5 Volts D 4 Pos 5 Volts Pos 5 Volts D 4 Pos 5 Volts
Neg 5 Volts E 5 Neg 5 Volts 10 E 5 10
Pos 12 Volts F 6 Pos 12 Volts Pos 12 Volts F 6 Pos 12 Volts
Key H 7 Key Key H 7 Key
1 Coin Counter #2 J 8 Coin Counter #1 1 1 Coin Counter #2 J 8 Coin Counter #1 1
2 Lock Out Coil #2 K 9 Lock Out Coil #1 2 2 Lock Out Coil #2 K 9 Lock Out Coil #1 2
9 Speaker Neg L 10 Speaker Pos Speaker Pos L L 10 Speaker Pos R
7 Audio Ground M 11 Audio Pos 7 4 Test Switch M 11 Audio Pos (mono) 11
Video Green N 12 Video Red Video Green N 12 Video Red
Video Sync P 13 Video Blue Video Sync P 13 Video Blue
3 Service Switch R 14 Video Ground 3 Service Switch R 14 Video Ground
5 Tilt Switch S 15 Test Switch 4 6 Coin Switch #4 P2 S 15 Coin Switch #3 P1 6
6 Coin Switch #2 T 16 Coin Switch #1 6 6 Coin Switch #2 P2 T 16 Coin Switch #1 P1 6
2P Start U 17 1P Start 2P Start U 17 1P Start
2P Up V 18 1P Up 2P Up V 18 1P Up
2P Down W 19 1P Down 2P Down W 19 1P Down
2P Left X 20 1P Left 2P Left X 20 1P Left
2P Right Y 21 1P Right 2P Right Y 21 1P Right
Player 2 Button A Z 22 Player 1 Button A Player 2 Button A Z 22 Player 1 Button A
Player 2 Button B a 23 Player 1 Button B Player 2 Button B a 23 Player 1 Button B
Player 2 Button C b 24 Player 1 Button C Player 2 Button C b 24 Player 1 Button C
8 Player 2 Button D c 25 Player 1 Button D 8 Player 2 Button D c 25 Player 1 Button D
d 26 Select Down d 26 Select Up
Ground e 27 Ground Ground e 27 Ground
Ground f 28 Ground Ground f 28 Ground
Notes:
1 Coin Counter is used to advance a mechanical coin counter
2 Lock Out Coil is used to block the coin path when the machine is off and send the coin to the coin return (rarely used)
3 Service Switch coins up the machine, but does not advance the mechanical coin counter
4 Test Switch enables test mode in the PCB if supported
5 Tilt or "Slam" Switch resets machine if weighted switch is triggered (rarely used)
6 Coin Switch detects coins inserted and credits the game
7 Audio Ground & Audio Positive are for pre-amp outputs (rarely used)
8 Button D is optional as most Jamma games use only 3 buttons
9 Speaker Negative = Ground / Common
10 There are NO traces to connect the leads on the MVS boards where -5V would come in from a Jamma Harness
Using a harness with a live -5V connection should be fine (check first)
11 Audio Positive (mono) will accomidate mono fram a Jamma board to one speaker (if wired)

You might also like