DSR (Delhi Schedule Rate) 2013

I.No.
Description of Item Rate (Rs) Unit Amount(Rs)

1 Earth work in surface excavation not exceeding
30 cm in depth but exceeding 1.5 m in width as
well as 10 sqm on plan including disposal of
excavated earth upto 50 m and lift up to 1.5 m,
disposed soil to be levelled and neatly dressed :
a) All kinds of soil 100.00 Sqm 4553.55 100 Square
Metre
4554.00
2 Earth work in rough excavation, banking
excavated earth in layers not exceeding 20 cm
in depth, breaking clods, watering, rolling each
layer with tonne roller or wooden or steel
rammers, and rolling every 3rd and top-most
layer with power roller of minimum 8 tonnes
and dressing up in embankments for roads,
flood banks, marginal banks and guide banks or
filling up ground depressions, lead up to 50 m
and lift up to 1.5 m :
a) All kinds of soil 1.00 Cum 346.00 One Cubic
Metre
346.00
3 Banking excavated earth in layers not exceeding
20 cm. in depth, breaking clods, watering,
rolling each layer with tonne roller, or
wooden or steel rammers, and rolling every 3rd
and top-most layer with power roller of
minimum 8 tonnes and dressing up, in
embankments for roads, flood banks, marginal
banks, and guide banks etc., lead up to 50 m
and lift up to 1.5 m.
Metre
218.00
4 Deduct for not rolling with power roller of
minimum 8 tonnes for banking excavated earth
in layers not exceeding 20 cm in depth.
1.00 Cum -2.85 One Cubic
Metre
-3.00
5 Deduct for not watering the excavated earth for
banking
Metre
-15.00
6 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over
areas (exceeding 30cm in depth. 1.5m in width
as well as 10 sqm on plan) including disposal of
excavated earth, lead up to 50m and lift up to
1.5m,disposed earth to be levelled and neatly
dressed.
Metre
147.00
CPWD DSR-2013 IN MS EXCEL (READY TO USE, WITH FORMAULAS)
Quantity
Sub-Head : Earth Work
DSR-13 Page 1 of 550
I.No. Description of Item Rate (Rs) Unit Amount(Rs) Quantity
(Hydraulic excavator) / manual means over
areas (exceeding 30 cm in depth, 1.5m in width
as well as 10 sqm on plan) including disposal of
excavated earth, lead up to 50 m and lift up to
1.5m, disposed earth to be levelled and neatly
dressed.
a) Ordinary rock 1.00 Cum 227.80 One Cubic
Metre
228.00
b) Hard rock (requiring blasting) 1.00 Cum 393.60 One Cubic
Metre
394.00
c) Hard rock (blasting prohibited) 1.00 Cum 571.90 One Cubic
Metre
572.00
(Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding
1.5 m in width or 10 sqm on plan) including
dressing of sides and ramming of bottoms, lift
up to 1.5 m, including getting out the excavated
soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
a) All kinds of soil. 1.00 Cum 148.25 One Cubic
Metre
148.00
9 Excavation work by mechanical means
(Hydraulic excavator)/ manual means in
foundation trenches or drains not exceeding
1.5m in width or 10 sqm on plan including
dressing of sides and ramming of bottoms, lift
up to 1.5 m, including getting out the excavated
soil and disposal of surplus excavated soils as
directed, within a lead of 50m.
a) Ordinary rock 1.00 Cum 244.90 One Cubic
Metre
245.00
b) Hard rock (requiring blasting) 1.00 Cum 427.75 One Cubic
Metre
428.00
c) Hard rock (blasting prohibited) 1.00 Cum 574.15 One Cubic
Metre
574.00
10 Excavating trenches of required width for pipes,
cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth
up to 1.5 m including getting out the excavated
soil, and then returning the soil as required,
inlayers not exceeding 20 cmin depth, including
consolidating each deposited layer by ramming,
watering, etc. and disposing of surplus
excavated soil as directed, within a lead of 50 m
:
a) All kinds of soil
(i) Pipes, cables etc, not exceeding 80 mm dia. 1.00 m 118.00 One Running
Metre
118.00
(ii) Pipes, cables etc. exceeding 80 mm dia. but not
exceeding 300 mm dia
1.00 m 192.75 One Metre 193.00
(iii) Pipes, cables etc. exceeding 300 mm dia but not
exceeding 600 mm.
1.00 m 300.90 One Running
Metre
301.00
11 Extra for excavating trenches for pipes, cables
etc. in all kinds of soil for depth exceeding 1.5
m, but not exceeding 3 m. (Rate is over
corresponding basic item for depth up to 1.5
metre).
Metre
1.00
12 Extra for excavating trenches for pipes, cables,
etc, in all kinds of soil for depth exceeding 3 m
in depth, but not exceeding 4.5 m. (Rate is over
metre.)
Metre
3.00
13 Excavating trenches of required width for pipes,
cables, etc, including excavation for sockets,
depth up to 1.5 m including getting out the
excavated materials, returning the soil as
required in layers not exceeding 20 cm in depth,
including consolidating each deposited layers by
ramming, watering etc., stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within a
lead of 50m :
a) Ordinary rock :
(i) Pipes, cables etc. not exceeding 80 mm dia. 1.00 m 167.50 One Running
Metre
168.00
(ii) Pipes, cables etc. exceeding 80 mm dia but not
exceeding 300 mm dia.
Metre
415.00
(iii) Pipes, cables exceeding 300 mm dia but not
exceeding 600mm dia
Metre
477.00
b) Hard rock (requiring blasting)
Metre
255.00
Metre
631.00
exceeding 600mm dia
Metre
726.00
c) Hard rock (blasting prohibited)
Metre
324.00
Metre
802.00
exceeding 600mm dia.
Metre
923.00
etc. in ordinary/hard rock exceeding 1.5 m in
depth but not exceeding 3 m. (Rate is over
metre.)
Metre
1.00
etc. in ordinary/hard rock exceeding 3m in
depth but not exceeding 4.5 m. (Rate is over
metre.)
Metre
3.00
16 Close timbering in trenches including strutting,
shoring and packing cavities (wherever
required) complete. (Measurements to be taken
of the face area timbered).
a) Depth not exceeding 1.5 m. 1.00 Sqm 107.45 One Square
Metre
107.00
b) Depth exceeding 1.5 m but not exceeding 3 m. 1.00 Sqm 112.75 One Square
Metre
113.00
c) Depth exceeding 3 m but not exceeding 4.5 m. 1.00 Sqm 124.75 One Square
Metre
125.00
17 Close timbering in case of shafts, wells, cesspits,
manholes and the like including strutting,
required) etc. complete.(Measurements to be
taken of the face area timbered).
Metre
111.00
Metre
123.00
Metre
135.00
18 Close timbering over areas including strutting,
required) etc. complete. (Measurements to be
taken of the face area timbered) :
Metre
95.00
Metre
102.00
Metre
108.00
19 Extra for planking, strutting and packing
materials for cavities (in close timbering) if
required to be left permanently in position.
(Face area of timber permanently left to be
measured).
1.00 Sqm 1384.85 One Square
Metre
1385.00
20 Open timbering in trenches including strutting
and shoring complete (measurements to be
taken of the face area timbered):
Metre
56.00
Metre
59.00
Metre
64.00
21 Open timbering in case of shafts, wells, cesspits,
manholes and the like including strutting and
shoring complete (Measurements to be taken
of the face area timbered):
Metre
48.00
Metre
53.00
Metre
60.00
22 Open timbering over areas including strutting,
shoring etc. complete. (Measurements to be
taken of the face area timbered):
Metre
33.00
Metre
37.00
Metre
43.00
23 Extra for planking and strutting in open
timbering if required to be left permanently in
position. (Face area of the timber permanently
left to be measured).
Metre
714.00
24 Extra rates for quantities of works, executed:
a) In or under water and/or liquid mud, including
pumping out water as required.
Metre
0.00
b) In or under foul position, including pumping out
water as required.
Metre
0.00
25 Filling available excavated earth (excluding
rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming
and watering, lead up to 50 m and lift up to 1.5
m.
1.00 Cum 101.50 One Cubic
Metre
102.00
26 Extra for every additional lift of 1.5 m or part
thereof in excavation /banking excavated or
stacked materials.
a) All kinds of soil. 1.00 Cum 41.75 One Cubic
Metre
42.00
b) Ordinary or hard rock. 1.00 Cum 74.90 One Cubic
Metre
75.00
27 Supplying and filling in plinth with local sand
under floors, including watering, ramming,
consolidating and dressing complete.
Metre
844.00
28 Supplying and filling in plinth with local sand
under floors, including watering, ramming,
consolidating and dressing complete.
Metre
844.00
29 Surface dressing of the ground including
removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish,
lead up to 50 m and lift upto1.5 m.
a) All kinds of soil. 100.00 Sqm 1124.60 100 Square
Metre
1125.00
30 Ploughing the existing ground to a depth of 15
cm to 25 cm and watering the same.
a) All kinds of soil. 100.00 Sqm 1139.15 100 Square
Metre
1139.00
31 Excavating holes more than 0.10 cum & up to
0.5 cum including getting out the excavated
soil, then returning the soil as required in layers
not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming,
watering etc, disposing of surplus excavated
soil; as directed within a lead of 50 m and lift
upto1.5 m.
a) All kinds of soil. 1.00 No. 47.15 Each 47.00
b) Ordinary rock 1.00 No. 76.15 Each 76.00
c) Hard rock (requiring blasting) 1.00 No. 131.00 Each 131.00
d) Hard rock (blasting prohibited) 1.00 No. 174.90 Each 175.00
32 Clearing jungle including uprooting of rank
vegetation, grass, brush wood, trees and
saplings of girth up to 30 cm measured at a
height of 1 m above ground level and removal
of rubbish up to a distance of 50m outside the
periphery of the area cleared.
100.00 Sqm 579.55 100 Square
Metre
580.00
33 Clearing grass and removal of the rubbish up to
a distance of 50 m outside the periphery of the
area cleared.
100.00 Sqm 296.80 100 Square
Metre
297.00
34 Felling trees of the girth (measured at a height
of 1 m above ground level) including cutting of
trunks and branches, removing the roots and
stacking of serviceable material and disposal of
unserviceable material.
a) Beyond 30 cm girth up to and including 60 cm
girth
1.00 No. 177.85 Each 178.00
b) Beyond 60 cm girth up to and including 120 cm
girth
1.00 No. 786.95 Each 787.00
c) Beyond 120 cm girth up to and including 240
cm girth
1.00 No. 3638.05 Each 3638.00
d) Above 240 cm girth 1.00 No. 7297.40 Each 7297.00
35 Supplying chemical emulsion in sealed
containers including delivery as specified.
a) Chlorpyriphos/ Lindane emulsifiable
concentrate of 20%
1.00 Ltr 185.95 One Litre 186.00
36 Diluting and injecting chemical emulsion for
POST-CONSTRUCTIONAL anti- termite
treatment (excluding the cost of chemical
emulsion) :
a) Along external wall where the apron is not
provided using chemical emulsion @ 7.5 litres /
sqm of the vertical surface of the substructure
to a depth of 300 mm including excavation
channel along the wall &rodding etc. complete:
(i) With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration.
Metre
14.00
b) Along the external wall below concrete or
masonry apron using chemical emulsion @2.25
litres per linear metre including drilling and
plugging holes etc.
(i) With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration.
Metre
21.00
c) Treatment of soil under existing floors using
chemical emulsion @ one litre per hole, 300
mm apart including drilling 12 mm diameter
holes and plugging with cement mortar 1 :2 (1
cement : 2 Coarse sand) to match the existing
floor :
(i) With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration.
Metre
108.00
d) Treatment of existing masonry using chemical
emulsion @ one litre per hole at 300 mm
interval including drilling holes at 45 degree and
plugging them with cement mortar 1:2 (1
cement : 2 coarse sand) to the full depth of the
hole :
(i) With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration.
Metre
16.00
e) Treatment at points of contact of wood work by
chemical emulsion Chlorpyriphos/ Lindane (in
oil or kerosene based solution) @ 0.5litres per
hole by drilling 6 mm dia holes at downward
angle of 45degree at 150 mm centre to centre
and sealing the same.
Metre
188.00
37 Deduct for disposed soil not levelled and neatly
dressed.
Metre
-31.00
38 Supply and stacking of Fly ash conforming to
IRC- 58 at site including carriage, loading ,
unloading & stacking up to any lead (measured
stacks will be reduced by 20% for payment).
Metre
133.00
39 Filling with available fly ash and earth
(excluding rock) in trenches or embankment in
layers (each layer should not exceed 15 cm),
with intermediate layer of compacted earth
(Soil density of 98%) after every four layers of
compacted depth of fly ash, sides & top layer of
filling shall be done with earth having total
minimum compacted thickness 30 cm or as
decided by Engineer -in- charge, including
compacting each layer by rolling/ ramming and
watering , all complete as per drawing and
direction of Engineer -in - charge.
Metre
102.00
34862.00
40 Providing and laying in position cement
concrete of specified grade excluding the cost
of centering and shuttering - All work up to
plinth level :
a) 1:1:2 (1 Cement : 1 coarse sand : 2 graded
stone aggregate 20 mm nominal size)
Metre
6631.00
b) 1:1:3 (1 Cement: 1 coarse sand: 3 graded
stone aggregate 20 mm nominal size).
Metre
5318.00
c) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
Metre
4922.00
d) 1:2:4 (1 Cement : 2 coarse sand : 4 graded
Metre
4763.00
Total of the Sub-Head - Earth Work :
Sub-Head : Concrete Work
e) 1:3:6 (1 Cement : 3 coarse sand : 6 graded
Metre
4409.00
f) 1:3:6 (1 Cement : 3 coarse sand : 6 graded
Metre
4231.00
g) 1:3:6 (1 Cement : 3 fine sand : 6 graded stone
aggregate 40 mm nominal size).
Metre
3974.00
h) 1:4:8 (1 Cement : 4 coarse sand : 8 graded
Metre
3921.00
i) 1:4:8 (1 cement : 4 fine sand : 8 graded stone
Metre
3664.00
j) 1:5:10 (1 cement : 5 coarse sand : 10 graded
Metre
3673.00
k) 1:5:10 (1 cement : 5 fine sand : 10 graded stone
Metre
3407.00
l) 1:2:3:9 (1 ordinary portland cement : 2 Fly ash
: 3 coarse sand : 9 graded stone aggregate 40
mm nominal size).
Metre
3808.00
m) 1:2:4:11 (1 ordinary portland cement : 2 fly
ash : 4 coarse sand : 11 graded stone aggregate
40 mm nominal size)
Metre
3517.00
41 Providing and laying cement concrete in
retaining walls, return walls, walls (any
thickness) including attached pilasters, columns,
piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks, plain
windowsills, fillets, sunken floor, etc., up to
floor five level, excluding the cost of centering,
shuttering and finishing :
a) 1:1:2 (1 cement : 1 coarse sand : 2 graded stone
Metre
7532.00
b) 1:1:3 (1 cement:1 coarse sand:3 graded
Metre
6218.00
c) 1:2:4 (1 Cement : 2 coarse sand : 4 graded
Metre
5822.00
d) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
Metre
5664.00
e) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
Metre
5309.00
f) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
Metre
5131.00
g) 1:3:6 (1 cement : 3 fine sand : 6 graded stone
Metre
4874.00
h) 1:5:10 (1 cement : 5 coarse sand : 10 graded
Metre
4568.00
42 Centering and shuttering including strutting,
propping etc. and removal of form work for :
a) Foundations, footings, bases for columns. 1.00 Sqm 186.40 One Square
Metre
186.00
b) Retaining walls, return walls, walls (any
thickness) including attached pilasters,
buttresses, plinth and string courses fillets,
kerbs and steps etc..
Metre
335.00
c) Columns, piers, abutments, pillars, posts and
struts.
Metre
423.00
43 Providing and laying cement concrete in kerbs,
steps and the like at or near ground level
excluding the cost of centering, shuttering and
finishing.
a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded
Metre
4922.00
b) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
Metre
4409.00
44 Providing and fixing up to floor five level
precast cement concrete string or lacing
courses, copings, bed plates, anchor blocks,
plain window sills, shelves, louvers, steps, stair
cases, etc. including hoisting and setting in
position with cement mortar 1:3 (1 Cement :
3coarse sand), cost of required centering
complete.
a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded
stone aggregate 20mm nominal size).
Metre
6065.00
aggregate 20mm nominal size).
Metre
5669.00
Metre
5156.00
45 Providing and fixing at or near ground level
precast cement concrete in kerbs, edgings etc.
as per approved pattern and setting in position
with cement mortar 1:3 (1 Cement : 3 coarse
sand)including the cost of required centering,
shuttering complete.
a) 1:2:4 ( 1 cement : 2 coarse sand : 4 graded
Metre
5161.00
precast cement concrete solid block including
hoisting and setting in position with cement
mortar 1:3 (1 cement : 3 coarse sand), cost of
required centering, shuttering complete :
Metre
8407.00
Metre
7893.00
precast cement concrete hollow block including
hoisting and setting in position with cement
mortar 1:3 (1 cement : 3 coarse sand), cost of
required centering, shuttering complete.
Metre
6476.00
b) 1:3:6 (1 Cement : 3 coarse sand : 6 graded
Metre
6240.00
48 Precasting and placing in position 125 mm dia
Bollards 600 mm high of required shape
including providing M.S. Pipe Sleeve 50 mm dia
300 mm long in the Bollard and M.S. Pipes 40
mm dia and 450mm long with 150x150x6mm
M.S. plate welded at bottom and embedded
150mm in cement concrete 1:3:6 (1 Cement : 3
coarse sand : 6 graded stone aggregate 20 mm
nominal size) including necessary excavation of
size 250x250x450mm deep for the same in
bitumen/concrete pavement at specified
spacing.
1.00 No. 519.30 Each 519.00
49 Providing and laying damp-proof course 40mm
thick with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5mm
nominal size).
Metre
221.00
50 Providing and laying damp-proof course 50mm
thick with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size).
Metre
284.00
51 Extra for providing and mixing water proofing
material in cement concrete work in doses by
weight of cement as per manufacturers
specifications
1.00 units 44.36 per 50 kg
cement
44.00
52 Applying a coat of residual petroleum bitumen
of grade of VG-10 of approved quality using
1.7kg per square metre on damp proof course
after cleaning the surface with brushes and
finally with apiece of cloth lightly soaked in
kerosene oil.
Metre
109.00
53 Extra for concrete work in superstructure above
floor V level for each four floors or part thereof.
Metre
517.00
54 Extra for laying concrete in or under water
and/or liquid mud including cost of pumping or
bailing out water and removing slush etc.
complete.
1.00 units 385.60 cum per
meter depth
386.00
55 Extra for laying concrete in or under foul
positions.
Metre
156.00
56 Making plinth protection 50mm thick of cement
concrete 1:3:6 (1 cement :3 coarse sand : 6
graded stone aggregate 20 mm nominal size)
over 75mm thick bed of dry brick ballast 40 mm
nominal size, well rammed and consolidated
and grouted with fine sand including finishing
the top smooth
Metre
379.00
57 Extra for addition of synthetic Polyester
triangular fiber of length 12mm, effective
diameter 10-40 microns and specific gravity of
1.34to 1.40 in cement concrete/ RCC/ Flooring/
water retaining structures by using 125gms. of
synthetic Polyester triangular fiber for 50 Kgs.
cement used as per directions of Engineer-in-
Charge.
1.00 units 53.00 Per Bag of
50Kg. of
cement
53.00
58 Providing and laying in position ready mixed
plain cement concrete, using fly ash and cement
content as per approved design mix and
manufactured in fully automatic batching plant
and transported to site of work in transit mixer
for all leads, having continuous agitated mixer,
manufactured as per mix design of specified
grade for plain cement concrete work, including
pumping of R.M.C. from transit mixer to site of
laying and curing, excluding the cost of
centering, shuttering and finishing, including
cost of curing, admixtures in recommended
proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve workability
without impairing strength and durability as per
direction of the Engineer - in - charge.
a) All works up to plinth level.
(i) M-15 grade plain cement concrete (cement
content considered @ 240 kg/cum).
Metre
5390.00
(ii) M-10 grade plain cement concrete (cement
content considered @ 220 kg/cum ).
Metre
5262.00
b) All works above plinth and up to floor V level.
(i) M-15 grade plain cement concrete. (cement
content considered @ 240 kg. /cum).
Metre
5865.00
Metre
5736.00
59 Providing and laying in position ready mixed
plain cement concrete, with cement content as
per approved design mix and manufactured in
fully automatic batching plant and transported
to site of work in transit mixer for all leads,
having continuous agitated mixer,
grade for plain cement concrete work, including
pumping of R.M.C. from transit mixer to site of
laying and curing, excluding the cost of
centering, shuttering and finishing, including
cost of curing, admixtures in recommended
proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve workability
without impairing strength and durability as per
direction of the Engineer - in - charge. Note : 1)
Excess/less cement used than specified in this
item is payable/ recoverable separately.
a) All works up to plinth level.
(i) M-15 grade plain cement concrete (cement
Metre
5505.00
Metre
5851.00
b) All works above plinth and up to floor V level.
(i) M-15 grade plain cement concrete. (cement
content considered @ 240 kg. /cum).
Metre
5979.00
Metre
5851.00
210805.00
60 Providing and laying in position specified grade
of reinforced cement concrete excluding the
cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
Metre
6866.00
b) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded
Metre
5552.00
Metre
5156.00
Total of the Sub-Head - Concrete Work :
Sub-Head : Reinforced Cement Concrete
61 Reinforced cement concrete work in walls (any
thickness), including attached pilasters,
buttresses, plinth and string courses, fillets,
columns, pillars, piers, abutments, posts and
struts etc. up to floor five level excluding cost of
centering, shuttering, finishing and
reinforcement :
Metre
7633.00
b) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded
Metre
6319.00
Metre
5923.00
62 Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15
landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral
stair cases up to floor five level excluding the
cost of centering, shuttering, finishing and
reinforcement with 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal
size).
Metre
6107.00
63 Providing and laying up to floor five level
reinforced cement concrete in kerbs, steps and
the like excluding the cost of centering,
shuttering, finishing and reinforcement with
1:2:4 (1 cement : 2 coarse sand : 4graded stone
Metre
5731.00
64 Reinforced cement concrete work in arches,
arch ribs, domes, vaults, shells, folded plate and
roofs having slope more than 15 up to floor
five level excluding the cost of centering,
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
Metre
6350.00
65 Reinforced cement concrete work in chimneys,
shafts, up to floor five level excluding the cost
of centering, shuttering, finishing and
reinforcement with 1:2:4 (1 cement : 2 coarse
size).
Metre
6013.00
66 Reinforced cement concrete work in well-
steining excluding the cost of centering,
1:2:4 (1 cement :2 coarse sand : 4 graded stone
Metre
4949.00
67 Reinforced cement concrete work in vertical
and horizontal fins individually or forming box
louvers, facias and eaves boards up to floor five
level excluding the cost of centering, shuttering,
finishing and reinforcement with 1:1:3 (1
cement : 1 coarse sand : 3 graded stone
Metre
5974.00
68 Centering and shuttering including strutting,
propping etc. and removal of form for :
a) Foundations, footings, bases of columns, etc.
for mass concrete.
Metre
186.00
b) Walls (any thickness) including attached
pilasters, butteresses, plinth and string courses
etc.
Metre
335.00
c) Suspended floors, roofs, landings, balconies and
access platform.
Metre
372.00
d) Shelves (Cast in situ) 1.00 Sqm 371.80 One Square
Metre
372.00
e) Lintels, beams, plinth beams, girders,
bressumers and cantilevers.
Metre
310.00
f) Columns, Pillars, Piers, Abutments, Posts and
Struts.
Metre
423.00
g) Stairs, (excluding landings) except spiral-
staircases.
Metre
376.00
h) Spiral staircases (including landing). 1.00 Sqm 339.85 One Square
Metre
340.00
i) Arches, domes, vaults up to 6 m span 1.00 Sqm 1006.65 One Square
Metre
1007.00
j) Extra for arches, domes, vaults exceeding 6 m
span
Metre
440.00
k) Chimneys and shafts 1.00 Sqm 334.50 One Square
Metre
335.00
l) Well steining 1.00 Sqm 214.55 One Square
Metre
215.00
m) Vertical and horizontal fins individually or
forming box louvers band, facias and eaves
boards.
Metre
551.00
n) Extra for shuttering in circular work (20% of
respective centering and shuttering items).
Metre
0.00
o) Small lintels not exceeding 1.5m clear span,
moulding as in cornices, window sills, string
courses, bands, copings, bed plates, anchor
blocks and the like.
Metre
186.00
p) Edges of slabs and breaks in floors and walls.
(i) Under 20 cm wide 1.00 m 111.70 One Metre 112.00
(ii) Above 20 cm wide 1.00 Sqm 490.40 One Square
Metre
490.00
q) Cornices and mouldings 1.00 Sqm 536.20 One Square
Metre
536.00
r) Small surfaces such as cantilever ends, brackets
and ends of steps, caps and bases to pilasters
and columns and the like.
Metre
458.00
s) Weather shade, Chajjas, corbels etc., including
edges.
Metre
468.00
t) Suspended floors, roofs, landings, balconies and
access platform. with water proof ply 12mm
thick.
Metre
463.00
u) Lintels, beams, plinth beams, girders,
bressumers and cantilevers. with water proof
ply 12mm thick.
Metre
400.00
69 Providing and fixing tie bolt, spring coil and
plastic cone in wall shuttering complete as per
the direction of Engineer-in-charge.
a) 12 mm dia. & 100 mm length. 1.00 sets 140.25 Each Set 140.00
b) 12 mm dia. & 150 mm length. 1.00 sets 151.90 Each Set 152.00
c) 20 mm dia. & 150 mm length. 1.00 sets 169.30 Each Set 169.00
d) 20 mm dia.& 225 mm length. 1.00 sets 186.75 Each Set 187.00
70 Extra for additional height in centering,
shuttering where ever required with adequate
bracing, propping etc. including cost of de-
shuttering and decentering at all levels, over a
height of 3.5 m, for every additional height of 1
metre or part thereof (Plan area to be
measured)
a) Suspended floors, roofs, landing, beams and
balconies (Plan area to be measured).
Metre
146.00
71 Providing, hoisting and fixing up to floor five
level precast reinforced cement concrete work
in string courses, bands, copings, bed plates,
anchor blocks, plain window sills and the like
including the cost of required centering,
shuttering but excluding cost of reinforcement,
with1:2:4 (1 cement: 2 coarse sand: 4 graded
stone aggregate 20mmnominal size).
Metre
5830.00
level precast reinforced cement concrete in
small lintels not exceeding 1.5m clear span up
to floor five level including the cost of required
centering, shuttering but excluding the cost of
reinforcement, with 1:2:4 (1 cement : 2 coarse
sand: 4 graded stone aggregate 20mm nominal
size).
Metre
8042.00
mouldings as in cornices, windows sills etc.
including setting in cement mortar 1:3 (1
cement : 3 coarse sand) cost of required
centering, shuttering but excluding the cost of
reinforcement, with 1:2:4(1 cement : 2 coarse
size).
Metre
9044.00
lintels, beams and bressumers including setting
in cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering and shuttering
but excluding the cost of reinforcement, with
1:2:4 (1cement : 2 coarse sand : 4 graded stone
Metre
7484.00
shelves including setting in cement mortar 1:3
(1cement : 3 coarse sand), cost of required
centering, shuttering and finishing with neat
cement punning on exposed surfaces but
excluding the cost of reinforcement, with 1:2:4
(1 cement : 2 coarse sand : 4graded stone
aggregate 12.5mm nominal size).
Metre
11104.00
vertical & horizontal fins individually or forming
box louvers setting in cement mortar 1:2 (1
cement : 2 coarse sand)including the cost of
required centering, shuttering but excluding the
cost of reinforcement, with 1:2:4 (1 cement : 2
nominal size).
Metre
6520.00
77 Providing precast cement concrete Jali 1:2:4 (1
aggregate 6mm nominal size) reinforced with
1.6 mm dia mild steel wire including centering
and shuttering, roughening cleaning, fixing and
finishing in cement mortar 1:3 (1 cement: 3 fine
sand) etc. complete excluding plastering of the
jambs, sills and soffits.
a) 50 mm thick 1.00 Sqm 683.80 One Square
Metre
684.00
b) 40 mm thick 1.00 Sqm 598.35 One Square
Metre
598.00
c) 25 mm thick 1.00 Sqm 563.45 One Square
Metre
563.00
78 Encasing rolled steel sections, in beams and
columns, with cement concrete 1:2:4 (1
cement: 2 coarse sand: 4 graded stone
aggregate12.5mm nominal size) including
centering and shuttering complete but
excluding cost of reinforcement.
Metre
8172.00
79 Encasing rolled steel section in grillages with
cement concrete 1:2:4 (1 cement: 2 coarse
sand: 4 graded stone aggregate 12.5 mm
nominal size), including centering and
shuttering but excluding cost of expanded
metal and hangers.
Metre
5437.00
80 Extra for providing and fixing expanded metal
mesh of size 20x60 mm and strands 3.25 mm
wide 1.6 mm thick weighing 3.64 kg per sqm for
encasing of rolled steel sections in beams,
columns and grillages, excluding cost of
hangers.
Metre
379.00
81 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete up to plinth
level.
a) Mild steel and Medium Tensile steel bars. 1.00 Kg 64.05 One Kilogram 64.00
b) Hard drawn steel wire 1.00 Kg 75.75 One Kilogram 76.00
c) Cold twisted bars 1.00 Kg 66.50 One Kilogram 67.00
d) Hot rolled deformed bars 1.00 Kg 66.50 One Kilogram 67.00
e) Hard drawn steel wire fabric 1.00 Kg 74.55 One Kilogram 75.00
f) Thermo-Mechanically Treated bars. 1.00 Kg 66.50 One Kilogram 67.00
82 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete above plinth
level.
a) Mild steel and Medium Tensile steel bars. 1.00 Kg 64.05 One Kilogram 64.00
b) Hard drawn steel wire 1.00 Kg 75.75 One Kilogram 76.00
c) Cold twisted bars 1.00 Kg 66.50 One Kilogram 67.00
d) Hot rolled deformed bars 1.00 Kg 66.50 One Kilogram 67.00
e) Hard drawn steel wire fabric 1.00 Kg 74.55 One Kilogram 75.00
f) Thermo-Mechanically Treated bars. 1.00 Kg 66.50 One Kilogram 67.00
83 Smooth finishing of the exposed surface of
R.C.C. work with 6 mm thick cement mortar 1:3
(1 Cement : 3 fine sand)
Metre
120.00
84 Extra for rendering smooth the top of
suspended floors, landings and staircases
(treads and risers) with cement mortar 1:2 (1
cement : 2coarse sand) including a floating coat
of neat cement and protecting the surface with
a layer of 7.5 cm of earth laid over 15 mm of
fine sand incase of suspended floor and bricks
laid in mud mortar in case of landings and steps
including subsequent removal and cleaning of
the same.
Metre
80.00
85 Providing and fixing in position copper plate as
per design for expansion joints.
1.00 Kg 324.70 One Kilogram 325.00
86 Providing and filling in position, blown bitumen
in expansion joints.
1.00 units 532.05 per cm depth
per cm width
per 100m
532.00
87 Providing and filling in position bitumen mix
filler of Proportion 80 kg. of hot bitumen, 1 kg.
of cement and 0.25 cubic metre of coarse sand
for expansion joints.
per cm width
per 100m
186.00
88 Providing and fixing in position 12mm thick
bitumen impregnated fiber board conforming to
IS: 1838 including cost of primer, sealing
compound in expansion joints.
per 100m
436.00
89 Providing and fixing sheet covering over
expansion joints with iron screws as per design.
a) Non-asbestos fiber cement board 6 mm thick as
per IS: 14862
(i) 150mm wide. 1.00 m 114.05 One Metre 114.00
(ii) 200mm wide. 1.00 m 153.25 One Metre 153.00
b) Aluminium fluted strips 3.15mm thick.
(i) 150mm wide. 1.00 m 324.10 One Metre 324.00
(ii) 200mm wide. 1.00 m 452.80 One Metre 453.00
90 Add for plaster drip course/ groove in plastered
surface or moulding to R.C.C. projections.
1.00 m 27.85 One Metre 28.00
91 Extra for laying reinforced cement concrete in
or under water and/ or liquid mud including
cost of pumping or bailing out water and
removing slush etc., complete. Note For Item
No. 5.31:- The quantity will be calculated by
multiplying the depth measured from the
subsoil water level up to the centre of gravity of
the R.C.C. under subsoil water with the quantity
of R.C.C. in cubic metre executed under subsoil
water. The depth of centre of gravity shall be
reckoned correct to 0.1 m. 0.05 m or more shall
be taken as 0.1 m and less than 0.05 m ignored.
No extra payment shall be made for placing
reinforcement or centering & shuttering under
sub - soil water conditions.
Metre
386.00
Note : The quantity will be calculated by
multiplying the depth measured from the
subsoil water level up to the centre of gravity of
the R.C.C. under subsoil water with the quantity
of R.C.C. in cubic metre executed under subsoil
water. The depth of centre of gravity shall be
reckoned correct to 0.1 m. 0.05 m or more shall
be taken as 0.1 m and less than 0.05 m ignored.
No extra payment shall be made for placing
reinforcement or centering & shuttering under
sub - soil water conditions.
92 Extra for laying reinforced cement concrete in
or under foul positions.
Metre
156.00
93 Providing and laying in position machine
batched and machine mixed design mix M-25
grade cement concrete for reinforced cement
concrete work, using cement content as per
approved design mix, including pumping of
concrete to site of laying but excluding the cost
of centering, shuttering, finishing and
reinforcement, including admixtures in
recommended proportions as per IS: 9103 to
accelerate, retard setting of concrete, improve
workability without impairing strength and
durability as per direction of Engineer-in-
charge. (Note :- Cement content considered in
this item is @ 330 kg/cum. Excess/less cement
used as per design mix is payable/recoverable
separately).
a) All works up to plinth level. 1.00 Cum 5704.45 One Cubic
Metre
5704.00
b) All works above plinth level up to floor V level. 1.00 Cum 6353.00 One Cubic
Metre
6353.00
94 Extra for providing richer mixes at all floor
levels.
a) Providing M-30 grade concrete instead of M-25
grade BMC/RMC. (Note:- Cement content
considered in M-30 is @340 kg/cum).
Metre
64.00
b) Providing M-35 grade concrete instead of M-25
grade BMC/RMC. (Note : Cement content
Metre
128.00
c) Providing M-40 grade concrete instead of M-25
grade BMC/RMC.(Note : Cement content
Metre
193.00
95 Add for using extra cement in the items of
design mix over and above the specified cement
content therein.
1.00 Qtl 619.65 One Quintal 620.00
96 Providing and placing in position precast
reinforced cement concrete waffle units, square
or rectangular, as per design and shape for
floors and roofs in 1:1:3 (1 Cement : 1
nominal size), including flush or deep ruled
pointing at joints in Cement mortar 1:2 (1
Cement : 2 Fine sand), making necessary holes
of required sizes for carrying through service
lines etc., providing steel hooks for lifting etc,
form work in precasting, handling, hoisting,
centering and erection complete for all floor
levels but excluding the cost of reinforcement.
Metre
15894.00
97 Providing and laying in position ready mixed M-
25 grade concrete for reinforced cement
concrete work, using cement content as per
approved design mix, manufactured in fully
automatic batching plant and transported to
site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per
mix design of specified grade for reinforced
cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying ,
excluding the cost of centering, shuttering
finishing and reinforcement, including cost of
admixtures in recommended proportions as per
IS : 9103 to accelerate/ retard setting of
concrete, improve workability without
impairing strength and durability as per
direction of the Engineer - in - charge. (Note :-
Cement content considered in this item is @
330 kg/cum. Excess/less cement used as per
design mix is payable/recoverable separately).
a) All works upto plinth level 1.00 cum 6052.90 One Cubic
Metre
6053.00
b) All works above plinth level upto floor V level 1.00 cum 6701.45 One Cubic
Metre
6701.00
98 Extra for R.C.C./ B.M.C/ R.M.C. work above floor
V level for each fourfloors or part thereof.
1.00 cum 174.20 One Cubic
Metre
174.00
99 Providing and laying in position ready mixed M-
25 grade concrete for reinforced cement
concrete work, using fly ash and cement
content as per approved design mix, and
manufactured in fully automatic batching plant
and transported to site of work in transit mixer
for all leads, having continuous agitated mixer,
grade for reinforced cement concrete work,
including pumping of R.M.C. from transit mixer
to site of laying, excluding the cost of
centering,shuttering, finishing and
reinforcement, including cost of admixtures in
recommended proportions as per IS : 9103 to
accelerate / retard setting of concrete, improve
workability without impairing strength and
durabilityas per direction of the Engineer - in -
charge.NOTE- (1) Cement content considered in
this item is @ 330 kg/cum. Excess/ less cement
used as per design mix is payable/ recoverable
separately.(2) Fly ash conforming to grade I of
IS 3812 (Part-1) only be used as part
replacement of OPC as per IS : 456. Uniform
blending with cement to be ensured in
accordance with clauses 5.2 and 5.2.1 of IS:456 -
2000 inthe items of BMC and RMC.
a) All works up to Plinth level. 1.00 cum 5967.95 One Cubic
Metre
5968.00
b) All works above plinth & up to floor V level. 1.00 cum 6616.50 One Cubic
Metre
6617.00
100 Supplying and applying pre tested and approved
water based concrete curing compound to
concrete/ masonry surface, all as per
manufacturers specification and direction of
Engineer-in-charge.
a) Non pigmented wet curing compound 1.00 sqm 99.85 One Square
Metre
100.00
b) Pigmented wet curing compound 1.00 sqm 113.80 One Square
Metre
114.00
101 Providing and fixing tapered / parallel threaded
couplers conforming to IS code on
Reinforcement Couplers for Mechanical Splices
of Bars for Concrete Reinforcement -
Specification, to reinforcement bars including
threading, enlargement at connection by
forging, protecting the prepared reinforcement
bars and related operations as required to
complete the works per direction of Engineer-in-
Charge. (The length of the bars in which coupler
is to be provided should not be less than 4
metre, no deduction for labour and binding
wire saved for not providing lap length shall be
made).
a) Coupler for 16 mm diameter reinforcement bar 1.00 No. 120.35 Each 120.00
b) Coupler for 20 mm diameter reinforcement bar 1.00 No. 163.55 Each 164.00
c) Coupler for 25 mm diameter reinforcement bar 1.00 No. 226.60 Each 227.00
d) Coupler for 28 mm diameter reinforcement bar 1.00 No. 312.65 Each 313.00
e) Coupler for 32 mm diameter reinforcement bar 1.00 No. 363.20 Each 363.00
102 Providing and fixing in position Stainless steel
Grade 304 plate-1.0 mm thick as per design for
expansion joints.
a) 200 mm wide. 1.00 metre 571.50 One Metre 572.00
b) 300 mm wide. 1.00 metre 827.00 One Metre 827.00
103 Providing and fixing of expansion joint system
related with floor location as per drawings and
direction of Engineer-In-Charge. The joints
system will be of extruded aluminum base
members, self aligning / self centering
arrangement and support plates etc. as per
ASTM B221-02. The system shall be such that it
provides floor to floor /floor to wall expansion
control system for various vertical localtion in
load application areas that accommodates
multi directional seismic movement without
stress to it's components. System shall consist
of metal profiles with a universal aluminum
base member designed to accommodate
various project conditions and finish floor
treatments. The cover plate shall be designed of
width and thickness required to satisfy projects
movement and loading requirements and
secured to base members by utilizing
manufacturers pre-engineered self-centering
arrangement that freely rotates / moves in all
directions. The Self centering arrangement
shall exhibit circular sphere ends that lock and
slide inside the corresponding aluminum
extrusion cavity to allow freedom of movement
and flexure in all directions including vertical
displacement. Provision of Moisture Barrier
Membrane in the Joint System to have
a) Floor Joint of 100 mm gap 1.00 m 6334.05 One Metre 6334.00
b) Floor Joint of 150 mm gap 1.00 m 6958.35 One Metre 6958.00
c) Floor Joint of 200 mm gap 1.00 m 7466.50 One Metre 7467.00
related with wall joint (internal/external)
location as per drawings and direction of
Engineer-In- Charge. The joints shall be of
extruded aluminum base members, self aligning
/ centering arrangement and support plates as
per ASTM B221-02. The material shall be such
that it provides an Expansion Joints System
suitable for vertical wall to wall/ wall to corner
application, both new and existing construction
in office Buildings & complexes with no slipping
down tendency amongst the components of the
Joint System. The Joint System shall utilize light
weight aluminum profiles exhibiting minimal
exposed aluminum surfaces mechanically snap
locking the multi- cellular to facilitate
movement. (Material shall confirm to ASTM
6063.)
a) Wall Joint of 100 mm gap 1.00 m 5056.40 One Metre 5056.00
b) Wall Joint of 150 mm gap 1.00 m 5448.40 One Metre 5448.00
c) Wall Joint of 200 mm gap 1.00 m 5840.40 One Metre 5840.00
of approved make and manufactures for various
roof locations as per approved drawings and
direction of Engineer-In-Charge. The joints shall
be of extruded aluminum base members with,
self aligning and self centering arragement
support plates asper ASTM B221-02. The
system shall be such that it provides watertight
roof to roof/roof to corner joint cover
expansion control system that is capable of
accommodating multidirectional seismic
movement without stress to its components.
System shall consist of metal profile that
incorporates a universal aluminum base
member designed to accommodate various
project conditions and roof treatments. The
cover plate shall be designed of width and
thickness required to satisfy movement and
loading requirements and secured to base
members by utilizing manufacturers pre-
engineered self-centering arrangement that
freely rotates / moves in all directions. The Self
centering arrangement shall exhibit circular
sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to
allow freedom of movement and flexure in all
directions including vertical displacement. The
Joint System shall resists damage or
a) Roof Joint of 100 mm gap 1.00 m 6334.05 One Metre 6334.00
b) Roof Joint of 150 mm gap 1.00 m 6726.05 One Metre 6726.00
c) Roof Joint of 200 mm gap 1.00 m 7001.00 One Metre 7001.00
106 Providing and fixing in position factory made
precast RCC M-40 doors and windows frames
having excellent smooth finish as per IS: 6523
with reinforcement of 3 Nos, 6 mm dia main
bars tied with 3 mm M.S stirrups placed @ 200
mm C/C and 6 numbers high strength polymer
blocks of required size for fixing hinges
including providing 6 no specially designed M.S.
galvanised sleeves for accomodating 6 mm dia
fullythreaded bolts for fixing hold fast on
vertical members, providing suitable
arrangement for recieving sliding door bolts and
tower bolt etc all complete, as per the direction
of Engineer in charge. (The cost of holdfast and
cc block of 1:3:6 mix is also included in the
item.) The frame shall be measured in running
meter correct to two places of decimal.
a) Door frame 125 mmx 60 mm 1.00 m 412.80 One Metre 413.00
b) Door frame 100 mmx 60 mm 1.00 m 378.55 One Metre 379.00
c) Door frame 85 mmx60 mm 1.00 m 360.50 One Metre 361.00
107 Providing and laying Reinforced cement
concrete for construction of piers, abutments,
portal frames, pier caps and bearing pedestals
and seismic arresters over pier/ abutment caps
at all locations with specifiedgrade using
Ordinary Portland Cement (conforming to
strength requirement of IS:8112) including the
cost of steel centering and shuttering etc.
complete including testing of materials etc. for
casting pier & pier cap in one/two stage,
necessary tools, plants, machineryand all
related operations as required to complete the
work as per drawings and Specifications with all
leads, lifts and depths true to level and position
but excluding the cost of providing
reinforcement. Reinforcement shall be
measured and paid separately .Note:- Cement
content considered in this item is 480 Kg./ Cum.
Excess/less cement used as per design mix is
payable/ recoverable separately. Note:- Cement
content considered in this item is 480 Kg./ Cum.
Excess/less cement used as per design mix is
payable/ recoverable separately.
a) Reinforced Cement Concrete -M-50 1.00 cum 6113.45 One Cubic
Metre
6113.00
b) Reinforced Cement Concrete -M-60 1.00 cum 7230.00 One Cubic
Metre
7230.00
c) Extra for using M -50/ M60 Grade Self-
compacting Reinforced Cement Concrete
Metre
632.00
108 Constructing cast-in situ RCC diaphragm wall by
providing and laying machine batched, machine
mixed, self compacting, ready mix reinforced
cement concrete, tramie controlled, of M 30
grade using minimum 400kg. cement per cum
of concrete including providing and mixing
required admixtures in recommended
proportions as per IS : 9103, as approved by the
Engineer-in-charge, for achieving 150- 200mm
slump, fordiaphragm wall having thickness as
per approved structural design not exceeding
600 mm, in pannels of required depth and
lengths as per approved drawing, including
constructing necessary guide walls asrequired
and as specified including boring in all kinds of
soils and rocks, including working in or under
water and / or liquid mud, in foul conditions
and pumping or bailing out of water and
removing slush, including disposal of earth/
rock / slush etc. for all leads and all lifts,
including preparing, providing and re-circulating
bentonite slurry in the trench as and when
required for all depths, including agitating
bentonite slurry during trenching etc., providing
and fixing stop ends or form tubes, upto the
required depth of diaphragm wall including
extracting the same after casting, including
chipping off the bentonite adulterated concrete
Metre
13088.00
292373.00
109 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
foundation and plinth in:
a) Cement mortar 1:4 (1 cement : 4 coarse sand) 1.00 Cum 4847.85 One Cubic
Metre
4848.00
b) Cement mortar 1:6 (1 cement : 6 coarse sand) 1.00 Cum 4646.50 One Cubic
Metre
4647.00
110 Brick work with common burnt clay modular
bricks of class designation 7.5 in foundation and
plinth in:
Metre
4348.00
b) Cement Mortar 1:6 (1 cement : 6 coarse sand). 1.00 Cum 4170.75 One Cubic
Metre
4171.00
111 Brick work with common burnt clay machine
moulded perforated bricks of class designation
12.5 conforming to IS: 2222 -1991 in
superstructure above plinth level up to floor
five level in cement mortar 1:6 (1 cement : 6
coarse sand) :
a) With F.P.S.(non modular) bricks. 1.00 Cum 5210.35 One Cubic
Metre
5210.00
b) With Modular bricks. 1.00 Cum 4894.15 One Cubic
Metre
4894.00
Total of the Sub-Head - Reinforced Cement Concrete :
Sub-Head : Brick Work
112 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V
level in all shapes and sizes in :
Metre
5527.00
Metre
5325.00
113 Extra for brick work / AAC block masonry / Tile
brick masonry in superstructure above floor V
level for each four floors or part thereof by
mechanical means.
Metre
263.00
114 Extra for forming cavity 5 cm to 7.5 cm wide in
cavity walls with necessary weep and vent holes
including use of cores and cost of providing and
fixing bitumastic coated M .S. ties 300 mm long
of 25x3mm section at not less than 3 ties per
sqm as per approved design.
Metre
94.00
115 Providing half brick masonry with common
burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in cement mortar 1:3 (1 Cement
: 3 coarse sand) in superstructure for closing
cavity 5 to 7.5 cm wide in cavity wall complete
with 10 cm / 11.4 cm wide bitumen felt type 3
grade 1.
Metre
182.00
116 Brick work 7 cm thick with common burnt clay
F.P.S. (non modular) brick of class designation
7.5 in cement mortar 1:3 (1 cement : 3 coarse
sand) in superstructure above plinth level and
up to floor five level.
Metre
497.00
117 Brick work in plain arches in superstructure
above plinth level and up to floor five level
including centering and shuttering complete for
span up to 6 metres with common burnt clay
F.P.S. (non modular) bricks of class designation
7.5 in cement mortar 1:3 (1 cement : 3 coarse
sand).
Metre
8208.00
118 Brick work in gauged arches in superstructure
above plinth level and upto floor five level in
cement mortar 1:3 (1 cement : 3 coarse sand)
including centering and shuttering complete, for
span up to 6 meters with common burnt clay
7.5.
Metre
9728.00
119 Extra for additional cost of centering for arches
exceeding 6m span including all shuttering,
bolting, wedging and removal (Area of the soffit
to be measured).
Metre
440.00
120 Half brick masonry with common burnt clay
7.5 in foundations and plinth in.
a) Cement mortar 1:3 (1 cement : 3 coarse sand) 1.00 Sqm 597.25 One Square
Metre
597.00
b) Cement mortar 1:4 (1 cement : 4 coarse sand) 1.00 Sqm 574.70 One Square
Metre
575.00
121 Half brick masonry with common burnt clay
7.5 in superstructure above plinth level up to
floor V level.
a) Cement mortar 1:3 (1 cement :3 coarse sand) 1.00 Sqm 670.45 One Square
Metre
670.00
b) Cement mortar 1:4 (1 cement :4 coarse sand) 1.00 Sqm 647.90 One Square
Metre
648.00
122 Extra for half brick masonry in superstructure,
above floor V level for every four floors or part
thereof by mechanical means.
Metre
23.00
123 Extra for providing and placing in position 2
Nos. 6mmdia. M.S. bars at every third course of
half brick masonry.
Metre
70.00
124 Tile brick masonry with common burnt clay
F.P.S. (non modular) tile bricks of class
designation 10 in foundation and plinth in:
Metre
7413.00
b) Cement mortar 1:6 (1 cement : 6 coarse sand). 1.00 Cum 7070.90 One Cubic
Metre
7071.00
machine moulded tile bricks of class
designation 12.5 conforming to IS : 2690 (Part I)
- 1993 in foundation and plinth in cement
mortar 1:6 (1 cement : 6 coarse sand).
Metre
7271.00
designation 10 in superstructure above plinth
level up to floor V level in cement mortar 1:6 (1
cement : 6 coarse sand).
Metre
7812.00
designation 10 in plain arch work in
superstructure above plinth and up to floor five
level in cement mortar 1:4 (1 cement : 4 coarse
sand) including centering and shuttering
complete.
Metre
10550.00
designation 10 in gauged arch work in
superstructure above plinth and up to floor five
sand) including centering and shuttering
complete.
Metre
11984.00
129 Tile brick masonry work 5 cm thick with
common burnt clay F.P.S. (non modular) tile
bricks of class designation 10 in cement mortar
1:3 (1cement : 3 coarse sand) in superstructure
above plinth and upto floor five level.
Metre
499.00
130 Honey-comb brick work 10/11.4 cm thick with
common burnt clay bricks of class designation
7.5 in super structure above plinth level upto
floor V level with cement mortar 1:4 (1 cement
: 4 coarse sand).
Metre
422.00
131 Extra for laying brick work in or under water
and/or liquid mud including cost of pumping or
bailing out water and removing slush etc.
complete. NOTE :- The quantity will be
calculated by multiplying the depth measured
from sub - soil water level up to the centre of
gravity of brickwork under sub - water with the
quantity of brick work in cum executed under
the sub - soil water. The depth of centre of
gravity shall be reckoned correct to 0.1m.
0.05m or more shall be taken as 0.1 m and less
than 0.05m ignored.
1.00 units 385.60 cum/mtr
depth
386.00
132 Extra for laying brick work in or under foul
position.
Metre
156.00
133 Brick work with common burnt clay selected
7.5 in exposed brick work including making
horizontal and vertical grooves 10 mm wide 12
mm deep complete in cement mortar 1:6 (1
cement : 6 coarse sand)
a) From ground level upto plinth level. 1.00 Cum 4733.70 One Cubic
Metre
4734.00
b) Above plinth level upto floor V level. 1.00 Cum 5446.80 One Cubic
Metre
5447.00
134 Brick work with common burnt clay modular
bricks of class designation 75 in exposed brick
work including making horizontal and vertical
grooves 10mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand).
Metre
4198.00
Metre
4876.00
moulded modular bricks of class designation
12.5 in exposed brick work including making
horizontal and vertical grooves 10mm wide
12mm deep complete in cement mortar 1:6 (1
Metre
4622.00
Metre
5301.00
moulded F.P.S. (non modular) bricks of class
designation 12.5 in exposed brick work
including making horizontal and vertical
grooves 10 mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand).
Metre
4501.00
Metre
5154.00
moulded perforated F.P.S. (non modular) bricks
of class designation 12.5 conforming IS : 2222-
1991 in exposed brick work including making
horizontal and vertical grooves 10mm wide 12
mm deep complete in cement mortar 1:6 (1
Metre
4559.00
Metre
5237.00
moulded perforated modular bricks of class
designation 12.5 conforming to IS : 2222 -1991
in exposed brick work including making
horizontal and vertical grooves 10 mm wide
12mm deep complete in cement mortar 1:6 (1
Metre
4254.00
Metre
4933.00
139 Brick work with clay fly ash F.P.S. (non modular)
brick of class designation 7.5 in superstructure
above plinth level up to floor five level in :
Metre
5385.00
Metre
5184.00
140 Brick work with non modular fly ash lime bricks
(FALG Bricks) conforming to IS:12894-2002,
class designation 10 average compressive
strength in super structure above plinth level up
to floor V level in :
Metre
5301.00
b) Cement mortar 1:6 (1 cement : 6 Coarse sand) 1.00 Cum 5124.05 One Cubic
Metre
5124.00
141 Brick work with modular calcium silicate bricks
machine moulded conforming to IS:4139, class
designation 10 average compressive strength in
super structure above plinth level up to floor V
level in :
Metre
5471.00
b) Cement mortar 1:6 (1 cement : 6 Coarse sand) 1.00 Cum 5293.75 One Cubic
Metre
5294.00
142 Brick work with modular extruded brunt fly ash
clay sewer bricks (Conforming to IS: 4885 ) in
foundation and plinth :
a) Cement Mortar 1:4 ( 1 cement : 4 coarse sand) 1.00 Cum 4857.05 One Cubic
Metre
4857.00
143 Brick work with modular extruded brunt fly ash
clay sewer bricks (conforming to IS : 4885) in
arches in foundation and plinth in cement
mortar 1:3 ( 1 cement : 3 fine sand).
Metre
7688.00
144 Providing and laying autoclaved aerated cement
blocks masonry with 100mmthick AAC blocks in
super structure above plinth level up to floor V
sand ) The rate includes providing and placing in
position 2 Nos. 6 mm dia M.S. bars at every
third course of masonry work.
Metre
4827.00
145 Providing and laying Gypsum panel partitions
100mm thick with water proof Gypsum panels
of size 666x500x100mm, made of calcite
phosphor Gypsum fixed with tongue and
groove, jointed with bonding plaster as per
manufacturers specifications in superstrure
above plinth level up to floor V level. Gypsum
blocks will have a minimum compressive
strength of 9.3 kg/cm2
Metre
777.00
146 Extra for Gypsum panel Partitions in
superstructure above floor V level for every
four floors or part thereof.
Metre
60.00
147 Brick edging 7cm wide 11.4cm. deep to plinth
protection with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
including grouting with cement mortar 1:4 (1
cement : 4 fine sand).
Metre
39.00
148 Half brick masonry with non modular fly ash
lime Gypsum bricks (FALG bricks) class
designation 10, conforming to IS : 12894, in
super structure above plinth and upto floor V
level.
a) Cement mortar 1 : 3 (1 cement : 3 coarse sand) 1.00 Sqm 663.85 One Square
Metre
664.00
b) Cement mortar 1 : 4 (1 cement : 4 coarse sand) 1.00 Sqm 641.30 One Square
Metre
641.00
223657.00
149 Random rubble masonry with hard stone in
foundation and plinth including levelling up
with cement concrete 1:6:12 (1 cement : 6
nominal size) upto plinth level with :
a) Cement mortar 1:6 (1 cement : 6 coarse sand). 1.00 Cum 3410.50 One Cubic
Metre
3411.00
150 Random rubble masonry with hard stone in
superstructure above plinth level and upto floor
five level, including leveling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12
graded stone aggregate 20mm nominal size) at
window sills, ceiling level and the like.
a) Cement mortar 1:6 (1 cement : 6 coarse sand). 1.00 Cum 4087.25 One Cubic
Metre
4087.00
151 Extra for random rubble masonry with hard
stone in :
a) Square or rectangular pillars 1.00 Cum 336.35 One Cubic
Metre
336.00
b) Circular pillars. 1.00 Cum 994.20 One Cubic
Metre
994.00
Sub-Head : Stone Work
Total of the Sub-Head - Brick Work :
152 Extra for random rubble masonry with hard
stone curved on plan for a mean radius not
exceeding 6 m.
Metre
392.00
153 Coursed rubble masonry (first sort) with hard
stone in foundation and plinth with :
Metre
3935.00
154 Coursed rubble masonry (second sort) with
hard stone in foundation & plinth with :
Metre
3679.00
155 Coursed rubble masonry with hard stone (first
or second sort) in superstructure above plinth
level and upto floor five level.
a) Masonry work (first sort) , in cement mortar 1:6
(1 cement : 6 coarse sand)
Metre
4603.00
b) Masonry work (second sort) , in cement mortar
1:6 (1 cement : 6 coarse sand)
Metre
4346.00
156 Extra for coursed rubble masonry with hard
stone (first or second sort) in :
Metre
374.00
b) Circular pillars. 1.00 Cum 1127.80 One Cubic
Metre
1128.00
157 Extra for coursed rubble masonry with hard
stone (first or second sort) curved on plan for a
mean radius not exceeding 6 m.
Metre
427.00
158 Stone work in plain ashlar in super structure
upto floor five level in cement mortar 1:6 (1
cement : 6 coarse sand) including pointing with
cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching
the stone shade :
a) One face dressed.
(i) Red sand stone 1.00 Cum 26283.00 One Cubic
Metre
26283.00
(ii) White sand stone 1.00 Cum 27057.00 One Cubic
Metre
27057.00
b) Both face dressed.
(i) Red sand stone. 1.00 Cum 34201.00 One Cubic
Metre
34201.00
Metre
34975.00
159 Stone work plain ashlar in arches in super
structure upto floor V level in cement mortar
1:3 (1 cement : 3 coarse sand) including
centring, shuttering and pointing with white
the stone shade.
a) One face dressed
Metre
30544.00
Metre
31318.00
b) Both face dressed
Metre
38462.00
Metre
39236.00
160 Stone work plain ashlar in domes , in super
structure upto floor V level in cement mortar
centring, shuttering and pointing with white
the stone shade.
a) One face dressed
Metre
46145.00
Metre
46919.00
b) Both face dressed
Metre
65786.00
Metre
66560.00
161 Stone work ashlar punched (ordinary) in
superstructure upto floor five level in cement
mortar 1:6 (1 white cement : 6 coarse sand)
including pointing with cement mortar 1:2 (1
white cement : 2 stone dust) with an admixture
of pigment matching the stone shade.
a) One face Punched
Metre
25068.00
(ii) White sand stone. 1.00 Cum 25840.00 One Cubic
Metre
25840.00
b) Both faced punched
Metre
31770.00
(ii) White sand stone. 1.00 Cum 32543.00 One Cubic
Metre
32543.00
162 Extra for stone work, random rubble / coursed
rubble masonry / ashlar masonry above floor V
level for every four floors or part thereof.
Metre
690.00
163 Extra for plain ashlar or ashlar punched in :
Metre
1771.00
164 Extra for stone work; plain ashlar or ashlar
punched curved on plan with a mean radius not
exceeding 6 m.
Metre
1233.00
165 Extra for additional cost of centering for arches
exceeding 6m span including all strutting,
bolting, wedging etc. and removal (area of soffit
to be measured).
Metre
440.00
166 Stone work ashlar sunk or moulded or sunk and
moulded upto floor five level in cement mortar
pointing with white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment matching the stone shade :
a) Red sand stone 1.00 Cum 36386.00 One Cubic
Metre
36386.00
b) White sand stone 1.00 Cum 37160.00 One Cubic
Metre
37160.00
167 Extra for stone work ashlar sunk or moulded or
sunk and moulded or carved in :
a) Triangular or Square or rectangular pillars 1.00 Cum 2310.00 One Cubic
Metre
2310.00
b) Circular or polygonal pillars 1.00 Cum 6546.00 One Cubic
Metre
6546.00
168 Extra for stone work ashlar sunk or moulded in
cornices.
1.00 units 20.80 per metre per
cm girth
21.00
169 Stone work (machine cut edges) for wall lining
etc. (veneer work) upto 10 metre height,
backing filled with a grout of average 12 mm
thick cement mortar 1:3 (1 cement : 3 coarse
sand) including pointing in white cement mortar
1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade
: (To be secured to the backing and the sides by
means of cramps and pins which shall be paid
for separately) :
a) Red sand stone - exposed face fine dressed with
rough backing.
(i) 70 mm thick. 1.00 Sqm 2410.75 One Square
Metre
2411.00
(ii) 60 mm thick. 1.00 Sqm 2306.70 One Square
Metre
2307.00
(iii) 50 mm thick. 1.00 Sqm 2202.85 One Square
Metre
2203.00
(iv) 40 mm thick. 1.00 Sqm 2098.60 One Square
Metre
2099.00
(v) 30 mm thick. 1.00 Sqm 1994.50 One Square
Metre
1995.00
b) Red sand stone - Exposed face machine cut and
table rubbed with rough backing.
(i) 70 mm thick 1.00 Sqm 3192.65 One Square
Metre
3193.00
(ii) 60 mm thick 1.00 Sqm 3088.60 One Square
Metre
3089.00
(iii) 50 mm thick 1.00 Sqm 2984.80 One Square
Metre
2985.00
(iv) 40 mm thick 1.00 Sqm 2880.55 One Square
Metre
2881.00
(v) 30 mm thick 1.00 Sqm 2776.40 One Square
Metre
2776.00
c) White sand stone - exposed face fine dressed
with rough backing .
Metre
2465.00
Metre
2353.00
Metre
2242.00
Metre
2129.00
Metre
2018.00
d) White sand stone - Exposed face machine cut
and table rubbed with rough backing.
Metre
3247.00
Metre
3135.00
Metre
3024.00
Metre
2911.00
Metre
2800.00
170 Extra for stone work (veneer work) curved on
plan with a mean radius not exceeding 6 m.
Metre
1771.00
171 Providing and fixing stainless steel cramps of
required size and shape for anchoring stone
wall lining to the backing or securing adjacent
stones in stone wall lining in cement mortar 1:2
(1 cement : 2 coarse sand) including making the
necessary chases in stone and holes in walls
wherever required.
1.00 Kg 566.80 One Kilogram 567.00
172 Providing and fixing stone dowels 10x5x2.50 cm
cut to double wedge shape as per design in
including making the necessary chases.
1.00 No. 34.45 Each 34.00
173 Providing and fixing copper pins 7.5 cm long 6
mm diameter for securing adjacent stones in
stone wall lining in cement mortar 1:2 (1cement
: 2 coarse sand) including making the necessary
chases.
1.00 No. 29.10 Each 29.00
174 Providing and fixing sloping chajja of stone 40
mm thick and upto 80 cm wide beyond the wall
as measured along the slope in cement mortar
1:4 (1 cement : 4 coarse sand) with 12mm
diameter anchoring steel bar 45 cm long fixed
in each stone and supported on and including
with bricks cove in cement mortar 1:4 (1
cement : 4 coarse sand) including pointing in
the stone shade:
a) Red sand stone:
(i) With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5
Metre
1189.00
b) White sand stone:
(i) With common burnt clay F.P.S.(non modular)
Metre
1221.00
175 Providing and fixing horizontal chajja of stone
40 mm thick and upto 80 cm projection in
including pointing in white cement mortar 1:2
(1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade: :
a) Red sand stone 1.00 Sqm 724.15 One Square
Metre
724.00
b) White sand stone 1.00 Sqm 752.05 One Square
Metre
752.00
176 30mm red sand stone sun-shade (chisel-
dressed) supported on red sand stone brackets,
fixed in walls with cement mortar 1:4 (1 cement
: 4 coarse sand) including finishing complete.
Metre
783.00
177 Providing and fixing red sand stone brackets
55x22.5x45cm sunk and moulded including
providing and fixing with 4 Nos. gun metal
cramp 25x6mm 30 cm long and dowel bars 7.5
cm long 6 mm dia as per design.
1.00 No. 2714.65 Each 2715.00
178 Stone work, plain in copings, cornices, string
courses and plinth courses, upto 75 mm thick in
Cement mortar 1:6 (1 cement : 6 coarse sand)
including pointing with white cement mortar
1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade.
a) Red sand stone 1.00 Cum 35767.40 One Cubic
Metre
35767.00
b) White sand stone 1.00 Cum 36540.75 One Cubic
Metre
36541.00
179 Providing and fixing stone jali 40mm thick
throughout in cement mortar 1:3 (1 cement : 3
coarse sand) including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment, matching the stone
shade, jali slab without any chamfers etc.
Metre
8615.00
Metre
8641.00
180 Extra for laying stone work in or under water
and/or liquid mud including cost of pumping of
bailing out water and removing slush etc.,
complete. (NOTE:-The quantity will be
calculated by multiplying the depth measured
from sub-soil water level upto the centre of
gravity of stone work under sub-water with the
quanity of stone work in cum executed under
the sub-soil water. The depth of centre of
gravity shall be reckoned correct to 0.1m 0.05m
or more shall be taken as 0.1m and less than
0.05m ignored).
1.00 units 385.60 cum/ mtr
depth
386.00
181 Extra for laying stone work in or under foul
position.
Metre
156.00
182 Wall lining butch work upto 10m height with
Dholpur stone 40 mm thick rough facing on the
exposed surface with stone strips of minimum
length 300 mm and required width including
embedding every tenth layer and bottom most
layer in masonry or concrete after making
necessary chases of size 75x75mm and by
providing layer of 75mmthick strips i/c 12mm
thick bed of cement mortar 1:3 (1 Cement : 3
coarse sand) i/c ruled pointing in cement
mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment to match the shade of
stone complete as per direction of Engineer-in-
charge.
Metre
1381.00
183 Stone work ( machine cut edges veneer work)
for wall lining upto 10 m height backing filled
with a grout of 12mm thick cement mortar 1:3
(1 Cement : 3 coarse sand) and jointed with
Cement mortar 1:2 (1 cement : 2 stone dust)
including rubbing and polishing complete. (To
be secured to the backing and the sides by
means of cramps and pins which shall be paid
for separately)
a) Kota stone slabs exposed face dressed and
rubbed.
Metre
1447.00
184 Stone tile work for wall lining upto 10 m height
with special adhesive over 12mm thick bed of
including pointing in white cement with an
admixture of pigment to match the stone
shade.
a) 8mm thick (mirror polished and machine cut
edge)
(i) Granite stone of any colour and shade. 1.00 Sqm 1639.45 One Square
Metre
1639.00
(ii) Raj Nagar plain white marble/ Udaipur green
marble/ Zebra black marble.
Metre
1401.00
185 Extra for stone work for wall lining on exterior
walls of height more than 10 m from ground
level for every additional height of 3 m or part
thereof.
Metre
78.00
186 Providing and fixing dry cladding upto 10 metre
heights with 30mm thick gang saw cut stone
with (machine cut edges) of uniform colour and
size upto 1mx1m, fixed to structural steel frame
work and/ or with the help of cramps, pins etc.
and sealing the joints with approved weather
sealant as per Architectural drawing and
direction of Engineer-in-charge. (The steel
frame work, stainless steel cramps and pins etc.
shall be paid for separately.)
a) Red sand stone. 1.00 Sqm 2351.40 One Square
Metre
2351.00
Metre
2385.00
187 Providing and fixing structural steel frame (for
dry cladding with 30 mm thick gang saw cut
with machine cut edges sand stone) on walls at
all heights using M.S. square/ rectangular tube
in the required pattern as per architectural
drawing including cost of cutting, bending,
welding etc. The frame work shall be fixed to
the wall with the help of MS brackets/lugs of
angle iron/ flats etc. which shall be welded to
the frame and embedded in brick wall with
cement concrete block 1:2:4 (1 cement :2
nominal size) of size 300x230x300mm including
cost of necessary centring and shuttering and
with approved expansion hold fasteners on
CC/RCC surface, including drilling necessary
holes. Approved cramps/ pins etc. shall be
welded to the frame work to support stone
cladding, the steel work will be given a priming
coat of Zinc primer as approved by Engineer-in-
charge and painted with two or more coats of
epoxy paint (Shop drawings shall be submitted
by the contractor to the Engineer-in-charge for
approval before execution). The frame work
shall be fixed in true horizontal & vertical
lines/planes. (Only structural steel frame work
shall be measured for the purpose of payment,
stainless steel cramps shall be paid for
1.00 Kg 134.50 One Kilogram 135.00
188 Providing and fixing adjustable stainless steel
cramps of approved quality, required shape and
size, adjustable with stainless steel nuts, bolts
and washer (total weight not less than 260
gms), for dry stone cladding fixed on frame
work at suitable location, including making
necessary recesses in stone slab, drilling
required holes etc complete as per direction of
the Engineer-in-charge.
1.00 No. 196.80 Each 197.00
880144.00 Total of the Sub-Head - Stone Work :
189 Marble work gang saw cut (polished and
machine cut) of thickness 18mm for wall lining
(veneer work), backing filled with a grout of
average 12 mm thick in cement mortar 1:3 (1
cement : 3 coarse sand) including pointing with
white cement mortar 1:2 (1 white cement : 2
marble dust) with an admixture of pigment to
match the marble shade: (To be secured to the
backing by means of cramps, which shall be
paid for separately).
a) Raj Nagar Plain white marble/ Udaipur green
(i) Area of slab upto 0.50 sqm 1.00 Sqm 2604.35 One Square
Metre
2604.00
(ii) Area of slab over 0.50 sqm 1.00 Sqm 2737.20 One Square
Metre
2737.00
190 Providing and fixing 18mm thick gang saw cut
mirror polished premoulded and prepolished)
machine cut for kitchen platforms, vanity
counters, window sills , facias and similar
locations of required size of approved shade,
colour and texture laid over 20mm thick base
joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to
edges to give high gloss finish etc. complete at
all levels.
a) Raj Nagar Plain white marble/ Udaipur green
(i) Area of slab upto 0.50 sqm. 1.00 Sqm 2200.25 One Square
Metre
2200.00
(ii) Area of slab over 0.50 sqm. 1.00 Sqm 2322.25 One Square
Metre
2322.00
b) Granite of any colour and shade
(i) Area of slab upto 0.50 sqm 1.00 Sqm 3724.70 One Square
Metre
3725.00
(ii) Area of slab over 0.50 sqm. 1.00 Sqm 3769.70 One Square
Metre
3770.00
191 Providing edge moulding to 18mm thick marble
stone counters, Vanities etc. including machine
polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-
Charge.
a) Marble work 1.00 metre 124.45 One Running
Metre
124.00
Sub-Head : Marble & Granite Work
b) Granite work. 1.00 metre 210.65 One Running
Metre
211.00
192 Extra for fixing marble / granite stone, over and
above corresponding basic item, in facia and
drops of width upto 150 mm with epoxy resin
based adhesive, including cleaning etc.
complete.
1.00 metre 225.75 One Running
Metre
226.00
193 Extra for providing opening of required size &
shape for wash basins/ kitchen sink in kitchen
platform, vanity counters and similar location in
marble / Granite / stone work, including
necessary holes for pillar taps etc. including
moulding, rubbing and polishing of cut edges
etc. complete.
1.00 No. 350.80 Each 351.00
194 Mirror polishing on marble work / Granite work
/ stone work where ever required to give high
gloss finish complete.
Metre
197.00
195 Providing and fixing cramps of required size &
shape in RCC/ CC / Brick masonry backing with
cement mortar 1:2 ( 1 cement :2 coarse sand),
including drilling necessary hole in stones and
embedding the cramp in the hole (fastener to
be paid separately).
a) Gunmetal cramps. 1.00 Kg 539.75 One Kilogram 540.00
b) Stainless steel cramps. 1.00 Kg 566.80 One Kilogram 567.00
196 Providing and fixing expansion hold fasteners
on C.C. /R.C.C./Brick masonry surface backing
including drilling necessary holes and the cost
of bolt etc complete.
a) Wedge expansion type
(i) Fastener with threaded dia 6 mm. 1.00 No. 26.05 Each 26.00
(ii) Fastener with threaded dia 10 mm. 1.00 No. 27.55 Each 28.00
(iii) Fastener with threaded dia 12 mm. 1.00 No. 42.95 Each 43.00
197 Stone tile (polished) work for wall lining over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and cement slurry @
3.3 kg/sqm including pointing in white cement
complete.
a) 8mm thick.
(i) Raj nagar plain white marble/ Udaipur green
Metre
1412.00
(ii) Granite of any colour and shade. 1.00 Sqm 1816.90 One Square
Metre
1817.00
198 Providing and fixing stone slab with table
rubbed, edges rounded and polished of size
75x50 cm deep and 1.8 cm thick fixed in urinal
partitions by cutting a chase of appropriate
width with chase cutter and embedding the
stone in the chase with epoxy grout or with
cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 6mm nominal
size) as per direction of Engineer-in-charge and
finished smooth.
a) White Agaria Marble Stone. 1.00 Sqm 2893.70 One Square
Metre
2894.00
b) Granite Stone of approved shade. 1.00 Sqm 2963.40 One Square
Metre
2963.00
199 Providing and fixing machine cut, mirror / egg
shell polished , Marble stone work for wall
lining (veneer work) including dado, skirting,
risers of steps etc., in required design and
pattern wherever required, stones of different
finished surface texture, on 12 mm (average)
sand) laid and jointed with white cement slurry
@ 3.3 kg/sqm including pointing with white
cement slurry admixed with pigment of
matching shade, including rubbing, curing,
polishing etc. all complete as per Architectural
drawings, and as directed by the Engineer- in-
Charge.
(a) 18 mm thick Italian Marble stone slab,
Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
Metre
6463.00
200 Providing and laying flamed finish Granite stone
flooring in required design and patterns, in
linear as well as curvilinear portions of the
building all complete as per the architectural
drawings with 18 mm thick stone slab over 20
mm (average) thick base of cement mortar 1:4
(1 cement :4 coarse sand) laid and jointed with
cement slurry and pointing with white cement
slurry admixed with pigment of matching shade
including rubbing , curing and polishing etc. all
complete as specified and as directed by the
Engineer-in-Charge :
(a) Flamed finish granite stone slab Jet Black,
Cherry Red, Elite Brown, Cat Eye or equivalent.
Metre
2782.00
38002.00 Total of the Sub-Head - Marble & Granite Work :
Sub-Head : Wood and PVC Work
201 Providing wood work in frames of doors,
windows, clerestory windows and other frames,
wrought framed and fixed in position with hold
fast lugs or with dash fasteners of required dia
& length ( hold fast lugs or dash fastener shall
be paid for separately).
a) Second class teak wood 1.00 Cum 90495.80 One Cubic
Metre
90496.00
b) Sal wood 1.00 Cum 73331.40 One Cubic
Metre
73331.00
c) Kiln seasoned and chemically treated hollock
wood.
Metre
50811.00
202 Providing laminated veneer lumber conforming
to IS:14616 and TAD -15: 2001( Part B) in
factory made frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixing in position with hold fast lugs
or with dash fasteners of required dia & length (
hold fast lugs or dash fastener shall be paid for
separately).
Metre
93979.00
203 Providing wood work in frames of false ceiling,
partitions etc. sawn and fixed in position :
a) Sal wood 1.00 Cum 69114.60 One Cubic
Metre
69115.00
b) Kiln seasoned and chemically treated hollock
wood.
Metre
46437.00
204 Extra for additional labour for circular works,
such as in frames of fan light :
a) Second class teak wood 1.00 Cum 9049.15 One Cubic
Metre
9049.00
b) Sal wood 1.00 Cum 7332.80 One Cubic
Metre
7333.00
c) Kiln seasoned and chemically treated hollock
wood.
Metre
5081.00
205 Providing and fixing panelled or panelled and
glazed shutters for doors, windows and
clerestory windows including ISI marked M.S.
pressed butt hinges bright finished of required
size with necessary screws excluding, panelling
which will be paid for separately, all complete
as per direction of Engineer-in-charge.
a) Second class teak wood
(i) 35 mm thick shutters 1.00 Sqm 2563.75 One Square
Metre
2564.00
(ii) 30 mm thick shutters 1.00 Sqm 2290.40 One Square
Metre
2290.00
wood.
Metre
1619.00
Metre
1476.00
c) Kiln seasoned selected planks of sheesham
wood.
Metre
2378.00
Metre
2116.00
206 Providing and fixing 35 mm thick factory made
laminated veneer lumber door shutter
conforming to IS : 14616 and TADS 15:2001
(Part B) including ISI marked M.S. pressed butt
hinges bright finished of required size with
necessary screws, all complete as per directions
of Engineer-in-charge and panelling with panels
of:
a) 12mm thick plain grade - 1, medium density flat
pressed three layer particle board FPT - I or
graded wood particle board FPT -I, IS : 3087
marked, bonded with BWP type synthetic resin
adhesive as per IS : 848 :
Metre
2428.00
b) 12 mm thick pre-laminated particle board
(decorative lamination on both sides) grade - 1,
medium density flat pressed, three layer
particle board FPT - I or graded wood particle
board FPT - I, conforming to IS : 3087 bonded
with BWP type synthetic resin adhesive as per
IS : 848 and pre-laminated conforming to IS :
12823 Grade 1, Type - II marked:
Metre
2638.00
c) 12 mm thick one side Pre-laminated particle
board (decorative lamination on one side and
other sides balancing lamination)grade - 1
medium density flat pressed, three layer
particleboard FPT - I or graded wood particle
board FPT-1 conforming to IS : 3087 bonded
with BWP type synthetic resin adhesive as per
IS : 848 and pre-laminated conforming to IS :
12823 Grade-1, Type II marked:
Metre
2545.00
207 Providing and fixing panelling or panelling and
glazing in panelled or panelled and glazed
shutters for doors, windows and clerestory
windows (Area of opening for panel inserts
excluding portion inside grooves or rebates to
be measured). Panelling for panelled or
panelled and glazed shutters 25 mm to40 mm
thick :
a) Second class teak wood 1.00 Sqm 2056.10 One Square
Metre
2056.00
wood.
Metre
1294.00
c) Ply wood 5 ply, 9 mm thick :
(i) Decorative plywood both side decorative
veneer (Type - I) conforming to IS 1328 BWR
type.
Metre
1863.00
(ii) Decorative plywood one side decorative veneer
and commercial veneer on other face (Type 1)
conforming to IS1328 BWR Type
Metre
1596.00
d) Ply wood 7 ply, 9 mm thick :
(i) Decorative plywood one side decorative veneer
and commercial veneer on other face (Type 1)
conforming to IS1328 BWR Type
Metre
1708.00
e) Particle Board 12 mm thick
(i) Plain particle board flat pressed, 3 layer or
graded wood particle board medium density
Grade I, IS : 3087 marked.
Metre
870.00
(ii) Veneered flat pressed three layer or graded
wood particle board with commercial veneering
on both sides conforming toIS:3097, grade I.
Metre
1117.00
(iii) Pre-laminated particle board with decorative
lamination on one side and balancing
lamination on other side, Grade I, Type II, IS:
12823 marked.
Metre
1455.00
(iv) Pre-laminated particle board with decorative
lamination on both sides, Grade I, Type II,
IS:12823 marked.
Metre
1511.00
f) Coir Veneer Board (conforming to IS 14842)
Metre
1328.00
g) Float glass panes
(i) 4 mm thick glass pane 1.00 Sqm 1098.10 One Square
Metre
1098.00
(ii) 5.5 mm thick glass panes 1.00 Sqm 1317.50 One Square
Metre
1318.00
h) Fly proof stainless steel grade 304 wire gauge
with 0.5 mm dia. Wire and 1.4 mm wide
aperture with matching wood beading
Metre
1549.00
208 Providing and fixing glazed shutters for doors,
windows and clerestory windows using 4 mm
thick float glass panes including ISI marked M.S.
size with necessary screws.
a) Second class teak wood
Metre
3113.00
Metre
2801.00
wood.
Metre
2037.00
Metre
1874.00
c) Kiln seasoned selected planks of sheesham
wood.
Metre
2902.00
Metre
2618.00
209 Providing and fixing factory made laminated
veneer lumber glazed shutter conforming to IS:
14616 and TADS 15:2001 (Part B) , using 4mm
thick float glass panes for doors, windows and
clerestory windows including ISI marked M.S.
size with necessary screws, all as per directions
of Engineer-in-charge.
a) 30 mm thick shutters 1.00 Sqm 2196.15 One Square
Metre
2196.00
210 Extra for providing heavy sheet float glass
panes instead of ordinary float glass in glazed
doors, windows and clerestory window
shutters. (Area of opening for glass panes
excluding portion inside rebate shall be
measured)
a) 5.5 mm thick instead of 4 mm thick. 1.00 Sqm 197.45 One Square
Metre
197.00
211 Extra for providing frosted glass panes 4 mm
thick instead of ordinary float glass panes 4 mm
thick in doors, windows and clerestory window
shutters.(Area of opening for glass panes
excluding portion inside rebate shall be
measured).
Metre
6.00
212 Deduct for providing pin headed glass panes
instead of ordinary float glass panes weighing 4
mm thick in doors, windows and clerestory
windows shutters (Area of opening for glass
panes excluding portion inside rebate shall be
measured).
1.00 Sqm -34.85 One Square
Metre
-35.00
213 Extra for providing ISI marked Stainless Steel
butt hinges instead of M.S. pressed butt hinges
bright finished of required size with necessary
screws.(Shutter area to be measured).
Metre
100.00
214 Deduct for not providing hinges in doors,
windows or clerestory window shutters with :
a) Stainless steel butt hinges with stainless steel
screws :
(i) For 2nd class teak wood and other class of
wood shutters.
Metre
-147.00
b) ISI marked M.S. pressed butt hinges bright
finished of required size
(i) For 2nd class teak wood and other class of
wood shutters.
Metre
-47.00
215 Providing and fixing 25 mm thick shutters for
cup board etc. :
a) Panelled or panelled & glazed shutters :
(i) Second class teak wood including ISI marked
anodised aluminium butt hinges with necessary
screws.
Metre
2617.00
(ii) Second class teak wood including ISI marked
nickel plated bright finished M.S. piano hinges
with necessary screws.
Metre
2648.00
b) Glazed shutters :
(i) Second class teak wood including ISI marked
anodized aluminium butt hinges with necessary
screws.
Metre
2615.00
(ii) Second class teak wood including ISI marked
Metre
2588.00
216 Providing and fixing flat pressed 3 layer particle
board medium density exterior grade (Grade I)
or graded wood particle board IS : 3087
marked, to frame, backing or studding with
screws etc. complete (Frames, backing or
studding to be paid separately) :
Metre
511.00
Metre
629.00
217 Providing and fixing Pre-laminated flat pressed
3 layer (medium density) particle board or
graded wood particle board IS : 3087 marked,
with one side decorative and other side
balancing lamination Grade I, Type II exterior
grade IS : 12823 marked, in shelves with screws
and fittings wherever required, edges to be
painted with polyurethane primer (fittings to be
paid separately).
Metre
1177.00
Metre
1277.00
218 Providing and fixing ISI marked flush door
shutters conforming to IS: 2202 (Part I)
decorative type, core of block board
construction with frame of 1stclass hard wood
and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers
on both faces of shutters.
a) 35 mm thick including ISI marked Stainless Steel
butt hinges with necessary screws.
Metre
2324.00
b) 30 mm thick including ISI marked Stainless Steel
Metre
2149.00
c) 25 mm thick (for cupboard) including ISI marked
nickel plated bright finished M.S. Piano hinges
IS : 3818 marked with necessary screws.
Metre
1964.00
219 Providing and fixing ISI marked flush door
shutters conforming to IS: 2202 (Part I) non-
decorative type, core of block board
construction with frame of 1stclass hard wood
and well matched commercial 3 ply veneering
with vertical grains or cross bands and face
veneers on both faces of shutters :
a) 35 mm thick including ISI marked Stainless Steel
Metre
1685.00
b) 30 mm thick including ISI marked Stainless Steel
Metre
1511.00
c) 25mm thick (for cupboard) including ISI marked
Metre
1384.00
220 Extra for Providing and fixing flush doors with
decorative veneering instead of non decorative
ISI marked flush door shutters conforming to IS:
2202 (Part I)
a) On one side only. 1.00 Sqm 394.90 One Square
Metre
395.00
221 Extra for providing lipping with 2nd class teak
wood battens 25 mm minimum depth on all
edges of flush door shutters (over all area of
door shutter to be measured).
Metre
348.00
222 Extra for providing vision panel not exceeding
0.1 sqm in all type of flush doors (cost of glass
excluded) (overall area of door shutter to be
measured) :
a) Rectangular or square. 1.00 Sqm 133.55 One Square
Metre
134.00
b) Circular. 1.00 Sqm 209.05 One Square
Metre
209.00
223 Extra if louvers (not exceeding 0.2 sqm) are
provided in flush door shutters (overall area of
door shutters to be measured).
a) Decorative type door. 1.00 Sqm 360.05 One Square
Metre
360.00
224 Extra for cutting rebate in flush door shutters
(Total area of the shutter to be measured).
Metre
99.00
225 Providing and fixing wire gauge shutters using
galvanized M.S. wire gauge of average width of
aperture 1.4 mm in both directions with wire of
dia 0.63 mm, for doors, windows and clerestory
windows with hinges and necessary screws:
a) 35 mm thick shutters.
(i) with ISI marked M.S. pressed butt hinges bright
finished of required size. -Second class teak
wood
Metre
2914.00
(ii) with ISI marked M.S. pressed butt hinges bright
finished of required size -Kiln seasoned and
chemically treated hollock wood.
Metre
1961.00
(iii) with ISI marked M.S. pressed butt hinges bright
finished of required size - Kiln seasoned
selected class of sheesham wood.
Metre
2727.00
(iv) With ISI marked stainless steel butt hinges of
required size - Second class teak wood.
Metre
3014.00
(v) With ISI marked stainless steel butt hinges of
required size - Kiln seasoned and chemically
treated hollock wood.
Metre
2062.00
(vi) With ISI marked stainless steel butt hinges of
required size - Kiln seasoned selected class of
sheesham wood.
Metre
2827.00
b) 30 mm thick shutters.
finished of required size - Second class teak
wood.
Metre
2575.00
finished of required size - Kiln seasoned and
Metre
1761.00
Metre
2415.00
required size - Second class teak wood.
Metre
2676.00
Metre
1861.00
sheesham wood.
Metre
2516.00
226 Providing and fixing wire gauge laminated
veneer lumber shutters conforming to IS :
14616, and as per TADS 15 :2001 (Part B) using
galvanised wire gauge with average width of
dia 0.63mm as per IS :1568 for doors, windows
and clerestory windows including ISI marked
M.S. pressed butt hinges bright finished of
required size with necessary screws as per
directions of Engineer-in-charge:
a) 35 mm thick shutters 1.00 Sqm 2172.90 One Square
Metre
2173.00
b) 30 mm thick shutters 1.00 Sqm 1963.85 One Square
Metre
1964.00
227 Providing 50x50x50mm 2nd class teak wood
plugs including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand) and
making good the walls etc.
1.00 No. 19.70 Each 20.00
228 Providing and fixing expandable fasteners of
specified size with necessary plastic sleeves and
galvanised M.S. screws including drilling holes
in masonry work /CC/ R.C.C. and making good
etc. complete.
a) 25 mm long 1.00 No. 15.70 Each 16.00
b) 32 mm long 1.00 No. 17.90 Each 18.00
c) 40 mm long 1.00 No. 21.40 Each 21.00
d) 50 mm long 1.00 No. 22.55 Each 23.00
229 Providing and fixing 2nd class teak wood plain
lining tongued and grooved , including wooden
plugs complete with necessary screws and
priming coat on unexposed surface.
a) 40 mm thick. 1.00 Sqm 4730.65 One Square
Metre
4731.00
b) 25 mm thick. 1.00 Sqm 3070.55 One Square
Metre
3071.00
Metre
2483.00
d) 12 mm thick 1.00 Sqm 1597.90 One Square
Metre
1598.00
230 Providing and fixing in wall lining flat pressed
three layer (medium density) particle board or
graded wood Pre-laminated one side decorative
lamination on other side balancing lamination
Grade I, Type II, IS : 12823 marked, including
priming coat on unexposed surface, with
necessary fixing arrangement and screws etc.
complete :
Metre
1151.00
Metre
1292.00
Metre
1394.00
231 Providing and fixing specified wood frame work
consisting of battens 50x25 mm fixed with rawl
plug and drilling necessary holes for rawl plug
etc. including priming coat complete.
a) Kiln seasoned and chemically treated hollock
wood.
Metre
91975.00
232 Providing and fixing plywood 4 mm thick one
side decorative veneer conforming to IS: 1328
(type-1) for plain lining / cladding with
necessary screws, including priming coat on
unexposed surface with:
a) Decorative veneer facings of approved
manufacture.
Metre
1096.00
233 Providing and fixing 4mm thick coir veneer
board, ISI marked IS : 14842, plain lining with
necessary screws, priming coat on unexposed
surface etc., complete.
Metre
915.00
234 Providing and fixing skirting with Pre-laminated
(one side decorative and other side balancing
lamination) flat pressed 3 layer or graded
particle board (medium density) Grade I, Type
II, IS :12823 marked, with necessary fixing
arrangements and screws, including drilling
necessary holes for rawl plugs etc. and priming
coat on unexposed surface complete :
Metre
1481.00
Metre
1583.00
235 Providing and fixing wooden moulded beading
to door and window frames with iron screws,
plugs and priming coat on unexposed surface
etc. complete :
a) 2nd class teak wood
(i) 50x12 mm 1.00 m 110.50 One Running
Metre
111.00
(ii) 50 x 20 mm 1.00 m 148.10 One Running
Metre
148.00
wood.
(i) 50x12 mm 1.00 m 83.30 One Running
Metre
83.00
(ii) 50x20 mm 1.00 m 102.75 One Running
Metre
103.00
236 Providing and fixing plain jaffri of 35x10 mm
laths placed 35 mm apart (frames to be paid
separately) including fixing 50x12 mm beading
complete with :
a) Second class teak wood. 1.00 Sqm 1702.60 One Square
Metre
1703.00
237 Providing and fixing 18 mm thick, 150 mm wide
pelmet of flat pressed 3 layer or graded wood
particle board medium density grade I, IS : 3087
marked, including top cover of 6 mm
commercial ply wood conforming to IS: 303
BWR grade, nickel plated M.S. pipe 20 mm dia (
heavy type ) curtain rod with nickel plated
brackets, including fixing with 25x3 mm M.S.
flat 10 cm long fixed to pelmet with hollock
wood cleats of size 100 mm x 40 mm x 40 mm
on both inner side of pelmet and rawl plugs 75
mm long etc. all complete.
Metre
333.00
238 Providing and fixing 18 mm thick, 150 mm wide
pelmet of coir veneer board ISI marked IS :
14842, including top cover of 6 mm coir veneer
board, nickel plated M.S. Pipe 20 mm dia.
(heavy type) curtain rod with nickel plated
brackets, including fixing with 25x3 mm M.S.
Flat 10 cm long fixed to pelmet with hollock
wood cleats of size 100 mm x 40 mm x 40 mm
on both inner side of pelmet and rawl plugs 75
mm long etc. all complete
Metre
451.00
239 Extra for using veneered particle board
conforming to IS 3097 Grade I, in item of
pelmet 18mm thick 150mm wide.
a) Non decorative veneer on both sides. 1.00 m 31.60 One Running
Metre
32.00
b) Particle board with decorative veneering on
both sides.
Metre
93.00
240 Providing and fixing teak wood lipping of size
25x3 mm in pelmet.
Metre
45.00
241 Providing and fixing curtain rods of 1.25 mm
thick chromium plated brass plate, with two
chromium plated brass brackets fixed with C.P.
brass screws and wooden plugs, etc., wherever
necessary complete :
a) 12 mm dia. 1.00 m 258.25 One Running
Metre
258.00
b) 20 mm dia. 1.00 m 339.55 One Running
Metre
340.00
c) 25 mm dia. 1.00 m 444.10 One Running
Metre
444.00
242 Providing and fixing nickel plated M.S. pipe
curtain rods with nickel plated brackets :
a) 20 mm dia (heavy type) 1.00 m 113.25 One Running
Metre
113.00
b) 25 mm dia (heavy type) 1.00 m 126.00 One Running
Metre
126.00
243 Providing and fixing M.S. grills of required
pattern in frames of windows etc. with M.S.
flats, square or round bars etc. including
priming coat with approved steel primer all
complete.
a) Fixed to steel windows by welding. 1.00 Kg 103.15 One Kilogram 103.00
b) Fixed to openings /wooden frames with rawl
plugs screws etc.
1.00 Kg 110.95 One Kilogram 111.00
244 Providing and fixing expanded metal 20x60 mm
strands 3.25 mm wide and 1.6 mm thick for
windows etc. including 62 x19 mm beading of II
nd class teakwood and priming coat with
approved steel primer all complete.
Metre
906.00
245 Providing and fixing hard drawn steel wire
fabric 75x25 mm mesh of weight not less than
7.75 Kg per sqm to window frames etc.
including 62x19 mm beading of second class
teak wood and priming coat with approved
steel primer all complete.
Metre
1075.00
246 Providing and fixing fly proof galvanized M.S.
wire gauge to windows and clerestory windows
using wire gauge with average width of
dia. 0.63 mm all complete.
a) With 2nd class teak wood beading 62X19 mm. 1.00 Sqm 820.80 One Square
Metre
821.00
b) With 12 mm mild steel U beading. 1.00 Sqm 548.75 One Square
Metre
549.00
247 Deduct for fixing 75x25 mm hard drawn steel
wire fabric of weight not less than 7.75 Kg. per
sqm in panelled and glazed door and window
shutter instead of glass sheet 4 mm thick.
Metre
-116.00
248 Providing 40x5 mm flat iron hold fast 40 cm
long including fixing to frame with 10 mm
diameter bolts, nuts and wooden plugs and
embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse
size)
1.00 No. 110.20 Each 110.00
249 Providing beams including hoisting, fixing in
position and applying wood preservative for the
unexposed surfaces, etc. complete with :
a) Sal wood. 1.00 Cum 67307.30 One Cubic
Metre
67307.00
b) Hollock wood. 1.00 Cum 44200.60 One Cubic
Metre
44201.00
250 Providing and fixing ISI marked M.S. pressed
butt hinges bright finished with necessary
screws etc. complete :
a) 125x65x2.12 mm 1.00 No. 31.80 Each 32.00
b) 100x58x1.90 mm 1.00 No. 24.05 Each 24.00
c) 75x47x1.70 mm 1.00 No. 19.10 Each 19.00
d) 50x37x1.50 mm 1.00 No. 10.75 Each 11.00
251 Providing and fixing ISI marked, IS : 1341, M.S.
heavy weight butt hinges with necessary screws
etc. complete :
a) 125x90x4.00 mm 1.00 No. 53.90 Each 54.00
b) 100x75x3.50 mm 1.00 No. 33.90 Each 34.00
c) 75x60x3.10 mm 1.00 No. 22.55 Each 23.00
d) 50x40x2.50 mm 1.00 No. 13.65 Each 14.00
252 Providing and fixing ISI marked oxidised M.S.
pressed butt hinges with necessary screws etc.
complete.
a) 125x65x2.12 mm 1.00 No. 32.90 Each 33.00
b) 100x58x1.90 mm 1.00 No. 25.55 Each 26.00
c) 75x47x1.70 mm 1.00 No. 20.70 Each 21.00
d) 50x37x1.50 mm 1.00 No. 11.55 Each 12.00
pressed Parliamentary hinges with necessary
a) 150x125x27x2.80 mm 1.00 No. 56.30 Each 56.00
b) 125x125x27x2.80 mm 1.00 No. 53.40 Each 53.00
c) 100x125x27x2.80 mm 1.00 No. 44.10 Each 44.00
d) 75x100x20x2.24 mm 1.00 No. 38.30 Each 38.00
single acting spring hinges with necessary
a) 150 mm 1.00 No. 164.75 Each 165.00
b) 125 mm 1.00 No. 158.95 Each 159.00
c) 100 mm 1.00 No. 134.30 Each 134.00
255 Providing and fixing oxidised M.S. double acting
spring hinges with necessary screws etc.
complete.
a) 150 mm 1.00 No. 164.75 Each 165.00
b) 125 mm 1.00 No. 158.95 Each 159.00
c) 100 mm 1.00 No. 134.30 Each 134.00
256 Providing M.S. Piano hinges ISI marked IS : 3818
finished with nickel plating and fixing with
necessary screws etc., complete.
a) Overall width 35 mm. 1.00 m 157.80 One Running
Metre
158.00
b) Overall width 50 mm. 1.00 m 154.30 One Running
Metre
154.00
c) Overall width 65 mm. 1.00 m 168.25 One Running
Metre
168.00
sliding door bolts with nuts and screws etc.
complete :
a) 300x16 mm 1.00 No. 161.55 Each 162.00
b) 250x16 mm 1.00 No. 154.60 Each 155.00
tower bolt black finish, (Barrel type) with
necessary screws etc. complete :
a) 250x10 mm 1.00 No. 63.55 Each 64.00
b) 200x10 mm 1.00 No. 56.30 Each 56.00
c) 150x10 mm 1.00 No. 43.40 Each 43.00
d) 100x10 mm 1.00 No. 36.75 Each 37.00
259 Providing and fixing ISI marked 85x42mm
oxidised M.S. pull bolt lock conforming to IS :
7534 with necessary screws bolts, nut and
washers etc. complete.
1.00 No. 69.80 Each 70.00
door latches conforming to IS:5930 with screws
etc. complete :
a) 300x20x6 mm 1.00 No. 66.20 Each 66.00
b) 250x20x6 mm 1.00 No. 56.90 Each 57.00
handles conforming to IS:4992 with necessary
a) 125 mm 1.00 No. 27.20 Each 27.00
b) 100 mm 1.00 No. 23.55 Each 24.00
c) 75 mm 1.00 No. 22.40 Each 22.00
262 Providing and fixing oxidised M.S. hasp and
staple (safety type) conforming to IS : 363 with
a) 150 mm 1.00 No. 22.40 Each 22.00
b) 115 mm 1.00 No. 19.00 Each 19.00
c) 90 mm 1.00 No. 16.10 Each 16.00
263 Providing and fixing oxidised M.S. casement
stays (straight peg type) with necessary screws
etc. complete.
a) 300 mm weighing not less than 200 gms. 1.00 No. 32.50 Each 33.00
b) 250 mm weighing not less than 150 gms. 1.00 No. 29.70 Each 30.00
c) 200 mm weighing not less than 120 gms. 1.00 No. 27.35 Each 27.00
264 Providing and fixing oxidised M.S. Safety chain
with necessary fixtures for doors. (Weighting
not less than 450 gms.)
1.00 No. 77.20 Each 77.00
265 Providing and fixing IS : 12817 marked stainless
steel butt hinges with stainless steel screws etc.
complete :
a) 125x64x1.90 mm 1.00 No. 61.80 Each 62.00
b) 100X58X1.90 mm 1.00 No. 54.80 Each 55.00
c) 75x47x1.80 mm 1.00 No. 37.20 Each 37.00
d) 50x37x1.50 mm 1.00 No. 23.30 Each 23.00
266 Providing and fixing IS : 12817 marked stainless
steel butt hinges (heavy weight) with stainless
steel screws etc. complete :
a) 125x64x2.50 mm 1.00 No. 71.05 Each 71.00
b) 100x60x2.50 mm 1.00 No. 55.95 Each 56.00
c) 75x50x2.50 mm 1.00 No. 42.45 Each 42.00
267 Providing and fixing bright finished brass butt
hinges with necessary screws etc. complete :
a) 125x85x5.5 mm (heavy type) 1.00 No. 395.00 Each 395.00
b) 125x70x4 mm (ordinary type) 1.00 No. 133.70 Each 134.00
c) 100x85x5.5 mm (heavy type) 1.00 No. 345.60 Each 346.00
d) 100x70x4 mm (ordinary type) 1.00 No. 107.50 Each 108.00
e) 75x65x4 mm (heavy type) 1.00 No. 130.15 Each 130.00
f) 75x40x2.5 mm (ordinary type) 1.00 No. 69.75 Each 70.00
g) 50x40x2.5 mm (ordinary type) 1.00 No. 29.10 Each 29.00
268 Providing and fixing bright finished brass
parliamentary hinges with necessary screws etc.
complete :
a) 150x125x27x5 mm 1.00 No. 358.60 Each 359.00
b) 125x125x27x5 mm 1.00 No. 317.95 Each 318.00
c) 100x125x27x5 mm 1.00 No. 294.70 Each 295.00
d) 75x100x20x3.2 mm 1.00 No. 224.45 Each 224.00
269 Providing and fixing bright finished brass tower
bolts (barrel type) with necessary screws etc.
complete :
a) 250x10 mm 1.00 No. 288.30 Each 288.00
b) 200x10 mm 1.00 No. 226.70 Each 227.00
c) 150x10 mm 1.00 No. 186.05 Each 186.00
d) 100x10 mm 1.00 No. 124.85 Each 125.00
270 Providing and fixing bright finished brass door
latch with necessary screws etc. complete :
a) 300x16x5 mm 1.00 No. 207.80 Each 208.00
b) 250x16x5 mm 1.00 No. 201.95 Each 202.00
271 Providing and fixing bright finished brass 100
mm mortise latch and lock with 6 levers and a
pair of lever handles of approved quality with
necessary screws etc. complete.
1.00 No. 514.55 Each 515.00
mm mortise latch with one dead bolt and a pair
of lever handles of approved quality with
1.00 No. 456.45 Each 456.00
273 Providing and fixing bright finished brass night
latch of approved quality with necessary screws
etc. complete.
1.00 No. 659.75 Each 660.00
274 Providing and fixing special quality bright
finished brass cupboard or ward robe locks with
four levers of approved quality with necessary
screws etc. complete.
a) 40 mm 1.00 No. 166.10 Each 166.00
b) 50 mm 1.00 No. 171.90 Each 172.00
c) 65 mm 1.00 No. 177.70 Each 178.00
d) 75 mm 1.00 No. 200.95 Each 201.00
275 Providing and fixing 50 mmbright finished brass
cup board or wardrobe knob of approved
quality with necessary screws etc. complete.
1.00 No. 47.60 Each 48.00
handles with screws etc. complete :
a) 125 mm 1.00 No. 170.30 Each 170.00
b) 100 mm 1.00 No. 158.35 Each 158.00
c) 75 mm 1.00 No. 123.50 Each 124.00
hanging type floor door stopper with necessary
screws, etc. complete.
1.00 No. 79.60 Each 80.00
278 Providing and fixing aluminium die cast body
tubular type universal hydraulic door closer
(having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door
width upto 700 mm) with necessary accessories
and screws etc. complete.
1.00 No. 737.35 Each 737.00
279 Providing and fixing aluminium extruded
section body tubular type universal hydraulic
door closer (having brand logo with ISI, IS :
3564, embossed on the body, door weight upto
36 kg to 80 kg and door width from 701 mm to
1000mm) with double speed adjustment with
necessary accessories and screws etc.
complete.
1.00 No. 1027.20 Each 1027.00
casement window fastener with necessary
1.00 No. 67.25 Each 67.00
casement stays (straight peg type) with
a) 300 mm weighing not less than 330 gms 1.00 No. 167.80 Each 168.00
b) 250 mm weighing not less than 280 gms 1.00 No. 136.90 Each 137.00
c) 200 mm weighing not less than 240 gms 1.00 No. 125.30 Each 125.00
282 Providing and fixing bright finished brass hasp
and staple (safety type) with necessary screws
etc. complete:
a) 150 mm 1.00 No. 102.85 Each 103.00
b) 115 mm 1.00 No. 86.85 Each 87.00
c) 90 mm 1.00 No. 76.35 Each 76.00
283 Providing and fixing chromium plated brass 100
mm mortice latch and lock with 6 levers and a
pair of lever handles of approved quality with
1.00 No. 712.00 Each 712.00
284 Providing and fixing chromium plated brass
night latch of approved quality with necessary
1.00 No. 700.40 Each 700.00
285 Providing and fixing special quality chromium
plated brass cupboard locks with six levers of
approved quality with necessary screws etc.
complete.
a) Size 40 mm 1.00 No. 160.30 Each 160.00
b) Size 50 mm 1.00 No. 171.90 Each 172.00
c) Size 65 mm 1.00 No. 183.50 Each 184.00
d) Size 75 mm 1.00 No. 212.55 Each 213.00
286 Providing and fixing chromium plated brass 50
mm cupboard or wardrobe knobs with nuts
complete.
1.00 No. 62.70 Each 63.00
handles with necessary screws etc. complete:
a) 125 mm 1.00 No. 210.95 Each 211.00
b) 100 mm 1.00 No. 181.55 Each 182.00
c) 75 mm 1.00 No. 158.35 Each 158.00
casement window fastener with necessary
1.00 No. 120.65 Each 121.00
casement stays (straight peg type) with
a) 300 mm weighing not less than 330 gms 1.00 No. 184.55 Each 185.00
b) 250 mm weighing not less than 280 gms 1.00 No. 161.30 Each 161.00
c) 200 mm weighing not less than 240 gms 1.00 No. 143.90 Each 144.00
290 Providing and fixing ISI marked aluminium butt
hinges anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or
dyed to required colour or shade with
necessary screws etc. complete:
a) 125x75x4 mm 1.00 No. 104.30 Each 104.00
b) 125x63x4 mm 1.00 No. 99.65 Each 100.00
c) 100x75x4 mm 1.00 No. 89.00 Each 89.00
d) 100x63x4 mm 1.00 No. 87.85 Each 88.00
e) 100x63x3.2 mm 1.00 No. 86.70 Each 87.00
f) 75x63x4 mm 1.00 No. 78.75 Each 79.00
g) 75x63x3.2 mm 1.00 No. 75.25 Each 75.00
h) 75x45x3.2 mm 1.00 No. 65.95 Each 66.00
291 Providing and fixing aluminium sliding door
bolts ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade
with nuts and screws etc. complete :
a) 300x16 mm 1.00 No. 215.30 Each 215.00
b) 250x16 mm 1.00 No. 180.45 Each 180.00
292 Providing and fixing aluminium tower bolts ISI
marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868 ) transparent or
a) 300x10 mm 1.00 No. 108.10 Each 108.00
b) 250x10 mm 1.00 No. 90.65 Each 91.00
c) 200x10 mm 1.00 No. 76.40 Each 76.00
d) 150x10 mm 1.00 No. 62.75 Each 63.00
e) 100x10 mm 1.00 No. 49.85 Each 50.00
293 Providing and fixing aluminium pull bolt lock, ISI
marked, anodised(anodic coating not less than
dyed to required colour and shade with
necessary screws bolts, nut and washers etc.
complete.
1.00 No. 69.80 Each 70.00
294 Providing and fixing 50cm long aluminium
kicking plate 100x3.15 mm anodised (anodic
coating not less than grade AC 10 as per IS
:1868) transparent or dyed to required colour
or shade with necessary screws etc. complete.
1.00 No. 162.55 Each 163.00
295 Providing and fixing aluminium handles ISI
marked anodised (anodic coating not less than
a) 125 mm 1.00 No. 66.95 Each 67.00
b) 100 mm 1.00 No. 52.80 Each 53.00
c) 75 mm 1.00 No. 44.90 Each 45.00
296 Providing and fixing aluminium hanging floor
door stopper ISI marked anodised (anodic
coating not less than grade AC 10 as per IS :
1868)transparent or dyed to required colour
and shade with necessary screws etc. complete.
a) Single rubber stopper 1.00 No. 33.75 Each 34.00
b) Twin rubber stopper 1.00 No. 80.20 Each 80.00
297 Providing and fixing aluminium casement stays
ISI marked anodised (anodic coating not less
than grade AC 10 as per IS : 1868) transparent
or dyed to required colour and shade with
1.00 No. 68.40 Each 68.00
mm mortice latch and lock ISI marked with six
levers and a pair of anodised (anodic coating
not less than grade AC 10 as per IS : 1868)
aluminium lever handles of approved quality
with necessary screws etc., complete.
1.00 No. 754.45 Each 754.00
299 Providing and fixing aluminium tee channels
(heavy duty) with rollers, stop end in pelmets as
curtain rod.
Metre
62.00
300 Providing and fixing partition upto ceiling height
consisting of G.I. frame and required board,
including providing and fixing of frame work
made of special section power pressed/ roll
form G.I. sheet with zinc coating of
120gms/sqm(both side inclusive), consisting of
floor and ceiling channel 50mm wide having
equal flanges of 32 mm and 0.50 mm thick,
fixed to the floor and ceiling at the spacing of
610 mm centre to centre with dash fastener of
12.5mm dia meter 50 mm length or suitable
anchor fastener or metal screws with nylon
plugs and the studs 48 mm wide having one
flange of 34 mm and other flange 36 mm and
0.50 mm thick fixed vertically within flanges of
floor and ceiling channel and placed at a
spacing of 610mm centre to centre by 6 mm dia
bolts and nuts, including fixing of studs along
both ends of partition fixed flush to wall with
suitable anchor fastener or metal screws with
nylon plugs at spacing of 450 mm centre to
centre, and fixing of boards to both side of
framework by 25 mm long dry wall screws on
studs, floor and ceiling channels at the spacing
of 300 mm centre to centre.
The boards are to be fixed to the framework
with joints staggered to avoid through cracks,
M.S. fixing channel of 99mm width (0.9 mm
thick having two flanges of 9.5 mm each) to be
provided at the horizontal joints of two boards,
fixed to the studs using metal to metal flathead
screws, including jointing and finishing to a
flush finish with recommended jointing
compound, jointing tape, angle beads at corner
(25mm x 25 mm x 0.5 mm), joint finisher and
two coats of primer suitable for board as per
manufacture's specification and direction of
engineer in charge all complete.
a) 75 mm overall thickness partition with 12.5 mm
thick double skin fire rated board conforming to
IS: 2095: part I.
Metre
1253.00
b) 75mm overall thickness partition with 12.5 mm
thick double skin tapered edged plain Gypsum
board conforming to IS: 2095: part I
Metre
1091.00
c) 66mm overall thickness Partition with 8mm
thick double skin Calcium Silicate Board made
with Calcareous & Siliceous materials
reinforced with cellulose fiber manufactured
through autoclaving process with Compressive
Strength 225 kg/sq.cm. Bending Strength 100
kg./sq.cm
Metre
1551.00
d) 66mm overall thickness partition using 8mm
thick double skin non- asbestos multipurpose
cement board reinforced with cellulose fibre
manufactured through autoclaving process
(High pressure steam cured) as per IS: 14862
with suitable fibre cement screw.
Metre
1277.00
301 Providing and fixing PTMT handles with
a) 125x34x24 mm weighing not less than 23 gms. 1.00 No. 39.55 Each 40.00
b) 150x34x24 mm weighing not less than 26 gms. 1.00 No. 44.15 Each 44.00
302 Providing and fixing PTMT Butt hinges with
a) 75x60x10 mm fitted with 5.5 mm dia M.S.
Bright Bar Rod weighing not less than 34 gms.
1.00 No. 60.90 Each 61.00
b) 100x75x10 mm fitted with 5.5 mm dia MS
Bright Bar Rod weighing not less than 53 gms.
1.00 No. 79.20 Each 79.00
303 Providing and fixing PTMT Tower Bolts with 12
mm one piece rod inside and necessary screws
etc., complete.
a) 152x42x18 mm weighing not less than 60 gms. 1.00 No. 82.20 Each 82.00
b) 202x42x18 mm weighing not less than 78 gms. 1.00 No. 101.35 Each 101.00
304 Providing and fixing PTMT door catcher of
length 72 mm and dia. of 42 mm with suitable
washers weighing not less than 33 gms.
1.00 No. 34.10 Each 34.00
305 Providing and fixing Bamboo jaffery/ fencing
consisting of superior quality 25mm dia
(Average) half cut bamboo placed vertically and
fixed together with three numbers horizontal
running members of hollock wood in scantling
of section 50X25mm fixed with nails and G.I
wire on existing support complete as per
direction of Engineer-in-charge.
Metre
382.00
306 Providing and fixing wooden moulded corner
beading of triangular shape to the junction of
panelling etc. with iron screws, plugs and
priming coat on unexposed surface etc.
complete 2nd class teak wood.
a) 50x50mm (base and height). 1.00 m 188.30 One Running
Metre
188.00
307 Providing and fixing 2nd class teak wood
lipping/ moulded beading or taj beading of size
18X5mm fixed with wooden adhesive of
approved quality and screws/ nails on the edges
of the Pre-laminated particle board as per
Metre
54.00
308 Providing and fixing bright finished 100mm
mortice lock with 6 levers without pair of
handles for aluminium door with necessary
screws etc complete as per direction of
Engineer-in-charge.
1.00 No. 447.80 Each 448.00
309 Providing and fixing magnetic catcher in
cupboard / ward robe shutters including fixing
with necessary screws etc. complete :
a) Triple strip vertical type. 1.00 No. 28.35 Each 28.00
b) Double strip (horizontal type). 1.00 No. 22.55 Each 23.00
310 Providing and fixing powder coated telescopic
drawer channels 300mm long with necessary
screws etc. complete as per directions of
Engineer-in-charge.
1.00 sets 186.20 One set 186.00
311 Providing and fixing sliding arrangement in
racks/ cupboards/cabinets shutter by P/F
stainless steel rollers to run inside C or E
aluminium channel section(The payment of C or
E channel shall be made separately)
1.00 No. 11.35 Each 11.00
312 Providing and fixing factory made UPVC door
frame made of UPVC extruded sections having
an overall dimension as below (tolerance
1mm), with wall thickness 2.0 mm ( 0.2mm),
corners of the door frame to be Jointed with
galvanized brackets and stainless steel screws,
joints mitred and Plastic welded. The hinge side
vertical of the frames reinforced by galvanized
M.S. tube of size 19 X 19mm and 1mm ( 0.1
mm) wall thickness and 3 nos. stainless steel
hinges fixed to the frame complete as per
Engineer-in-charge
a) Extruded section profile size 48x40 mm. 1.00 m 199.55 One Running
Metre
200.00
b) Extruded section profile size 42x50 mm. 1.00 m 187.95 One Running
Metre
188.00
313 Providing and fixing to existing door frames.
a) 30 mm thick factory made Polyvinyl Chloride
(PVC) door shutter made of styles and rails of a
UPVC hollow section of size 60x30 mm and wall
thickness 2 mm ( 0.2 mm), with inbuilt
decorative moulding edging on one side. The
styles and rails mitred and joint at the corners
by means of M.S. galvanised/plastic brackets of
size 75x220 mm having wall thickness 1.0 mm
and stainless steel screws. The styles of the
shutter reinforced by inserting galvanised M.S.
tube of size25x20 mm and 1 mm ( 0.1 mm)
wall thickness. The lock rail made up of 'H'
section, a UPVC hollow section of size
100x30mm and 2 mm ( 0.2 mm) wall thickness
fixed to the shutter styles by means of plastic/
galvanised M.S. 'U' cleats.
The shutter frame filled with a UPVC multi-
chambered single panel of size not less than
620 mm, having over all thickness of 20mm and
1 mm ( 0.1 mm) wall thickness . The panels
filled vertically and tie bar at two places by
inserting horizontally 6mm galvanised M.S. rod
and fastened with nuts and washers, complete
as per manufacturer's specification and
Metre
2762.00
b) 25mm thick PVC flush door shutters made out
of a one piece Multi chamber extruded PVC
section of the size of 762mm X25mm or less as
per requirement with an average wall thickness
of 1mm ( 0.3mm). PVC foam end cap of
size23x10mm are provided on both vertical
edges to ensure the overall thickness of 25mm.
M.S. tube having dimensions 19mm x 19mm
and 1.0 mm ( 0.1mm) is inserted along the
hinge side of the door. Core of the door shutter
should be filled with High Density Polyurethane
foam. The Top & Bottom edges of the shutter
are covered with an end-cap of the size 25MM
X11MM. Door shutter shall be reinforced with
special polymeric reinforcements as per
manufactures' specification and direction of
Engineer-in-charge to take up necessary
hardware and fixtures. Stickers indicating the
locations of hardware will be pasted at
appropriate places,
Metre
2646.00
314 Providing and fixing factory made P.V.C. door
frame of size 50x47mm with a wall thickness of
5mm, made out of extruded 5mm rigid PVC
foam sheet, mitred at corners and joined with 2
Nos. of 150mm long brackets of 15x15mmM.S.
square tube, the vertical door frame profiles to
be reinforced with19x19mm M.S. square tube
of 19 gauge, EPDM rubber gasket weather seal
to be provided through out the frame. The door
frame to be fixed to the wall using M.S. screws
of 65/100mm size, complete as per
Engineer-in-Charge.
Metre
433.00
315 Providing and fixing factory made panel PVC
door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of
19mm x 19mm for styles and 15x15mm for top
& bottom rails. M.S. frame shall have a coat of
steel primers of approved make and
manufacture . M.S. frame covered with5mm
thick heat moulded PVC 'C' channel of size
30mm thickness, 70mmwidth out of which
50mm shall be flat and 20mm shall be tapered
in 45degreeangle on both side forming styles;
and 5mm thick, 95mm wide PVC sheet out of
which 75mm shall be flat and 20mm shall be
tapered in 45 degree on the inner side to form
top and bottom rail and 115mmwide PVC sheet
out of which 75mm shall be flat and 20mmshall
be tapered on both sides to form lock rail.
Top, bottom and lock rails shall be provided
both side of the panel.10mm (5mm x 2 ) thick,
20mm wide cross PVC sheet be provided as gap
insert for top rail & bottom rail. paneling of
5mm thick both side PVC sheet to be fitted in
the M.S. frame welded/ sealed to the styles &
rails with 7mm(5mm+2mm) thick x 15mm wide
PVC sheet beading on inner side, and joined
together with solvent cement adhesive. An
additional 5mm thick PVC strip of20mm width is
to be stuck on the interior side of the 'C'
Channel using PVC solvent adhesive etc.
complete as per direction of Engineer-in-charge.
Manufacturers specification & drawing .
a) 30 mm thick plain PVC door shutters. 1.00 Sqm 2675.15 One Square
Metre
2675.00
b) 30 mm thick pre laminated PVC door shutters. 1.00 Sqm 3139.75 One Square
Metre
3140.00
316 Providing and fixing Fiber Glass Reinforced
plastic (FRP) Door Frames of cross-section
90mm x 45mm having single rebate of 32mm x
15mm to receive shutter of 30mm thickness
.The laminate shall be moulded with fire
resistant grade unsaturated polyester resin and
chopped mat . Door frame laminate shall be
2mm thick and shall be filled with suitable
wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides.
M.S. stay shall be provided at the bottom to
steady the frame.
Metre
468.00
317 Providing and fixing to existing door frames.
a) 30 mm thick Glass Fibre Reinforced Plastic (FRP)
panelled door shutter of required colour and
approved brand and manufacture, made with
fire - retardant grade unsaturated polyester
resin, moulded to 3 mm thick FRP laminate for
forming hollow rails and styles, with wooden
frame and suitable blocks of seasoned wood
inside at required places for fixing of fittings,
cast monolithically with 5mm thick FRP
laminate for panels conforming to IS: 14856
including fixing to frames.
Metre
2327.00
b) 30mm thick Fiberglass Reinforced Plastic
(F.R.P.) flush door shutter in different plain and
wood finish made with fire retardant grade
unsaturated polyester resin, moulded to 3mm
thick FRP laminate all around, with suitable
wooden blocks inside at required places for
fixing of fittings and polyurethane foam (PUF) /
Polystyrene foam to be used as filler material
throughout the hollow panel, casted
monolithically with testing parameters of F.R.P.
laminate conforming to table - 3 of IS:14856,
Metre
2675.00
318 Providing and fixing factory made door frame
(single rebate) made out of single piece
extruded solid PVC foam profile with
homogenous fine cellular structure having
smooth outer integral skin having 62 mm width
& 32 mm thickness, frame will be mitred &
Jointed with self driven self tapping screws of
size 38 mm x 4 mm & PVC solvent cement ,
including fixing the frame to wall with suitable
dia & length anchor fastener as per
Engineer-in-charge.
Metre
363.00
319 Providing and fixing factory made 30 mm thick
door shutter made of solid PVC foam profile.
The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top
& bottom rails shall have one side wall
thickness of 15 mm integrally extruded on the
hinge side of the profile for better screw
holding power. The styles and rails shall be
reinforced with M.S. tubes of size 33 mm x 17
mm x 1 mm, painted with primer , all four
corners of reinforcement to be welded or
sealed. Solid PVC extruded bidding (push fit
type) will be set inside the styles and the rails
with a cavity, to receive single piece extruded 5
mm PVC sheet as panel.
The styles and rails will be mitred cut and joint
with the help of PVC solvent cement & self
driven self tapping screws. Single piece
extruded solid PVC lock rail of size 100 mm x 30
mm with wall thickness 5 mm & 15 mm
integrally extruded in the middle of the lock rail
& fixed with styles with the help of PVC solvent
cement & self driven self tapping screws of size
100 mm x 8 mm complete as per
manufacturer's specifications and direction of
Engineer-in-charge.
a) Non decorative finish. 1.00 Sqm 2626.40 One Square
Metre
2626.00
b) Decorative finish (both side wood grained
finish).
Metre
3256.00
320 Providing and fixing PVC rigid foam sheet 1mm
thick on existing door shutters (bathroom and
W.C. doors) using synthetic rubber based
adhesive.
Metre
739.00
321 Providing and fixing 12mm thick panelling or
panelling and glazing in panelled or panelled
and glazed shutters for doors, windows and
clerestory windows(area of opening for panel
inserts excluding portion inside grooves or
rebates to be measured). Panelling for panelled
or panelled and glazed shutters 25mm to 40mm
thick.
a) Marine plywood conforming to IS: 710 1.00 Sqm 1585.55 One Square
Metre
1586.00
b) Fire retardant plywood conforming to IS: 5509. 1.00 Sqm 1627.15 One Square
Metre
1627.00
322 Providing & Fixing decorative high pressure
laminated sheet of plain / wood grain in gloss /
matt / suede finish with high density protective
surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S,
including cost of adhesive of approved quality.
a) 1.5 mm thick. 1.00 Sqm 803.75 One Square
Metre
804.00
b) 1.0 mm thick. 1.00 Sqm 663.20 One Square
Metre
663.00
323 Providing and fixing factory made Fiberglass
Reinforced plastics (F.R.P.) chajja 4mm thick of
required colour, size and design made by Resin
Transfer Moulding (RTM) Machine Technology,
resulting in void free compact laminate in single
piece, having smooth gradual slope curvature
for easy drainage of water and duly reinforced
by 2nos. vertically and 1nos. horizontally
50x2mm thick M.S. flat with 12mm in built hole
for grouting on the existing wall along with the
50mm flanges duly inserted and sealed in the
wall complete in one single piece casted
monolithically, including all necessary fittings .
The FRP Chajja should be manufactured using
unsaturated Polyester resin as per IS:6746 duly
reinforced with fibre glass chopped strand mat
(CSM) as per IS:11551 complete with protective
Gel coat U/V coating on Top for complete
resistance from the extreme of temperature,
weather & sunlight,
Metre
4799.00
324 Providing and fixing cup board shutters 25mm
thick, with Pre-laminated flat pressed three
layer particle board or graded wood particle
board IS: 12823 marked exterior grade (Grade l
Type ll) having one side decorative lamination
and other side balancing lamination including
IInd class teak wood lipping of 25mm wide x12
mm thick with necessary screws and bright
finished stainless steel piano hinges complete
as per direction of the Engineer-in-Charge
Metre
1586.00
325 Providing and fixing cup board shutters with
25mm thick veneered particle board IS : 3097
marked exterior grade (Grade I) of approved
make including IInd class teak wood lipping of
25mm wide x 12 mm thick with necessary
screws and bright finished stainless steel piano
hinges complete as per direction of Engineer-in-
Charge.
a) With decorative veneering on one side and
commercial veneering on other side.
Metre
1353.00
b) With non decorative veneering on both sides. 1.00 Sqm 1248.70 One Square
Metre
1249.00
326 Providing and fixing factory made shutters of
Pre-laminated particle board flat pressed three
layer or graded wood particle board with one
side decorative finish and other side balancing
lamination conforming to IS: 12823 Grade l
Type ll, of approved design, and edges sealed
with water resistant paint and lipped with
aluminium 'U' type edge beading all-round the
shutter, including fixing with angle cleat, grip
strip, cadmium plated steel screws including
fixing of aluminium hinges 100x63x4 mm etc.
complete as per architectural drawing and
direction of Engineer-in-Charge (Cost of 'U'
beading and hinges will be paid for separately).
Metre
1264.00
327 Providing and fixing aluminum U beading of
required size to Pre-laminated /flush door
shutter including fixing etc. complete as per
1.00 Kg 435.10 One Kilogram 435.00
328 Providing and fixing, in position concealed G.I.
section for wall paneling using board of
required thickness fixed on the 'W' profile
(0.55mm thick ) having a knurled web of
51.55mm and two flanges of 26mm each with
lips of 10.55mm, placed @ 610mm C/C in
perimeter channel having one flange of 20mm
and another flange of 30mm with thickness of
0.55mm and web of length 27mm. Perimeter
channel is fixed on the floor and the ceiling with
the nylon sleeves @ 610mm C/C with fully
threaded self-tapping dry wall screws. Boards
fixed to the 'W' profile with 25 mmcountersunk
ribbed head screws @200mm C/C., all complete
as per the drawing & directions of engineer-in-
charge the joints of the boards are finished with
specially formulated jointing compound and
48mm wide jointing tape to provide seamless
finish.
a) Tapered edge calcium silicate board made with
calcareous & siliceous materials reinforced with
cellulose fiber manufactured through
autoclaving process to give stable crystalline
structure with compressive strength 225
kg/sq.cm, Bending strength 100kg/sq.cm.
(i) 10mm thick. 1.00 Sqm 945.70 One Square
Metre
946.00
b) Non-asbestos multipurpose cement board
reinforced with cellulose fibre manufactured
through autoclaving process (high pressure
steam cured) as per IS 14862 with suitable fibre
cement screw.
Metre
767.00
c) Gypsum board conforming to IS: 2095 Part - I .
(i) 12.5 mm thick. 1.00 Sqm 664.55 One Square
Metre
665.00
329 Providing and fixing wire gauge shutters using
stainless steel grade 304 wire gauge with wire
of dia 0.5 mm and average width of aperture
1.4 mm in both directions for doors, windows
and clerestory windows with necessary screws:
a) 35 mm thick shutters.
wood
Metre
3354.00
finished of required size - Kiln seasoned and
Metre
2401.00
Metre
3167.00
required size. - Second class teak wood.
Metre
3454.00
Metre
2501.00
sheesham wood.
Metre
3267.00
b) 30 mm thick shutters.
wood.
Metre
3015.00
finished of required size. - Kiln seasoned and
Metre
2201.00
finished of required size. - Kiln seasoned
Metre
2855.00
required size. - Second class teak wood
Metre
3116.00
Metre
2301.00
sheesham wood.
Metre
2955.00
330 Providing and fixing fly proof stainless steel
grade 304 wire gauge, to windows and
clerestory windows using wire gauge with
average width of aperture 1.4mm in both
directions with wire of dia. 0.50 mm all
complete.
a) With 2nd class teak wood beading 62X19 mm. 1.00 Sqm 1560.10 One Square
Metre
1560.00
b) With 12 mm mild steel U beading. 1.00 Sqm 1288.05 One Square
Metre
1288.00
331 Providing and fixing fire resistant door frame of
section 143 x 57 mm having built in rebate
made out of 16 SWG G.I.sheet (zinc coating not
less than 120gm/sqm) duly filled with
vermuculite based concrete mix, suitable for
mounting60 minutes fire rated door shutters.
The frame is fitted with intumuscent fire seal
strip of size 10x4 mm (minimum) alround the
frame and fixing with dash fastener of approved
size and make, including applying a coat of
approved brand fire resistant primer etc.
complete as per direction of Engineer-in-
charge(Dash fastener to be paid for separately).
Metre
1191.00
332 Providing and fixing 50 mm thick glazed fire
resistant door shutters of 60 minutes fire rating
conforming to IS:3614 (Part-II) tested and
certified as per laboratory approved by
Engineer-in-charge with suitable mounting on
doorframe, consisting of vertical styles, lock rail,
top rail 100mm wide, bottom rail200mm wide,
made out of 16 SWG G.I.sheet (zinc coating not
less than 120 gm/sqm duly filled FR insulation
material and fixing with necessary stainless
steel ball bearing hinges of approved make,
including applying a coat of approved fire
resistant primer etc. all complete as per
direction of Engineer-in charge(pannelling to be
Metre
6205.00
333 Providing and fixing glazing in fire resistant door
shutters, fixed panels, ventilators and partitions
etc., with G.I. beading of appropriate size made
out of 20 SWG G.I.sheet (zinc coating not less
than 120 gm/sqm sealant, including applying a
coat of approved fire resistant primer on G.I.
beading etc. complete all as per direction of
Engineer-in-charge.
a) With clear fire resistant glass panes 6mm thick
of approved brand, having minimum 60 minutes
fire resistance.
Metre
26955.00
334 Providing and fixing panic bar / latch (Double
point) fitted with a single body, Trim Latch &
Lock on back side of the Panic Latch of reputed
brand and manufacture to be approved by the
Engineer- in- charge, all complete.
1.00 No. 5892.30 Each 5892.00
335 Providing and fixing plain lining with necessary
screws/nuts & bolts/nails including a coat of
approved primer on one face and fixed on
wooden /steel frame work complete as per
direction of Engineer-in-charge. (Frame work
shall be paid for separately)
a) 12mm thick commercial ply conforming to IS :
1328 BWR type.
Metre
892.00
336 Providing and fixing PVC Door Frame of size
50x47mm with a wall thickness of 5 mm ( 0.2
mm) made out of single piece extruded PVC
profile, with mitred cut joints and joint with
2nos of PVC bracket of size 190 mm x 100 mm
long arms of cross section size 35 x 15mm &
self driven self taping screws, the vertical door
profiles to be reinforced with 40x20mm M.S.
rectangular tube of 0.8 mm, including providing
EPDM rubber gasket weather seal throughout
the frame, including jointing 5mm PVC frame
strip with PVC solvent cement on the back of
the profile. The door frame to be fixed to the
wall using 8x100mm long anchor fasteners
complete, all as per manufacturer's
specification and direction of Engineer -in-
charge.
Metre
597.00
337 35 mm thick factory made Solid panel PVC Door
shutter made out of single piece extruded solid
PVC profiles, 5 mm ( 0.2mm) thick, having
styles &rails (except lock rail) of size 95 mm x
35 mm x 5 mm, out of which 75 mm shall be
flat and 20 mm shall be tapered (on both side),
having one side thickness of 15 mm integrally
extruded on the hinge side of the profile for
better screw holding power, including
reinforcing with MS tube of size 40 mm X 20
mm x 1 mm, joints of styles & rails to be
mitered cut & joint with the help of PVC solvent
cement, self driven self tapping screws & M.S.
rectangular pipes bracket of size 190 mm X 100
mm of cross section size 35 mm x 17 mm x 1
mm at each corner.
Single piece extruded 5mm thick solid PVC Lock
rail of size 115 mm x 35 mm x 35 mm, out of
which 95 mm to be flat and 20 mm to be
tapered at both ends, having 15 mm solid core
in middle of rail section integrally extruded,
fixing the styles & rails with the help of solvent
and self driven self tapping screws of 125 mm x
11 mm, including providing 5 mm Single piece
solid PVC extruded sheet inserted in the door as
panel, all complete as per manufacturer's
specification and direction of Engineer-in-
charge.
a) Non decorative finish (matt finish). 1.00 Sqm 2625.40 One Square
Metre
2625.00
b) Decorative finish (wood grained finish). 1.00 Sqm 3206.15 One Square
Metre
3206.00
338 Providing and Fixing factory made uPVC door
frame made of uPVC extruded sections , of size
65 mm x 55 mm with wall thickness 2.0 mm (
0.2 mm) ,corners of the door frame to be
mitred cut and jointed with plastic brackets and
stainless steel screws, reinforcing hinge side
vertical of the frames with PVC profile of Size 28
mm x 30 mm having wall thickness 2 mm (0.2
mm),including providing & fixing 3 nos. of 125
mm long stainless steel hinges to the frame,
fixing the frame with jamb with required
number & size of anchor dash fasteners, all
complete as per manufacturer's specification
and direction of Engineer-in-charge.
Metre
409.00
PVC door shutter, styles and rails made of PVC
hollow section of size 100mm x 37mm with wall
thickness 2mm ( 0.2mm), with inbuilt bead on
one side, styles and rails mitered cut and joint
at the corners by means of 2 nos. of plastic
brackets of size 75mm x 220mm at each corner
and stainless steel screws, reinforcing the hinge
side of style by inserting PVC profile of size
28mm x 30mm, with wall thickness 2 mm(
0.2mm). Lock rail of size 100mm x 37mm, wall
thickness 2mm ( 0.2mm)will be fixed to the
vertical styles. Providing with PVC snap fit beads
and panel of size 100mm x 20 mm, and
inserting 2 nos. tie bar of 6 mm dia and
fastening with nuts and washers complete, all
as per manufacturer's specification and
Metre
2878.00
340 Providing and Fixing, factory made, PVC door
frame made of PVC extruded sections of size
75mm x 53 mm, having wall thickness 2.0mm(
0.2mm). Both verticals sides of the frame
reinforced with PVC profile of cross section
size28mm x 30mm x 2 mm thickness ( 0.2 mm)
and 75 mm x 200 mm long, including
reinforcing both ends of the top frame with PVC
profile. PVC Door Frame and PVC reinforcement
profile to be mitred cut jointed and fusion
welded together, including providing and fixing
3 nos. of 125mm long stainless steel hinges to
frame, fixing the frame with jamb with required
nos. & sizes of anchor dash fastener, all
complete as per manufacturer's specification
and direction of engineer-in-charge.
Metre
432.00
PVC Door shutter, styles and rails made of PVC
hollow extruded printed and laminated section
having overall dimension 115mm x 37mm with
wall thickness 2 mm ( 0.2mm) with inbuilt
beading on one side, the styles and rails mitred
cut and joint at corners by inserting 2 nos. PVC
profile reinforcement of size 75 mm x 200 mm
long with cross section size of 28mm x 30mm
having wall thickness 2 mm (0.2mm). Styles,
rails and reinforcements to be fusion welded
together.
Only hinge side vertical style to be reinforced
with PVC profile reinforcement in full length.
Printed and laminated PVC lock rail of size
110mm x 37mm having wall thickness 2 mm (
0.2mm) to be welded horizontally with the
vertical styles after inserting PVC profile
reinforcement as in styles and rails, providing
with PVC snap fit beading, panels of 100 x 20
mm printed & laminated and inserting 2 nos. 6
mm dia. bright steel rod horizontally with both
side threaded and tightened with check nuts
and washers complete, all as per
manufacturer's specification and direction of
engineer-in-charge.
Metre
2994.00
342 Providing and Fixing, uPVC factory made, white
colour casement/sliding window and door
made of extruded profiles. Profiles of frames
and sash will be mitered cut and fusion welded
at all corners including drilling of holes for fixing
hardware and drainage of water etc., making
arrangement for fixing of hardware, EPDM
gasket, 1.2 0.2mm thick galvanised steel
profile to be inserted in required profile, frame
will be fixed to the wall with 8 mm x 100 mm
long fasteners, all complete as per direction of
Engineer-in-charge. (Glazing, hardware hinges
and fitting etc. to be paid separately.) Note:-
Each member of window to be measured
separately with clear length.
a) Casement Window (Outward/Inward opening)
with hinge System.
(i) Frame (50 mm x 50mm) 1.00 m 402.45 One Running
Metre
402.00
(ii) Sash (Style and Rail) (62 mm x 34 mm) 1.00 m 384.15 One Running
Metre
384.00
(iii) Mullion (intermediate Section) (66mm x 50
mm)
Metre
427.00
(iv) T' Profile (one vertical length in between two
shutters) (24mm x 34.5mm)
Metre
93.00
(v) Glazing bead (12mm x 18mm) 1.00 m 123.30 One Running
Metre
123.00
b) Casement Window (With friction hinge &
outward opening)
(i) Casement Frame (67mm x 62mm) 1.00 m 457.35 One Running
Metre
457.00
(ii) Casement Window Sash/Mullion (67mm x
75mm ) (style, rail and intermediate section)
Metre
494.00
(iii) Casement Glazing bead (35mm x 18 mm) 1.00 m 166.00 One Running
Metre
166.00
c) Sliding Window (Two Track, 2/4 Shutters)
(i) Two Track Sliding Frame (67mm x 52mm) 1.00 m 540.40 One Running
Metre
540.00
(ii) Sliding window Sash (60mm x 44mm) 1.00 m 505.00 One Running
Metre
505.00
(iii) Sliding Interlock for Window (one vertical
length in each shutter)( 45.5 mm x 28 mm)
Metre
139.00
(iv) Sliding Glazing bead (35 mm x 18 mm) 1.00 m 166.00 One Running
Metre
166.00
d) Sliding Door (Two Track, 2/4 Shutters)
(i) Two Track Sliding Frame (67mm x 52mm) 1.00 m 519.80 One Running
Metre
520.00
(ii) Sliding Door Sash (80mm x 44mm) 1.00 m 640.75 One Running
Metre
641.00
(iii) Sliding Interlock for Door (one vertical length in
each shutter) (45.5 mm x 28 mm)
Metre
139.00
(iv) Sliding Glazing bead (35 mm x 18 mm) 1.00 m 166.00 One Running
Metre
166.00
343 Providing and fixing stainless steel (SS-304
grade) friction hinges to the side/ top hung
uPVC windows, of approved quality with
necessary stainless steel screws etc. as per
a) 200 x 19 x 1.9 mm 1.00 No. 279.75 Each 280.00
b) 250 x 19 x 1.9 mm 1.00 No. 349.40 Each 349.00
c) 300 x 19 x 1.9 mm 1.00 No. 442.35 Each 442.00
d) 350 x 19 x 1.9 mm 1.00 No. 500.40 Each 500.00
e) 400 x 19 x 1.9 mm 1.00 No. 628.20 Each 628.00
344 Providing and fixing casement handle made of
zinc alloyed (white powder coated) for uPVC
casement window with necessary screws etc.
complete.
1.00 No. 192.80 Each 193.00
345 Providing and fixing zinc alloyed (white powder
coated) touch lock for uPVC sliding window
with necessary screws etc. complete.
1.00 No. 134.70 Each 135.00
346 Providing and fixing steel roller for uPVC sliding
window with necessary screws etc. complete.
1.00 No. 65.00 Each 65.00
347 Providing and fixing steel roller for uPVC sliding
door with necessary screws etc. complete.
1.00 No. 105.65 Each 106.00
348 Providing and fixing steel (white power coated)
crescent lock for uPVC sliding window/ door
with necessary screws etc. complete.
1.00 No. 123.10 Each 123.00
349 Providing and fixing frame work for partitions/
wall lining etc. made of 50x50x1.6mm hollow
MS tube, placed along the walls, ceiling and
floor in a grid pattern with spacing @ 60 cm
centre to centre both ways (vertically &
horizontally ) or at required spacing near
opening, with necessary welding at junctions
and fixing the frame to wall/ ceiling/ floors with
steel dash fasteners of 8 mm dia, 75 mm long
bolt, including making provision for opening for
doors, windows, electrical conduits, switch
boards etc., including providing with two coats
of approved steel primer etc. complete, all as
per direction of Engineer-in-charge.
1.00 Kg 89.15 One Kilogram 89.00
350 Providing and fixing panelling or paneling and
glazing in panelled or panelled and glazed
shutters for doors, windows and clerestory
windows( area of opening for panel inserts
excluding portion inside grooves or rebated to
be measured). Panelling for panelled and glazed
shutters 25mm to 40mm thick: Pre-laminated
with decorative lamination on both side
exterior Grade - I MDF Board 12 mm thick
confirming to IS:14587
Metre
1387.00
351 Providing and fixing Pre -laminated medium
density fibre board exterior grade (Grade-I)
IS:14587:1998 marked, to frame, backing or
studding with screws etc. complete ( Frames,
backing or studding to be paid separately).
a) Pre-laminated with decorative lamination on
both side exterior Grade - I MDF Board 12 mm
thick confirming to IS:14587
Metre
958.00
b) Pre-laminated with decorative lamination on
both side exterior Grade - I MDF Board 18 mm
thick confirming to IS:14588
Metre
1242.00
352 Providing and fixing Pre-laminated medium
density fibre board IS:14587:1998 marked, with
one side decorative lamination other side
balancing lamination Grade-I(exterior grade) in
shelves with screws and fittings wherever
required, edges to be sealed with PVC edge
bending tape 2.00 mm thick of approved brand
(fittings to be paid separately).
a) Pre-laminated with decorative lamination one
side and other side balancing lamination
Metre
1355.00
b) Pre-laminated with decorative lamination one
side and other side balancing lamination
Metre
1770.00
353 Providing and fixing in wall lining medium
density fibre board IS:14587:1998 marked, Pre-
laminated one side decorative lamination and
other side balancing lamination, with necessary
fixing arrangement and screws etc. complete.
Metre
994.00
Metre
1275.00
c) 25 mm thick. 1.00 Sqm 1705.70 One Square
Metre
1706.00
354 Providing and fixing 25mm thick pre-laminated
medium density fibre board exterior grade (
Grade-I) IS:14587:1998 marked one side
decorative and other side balancing lamination
for cupboard shutters edges to be sealed with
PVC edge bending tape 2.00 mm thick of
approved brand including ISI marked nickeled
plated bright finishing M.S. piano hinges IS:3818
marked with necessary screwed complete
Metre
1824.00
355 Providing and fixing skirting with Pre-laminated
medium density fibre board exterior grade
(Grade-I) IS: 14587:1998 marked, (one side
decorative and other side balancing lamination)
with necessary fixing arrangements and screws,
including drilling necessary holes for rawl
arrangements and screws, including drilling
necessary holes for rawl plugs etc. and edges to
be sealed with PVC edge bending tape 2.00mm
thick of approved brand complete.
Metre
1629.00
Metre
2061.00
978386.00
356 Structural steel work in single section fixed with
or without connecting plate including cutting,
hoisting, fixing in position and applying a
priming coat of approved steel primer all
complete.
357 Structural steel work riveted, bolted or welded
in built up sections, trusses and framed work,
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel
primer all complete.
Total of the Sub-Head - Wood And Pvc Work :
Sub-Head : Steel Work
358 Providing and fixing in position collapsible steel
shutters with vertical channels 20x10x2mm and
braced with flat iron diagonals 20x5mm size,
with top and bottom rail of T-iron 40x40x6mm,
with 40mm dia steel pulleys, complete with
bolts, nuts, locking arrangement, stoppers,
handles, including applying a priming coat of
approved steel primer.
Metre
4978.00
359 Providing and fixing 1mm thick M.S. sheet
sliding-shutters, with frame and diagonal braces
of 40x40x6mm angle iron, 3mm M.S. gusset
plates at the junctions and corners, 25mm dia
pulley, 40x40x6mm angle and T-iron guide at
the top and bottom respectively, including
primer.
Metre
3419.00
360 Providing and fixing 1mm thick M.S. sheet door
with frame of 40x40x6mm angle iron and 3mm
M.S. gusset plates at the junctions and corners,
all necessary fittings complete, including
primer.
a) Using M.S. angels 40x40x6 mm for diagonal
braces.
Metre
2942.00
b) Using flats 30x6mm for diagonal braces and
central cross piece.
Metre
2785.00
361 Supplying and fixing rolling shutters of
approved make, made of required size M.S.
laths, interlocked together through their entire
length and jointed together at the end by end
locks, mounted on specially designed pipe shaft
with brackets, side guides and arrangements for
inside and outside locking with push and pull
operation complete, including the cost of
providing and fixing necessary 27.5 cm long
wire springs manufactured from high tensile
steel wire of adequate strength conforming to
IS: 4454 -part 1 and M.S. top cover of required
thickness for rolling shutters.
a) 80x1.25mm M.S. laths with 1.25 mm thick top
cover.
Metre
2044.00
b) 80x1.20 mm M.S. laths with 1.20 mm thick top
cover.
Metre
1831.00
c) 80x0.90 mm M.S. laths with 0.90 mm thick top
cover.
Metre
1738.00
362 Providing and fixing ball bearing for rolling
shutters.
1.00 No. 436.45 Each 436.00
363 Extra for providing mechanical device chain and
crank operation for operating rolling shutters.
a) Exceeding 10.00 sqm and upto 16.80 sqm in the
area.
Metre
666.00
b) Exceeding 16.80 sqm in area. 1.00 Sqm 700.35 One Square
Metre
700.00
364 Extra for providing grilled rolling shutters
manufactured out of 8 mm dia. M.S. bar instead
of laths as per design approved by Engineer-in-
charge.(area of grill to be measured).
Metre
314.00
365 Fixing standard steel glazed doors, windows
and ventilators in walls, including fixing of float
glass panes with glazing clips and special metal-
sash putty of approved make, or metal beading
with screws (only steel windows, glass panes
cut to size and glazing clips or metal beading
with screws, shall be supplied by department
free of cost.
a) Fixing with 15x3 mm lugs 10 cm. long
embedded in cement concrete block 15x10x10
cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size).
b) Fixing with carbon steel galvanised dash
fastener of required dia and size (to be paid for
separately).
366 Providing and fixing factory made ISI marked
steel glazed doors, windows and ventilators
side /top /centre hung, with beading and all
members such as F7D, F4B, K11 B and K12 B
etc. complete of standard rolled steel sections,
joints mitred and flash butt welded and sash
bars tenoned and riveted, including providing
and fixing of hinges, pivots, including priming
coat of approved steel primer , but excluding
the cost of other fittings, complete all as per
approved design (sectional weight of only steel
members shall be measured for payment).
cm of C.C. 1:3:6 (1 Cement : 3coarse sand : 6
1.00 Kg 105.10 One Kilogram 105.00
separately).
367 Extra for providing and fixing steel beading of
size 10 x 10 x 1.6 mm (box type) approved
shape and section with screws instead of
glazing clips and metal sash putty in steel doors,
windows, ventilators and composite units.
Metre
36.00
368 Providing and fixing T-iron frames for doors,
windows and ventilators of mild steel Tee-
sections, joints mitred and welded, including
fixing of necessary butt hinges and screws and
primer.
separately).
369 Providing and fixing pressed steel door frames
conforming to IS: 4351, manufactured from
commercial mild steel sheet of 1.60 mm
thickness, including hinges, jamb, lock jamb,
bead and if required angle threshold of mild
steel angle of section 50x25mm, or base ties of
1.60 mm, pressed mild steel welded or rigidly
fixed together by mechanical means, including
M.S. pressed butt hinges 2.5mm thick with
mortar guards, lock strike-plate and shock
absorbers as specified and applying a coat of
approved steel primer after pre-treatment of
the surface as directed by Engineer-in-charge:
a) Profile B
(i) Fixing with adjustable lugs with split end tail to
each jamb.
Metre
361.00
(ii) Fixing with carbon steel galvanised dash
separately).
Metre
353.00
b) Profile C
each jamb.
Metre
384.00
separately).
Metre
376.00
c) Profile E
each jamb.
Metre
419.00
separately).
Metre
411.00
370 Providing and fixing M.S. Tubular frames for
doors, windows, ventilators and cupboard with
rectangular/ L-Type sections, made of 1.60 mm
thick M.S. Sheet, joints mitred, welded and
grinded finish, with profiles of required size,
including fixing of necessary butt hinges and
screws and applying a priming coat of approved
steel primer.
1.00 Kg 133.65 One Kilogram 134.00
separately).
1.00 Kg 125.55 One Kilogram 126.00
371 Steel work in built up tubular ( round, square or
rectangular hollow tubes etc.) trusses etc.,
including cutting, hoisting, fixing in position and
primer, including welding and bolted with
special shaped washers etc. complete.
a) Hot finished welded type tubes. 1.00 Kg 95.85 One Kilogram 96.00
b) Hot finished seamless type tubes. 1.00 Kg 111.70 One Kilogram 112.00
c) Electric resistance or induction butt welded
tubes.
1.00 Kg 117.80 One Kilogram 118.00
372 Providing and fixing M.S. fan clamp type I or II
of 16 mm dia M.S. bar bent to shape with
hooked ends in R.C.C. slabs, beams during
laying including painting the exposed portion of
loop, all as per standard design complete.
1.00 No. 119.05 Each 119.00
373 Providing and fixing circular/ Hexagonal cast
iron or M.S. sheet box for ceiling fan clamp, of
internal dia 140mm, 73mm height, top lid of
1.5mm thick M.S. sheet with its top surface
hacked for proper bonding, top lid shall be
screwed into the cast iron/ M.S. sheet box by
means of 3.3mm dia. round headed screws, one
lock at the corners. Clamp shall be made of
12mm dia M.S. bar bent to shape as per
standard drawing.
1.00 No. 138.00 Each 138.00
374 Providing and fixing mild steel round holding
down bolts with nuts and washer plates
complete.
375 Providing and fixing bolts including nuts and
washers complete.
376 Providing and fixing M.S. rivets of sizes in
position.
1.00 Kg 129.80 One Kilogram 130.00
377 Welding by gas or electric plant including
transportation of plant at site etc. complete.
1.00 cm 2.85 One
Centimetre
3.00
378 Steel work welded in built up sections/ framed
work including cutting, hoisting, fixing in
position and applying a priming coat of
approved steel primer using structural steel etc.
as required.
a) In stringers, treads, landings etc. of stair cases,
including use of chequered plate wherever
required, all complete.
b) In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works.
379 Providing and fixing hand rail of approved size
by welding etc. to steel ladder railing, balcony
railing, staircase railing and similar works,
including applying a priming coat of approved
steel primer.
a) M.S. tube. 1.00 Kg 97.45 One Kilogram 97.00
b) E.R.W. tubes. 1.00 Kg 122.80 One Kilogram 123.00
c) G.I. pipes 1.00 Kg 105.15 One Kilogram 105.00
380 Providing and fixing carbon steel galvanised
(minimum coating 5 micron) dash fastener of 10
mm dia double threaded 6.8 grade (yield
strength 480 N/sq mm), counter sunk head,
comprising of 10 m dia polyamide PA 6 grade
sleeve, including drilling of hole in frame,
concrete/ masonry, etc. as per direction of
Engineer-in-charge.
a) 10 x60 mm 1.00 No. 61.60 Each 62.00
b) 10 x80 mm 1.00 No. 66.60 Each 67.00
c) 10 x120 mm 1.00 No. 82.45 Each 82.00
d) 10 x140 mm 1.00 No. 92.45 Each 92.00
e) 10 x160 mm 1.00 No. 114.05 Each 114.00
381 Providing and fixing stainless steel ( Grade 304)
railing made of Hollow tubes, channels, plates
etc., including welding, grinding, buffing,
polishing and making curvature (wherever
required) and fitting the same with necessary
stainless steel nuts and bolts complete i/c fixing
the railing with necessary accessories &
stainless steel dash fasteners , stainless steel
bolts etc., of required size, on the top of the
floor or the side of waist slab with suitable
arrangement as per approval of Engineer-in-
charge.( for payment purpose only weight of
stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts,
fasteners etc.)
1.00 Kg 611.10 One Kilogram 611.00
382 Providing & fixing fly proof wire gauze to
windows, clerestory windows & doors with M.S.
Flat 15x3mm and nuts & bolts complete.
a) Galvanised M.S. Wire gauze with 0.63mm dia
wire and 1.4 mm aperture on both sides.
Metre
513.00
b) Stainless steel (grade 304) wire gauze of 0.5
mm dia wire and 1.4 mm aperture on both
sides.
Metre
1252.00
383 Providing & fixing glass panes with putty and
glazing clips in steel doors, windows, clerestory
windows all complete with :
a) 4.0 mm thick glass panes. 1.00 Sqm 727.70 One Square
Metre
728.00
b) 5.5 mm thick glass panes. 1.00 Sqm 944.90 One Square
Metre
945.00
30818.00
384 Brick on edge flooring with bricks of class
designation 7.5 on a bed of 12 mm cement
mortar, including filling the joints with same
mortar, with common burnt clay non modular
bricks :
a) 1:4 (1 cement : 4 coarse sand) 1.00 Sqm 650.35 One Square
Metre
650.00
b) 1:6 (1cement : 6 coarse sand) 1.00 Sqm 615.40 One Square
Metre
615.00
385 Dry brick on edge flooring in required pattern
with bricks of class designation 7.5 on a bed of
12 mm mud mortar including filling joints with
Jamuna sand with common burnt clay non
modular bricks.
Metre
508.00
Total of the Sub-Head - Steel Work :
Sub-Head : Flooring
386 Cement concrete flooring 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate)
finished with a floating coat of neat cement
including cement slurry, but excluding the cost
of nosing of steps etc. complete.
a) 40mm thick with 20mm nominal size stone
aggregate.
Metre
317.00
387 52 mm thick cement concrete flooring with
concrete hardener topping, under layer 40 mm
thick cement concrete 1:2:4 (1 cement : 2
nominal size) and top layer 12mm thick cement
hardener consisting of mix 1:2 (1 cement
hardener mix : 2 graded stone aggregate 6 mm
nominal size) by volume,. hardening compound
mixed @ 2 litre per 50kg of cement or as per
manufacturers specifications. This includes cost
of cement slurry, but excluding the cost of
nosing of steps etc. complete.
Metre
480.00
388 62 mm thick cement concrete flooring with
concrete hardener topping, under layer 50 mm
thick cement concrete 1:2:4 (1 cement : 2
nominal size) and top layer12mm thick cement
hardener consisting of mix 1:2 (1 cement
hardener mix : 2 graded stone aggregate, 6mm
nominal size) by volume, hardening compound
mixed @ 2 litre per 50kg of cement or as per
manufactures specifications. This includes cost
of cement slurry, but excluding the cost of
nosing of steps etc. complete.
Metre
528.00
389 Cement plaster skirting (up to 30 cm height)
with cement mortar 1:3 (1 cement : 3 coarse
sand) finished with a floating coat of neat
cement.
Metre
299.00
390 Cement concrete pavement with 1:2:4 (1
aggregate 20 mm nominal size) including
finishing complete.
Metre
5189.00
391 Extra for making chequers of approved pattern
on cement concrete floors, steps, landing,
pavements etc.
Metre
30.00
392 40 mm thick marble chips flooring rubbed and
polished to granolithic finish, under layer 34
mm thick cement concrete 1:2:4 (1 cement :
2coarse sand : 4 graded stone aggregate
12.5mm nominal size) and top layer 6mm thick
with white, black, chocolate, grey, yellow or
green marble chips of sizes from 1mm to 4mm
nominal size laid in cement marble powder mix
3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder mix
: 7 marble chips) by volume including cement
slurry etc. complete :
a) Dark shade pigment with ordinary cement. 1.00 Sqm 530.30 One Square
Metre
530.00
b) Light shade pigment with white cement. 1.00 Sqm 578.10 One Square
Metre
578.00
c) Medium shade pigment with 50% white cement
and 50% ordinary cement.
Metre
554.00
d) White cement without any pigment. 1.00 Sqm 554.70 One Square
Metre
555.00
e) Light shade pigment with ordinary cement. 1.00 Sqm 536.90 One Square
Metre
537.00
f) Ordinary cement without any pigment. 1.00 Sqm 510.70 One Square
Metre
511.00
393 40 mm thick marble chips flooring, rubbed and
polished to granolithic finish, under layer 31mm
thick cement concrete 1:2:4 (1 cement : 2coarse
sand : 4 graded stone aggregate 12.5mm
nominal size) and top layer 9mm thick with
white, black, chocolate, grey, yellow or green
marble chips of sizes from 4mm to 7mm
nominal size, laid in cement marble powder mix
proportion of 4:7 (4 cement marble powder : 7
marble chips) by volume, including cement
slurry etc. complete.
a) Dark shade pigment with Ordinary cement. 1.00 Sqm 547.10 One Square
Metre
547.00
Metre
615.00
Metre
581.00
Metre
584.00
Metre
554.00
Metre
520.00
394 40 mm thick marble chips flooring, rubbed and
polished to granolithic finish, under layer 28
mm thick cement concrete 1:2:4 (1 cement :
2coarse sand : 4 graded stone aggregate
12.5mm nominal size) and top layer 12mm thick
with white, black, chocolate, grey yellow or
green marble chips of sizes from 7mm to 10mm
nominal size laid in cement marble powder mix
proportion of 2:3 (2 cement marble powder mix
: 3 marble chips) by volume including cement
slurry etc. complete :
a) Dark shade pigment with ordinary cement. 1.00 Sqm 572.00 One Square
Metre
572.00
Metre
668.00
Metre
620.00
Metre
617.00
Metre
585.00
Metre
535.00
395 Marble chips skirting (up to 30 cm height)
rubbed and polished to granolithic finish, top
layer 6 mm thick with white, black, chocolate,
grey, yellow or green marble chips of sizes from
smallest to 4 mm nominal size laid in cement
marble powder mix 3:1 (3 cement : 1marble
powder) by weight in proportion of 4:7 (4
cement marble powder mix : 7 marble chips) by
volume :
a) 18 mm thick with under layer 12 mm thick in
cement plaster 1:3 (1 cement : 3 coarse sand) :
(i) Dark shade pigment with ordinary cement. 1.00 Sqm 727.45 One Square
Metre
727.00
(ii) Light shade pigment with white cement. 1.00 Sqm 775.25 One Square
Metre
775.00
(iii) Medium shade pigment with 50% white cement
Metre
751.00
(iv) White cement without any pigment. 1.00 Sqm 751.85 One Square
Metre
752.00
(v) Light shade pigment with ordinary cement. 1.00 Sqm 734.05 One Square
Metre
734.00
(vi) Ordinary cement without any pigment. 1.00 Sqm 708.70 One Square
Metre
709.00
396 Providing and fixing glass strips in joints of
terrazo/ cement concrete floors.
a) 40 mm wide and 4 mm thick. 1.00 m 33.80 One Running
Metre
34.00
397 Extra for laying terrazo flooring on staircase
treads not exceeding 30 cm in width including
cost of forming, nosing etc.
Metre
33.00
398 Crazy marble stone flooring, including filling the
gaps with light shade pigment with white
cement marble powder mixture (3 parts of
white cement : 1 part of marble powder) by
weight in proportion of 4:7 (4cement marble
powder mix : 7 white, black or white and black
marble chips of sizes from 1mm to 4mm
nominal size by volume), with under layer
25mm thick cement concrete 1:2:4 (1 cement :
2 coarse sand : 4graded stone aggregate 12.5
mm nominal size), including rubbing, polishing
and cement slurry etc. complete :
a) 18 mm thick crazy marble stone white, black or
as specified.
Metre
851.00
399 Precast terrazo tiles 22mm thick with graded
marble chips of size upto 12mm, laid in floors,
and landings, jointed with neat cement slurry
mixed with pigment to match the shade of the
tiles including rubbing and polishing complete,
on 20 mm thick bed of cement mortar 1:4
(1cement :4 coarse sand) :
a) Light shade pigment using white cement. 1.00 Sqm 870.70 One Square
Metre
871.00
b) Medium shade pigment using 50%white cement
Metre
819.00
c) Dark shade pigment using ordinary cement. 1.00 Sqm 767.65 One Square
Metre
768.00
d) Ordinary cement without any pigment. 1.00 Sqm 729.85 One Square
Metre
730.00
400 Extra if terrazo tiles are laid in treads of steps
not exceeding 30 cm in width.
Metre
42.00
401 Precast terrazo tiles 22 mm thick with graded
marble chips of sizes upto 12 mm, in skirting
and risers of steps not exceeding 30 cm in
height, on12 mm thick cement plaster 1:3 (1
cement : 3 coarse sand), jointed with neat
cement slurry mixed with pigment to match the
shade of the tiles, including rubbing and
polishing complete with tiles of :
Metre
1131.00
b) Medium shade pigment using 50% white
cement and 50% ordinary cement.
Metre
1067.00
Metre
1002.00
Metre
954.00
402 Chequered terrazo tiles 22 mm thick with
graded marble chips of size up to 6 mm in
floors, jointed with neat cement slurry mixed
with pigment to match the shade of the tiles
including rubbing and polishing complete, on 20
mm thick bed of cement mortar 1:4 (1 cement
:4coarse sand) :
Metre
954.00
cement, 50% ordinary cement.
Metre
877.00
Metre
806.00
Metre
768.00
403 Chequerred precast cement concrete tiles 22
mm thick in footpath & courtyard, jointed with
neat cement slurry mixed with pigment to
match the shade of tiles including rubbing and
cleaning etc. complete, on 20mm thick bed of
cement mortar 1:4 (1 cement: 4 coarse sand).
Metre
1009.00
cement 50% Grey cement.
Metre
853.00
Metre
646.00
Metre
608.00
404 Providing and fixing 10mm thick acid and/or
alkali resistant tiles of approved make and
colour using acid and/or alkali resisting mortar
bedding and joints filled with acid and/or alkali
resisting cement as per IS : 4457 complete as
per the direction of Engineer-in- Charge.
a) In flooring on a bed of 10 mm thick mortar 1:4
(1 acid proof cement : 4 coarse sand).
(i) Acid and alkali resistant tile. 1.00 Sqm 1197.75 One Square
Metre
1198.00
b) In dado/skirting on 12 mm thick mortar 1:4 (1
acid proof cement : 4 coarse sand).
(i) Acid and alkali resistant tile. 1.00 Sqm 1259.85 One Square
Metre
1260.00
405 Tile work in skirting, risers of steps and dado up
to 2 m height over 12 mm thick bed of cement
mortar 1:3 (1 cement :3 coarse sand) and
jointed with grey cement slurry @ 3.3 kg/sqm
including pointing in white cement mixed with
pigment of matching shade complete.
a) Marble tiles (polished) Raj Nagar.
Metre
830.00
406 Marble stone flooring with 18mm thick marble
stone as per sample of marble shall be
approved by Engineer-in-charge over 20 mm
(average) thick base of cement mortar 1:4 (1
cement : 4 coarse sand) laid and jointed with
grey cement slurry including rubbing and
polishing complete with :
a) Makrana white second quality. 1.00 Sqm 3132.05 One Square
Metre
3132.00
b) Raj Nagar plain. 1.00 Sqm 1435.70 One Square
Metre
1436.00
c) Agaria White 1.00 Sqm 2130.25 One Square
Metre
2130.00
d) Black Zebra. 1.00 Sqm 1302.10 One Square
Metre
1302.00
e) Udaipur green marble 1.00 Sqm 1555.90 One Square
Metre
1556.00
f) Pink plain marble. 1.00 Sqm 1495.80 One Square
Metre
1496.00
407 Extra for pre finished nosing to treads of steps
of marble stone.
Metre
249.00
408 Extra for marble stone flooring in treads of
steps and risers using single length up to 2.00
metre .
Metre
290.00
409 Kota stone slab flooring over 20 mm (average)
thick base laid over and jointed with grey
cement slurry mixed with pigment to match the
shade of the slab including rubbing and
polishing complete with base of cement mortar
1 : 4 (1 cement : 4 coarse sand) :
Metre
1072.00
410 Kota stone slabs 20 mm thick in risers of steps,
skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement
3coarse sand) and jointed with grey cement
slurry mixed with pigment to match the shade
of the slabs, including rubbing and polishing
complete.
Metre
1101.00
411 40 mm thick fine dressed stone flooring over 20
mm (average) thick base of cement mortar 1:5 (
1cement : 5 coarse sand) with joints finished
flush.
Metre
521.00
Metre
547.00
412 40 mm thick fine dressed stone flooring over 20
mm (average)thick base of cement mortar 1:5
(1 cement : 5 coarse sand) including pointing
with cement mortar 1:2 (1 cement : 2 stone
dust) with an admixture of pigment to match
the shade of stone.
Metre
614.00
Metre
640.00
413 40 mm thick rubbed stone flooring over 20 mm
(average) thick base of cement mortar 1:5 (1
cement :5 coarse sand) with joints 3mm thick,
side buttered with cement mortar 1:2 (1
cement : 2 stone dust) admixed with pigment to
match the shade of stone and pointing with
same mortar
Metre
678.00
Metre
704.00
414 Extra for pre finished nosing in treads of steps
of Kota stone/ sand stone slab.
Metre
68.00
415 Extra for Kota stone/ sand stone in treads of
steps and risers using single length up to 1.05
metre .
Metre
15.00
416 25mm wooden planking, tongued and grooved
in flooring including fixing with iron screws
complete with :
a) Second class teak wood 1.00 Sqm 3192.10 One Square
Metre
3192.00
b) Second class deodar wood 1.00 Sqm 2240.25 One Square
Metre
2240.00
417 38mm thick wood block flooring of first class
teak wood laid over 25mm thick leveling layer
of cement concrete 1:2:4 (1 cement : 2 coarse
sand: 4 graded stone aggregate 10mm nominal
size) to be paid separately coated with a thin
layer of hot bitumen penetration 80/25 (blown
type)@ 2.45 kg per sqm. including fixing blocks
in position after dipping in hot bitumen (blown
type) up to half depth, planed, levelled smooth
and finished complete.
Metre
6377.00
418 Providing and fixing M.S. angle 50x50x5 mm to
act as nosing with lugs of M.S. flat 10x5 mm
10cm long forked at end 60cm apart (minimum
three lugs to be provided) including necessary
welding and applying a priming coat of
approved primer on exposed surface etc.
complete.
419 Providing and fixing Ist quality ceramic glazed
wall tiles conforming to IS : 15622 (thickness to
be specified by the manufacturer ) of approved
make in all colours, shades except burgundy,
bottle green, black of any size as approved by
Engineer-in-Charge, in skirting, risers of steps
and dados over 12 mm thick bed of cement
Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per
sqm including pointing in white cement mixed
with pigment of matching shade complete.
Metre
794.00
420 Providing and laying Ceramic glazed floor tiles
300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS
:15622 of approved make in colours such as
White, Ivory, Grey, Fume Red Brown, laid on 20
mm thick Cement Mortar 1:4 (1 Cement :
4Coarse sand) including pointing the joints with
white cement and matching pigment etc.,
complete.
Metre
822.00
421 Providing and laying Ceramic glazed floor tiles
300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS
:15622 of approved make in all colours, shades,
except White, Ivory, Rey, Fume Red Brown laid
on 20mm thick bed of Cement Mortar 1:4(1
Cement : 4 Coarse sand) including pointing the
joints with white cement and matching
pigments etc., complete.
Metre
834.00
422 Providing and laying rectified Glazed Ceramic
floor tiles 300x300 mmor more (thickness to be
specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in
colours White, Ivory, Rey, Fume Red Brown, laid
on 20mm thick cement mortar 1:4 (1Cement : 4
Coarse sand) including grouting the joints with
white cement and matching pigments etc.,
complete.
Metre
987.00
423 Providing and laying rectified Glazed Ceramic
floor tiles 300x300 mmor more (thickness to be
specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in
all colours, shades, except White, Ivory, Grey,
Fume Red Brown, laid on 20 mm thick Cement
Mortar 1:4 (1 Cement : 4 Coarse sand) including
pointing the joints with white cement and
matching pigments etc., complete.
Metre
1023.00
424 Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08%and conforming to IS : 15622 of approved
make in all colours and shades, laid on 20mm
sand) including grouting the joints with white
cement and matching pigments etc., complete.
a) Size of Tile 500x500 mm 1.00 Sqm 1241.85 One Square
Metre
1242.00
b) Size of Tile 600x600 mm 1.00 Sqm 1402.55 One Square
Metre
1403.00
c) Size of Tile 800x800 mm 1.00 Sqm 1644.55 One Square
Metre
1645.00
d) Size of Tile 1000x1000 mm 1.00 Sqm 2317.20 One Square
Metre
2317.00
425 Deduct for not using 20mm thick cement
mortar 1:4 (1 cement : 4 coarse sand) bedding
in laying of floor tiles.
Metre
-415.00
426 Fixing glazed/ Ceramic/ Vitrified floor tiles with
cement based high polymer modified quick-set
tile adhesive (Water based) conforming to IS:
15477, in average 3mm thickness.
Metre
392.00
427 Crazy ceramic tile flooring, with under layer 12
mm thick cement mortar 1:4 (1 cement: 4
coarse sand), with joints not exceeding 5 mm,
including filling the gaps with ordinary cement
mixture & mixing with synthetic polyester fibre,
triangular in shape having specific gravity of1.34
to 1.40, cross section size ranging from 10 to 40
micron & length upto 6 mm , mixing fibre @
125 grams per 50 kg of cement in cement
mortar, including providing and mixing water
proofing material in mortar@ 1 kg per 50 kg of
cement , all complete as per direction of
Engineer-in-charge.
Metre
407.00
428 Providing and laying 500x500x40mm thick Turf
paver (Turf pave XD) on 150mm thick sub grade
of compacted bed of 20mm thick nominal size
stone aggregate and base course and filling with
150mm thick jamuna sand including spreading,
well ramming, consolidating and finishing
smooth etc. all complete as per direction of
Engineer-in-charge.
Metre
1743.00
429 Providing and laying Vitrified tiles in different
sizes (thickness to be specified by
manufacturer) with water absorption less than
0.08 % and conforming to I.S. 15622, of
approved make in all colours & shade in
skirting, riser of steps, over 12 mm thick bed of
cement mortar 1:3 (1cement: 3 coarse sand),
including grouting the joint with white cement
&matching pigments etc. complete.
Metre
1251.00
Metre
1411.00
Metre
1656.00
Metre
2328.00
430 Providing and laying Vitrified tiles in different
sizes (thickness to be specified by the
manufacturer), with water absorption less than
0.08%and conforming to IS: 15622, of approved
brand & manufacturer in all colours and shade
in skirting, riser of steps, laid with cement based
high polymer modified quick set tile adhesive
(water based) conforming to IS: 15477, in
average 6 mm thickness, including grouting of
joints(Payment for grouting of joints to be
made separately).
Metre
1436.00
Metre
1597.00
Metre
1841.00
Metre
2514.00
431 Grouting the joints of flooring tiles having joints
of 3 mmwidth, using epoxy grout mix of 0.70 kg
of organic coated filler of desired shade(0.10 kg
of hardener and 0.20 kg of resin per kg),
including filling/grouting and finishing complete
Metre
214.00
Metre
181.00
Metre
147.00
Metre
107.00
432 Providing and laying Vitrified tiles in floor with
different sizes (thickness to be specified by the
manufacturer), with water absorption less
than0.08% and conforming to IS:15622 , of
approved brand & manufacturer in all colours
and shade, laid with cement based high
polymer modified quick set tile adhesive (water
based) conforming to IS : 15477, in average 6
mm thickness, including grouting of joints
(Payment for grouting of joints to be made
separately).
Metre
1379.00
Metre
1540.00
Metre
1784.00
Metre
2457.00
433 Deduct for not grouting the joints with white
cement and matching pigment in the items of
fixing of vitrified tiles
Metre
-8.00
434 Providing and laying machine cut, mirror
polished, Italian Marble stone flooring laid in
required pattern in linear portion of the
building all complete as per architectural
drawings, with 18 mm thick stone slab laid over
20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed
with white cement slurry @ 4.4 kg/sqm
including pointing with white cement slurry
admixed with pigment to match the marble
shade including rubbing, curing and polishing
etc. all complete as specified and as directed by
the Engineer-in-Charge.
Emperadore etc.
Metre
5112.00
435 Providing and laying machine cut, mirror
polished Marble stone flooring, in required
design (Simple geometrical, abstract etc.) and in
patterns in combination with Italian marble
stones of different colours, shades and finished
surface texture etc., in linear portions of the
building, all complete as per the architectural
drawings, with 18 mm thick stone slab laid over
20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed
with white cement slurry @ 4.4 kg/sqm
including pointing with white cement slurry
admixed with pigment to match the marble
shade including rubbing , curing and polishing
etc. all complete as specified and as directed by
the Engineer-in-Charge.
Emperadore etc.
Metre
5339.00
436 Providing and fixing Glass mossaic tiles at
finished plain wall surface of size 20 mm x 20
mm x 4 mm in all colour, design , fixing in
customize design as per direction of Engineer-in-
Charge. The glass mosaic tiles to be fixed on the
wall surface with the help of approved adhesive
applied at the rate of 2.5 kg per sqm and
grouting of the same. The rate is inclusive of all
operation, material and required pattern
approved by Engineer-in-Charge:
Metre
1587.00
437 Providing and fixing removable raised/false
access flooring with system and its components
of approved make for different plenum height
with possible height adjustment upto 50mm,
comprising of modular load bearing floor panels
supported on G.I. rectangular stinger frame
work and G.I. Pedestal etc. all complete, as per
the architectural drawings, as specified and as
directed by Engineer-in-charge consisting of :
(a) Providing at required spacing to form
modular framework, pedestals made out of GI
tube of thickness minimum 2 mm and 25mm
outer diameter, fully welded on to the G.I. Base
plate of size 100mmx100mmx3mm at the
bottom of the pedestal tube, G.I. pedestal head
of size 75mmx75mmx3.5mm welded with GI
fully threaded stud16mm outer diameter with
two GI Check nuts screwed on the stud for level
adjustment upto 50mm, locking and stabilizing
the pedestal head in position at the required
level. The pedestals shall be fixed to the
subfloor (base) through base plate using epoxy
based adhesive of approved make or the
machine screw with rawl plug.
(b) Stringers system in all steel construction hot
dipped galvanized of rectangular size
570x20x30x0.80mm thick having holes at both
ends for securing the stringers on to the
pedestal head using fully threaded screws
ensuring maximum lateral stability in all
directions, the grid formed by the pedestal and
stringer assembly shall receive the floor panel,
this system shall provide adequate solid, rigid
support for access floor panel, the system shall
provide a minimum clear uninterrupted
clearance between the bottom of the floor for
electrical conduits and wiring etc. all complete
as per the architectural drawings, as specified
and as directed by the Engineer-in-charge.
(c) Providing and fixing Access Floor panel of
600x600x32 mm medium grade Filled Steel anti
static high pressure Lamination of 800H
grade(FS800H). Access Floor panel shall be steel
welded construction with an enclosed bottom
pan with uniform pattern of 64 hemispherical
cones. The top and bottom plates of Steel
Gauges: top 0.6 mm and bottom 0.7 mm fused
spot welded together (minimum 64 welds in
each dome and 20 welds along each flange).
The panel should be Corroresist epoxy coated
for lifetime rust protection and cavity formed
by the top and bottom plate is filled with
Pyrogrip non-combustible Portland
cementitious core mixed with lightweight
foaming compound. The access floor shall be
factory finished with Anti-static High Pressure
laminate with Non Warp technology upto 1mm
thickness for superior adhesion and Surface
flatness within 0.75mm.
The panel is to withstand a Concentrated Load
of 363 kgs applied on area 25mm x 25mm
without collapse in the centre of the panel
which is placed on four steel blocks. The panel
will withstand and Uniformly Distributed Load
(UDL) minimum1250 kg/sqm and an impact
load of 50kg all complete as per the approved
manufacturers specification and as per the
direction of Engineer-incharge. All specification
must be printed on the side of the panel to
ensure the quality of the product.
a) 300 mm Finished Floor Height (FFH) 1.00 Sqm 4002.80 One Square
Metre
4003.00
b) 450 mm Finished Floor Height (FFH). 1.00 Sqm 4044.60 One Square
Metre
4045.00
126002.00
438 Providing corrugated G.S. sheet roofing
including vertical/curved surface fixed with
polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with
white lead, including a coat of approved steel
primer and two coats of approved paint on
overlapping of sheets complete (up to any pitch
in horizontal/ vertical or curved surfaces),
excluding the cost of purlins, rafters and trusses
and including cutting to size and shape
wherever required.
a) 1.00 mm thick with zinc coating not less than
275gm/m
Metre
958.00
b) 0.80 mm thick with zinc coating not less than
275gm/m
Metre
813.00
c) 0.63 mm thick with zinc coating not less than
275gm/ m
Metre
690.00
439 Extra for straight cutting in C.G.S. sheet roofing
for making opening of area exceeding 40 sq.
decimeter for chimney stacks, sky light etc. :
a) 1.00 mm thick 1.00 m 40.05 One Running
Metre
40.00
b) 0.80 mm thick 1.00 m 32.05 One Running
Metre
32.00
c) 0.63 mm thick 1.00 m 32.05 One Running
Metre
32.00
Total of the Sub-Head - Flooring :
Sub-Head : Roofing
440 Extra for circular cutting in C.G.S. sheet roofing
for making opening of area exceeding 40 square
decimeter :
a) 1.00 mm thick 1.00 m 228.40 One Running
Metre
228.00
b) 0.80 mm thick 1.00 m 182.45 One Running
Metre
182.00
c) 0.63 mm thick 1.00 m 182.45 One Running
Metre
182.00
441 Providing ridges or hips of width 60 cm overall
width plain G.S. sheet fixed with polymer
coated J. or L hooks, bolts and nuts 8 mm dia.
G.I. limpet and bitumen washers complete.
275gm/m
Metre
539.00
275gm/m
Metre
475.00
442 Providing valleys of 90cm wide overall in plain
G.S. sheet fixed with polymer coated J, or L
hooks, bolts and nuts 8 mm dia.. G.I. limpet and
bitumen washers complete :
350gm/m
Metre
1006.00
443 Providing fixing of 40 cm overall width plain
G.S. sheet fixed with polymer coated J, or L
hooks, bolts and nuts, G.I. limpet and bitumen
washer complete, bent to shape and fixed in
wall with cement mortar1:3 (1cement : 3 coarse
sand).
a) 1.00mm thick with zinc coating not less than
275gm/m
Metre
409.00
444 Providing and fixing 15 cm wide 45 cm overall
semi-circular plain G.S. sheet gutter with iron
brackets 40x3mm size, bolts, nuts and washers
etc. including making necessary connections
with rain water pipes complete.
275gm/m
Metre
508.00
275gm/m
Metre
454.00
445 Providing non-asbestos high impact
Polypropylene reinforced cement 6mm thick
corrugated sheets (as per IS: 14871) roofing up
to any pitch and fixing with polymer coated J, or
L hooks, bolts and nuts 8mm dia. G.I. plain and
bitumen washers or with self drilling fastener
and EPDMwashers etc. complete (excluding the
cost of purlins, rafters and trusses), including
cutting sheets to size and shape wherever
required.
Metre
389.00
446 Extra for straight cutting in non- asbestos
polypropylene reinforced cement corrugated,
semi-corrugated 6 mm thick sheet roofing for
making openings of area exceeding 40 square
decimeter for chimneystacks, skylights etc.
Metre
32.00
447 Extra for circular cutting in non-asbestos
polypropylene reinforced cement corrugated/
semi-corrugated 6 mm thick sheet roofing for
making openings of area exceeding 40 square
decimeter.
Metre
89.00
448 Extra for providing and fixing wind ties of 40x
6mm flat iron section.
Metre
112.00
449 Providing and fixing ridges and hips in non-
asbestos fibre cement high impact
polypropylene reinforced roofing with suitable
fixing accessories or self drilling fastener and
EPDM washer etc. complete.
a) Corrugated serrated adjustable ridges 1.00 m 338.45 One Metre 338.00
b) Plain wing adjustable ridges 1.00 m 324.45 One Metre 324.00
c) Closed fitting adjustable ridges 1.00 m 385.15 One Metre 385.00
d) Unserrated adjustable hips 1.00 m 463.75 One Metre 464.00
450 Providing and fixing non-asbestos fibre cement
high impact polypropylene reinforced roofing
accessories in all colours with polymer coated J
or L hooks, bolts and nuts and or G.I. seambolts
and nuts, G.I. plain and bitumen washers or
with self drilling fastener and EPDM washer etc.
complete:
a) Corrugated apron pieces 1.00 m 326.30 One Running
Metre
326.00
b) Eave's filler pieces 1.00 m 233.35 One Running
Metre
233.00
c) North light curves 1.00 m 434.25 One Running
Metre
434.00
d) Ventilator curves 1.00 m 556.95 One Running
Metre
557.00
e) Barge boards 1.00 m 540.40 One Running
Metre
540.00
f) Ridge finials 1.00 pairs 216.45 Each Pair 216.00
g) Special north light curves 1.00 No. 725.25 Each 725.00
h) S type louvers 1.00 m 316.60 One Running
Metre
317.00
451 Providing flat iron brackets 50x3mm size with
necessary bolts, nuts and washers etc. for fixing
asbestos cement/G.S. sheets gutters with
purlins.
Metre
51.00
452 Painting top of roofs with bitumen of approved
quality @ 17 kg per 10 sqm impregnated with a
coat of coarse sand at 60 cudm per 10 sqm
including cleaning the slab surface with brushes
and finally with a piece of cloth lightly soaked in
kerosene oil complete :
a) With residual type petroleum bitumen of grade
VG - 10
1.00 sqm 117.80 One Square
Metre
118.00
453 10 cm thick (average) mud parka of damped
brick earth on roofs laid to slope consolidated
and plastered with 25 mm thick mud mortar
mixed with bhusa @35 kg per cumof earth and
gobri leaping with mix 1:1 (1clay : 1 cow dung)
and covered with flat tile bricks, grouted with
cement mortar 1:3 (1 cement : 3 fine sand)
mixed with 2% of integral waterproofing
compound by weight of cement and finished
neat :
a) With common burnt clay F.P.S.(non modular)
brick tile of class designation 10.
Metre
502.00
454 10 cm thick (average) mud phaska of damped
brick earth on roofs laid to slope consolidated
and plastered with 25 mm thick mud mortar
with bhusha @ 35 kg per cum of earth and
gobri leaping with mix 1:1 (1 clay : 1 cow-dung)
and covered with machine moulded tile bricks,
grouted with cement mortar 1:3 ( 1 cement : 3
fine sand) mixed with 2% of integral water
proofing compound by weight of cement and
finished neat.
a) with machine moulded common burnt clay FPS
(non modular) brick tiles of class designation
12.5, conforming to IS 2690.
Metre
510.00
455 Extar for every additional 1 cm thickness of
mud phaska
Metre
10.00
456 Providing and laying brick tiles over mumty
roofs, grouted with cement mortar 1:3 (1
cement :3 fine sand ) mixed with 2% of integral
water proofing compound by weight of cement
over 12mm layer of cement mortar 1:3
(1cement :3 fine sand) and finished neat
a) With common burnt clay F.P.S. (non modular)
brick tiles of class designation 10.
Metre
381.00
457 Providing and laying pressed clay tiles (as per
approved pattern 20mm nominal thickness of
approved size) on roofs jointed with cement
mortar 1:4 (1 cement :4 coarse sand) mixed
with 2% integral water proofing compound, laid
over a bed of 20mm thick cement mortar 1:4( 1
cement : 4 coarse sand) and finished neat
complete.
Metre
459.00
458 Providing gola 75x75mm in cement concrete
1:2:4 (1 cement :2 coarse sand : 4 stone
aggregate 10 mm and down gauge) including
finishing with cement mortar 1:3(1 cement : 3
fine sand) as per standard design
a) In 75x75mm deep chase 1.00 m 127.95 One Running
Metre
128.00
459 Making khurras 45x45 cm with average
minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C.
sheet1mx1mx400micron, finished with 12mm
cement plaster 1:3 (1 cement :3 coarse sand)
and a coat of neat cement, rounding the edges
and making and finishing the outlet complete.
1.00 No. 167.45 Each 167.00
460 Providing sand stone slab for roofing and laying
them in cement mortar 1 : 4 (1 cement : 4
coarse sand) over wooden karries or R.C.C.
battens or structural steel sections (Karries or
battens or structural steel sections to be paid
separately), including pointing the ceiling joints
with cement mortar 1:3 (1 cement : 3 fine sand
) complete :
a) Red sand stone slab
(i) 40 to 50 mm thick 1.00 Sqm 444.05 One Square
Metre
444.00
b) White sand stone slab :
(i) 40 to 50 mm thick 1.00 Sqm 511.80 One Square
Metre
512.00
461 Providing and fixing insulating board ceiling of
approved quality with necessary nails etc.
complete (frame work to be paid separately) :
a) Natural colour insulating board
Metre
549.00
b) White face insulating board
Metre
664.00
c) Flame retardant face insulating board
Metre
607.00
462 Providing and fixing flat pressed 3 layer medium
density particle board or graded particle board
(Grade I) IS: 3087 marked, in ceiling with
necessary nails etc. complete (frame work to be
paid separately) :
Metre
619.00
463 Providing and fixing plain Multipurpose Cement
board ( High Pressure steam cured ) as per IS :
14862, with suitable screws for fibre cement
board in ceiling etc. complete (frame work to be
paid separately) :
a) 6 mm thick cement board 1.00 Sqm 459.20 One Square
Metre
459.00
464 Extra for Circular cutting including wastages in
ceiling with:
a) 2nd class teak wood planks 20 mm thick 1.00 m 377.00 One Running
Metre
377.00
b) Natural colour insulating board
(i) 12 mm thick 1.00 m 197.25 One Running
Metre
197.00
c) White face insulating board:
Metre
212.00
d) Flame retardant face insulating board:
Metre
204.00
e) Standard quality hard board sheet:
Metre
174.00
(ii) 4.5 mm thick 1.00 m 178.10 One Running
Metre
178.00
465 Extra for providing and fixing ceiling to curved
surfaces in narrow widths
Metre
157.00
466 Providing and fixing false ceiling with 12 mm
thick plain/ semi perforated or with design
ceiling tiles of BWP type phenol formaldehyde
synthetic resin bonded pressed particle board
conforming to IS:3087,finished with a coat of
aluminium primer on both sides & edges
including two coats of synthetic enamel paint of
approved quality on exposed face, fixed to a
grid made out of anodised aluminium (with
15micron anodic coating) T-sections 35 x15x1.5
mm size main runners and cross runners
23.5x19x1.5 mm fixed to main runners placed
600mm centre to centre both ways so as to
form a grid of 600 mm square. The frame work
shall be suspended from ceiling by level
adjusting hangers of 6 mm dia M.S rod fixed to
roof slab by means of ceiling cleats and dash
fastener. The suspenders shall be placed 600 x
1200mm centre to centre including fixing to the
frame with C.P brass screws and applying a
priming coat of zinc chromate yellow primer
(aluminium frame work shall be paid
separately).
Metre
630.00
467 Extra for providing 3 mm thick translucent
white acrylic plastic sheets of approved quality
in false ceiling instead of 12 mm thick plain or
design particle board ceiling tiles.
Metre
360.00
468 Providing 10 mm thick plaster of Paris (gypsum
anhydrous) ceiling up to a height of 5 m above
floor level over first class kail wood strips
25x6mm with 10 mm gap in between and
reinforced with rabbit wire mesh fixed to
wooden frame (frame work to be paid
separately) :
a) Flat surfaces 1.00 Sqm 770.25 One Square
Metre
770.00
b) Curved surfaces 1.00 Sqm 890.45 One Square
Metre
890.00
469 Extra for any sunk or raised moldings in the
plaster of Paris (Gypsum anhydrous) ceiling
Metre
225.00
470 Extra for providing plaster of Paris (Gypsum
anhydrous) ceiling above 5metres height from
floor level.
1.00 units 92.35 sqm per
metre height
92.00
471 Providing and fixing thermal insulation of ceiling
(under deck insulation) with Resin Bonded Fibre
glass wool conforming to IS : 8183, density 24kg
/ m3, 50 mm thick, wrapped in 200 G Virgin
Polythene bags, fixed to ceiling with metallic
cleats (50x50x3 mm) @60 cm and wire mesh of
12.5 mm x 24 gauge wire mesh, for top most
ceiling of building.
Metre
465.00
472 Providing and fixing thermal insulation with
Resin Bonded Fibre glass wool conforming to IS:
8183, density 16 kg/m3, 50 mm thick, wrapped
in200G Virgin Polythene bags placed over
existing false ceiling and held in position by criss-
crossing GI wire.
Metre
236.00
473 Thermal Insulation of roofing with Expanded
polystyrene fixed with suitable adhesive to the
false ceiling as per the directions of the
Engineer-in-charge :
a) With Type N - Normal 50 mm thick 1.00 Sqm 209.50 One Square
Metre
210.00
b) With Type SE - Self Extinguishing type 50 mm
thick
Metre
241.00
474 Providing and fixing 100 mm diameter and 60
cm long rain water spout in cement mortar 1:4
(1 cement : 4 fine sand).
a) Stone ware spout 1.00 No. 77.60 Each 78.00
475 Providing and fixing M.S. holder bat clamps of
approved design to C.I. or S.C.I. rain water pipes
embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
nominal size) and cost of cutting holes and
making good the walls etc. :
a) 100 mm diameter 1.00 No. 140.65 Each 141.00
b) 150 mm diameter 1.00 No. 146.45 Each 146.00
476 Providing lead caulked joints to sand cast iron
rain water pipes and fittings :
a) 100 mm dia. Pipe 1.00 No. 270.85 Each 271.00
b) 150 mm dia. Pipe 1.00 No. 376.65 Each 377.00
477 Providing, fixing and embedding sand cast iron
accessories for rain water pipes in the masonry
surrounded with 12 mm thick cement mortar of
the same mix, as that of masonry (lead caulking
will be paid for separately) :
a) Sand cast iron plain shoes :
(i) 150 mm diameter 1.00 No. 412.15 Each 412.00
478 Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for
thermal expansion, (i)Single socketed pipes.
a) 75 mm diameter 1.00 m 134.50 One Running
Metre
135.00
b) 110 mm diameter 1.00 m 218.60 One Running
Metre
219.00
479 Providing and fixing on wall face unplasticised -
PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A including
jointing with seal ring conforming to IS :5382
leaving 10 mm gap for thermal expansion.
a) Coupler
(i) 75mm 1.00 No. 100.55 Each 101.00
(ii) 110mm 1.00 No. 133.55 Each 134.00
b) Single pushfit Coupler :
(i) 75mm 1.00 No. 119.10 Each 119.00
(ii) 110mm 1.00 No. 167.25 Each 167.00
c) Single tee with door
(i) 75x75x75 mm 1.00 No. 210.55 Each 211.00
(ii) 110x110x110 mm 1.00 No. 305.35 Each 305.00
d) Single tee without door
(i) 75x75x75 mm 1.00 No. 187.35 Each 187.00
(ii) 110x110x110 mm 1.00 No. 244.95 Each 245.00
e) Bend 87.5
(i) 75 mm bend 1.00 No. 107.50 Each 108.00
(ii) 110 mm bend 1.00 No. 160.25 Each 160.00
f) Shoe (Plain)
(i) 75 mm Shoe 1.00 No. 166.75 Each 167.00
(ii) 110 mm Shoe 1.00 No. 290.35 Each 290.00
480 Providing and fixing unplasticised -PVC pipe
clips of approved design to unplasticised - PVC
rain water pipes by means of 50x50x50mm
hardwood plugs, screwed with M.S. screws of
required length including cutting brick work and
fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete.
a) 75 mm 1.00 No. 156.30 Each 156.00
b) 110 mm 1.00 No. 173.75 Each 174.00
481 Providing and fixing to the inlet mouth of rain
water pipe cast iron grating 15 cm diameter and
weighing not less than 440 grams.
1.00 No. 37.25 Each 37.00
482 Providing and fixing false ceiling at all height
including providing and fixing of frame work
made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of
120 gms/sqm (both side inclusive) as per IS :
277 and consisting of angle cleats of size 25 mm
wide x 1.6 mm thick with flanges of 27 mm and
37 mm, at 1200 mm centre to centre, one
flange fixed to the ceiling with dash fastener
12.5mm dia x 50 mm long with 6 mm dia bolts,
other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts
& bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels
45x15x0.9 mm running at the rate of 1200 mm
centre to centre, to which the ceiling section 0.5
mmthick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of10.5 mm,
at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I.
intermediate channel with connecting clips
made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing
perimeter channels 0.5 mm thick 27 mm high
having flanges of 20mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with
the help of rawl plugs at 450 mm centre, with
25mm long dry wall screws @230 mm interval,
including fixing of gypsum board to ceiling
section and perimeter channel with the help of
dry wall screws of size3.5 x 25 mm at 230 mm
c/c, including jointing and finishing to a flush
finish of tapered and square edges of the board
with recommended jointing compound ,
jointing tapes , finishing with jointing compound
in 3 layers covering upto 150 mm or both sides
of joint and two coats of primer suitable for
board, all as per manufacture's specification
and also including the cost of making openings
for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed,
all complete as per drawings, specification and
direction of the Engineer in Charge but
excluding the cost of painting with :
a) 12.5 mm thick tapered edge gypsum plain
board conforming to IS: 2095- Part I.
Metre
805.00
b) 12.5 mm thick tapered edge gypsum fire
resistant board conforming to IS: 2095- Part I.
Metre
850.00
c) 12.5 mm thick tapered edge gypsum moisture
resistant board.
Metre
891.00
d) Fully Perforated Gypsum Plaster Board of size
1200 x 2400x12.5 mm having approx. 15 %
perforated area with perforation size and
pattern as approved by the Engineer-in-charge
and as per manufacturer's specification, with all
4 sides tapered and backed by acoustical tissue
with NRC value not less than 0.60.
Metre
1691.00
483 Providing and fixing to the inlet mouth of rain
water pipe PTMT (an Engineering
Thermoplastic) grating square (Slit) 150 mm
square with a height of 8 mm and weighing not
less than 100 gms.
1.00 No. 97.65 Each 98.00
484 Providing & fixing UV stabilised fiberglass
reinforced plastic sheet roofing up to any pitch
including fixing with polymer coated 'J' or
'L'hooks, bolts & nuts 8mm dia. G.I
plain/bitumen washers complete but excluding
the cost of purlins, rafters, trusses etc. The
sheets shall be manufactured out of 2400 TEX
panel rovigs incorporating minimum0.3% Ultra-
violet stabiliser in resin system under
approximately 2400 psi and hot cured. They
shall be of uniform pigmentation and thickness
without air pockets and shall conform to IS
10192 and IS 12866.The sheets shall be opaque
or translucent, clear or pigmented, textured or
smooth as specified.
a) 2mm thick corrugated (2.5" or 4.2" or 6") or
step-down (2" or 3" or 6" ) as specified.
Metre
961.00
b) 2mm thick flat. 1.00 Sqm 850.00 One Square
Metre
850.00
485 Providing & fixing on roof pressed clay tile
(Mangalore tile) of 20 mm nominal thickness
and of approved size and as per approved
pattern on steel frame work complete (steel
frame work to be paid separately).
Metre
268.00
486 Providing & laying on roof pressed clay tile
ridge (Mangalore tile) of 20mmthickness and of
approved pattern on steel frame work
complete(steel frame work to be paid
separately).
Metre
130.00
487 Providing and fixing precoated galvanised iron
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge)
0.50 mm + 0.05 %, total coated thickness with
zinc coating 120 gsm as per IS: 277 in 240 mpa
steel grade, 5-7 microns epoxy primer on both
side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches
during transportation and should be supplied in
single length upto 12metre or as desired by
Engineer-in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required.
Metre
615.00
488 Providing and fixing precoated galvanised steel
sheet roofing accessories 0.50 mm (+ 0.05 %)
total coated thickness, Zinc coating 120 gsm as
per IS: 277 in 240 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and
polyester top coat 15-18 microns using self
drilling/ self tapping screws complete :
a) Ridges plain (500 - 600mm). 1.00 m 629.25 One Running
Metre
629.00
b) Flashings/ Aprons.( Upto 600 mm) 1.00 m 606.70 One Running
Metre
607.00
c) North light curves. 1.00 m 658.55 One Running
Metre
659.00
d) Barge board (Upto 300 mm). 1.00 m 572.00 One Running
Metre
572.00
e) Crimp curve 1.00 Sqm 630.20 One Square
Metre
630.00
f) Gutter .(600 mm over all girth). 1.00 m 796.05 One Running
Metre
796.00
489 Providing and fixing tiled false ceiling of
approved materials of size 595x595 mm in true
horizontal level suspended on inter locking
metal grid of hot dipped galvanized steel
sections ( galvanized @120 gsm/sqm, both side
inclusive) consisting of main "T" runner with
suitably spaced joints to get required length and
of size 24x38 mm made from 0.30mm thick
(minimum) sheet, spaced at 1200 mm center to
center and cross "T" of size 24x25mm made of
0.30mm thick (minimum) sheet, 1200 mm long
spaced between main "T" at 600 mm center to
center to form a grid of 1200x600 mm and
secondary cross T of length 600 mm and size
24x25 mm made of 0.30 mm thick (minimum)
sheet to be interlocked at middle of the
1200x600 mm panel to form grids of 600x600
mm and wall angle of size 24x24x0.3 mm and
laying false ceiling tiles of approved texture in
the grid including, required cutting/making,
opening for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc. Main "T"
runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed
to ceiling with 12.5 mm dia and 50 mm long
dash fasteners, 4 mm GI adjustable rods with
galvanised butterfly level clips of size 85 x 30 x
0.8 mm spaced at 1200 mm center to center
a) GI metal ceiling Lay in plain Tegular edge Global
white colour tiles of size 595x595 mm, and 0.50
mm thick with 8 mm drop; made of GI sheet
having galvanizing of 100 gms/sqm ( both sides
inclusive) and electro statically polyester
powder coated of thickness 60 microns
(minimum), including factory painted after
bending required, cutting/making, opening for
services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main "T" runners
to be suspended from ceiling using GI slotted
cleats of size 27 x 37 x 25 x1.6x mm fixed to
ceiling with 12.5 mm dia and 50 mm long dash
fasteners, 4 mm GI adjustable rods with
galvanised butterfly level clips of size 85 x30 x
along main T, bottom exposed width of 24 mm
of all T-sections shall be pre-painted with
polyester paint, all complete at all heights as
per specifications drawings and as directed by
Engineer- in- charge.
Metre
1519.00
b) GI Metal Ceiling Lay in perforated Tegular edge
global white color tiles of size 595x595 mm and
0.5 mm thick with 8mm drop; made of GI sheet
having galvanizing of 100 gms/sqm (both sides
inclusive) and 20% perforation area with 1.8mm
dia holes and having NRC (Noise Reduction
Coefficient ) of 0.5, electro statically polyester
powder coated of thickness60 microns
bending and perforation, and backed with a
black Glass fiber acoustical fleece.
Metre
1637.00
c) 12.5mm thick square edge PVC Laminated
Gypsum Tile of size 595x595mm, made of
Gypsum plasterboard; manufactured from
natural gypsum as per IS 2095 part I and
laminated with white 0.16mm thick fire
retardant PVC film on the face side and
12micron metalized polyester on the backside
with all edges sealed with the face side PVC film
which goes around and wraps the edges and is
bonded to the edges and the back side
metalized polyester film so as to make the tile a
completely sealed unit.
Metre
1103.00
d) 12.5 mm thick fully Perforated Gypsum Board
tile made from plasterboard having glass fibre
conforming to IS: 2095 part I ,of size 595x595
mm, having perforation of 9.7x9.7 mm at19.4
mm c/c with center borders of 48 mm and the
side borders of 30 mm, backed with non woven
tissue on the back side, having an NRC ( Noise
Reduction Coefficient) of0.79, with 50 mm resin
bonded glass wool backing.
Metre
1123.00
490 Providing and Fixing 15 mm thick densified
tegular edged eco friendly light weight calcium
silicate false ceiling tiles of approved textures
intone/cosmos / Hexa or equivalent of size 595
x 595 mm in true horizontal level suspended on
inter locking metal grid of hot dipped
galvanised steel sections (galvanising @ 120
grams per sqm including both side) consisting of
main 'T' runner suitably spaced at joints to get
required length and of size 24x38mm made
from 0.33 mm thick(minimum) sheet, spaced
1200mm centre to centre, and cross "T" of size
24x28mm made out of 0.33mm (Minimum)
sheet, 1200mm long spaced between main 'T'
at 600mm centre to centre to form a grid
of1200x600mm and secondary cross 'T' of
length 600mm and size 24x28mm made of
0.33mm thick (Minimum) sheet to be inter
locked at middle of the 1200x 600mm panel to
from grid of size 600x600mm,resting on
periphery walls /partitions on a Perimeter wall
angle pre-coated steel of size(24x24X3000 mm
made of 0.40 mm thick(minimum)
sheet with the help of rawl plugs at 450mm
centre to centre with 25mm long dry wall
screws @ 230mm interval and laying
15mmthick densified edges calcium silicate
ceiling tiles of approved texture(Spintone /
Cosmos/hexa) in the grid including, cutting/
making opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc.,
wherever required, Main 'T' runners to be
suspended from ceiling using G.I. slotted cleats
of size 25x35x1.6mm fixed to ceiling with
12.5mm dia and 50mm long dash fasteners,
4mm G.I. adjustable rods with galvanised steel
level clips of size 85 x 30 x 0.8 mm, spaced
at1200mm centre to centre along main 'T' ,
bottom exposed with 24mm of all T-sections
shall be pre-painted with polyester baked paint,
for all heights, as per specifications, drawings
and as directed by engineer-in-charge. Note :-
Only calcium silicate false ceiling area will be
measured from wall to wall. No deduction shall
be made for exposed frames/opening(cut outs)
having area less than 0.30 sqm. The calcium
silicate ceiling tile shall have NRC. value of
0.50(Minimum), light reflection > 85%,non -
combustible as per B.S. 476 part IV, 100%
humidity resistance and also having thermal
conductivity<0.043 w/m 0 KC.
Metre
1614.00
491 Providing and fixing GI Clip in Metal Ceiling
System of 600x600 mm module which includes
providing and fixing C wall angle of
size20x30x20mm made of 0.5mm thick pre
painted steel along theperimeter of the room
with help of nylon sleeves and wooden screws
at300mm center to centre, suspending the main
C carrier of size10x38x10mm made of G.I steel
0.7 mm thick from the soffit with help ofsoffit
cleat 37x27x25x1.6 mm, rawl plugs of size
38x12 mm and Ccarrier suspension clip and
main carrier bracket at 1000mm c/c.Inverted
triangle shaped Spring Tee having height of 24
mm and widthof 34mm made of GI steel 0.45
mm thick is then fixed to the main Ccarrier and
in direction perpendicular to it at 600mm
centers with help ofsuspension brackets.
Wherever the main C carrier and spring T have
tojoin, C carrier and spring T connectors have to
be used.
All sections tobe galvanized @ 120 gms/sqm
(both side inclusive) Fixing with clip intiles into
spring 'T' with :
a) GI Metal Ceiling Clip in plain Beveled edge
global white color tiles of size 600x600 and
0.5mm thick with 25mm height, made of G I
sheet having galvanizing of 100 gms/sqm (both
sides inclusive) and electro statically polyester
powder coated of thickness 60 microns
bending.
Metre
1659.00
b) GI Metal Ceiling Clip in plain Beveled edge
global white color tiles of size 600x600 and
0.5mm thick with 25mm height, made of G I
sheet having galvanizing of 100 gms/sqm (both
sides inclusive) and 20% perforation area with
1.8mm dia holes and having NRC of 0.5, electro
statically polyester powder coated of thickness
60 microns (minimum), including factory
painted after bending and perforation.
Metre
1787.00
492 Providing and fixing Heat Resistant Terrace Tiles
(300 mm x 300 mm x 20 mm) with SRI (solar
refractive index) > 78, solar reflection >0.70 and
initial emittance >0.75 on waterproof and
sloped surface of terrace, laid on 20 mm thick
cement sand mortar in the ratio of 1:4 (1
cement : 4coarse sand) and grouting the joints
with mix of white cement & marble powder in
ratio of 1:1, including rubbing and polishing of
the surface upto 3 cuts complete, including
providing skirting upto 150 mmheight along the
parapet walls in the same manner.
Metre
1109.00
493 Providing and laying roof insulation with 40 mm
thick impervious sprayed, closed cell free Rigid
Polyurethane foam over deck insulation
conforming to IS - 12432 Pt. III (density of foam
being 40-45 kg/cum),over a coat of
polyurethane primer applied @ 6-8 sqm per
litre, laying400 G polythene sheet over PUF
spray and providing a wearing course of 40 mm
thick cement screed 1: 2 : 4 (1 cement : 2
coarse sand : 4stone aggregate 20 mm nominal
size) in chequered rough finish, in panels of 2.5
m x 2.5 m and embedding with 24 G wire
netting and sealing the joints with polymerized
mastic, all complete as per direction of Engineer-
in-Charge.
Metre
1143.00
Resin Bonded Fibre glass wool conforming to IS:
8183 having density 24 kg/cum , 50 mm thick,
wrapped in 200G Virgin Polythene Bags fixed to
wall with screw, rawl plug & washers and held
in position by criss crossing GI wire etc.
complete as per directions of Engineer-in-
Charge.
Metre
315.00
495 Providing and fixing tiled false ceiling of
approved materials of size 595x595 mm in true
horizontal level, suspended on interlocking
metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both
side inclusive) consisting of main "T" runner
with suitably spaced joints to get required
length and of size 24x25 mm made from 0.30
mm thick (minimum) sheet, spaced at 1200 mm
center to center and cross "T" of size 24x25 mm
made of 0.30 mm thick (minimum) sheet, 1200
mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm
and secondary cross "T" of length 600 mm and
size 24x25 mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of
the 1200x600 mm panel to form grids of
600x600 mm and wall angle of size 24x24x0.3
mm and laying false ceiling tiles of approved
texture in
the grid including, required cutting/making,
opening for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc. Main "T"
runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed
to ceiling with 12.5 mm dia and 50 mm long
dash fasteners, 4 mm GI adjustable rods with
galvanized butterfly level clips of size 85 x 30 x
along main T, bottom exposed width of 24 mm
of all T-sections shall be pre-painted with
polyester paint, all complete for all heights as
per specifications, drawings and as directed by
Engineer-in-charge.
a) 8 mm thick fully perforated calcium silicate tile
made with Calcareous & Siliceous materials
reinforced with cellulose fiber manufactured
through autoclaving process to give stable
crystalline structure with minimum compressive
strength 225 kg/ sq. cm, bending strength 100
kg/sq. cm , of size 595x595 mm, having
perforation of dia. 10 mm with minimum
perforated area 18 % with non woven tissue on
the back side, having an NRC ( Noise Reduction
Coefficient) of 0.85, with 50 mm thick rockwool
of 48 kg /cum backing.
Metre
1332.00
496 Providing & fixing false ceiling at all height
including providing & fixing of framework made
of special section, power pressed from M.S.
sheets and galvanised with zinc coating of 120
gms/ sqm ( both side inclusive) as per IS : 277
and consisting of angle cleat of size 25mm wide
x 1.6mm thick with flanges of 27mm and
37mm, at 1200mm c/c, one flange fixed to the
ceiling with dash fastener 12.5mm dia x 50mm
long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25 x10 x0.50mm
of required length with nuts & bolts of required
size and other end of angle hanger fixed with
intermediate G.I channels 45 x15 x 0.90mm
running at the spacing of 1200 mm c/c, to
which the ceiling section 0.5mm thick bottom
wedge of 80mm with tapered flanges of 26 mm
each having lips of 10.5mm, at 450mm c/c, shall
be fixed in a direction perpendicular to G.I
intermediate channel with connecting clip made
out of 2.64mm dia x 230mm long G.I wire at
every junction,
including fixing perimeter channels 0.50mm
thick 27mm high having flanges of 20mm and
30mm long, the perimeter of ceiling fixed to
wall/ partitions with the help of Rawl plugs at
450mm centre, with 25mm long dry wall screws
@ 230mm interval, including fixing of Calcium
Silicate Board to ceiling section and perimeter
channels with the help of dry wall screws of size
3.5 x25mm at 230mm c/c, including jointing &
finishing to a flush finish of tapered and square
edges of the board with recommended jointing
compounds, jointing tapes, finishing with
jointing compounds in three layers covering up
to 150mm on both sides of joints and two coats
of primer suitable for boards, all as per
manufacture's specification and also including
the cost of making opening for light fittings,
grills, diffusers, cut outs made with frame of
perimeter channels suitably fixed, all complete
as per drawings, specification and direction of
the Engineer in charge but excluding the cost of
painting with:
a) 8 mm thick Calcium Silicate Board made with
Calcareous & Siliceous materials reinforced
with cellulose fiber manufactured through
autoclaving process.
Metre
1009.00
497 Providing and fixing thermal insulation of ceiling
(under deck insulation) with Resin Bonded
Rockwool conforming to IS: 8183,density 48 kg/
m3, 50 mm thick, wrapped in 200 G Virgin
Polythene bags fixed to ceiling with metallic
cleats (50x50x3 mm) @60 cm and wire mesh of
12.5mm x 24 gauge wire mesh, for top most
ceiling of building.
Metre
474.00
Resin bonded rock wool conforming to IS: 8183,
density 48 kg/m3, 50 mm thick, wrapped in 200
G virgin Polythene bags placed over existing
false ceiling and held in position by criss-
crossing GI wire.
Metre
320.00
Resin Bonded rock wool conforming to IS: 8183,
having density 48 kg/m3, 50 mm thick, wrapped
in 200 G Virgin Polythene Bags fixed to wall
with screw, rawel plug & washers and held and
in position by criss crossing GI wire etc.
complete as per directions of Engineer-in-
Charge.
Metre
324.00
500 Providing and applying two coats of High
Albedo paint having minimum Solar Reflective
Index (SRI) 108 (with solar reflectance &
thermal emittance tested as per ASTM) C 1549
and ASTM C 1371 respectively), VOC less than
10 cc/gm. The coating thickness and the
methodology of application shall strictly as per
manufacturer's specifications and as approved
by engineer In charge. Surface preparation
includes cleaning with metal wire brush to
remove all dust, fungus etc., washing with
water all complete. The contractor shall give
guarantee for the performance of SRI and also
the durability of coating, all complete as per
Metre
250.00
55937.00
501 12 mm cement plaster of mix :
a) 1:4 (1 cement: 4 fine sand) 1.00 Sqm 145.40 One Square
Metre
145.00
b) 1:6 (1 cement: 6 fine sand) 1.00 Sqm 133.85 One Square
Metre
134.00
502 15 mm cement plaster on the rough side of
single or half brick wall of mix :
Metre
169.00
Metre
155.00
Metre
203.00
Metre
185.00
a) 1:4 (1 cement: 4 coarse sand) 1.00 Sqm 153.85 One Square
Metre
154.00
b) 1:6 (1 cement: 6 coarse sand) 1.00 Sqm 142.25 One Square
Metre
142.00
505 15 mm cement plaster on rough side of single
or half brick wall of mix :
Sub-Head : Finishing
Total of the Sub-Head - Roofing :
Metre
179.00
Metre
165.00
Metre
216.00
Metre
198.00
507 12 mm cement plaster finished with a floating
coat of neat cement of mix :
Metre
192.00
Metre
181.00
508 15 mm cement plaster on rough side of single
or half brick wall finished with a floating coat of
neat cement of mix :
Metre
218.00
Metre
204.00
509 Cement plaster 1:3 (1 cement: 3 coarse sand)
finished with a floating coat of neat cement.
a) 12 mm cement plaster 1.00 Sqm 200.60 One Square
Metre
201.00
b) 20 mm cement plaster 1.00 Sqm 269.00 One Square
Metre
269.00
510 15 mm cement plaster 1:3 (1 cement: 3 coarse
cement on the rough side of single or half brick
wall.
Metre
228.00
511 18 mm cement plaster in two coats under layer
12 mm thick cement plaster 1:5 (1 cement: 5
coarse sand) finished with a top layer 6mm
thick cement plaster 1:6 (1 cement: 6 fine
sand).
Metre
215.00
512 18 mm cement plaster in two coats under layer
12 mm thick cement plaster 1:5 (1 cement: 5
coarse sand) and a top layer 6mm thick cement
plaster 1:3 (1 cement: 3 coarse sand) finished
rough with sponge.
Metre
231.00
513 12 mm cement plaster 1:2 (1 cement: 2 stone
dust)
Metre
176.00
dust) on the rough side of single or half brick
wall.
Metre
205.00
dust)
Metre
251.00
Metre
120.00
517 6 mm cement plaster 1:3 (1 cement: 3 fine
cement and thick coat of Lime wash on top of
walls when dry for bearing of R.C.C. slabs and
beams.
Metre
162.00
518 Neat cement punning 1.00 Sqm 36.35 One Square
Metre
36.00
519 Rough cast plaster upto 10m height above
ground level with a mixture of sand and gravel
or crushed stone from 6mm to 10mm nominal
size, dashed over and including the fresh plaster
in two layers, under layer 12mm cement plaster
1:4 (1 cement: 4 coarse sand) and top layer
10mm cement plaster 1:3 (1 cement: 3 fine
sand) mixed with 10% finely grounded hydrated
lime by volume of cement.
a) Ordinary cement finish using ordinary cement 1.00 Sqm 371.25 One Square
Metre
371.00
520 Pebble dash plaster upto 10m height above
ground level with a mixture of washed pebble
or crushed stone 6mm to 12.5mm nominal size,
dashed over and including fresh plaster in two
layers under layer 12mm cement plaster 1:4 (1
cement: 4 coarse sand) and top layer 10mm
cement plaster with cement mortar 1:3 (1
cement: 3 fine sand) mixed with 10% finely
grounded hydrated lime by volume of cement.
Metre
352.00
521 Extra for providing and mixing water proofing
material in cement plaster work in proportion
recommended by the manufacturers.
1.00 units 46.70 Per 50 kg bag
of cement
used in the
mix
47.00
522 Extra for plastering exterior walls of height
more than 10 m from ground level for every
additional height of 3 m or part thereof.
Metre
35.00
523 Extra for plastering on circular work not
exceeding 6 m in radius:
a) In one coat 1.00 Sqm 17.05 One Square
Metre
17.00
b) In two coats 1.00 Sqm 26.15 One Square
Metre
26.00
524 Extra for plastering done on moulding cornices
or architraves including neat finish to line and
level:
a) In one coat 1.00 Sqm 247.00 One Square
Metre
247.00
b) In two coats 1.00 Sqm 406.65 One Square
Metre
407.00
525 Extra for plastering :
a) Spherical ceiling 1.00 Sqm 63.70 One Square
Metre
64.00
b) Groined ceiling 1.00 Sqm 69.35 One Square
Metre
69.00
c) Flewing soffits 1.00 Sqm 41.80 One Square
Metre
42.00
526 Providing and applying plaster of paris putty of
2 mm thickness over plastered surface to
prepare the surface even and smooth complete.
Metre
101.00
527 Extra for lining out plaster to imitate stone or
concrete blocks walling.
Metre
40.00
528 12 mm thick plain cement mortar bands in
cement mortar 1:4 (1 cement: 4 fine sand) :
a) Flush Band 1.00 units 2.85 cm per metre 3.00
b) Sunk Band 1.00 units 3.10 cm per metre 3.00
c) Raised Band 1.00 units 3.50 cm per metre 4.00
d) Moulded Band 1.00 units 5.80 cm per metre 6.00
529 18 mm thick plain cement mortar band in
cement mortar 1:4 (1 cement: 4 fine sand):
a) Flush Band 1.00 units 3.50 cm per metre 4.00
b) Sunk Band 1.00 units 3.85 cm per metre 4.00
c) Raised Band 1.00 units 4.35 cm per metre 4.00
d) Moulded Band 1.00 units 7.85 cm per metre 8.00
530 18 mm thick moulded cement mortar band in
two coats under layer 12mm thick with cement
mortar 1:5 (1 cement: 5 coarse sand) top layer
6mm thick with cement mortar 1:4 (1 cement: 4
fine sand).
1.00 units 7.90 cm per metre 8.00
531 Pointing on brick work or brick flooring with
cement mortar 1:3 (1 cement: 3 fine sand) :
a) Flush / Ruled/ Struck or weathered pointing. 1.00 Sqm 95.65 One Square
Metre
96.00
b) Raised and cut pointing 1.00 Sqm 155.30 One Square
Metre
155.00
532 Pointing on tile brick work with cement mortar
1:3 (1 cement: 3 fine sand) :
a) Flush/ Ruled/ Struck or weathered pointing 1.00 Sqm 130.85 One Square
Metre
131.00
533 Pointing on stone work with cement mortar 1:3
(1 cement: 3 fine sand) :
a) Flush/ Ruled pointing 1.00 Sqm 137.85 One Square
Metre
138.00
b) Raised and cut pointing 1.00 Sqm 249.35 One Square
Metre
249.00
534 Raised and cut pointing on stone work in white
cement mortar 1:3 (1 white cement: 3 marble
dust)
Metre
271.00
535 Pointing on stone slab ceiling with cement
mortar 1:2 (1 cement: 2 fine sand):
a) Flush/ Ruled pointing 1.00 Sqm 78.15 One Square
Metre
78.00
536 Extra for pointing on walls on the outside at
height more than 10 m from ground level for
every additional height of 3 m or part there of.
Metre
5.00
537 White washing with lime to give an even shade:
a) New work (three or more coats) 1.00 Sqm 14.35 One Square
Metre
14.00
538 Satna lime wash on walls with one coat 1.00 Sqm 5.85 One Square
Metre
6.00
539 Colour washing such as green, blue or buff to
give an even shade :
a) New work (two or more coats) with a base coat
of white washing with lime
Metre
20.00
b) New work (two or more coats) with a base coat
of whiting
Metre
19.00
540 Distempering with dry distemper of approved
brand and manufacture (two or more coats) of
required shade on new work, over and including
water thinnable priming coat to give an even
shade.
Metre
62.00
541 Distempering with oil bound washable
distemper of approved brand and manufacture
to give an even shade
a) New work (two or more coats) over and
including water thinnable priming coat with
cement primer.
Metre
80.00
542 Distempering with 1st quality acrylic distemper
(ready mixed) of approved manufacturer, of
required shade and colour complete, as per
manufacturer's specification.
a) Two or more coats on new work. 1.00 Sqm 45.25 One Square
Metre
45.00
543 Applying one coat of water thinnable cement
primer of approved brand and manufacture on
wall surface :
a) Water thinnable cement primer. 1.00 Sqm 31.55 One Square
Metre
32.00
544 Finishing walls with water proofing cement
paint of required shade :
a) New work (Two or more coats applied @ 3.84
kg/10 sqm).
Metre
54.00
545 Finishing walls with textured exterior paint of
required shade :
ltr/10 sqm) over and including priming coat of
exterior primer applied @2.20kg/10 sqm.
Metre
127.00
546 Finishing walls with Acrylic Smooth exterior
a) New work (Two or more coat applied @ 1.67
ltr/10 sqm over and including priming coat of
exterior primer applied @ 2.20 kg/10 sqm).
Metre
78.00
547 Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
shade
ltr/ 10 sqm. over and including priming coat of
exterior primer applied @ 2.20 kg/10 sqm).
Metre
90.00
548 Finishing with Deluxe Multi surface paint
system for interiors and exteriors using Primer
as per manufacturers specifications :
a) Two or more coats applied on walls @ 1.25
ltr/10 sqm. over and including one coat of
Special primer applied @ 0.75 ltr / 10sqm
Metre
88.00
b) Painting wood work with Deluxe Multi Surface
Paint of required shade. Two or more coat
applied @ 0.90 ltr/10 sqm over an under coat of
primer applied @0.75 ltr/ 10 sqm of approved
brand or manufacture
Metre
77.00
c) Painting Steel work with Deluxe Multi Surface
Paint to give an even shade. Two or more coat
applied @ 0.90 ltr/10 sqm over an under coat of
primer applied @ 0.80 ltr/ 10 sqm of approved
brand or manufacture
Metre
81.00
549 Applying priming coat :
a) With ready mixed pink or Grey primer of
approved brand and manufacture on wood
work (hard and soft wood)
Metre
31.00
b) With ready mixed aluminium primer of
approved brand and manufacture on resinous
wood and plywood
Metre
32.00
c) With ready mixed red oxide zinc chromate
steel galvanised iron/steel works
Metre
25.00
d) With ready mixed red oxide zinc chromate
steel work (second coat)
Metre
14.00
550 Painting with silicon & acrylic emulsion based
water thinnable sealer of approved brand and
manufacture on wet or patchy portion of
plastered surfaces:
a) One coat 1.00 Sqm 66.25 One Square
Metre
66.00
b) Two coats 1.00 Sqm 105.50 One Square
Metre
106.00
551 Finishing with Epoxy paint (two or more coats)
at all locations prepared and applied as per
manufacturer's specifications including
appropriate priming coat, preparation of
surface, etc. complete.
a) On steel work 1.00 Sqm 109.80 One Square
Metre
110.00
b) On concrete work 1.00 Sqm 114.30 One Square
Metre
114.00
552 Painting on G.S. sheet with synthetic enamel
paint of approved brand and manufacture of
required colour to give an even shade :
a) New work (two or more coats) including a coat
of approved steel primer but excluding a coat of
mordant solution.
Metre
71.00
553 Applying a coat of mordant solution on G.S.
sheet :
a) With a solution of 38 gms of copper acetate in a
litre of soft water
Metre
25.00
b) With a solution made of 13 gms of hydrochloric
acid in a solution of 13 gms each of copper
chloride, copper nitrate and ammonium
chloride dissolved in a litre of soft water.
Metre
25.00
554 Painting (two or more coats) on rain water, soil,
waste and vent pipes and fittings with black
anticorrosive bitumastic paint of approved
brand and manufacture, over and including a
priming of ready mixed zinc chromate yellow
primer on new work :
a) 100 mm diameter pipes 1.00 m 30.75 One Running
Metre
31.00
b) 150 mm diameter pipes 1.00 m 45.90 One Running
Metre
46.00
waste and vent pipes and fittings with synthetic
enamel paint of approved brand and
manufacture and required colour over a priming
coat of approved steel primer on new work.
Metre
34.00
Metre
51.00
556 Painting with oil type wood preservative of
approved brand and manufacture:
a) New work (two or more coats) 1.00 Sqm 22.45 One Square
Metre
22.00
557 Providing and applying two coats of fire
retardant paint on cleaned wood/ply surface @
3.5 sqm per litre per coat including preparation
of base surface as per recommendations of
manufacturer to make the surface fire
retardant.
Metre
217.00
558 Coal tarring two coats on new work using 0.16
and 0.12 litre coal tar per sqm in the first coat
and second coat respectively.
Metre
30.00
559 Wall painting with acrylic emulsion paint of
approved brand and manufacture to give an
even shade:
Metre
72.00
560 Painting with synthetic enamel paint of
even shade :
Metre
63.00
approved brand and manufacture of required
colour to give an even shade:
a) Two or more coats on new work over an under
coat of suitable shade with ordinary paint of
approved brand and manufacture.
Metre
93.00
562 Painting with aluminium paint of approved
brand and manufacture to give an even shade .
a) Two or more coats on new work 1.00 Sqm 58.40 One Square
Metre
58.00
563 Painting with acid proof paint of approved
brand and manufacture of required colour to
give an even shade:
Metre
66.00
564 Painting with black anti-corrosive bitumastic
paint of approved brand and manufacture to
give an even shade:
Metre
54.00
565 Floor painting with floor enamel paint of
colour to give an even shade:
Metre
66.00
566 Varnishing with varnish of approved brand and
manufacture:
a) Two or more coats of glue sizing with copal
varnish over an under coat of flatting varnish.
Metre
96.00
b) Two or more coats glue sizing with spar varnish
or an under coat of flatting varnish.
Metre
97.00
567 French spirit polishing :
a) Two or more coats on new works including a
coat of wood filler.
Metre
176.00
568 Polishing on wood work with ready mixed wax
polish of approved brand and manufacture :
a) New work 1.00 Sqm 75.05 One Square
Metre
75.00
569 Floor polishing on masonry or concrete floors
with wax polish of approved brand and
manufacture.
Metre
36.00
570 Lettering with black Japan paint of approved
brand and manufacture
1.00 units 2.20 per letter per
cm height
2.00
571 Washed stone grit plaster on exterior walls of
height upto 10 metre above ground level, in
two layers, under layer 12mm cement plaster
1:4 (1cement: 4 coarse sand ), furrowing the
under layer with scratching tool, applying
cement slurry on the under layer @ 2 Kg of
cement per square metre, top layer 15mm
cement plaster 1:1/2:2 (1 cement: 1/2 coarse
sand :2 stone chipping 10mm nominal size), in
panels with groove all around as per approved
pattern, including scrubbing and washing the
top layer with brushes and water to expose the
stone chippings, complete as per specification
and direction of Engineer-in- charge (Payment
for providing grooves shall be made separately).
Metre
492.00
572 Forming groove of uniform size in the top layer
of washed stone grit plaster as per approved
pattern using wooden battens, nailed to the
under layer, including removal of wooden
battens, repair to the edges of panels and
finishing the groove complete as per
specifications and direction of the Engineer-in-
charge :
a) 15 mm wide and 15 mm deep groove 1.00 m 28.95 One Running
Metre
29.00
b) 20 mm wide and 15 mm deep groove 1.00 m 29.45 One Running
Metre
29.00
573 Extra for washed grit plaster on exterior walls of
height more than 10m from ground level for
every additional height of 3 m or part thereof.
Metre
78.00
574 Extra for washed stone grit plaster on circular
work not exceeding 6m in radius (in two coats).
Metre
51.00
575 Forming groove of uniform size from 12x12mm
and upto 25x15mm in the top layer of washed
stone grit plastered surface as per approved
pattern, including providing and fixing
aluminum channels of appropriate size and
thickness (not less than 2 mm), nailed to the
under layer with rust proof screws and nails and
finishing the groove complete as per
specifications and direction of the Engineer-in-
Charge.
Metre
70.00
576 Extra for using white cement in place of
ordinary cement in the top layer of the item of
washed stone grit plaster.
Metre
102.00
577 Providing and applying 12 mm thick (average)
premixed formulated one coat gypsum
lightweight plaster having additives and light
weight aggregates as vermiculite/ per liter
respectively conforming to IS: 2547 (Part- 1 & II)
1976, applied on hacked / uneven background
such as bare brick/block/ RCC work on walls &
ceiling at all floors and locations, finished in
smooth line and level etc. complete.
Metre
234.00
578 Extra for addition of synthetic Polyester
triangular fibre of length 6mm, effective
diameter 10-40 microns and specific gravity of
1.34 to 1.40 in cement plaster/mortar by using
125gms. of synthetic Polyester triangular fibre
for 50 Kgs. cement used in cement mortar as
per directions of Engineer-in-Charge.
1.00 units 53.00 Per Bag of
50kg of
Cement
53.00
579 Providing and applying white cement based
putty of average thickness 1 mm, of approved
brand and manufacturer, over the plastered
wall surface to prepare the surface even and
smooth complete.
Metre
85.00
580 Distempering with 1st quality acrylic distemper,
having VOC (Volatile Organic Compound )
content less than 50 grams/ litre, of approved
brand and manufacture, including applying
additional coats wherever required, to achieve
even shade and colour.
a) One coat. 1.00 Sqm 26.10 One Square
Metre
26.00
b) Two coats. 1.00 Sqm 41.75 One Square
Metre
42.00
581 Wall painting with acrylic emulsion paint,
having VOC (Volatile Organic Compound )
content less than 50 grams/ litre, of approved
brand and manufacture, including applying
additional coats wherever required, to achieve
even shade and colour.
Metre
47.00
Metre
71.00
582 Wall painting with premium acrylic emulsion
paint of interior grade, having VOC (Volatile
Organic Compound ) content less than 50
grams/ litre. of approved brand and
manufacture, including applying additional
coats wherever required to achieve even shade
and colour.
Metre
46.00
Metre
71.00
583 Painting with synthetic enamel paint, having
VOC (Volatile Organic Compound) content less
than 150 grams/ litre, of approved brand and
manufacture, including applying additional
coats wherever required to achieve even shade
and colour.
Metre
44.00
Metre
67.00
584 Applying priming coats with primer of approved
brand and manufacture, having low VOC
(Volatile Organic Compound ) content.
a) With ready mixed pink or grey primer on wood
work (hard and soft wood) having VOC content
less than 50 grams/ litre.
Metre
33.00
b) With ready mixed red oxide zinc chromatic on
steel /iron works having VOC content less than
250 grams/litre.
Metre
29.00
c) With water thinnable cement primer on wall
surface having VOC content less than 50
grams/litre.
Metre
32.00
12527.00
585 Repairs to plaster of thickness 12mm to 20mm
in patches of area 2.5 sq. meters and under
including cutting the patch in proper shape,
raking out joints and preparing and plastering
the surface of the walls complete including
disposal of rubbish to the dumping ground
within 50metres lead :
a) With cement mortar 1:4 (1 cement : 4 fine
sand).
Metre
221.00
b) With cement mortar 1:4 (1cement: 4 coarse
sand).
Metre
232.00
586 Fixing chowkhats in existing opening including
embedding chowkhats in floors or walls cutting
masonry for holdfasts, embedding hold fasts in
cement concrete blocks of size 15 x 10 x 10 cm
with cement concrete1:3:6 (1 cement : 3 coarse
size), painting two coats of approved wood
preservative to sides of chowkhats and making
good the damages to walls and floors as
required complete including disposal of rubbish
to the dumping ground within 50 meters lead :
a) Door chowkhats 1.00 No. 719.20 Each 719.00
b) Window chowkhats 1.00 No. 441.70 Each 442.00
Total of the Sub-Head - Finishing :
Sub-Head : Repairs to Buildings
c) Clerestory window chowkhats 1.00 No. 321.85 Each 322.00
587 Fixing chowkhat in existing opening in brick /
RCC wall with dash fasteners/ Chemical
fasteners of appropriate size (3 nos on each
vertical member of door chowkhat and 2 nos.
on each vertical member of window chowkhats)
including Cost of dash fasteners/ chemical
fastener.
1.00 No. 152.55 Each 153.00
588 Making the opening in brick masonry including
dismantling in floor or walls by cutting masonry
and making good the damages to walls, flooring
and jambs complete, to match existing surface
i/c disposal of mulba/ rubbish to the nearest
municipal dumping ground.
a) For door/ window/ clerestory window. 1.00 Sqm 447.40 One Square
Metre
447.00
589 Renewing glass panes, with putty and nails
wherever necessary including racking out the
old putty:
a) Float glass panes of thickness 4 mm 1.00 Sqm 651.40 One Square
Metre
651.00
b) Float glass panes of thickness 5.5 mm 1.00 Sqm 868.60 One Square
Metre
869.00
590 Renewing glass panes, with wooden fillets
wherever necessary:
Metre
826.00
Metre
1043.00
591 Renewing glass panes and refixing existing
wooden fillets:
Metre
689.00
Metre
906.00
592 Supplying and fixing new wooden fillets
wherever necessary:
a) 2nd class teak wood fillets 1.00 m 34.65 One Running
Metre
35.00
b) Hollock wood fillets. 1.00 m 29.30 One Running
Metre
29.00
593 Renewal of old putty of glass panes (length) 1.00 m 21.20 One Running
Metre
21.00
594 Refixing old glass panes with putty and nails 1.00 Sqm 275.30 One Square
Metre
275.00
595 Fixing old glass panes with wooden fillets
(excluding cost of fillets)
Metre
240.00
596 Providing and fixing 16 mm M.S. Fan clamps of
standard shape and size in existing R.C.C. slab
including cutting chase, anchoring clamp to
reinforcement bar, including cleaning, refilling,
making good the chase with matching concrete,
plastering and painting the exposed portion of
the clamps complete.
1.00 No. 228.00 Each 228.00
597 Regrading terracing of mud phaska covered
with tiles or brick, in cement by dismantling
tiles or bricks, removing mud plaster, preparing
the surface of mud phaska to proper slope,
relaying mud plaster gobri leaping and tiles or
bricks, grouted in cement mortar 1:3 (1 cement
: 3 fine sand)including replacing unserviceable
tiles or bricks with new ones and disposal of
unserviceable material to the dumping ground
(the cost of the new tiles or brick excluded)
within 50 metres lead.
Metre
253.00
598 Replacing sand stone slabs in roofing, laid in
including necessary repairs and cement pointing
with same mortar complete including disposal
of rubbish to dumping ground within 50 metres
of lead :
a) Red/ white sand stone slabs 30 to 50 mm thick. 1.00 Sqm 527.30 One Square
Metre
527.00
599 Renewing wooden battens in roofs, including
making good the holes in wall and painting with
oil type wood preservative of approved brand
and manufacture complete including removal of
rubbish to the dumping ground within 50
metres lead :
a) Sal wood battens. 1.00 Cum 66229.65 One Cubic
Metre
66230.00
600 Renewing wooden beams in roofs including
making good the holes in walls and painting
with oil type wood preservative of approved
brand and manufacture complete including
removal of rubbish to the dumping ground
within 50 metres lead :
a) Not exceeding 4.00 metres in length.
(i) Sal wood beams 1.00 Cum 68477.60 One Cubic
Metre
68478.00
(ii) Hollock wood beams 1.00 Cum 45139.40 One Cubic
Metre
45139.00
b) Above 4.00 metres and upto 5.00 metres
length.
(i) Sal wood beams 1.00 Cum 69428.80 One Cubic
Metre
69429.00
(ii) Hollock wood beams 1.00 Cum 46065.20 One Cubic
Metre
46065.00
601 Raking out joints in lime or cement mortar and
preparing the surface for re-pointing or
replastering including disposal of rubbish to the
dumping ground within 50 metres lead.
Metre
24.00
602 Flush pointing with cement mortar 1:3 (1
cement : 3 fine sand) mixed with 2% of integral
water proofing compound by weight of cement
for flat tile bricks on top of mud phaska :
a) With F.P.S. brick tiles 1.00 Sqm 52.20 One Square
Metre
52.00
b) With modular brick tiles 1.00 Sqm 53.20 One Square
Metre
53.00
603 Taking out wind ties from roof including cutting
out rusted bolts, nuts etc. and removing
materials to any distance within compound and
stacking.
604 Fixing of old wind tie with new fittings including
painting two or more coats with anticorrosive
bitumastic paint of approved brand &
manufacturer over and including priming coat
of ready mixed zinc chromate yellow primer of
approved brand.
Metre
68.00
605 Renewing bottom rail and/or top runner of
collapsible gate including making good all
damages and applying priming coat of zinc
chromate yellow primer of approved brand and
manufacturer.
1.00 Kg 139.75 One Kilogram 140.00
606 Renewing Wrought iron or M.S. Wheel or roller
of steel door or gate and fitting and fixing the
same with necessary clamps, nuts and
bolts/welding and erection etc. complete.
a) Wheel 50 mm dia. and below. 1.00 wheel 121.45 Per Wheel 121.00
b) Wheel above 50 mm dia. 1.00 wheel 185.65 Per Wheel 186.00
607 Pumping out water caused by springs, tidal or
river seepage, broken water mains or drains
and the like.
1.00 kLtr 85.20 One Kilo Litre 85.00
608 Mud mortar made with local clay good earth. 1.00 Cum 366.20 One Cubic
Metre
366.00
609 Brick work with common burnt clay bricks of
class designation 7.5 in mud mortar
Metre
3893.00
610 Providing and fixing 25 mm thick shutters for
cup board etc. :
a) Panelled or panelled & glazed shutters :
(i) Superior class teak wood including nickel plated
bright finished M.S. piano hinges with necessary
screws.
Metre
3355.00
(ii) Ist class teak wood including nickel plated
screws.
Metre
2817.00
b) Glazed shutters :
(i) Superior class teak wood including nickel plated
screws.
Metre
3463.00
(ii) Ist class teak wood including nickel plated
screws.
Metre
2884.00
611 Providing and fixing plain jaffri door and
window shutters including bright or/and black
enamelled M.S. butt hinges with necessary
screws 35x10mmlaths placed 35mm apart
(frames to be paid separately) including
fixing50x12mm beading complete with
a) Second class teak wood. 1.00 Sqm 2858.65 One Square
Metre
2859.00
612 Providing and fixing curtain rods of 1.25mm
thick brass plates with two brass brackets fixed
with brass screws and wooden plugs etc.
wherever necessary complete.
a) 20 mm diameter. 1.00 m 210.50 One Running
Metre
211.00
b) 25 mm diameter. 1.00 m 233.75 One Running
Metre
234.00
613 Providing and fixing M.S. round or square bars
with M.S. flats at required spacing in wooden
frames of windows and clerestory windows.
614 Providing joists (karries) including hoisting,
fixing in position and applying wood
preservative on unexposed surface etc.
complete with:
a) Sal wood. 1.00 Cum 65522.00 One Cubic
Metre
65522.00
b) Hollock wood. 1.00 Cum 42419.80 One Cubic
Metre
42420.00
615 Providing and fixing bright finished brass single
acting spring hinges with necessary brass
a) 150 mm 1.00 No. 405.45 Each 405.00
b) 125 mm 1.00 No. 359.00 Each 359.00
c) 100 mm 1.00 No. 239.15 Each 239.00
616 Providing and fixing bright finished brass double
acting spring hinges with necessary brass
a) 150 mm 1.00 No. 626.15 Each 626.00
b) 125 mm 1.00 No. 475.15 Each 475.00
c) 100 mm 1.00 No. 413.35 Each 413.00
617 Providing and fixing bright finished brass flush
bolts with necessary brass screws etc. complete
:
a) 250 mm 1.00 No. 190.70 Each 191.00
b) 150 mm 1.00 No. 165.90 Each 166.00
c) 100 mm 1.00 No. 119.45 Each 119.00
618 Providing and fixing 150 mm bright finished
floor brass door stopper with rubber cushion,
necessary brass screws etc. to suit shutter
thickness complete
1.00 No. 210.35 Each 210.00
619 Providing and fixing bright finished brass hard
drawn hooks and eyes :
a) 300 mm 1.00 No. 90.05 Each 90.00
b) 250 mm 1.00 No. 84.20 Each 84.00
c) 200 mm 1.00 No. 77.85 Each 78.00
d) 150 mm 1.00 No. 74.95 Each 75.00
e) 100 mm 1.00 No. 63.90 Each 64.00
620 Providing and fixing bright finished brass fan
light pivot with necessary brass screws etc.
complete.
1.00 No. 34.40 Each 34.00
621 Providing and fixing 300 mm long bright
finished brass chain with hook for fan light
including necessary brass screws etc. complete.
1.00 No. 55.60 Each 56.00
quadrant stay 300mm long with necessary brass
1.00 No. 154.35 Each 154.00
623 Providing and fixing bright finished brass helical
door spring (superior quality).
1.00 No. 397.95 Each 398.00
624 Providing and fixing chromium plated brass butt
hinges with necessary chromium plated brass
a) 125x70x4 mm (ordinary type) 1.00 No. 137.15 Each 137.00
b) 100x70x4 mm (ordinary type) 1.00 No. 110.45 Each 110.00
c) 75x65x4 mm (heavy type) 1.00 No. 137.15 Each 137.00
d) 75x40x2.5 mm (ordinary type) 1.00 No. 74.45 Each 74.00
e) 50x40x2.5 mm (ordinary type) 1.00 No. 31.70 Each 32.00
625 Providing and fixing 85x42mm chromium plated
brass pull bolt lock with necessary chromium
plated brass screws, nuts, bolts and washers
etc. complete.
1.00 No. 203.40 Each 203.00
626 White washing with lime to give an even shade :
a) Old work (two or more coats) 1.00 Sqm 8.55 One Square
Metre
9.00
b) Old work (one or more coats) 1.00 Sqm 5.30 One Square
Metre
5.00
627 Removing white or colour wash by scrapping
and sand papering and preparing the surface
smooth including necessary repairs to scratches
etc. complete
Metre
7.00
628 Distempering with dry distemper of approved
brand and manufacture (one or more coats)
and of required shade on old work to give an
even shade.
Metre
26.00
629 Distempering with oil bound washable
distemper of approved brand and manufacture
to give an even shade :
a) Old work (one or more coats) 1.00 Sqm 28.55 One Square
Metre
29.00
630 Removing dry or oil bound distemper, water
proofing cement paint and the like by
scrapping, sand papering and preparing the
surface smooth including necessary repairs to
scratches etc. complete.
Metre
9.00
631 Painting on G.S. sheet with synthetic enamel
paint of approved brand and manufacture of
required colour to give an even shade :
Metre
37.00
brand and manufacture over and including a
priming coat of ready mixed zinc chromate
yellow primer on new work :
Metre
23.00
633 Painting (one or more coats) on rain water, soil,
brand and manufacture on old work :
Metre
11.00
Metre
15.00
c) 150 mm diameter pipes 1.00 m 20.95 One Running
Metre
21.00
waste and vent pipes and fittings with
aluminium paint of approved brand and
manufacture over a priming coat of ready
mixed zinc chromate yellow primer on new
work :
Metre
24.00
Metre
34.00
Metre
51.00
635 Painting (one or more coats) on rain water, soil,
waste and vent pipes and fittings with synthetic
enamel paint of approved brand and
manufacture and required colour on old work :
Metre
12.00
Metre
15.00
Metre
22.00
636 Painting with oil type wood preservative of
approved brand and manufacture :
Metre
17.00
637 Wall painting with plastic emulsion paint of
even shade :
a) One or more coats on old work. 1.00 Sqm 46.85 One Square
Metre
47.00
colour to give an even shade :
Metre
41.00
639 Painting with aluminium paint of approved
brand and manufacture to give an even shade :
Metre
38.00
640 Painting with acid proof paint of approved
brand and manufacture of required colour to
Metre
43.00
641 Painting with black anti-corrosive bitumastic
Metre
36.00
642 French spirit polishing :
Metre
89.00
643 Polishing on wood work with ready made wax
polish of approved brand and manufacture :
a) Old work 1.00 Sqm 38.15 One Square
Metre
38.00
644 Re-lettering with black Japan paint of approved
brand and manufacture.
1.00 units 1.40 per letter per
cem height
1.00
645 Painting (one or more coats) with black Japan
give an even shade.
Metre
39.00
646 Providing and fixing C.P. brass chain and rubber
plug complete for sink or wash basin :
a) 32 mm dia 1.00 No. 62.40 Each 62.00
b) 40 mm dia 1.00 No. 62.40 Each 62.00
647 Distempering with 1st quality acrylic washable
distemper (ready made) of approved
manufacturer and of required shade and colour
complete. as per manufacturer's specification.
Metre
26.00
648 Finishing walls with water proofing cement
a) Old work (one or more coats applied @ 2.20
kg/10 sqm) over priming coat of primer applied
@ 0.80 litrs/10 sqm complete including cost of
Priming coat.
Metre
51.00
b) Old work (one or more coats @ 2.20 kg/10 sqm)
complete.
Metre
35.00
649 Finishing walls with textured exterior paint of
required shade :
a) Old work (Two or more coats on existing
cement paint surface applied @ 3.28 ltr/10
sqm.
Metre
107.00
b) Old work (One or more coats) applied @ 1.82
ltr/10 sqm.
Metre
65.00
650 Finishing walls with Acrylic Smooth exterior
a) Old work (Two or more coat applied @1.67 ltr/
10 sqm) on existing cement paint surface).
Metre
57.00
b) Old work (One or more coat applied @ 0.90
ltr/10 sqm).
Metre
37.00
651 Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
shade
a) Old work (Two or more coats applied @ 1.43
ltr/ 10 sqm) over existing cement paint surface.
Metre
69.00
b) Old work (one or more coats applied @ 0.83
ltr/10 sqm).
Metre
46.00
652 Varnishing with varnish of approved brand and
manufacture:
a) One or more coats with copal varnish. 1.00 Sqm 39.90 One Square
Metre
40.00
b) One or more coats with spar varnish. 1.00 Sqm 40.40 One Square
Metre
40.00
653 Melamine polishing on wood work (one or
more coat).
Metre
74.00
654 Varnishing with flatting varnish of approved
brand and manufacture one or more coats on
old work.
Metre
39.00
655 Providing and fixing double scaffolding system
(cup lock type) on the exterior side, up to seven
story height made with 40mm dia. M.S. tube
1.5m centre to centre horizontal & vertical
tubes joining with cup & lock system with M.S.
tubes, M.S. tube challies, M.S. clamps and M.S.
staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable
condition for the required duration as approved
and removing it there after .The scaffolding
system shall be stiffened with bracings, runners,
connection with the building etc wherever
required for inspection of work at required
locations with essential safety features for the
workmen etc. complete as per directions and
approval of Engineer-in-charge .The elevational
area of the scaffolding shall be measured for
payment purpose .The payment will be made
once irrespective of duration of scaffolding.
Metre
149.00
casement window fasteners or peg stays to
windows/ ventilators with necessary welding
and machine screws etc. complete.
1.00 Kg 417.95 One Kilogram 418.00
657 Providing and fixing 14 mmbright finished brass
spring catch to steel centre hung ventilators
with necessary welding and machine screws
etc. complete.
1.00 No. 45.85 Each 46.00
440383.00 Total of the Sub-Head - Repairs To Buildings :
Sub-Head : Dismantling and Demolishing
658 Demolishing lime concrete manually/ by
mechanical means and disposal of material
within 50 metres lead as per direction of
Engineer-in - charge.
Metre
281.00
659 Demolishing cement concrete manually/ by
mechanical means including disposal of
material within 50 metres lead as per direction
of Engineer - in - charge.
a) Nominal concrete 1:3:6 or richer mix (i/c
equivalent design mix)
Metre
806.00
b) Nominal concrete 1:4:8 or leaner mix (i/c
equivalent design mix)
Metre
497.00
660 Demolishing R.C.C. work manually/ by
mechanical means including stacking of steel
bars and disposal of unserviceable material
within 50 metres lead as per direction of
Engineer - in- charge.
Metre
1176.00
661 Demolishing R.B. work manually/ by mechanical
means including stacking of steel bars and
disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-
charge.
Metre
1051.00
662 Extra for cutting reinforcement bars manually/
by mechanical means in R.C.C. or R.B. work
(Payment shall be made on the cross sectional
area of R.C.C. or R.B. work) as per direction of
Engineer - in -charge.
Metre
409.00
663 Extra for scrapping, cleaning and straightening
reinforcement from R.C.C. or R.B. work
664 Demolishing brick work manually/ by
mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres lead as
a) In mud mortar 1.00 Cum 233.20 One Cubic
Metre
233.00
b) In lime mortar with old mughal bricks 1.00 Cum 588.50 One Cubic
Metre
589.00
c) In lime mortar 1.00 Cum 281.45 One Cubic
Metre
281.00
d) In cement mortar 1.00 Cum 681.00 One Cubic
Metre
681.00
665 Removing mortar from bricks and cleaning
bricks including stacking within a lead of 50 m
(stacks of cleaned bricks shall be measured) :
a) From brick work in mud mortar 1000.00 Units 1551.15 1000 nos 1551.00
b) From brick work in lime mortar 1000.00 Units 1802.00 1000 nos 1802.00
c) From brick work in cement mortar 1000.00 Units 2260.65 1000 nos 2261.00
666 Demolishing stone rubble masonry manually/
by mechanical means including stacking of
serviceable material and disposal of
per direction of Engineer-in-charge:
a) In lime mortar 1.00 Cum 383.30 One Cubic
Metre
383.00
b) In cement mortar 1.00 Cum 812.60 One Cubic
Metre
813.00
667 Dismantling dressed stone work ashlar face
stone work, marble work or precast concrete
work manually/ by mechanical means including
stacking of serviceable and disposal of
per direction of Engineer-in-charge:
Metre
485.00
Metre
951.00
668 Removing mortar from and cleaning stones and
concrete articles (net quantity of stacks of
cleaned materials will be measured) :
Metre
160.00
Metre
230.00
669 Dismantling doors, windows and clerestory
windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc. complete
and stacking within 50 metres lead :
a) Of area 3 sq. metres and below 1.00 No. 127.80 Each 128.00
b) Of area beyond 3 sq. metres 1.00 No. 175.50 Each 176.00
670 Taking out doors, windows and clerestory
window shutters (steel or wood) including
stacking within 50 metres lead:
a) Of area 3 sq. metres and below 1.00 No. 49.60 Each 50.00
b) Of area beyond 3 sq. metres 1.00 No. 65.65 Each 66.00
671 Dismantling wood work in frames, trusses,
purlins and rafters up to 10 metres span and 5
metres height including stacking the material
within50 metres lead:
a) Of sectional area 40 square centimetres and
above.
Metre
1555.00
b) Of sectional area below 40 square centimetres. 1.00 m 6.20 One Running
Metre
6.00
672 Extra for dismantling trusses, rafters, purlins
etc. of wood work for every additional span of
one metre or part thereof beyond 10 metres :
above.
1.00 units 213.80 Cum per
metre span
214.00
b) Of sectional area below 40 square centimetres. 1.00 units 0.60 Metre per
metre span
1.00
etc. of wood work for every additional height of
one metre or part thereof beyond 5 metres :
above.
1.00 units 303.75 Cum per
metre height
304.00
b) Of sectional area below 40 square centimetres. 1.00 units 1.20 Metre per
metre height
1.00
674 Dismantling steel work in single sections
including dismembering and stacking within 50
metres lead in:
a) R.S. Joists 1.00 Kg 1.15 One Kilogram 1.00
b) Channels, angles, tees and flats 1.00 Kg 0.80 One Kilogram 1.00
675 Dismantling steel work in built up sections in
angles, tees, flats and channels including all
gusset plates, bolts, nuts, cutting rivets, welding
etc. including dismembering and stacking within
50metres lead.
676 Dismantling steel work manually/ by
mechanical means in built up sections without
dismembering and stacking within 50 metres
lead as per direction of Engineer-in-charge.
etc. of steel work for every additional span of
one metre or part thereof beyond 10 metres
1.00 units 0.30 Kg per metre
span
0.00
etc. of steel work for every additional height of
one metre or part thereof beyond 5 metres.
1.00 units 0.30 Kg per metre
height
0.00
679 Extra for marking of structural steel work
required to be re-erected.
680 Dismantling tile work in floors and roofs laid in
cement mortar including stacking material
a) For thickness of tiles 10 mm to 25 mm 1.00 Sqm 25.55 One Square
Metre
26.00
b) For thickness of tiles above 25 mm and up to 40
mm
Metre
40.00
681 Demolishing dry brick pitching in floors, drains
etc. including stacking serviceable material and
disposal of unserviceable material within
50metres lead :
Metre
437.00
682 Dismantling stone slab flooring laid in cement
mortar including stacking of serviceable
material and disposal of unserviceable material
within 50metres lead.
Metre
89.00
683 Demolishing brick tile covering in terracing
including stacking of serviceable material and
50metres lead.
Metre
37.00
684 Demolishing mud phaska in terracing and
disposal of material within 50 metres lead.
Metre
302.00
685 Dismantling roofing including ridges, hips,
valleys and gutters etc., and stacking the
material within 50 metres lead of:
a) G.S. Sheet 1.00 Sqm 56.80 One Square
Metre
57.00
b) Asbestos sheet 1.00 Sqm 26.70 One Square
Metre
27.00
686 Dismantling stone slab roofing over wooden
karries or R.C.C. battens (dismantling karries
and battens to be paid for separately) including
stacking of serviceable material and disposal of
unserviceable material within 50 metres lead.
Metre
885.00
687 Dismantling jack arch roofing and floors
50metres lead.
Metre
84.00
688 Dismantling tiled roofing with battens, boarding
etc. complete including stacking of serviceable
material and disposal of unserviceable material
Metre
70.00
689 Demolishing thatch roofing including mats,
bamboo, jaffari etc. complete including stacking
of serviceable material and disposal of
unserviceable material within 50 metres lead.
Metre
19.00
690 Dismantling wooden ballies in posts and struts
including stacking within 50 metres lead.
Metre
7.00
691 Dismantling and stacking within 50 metres lead,
fencing posts or struts including all earth work
and dismantling of concrete etc. in base of :
a) T or L iron or pipe 1.00 No. 89.80 Each 90.00
b) R.C.C. 1.00 No. 102.40 Each 102.00
692 Cutting ballies or wooden posts of fencing at
the point of projection above the concrete or
ground and stacking the same within 50 metres
lead.
1.00 No. 8.20 Each 8.00
693 Dismantling barbed wire or flexible wire rope in
fencing including making rolls and stacking
694 Dismantling wooden trellis work excluding
frames but including stacking the serviceable
material within 50 metres lead.
Metre
22.00
695 Dismantling expanded metal or I.R.C. fabrics
with necessary battens and beading including
stacking the serviceable material within
50metres lead.
Metre
26.00
696 Dismantling wooden boardings in lining of walls
and partitions, excluding supporting members
but including stacking within 50 metres lead :
a) Up to 10 mm thick 1.00 Sqm 21.15 One Square
Metre
21.00
b) Thickness above 10 mm up to 25 mm 1.00 Sqm 26.95 One Square
Metre
27.00
c) Thickness above 25 mm up to 40 mm 1.00 Sqm 31.75 One Square
Metre
32.00
697 Dismantling precast concrete or stone slabs in
walls, partition walls etc. including stacking
within 50 metres lead:
a) Thickness up to 40 mm 1.00 Sqm 97.25 One Square
Metre
97.00
b) Thickness above 40 mm up to 75 mm 1.00 Sqm 145.65 One Square
Metre
146.00
698 Dismantling cement asbestos or other hard
board ceiling or partition walls including
stacking of serviceable materials and disposal of
unserviceable materials within 50 metres lead.
Metre
20.00
699 Dismantling C.I. or asbestos rain water pipe
with fittings and clamps including stacking the
material within 50 metres lead :
a) 75 to 80 mm dia pipe. 1.00 m 25.00 One Running
Metre
25.00
b) 100 mm dia pipe 1.00 m 25.85 One Running
Metre
26.00
c) 150 mm dia pipe 1.00 m 26.65 One Running
Metre
27.00
700 Dismantling manually/ by mechanical means
disposal of unserviceable material
within50metres lead as per direction of
Engineer-in-charge :
a) Water bound macadam road 1.00 Sqm 73.90 One Square
Metre
74.00
b) Bituminous road 1.00 Sqm 143.90 One Square
Metre
144.00
701 Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking
out the pipes, manually/ by mechanical means
including stacking of pipes within 50 metres
lead as per direction of Engineer-in-charge :
a) 15 mm to 40 mm nominal bore 1.00 m 52.60 One Running
Metre
53.00
b) Above 40 mm nominal bore 1.00 m 59.70 One Running
Metre
60.00
702 Dismantling C.I. pipes including excavation and
refilling trenches after taking out the pipes,
manually/ by mechanical means breaking lead
caulked joints, melting of lead and making into
blocks including stacking of pipes & lead at site
within 50 metre lead as per direction of
Engineer-in-charge:
a) Up to 150 mm diameter 1.00 m 155.20 One Running
Metre
155.00
b) Above 150 mm dia up to 300 mm dia. 1.00 m 205.15 One Running
Metre
205.00
c) Above 300 mm diameter 1.00 m 265.75 One Running
Metre
266.00
703 Dismantling steel cylinder R.C. pipes including
excavation and refilling trenches after taking
out the pipes, manually/ by mechanical means
breaking lead caulked joints, melting of lead
and making into blocks including stacking of
pipes & lead at site within 50 metres lead as per
direction of Engineer-in-charge:
Metre
247.00
b) Above 600 mm diameter 1.00 m 618.85 One Running
Metre
619.00
704 Dismantling asbestos cement pressure pipes
including excavation and refilling trenches after
taking out the pipes manually/ by mechanical
means and stacking the pipes within 50 metres
lead as per direction of Engineer-in-charge:
Metre
110.00
b) Above 150 mm diameter 1.00 m 133.10 One Running
Metre
133.00
705 Taking out C.I. cover with frame from R.C.C. top
slab of manholes of various sizes including
demolishing of R.C.C. work manually/ by
mechanical means and stacking of useful
materials near the site and disposal of
unserviceable materials within 50 metres lead
1.00 No. 237.45 Each 237.00
706 Taking out C.I. cover with frame from R.C.C. top
slab of inspection chambers of various sizes
including demolishing of R.C.C. work manually/
by mechanical means and stacking of useful
materials near the site and disposal of
unserviceable materials within 50 metres lead
1.00 No. 139.45 Each 139.00
707 Dismantling of R.C.C. spun vent shaft including
excavating the cement concrete pit completely,
taking out the shaft, refilling the excavated gap,
stacking the useful materials near the site and
disposal of unserviceable materials within 50
metres lead.
1.00 No. 1590.75 Each 1591.00
708 Dismantling of road gully chamber of various
sizes including C.I. grating with frame including
stacking of useful materials near the site and
disposal of unserviceable materials within
50metres lead including refilling the excavated
gap.
1.00 No. 323.45 Each 323.00
709 Dismantling of flushing cistern of all types
(C.I./PVC/Vitrious China) including stacking of
useful materials near the site and disposal of
unserviceable materials within 50 metres lead.
1.00 No. 322.00 Each 322.00
710 Dismantling of C.I. sluice valve including
stacking of useful materials within a lead of 50
metres
a) Up to 150 mm diameter 1.00 No. 117.05 Each 117.00
b) Above 150 mm diameter 1.00 No. 412.60 Each 413.00
711 Dismantling of spindle fire hydrant including
stacking of useful materials within 50 metres
lead.
1.00 No. 248.40 Each 248.00
712 Dismantling of cement concrete platform along
with curtain walls and base concrete etc.
including stacking of useful materials near the
site and disposal of unserviceable materials
within 50 metres lead :
a) 120 x 120 cm (outside to outside) 1.00 No. 365.05 Each 365.00
b) 210 x 120 cm (outside to outside) 1.00 No. 560.00 Each 560.00
c) 320 x 120 cm (outside to outside) 1.00 No. 792.40 Each 792.00
713 Dismantling old plaster or skirting raking out
joints and cleaning the surface for plaster
including disposal of rubbish to the dumping
ground within 50 metres lead.
Metre
18.00
714 Dismantling aluminium/ Gypsum partitions,
doors, windows, fixed glazing and false ceiling
including disposal of unserviceable surplus
material and stacking of serviceable material
with in 50 meters lead as directed by Engineer-
in-charge.
Metre
20.00
715 Demolishing R.C.C. work by mechanical means
and stockpiling at designated locations and
disposal of dismantled materials up to a lead of
1 kilometre, stacking serviceable and
unserviceable material separately including
cutting reinforcement bars.
Metre
1265.00
716 Dismantling of flexible pavement (bituminous
courses) by mechanical means and disposal of
dismantled material up to a lead of 1 kilometre,
Metre
193.00
717 Disposal of building rubbish / malba / similar
unserviceable, dismantled or waste materials by
mechanical means including loading,
transporting, unloading to approved municipal
dumping ground or as approved by Engineer-in-
charge, beyond 50 m initial lead, for all loads
including all lifts involved.
Metre
124.00
28705.00 Total of the Sub-Head - Dismantling And Demolishing :
Sub-Head : Road Work
718 Preparation and consolidation of sub grade with
power road roller of 8 to 12 tonne capacity
after excavating earth to an average of 22.5 cm.
depth, dressing to camber and consolidating
with road roller including making good the
undulations etc. and re-rolling the sub grade
and disposal of surplus earth with lead upto 50
metres.
Metre
74.00
719 Extra for compaction of earth work in
embankment under optimum moisture
conditions to give at least 95% of the maximum
dry density (proctor density).
Metre
9.00
720 Supplying and stacking at site.
a) 90 mm to 45 mm size stone aggregate. 1.00 Cum 1121.90 One Cubic
Metre
1122.00
b) 63 mm to 45 mm size stone aggregate. 1.00 Cum 1272.90 One Cubic
Metre
1273.00
c) 53 mm to 22.4 mm size stone aggregate. 1.00 Cum 1296.15 One Cubic
Metre
1296.00
d) Over burnt (Jhama) brick aggregate 120 mm to
40 mm.
Metre
576.00
e) Over burnt (Jhama) brick aggregate 90 mm to
45 mm.
Metre
599.00
f) Stone screening 13.2 mm nominal size (Type A). 1.00 Cum 1410.20 One Cubic
Metre
1410.00
g) Stone screening 11.2 mm nominal size (Type B). 1.00 Cum 1453.80 One Cubic
Metre
1454.00
h) Red bajri 1.00 Cum 1285.35 One Cubic
Metre
1285.00
i) Good earth. 1.00 Cum 308.25 One Cubic
Metre
308.00
j) Moorum. 1.00 Cum 646.55 One Cubic
Metre
647.00
721 Laying, spreading and compacting stone
aggregate of specified sizes to WBM
specifications in uniform thickness, hand
picking, rolling with 3 wheeled road / vibratory
roller 8-10 tonne capacity in stages to proper
grade and camber, applying and brooming
requisite type of screening / binding material to
fill up interstices of coarse aggregate, watering
and compacting to the required density
Metre
389.00
722 Laying water bound macadam sub-base with
brick aggregate and blinding material, earth etc.
including screening, sorting and spreading to
template and consolidation with light power
road-roller etc. complete.(payment for brick
aggregate and moorum etc. to be made
separately)
a) Over burnt (Jhama) brick aggregate 120 mm to
40 mm.
Metre
298.00
b) Over burnt (Jhama) brick aggregate 90 mm to
45 mm.
Metre
298.00
723 Supplying, stacking and Spreading 6 mm thick
red bajri, watering and rolling complete
including preparation of the surface and rolling.
a) With road roller/ hand roller. 1.00 Sqm 13.35 One Square
Metre
13.00
724 Brick edging in full brick width and half brick
depth including excavation, refilling and
disposal of surplus earth lead upto 50 metres.
Metre
127.00
725 Brick edging laid lengthwise with half brick
depth including excavation, refilling and
disposal of surplus earth lead upto 50 metres :
Metre
36.00
726 Scarifying metalled (water-bound) road surface
including disposal of rubbish, lead upto 50m
and consolidation of the aggregate received
from scarifying with power road roller of 8 to 10
tonne capacity.
Metre
13.00
727 Making bajri path including preparation of sub
grade, supplying and laying brick aggregate of
50mm nominal size 7.5 cm deep with blinding
material consisting of 12 mm moorum and 12
mm red bajri consolidated with road roller.
Metre
115.00
728 Dry stone pitching 22.5 cm thick including
supply of stones and preparing surface
complete.
Metre
399.00
729 Dry brick pitching half brick thick in drains
including supply of bricks and preparing the
surface complete :
Metre
453.00
730 Cutting road and making good the same
including supply of extra quantities of materials
i.e. aggregate, moorum screening, red bajri and
labour required.
a) bituminous portion 1.00 Cum 2151.60 One Cubic
Metre
2152.00
b) Water bound macadam. 1.00 Cum 1166.60 One Cubic
Metre
1167.00
731 Cutting bajri paths and making good the same
including supply of extra quantities of brick
aggregate, moorum and red bajri required.
Metre
108.00
732 Supplying at site :
a) R.C.C. Standards post/ struts/rails/ pales of mix
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded
stone aggregate 12.5 mm nominal size) with
wooden plugs or 6mm bar nibs wherever
required as per direction of Engineer-in-charge
(cost of earthworks in excavation, concrete
works in foundation to be paid separately).
Metre
19081.00
b) Welded steel wire fabric of required width
having rectangular mesh painted with two or
more coats of enamel paint of approved shade
over a coat of primer (Priming & Painting to be
733 Supplying and fixing turn buckles and straining
bolts for barbed wire fencing.
1.00 sets 148.35 Each set 148.00
734 Fencing with R.C.C. post placed at required
distance, embedded in cement concrete blocks,
every 15th post, last but one end post and
corner post shall be strutted on both sides and
end post one side only, provided with
horizontal lines and two diagonals of barbed
wire weighing 9.38 kg per 100metres
(minimum), between the two posts fitted and
fixed with G.I. staples on wooden plugs or G.I.
binding wire tied to 6 mm bar nibs fixed while
casting the post (cost of R.C.C. posts, struts,
earth work and concrete to be paid for
separately) :- Payment to be made per metre
cost of total length of barbed wire used.
a) With G.I. barbed wire 1.00 m 8.15 One Running
Metre
8.00
735 Fencing with angle iron post placed at required
distance embedded in cement concrete blocks,
every 15th post, last but one end post and
corner post shall be strutted on both sides and
end post on one side only and provided with
horizontal lines and two diagonals interwoven
with horizontal wires, of barbed wire weighing
9.38 kg per 100 m (minimum), between the two
posts fitted and fixed with G.I. staples, turn
buckles etc. complete. (Cost of posts, struts,
earth work and concrete work to be paid for
separately) :-Payment to be made per metre
cost of total length of barbed wire used.
a) With G.I. barbed wire 1.00 m 12.50 One Running
Metre
13.00
736 Supplying at site Angle iron post & strut of
required size including bottom to be split and
bent at right angle in opposite direction for 10
cm length and drilling holes upto 10 mm dia.
etc. complete.
737 Welded steel wire fabric fencing with posts of
specified material and of standard design
placed and embedded in cement concrete
blocks45x45x60cm of mix 1:5:10 (1 cement:5
fine sand : 10 graded stone aggregate 40mm
nominal size), every 15th post, last but one end
post and corner post shall be strutted on both
sides and end post on one side only and struts
embedded in cement concrete blocks
70x45x50cm of the same mix, provided with
welded steel wire fabric fixed between the
posts fitted and fixed with G.I. staples on
wooden plugs or tied to 6 mm bar nibs with G.I.
binding wire (cost of posts, welded steel wire
fabric, painting, earth work in excavation and
concrete to be paid for separately) :
Metre
26.00
738 Engraving letters in hard stone 1.00 units 3.90 per cm height
per letter
4.00
739 Providing and fixing 15x15x90cm boundary
stone of hard stone with top 30 cm chisel
dressed on all four sides including top (cost of
excavation, refilling and concrete etc. to be paid
for separately).
1.00 No. 119.30 Each 119.00
740 Providing and fixing 15cm dia at top, 20cm at
bottom and 90cm high precast reinforced
cement concrete 1:1.5:3 (1 cement : 1.5 coarse
size) boundary stone as per standard design
including finishing smooth with cement mortar
1:3 (1 cement : 3 fine sand)(cost of excavation,
refilling and concreting to be paid for
separately).
1.00 No. 427.75 Each 428.00
741 Providing and fixing precast reinforced cement
concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3
graded stone aggregate 20mm nominal size)
kilometre stone as per standard design
including finishing smooth in 1:3 cement
mortar(1 cement : 3 fine sand) but excluding
the cost of earth work, concrete in foundation,
painting and lettering etc. which shall be paid
for separately.
a) 35x111x25 cm size. 1.00 No. 1632.85 Each 1633.00
b) 50x152.5x25 cm size. 1.00 No. 3000.15 Each 3000.00
c) 35x93.5x18 cm size. 1.00 No. 1097.30 Each 1097.00
742 Surface dressing on new surface with paving
bitumen of grade VG -10 of approved quality
using 2.25 kg of bitumen per sqmwith 1.65 cum
of stone chippings 13.2 mm nominal size per
100 sqm of road surface including consolidation
with road roller of 6 to 8 tonne capacity etc.
complete:
Metre
160.00
743 Surface dressing on new surface in two coats
with bitumen of grade VG -10 of approved
quality using 1.8kg.of bitumen per sqm with
1.5cum of stone chippings 13.2mm nominal size
per 100 sqm of road surface for first coat
and1.1kg. of bitumen per sqm. with 1.00 cu.
metre of stone chippings 11.2mmnominal size
per 100 sqm. of road surface for second coat
including consolidation of each coat separately
with road roller of 6 to 8 tonne capacity etc.,
complete.
Metre
216.00
744 Surface dressing on old surface with hot
bitumen of grade VG - 10 of approved quality
using 1.95 kg of bitumen per sqm. with 1.50
cum of stone chippings 11.2 mm nominal size
per 100 sqm of road surface including
consolidation with road roller of 6 to 8 tonne
capacity, etc. complete.
Metre
131.00
745 Surface dressing one coat on new surface with
bitumen of specified grade at a rate of 1.95
kg/sqm. of surface area with 1.5 cum. of stone
chippings 13.2mm nominal size per 100 sqm. of
road surface including consolidation with road
roller of 6 to 8 tonne capacity , etc. complete :
a) Using bitumen emulsion (minimum 50%
bitumen content - RS grade conforming to IS :
8887).
Metre
116.00
746 Surface dressing one coat on old surface with
bitumen of specified grade at the rate of 1.22
kg/ sqm of surface area with 1.10 cum of stone
chippings11.2 mm nominal size per 100 sqm. of
road surface including consolidation with road
roller of 6 to 8 tonne capacity etc. complete :
a) Using bitumen emulsion (minimum 50%
bitumen content - RS grade conforming to IS :
8887).
Metre
74.00
747 Providing and applying tack coat using hot
straight run bitumen of grade VG - 10 including
heating the bitumen, spraying the bitumen with
mechanically operated spraying unit fitted on
bitumen boiler, cleaning and preparing
theexisting road surface as per specifications :
a) On W.B.M. @ 0.75 Kg / sqm. 1.00 Sqm 43.65 One Square
Metre
44.00
b) On bituminous surface @ 0.50 Kg / sqm. 1.00 Sqm 31.75 One Square
Metre
32.00
748 Providing and applying tack coat using bitumen
emulsion conforming to IS: 8887, using
emulsion pressure distributer including
preparing the surface & cleaning with
mechanical broom.
a) With rapid setting bitumen emulsion.
(i) On W.B.M / W.M.M. @ 0.4kg/sqm. 1.00 Sqm 15.25 One Square
Metre
15.00
(ii) On bituminous surface @ 0.25kg/sqm. 1.00 Sqm 10.05 One Square
Metre
10.00
b) With medium setting bitumen emulsion.
(i) On W.B.M / W.M.M. @ 0.4kg/sqm. 1.00 Sqm 15.35 One Square
Metre
15.00
(ii) On bituminous surface @ 0.25kg/sqm. 1.00 Sqm 10.10 One Square
Metre
10.00
749 2 cm premix carpet surfacing with 1.8 cum and
0.90 cum of stone chippings of 13.2 mm size
and 11.2 mm size respectively per 100 sqm. and
52 kg. and 56 kg. of hot bitumen per cum of
stone chippings of 13.2 mm and 11.2 mm size
respectively including a tack coat with hot
straight run bitumen including consolidation
complete: (tack coat to be paid for separately).
a) With paving Asphalt grade VG - 10 heated and
then mixed with solvent at the rate of 70 grams
per kg of asphalt.
Metre
147.00
b) With paving Asphalt grade VG - 30 with no
solvent
Metre
146.00
c) With Refinery Modified Bitumen CRMB 55
conforming to IRC: SP: 53.
Metre
149.00
750 2.5 cm premix carpet surfacing with 2.25 cum
and 1.12 cumof stone chippings of 13.2mmand
11.2mm size respectively per 100 sqm. and 52
kg. and 56 kg. of hot bitumen per cum of stone
chippings of 13.2 mm and 11.2mm size
respectively including a tack coat with hot
straight run bitumen including consolidation
complete.(tack coat to be paid for separately) :
per kg of asphalt.
Metre
180.00
b) With paving Asphalt grade VG - 30 with no
solvent
Metre
178.00
conforming to IRC: SP: 53.
Metre
181.00
751 2 cm premix carpet surfacing with 2.4cum of
stone chippings 11.2 mm nominal size per 100
sqm and bitumen emulsion (medium setting
min. 65% bitumen content) complying with IS :
8887 using 96kg per cum of chipping including
consolidation with road roller of 6 to 9 tonne
capacity etc. complete.
Metre
134.00
752 2.5 cm premix carpet surfacing with 3 cum of
stone chippings 10 mm nominal size per 100
sqm and bitumen emulsion (medium setting
min. 65% bitumen contents) complying with IS :
8887 using 96 kg per cum of chippings of road
surface including consolidation with road roller
etc complete .
Metre
162.00
753 Providing and laying Bitumen Penetration
Macadam with hard stone aggregate of quality,
size and grading as specified, with bitumen of
suitable penetration grade including required
key aggregate as specified, spreading coarse
aggregate with the help of self propelled /
tipper tail mounted aggregate spreader and
applying bitumen by a pressure distributor and
then spreading key aggregate with the help of
aggregate spreader complete including
consolidation with road roller of minimum 8 to
10 tonne capacity to achieve specified values of
compaction and surface accuracy :
a) For 50mm compacted thickness using coarse
aggregate of size 50-20 mm graded @0.60 cum
per 10 sqm key aggregate of size 12.5 mm
graded @ 0.15 cum per 10 sqm. With paving
asphalt grade VG - 10 @ 50 kg/10 sqm.
Metre
387.00
b) For 75 mm compacted thickness in two layers
using stone aggregate of size 63-41 mm graded
@ 0.90 cum per 10 sqm key aggregate of size
20.0 mm graded @ 0.18 cum per 10 sqm. With
paving asphalt grade VG - 10 @ 68 kg/10 sqm.
Metre
553.00
754 Providing and laying bitumen mastic wearing
course (as per specifications) with industrial
bitumen of grade 85/25 conforming to IS : 702
prepared by using mastic cooker and laid to
required level and slope including providing
antiskid surface with bitumen precoated fine
grained hard stone chipping of approved size at
the rate of 0.005 cum per 10 sqm and at
approximates spacing of 10cm centre to centre
in both directions, pressed into surface
protruding 1mm to 4mm over mastic surface,
including cleaning the surface, removal of
debris etc. all complete. ( Considering bitumen
using 10.2% as per MORTH specification .)
a) 25mm thick. 1.00 Sqm 811.95 One Square
Metre
812.00
Metre
1299.00
755 2.5 cm thick bitumastic sheet with hot bitumen
of approved quality using stone chippings (60%
with 12.5 mm nominal size and 40% with 10
mm nominal size) @1.65 cum per 100 sqm and
coarse sand @ 1.65 cum per 100 sqm of road
surface and with bitumen @ 56 kg/cum of
stone chippings and @128kg/cum. of sand over
a tack coat with hot straight run bitumen
including consolidation with road roller of 8 to
10 tonne etc. complete. (tack coat to be paid
separately) :
per kg of asphalt.
Metre
244.00
b) With paving Asphalt grade VG - 30. 1.00 Sqm 240.90 One Square
Metre
241.00
conforming to IRC: SP : 53.
Metre
247.00
756 4 cm thick bitumastic sheet with hot bitumen of
approved quality using stone chippings (60%
with 12.5mm nominal size and 40% with 10mm
nominal size) @2.60cum per 100 sqm and
coarse sand @ 2.60cum per 100 sqm of road
surface and with bitumen @ 56 kg/cum. of
stone chippings and at 128kg/cum of sand over
a tack coat with hot straight run bitumen
including consolidation with road roller of 8 to
10 tonne etc. complete. (tack coat to be paid
separately) :
per kg of asphalt.
Metre
374.00
b) With paving asphalt grade VG - 30 with no
solvent
Metre
370.00
conforming to IRC: SP : 53.
Metre
379.00
757 Providing and laying seal coat of premixed fine
aggregate ( passing 2.36 mm and retained on
180 micron sieve) with bitumen using 128 kg of
bitumen of grade VG - 10 bitumen per cum of
fine aggregate and 0.60 cum of fine aggregate
per 100 sqm of road surface including rolling
and finishing with road roller all complete.
Metre
66.00
758 Providing and laying seal coat over prepared
surface of road with bitumen heated in bitumen
boiler fitted with the spray set spraying using 98
kg of bitumen of grade VG - 10 and blinding
surface with 0.90cum of stone aggregate of 6.7
mm size (Passing 11.2mm sieve and retained on
2.36 mmsieve) per 100 sqm of road surface
including rolling and finishing with power road
roller all complete.
Metre
86.00
759 Cement concrete 1:2:4 (1 cement : 2 coarse
size) in pavements, laid to required slope and
camber in panels as required including
consolidation finishing and tamping complete.
Metre
4873.00
760 Providing and laying design mix cement
concrete of M-30 grade, in roads/ taxi tracks/
runways, using cement content as per design
mix, using coarse sand and graded stone
aggregate of 40 mm nominal size in appropriate
proportions as per approved & specified design
criteria, providing dowel bars with sleeve/ tie
bars wherever required, laying at site, spreading
and compacting, mechanically by using needle
and surface vibrators, levelling to required
slope/ camber, finishing with required texture,
including steel formwork with sturdy M.S.
channel sections, curing, making provision for
contraction/ expansion, construction &
longitudinal joints (10 mm wide x 50mm deep)
by groove cutting machine, providing and filling
joints with approved joint filler and sealants,
complete all as per direction of Engineer-in-
charge (Item of joint fillers, sealants, dowel bars
with sleeve/ tie bars to be paid separately)
(Note: Cement content considered in M-30 is @
340 kg/cum. Excess/ less cement used as per
design mix is payable/ recoverable separately.
a) Cement concrete prepared with batch mixing
machine.
Metre
6127.00
b) Cement concrete manufactured in automatic
batching plant (RMC plant) i/c transportation to
site in transit mixer.
Metre
6475.00
761 Annexure 'A' to Item number 16.43 1.00 Cum 212.30 One Cubic
Metre
212.00
762 Annexure 'B' to Item number 16.43 1.00 Cum 443.95 One Cubic
Metre
444.00
763 Extra for providing and mixing hardening
compound of approved quality as per
manufacturer's specification in cement
concrete.
1.00 Ltr 46.45 One Litre 46.00
764 Providing and fixing in position pre-moulded
joint filler in expansion joints.
1.00 units 2.45 Per cm depth
per cm width
per m length
2.00
765 Providing and laying in position bitumen hot
sealing compound for expansion joints etc.
a) Using grade A sealing compound. 1.00 units 1.90 Per cm depth
per cm width
per m length
2.00
766 Painting runway/taxi track/apron marking with
adequate nos. of coats to give uniform finish
with road marking paint of superior make as
approved by the Engineer-in-charge i/c cleaning
the surface of all dirt, scales, oil, grease and
other foreign material etc. and lining out
complete.
a) New work (Two or more coats) 1.00 Sqm 104.45 One Square
Metre
104.00
b) Old work (One or more coats) 1.00 Sqm 65.35 One Square
Metre
65.00
767 Painting road surface marking with adequate
no. of coats to give uniform finish with ready
mixed road marking paint conforming to IS :
164, on bituminous surface in white/yellow
shade including cleaning the surface of all dirt,
scales, oil, grease and foreign material etc.
complete.
a) New work (Two or more coats). 1.00 Sqm 112.75 One Square
Metre
113.00
b) Old work (One or more coats) 1.00 Sqm 73.40 One Square
Metre
73.00
768 Making bell mouth opening/ entrance of size
100x50x50cm for drainage pipe under footpath
including providing cement concrete 1:3:6 (1
cement : 3coarse sand : 6 graded stone
aggregate 20mm nominal size) for shape of bell
mouth including plastering providing and fixing
precast R.C.C./ S.F.R.C. slab including plastering
with cement mortar 1:3 (1 cement : 3 fine sand)
of 6mm thickness on exposed surface of the
slab & bell mouth including centring, shuttering
& neat cement punning inside the bell mouth
etc. all complete.
1.00 No. 1664.85 Each 1665.00
769 Providing and fixing Glow studs of size 100x20
mm made of heavy duty body shall be moulded
ASA (Acrylic styrene Acryloretrite ) or HIP (High
impact polystyrene) or ABS having electronically
welded micro-prismatic lens with abrasion
resistant coating as approved by Engineer in
charge. The glow stud shall support a load of
13635kg tested in accordance with ASTM
D4280.The slope of retro- reflective surface
shall be 35( +/-5) degrees to base .The reflective
panels on both sides with at least 12cm of
reflective area up each side. The luminance
intensity should be as per the specification and
shall be tested as described in ASTM I: 809 as
recommended in BS: 873 part 4 :1973. The
studs shall be fixed to the Road surface using
the adhesive conforming to IS, as per procedure
recommended by the manufacturer complete
and as per direction of Engineer-in-charge.
1.00 No. 240.00 Each 240.00
770 Preparation of sub-base road pavement with
commercial dry lime (slaked), fly ash stabilised
soil with a mix of 3% lime, 12% fly ash and 85%
local suitable soil by weight, so as to achieve
minimum field C.B.R. of 20 including mixing,
rolling with road roller curing etc. all complete.
a) Minimum thickness 15 cm. 1.00 Cum 627.10 One Cubic
Metre
627.00
771 Providing and fixing precast lime fly ash
concrete blocks 1:2:3:6 (1 lime: 2 fly ash : 3
nominal size), including finishing with 10mm
thick cement mortar 1:3(1 cement : 3 coarse
sand) in foot paths, including preparation of sub
grade with a hand rammer, laying 10 mm thick
leveling course of fine sand (Jamuna sand) and
filling the joints with fine sand.
Metre
6044.00
772 Providing and fixing concertina coil fencing with
punched tape concertina coil 600 mm dia 10
metre openable length ( total length 90 m)
having 50 no rounds per 6 metre length, upto
3m height of wall with existing angle iron 'Y'
shaped placed 2.4m or 3.00m apart and with 9
horizontal R.B.T. reinforced barbed wire, stud
tied with G.I. staples and G.I. clips to retain
horizontal including necessary bolts or G.I.
barbed wire tied to angle iron, all complete as
per direction of Engineer-in-charge, with
reinforced barbed tape(R.B.T.) /Spring core
(2.5mm thick) wire of high tensile strength of
165 kg/ sq.mm with tape (0.52 mm thick) and
weight 43.478gm/ metre (cost of M.S. angle,
C.C. blocks shall be paid separately)
1.00 Metre 284.10 One Running
Metre
284.00
773 Providing and laying Dense Graded Bituminous
Macadam using crushed stone aggregates of
specified grading, premixed with bituminous
binder and filler, transporting the hot mix to
work site by tippers, laying with paver finisher
equipped with electronic sensor to the required
grade, level and alignment and rolling with
smooth wheeled, vibratory and tandem rollers
as per specifications to achieve the desired
compaction and density, complete as per
specifications and directions of Engineer-in-
Charge.
a) 50 to 100 mm average compacted thickness
with bitumen of grade VG-30 @5% (percentage
by weight of total mix) and lime filler @ 2%
(percentage by weight of Aggregate) prepared
in Batch Type Hot Mix Plant of 100-120 TPH
capacity.
Metre
8725.00
b) 50 to 100 mm average compacted thickness
with bitumen of grade VG-30 @5% (percentage
by weight of total mix) and lime filler @ 2%
in Drum Type Hot Mix Plant of 60-90 TPH
capacity.
Metre
8489.00
774 Providing and laying bituminous macadam
using crushed stone aggregates of specified
grading premixed with bituminous binder,
transported to site by tippers, laid over a
previously prepared surface with paver finisher
equiped with electronic sensor to the required
as per specifications to achieve the desired
compaction and density, complete as per
specificatons and directions of Engineer-in-
Charge.
a) 50 to 100 mm average compacted thickness
with bitumen of grade VG-30 @ 3.50%
(percentage by weight of total mix) prepared in
Batch Type Hot Mix Plant of 100-120 TPH
capacity.
Metre
6652.00
b) 50 to 100 mm average compacted thickness
with bitumen of grade VG-30 @ 3.50%
(percentage by weight of total mix) prepared in
Drum Type Hot Mix Plant of 60-90 TPH capacity.
Metre
6427.00
775 Providing and laying semi- dense Bituminous
concrete using crushed stone aggregates of
specified grading, premixed with bituminous
binder and filler, transporting the hot mix to
work site by tippers, laying with paver finisher
equiped with electronic sensor to the required
to achieve the desired compaction and density
as per specification, complete and as per
directions of Engineer-in-Charge.
a) 25 mm compacted thickness with bitumen of
grade VG-30 @ 5% (percentage by weight of
total mix) and lime filler @ 2% (percentage by
weight of Aggregate) prepared in Batch Type
Hot Mix Plant of 100-120 TPH capacity.
Metre
218.00
b) 25 mm compacted thickness with bitumen of
grade VG-30 @ 5% (percentage by weight of
total mix) and lime filler @ 2% (percentage by
weight of Aggregate) prepared in Drum Type
Metre
212.00
776 Providing and laying Bituminous concrete using
crushed stone aggregates of specified grading,
premixed with bituminous binder and filler,
transporting the hot mix to work site by tippers,
laying with paver finisher equipped with
electronic sensor to the required grade, level
and alignment and rolling with smooth
wheeled, vibratory and tandem rollers to
achieve the desired compaction and density as
per specification, complete and as per
directions of Engineer-in-Charge.
a) 40/50 mm compacted thickness with bitumen
of grade VG-30 @ 5.5% (percentage by weight
of total mix) and lime filler @ 3% (percentage
by weight of Aggregate) prepared in Batch Type
Metre
9502.00
b) 40/50 mm compacted thickness with bitumen
by weight of Aggregate) and waste plastic
additive @ 8% (percentage by weight of
bitumen) prepared in Batch Type Hot Mix Plant
of 100-120 TPH capacity.
Metre
9984.00
c) 40/50 mm compacted thickness with bitumen
of grade PMB-40 @5.5% (percentage by weight
by weight of Aggregate) prepared in Batch Type
Metre
9563.00
d) 40/50 mm compacted thickness with bitumen
of grade CRMB-60 @ 5.5% (percentage by
weight of total mix) and lime filler @ 3%
in Batch Type Hot Mix Plant of 100-120 TPH
capacity.
Metre
9472.00
e) 40/50 mm compacted thickness with bitumen
by weight of Aggregate) prepared in drum Type
Metre
9262.00
f) 40/50 mm compacted thickness with bitumen
by weight of Aggregate) and waste plastic
additive @ 8% (percentage by weight of
bitumen) prepared in drum Type Hot Mix Plant
of 60-90 TPH capacity.
Metre
9743.00
g) 40/50 mm compacted thickness with bitumen
of grade PMB-40 @5.5% (percentage by weight
by weight of Aggregate) prepared in drum Type
Metre
9322.00
h) 40/50 mm compacted thickness with bitumen
of grade CRMB-60 @ 5.5% (percentage by
weight of total mix) and lime filler @ 3%
in Drum Type Hot Mix Plant of 60-90 TPH
capacity.
Metre
9232.00
777 Manufacturing, supplying and fixing retro
reflective sign boards made up of 2mm thick
aluminium sheet, face to be fully covered with
high intensity encapsulated type heat activated
retro reflective sheeting conforming to type- IV
of ASTM-D 4956-01 in blue and silver white or
other colour combination including subject
matter, message (bi-lingual), symbols and
borders etc. as per IRC:67-2001, pasted on
substrate by an adhesive backing which shall be
activated by applying heat and pressure
conforming to class -2 of ASTM-D-4956-01 and
fixing the same with suitable sized aluminium
alloy rivets @20 cm c/c to back support frame
of M.S. angle iron of size 25x25x3 mm along
with theft resistant measures, mounted and
fixed with 2 Nos. M.S. angles of size 35x35x5
mm to a vertical post made up to M.S. Tee
section ISMT 50x50x6 mm welded with base
plate of size 100x100x5 mm at the bottom end
and including making holes in pipes, angles
flats, providing &fixing M.S. message plate of
required size, steel work to be painted with two
or more coats of synthetic enamel paint of
required shade and of approved brand &
manufacture over priming coat of zinc
chromate yellow primer (vertical MS-Tee
support to be painted in black and white
Backside of aluminium sheet to be painted with
two or more coats of epoxy paint over and
including appropriate priming coat including all
leads and lifts etc. complete as per drawing,
specification and direction of Engineer-in-
charge.
a) Mandatory/Regulatory sign boards of 900 mm
diametre with support length of 3750 mm.
Metre
4844.00
b) Cautionary/warning sign boards of equilateral
triangular shape having each side of 900mm
with support length of 3650mm.
Metre
3532.00
778 Manufacturing, supplying and fixing retro
reflective overhead signage boards made up of
2mm thick aluminium sheet, face to be fully
covered with high intensity and encapsulated
lens type heat activated retro reflective
sheeting conforming to type - III of ASTM-D-
4956-01 as approved by Engineer-in-charge,
letters, borders etc. as per IRC:67-2001 in silver
white with blue colour back ground and with
high intensity grade, pasted on substrate by
pressure sensitive adhesive backing which shall
be activated by applying pressure conforming to
class II of ASTM- D-4956-01 and fixing the same
to the plate of structural frame work by means
of suitable sized aluminium alloys, rivets or
bolts & nuts @ 300mm centre to centre all
along the periphery as well as in two vertical
rows along with theft resistant measures,
including the cost of painting with two or more
coats of epoxy paint in grey colour on the back
side of aluminium sheet including appropriate
priming coat. The rate includes the cost of
rounding off the corners, lowering down the
structural frame work from the gantry, fixing
and erecting the same inposition all complete
as per drawings, specification and direction of
the Engineer- in- charge. (Structural frame work
including M.S. plate to be provided separately.
Rectangular area of the sheet only shall be
measured for payment).
a) Overhead informatory road signage. 1.00 Sqm 4657.95 One Square
Metre
4658.00
779 Providing Retro-reflective regulatory sign board
of size 900mm dia meter made out of 2mm
thick aluminium sheet, face to be fully covered
with high intensity encapsulated lens type retro -
reflective sheeting as approved by Engineer-in-
charge . Letters, symbols, borders etc. will be as
per IRC:67-2001 with required colour scheme
on the boards and with the high intensity grade
A. The aluminium sheet to be riveted to M.S.
frame of angle iron of size 40x40x4mm. The
boards will be fixed to 1 No. 50x50mm square
post made of M.S. angle 50x50x4mm, 4m long
welded to the frame with adequate anti-theft
arrangement. Sheet work to be painted with
two or more coats of synthetic enamel paint
over an under coat (primer) and back side of
aluminium sheet to be painted with two or
more coats of epoxy paint including appropriate
priming coat complete in all respects as per
Metre
5373.00
780 Providing and applying 2.5mm thick road
marking strips (retro-reflective) of specified
shade/colour using hot thermoplastic material
by fully/semiautomatic thermoplastic paint
applicator machine fitted with profile shoe,
glass beads dispenser, propane tank heater and
profile shoe heater, driven by experienced
operator on road surface including cost of
material, labour, T&P, cleaning the road surface
of all dirt, seals, oil, grease and foreign material
etc. complete as per direction of Engineer-in-
charge and accordance with applicable
specifications.
Metre
529.00
781 Providing, laying and making kerb channel 30cm
wide and 50mm thick with cement concrete
1:3:6 (1 cement: 3 coarse sand:6 graded stone
aggregate 20mm nominal size) over 75mm bed
of dry brick ballast 40mm nominal size, well
rammed and consolidated and grouted with
fine sand, including finishing the top smooth
etc. complete and as per direction of Engineer-
in-charge.
Metre
318.00
782 Providing and laying 75mm thick compacted
bed of dry brick aggregate of 40mm thick
nominal size including spreading, well ramming,
consolidating and grouting with Jamuna sand,
including finishing smooth etc. complete as per
Metre
107.00
783 Providing and fixing post delineators made of
ABS round body fitted with 2 nos.100mm dia
high reflective reflectors and mounted on MS
pipe of 65mmdia duly powder coated anti-rust
and anti theft steel to be installed as per
1.00 No. 591.10 Each 591.00
784 Excavating holes upto 0.10cum including getting
out the excavated soil, then returning the soil as
deported in layers not exceeding 20cm in depth
including, consolidating and deposited layer by
ramming watering etc,. Disposing of surplus
excavated soil as directed with in a lead of 50m
and lift upto 1.50 m.
a) All kind of soil. 1.00 No. 15.70 Each 16.00
785 Providing and fixing at or near ground level
factory made RCC pavement slab of M-30 grade
of size 450x450x50mm, including reinforcement
with6mm dia M.S. bars 4 nos on each side,
including setting in position in footpath to the
required level and line over a bed of 20mm
average thick cement mortar 1:5 (1 cement : 5
coarse sand ), having joint thickness not more
than 5mm except on curve, including filling of
joints with same cement mortar and making
grooves etc. complete as per direction of
Engineer-in-charge.
Metre
562.00
786 Providing and laying 60mm thick factory made
cement concrete interlocking paver block of M-
30 grade made by block making machine with
strong vibratory compaction, of approved size,
design & shape, laid in required colour and
pattern over and including 50mm thick
compacted bed of fine sand, filling the joints
with coarse sand etc. all complete as per the
Metre
557.00
787 Providing and laying at or near ground level
factory made kerb stone of M-25 grade cement
concrete in position to the required line, level
and curvature, jointed with cement mortar 1:3
(1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of
joints except at sharp curve shall not to more
than 5mm), including making drainage opening
wherever required complete etc. as per
direction of Engineer-in-charge (length of
finished kerb edging shall be measured for
payment). (Precast C.C. kerb stone shall be
approved by Engineer-in-charge).
Metre
5237.00
788 Providing and fixing G.I. chain link fabric fencing
of required width in mesh size 50x50mm
including strengthening with 2mm dia wire or
nuts, bolts and washers as required complete as
per the direction of Engineer-in-charge.
a) Made of G.I. wire of dia 4mm. 1.00 Sqm 525.55 One Square
Metre
526.00
b) Made of G.I. wire of dia. 4mm, PVC coated to
achieve outer dia. not less than 5mm in
required colour and shade.
Metre
559.00
789 Providing and fixing G.I. chain link fabric fencing
of required width in mesh size 25x25mm made
of G.I. wire of dia. 3mm including strengthening
with 2mm dia. wire or nuts, bolts and washers
as required complete as per the direction of
Engineer-in-charge.
Metre
626.00
790 Supplying and stacking of hard stone (for stone
pitching) 22.5 cm thick at site.
Metre
668.00
791 Dry stone pitching 22.5cm thick laid in courses
and required profile with hammer dressed
stones having no side less than 15cm, with
minimum depth of 20cm including preparing
the bedding surface etc. all complete.(Payment
for Stone to be made separately)
Metre
226.00
792 75 mm thick back filling for pitching including
supplying of required materials and
consolidation etc. complete with :
a) Moorum. 1.00 Sqm 54.65 One Square
Metre
55.00
b) Stone aggregate 20 mm nominal size. 1.00 Sqm 121.40 One Square
Metre
121.00
c) Stone aggregate 40 mm nominal size. 1.00 Sqm 104.80 One Square
Metre
105.00
793 Providing and laying C.C. pavement of mix M-25
with ready mixed concrete from batching plant.
The ready mixed concrete shall be laid and
finished with screed board vibrator , vacuum
dewatering process and finally finished by
floating, brooming with wire brush etc.
complete as per specifications and directions of
Engineer-in-charge. (The panel shuttering work
shall be paid for separately).
(Note:- Cement content considered in this item
is @ 330 kg/cum. Excess/less cement used as
per design mix is payable/ recoverable
separately).
Metre
6248.00
794 Deduct for using of M-20 grade concrete
instead of M-25 grade concrete in C.C.
pavement.
Metre
-173.00
795 Scarifying the existing bituminous road surface
to a depth of 50mm and disposal of scarified
material within all lifts and lead upto 1 km (by
mechanical means).
Metre
3.00
796 Construction of granular sub-base by providing
close graded Material conforming to
specifications, mixing in a mechanical mix plant
at OMC, carriage of mixed material by tippers to
work site, for all leads & lifts, spreading in
uniform layers of specified thickness with motor
grader on prepared surface and compacting
with vibratory power roller to achieve the
desired density, complete as per specifications
and directions of Engineer-in-Charge.
a) With material conforming to Grade-I (size range
75 mm to 0.075 mm ) having CBR Value-30.
Metre
2019.00
b) With material conforming to Grade-II (size
range 53 mm to 0.075 mm ) having CBR Value-
25.
Metre
2044.00
c) With material conforming to Grade-III (size
range 26.5 mm to 0.075 mm ) having CBR Value-
20.
Metre
2030.00
797 Providing, laying, spreading and compacting
graded stone aggregate (size range 53 mm to
0.075 mm ) to wet mix macadam (WMM)
specification including premixing the material
with water at OMC in mechanical mix plant,
carriage of mixed material by tipper to site, for
all leads & lifts, laying in uniform layers with
mechanical paver finisher in sub- base / base
course on well prepared surface and
compacting with vibratory roller of 8 to 10
tonne capacity to achieve the desired density,
complete as per specifications and directions of
Engineer-in-Charge.
Metre
2074.00
798 Construction of dry lean cement concrete sub
base over a prepared sub-grade with coarse and
fine aggregate conforming to IS:383, the size of
coarse aggregate not exceeding 25 mm,
aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per
specifications, cement content not to be less
than 150 Kg/cum, optimum moisture content to
be determined during trial length construction,
concrete strength not to be less than 10 Mpa at
7 days, mixed in a batching plant, transported
to site, for all leads & lifts, laid with a
mechanical paver, compacting with 8-10 tonne
vibratory roller, finishing and curing etc.
Metre
3003.00
799 Providing and erecting 2.00 metre high
temporary barricading at site as per drawing/
direction of Engineer-in-Charge which includes
writing and painting, arrangement for traffic
diversion such as traffic signals during
construction at site for day and night, glow
lamps, reflective signs, marking, flags, caution
tape as directed by the Engineer-in-Charge. The
barricading provided shall be retained in
position at site continuously i/c shifting of
barricading from one location to another
location as many times as required during the
execution of the entire work till its completion.
Rate include its maintenance for damages,
painting, all incidentals, labour materials,
equipments and works required to execute the
job. The barricading shall not be removed
without prior approval of Engineer-in-Charge.
(Note :- One time payment shall be made for
providing barricading from start of work till
completion of work i/c shifting. The barricading
provided shall remain to be the property of the
contractor on completion of the work).
Metre
1314.00
800 Taking out existing kerb stones of all types from
footpath/ central verge, including removal of
mortar etc., disposal of unserviceable material
to the dumping ground for which payment shall
be made separately and stacking of serviceable
material within 50 metre lead as per direction
of Engineer-in-Charge.
Metre
13.00
801 Taking out existing CC interlocking paver blocks
from footpath/ central verge, including removal
of rubbish etc., disposal of unserviceable
material to the dumping ground, for which
payment shall be made separately and stacking
of serviceable material within 50 metre lead as
per direction of Engineer-in-Charge.
Metre
44.00
802 Laying old cement concrete interlocking paver
blocks of any design/shape laid in required line,
level, curvature, colour and pattern over and
including 50mm thick compacted bed of coarse
sand, filling the joints with fine sand etc. all
complete as per the direction of Engineer-in-
charge. (Old CC paver blocks shall be supplied
by the department free of cost).
Metre
180.00
803 Laying at or near ground level old kerb stones
of all types in position to the required line, level
and curvature, jointed with cement mortar 1:3
(1 cement : 3 coarse sand), including making
joints with or without grooves (thickness of
joints, except at sharp curve, shall not be more
than 5mm), including making drainage opening
wherever required etc. complete as per
direction of Engineer-in-charge. (Length of
finished kerb edging shall be measured for
payment). (Old kerb stones shall be supplied by
the department free of cost)
1.00 Metre 39.90 One Metre 40.00
804 Providing and laying gang saw cut 18mm thick,
mirror polished pre moulded and pre polished
machine cut granite stone of required size and
shape of approved shade, colour and texture in
footpath, flooring in road side plazas and
similar locations, laid over 20mm thick base of
cement mortar 1:4 (1cement : 4 coarse sand)
including grouting the joints with white cement
mixed with matching pigment, epoxy touch ups
Charge.
a) Area less than 0.50 sqm 1.00 Sqm 3068.80 One Square
Metre
3069.00
805 Providing and laying gang saw cut 30mm thick,
mirror polished pre moulded and pre polished
machine cut granite stone of required size and
shape of approved shade, colour and texture in
footpath, flooring in road side plazas and
similar locations, laid over 20mm thick base of
including grouting the joints with white cement
mixed with matching pigment, epoxy touch ups
Charge.
a) Area less than 0.50 sqm 1.00 Sqm 3556.60 One Square
Metre
3557.00
806 Providing and laying matt finished vitrified tile
of size 100x100x16mm having water absorption
less than 0.5% and conforming to IS: 15622 of
approved make in all colours and shades in out
door floors such as footpath, court yard multi
models etc., laid on 20mm thick base of cement
mortar 1:4 (1cement : 4 coarse sand) in all
shapes & patterns including grouting the joints
with white cement mixed with matching
pigments etc. complete as direction of Engineer-
in-Charge.
Metre
1435.00
807 Providing and laying matt finished vitrified tile
of size 300x300x9.8mm having with water
absorption less than 0.5% and conforming to IS:
15622 of approved make in all colours and
shades in for outdoor floors such as footpath,
court yard, multi modals location etc., laid on
20mm thick base of cement mortar 1:4
(1cement : 4 coarse sand) in all shapes &
patterns including grouting the joints with white
cement mixed with matching pigments etc.
complete as per direction of Engineer-in-
Charge.
Metre
947.00
808 Providing and laying tactile tile (for vision
impaired persons as per standards) of size
300x300x9.8mm having with water absorption
less than 0.5% and conforming to IS: 15622 of
approved make in all colours and shades in for
outdoor floors such as footpath, court yard,
multi modals location etc., laid on 20mm thick
base of cement mortar 1:4 (1cement : 4 coarse
sand) in all shapes & patterns including grouting
the joints with white cement mixed with
matching pigments etc. complete as per the
Metre
1363.00
809 Providing and laying factory made coloured
chamfered edge Cement Concrete paver blocks
of required strength, thickness & size/shape,
made by table vibratory method using PU
mould, laid in required colour & pattern over
50mm thick compacted bed of fine sand,
compacting and proper embedding/laying of
inter locking paver blocks into the sand bedding
layer through vibratory compaction by using
plate vibrator, filling the joints with jamuna
sand and cutting of paver blocks as per required
size and pattern, finishing and sweeping extra
sand in footpath, parks, lawns, drive ways or
light traffic parking etc. complete as per
manufacturer's specifications & direction of
Engineer-in-Charge.
60mm thick C.C. paver block of M-35 grade with
approved colour, complete design & pattern.
Metre
727.00
810 Providing and fixing 10x10x7.50 cm Granite
stone block hand cut and chisel dressed on top,
for paving in floors, drains etc. laid over 20mm
thick base mortar 1:4 (1cement:4 coarse sand)
with joints 10mm wide filled with same mortar
including ruled pointing etc. complete as per
direction of engineer-in charge.
Metre
1319.00
243136.00
811 Providing and fixing water closet squatting pan
(Indian type W.C. pan ) with 100 mm sand cast
Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with
manually controlled device(handle lever)
conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making
good the walls and floors wherever required :
a) White Vitreous china Orissa pattern W.C. pan of
size 580x440 mm with integral type foot rests.
1.00 No. 3265.25 Each 3265.00
b) Stainless Steel AISI-304(18/8) Orissa pattern
W.C. pan of size 585x480 mm with flush pipe
and integrated type footrests.
1.00 No. 6773.00 Each 6773.00
812 Providing and fixing white vitreous china
pedestal type water closet (European type W.C.
pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with
manually controlled device (handle lever),
conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making
a) W.C. pan with ISI marked white solid plastic
seat and lid
1.00 No. 3189.75 Each 3190.00
b) W.C. pan with ISI marked black solid plastic seat
and lid
1.00 No. 3166.55 Each 3167.00
pedestal type water closet (European type) with
seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with
fittings & C.I. brackets, 40mm flush bend,
overflow arrangement with specials of standard
make and mosquito proof coupling of approved
municipal design complete, including painting
of fittings and brackets, cutting and making
Total of the Sub-Head - Road Work :
Sub-Head : Sanitary Installations
a) W.C. pan with ISI marked white solid plastic
seat and lid.
1.00 No. 4636.25 Each 4636.00
b) W.C. pan with ISI marked black solid plastic seat
and lid.
1.00 No. 4613.05 Each 4613.00
814 Providing and fixing white vitreous china flat
back or wall corner type lipped front urinal
basin of 430x260x350 mm and 340x410x265
mm sizes respectively with automatic flushing
cistern with standard flush pipe and C.P. brass
spreaders with brass unions and G.I clamps
complete, including painting of fittings and
brackets, cutting and making good the walls and
floors wherever required :
a) One urinal basin with 5 litre white P.V.C.
automatic flushing cistern.
1.00 No. 3174.60 Each 3175.00
b) Range of two urinal basins with 5 litre white
P.V.C. automatic flushing cistern.
1.00 No. 5166.90 Each 5167.00
c) Range of three urinal basins with 10 litre white
1.00 No. 6887.15 Each 6887.00
d) Range of four urinal basins with 10 litre white
1.00 No. 9580.35 Each 9580.00
back half stall urinal of size 580x380x350 mm
with white PVC automatic flushing cistern, with
fittings, standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in C.P.
brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in
C.P. brass, including painting of fittings and
cutting and making good the walls and floors
wherever required :
a) Single half stall urinal with 5 litre P.V.C.
1.00 No. 6249.20 Each 6249.00
b) Range of two half stall urinals with 5 litre P.V.C.
1.00 No. 9826.90 Each 9827.00
c) Range of three half stall urinals with 10 litre
1.00 No. 12816.05 Each 12816.00
d) Range of four half stall urinals with 10 litre
1.00 No. 15674.30 Each 15674.00
816 Providing and fixing one piece construction
white vitreous china squatting plate with an
integral longitudinal flushing pipe, white P.V.C.
automatic flushing cistern, with fittings,
standard size G.I. / PVC flush pipe for back and
front flush with standard spreader pipes with
fittings, G.I clamps and C.P. brass coupling
complete, including painting of fittings and
cutting and making good the walls and floors
etc. wherever required :
a) Single squatting plate with 5 litre P.V.C.
1.00 No. 4023.50 Each 4024.00
b) Range of two squatting plates with 5 litre P.V.C.
1.00 No. 5860.20 Each 5860.00
c) Range of three squatting plates with 10 litre
1.00 No. 7719.75 Each 7720.00
d) Range of four squatting plates with 10 litre
1.00 No. 9328.15 Each 9328.00
817 Providing and fixing wash basin with C.I.
brackets, 15 mm C.P. brass pillar taps, 32 mm
C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and
making good the walls wherever require :
a) White Vitreous China Wash basin size 630x450
mm with a pair of 15 mm C.P. brass pillar taps.
1.00 No. 2174.65 Each 2175.00
b) White Vitreous China Wash basin size 630x450
mm with a single 15 mm C.P. brass pillar tap.
1.00 No. 1903.25 Each 1903.00
c) White Vitreous China Wash basin size 550x400
mm with a pair of 15 mm C.P. brass pillar taps.
1.00 No. 1971.35 Each 1971.00
d) White Vitreous China Flat back wash basin size
550x400 mm with single 15 mm C.P. brass pillar
tap.
1.00 No. 1699.95 Each 1700.00
e) White Vitreous China Angle back wash basin
size 600x480 mm with single 15 mm C.P. brass
pillar tap.
1.00 No. 1903.35 Each 1903.00
f) White Vitreous China Angle back wash basin
size 400x400 mm with single 15 mm C.P. brass
pillar tap.
1.00 No. 1554.80 Each 1555.00
g) White Vitreous China Flat back wash basin size
tap.
1.00 No. 1554.80 Each 1555.00
h) White Vitreous China Surgeon type wash basin
of size 660x460 mm with a pair of 15 mm C.P.
brass pillar taps with elbow operated levers.
1.00 No. 3748.45 Each 3748.00
i) White Vitreous China Surgeon type wash basin
of size 660x460 mm with single 15 mm C.P.
brass pillar taps with elbow operated levers ISI
marked.
1.00 No. 2907.90 Each 2908.00
j) Stainless Steel AISI-304(18/8) Round basin
tap.
1.00 No. 3209.90 Each 3210.00
k) Stainless Steel AISI-304(18/8) Wash basin
tap.
1.00 No. 2977.60 Each 2978.00
pedestal for wash basin completely recessed at
the back for the reception of pipes and fittings.
1.00 No. 972.45 Each 972.00
819 Providing and fixing kitchen sink with C.I.
brackets, C.P. brass chain with rubber plug, 40
mm C.P. brass waste complete, including
painting the fittings and brackets, cutting and
making good the walls wherever required :
a) White glazed fire clay kitchen sink of size
600x450x250 mm.
1.00 No. 2388.45 Each 2388.00
820 Providing and fixing Stainless Steel A ISI 304
(18/8) kitchen sink as per IS 13983 with C.I.
brackets and stainless steel plug 40 mm,
including painting of fittings and brackets,
cutting and making good the walls wherever
required :
a) Kitchen sink with drain board
(i) 510x1040 mm bowl depth 250 mm. 1.00 No. 6975.40 Each 6975.00
(ii) 510x1040 mm bowl depth 225 mm. 1.00 No. 6702.45 Each 6702.00
(iii) 510x1040 mm bowl depth 200 mm. 1.00 No. 5889.40 Each 5889.00
(iv) 510x1040 mm bowl depth 178 mm. 1.00 No. 4437.50 Each 4438.00
b) Kitchen sink without drain board
(i) 610x510 mm bowl depth 200 mm. 1.00 No. 4290.80 Each 4291.00
(ii) 610x460 mm bowl depth 200 mm. 1.00 No. 3936.55 Each 3937.00
(iii) 470x420 mm bowl depth 178 mm. 1.00 No. 3094.45 Each 3094.00
laboratory sink with C.I. brackets, C.P. brass
chain with rubber plug, 40 mm C.P brass waste
and 40mm C.P. brass trap with necessary C.P.
brass unions complete including painting of
fittings and brackets, cutting and making good
the wall wherever required :
a) Size 450x300x150 mm 1.00 No. 2173.60 Each 2174.00
b) Size 600x450x200 mm 1.00 No. 2992.45 Each 2992.00
822 Providing and fixing draining board with C.I.
brackets including painting of brackets, cutting
and making good the walls wherever required :
a) White glazed fire clay draining board of size
600x450x25 mm
1.00 No. 994.20 Each 994.00
823 Providing and fixing white vitreous china water
closet squatting pan (Indian type)
a) Long pattern W.C. pan of size 580 mm 1.00 No. 976.50 Each 977.00
b) Orissa pattern W.C. pan of size 580x440 mm 1.00 No. 1359.80 Each 1360.00
824 Extra for using coloured W.C. pan instead of
white W.C. pan
a) Orissa pattern W.C. pan 580x440 mm 1.00 No. 627.20 Each 627.00
pedestal type (European type/ wash down type)
water closet pan.
1.00 No. 1266.90 Each 1267.00
826 Extra for using coloured pedestal type W.C pan
(European type) with low level cistern of same
colour instead of white vitreous china W.C pan
and cistern.
1.00 No. 1446.05 Each 1446.00
827 Providing and fixing a pair of white vitreous
china foot rests of standard pattern for
squatting pan water closet:
a) 250x130x30 mm 1.00 pairs 159.45 One Pair 159.00
b) 250x125x25 mm 1.00 pairs 159.45 One Pair 159.00
828 Providing and fixing P.V.C. low level flushing
cistern with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings
and fixtures complete.
a) 10 litre capacity - White 1.00 No. 853.80 Each 854.00
b) 10 litre capacity - coloured 1.00 No. 909.65 Each 910.00
829 Providing and fixing controlled flush, low level
cistern made of vitreous china with all fittings
complete.
a) 10 litre (full flush) capacity-white 1.00 No. 1559.85 Each 1560.00
b) 10 litre (full flush) capacity-coloured 1.00 No. 2169.65 Each 2170.00
830 Providing and fixing solid plastic seat with lid for
pedestal type W.C. pan complete :
a) White solid plastic seat with lid 1.00 No. 409.75 Each 410.00
b) Black solid plastic seat with lid 1.00 No. 386.50 Each 387.00
c) Coloured (other than black & white) solid
plastic seat with lid
1.00 No. 665.25 Each 665.00
831 Providing and fixing G.I. inlet connection for
flush pipe connecting with W.C. pan.
1.00 No. 101.95 Each 102.00
back or wall corner type lipped front urinal
basin of 430x260x350 mm or 340x410x265 mm
sizes respectively.
1.00 No. 857.55 Each 858.00
squatting plate urinal with integral rim
longitudinal flush pipe.
1.00 No. 1731.90 Each 1732.00
834 Providing and fixing white vitreous china wash
basin including making all connections but
excluding the cost of fittings :
a) Flat back wash basin of size 630x450 mm. 1.00 No. 967.10 Each 967.00
b) Flat back wash basin of size 550x400 mm. 1.00 No. 763.85 Each 764.00
c) Angle back wash basin of size 600x480 mm. 1.00 No. 967.10 Each 967.00
d) Angle back wash basin of size 400x400mm. 1.00 No. 618.65 Each 619.00
e) Flat back wash basin of size 450x300 mm. 1.00 No. 618.65 Each 619.00
f) Surgeon type wash basin of size 660x460 mm. 1.00 No. 1402.65 Each 1403.00
835 Providing and fixing kitchen sink including
making all connections excluding cost of
fittings.
a) White glazed fire clay sink of size 600x450x250
mm.
1.00 No. 1669.15 Each 1669.00
laboratory sink including making all connections
excluding cost of fittings:
a) Size 450x300x150 mm. 1.00 No. 1053.55 Each 1054.00
b) Size 600x450x200 mm. 1.00 No. 1872.40 Each 1872.00
837 Providing and fixing P.V.C. waste pipe for sink or
wash basin including P.V.C. waste fittings
complete.
a) Semi rigid pipe
(i) 32 mm dia 1.00 No. 74.90 Each 75.00
(ii) 40 mm dia 1.00 No. 80.70 Each 81.00
b) Flexible pipe
(i) 32 mm dia 1.00 No. 72.55 Each 73.00
(ii) 40 mm dia 1.00 No. 74.90 Each 75.00
838 Providing and fixing 100 mm sand cast Iron
grating for gully trap.
1.00 No. 29.10 Each 29.00
839 Providing and fixing in position 25mm diameter
mosquito proof coupling of approved municipal
design.
1.00 No. 38.45 Each 38.00
840 Providing and fixing 600x450 mm beveled edge
mirror of superior glass (of approved quality)
complete with 6 mm thick hard board ground
fixed to wooden cleats with C.P. brass screws
and washers complete.
1.00 No. 762.55 Each 763.00
841 Providing and fixing mirror of superior glass (of
approved quality) and of required shape and
size with plastic moulded frame of approved
make and shade with 6 mm thick hard board
backing :
a) Circular shape 450 mm dia. 1.00 No. 856.65 Each 857.00
b) Rectangular shape 453x357 mm 1.00 No. 700.30 Each 700.00
c) Oval shape 450x350 mm (outer dimensions) 1.00 No. 756.35 Each 756.00
d) Rectangular shape 1500x450 mm 1.00 No. 1304.75 Each 1305.00
842 Providing and fixing 600x120x5 mm glass shelf
with edges round off, supported on anodised
aluminium angle frame with C.P. brass brackets
and guard rail complete fixed with 40 mm long
screws, rawl plugs etc., complete.
1.00 No. 522.20 Each 522.00
843 Providing and fixing toilet paper holder :
a) C.P. brass 1.00 No. 339.85 Each 340.00
b) Vitreous china 1.00 No. 322.15 Each 322.00
844 Providing and fixing soil, waste and vent pipes :
a) 100 mm dia.
(i) Sand cast iron S&S pipe as per IS: 1729. 1.00 m 854.85 One Running
Metre
855.00
(ii) Centrifugally cast (spun) iron socket & spigot
(S&S) pipe as per IS: 3989.
Metre
953.00
b) 75 mm diameter :
(i) Sand cast iron S&S pipe as per IS: 1729. 1.00 m 705.55 One Running
Metre
706.00
(ii) Centrifugally cast (spun) iron socketed pipe as
per IS: 3989.
Metre
788.00
845 Providing and filling the joints with spun yarn,
cement slurry and cement mortar 1:2 ( 1
cement : 2 fine sand) in S.C.I./ C.I. Pipes :
a) 75 mm dia pipe 1.00 No. 59.50 Each 60.00
b) 100 mm dia pipe 1.00 No. 70.10 Each 70.00
846 Providing and fixing M.S. holder-bat clamps of
approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including cement
concrete blocks 10x10x10 cm of 1:2:4 mix (1
aggregate 20 mmnominal size) including cost of
cutting holes and making good the walls etc. :
a) For 100 mm dia. Pipe 1.00 No. 140.65 Each 141.00
b) For 75 mm dia. Pipe 1.00 No. 138.35 Each 138.00
847 Providing and fixing bend of required degree
with access door, insertion rubber washer 3
mm thick, bolts and nuts complete.
a) 100 mm dia
(i) Sand cast iron S&S as per IS - 1729 1.00 No. 340.30 Each 340.00
(ii) Sand cast iron S&S as per IS - 3989 1.00 No. 384.45 Each 384.00
b) 75 mm dia
(ii) Sand cast iron S&S as per IS- 3989 1.00 No. 317.50 Each 318.00
848 Providing and fixing plain bend of required
degree.
a) 100 mm dia
(ii) Sand cast iron S&S as per IS : 3989 1.00 No. 334.50 Each 335.00
b) 75 mm dia
(i) Sand cast iron S&S as per IS -1729 1.00 No. 218.75 Each 219.00
849 Providing and fixing heel rest sanitary bend
a) 100 mm dia
b) 75 mm dia
850 Providing and fixing double equal junction of
required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts
complete :
a) 100x100x100x100 mm
b) 75x75x75x75 mm
851 Providing and fixing double equal plain junction
of required degree.
a) 100x100x100x100 mm
b) 75x75x75x75 mm
852 Providing and fixing single equal plain junction
of required degree with access door, insertion
complete.
a) 100x100x100 mm
b) 75x75x75 mm
853 Providing and fixing single equal plain junction
of required degree :
a) 100x100x100 mm
b) 75x75x75 mm
854 Providing and fixing double unequal junction of
complete :
a) 100x100x75x75 mm
855 Providing and fixing double unequal plain
junction of required degree:
a) 100x100x75x75 mm
856 Providing and fixing single unequal junction of
complete :
a) 100x100x75 mm
857 Providing and fixing single unequal plain
junction of required degree :
a) 100x100x75 mm
858 Providing and fixing double equal plain invert
branch of required degree:
a) 100x100x100x100 mm
(ii) Sand cast iron S&S as per IS 3989 1.00 No. 642.30 Each 642.00
b) 75x75x75x75 mm
859 Providing and fixing single equal plain invert
branch of required degree:
a) 100x100x100 mm
(i) Sand cast iron S&S as per iron 1729 1.00 No. 502.90 Each 503.00
b) 75x75x75 mm
860 Providing and fixing double unequal invert
branch of required degree :
a) 100x100x75x75 mm
861 Providing and fixing single unequal plain invert
branch of required degree :
a) 100x100x75 mm
862 Providing and fixing sand cast iron S&S off sets
as per IS: 1729
a) 76 mm off sets
(i) With 75 mm dia pipe 1.00 No. 274.50 Each 275.00
(ii) With 100 mm dia pipe 1.00 No. 442.90 Each 443.00
b) 114 mm off sets
(ii) With 100 mm dia Pipe 1.00 No. 471.55 Each 472.00
c) 152 mm off sets
(i) With 75 mm dia Pipe 1.00 No. 451.25 Each 451.00
863 Providing and fixing sand cast iron S&S off sets
as per IS: 3989.
a) 75 mm off sets
b) 150 mm off sets
864 Providing and fixing door piece, insertion
rubber washer 3mm thick, bolts & nuts
complete :
a) 100 mm
b) 75 mm
865 Providing and fixing terminal guard:
a) 100 mm
b) 75 mm
866 Providing and fixing collar:
a) 100 mm
b) 75 mm
(ii) Sand cast iron S&S as per IS- 3989 1.00 No. 218.75 Each 219.00
867 Providing lead caulked joints to sand cast
iron/centrifugally cast (spun) iron pipes and
fittings of diameter:
a) 100 mm 1.00 No. 232.30 Each 232.00
b) 75 mm 1.00 No. 196.20 Each 196.00
c) 50 mm 1.00 No. 156.60 Each 157.00
868 Providing and fixing M.S. stays and clamps for
sand cast iron/centrifugally cast (spun) iron
pipes of diameter :
a) 100 mm 1.00 No. 67.35 Each 67.00
b) 75 mm 1.00 No. 56.15 Each 56.00
c) 50 mm 1.00 No. 51.25 Each 51.00
869 Providing and fixing trap of self cleansing design
with screwed down or hinged grating with or
without vent arm complete, including cost of
cutting and making good the walls and floors :
a) 100 mm inlet and 100 mm outlet
(i) Sand cast iron S&S as per IS: 3989. 1.00 No. 938.05 Each 938.00
(ii) Sand Cast Iron S&S as per IS: 1729. 1.00 No. 752.20 Each 752.00
b) 100 mm inlet and 75 mm outlet
(ii) Sand Cast Iron S&S as per IS- 1729. 1.00 No. 686.00 Each 686.00
870 Cutting chases in brick masonry walls for
following diameter sand cast iron/ centrifugally
cast (spun) iron pipes and making good the
same with cement concrete 1:3:6 ( 1 cement : 3
coarse sand :6 graded stone aggregate 12.5 mm
nominal size ) including necessary plaster and
pointing in cement mortar 1:4 (1 cement : 4
coarse sand) :
a) 100 mm dia. 1.00 m 302.60 One Running
Metre
303.00
b) 75 mm dia. 1.00 m 216.60 One Running
Metre
217.00
c) 50 mm dia. 1.00 m 138.40 One Running
Metre
138.00
871 Painting C.I. cistern with bitumastic or any other
anti-corrosive paint inside and white paint over
a coat of zinc chromate yellow primer (of
approved quality ) on the outside surface of the
cistern, flush pipe, other fittings, etc. complete
for new work.
1.00 No. 398.80 Each 399.00
872 Re-painting C.I. cistern with bitumastic or any
other anti-corrosive paint inside and white
paint on the outside surface of the cistern, flush
pipe, other fittings, etc. complete including
polishing of wooden seat and lid and cleaning
of W.C. pan with acid wherever necessary.
1.00 No. 281.60 Each 282.00
873 Repainting C.I. cistern with synthetic enamel
paint of approved colour, brand and
manufacture on the outside surface of cistern,
flush pipe, other fittings etc. complete.
1.00 No. 118.85 Each 119.00
874 Painting sand cast iron/ centrifugally cast (spun)
iron soil, waste vent pipes and fittings with two
coats of synthetic enamel paint of any colour
such as chocolate grey, or buff etc. over a coat
of primer (of approved quality) for new work :
a) 100 mm diameter pipe 1.00 m 33.85 One Running
Metre
34.00
b) 75 mm diameter pipe 1.00 m 25.90 One Running
Metre
26.00
875 Repainting sand cast iron/ centrifugally cast iron
(spun) iron, soil, waste, vent pipes and fittings
with one coat of synthetic enamel paint of any
colour such as chocolate, grey or buff etc :
a) 100 mm diameter pipe 1.00 m 16.70 One Running
Metre
17.00
b) 75 mm diameter pipe 1.00 m 12.55 One Running
Metre
13.00
876 Repainting bath tub of size 1700x730x430 mm
with enamel paint.
1.00 No. 371.65 Each 372.00
877 Providing and fixing vitreous china dual purpose
closet suitable for use as squatting pan or
European type water closet (Anglo Indian W.C
pan) with seat & lid fixed with C.P. brass hinges
and rubber buffers, 10 litre low level flushing
cistern with fitting and brackets, 40mm flush
bend, 20mm over flow pipe, with specials of
standard make and mosquito proof coupling of
approved municipal design complete, including
painting of fittings and brackets, cutting and
making good the walls and floors wherever
required :
a) White vitreous china dual purpose WC pan with
white solid plastic seat and lid with white
vitreous china flushing cistern and C.P. flush
bend.
1.00 No. 6316.05 Each 6316.00
878 Providing and fixing PTMT Waste Coupling for
wash basin and sink, of approved quality and
colour.
a) Waste coupling 31 mm dia of 79 mm length and
62 mm breadth weighing not less than 45 gms.
1.00 No. 99.30 Each 99.00
b) Waste coupling 38 mm dia of 83 mm length and
77 mm breadth, weighing not less than 60 gms.
1.00 No. 114.40 Each 114.00
879 Providing and fixing PTMT Bottle Trap for Wash
basin and sink.
a) Bottle trap 31 mm single piece moulded with
height of 270 mm, effective length of tail pipe
260 mm from the centre of the waste coupling
77 mm breadth with 25 mm minimum water
seal, weighing not less than 260 gms.
1.00 No. 408.25 Each 408.00
b) Bottle trap 38 mm single piece moulded with
height of 270 mm, effective length of tail pipe
260 mm from the centre of the waste coupling
77 mm breadth with 25 mm minimum water
seal, weighing not less than 263 gms.
1.00 No. 440.75 Each 441.00
880 Providing and fixing PTMT liquid soap container
109 mm wide, 125 mm high and 112 mm
distance from wall of standard shape with
bracket of the same materials with snap fittings
of approved quality and colour, weighing not
less than 105 gms.
1.00 No. 181.75 Each 182.00
881 Providing and fixing PTMT towel ring
trapezoidal shape 215 mm long, 200 mm wide
with a minimum distances of 37 mm from wall
face with concealed fittings arrangement of
approved quality and colour, weighing not less
than 88 gms.
1.00 No. 174.80 Each 175.00
882 Providing and fixing PTMT towel rail complete
with brackets fixed to wooden cleats with CP
brass screws with concealed fittings
arrangement of approved quality and colour.
a) 450 mm long towel rail with total length of 495
mm, 78 mm wide and effective height of 88
mm, weighing not less than 170 gms.
1.00 No. 408.90 Each 409.00
b) 600 mm long towel rail with total length of 645
mm, width 78 mm and effective height of 88
mm, weighing not less than 190 gms.
1.00 No. 448.40 Each 448.00
883 Providing and fixing PTMT shelf 440 mm long,
124 mm width and 36 mm height of approved
quality and colour. Weighing not less than 300
gms.
1.00 No. 485.55 Each 486.00
884 Providing and fixing PTMT 15 mm Urinal
spreader size 95x69x100 mm with 1/2" BSP
thread and shapes. Weighing not less than 60
gms.
1.00 No. 160.85 Each 161.00
885 Providing and fixing PTMT urinal cock of
approved quality and colour.
a) 15 mm nominal bore, 80 mm long. 42 mm high
and 30 mm wide with BSP female threads
weighing not less than 48 gms.
1.00 No. 155.30 Each 155.00
886 Providing and fixing M.S. holder bat clamp of
approved design to sand cast iron/ cast iron
(spun) pipes comprising of M.S. flat brackets
made of 50x5 mm flat of specified shape,
projecting 75 mm outside the wall surface and
fixed on wall with 4nos, 6mm dia expansion
hold fasteners, including drilling necessary
holes in brick wall/ CC/ RCC surface and the
cost of bolts etc. The pipes shall be fixed to the
already fixed brackets with the help of 30 mm
x1.6 mm galvanised M.S. flats of specified
shape and of total length 420 mm and shall be
fixed with M.S. nuts, bolts, & washers of size
25x6 mm, one bolts on each side of the pipe.
a) Total bracket length 580 mmof approved shape
and design (for single 100 mm dia pipe).
1.00 No. 193.35 Each 193.00
b) Total bracket length 810 mmof approved shape
and design (for two 100 mm dia pipes).
1.00 No. 235.30 Each 235.00
c) Total bracket length 1040 mm of approved
shape and design (for three 100 mm dia pipes).
1.00 No. 277.15 Each 277.00
extended wall mounting water closet of size
780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern
with dual flush fitting, of flushing capacity 3
litre/6 litre (adjustable to 4 litre/8 litres),
including seat cover, and cistern fittings, nuts,
bolts and gasket etc complete.
1.00 No. 9965.25 Each 9965.00
888 Providing & fixing white vitreous china water
less urinal of size 600 x 330 x 315 mm having
antibacterial /germs free ceramic surface, fixed
with cartridge having debris catcher and
hygiene seal.
1.00 No. 21791.65 Each 21792.00
battery based infrared sensor operated urinal of
approx. size 610 x 390 x 370 mm having pre &
post flushing with water ( 250 ml & 500 ml
consumption), having water inlet from back
side, including fixing to wall with suitable
brackets all as per manufacturers specification
and direction of Engineer-in-charge..
1.00 No. 16681.05 Each 16681.00
325113.00 Total of the Sub-Head - Sanitary I nstallations :
Sub-Head : Water Supply
890 Providing and fixing Polyethylene- Aluminium-
Polyethylene (PE-AL- PE) Composite Pressure
Pipes conforming to IS - 15450, U.V. stabilized
with carbon black having thermal stability for
hot & cold water supply, capable to withstand
temperature up to 80C, including all special
fittings of composite material (engineering
plastic blend and brass inserts wherever
required) e.g. elbows, tees, reducers, couplers
& connectors etc. with clamps at 1.00 metre
spacing. This includes testing of joints complete
as per direction of the Engineer- in -charge.
Internal work - Exposed on wall.
a) 1216 (16 mm OD) pipe 1.00 metre 209.50 One Running
Metre
210.00
b) 1620 (20 mm OD) pipe 1.00 metre 261.50 One Running
Metre
262.00
c) 2025 (25 mm OD) pipe 1.00 metre 321.05 One Running
Metre
321.00
d) 2532 (32 mm OD) pipe 1.00 metre 400.30 One Running
Metre
400.00
e) 3240 (40 mm OD) pipe 1.00 metre 629.60 One Running
Metre
630.00
f) 4050 (50 mm OD) pipe 1.00 metre 682.45 One Running
Metre
682.00
891 Providing and fixing Polyethylene- Aluminium -
temperature up to 80C, including all special
required) e.g. elbows, tees, reducers, couplers
& connectors etc. with clamps at 1.00 metre
spacing. This includes the costs of cutting
chases and including testing of joints complete
as per direction of the engineer in charge.
Concealed work, including cutting chases and
making good the wall etc.
a) 1216 (16mm OD) pipe 1.00 metre 336.25 One Running
Metre
336.00
b) 1620 (20 mm OD) pipe 1.00 metre 379.25 One Running
Metre
379.00
c) 2025 (25 mm OD) pipe 1.00 metre 468.40 One Running
Metre
468.00
d) 2532 (32 mm OD) pipe 1.00 metre 559.85 One Running
Metre
560.00
892 Providing and fixing Polyethylene- Aluminium-
temperature up to 80C including all special
required ) e.g. elbows, tees, reducers, couplers
& connectors etc. with trenching, refilling and
testing of joints complete as per direction of the
engineer in charge : External work
a) 1216 (16 mm OD) pipe 1.00 metre 198.15 One Running
Metre
198.00
b) 1620 (20 mm OD ) pipe. 1.00 metre 243.45 One Running
Metre
243.00
c) 2025 (25 mm OD ) pipe. 1.00 metre 296.30 One Running
Metre
296.00
d) 2532 (32 mm OD ) pipe. 1.00 metre 364.25 One Running
Metre
364.00
e) 3240 (40 mm OD ) pipe. 1.00 metre 577.60 One Running
Metre
578.00
f) 4050 (50 mm OD ) pipe. 1.00 metre 630.45 One Running
Metre
630.00
893 Providing and fixing 3 layer PP-R (Polypropylene
Random copolymer) pipes SDR 7.4 U V
stabilized & anti - microbial fusion welded,
having thermal stability for hot & cold water
supply, including all PP - R plain & brass
threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing.
This includes testing of joints complete as per
direction of Engineer in Charge. : Internal work -
Exposed on wall.
a) PN - 16 Pipe, 16 mm OD 1.00 metre 121.90 One Running
Metre
122.00
b) PN - 16 Pipe, 20 mm OD 1.00 metre 158.80 One Running
Metre
159.00
c) PN - 16 Pipe, 25 mm OD 1.00 metre 212.35 One Running
Metre
212.00
d) PN - 16 Pipe, 32 mm OD 1.00 metre 305.20 One Running
Metre
305.00
e) PN - 16 Pipe, 40 mm OD 1.00 metre 437.85 One Running
Metre
438.00
f) PN - 16 Pipe, 50 mm OD 1.00 metre 619.05 One Running
Metre
619.00
894 Providing and fixing 3 layer PP-R (Poly
propylene Random copolymer) pipes SDR 7.4 U
V stabilized & anti - microbial fusion welded,
having thermal stability for hot & cold water
supply, including all PP - R plain & brass
threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing.
This includes the cost of cutting chases and
making good the same including testing of
joints complete as per direction of Engineer in
Charge. Concealed work, including cutting
chases and making good the walls etc.,
a) PN - 16 Pipe, 16 mm OD 1.00 metre 218.35 One Running
Metre
218.00
b) PN - 16 Pipe, 20 mm OD 1.00 metre 259.00 One Running
Metre
259.00
c) PN - 16 Pipe, 25 mm OD 1.00 metre 322.05 One Running
Metre
322.00
d) PN - 16 Pipe, 32 mm OD 1.00 metre 431.80 One Running
Metre
432.00
895 Providing and fixing 3 layer PP-R (Polypropylene
Random copolymer) pipes, U V stabilized & anti -
microbial fusion welded, having thermal
stability for hot & cold water supply, including
all PP -R plain & brass threaded polypropylene
random fittings, including trenching , refilling &
testing of joints complete as per direction of
Engineer in Charge. : External work
a) PN - 16 Pipe, 16 mm OD (SDR 7.4) 1.00 metre 110.60 One Running
Metre
111.00
b) PN - 16 Pipe, 20 mm OD (SDR 7.4) 1.00 metre 140.75 One Running
Metre
141.00
c) PN - 16 Pipe, 25 mm OD (SDR 7.4) 1.00 metre 192.50 One Running
Metre
193.00
d) PN - 16 Pipe, 32 mm OD (SDR 7.4) 1.00 metre 274.05 One Running
Metre
274.00
e) PN - 16 Pipe, 40 mm OD (SDR 7.4) 1.00 metre 385.85 One Running
Metre
386.00
f) PN - 16 Pipe, 50 mm OD (SDR 7.4) 1.00 metre 567.05 One Running
Metre
567.00
g) PN - 16 Pipe, 63mm OD (SDR 7.4) 1.00 metre 854.30 One Running
Metre
854.00
h) PN - 16 Pipe, 75 mm OD (SDR 7.4) 1.00 metre 1136.70 One Running
Metre
1137.00
i) PN - 16 Pipe, 90 mm OD (SDR 7.4) 1.00 metre 1715.15 One Running
Metre
1715.00
j) PN - 10 Pipe, 110 mm OD (SDR - 11) 1.00 metre 1917.50 One Running
Metre
1918.00
k) PN - 10 Pipe, 160 mm OD (SDR - 11) 1.00 metre 3937.25 One Running
Metre
3937.00
896 Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing
the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of joints
complete as per direction of Engineer in Charge.
: Internal work - Exposed on wall
a) 15 mm nominal outer dia.Pipes. 1.00 metre 155.80 One Running
Metre
156.00
b) 20 mm nominal outer dia.Pipes. 1.00 metre 182.15 One Running
Metre
182.00
c) 25 mm nominal outer dia .Pipes. 1.00 metre 222.90 One Running
Metre
223.00
d) 32 mm nominal outer dia.Pipes. 1.00 metre 287.10 One Running
Metre
287.00
e) 40 mm nominal outer dia.Pipes. 1.00 metre 395.60 One Running
Metre
396.00
f) 50 mm nominal outer dia.Pipes. 1.00 metre 569.20 One Running
Metre
569.00
for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the
pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of
cutting chases and making good the same
including testing of joints complete as per
direction of Engineer in Charge. :Concealed
work, including cutting chases and making good
the walls etc.
a) 15 mm nominal outer dia .Pipes. 1.00 metre 254.95 One Running
Metre
255.00
b) 20 mm nominal outer dia .Pipes. 1.00 metre 281.35 One Running
Metre
281.00
c) 25 mm nominal outer dia .Pipes. 1.00 metre 336.25 One Running
Metre
336.00
d) 32 mm nominal outer dia .Pipes. 1.00 metre 407.40 One Running
Metre
407.00
for hot & cold water supply including all CPVC
plain & brass threaded fittings. This includes
jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in
Charge : External work
a) 15 mm nominal outer dia. Pipes. 1.00 metre 137.75 One Running
Metre
138.00
b) 20 mm nominal outer dia. Pipes. 1.00 metre 157.40 One Running
Metre
157.00
c) 25 mm nominal outer dia. Pipes. 1.00 metre 203.10 One Running
Metre
203.00
d) 32 mm nominal outer dia. Pipes. 1.00 metre 255.95 One Running
Metre
256.00
e) 40 mm nominal outer dia. Pipes. 1.00 metre 343.55 One Running
Metre
344.00
f) 50 mm nominal outer dia. Pipes. 1.00 metre 517.20 One Running
Metre
517.00
g) 62.50 mm nominal inner dia. Pipes. 1.00 metre 1453.75 One Running
Metre
1454.00
h) 75 mm nominal inner dia. Pipes. 1.00 metre 2042.65 One Running
Metre
2043.00
i) 100mm nominal inner dia. Pipes. 1.00 metre 2823.45 One Running
Metre
2823.00
j) 150 mm nominal inner dia. Pipes. 1.00 metre 3408.80 One Running
Metre
3409.00
899 Providing and fixing G.I. pipes complete with
G.I. fittings and clamps, i/c cutting and making
good the walls etc. : Internal work Exposed on
wall.
a) 15 mm dia. nominal bore 1.00 metre 181.35 One Running
Metre
181.00
b) 20 mm dia. nominal bore 1.00 metre 221.50 One Running
Metre
222.00
c) 25 mm dia. nominal bore 1.00 metre 282.30 One Running
Metre
282.00
d) 32 mm dia. nominal bore 1.00 metre 333.50 One Running
Metre
334.00
e) 40 mm dia. nominal bore 1.00 metre 413.25 One Running
Metre
413.00
f) 50 mm dia. nominal bore 1.00 metre 512.10 One Running
Metre
512.00
900 Providing and fixing G.I. Pipes complete with
G.I. fittings and clamps, i/c making good the
walls etc. concealed pipe including painting
with anticorrosive bitumastic paint, cutting
chases and making good the wall:
Metre
264.00
Metre
298.00
901 Providing and fixing G.I. pipes complete with
G.I. fittings including trenching and refilling etc.
: External work
Metre
157.00
Metre
186.00
c) 25 mm dia. nominal bore 1.00 metre 238.95 One Running
Metre
239.00
d) 32 mm dia. nominal bore 1.00 metre 274.60 One Running
Metre
275.00
e) 40 mm dia. nominal bore 1.00 metre 327.15 One Running
Metre
327.00
f) 50 mm dia. nominal bore 1.00 metre 392.50 One Running
Metre
393.00
g) 65 mm dia. nominal bore 1.00 metre 515.55 One Running
Metre
516.00
h) 80 mm dia. nominal bore 1.00 metre 628.35 One Running
Metre
628.00
902 Making connection of G.I. distribution branch
with G.I. main of following sizes by providing
and fixing tee, including cutting and threading
the pipe etc. complete :
a) 25 to 40 mm nominal bore 1.00 No. 338.90 Each 339.00
b) 50 to 80 mm nominal bore 1.00 No. 721.95 Each 722.00
903 Fixing water meter and stop cock in G.I. pipe
line including cutting and threading the pipe
and making long screws etc. complete (cost of
water meter and stop cock to be paid
separately).
1.00 No. 286.60 Each 287.00
904 Providing and fixing brass bib cock of approved
quality :
a) 15 mm nominal bore 1.00 No. 259.85 Each 260.00
b) 20 mm nominal bore 1.00 No. 280.05 Each 280.00
905 Providing and fixing brass stop cock of
approved quality :
906 Providing and fixing gun metal gate valve with
C.I. wheel of approved quality (screwed end) :
b) 32 mm nominal bore. 1.00 No. 500.35 Each 500.00
c) 40 mm nominal bore 1.00 No. 584.20 Each 584.00
d) 50 mm nominal bore 1.00 No. 749.40 Each 749.00
e) 65 mm nominal bore 1.00 No. 1286.25 Each 1286.00
f) 80 mm nominal bore 1.00 No. 1918.85 Each 1919.00
907 Providing and fixing ball valve (brass) of
approved quality, High or low pressure, with
plastic floats complete :
908 Providing and fixing gun metal non- return valve
of approved quality (screwed end) :
a) 25 mm nominal bore
(i) Horizontal 1.00 No. 410.00 Each 410.00
(ii) Vertical 1.00 No. 444.85 Each 445.00
b) 32 mm nominal bore
c) 40 mm nominal bore
d) 50 mm nominal bore
e) 65 mm nominal bore
f) 80 mm nominal bore
909 Providing and fixing brass ferrule with C.I.
mouth cover including boring and tapping the
main :
910 Providing and fixing uplasticised PVC
connection pipe with brass unions :
a) 30 cm length
(i) 15 mm nominal bore 1.00 No. 58.95 Each 59.00
(ii) 20 mm nominal bore 1.00 No. 64.80 Each 65.00
b) 45 cm length
(i) 15 mm nominal bore 1.00 No. 67.35 Each 67.00
(ii) 20 mm nominal bore 1.00 No. 82.45 Each 82.00
911 Providing and fixing C.P. brass shower rose with
15 or 20 mm inlet :
a) 100 mm diameter 1.00 No. 71.40 Each 71.00
b) 150 mm diameter 1.00 No. 85.60 Each 86.00
912 Laying in position centrifugally cast (spun) iron
S&S or flanged pipes (excluding cost of pipe)
1.00 Qtl 124.40 One Quintal 124.00
913 Laying in position S&S or flanged C.I. special
such as tees, bends, collars, tapers and caps
etc.(excluding cost of specials).
1.00 Qtl 231.35 One Quintal 231.00
914 Providing and laying S&S C.I. standard specials
such as tees, bends, collars, tapers, caps etc.
(Heavy class) :
a) Up to 300 mm dia. 1.00 Qtl 4423.75 One Quintal 4424.00
b) Over 300 mm dia. 1.00 Qtl 4539.90 One Quintal 4540.00
915 Providing and laying flanged C.I. standard
specials such as tees, bends, collars, tapers,
caps etc., suitable for flanged jointing as per IS :
1538 :
a) Up to 300 mm dia. 1.00 Qtl 6630.60 One Quintal 6631.00
b) Over 300 mm dia. 1.00 Qtl 6979.05 One Quintal 6979.00
916 Providing and laying S&S centrifugally cast
(spun) iron pipes (Class LA) conforming to IS -
1536 :
a) 100 mm dia. pipe 1.00 metre 1072.70 One Running
Metre
1073.00
b) 125 mm dia. pipe 1.00 metre 1336.60 One Running
Metre
1337.00
c) 150 mm dia. pipe 1.00 metre 1612.60 One Running
Metre
1613.00
d) 200 mm dia. pipe 1.00 metre 2737.40 One Running
Metre
2737.00
e) 250 mm dia. pipe 1.00 metre 3573.95 One Running
Metre
3574.00
f) 300 mm dia. pipe 1.00 metre 4818.75 One Running
Metre
4819.00
g) 350 mm dia. pipe 1.00 metre 5779.60 One Running
Metre
5780.00
h) 400 mm dia. pipe 1.00 metre 7614.35 One Running
Metre
7614.00
i) 450 mm dia. pipe 1.00 metre 9219.95 One Running
Metre
9220.00
j) 500 mm dia. pipe 1.00 metre 10703.95 One Running
Metre
10704.00
k) 600 mm dia. pipe 1.00 metre 14967.80 One Running
Metre
14968.00
917 Providing lead caulked joints to spun iron or C.I.
pipes and specials, including testing of joints
but excluding the cost of pig lead :
a) 100 mm diameter pipe 1.00 No. 187.10 Each 187.00
b) 125 mm diameter pipe 1.00 No. 275.70 Each 276.00
c) 150 mm diameter pipe 1.00 No. 280.85 Each 281.00
d) 200 mm diameter pipe 1.00 No. 372.40 Each 372.00
e) 250 mm diameter pipe 1.00 No. 465.30 Each 465.00
f) 300 mm diameter pipe 1.00 No. 560.60 Each 561.00
g) 350 mm diameter pipe 1.00 No. 578.15 Each 578.00
h) 400 mm diameter pipe 1.00 No. 753.80 Each 754.00
i) 450 mm diameter pipe 1.00 No. 844.85 Each 845.00
j) 500 mm diameter pipe 1.00 No. 894.30 Each 894.00
k) 600 mm diameter pipe 1.00 No. 1205.25 Each 1205.00
918 Supplying pig lead at site of work. 1.00 Qtl 10464.50 One Quintal 10465.00
919 Providing flanged joints to double flanged C.I./
D.I. pipes and specials, including testing of
joints :
a) 80 mm diameter pipe 1.00 No. 114.45 Each 114.00
b) 100 mm diameter pipe 1.00 No. 189.60 Each 190.00
c) 125 mm diameter pipe 1.00 No. 191.95 Each 192.00
d) 150 mm diameter pipe 1.00 No. 227.65 Each 228.00
e) 200 mm diameter pipe 1.00 No. 233.45 Each 233.00
f) 250 mm diameter pipe 1.00 No. 350.40 Each 350.00
g) 300 mm diameter pipe 1.00 No. 356.20 Each 356.00
h) 350 mm diameter pipe 1.00 No. 489.15 Each 489.00
i) 400 mm diameter pipe 1.00 No. 702.25 Each 702.00
j) 450 mm diameter pipe 1.00 No. 870.10 Each 870.00
k) 500 mm diameter pipe 1.00 No. 991.75 Each 992.00
l) 600 mm diameter pipe 1.00 No. 1164.50 Each 1165.00
920 Providing and fixing C.I. sluice valves (with cap)
complete with bolts, nuts, rubber insertions etc.
(the tail pieces if required will be paid
separately) :
a) 100 mm diameter
(i) Class I 1.00 No. 3285.75 Each 3286.00
(ii) Class II 1.00 No. 3895.60 Each 3896.00
b) 125 mm diameter
(i) Class I 1.00 No. 3540.20 Each 3540.00
c) 150 mm diameter
(i) Class I 1.00 No. 4812.35 Each 4812.00
d) 200 mm diameter
(i) Class I 1.00 No. 9472.65 Each 9473.00
e) 250 mm diameter
(i) Class I 1.00 No. 13890.10 Each 13890.00
f) 300 mm diameter
(i) Class I 1.00 No. 19303.10 Each 19303.00
921 Constructing masonry Chamber 30x30x50 cm
inside, in brick work in cement mortar 1:4 (1
cement :4 coarse sand) for stop cock, with C. I.
surface box 100x100 x75 mm (inside) with
hinged cover fixed in cement concrete slab
1:2:4 mix (1 cement :2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), i/c
necessary excavation, foundation concrete
1:5:10 ( 1 cement :5 fine sand:10 graded stone
aggregate 40mm nominal size ) and inside
plastering with cement mortar 1:3 (1 cement :3
coarse sand) 12mm thick finished with a
floating coat of neat cement complete as per
standard design :
1.00 No. 1101.70 Each 1102.00
cement : 4 coarse sand) for sluice valve, with
C.I. surface box 100 mm top diameter, 160 mm
bottom diameter and 180 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix
(1cement :2 coarse sand : 4 graded stone
aggregate 20mm nominal size ) , i/c necessary
excavation, foundation concrete 1:5:10
(1cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick finished with a
standard design :
1.00 No. 6441.05 Each 6441.00
bottom diameter and 180 mm deep (inside)
with chained lid and RCC top slab 1:2:4 mix
(1cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size ), i/c necessary
excavation, foundation concrete 1:5:10
(1cement : 5 fine sand:10 graded stone
standard design :
1.00 No. 11128.55 Each 11129.00
924 Constructing masonry Chamber 120x120x100
cm inside, in brick work in cement mortar 1:4 (1
bottom diameter and 180 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix (1
cement :2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) , i/c necessary
excavation, foundation concrete1:5:10 (1
cement : 5 fine sand : 10 graded stone
plastering with cement mortar 1:3 (1 cement: 3
standard design :
1.00 No. 15305.40 Each 15305.00
925 Constructing masonry Chamber 60x60x75 cm,
inside in brick work in cement mortar 1:4 (1
cement : 4 coarse sand) for fire hydrants, with
C.I. surface box 350x350 mm top and 165 mm
deep ( inside) with chained lid and RCC top slab
1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) , i/c
necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone
standard design :
1.00 No. 6140.50 Each 6141.00
cement : 4 coarse sand) for water meter
complete with C.I. double flap surface box
400x200x200 mm (inside) with locking
arrangement and RCC top slab 1:2:4 mix (1
aggregate 20 mm nominal size) , i/c necessary
excavation, foundation concrete 1:5:10 ( 1
cement : 5 fine sand:10 graded stone aggregate
40 mm nominal size) and inside plastering with
12 mm thick finished with a floating coat of
neat cement complete as per standard design :
1.00 No. 5737.40 Each 5737.00
927 Painting G.I. pipes and fittings with synthetic
enamel white paint with two coats over a ready
mixed priming coat, both of approved quality
for new work :
a) 15 mm diameter pipe. 1.00 metre 8.60 One Running
Metre
9.00
b) 20 mm diameter pipe. 1.00 metre 10.10 One Running
Metre
10.00
c) 25 mm diameter pipe. 1.00 metre 13.35 One Running
Metre
13.00
d) 32 mm diameter pipe. 1.00 metre 15.75 One Running
Metre
16.00
e) 40 mm diameter pipe. 1.00 metre 18.70 One Running
Metre
19.00
f) 50 mm diameter pipe. 1.00 metre 22.00 One Running
Metre
22.00
928 Repainting G.I. pipes and fittings with synthetic
enamel white paint with one coat of approved
quality :
a) 15 mm diameter pipe. 1.00 metre 4.40 One Running
Metre
4.00
b) 20 mm diameter pipe. 1.00 metre 5.10 One Running
Metre
5.00
c) 25 mm diameter pipe 1.00 metre 6.50 One Running
Metre
7.00
d) 32 mm diameter pipe 1.00 metre 7.65 One Running
Metre
8.00
e) 40 mm diameter pipe 1.00 metre 8.95 One Running
Metre
9.00
f) 50 mm diameter pipe 1.00 metre 10.50 One Running
Metre
11.00
929 Painting G.I. pipes and fittings with two coats of
anti-corrosive bitumastic paint of approved
quality :
a) 15 mm diameter pipe 1.00 metre 5.25 One Running
Metre
5.00
b) 20 mm diameter pipe 1.00 metre 6.15 One Running
Metre
6.00
Metre
8.00
Metre
9.00
Metre
11.00
Metre
13.00
g) 65 mm diameter pipe 1.00 metre 15.60 One Running
Metre
16.00
h) 80 mm diameter pipe 1.00 metre 18.05 One Running
Metre
18.00
930 Providing and filling sand of grading zone V or
coarser grade all- round the G.I. pipes in
external work.
a) 15 mm diameter pipe 1.00 metre 61.55 One Running
Metre
62.00
b) 20 mm diameter pipe 1.00 metre 62.40 One Running
Metre
62.00
Metre
64.00
Metre
66.00
Metre
67.00
Metre
69.00
g) 65 mm diameter pipe 1.00 metre 108.95 One Running
Metre
109.00
h) 80 mm diameter pipe 1.00 metre 112.30 One Running
Metre
112.00
i) 100 mm diameter pipe 1.00 metre 118.95 One Running
Metre
119.00
j) 150 mm diameter pipe 1.00 metre 177.15 One Running
Metre
177.00
931 Boring with 100 mm diameter casing pipe for
hand pump / tube well, in all soils except
ordinary hard rocks requiring blasting, including
removing the casing pipe after the hand pump /
tube well is lowered and tested :
a) Up to 6 metres depth. 1.00 metre 300.20 One Running
Metre
300.00
b) Beyond 6 m and up to 12 m depth. 1.00 metre 356.65 One Running
Metre
357.00
c) Beyond 12 m and up to 18 m depth. 1.00 metre 415.40 One Running
Metre
415.00
932 Providing and placing in position filters of 40
mm diameter G.I. pipe with brass strainer of
approved quality.
Metre
583.00
933 Providing and fixing to filter and lowering to
proper levels 40 mm G.I. pipe for tube well
including cleaning and priming the tube well.
Metre
305.00
934 Providing and placing in position hand pump of
approved quality for 40 mm diameter G.I. pipe
complete with all accessories.
1.00 No. 893.75 Each 894.00
935 Providing and fixing G.I. Union in G.I. pipe
including cutting and threading the pipe and
making long screws etc. complete (New work)
d) 32 mm nominal 1.00 No. 231.15 Each 231.00
e) 40 mm nominal bore 1.00 No. 306.60 Each 307.00
f) 50mm nominal bore 1.00 No. 379.35 Each 379.00
g) 65mm nominal bore 1.00 No. 623.25 Each 623.00
h) 80 mm nominal bore 1.00 No. 716.15 Each 716.00
936 Providing and fixing G.I. Union in existing G.I.
pipe line, cutting and threading the pipe and
making long screws including excavation,
refilling the earth or cutting of wall and making
good the same complete wherever required :
a) 15 mm nominal bore. 1.00 No. 331.95 Each 332.00
b) 20 mm nominal bore. 1.00 No. 355.20 Each 355.00
c) 25 mm nominal bore. 1.00 No. 366.80 Each 367.00
d) 32 mm nominal bore. 1.00 No. 407.45 Each 407.00
e) 40 mm nominal bore. 1.00 No. 482.95 Each 483.00
f) 50 mm nominal bore. 1.00 No. 619.75 Each 620.00
g) 65 mm nominal bore. 1.00 No. 863.70 Each 864.00
h) 80 mm nominal bore. 1.00 No. 956.60 Each 957.00
937 Providing and placing on terrace (at all floor
levels) polyethylene water storage tank ISI :
12701 marked, with cover and suitable locking
arrangement and making necessary holes for
inlet, outlet and overflow pipes but without
fittings and the base support for tank.
1.00 Litre 6.30 One Litre 6.00
938 Providing and fixing C.P. brass bib cock of
approved quality conforming to IS:8931:
939 Providing and fixing C.P. brass long nose bib
cock of approved quality conforming to IS
standards and weighing not less than 810 gms.
940 Providing and fixing C.P. brass long body bib
cock of approved quality conforming to IS
standards and weighing not less than 690 gms.
941 Providing and fixing C.P. brass stop cock
(concealed) of standard design and of approved
make conforming to IS:8931.
942 Providing and fixing C.P. brass angle valve for
basin mixer and geyser points of approved
quality conforming to IS:8931 a) 15 mm
nominal bore
a) 15mm nominal bore 1.00 No. 506.70 Each 507.00
943 Providing and fixing PTMT bib cock of approved
quality and colour.
a) 15mm nominal bore, 86 mm long. Weighing not
less than 88 gms.
1.00 No. 132.05 Each 132.00
b) 15 mm nominal bore, 122 mm long. Weighing
not less than 99 gms.
1.00 No. 178.55 Each 179.00
c) 15 mm nominal bore, 165 mm long. Weighing
1.00 No. 201.75 Each 202.00
d) 15mm nominal bore, 90 mm long. Weighing not
less than 93 gms.
1.00 No. 184.35 Each 184.00
944 Providing and fixing PTMT stop cock of
a) 15 mm nominal bore, 86 mm long. Weighing
1.00 No. 132.05 Each 132.00
b) 20mm nominal bore, 89 mm long. Weighing not
less than 88 gms.
1.00 No. 166.90 Each 167.00
c) Concealed stop cock, 15 mm nominal bore,
108mm long. Weighing not less than 108 gms.
1.00 No. 199.45 Each 199.00
945 Providing and fixing PTMT pillar cock of
approved quality and colour .
a) 15mm nominal bore, 107 mm long. Weighing
1.00 No. 204.55 Each 205.00
b) 15mm nominal bore, 125 mm long foam flow.
Weighing not less than 120 gms.
1.00 No. 280.05 Each 280.00
946 Providing and fixing PTMT, push cock of
1.00 No. 120.45 Each 120.00
1.00 No. 108.85 Each 109.00
947 Providing and fixing PTMT grating of approved
quality and colour.
a) Circular type.
(i) 100 mm nominal dia. 1.00 No. 44.20 Each 44.00
(ii) 125 mm nominal dia with 25 mm waste hole. 1.00 No. 57.00 Each 57.00
b) Rectangular type with openable circular lid.
(i) 150 mm nominal size square 100 mm diameter
of the inner hinged round grating.
1.00 No. 149.90 Each 150.00
948 Providing and fixing C.I. double acting air valve
of approved quality with bolts, nuts, rubber
insertions etc. complete (The tail pieces, tapers
etc if required will be paid separately) :
a) 50 mm dia 1.00 No. 4773.30 Each 4773.00
b) 80 mm dia 1.00 No. 6167.10 Each 6167.00
c) 100 mm dia 1.00 No. 8103.20 Each 8103.00
949 Providing and fixing enclosed type water meter
(bulk type) conforming to IS : 2373 and tested
by Municipal Board complete with bolts, nuts,
rubber insertions etc. (The tail pieces if required
will be paid separately) :
a) 80 mm dia nominal bore 1.00 No. 3087.95 Each 3088.00
b) 100 mm dia nominal bore 1.00 No. 4622.85 Each 4623.00
c) 150 mm dia nominal bore 1.00 No. 6776.20 Each 6776.00
d) 200 mm dia nominal bore 1.00 No. 7355.05 Each 7355.00
950 Providing and fixing C.I. dirt box strainer for
bulk type water meter with nuts, bolts, rubber
insertions etc. complete conforming to IS : 2373
:
a) 80 mm dia 1.00 No. 3621.05 Each 3621.00
b) 100 mm dia. 1.00 No. 5852.90 Each 5853.00
c) 150 mm dia 1.00 No. 7408.95 Each 7409.00
d) 200 mm dia 1.00 No. 10357.30 Each 10357.00
951 Providing and fixing PTMT Ball cock of approved
quality, colour and make complete with Epoxy
coated aluminium rod with L.P./ H.P.H.D. plastic
ball.
1.00 No. 198.25 Each 198.00
1.00 No. 279.65 Each 280.00
c) 25 mm nominal bore, 152 mm long. Weighing
1.00 No. 551.50 Each 552.00
d) 40mm nominal bore, 206mm long. Weighing
1.00 No. 969.65 Each 970.00
e) 50mm nominal bore, 242 mm long. Weighing
1.00 No. 1399.40 Each 1399.00
952 Providing and fixing PTMT angle stop cock 15
mm nominal bore. Weighing not less than 85
gms.
1.00 No. 166.90 Each 167.00
953 Providing and fixing PTMT swivelling shower,
15mm nominal bore. Weighing not less than 40
gms.
1.00 No. 114.40 Each 114.00
954 Providing and fixing PTMT soap Dish Holder
having length of 138 mm, breadth 102 mm,
height of 75 mm with concealed fitting
arrangements. Weighing not less than 106 gms.
1.00 No. 152.70 Each 153.00
955 Providing and laying S&S C.I. Standard specials
such as tees, bends, collars tapers and caps etc,
suitable for flanged jointing as per IS :1538:
a) Up to 300 mm dia 1.00 Qtl 6572.55 One Quintal 6573.00
b) Above 300 mm dia 1.00 Qtl 9766.65 One Quintal 9767.00
956 Providing and laying S&S C.I. Standard specials
suitable for mechanical jointing as per IS :
13382 :
957 Providing and laying D.I. specials of class K-12
suitable for push-on jointing as per IS : 9523 :
958 Providing and laying D.I. Specials of Class K - 12
suitable for mechanical jointing as per IS : 9523
:
959 Providing push-on-joints to Centrifugally (Spun)
Cast Iron Pipes or Ductile Iron Pipes including
testing of joints and the cost of rubber gasket :
a) 100 mm dia pipes 1.00 joint 59.25 One Joint 59.00
b) 150 mm dia pipes 1.00 joint 91.10 One Joint 91.00
c) 200 mm dia pipes 1.00 joint 139.30 One Joint 139.00
d) 250 mm dia pipes 1.00 joint 168.90 One Joint 169.00
e) 300 mm dia pipes 1.00 joint 227.50 One Joint 228.00
f) 350 mm dia pipes 1.00 joint 247.25 One Joint 247.00
g) 400 mm dia pipes 1.00 joint 404.00 One Joint 404.00
h) 450 mm dia pipes 1.00 joint 466.15 One Joint 466.00
i) 500 mm dia pipes 1.00 joint 503.00 One Joint 503.00
j) 600 mm dia pipes 1.00 joint 644.90 One Joint 645.00
k) 650 mm dia pipes 1.00 joint 909.00 One Joint 909.00
l) 700 mm dia pipes 1.00 joint 1042.55 One Joint 1043.00
m) 800 mm di a pipes 1.00 joint 1148.90 One Joint 1149.00
n) 900 mm dia pipes 1.00 joint 1474.65 One Joint 1475.00
o) 1000 mm dia pipes 1.00 joint 1738.25 One Joint 1738.00
960 Providing and laying Double Flanged (screwed/
welded) Centrifugally (Spun) Cast Iron, Class B
(IS : 1536) :
a) 100 mm dia C.I. Double Flanged Pipe 1.00 m 1633.35 One Running
Metre
1633.00
b) 150 mm dia C.I. Double Flanged Pipe 1.00 m 2556.70 One Running
Metre
2557.00
c) 200 mm dia C.I. Double Flanged Pipe 1.00 m 4035.55 One Running
Metre
4036.00
d) 250 mm dia C.I. Double Flanged Pipe 1.00 m 4878.80 One Running
Metre
4879.00
e) 300 mm dia C.I. Double Flanged Pipe 1.00 m 6236.00 One Running
Metre
6236.00
f) 350 mm dia C.I. Double Flanged Pipe 1.00 m 7852.90 One Running
Metre
7853.00
g) 400 mm dia C.I. Double Flanged Pipe 1.00 m 10162.95 One Running
Metre
10163.00
h) 450 mm dia C.I. Double Flanged Pipe 1.00 m 12941.20 One Running
Metre
12941.00
i) 500 mm dia C.I. Double Flanged Pipe 1.00 m 16072.10 One Running
Metre
16072.00
j) 600 mm dia C.I. Double Flanged Pipe 1.00 m 22273.70 One Running
Metre
22274.00
961 Providing and laying S&S Centrifugally Cast
(Spun) / Ductile Iron Pipes conforming to IS :
8329 :
a) 100 mm dia Ductile Iron Class K-7 pipes 1.00 m 922.05 One Running
Metre
922.00
b) 150 mm dia Ductile Iron Class K-7 pipes 1.00 m 1333.75 One Running
Metre
1334.00
c) 200 mm dia Ductile Iron Class K-7 pipes 1.00 m 1845.10 One Running
Metre
1845.00
d) 250 mm dia Ductile Iron Class K-7 pipes 1.00 m 2498.45 One Running
Metre
2498.00
e) 300 mm dia Ductile Iron Class K-7 pipes 1.00 m 3441.45 One Running
Metre
3441.00
f) 350 mm dia Ductile Iron Class K-7 pipes 1.00 m 4101.50 One Running
Metre
4102.00
g) 400 mm dia Ductile Iron Class K-7 pipes 1.00 m 4785.45 One Running
Metre
4785.00
h) 450 mm dia Ductile Iron Class K-7 pipes 1.00 m 5779.40 One Running
Metre
5779.00
i) 500 mm dia Ductile Iron Class K-7 pipes 1.00 m 6823.90 One Running
Metre
6824.00
j) 600 mm dia Ductile Iron Class K-7 pipes 1.00 m 8905.55 One Running
Metre
8906.00
k) 700 mm dia Ductile Iron Class K-7 pipes 1.00 m 11445.60 One Running
Metre
11446.00
l) 800 mm dia Ductile Iron Class K-7 pipes 1.00 m 14402.20 One Running
Metre
14402.00
m) 900 mm dia Ductile Iron Class K-7 pipes 1.00 m 19084.65 One Running
Metre
19085.00
n) 1000 mm dia Ductile Iron Class K-7 pipes 1.00 m 20306.10 One Running
Metre
20306.00
o) 100 mm dia Ductile Iron Class K-9 pipes 1.00 m 954.00 One Running
Metre
954.00
p) 150 mm dia Ductile Iron Class K-9 pipes 1.00 m 1431.00 One Running
Metre
1431.00
q) 200 mm dia Ductile Iron Class K-9 pipes 1.00 m 1968.80 One Running
Metre
1969.00
r) 250 mm dia Ductile Iron Class K-9 pipes 1.00 m 2741.60 One Running
Metre
2742.00
s) 300 mm dia Ductile Iron Class K-9 pipes 1.00 m 3410.05 One Running
Metre
3410.00
t) 350 mm dia Ductile Iron Class K-9 pipes 1.00 m 4194.10 One Running
Metre
4194.00
u) 400 mm dia Ductile Iron Class K-9 pipes 1.00 m 5369.30 One Running
Metre
5369.00
v) 450 mm dia Ductile Iron Class K-9 pipes 1.00 m 6207.95 One Running
Metre
6208.00
w) 500 mm dia Ductile Iron Class K-9 pipes 1.00 m 7833.85 One Running
Metre
7834.00
x) 600 mm dia Ductile Iron Class K-9 pipes 1.00 m 9465.65 One Running
Metre
9466.00
y) 700 mm dia Ductile Iron Class K-9 pipes 1.00 m 13077.20 One Running
Metre
13077.00
z) 750 mm dia Ductile Iron Class K-9 pipes 1.00 m 14191.35 One Running
Metre
14191.00
{) 800 mm dia Ductile Iron Class K-9 pipes 1.00 m 14360.50 One Running
Metre
14361.00
|) 900 mm dia Ductile Iron Class K-9 pipes 1.00 m 17331.70 One Running
Metre
17332.00
}) 1000 mm dia Ductile Iron Class K-9 pipes 1.00 m 19495.70 One Running
Metre
19496.00
962 Providing and laying Double Flanged (Screwed/
Welded) Centrifugally (Spun) Ductile Iron Pipes
of Class K - 9 conforming to IS: 8329 :
a) 100 mm dia Ductile Iron Double Flanged 1.00 m 2561.90 One Running
Metre
2562.00
b) 150 mm dia Ductile Iron Double Flanged 1.00 m 4110.30 One Running
Metre
4110.00
c) 200 mm dia Ductile Iron Double Flanged 1.00 m 4836.10 One Running
Metre
4836.00
d) 250 mm dia Ductile Iron Double Flanged 1.00 m 4062.45 One Running
Metre
4062.00
e) 300 mm dia Ductile Iron Double Flanged 1.00 m 8192.00 One Running
Metre
8192.00
f) 350 mm dia Ductile Iron Double Flanged 1.00 m 10352.95 One Running
Metre
10353.00
g) 400 mm dia Ductile Iron Double Flanged 1.00 m 12482.50 One Running
Metre
12483.00
h) 450 mm dia Ductile Iron Double Flanged 1.00 m 15172.40 One Running
Metre
15172.00
i) 500 mm dia Ductile Iron Double Flanged 1.00 m 17752.80 One Running
Metre
17753.00
j) 600 mm dia Ductile Iron Double Flanged 1.00 m 24254.40 One Running
Metre
24254.00
k) 700 mm dia Ductile Iron Double Flanged 1.00 m 30081.70 One Running
Metre
30082.00
963 Providing and fixing unplasticised P.V.C.
connection pipe with PTMT Nuts, collar and
bush of approved quality and colour.
a) 15 mm nominal bore with 30 cm length. 1.00 No. 61.30 Each 61.00
b) 15 mm nominal bore with 45 cm length. 1.00 No. 73.15 Each 73.00
964 Providing and fixing PTMT extension nipple for
water tank pipe, fittings of approved quality and
colour.
a) 15 mm nominal bore. Weighing not less than 32
gms.
1.00 No. 43.85 Each 44.00
b) 20mm nominal bore. Weighing not less than 40
gms.
1.00 No. 50.80 Each 51.00
c) 25mm nominal bore. Weighing not less than 62
gms.
1.00 No. 72.90 Each 73.00
965 Cutting holes up to 30x30 cm in walls including
making good the same:
bricks.
1.00 No. 196.40 Each 196.00
966 Cutting holes up to 15x15 cm in R.C.C. floors
and roofs for passing drain pipe etc. and
repairing the hole after insertion of drain pipe
etc. with cement concrete 1:2:4 (1 cement :2
nominal size), including finishing complete so as
to make it leak proof.
1.00 No. 176.30 Each 176.00
967 Making chases up to 7.5x7.5 cm in walls
including making good and finishing with
matching surface after housing G.I. pipe etc.
Metre
78.00
968 Making hole up to 20x20 cm and embedding
pipes up to 150 mm diameter in masonry and
filling with cement concrete 1:3:6 (1 cement: 3
nominal size)including disposal of malba.
Metre
119.00
969 Disinfecting C.I. water mains by flushing with
water containing bleaching powder @ 0.5 gms
per litre of water and cleaning the same with
fresh water, operation to be repeated three
times including getting the sample of water
from the disinfected main tested in the
municipal laboratory.
a) 80 mm diameter C.I. pipe 100.00 m 638.30 100 Metre 638.00
b) 100 mm diameter C.I. pipe 100.00 m 840.50 100 Metre 841.00
c) 125 mm diameter C.I. pipe 100.00 m 1052.85 100 Metre 1053.00
d) 150 mm diameter C.I. pipe 100.00 m 1267.80 100 Metre 1268.00
e) 200 mm diameter C.I. pipe 100.00 m 1700.25 100 Metre 1700.00
f) 250 mm diameter C.I. pipe 100.00 m 2150.90 100 Metre 2151.00
g) 300 mm diameter C.I. pipe 100.00 m 2411.00 100 Metre 2411.00
h) 350 mm diameter C.I. pipe 100.00 m 2682.85 100 Metre 2683.00
i) 400 mm diameter C.I. pipe 100.00 m 2973.05 100 Metre 2973.00
j) 450 mm diameter C.I. pipe 100.00 m 3270.30 100 Metre 3270.00
k) 500 mm diameter C.I. pipe 100.00 m 2586.35 100 Metre 2586.00
l) 600 mm diameter C.I. pipe 100.00 m 4237.45 100 Metre 4237.00
970 Extra for every operation of disinfecting the C.I.
main by flushing with water containing
bleaching powder @ 0.5 gms per litre of water
and cleaning the same with fresh water,
including getting the samples of water tested in
the municipal laboratory:
a) 80 mm diameter C.I. pipe 100.00 m 234.05 100 Metre 234.00
b) 100 mm diameter C.I. pipe 100.00 m 286.50 100 Metre 287.00
c) 125 mm diameter C.I. pipe 100.00 m 351.05 100 Metre 351.00
d) 150 mm diameter C.I. pipe 100.00 m 410.95 100 Metre 411.00
e) 200 mm diameter C.I. pipe 100.00 m 627.25 100 Metre 627.00
f) 250 mm diameter C.I. pipe 100.00 m 725.45 100 Metre 725.00
g) 300 mm diameter C.I. pipe 100.00 m 820.15 100 Metre 820.00
h) 350 mm diameter C.I. pipe 100.00 m 966.35 100 Metre 966.00
i) 400 mm diameter C.I. pipe 100.00 m 1115.10 100 Metre 1115.00
j) 450 mm diameter C.I. pipe 100.00 m 1269.70 100 Metre 1270.00
k) 500 mm diameter C.I. pipe 100.00 m 1426.05 100 Metre 1426.00
l) 600 mm diameter C.I. pipe 100.00 m 1748.10 100 Metre 1748.00
971 Dismantling old C.I. pipes including excavation
and refilling trenches after taking out the pipes,
breaking lead caulked joints, melting of lead
and making into blocks including stacking of
pipes at site lead upto 50 metre:
a) 80 mm diameter C.I. pipe 1.00 m 149.15 One Running
Metre
149.00
b) 100 mm diameter C.I. pipe 1.00 m 155.30 One Running
Metre
155.00
c) 125 mm diameter C.I. pipe 1.00 m 161.10 One Running
Metre
161.00
d) 150 mm diameter C.I. pipe 1.00 m 167.15 One Running
Metre
167.00
e) 200 mm diameter C.I. pipe 1.00 m 186.30 One Running
Metre
186.00
f) 250 mm diameter C.I. pipe 1.00 m 205.10 One Running
Metre
205.00
g) 300 mm diameter C.I. pipe 1.00 m 221.55 One Running
Metre
222.00
h) 350 mm diameter C.I. pipe 1.00 m 236.90 One Running
Metre
237.00
i) 400 mm diameter C.I. pipe 1.00 m 251.10 One Running
Metre
251.00
j) 450 mm diameter C.I. pipe 1.00 m 265.75 One Running
Metre
266.00
k) 500 mm diameter C.I. pipe 1.00 m 278.50 One Running
Metre
279.00
l) 600 mm diameter C.I. pipe 1.00 m 300.90 One Running
Metre
301.00
972 Labour for cutting C.I. pipe with steel saw.
a) 80 mm diameter C.I. pipe 1.00 nos 51.65 Each cut 52.00
b) 100 mm diameter C.I. pipe 1.00 nos 69.50 Each cut 70.00
c) 125 mm diameter C.I. pipe 1.00 nos 96.90 Each cut 97.00
d) 150 mm diameter C.I. pipe 1.00 nos 130.75 Each cut 131.00
e) 200 mm diameter C.I. pipe 1.00 nos 174.40 Each cut 174.00
f) 250 mm diameter C.I. pipe 1.00 nos 216.25 Each cut 216.00
g) 300 mm diameter C.I. pipe 1.00 nos 259.95 Each cut 260.00
h) 350 mm diameter C.I. pipe 1.00 nos 301.80 Each cut 302.00
i) 400 mm diameter C.I. pipe 1.00 nos 345.20 Each cut 345.00
j) 450 mm diameter C.I. pipe 1.00 nos 387.35 Each cut 387.00
k) 500 mm diameter C.I. pipe 1.00 nos 430.75 Each cut 431.00
l) 600 mm diameter C.I. pipe 1.00 nos 512.70 Each cut 513.00
973 Providing & fixing chrome plated brass battery
based infrared sensor operated pillar cock,
having foam flow technology.
974 Providing and fixing Stainless Steel pipe and
fitting of grade AISI 304 as per JIS standard 3448
complete with press type fitting (fitting shall be
paid for separately) i/c fixing of the pipe with
clamps at 1.00 m spacing including cutting and
making good the walls including testing of joints
(The pipe length inserted in the fitting shall not
be measured for payment) Internal work -
Exposed on wall
a) 15.88 mm outer dia Pipe 1.00 m 241.70 One Running
Meter
242.00
b) 22.22 mm outer dia Pipe 1.00 m 375.85 One Running
Meter
376.00
c) 28.58 mm outer dia Pipe 1.00 m 468.85 One Running
Meter
469.00
d) 34.00 mm outer dia Pipe 1.00 m 637.20 One Running
Meter
637.00
e) 42.70 mm outer dia Pipe 1.00 m 776.50 One Running
Meter
777.00
f) 48.60 mm outer dia Pipe 1.00 m 896.00 One Running
Meter
896.00
975 Providing and fixing Stainless Steel pipe and
fitting of grade AISI 304 as per JIS standard 3448
complete with press type fitting (fitting shall be
paid for separately) i/c fixing of the pipe with
clamps at 1.00 m spacing and also including
cutting of chases and making good the walls
including testing of joints complete as per
direction of Engineer-in-charge. (The pipe
length inserted in the fitting shall not be
measured for payment) Internal work -
Concealed Pipe.
a) 15.88 mm outer dia Pipes. 1.00 m 318.80 One Running
Meter
319.00
b) 22.22 mm outer dia Pipes. 1.00 m 453.00 One Running
Meter
453.00
976 Providing and fixing required Stainless Steel
Fitting of press fit design of grade AISI 304
conforming to JWWA G116 standard with V-
profile or M-profile and with O-ring selaing
gasket of EPDM material of required dia as per
direction of Engineer-in-charge -
Coupling/Socket.
a) For 15.88 mm outer dia pipe 1.00 No. 66.20 Each 66.00
b) For 22.22 mm outer dia pipe 1.00 No. 102.20 Each 102.00
c) For 28.58 mm outer dia pipe 1.00 No. 125.45 Each 125.00
d) For 34.00 mm outer dia pipe 1.00 No. 268.30 Each 268.00
e) For 42.70 mm outer dia pipe 1.00 No. 383.30 Each 383.00
f) For 48.60 mm outer dia pipe 1.00 No. 518.05 Each 518.00
direction of Engineer-in-charge - Reducer
a) For 22.22 mm x 15.88 mm outer dia pipe 1.00 No. 119.65 Each 120.00
b) For 28.58 mm x 15.88 mm outer dia pipe 1.00 No. 163.75 Each 164.00
c) For 28.58 mm x 22.22 mm outer dia pipe 1.00 No. 168.40 Each 168.00
d) For 34.00 mm x 15.88 mm outer dia pipe 1.00 No. 271.80 Each 272.00
e) For 34.00 mm x 22.22 mm outer dia pipe 1.00 No. 275.30 Each 275.00
f) For 34.00 mm x 28.58 mm outer dia pipe 1.00 No. 275.30 Each 275.00
g) For 42.70 mm x 15.88 mm outer dia pipe 1.00 No. 417.00 Each 417.00
h) For 42.70 mm x 22.22 mm outer dia pipe 1.00 No. 420.45 Each 420.00
i) For 42.70 mm x 28.58 mm outer dia pipe 1.00 No. 420.45 Each 420.00
j) For 42.70 mm x 34.00 mm outer dia pipe 1.00 No. 449.50 Each 450.00
k) For 48.60 mm x 15.88 mm outer dia pipe 1.00 No. 543.60 Each 544.00
l) For 48.60 mm x 22.22 mm outer dia pipe 1.00 No. 545.90 Each 546.00
m) For 48.60 mm x 28.58 mm outer dia pipe 1.00 No. 550.55 Each 551.00
n) For 48.60 mm x 34.00 mm outer dia pipe 1.00 No. 556.35 Each 556.00
o) For 48.60 mm x 42.70 mm outer dia pipe 1.00 No. 606.30 Each 606.00
direction of Engineer-in-charge - Slip
Coupling/Socket
direction of Engineer-in-charge : Elbow 90
degrees
direction of Engineer-in-charge. : Reducing
Elbow 90 degrees
direction of Engineer-in-charge. : Equal Tee
d) Details of Cost for One no. 1.00 No. 716.65 Each 717.00
direction of Engineer-in-charge : Reducing Tee
g) For 42.70 mm x 15.88 mm outer dia pipe 1.00 No. 951.25 Each 951.00
h) For 42.70 mm x 22.22 mm outer dia pipe 1.00 No. 953.60 Each 954.00
i) For 42.70 mm x 28.58 mm outer dia pipe 1.00 No. 954.75 Each 955.00
j) For 42.70 mm x 34.00 mm outer dia pipe 1.00 No. 964.05 Each 964.00
k) For 48.60 mm x 15.88 mm outer dia pipe 1.00 No. 1038.40 Each 1038.00
l) For 48.60 mm x 22.22 mm outer dia pipe 1.00 No. 1060.45 Each 1060.00
m) For 48.60 mm x 28.58 mm outer dia pipe 1.00 No. 1068.60 Each 1069.00
n) For 48.60 mm x 34.00 mm outer dia pipe 1.00 No. 1112.70 Each 1113.00
o) For 48.60 mm x 42.70 mm outer dia pipe 1.00 No. 1153.35 Each 1153.00
direction of Engineer-in-charge : Male Thread
Tee
a) For 15.88 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 332.20 Each 332.00
b) For 22.22 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 399.55 Each 400.00
c) For 22.22 mm outer dia x 20 mm nominal dia
threaded
1.00 No. 427.45 Each 427.00
d) For 28.58 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 480.85 Each 481.00
e) For 28.58 mm outer dia x 20 mm nominal dia
threaded
1.00 No. 501.75 Each 502.00
f) For 28.58 mm outer dia x 25 mm nominal dia
threaded
1.00 No. 561.00 Each 561.00
g) For 34.00 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 699.20 Each 699.00
h) For 34.00 mm outer dia x 20 mm nominal dia
threaded
1.00 No. 756.15 Each 756.00
i) For 34.00 mm outer dia x 25 mm nominal dia
threaded
1.00 No. 902.50 Each 903.00
j) For 34.00 mm outer dia x 32 mm nominal dia
threaded
1.00 No. 1139.45 Each 1139.00
k) For 42.70 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 1067.40 Each 1067.00
l) For 42.70 mm outer dia x 20 mm nominal dia
threaded
1.00 No. 1092.95 Each 1093.00
m) For 42.70 mm outer dia x 25 mm nominal dia
threaded
1.00 No. 1189.40 Each 1189.00
n) For 42.70 mm outer dia x 32 mm nominal dia
threaded
1.00 No. 1320.65 Each 1321.00
o) For 42.70 mm outer dia x 40 mm nominal dia
threaded
1.00 No. 1604.05 Each 1604.00
p) For 48.60 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 1161.50 Each 1162.00
q) For 48.60 mm outer dia x 20 mm nominal dia
threaded
1.00 No. 1196.35 Each 1196.00
r) For 48.60 mm outer dia x 25 mm nominal dia
threaded
1.00 No. 1247.45 Each 1247.00
s) For 48.60 mm outer dia x 32 mm nominal dia
threaded
1.00 No. 1498.35 Each 1498.00
t) For 48.60 mm outer dia x 40 mm nominal dia
threaded
1.00 No. 1662.10 Each 1662.00
u) For 48.60 mm outer dia x 50 mm nominal dia
threaded
1.00 No. 2031.45 Each 2031.00
direction of Engineer-in-charge : Female Thread
Tee
threaded
1.00 No. 339.15 Each 339.00
threaded
1.00 No. 399.55 Each 400.00
threaded
1.00 No. 413.50 Each 414.00
threaded
1.00 No. 516.85 Each 517.00
threaded
1.00 No. 528.50 Each 529.00
threaded
1.00 No. 578.45 Each 578.00
threaded
1.00 No. 775.90 Each 776.00
threaded
1.00 No. 788.65 Each 789.00
threaded
1.00 No. 889.70 Each 890.00
threaded
1.00 No. 1056.95 Each 1057.00
threaded
1.00 No. 1038.40 Each 1038.00
threaded
1.00 No. 1056.95 Each 1057.00
m) For 42.70 mm outer dia x 25 mm nominal dia
threaded
1.00 No. 1187.05 Each 1187.00
n) For 42.70 mm outer dia x 32 mm nominal dia
threaded
1.00 No. 1239.30 Each 1239.00
o) For 42.70 mm outer dia x 40 mm nominal dia
threaded
1.00 No. 1349.65 Each 1350.00
p) For 48.60 mm outer dia x 15 mm nominal dia
threaded
1.00 No. 1237.00 Each 1237.00
q) For 48.60 mm outer dia x 20 mm nominal dia
threaded
1.00 No. 1249.75 Each 1250.00
r) For 48.60 mm outer dia x 25 mm nominal dia
threaded
1.00 No. 1295.05 Each 1295.00
s) For 48.60 mm outer dia x 32 mm nominal dia
threaded
1.00 No. 1357.20 Each 1357.00
t) For 48.60 mm outer dia x 40 mm nominal dia
threaded
1.00 No. 1432.15 Each 1432.00
u) For 48.60 mm outer dia x 50 mm nominal dia
threaded
1.00 No. 1586.60 Each 1587.00
direction of Engineer-in-charge : Female Thread
Connector/Adapter.
threaded
1.00 No. 220.70 Each 221.00
threaded
1.00 No. 267.15 Each 267.00
threaded
1.00 No. 275.30 Each 275.00
threaded
1.00 No. 321.75 Each 322.00
threaded
1.00 No. 332.20 Each 332.00
threaded
1.00 No. 391.45 Each 391.00
threaded
1.00 No. 475.05 Each 475.00
threaded
1.00 No. 624.90 Each 625.00
threaded
1.00 No. 669.00 Each 669.00
threaded
1.00 No. 791.00 Each 791.00
threaded
1.00 No. 973.35 Each 973.00
threaded
1.00 No. 1120.85 Each 1121.00
direction of Engineer-in-charge : Male Thread
Connector/Adapter
threaded
1.00 No. 224.15 Each 224.00
threaded
1.00 No. 263.65 Each 264.00
threaded
1.00 No. 288.05 Each 288.00
threaded
1.00 No. 363.55 Each 364.00
threaded
1.00 No. 371.70 Each 372.00
threaded
1.00 No. 535.45 Each 535.00
threaded
1.00 No. 656.25 Each 656.00
threaded
1.00 No. 753.80 Each 754.00
threaded
1.00 No. 843.25 Each 843.00
threaded
1.00 No. 975.65 Each 976.00
threaded
1.00 No. 1321.80 Each 1322.00
direction of Engineer-in-charge : Valve
Connector
threaded
1.00 No. 271.80 Each 272.00
threaded
1.00 No. 320.55 Each 321.00
threaded
1.00 No. 342.65 Each 343.00
threaded
1.00 No. 492.50 Each 493.00
threaded
1.00 No. 730.60 Each 731.00
threaded
1.00 No. 1016.30 Each 1016.00
threaded
1.00 No. 1365.90 Each 1366.00
direction of Engineer-in-charge : Female
Threaded Elbow 90 degrees.
threaded
1.00 No. 238.10 Each 238.00
threaded
1.00 No. 319.40 Each 319.00
threaded
1.00 No. 329.85 Each 330.00
threaded
1.00 No. 489.00 Each 489.00
threaded
1.00 No. 851.40 Each 851.00
threaded
1.00 No. 1068.60 Each 1069.00
threaded
1.00 No. 1155.70 Each 1156.00
threaded
1.00 No. 1281.15 Each 1281.00
threaded
1.00 No. 1493.70 Each 1494.00
direction of Engineer-in-charge : Male Threaded
Elbow 90 degrees
threaded
1.00 No. 250.90 Each 251.00
threaded
1.00 No. 317.10 Each 317.00
threaded
1.00 No. 334.50 Each 335.00
threaded
1.00 No. 437.90 Each 438.00
threaded
1.00 No. 702.70 Each 703.00
threaded
1.00 No. 854.85 Each 855.00
threaded
1.00 No. 1084.85 Each 1085.00
threaded
1.00 No. 1231.20 Each 1231.00
threaded
1.00 No. 1382.20 Each 1382.00
threaded
1.00 No. 1683.00 Each 1683.00
direction of Engineer-in-charge. : Cap
direction of Engineer-in-charge. : Pipe Bridge
1165023.00
992 Providing, laying and jointing glazed stoneware
pipes class SP-1 with stiff mixture of cement
mortar in the proportion of 1:1 (1 cement : 1
fine sand) including testing of joints etc.
complete :
Metre
198.00
Metre
302.00
c) 200 mm diameter 1.00 m 447.25 One Running
Metre
447.00
d) 250 mm diameter 1.00 m 676.75 One Running
Metre
677.00
e) 300 mm diameter 1.00 m 747.90 One Running
Metre
748.00
993 Providing and laying cement concrete 1:5:10 (1
aggregate 40 mm nominal size) all-round S.W.
pipes including bed concrete as per standard
design:
Sub-Head : Drainage
Total of the Sub-Head - Water Supply :
a) 100 mm diameter S.W. pipe 1.00 m 543.55 One Running
Metre
544.00
b) 150 mm diameter S.W. pipe 1.00 m 664.80 One Running
Metre
665.00
c) 200 mm diameter S.W. pipe 1.00 m 774.95 One Running
Metre
775.00
d) 250 mm diameter S.W. pipe 1.00 m 896.15 One Running
Metre
896.00
994 Providing and laying cement concrete 1:5:10 (1
aggregate 40 mm nominal size) up to haunches
of S.W. pipes including bed concrete as per
standard design :
a) 100 mm diameter S.W. pipe 1.00 m 258.35 One Running
Metre
258.00
b) 150 mm diameter S.W. pipe 1.00 m 418.70 One Running
Metre
419.00
c) 200 mm diameter S.W. pipe 1.00 m 492.15 One Running
Metre
492.00
d) 250 mm diameter S.W. pipe 1.00 m 572.95 One Running
Metre
573.00
e) 300 mm diameter S.W. pipe 1.00 m 661.10 One Running
Metre
661.00
995 Providing and fixing square-mouth S.W. gully
trap class SP-1 complete with C.I. grating brick
masonry chamber with water tight C.I. cover
with frame of 300 x300 mm size (inside) the
weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per
standard design :
a) 100x100 mm size P type
(i) With common burnt clay F.P.S. (non modular)
1.00 No. 1520.90 Each 1521.00
(ii) With Sewer bricks conforming to IS : 4885 1.00 No. 1522.10 Each 1522.00
b) 150 x 100 mm size P type.
1.00 No. 1546.95 Each 1547.00
(ii) With sewer bricks conforming to IS : 4885 1.00 No. 1548.15 Each 1548.00
c) 180x150 mm size P type
1.00 No. 1635.00 Each 1635.00
996 Dismantling of old S.W. pipes including breaking
of joints and bed concrete stacking of useful
materials near the site within 50 m lead and
disposal of unserviceable materials into
municipal dumps:
Metre
29.00
Metre
32.00
c) 200 mm diameter 1.00 m 34.50 One Running
Metre
35.00
d) 250 mm diameter 1.00 m 36.55 One Running
Metre
37.00
e) 300 mm diameter 1.00 m 38.65 One Running
Metre
39.00
f) 350 mm diameter 1.00 m 44.50 One Running
Metre
45.00
g) 400 mm diameter 1.00 m 48.65 One Running
Metre
49.00
h) 450 mm diameter 1.00 m 50.70 One Running
Metre
51.00
997 Providing and laying non-pressure NP2 class
(light duty) R.C.C. pipes with collars jointed with
stiff mixture of cement mortar in the proportion
of 1:2 (1 cement : 2 fine sand) including testing
of joints etc. complete :
a) 100 mm dia. R.C.C. pipe 1.00 m 311.90 One Running
Metre
312.00
b) 150 mm dia. R.C.C. pipe 1.00 m 340.35 One Running
Metre
340.00
c) 250 mm dia. R.C.C. pipe 1.00 m 455.90 One Running
Metre
456.00
d) 300 mm dia. R.C.C. pipe 1.00 m 494.35 One Running
Metre
494.00
e) 450 mm dia. R.C.C. pipe 1.00 m 688.90 One Running
Metre
689.00
f) 500 mm dia. R.C.C. pipe 1.00 m 915.85 One Running
Metre
916.00
g) 600 mm dia. R.C.C. pipe 1.00 m 1358.65 One Running
Metre
1359.00
h) 700 mm dia. R.C.C. pipe 1.00 m 1539.00 One Running
Metre
1539.00
i) 800 mm dia. R.C.C. pipe 1.00 m 1722.50 One Running
Metre
1723.00
j) 900 mm dia. R.C.C. pipe 1.00 m 1931.75 One Running
Metre
1932.00
k) 1000 mm dia. R.C.C. pipe 1.00 m 2395.25 One Running
Metre
2395.00
l) 1100 mm dia. R.C.C. pipe 1.00 m 2821.35 One Running
Metre
2821.00
m) 1200 mm dia. R.C.C. pipe 1.00 m 3002.85 One Running
Metre
3003.00
998 Constructing brick masonry manhole in cement
mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:2:4 mix (1 cement :
2coarse sand : 4 graded stone aggregate 20 mm
nominal size),foundation concrete 1:4:8 mix (1
aggregate 40mmnominal size), inside plastering
12mm thick with cement mortar 1:3 (1 cement :
3 coarse sand) finished with floating coat of
neat cement and making channels in cement
concrete 1:2:4 (1cement : 2 coarse sand : 4
complete as per standard design :
a) Inside size 90x80 cm and 45 cm deep including
C.I. cover with frame (light duty) 455x610 mm
internal dimensions, total weight of cover and
frame to be not less than 38 kg(weight of cover
23 kg and weight of frame 15 kg) :
1.00 No. 8062.70 Each 8063.00
b) Inside size 120x90 cm and 90 cm deep including
C.I. cover with frame (medium duty) 500 mm
internal diameter, total weight of cover and
frame to be not less than 116 kg(weight of
cover 58 kg and weight of frame 58 kg) :
1.00 No. 17592.00 Each 17592.00
c) Inside size 120x90 cm and 90 cm deep including
C.I. cover with frame (heavy duty) 560 mm
internal diameter, total weight of cover and
frame to be not less than 208 kg(weight of
cover 108 kg and weight of frame 100 kg) :
1.00 No. 22155.05 Each 22155.00
999 Extra for depth for manholes
a) Size 90x80 cm
Metre
5481.00
(ii) With Sewer bricks conforming to IS : 4885 1.00 m 5490.50 One Running
Metre
5491.00
b) Size 120x90 cm
Metre
6563.00
(ii) With Sewer bricks conforming to IS : 4885 1.00 m 6573.85 One Running
Metre
6574.00
1000 Constructing brick masonry circular type
manhole 0.91m internal dia at bottom and
0.56m dia at top in cement mortar 1:4 (1
cement :4 coarse sand), in side cement plaster
12 mm thick with cement mortar 1:3 (1cement :
3 coarse sand) finished with a floating coat of
neat cement, foundation concrete 1:3:6 mix (1
aggregate 40mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1
aggregate 20mm nominal size) finished with a
floating coat of neat cement, all complete as
per standard design :
a) 0.91 m deep with S.F.R.C. cover and frame
(heavy duty, HD-20 grade designation) 560mm
internal diameter conforming to I.S. 12592,
total weight of cover and frame to be not less
than 182kg., fixed in cement concrete 1:2:4
(1cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) including
centering, shuttering all complete.(Excavation,
foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately)
:
1.00 No. 8241.55 Each 8242.00
1001 Extra depth for circular type manhole 0.91m
internal dia (at bottom) beyond 0.91m to 1.67m
Metre
4698.00
b) With Sewer bricks conforming IS : 4885 1.00 m 4706.00 One Running
Metre
4706.00
1002 Constructing brick masonry circular manhole
1.22m internal dia at bottom and 0.56m dia at
top in cement mortar 1:4 (1 cement :4 coarse
sand) inside cement plaster 12mm thick with
cement mortar 1:3 (1cement :3 coarse sand)
foundation concrete 1:3:6 (1 cement : 3 coarse
size) and making necessary channel in cement
finished with a floating coat of neat cement, all
a) 1.68 m deep with SFRC Cover and frame (heavy
duty HD- 20 grade designation) 560mm internal
diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182kg.
fixed in cement concrete 1:2:4 (1 cement :
2coarse sand : 4 graded stone aggregate 20mm
nominal size) including centering, shuttering all
complete.(Excavation, foot rests and 12 mm
thick cement plaster at the external surface
shall be paid for separately) :
1.00 No. 15524.40 Each 15524.00
(ii) With Sewer bricks conforming IS : 4885 1.00 No. 15525.85 Each 15526.00
1003 Extra depth for circular type manhole 1.22m
internal dia (at bottom) beyond 1.68 m to 2.29
m :
Metre
6087.00
Metre
6097.00
1004 Constructing brick masonry circular manhole
1.52 m internal dia at bottom and 0.56 m dia at
top in cement mortar 1:4 (1 cement : 4 coarse
sand) inside cement plaster 12mm thick with
finished with a floating coat of neat cement,
foundation concrete 1:3:6 (1 cement : 3 coarse
size) and making necessary channel in cement
finished with a floating coat of neat cement, all
a) 2.30m deep with SFRC Cover and frame (heavy
duty HD- 20 grade designation) 560mm internal
diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182 kg.
fixed in cement concrete 1:2:4 (1 cement :
2coarse sand : 4 graded stone aggregate 20mm
nominal size) including centering, shuttering all
complete.(Excavation, foot rests and 12 mm
thick cement plaster at the external surface
shall be paid for separately) :
1.00 No. 33216.90 Each 33217.00
(ii) With Sewer bricks conforming IS : 4885 1.00 No. 33229.95 Each 33230.00
1005 Extra depth for circular type manhole 1.52 m
internal dia (at bottom) beyond 2.30 m :
Metre
14523.00
Metre
14549.00
1006 Providing M.S. foot rests including fixing in
manholes with 20x20x10 cm cement concrete
blocks 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) as
per standard design :
a) With 20x20 mm square bar 1.00 No. 261.45 Each 261.00
b) With 20 mm diameter round bar 1.00 No. 225.90 Each 226.00
1007 Providing orange colour safety foot rest of
minimum 6 mm thick plastic encapsulated as
per IS : 10910 on 12mm dia steel bar
conforming to IS: 1786 having minimum cross
section as 23 mmx25mm and over all minimum
length 263 mm and width as 165mm with
minimum 112 mm space between protruded
legs having 2 mm tread on top surface by
ribbing or chequering besides necessary and
adequate anchoring projections on tail length
on 138 mm as per standard drawing and
suitable to with stand the bend test and
chemical resistance test as per specifications
and having manufacture's permanent
identification mark to be visible even after
fixing, including fixing in manholes
with30x20x15 cm cement concrete block 1:3:6
(1 cement : 3 coarse sand :6 graded stone
aggregate 20 mm nominal size) complete as per
design.
1.00 No. 295.20 Each 295.00
1008 Replacement of M.S. foot rests in manholes
including dismantling concrete blocks and fixing
with 20x20x10 cm cement concrete blocks1:3:6
(1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) :
a) With 20x20 mm square bar 1.00 No. 305.00 Each 305.00
b) With 20 mm diameter round bar 1.00 No. 269.45 Each 269.00
1009 Supplying and fixing C.I. cover without frame for
manholes :
a) 455x610 mm rectangular C.I. cover (light duty)
the weight of the cover to be not less than 23
kg.
1.00 No. 1217.00 Each 1217.00
b) 500 mm diameter C.I. cover (medium duty) the
weight of the cover to be not less than 58 kg.
1.00 No. 2739.45 Each 2739.00
c) 560 mm diameter C.I. cover (heavy duty) the
weight of the cover to be not less than 108 kg.
1.00 No. 5880.70 Each 5881.00
1010 Providing and fixing in position pre-cast R.C.C.
manhole cover and frame of required shape
and approved quality
a) L D- 2.5
(i) Rectangular shape 600x450mm internal
dimensions
1.00 No. 1108.05 Each 1108.00
(ii) Square shape 450mm internal dimensions 1.00 No. 942.65 Each 943.00
(iii) Circular shape 450mm internal diameter 1.00 No. 884.60 Each 885.00
b) M D - 10
(i) Square shape 450mm internal dimension 1.00 No. 1056.15 Each 1056.00
(ii) Circular shape 500mm internal diameter 1.00 No. 960.45 Each 960.00
c) H D - 20
(i) Circular shape 560 mm internal diameter 1.00 No. 1492.05 Each 1492.00
d) EHD - 35
(i) Circular shape 560 mm internal dia. 1.00 No. 1637.20 Each 1637.00
1011 Supplying and fixing C.I. cover 300x300 mm
without frame for gully trap (standard pattern)
the weight of cover to be not less than 4.5kg.
1.00 No. 277.00 Each 277.00
1012 Making connection of drain or sewer line with
existing manhole including breaking into and
making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement
mortar 1:3 (1 cement : 3 coarse sand) finished
with a floating coat of neat cement and making
necessary channels for the drain etc. complete :
a) For pipes 100 to 250 mm diameter 1.00 No. 330.50 Each 331.00
b) For pipes 250 to 300 mm diameter 1.00 No. 394.75 Each 395.00
c) For pipes 350 to 450 mm diameter 1.00 No. 574.10 Each 574.00
1013 Providing sand cast iron drop connection
externally for 60 cm drop from branch sewer
line to main sewer manhole including
inspection and cleaning eye with chain and lid,
sand cast iron drop pipe and bend encased all-
round with cement concrete 1:5:10 (1 cement :
5 fine sand :10 graded stone aggregate 40 mm
nominal size) with all centering and shuttering
required, cutting holes in walls and making
good with brickwork in cement mortar 1:4 (1
cement : 4 coarse sand) plastered with cement
mortar 1:3 (1 cement : 3 coarse sand) on inside
of the manhole wall, lead caulked joints
between sand cast iron pipes and fittings, stiff
cement mortar 1:1 (1 cement : 1 fine sand)
joints between sand cast-iron tee and S.W.
pipe, making required channels complete as per
standard design and specifications :
a) 100 mm dia. sand cast iron drop connection 1.00 No. 5884.25 Each 5884.00
b) 150 mm dia. sand cast iron drop connection 1.00 No. 8130.35 Each 8130.00
1014 Extra for depths beyond 60 cm of sand cast iron
drop connection complete :
a) For 100 mm dia. sand cast iron drop connection 1.00 m 1811.45 One Running
Metre
1811.00
b) For 150 mm dia. sand cast iron drop connection 1.00 m 2399.15 One Running
Metre
2399.00
1015 Dismantling of manhole including R.C.C. top
slab, C.I. cover with frame including stacking of
useful materials near the site and disposal of
unserviceable materials into municipal dumps
within 50 m lead :
a) Rectangular manhole 90x80 cm and 45 cm deep 1.00 No. 847.25 Each 847.00
b) Rectangular manhole 120x90 cm and 90 cm
deep
1.00 No. 1487.15 Each 1487.00
c) Rectangular arch type manhole 140x90cm and
2.45m deep
1.00 No. 2813.45 Each 2813.00
d) Circular manhole 122 cm diameter and 1.68 m
deep
1.00 No. 2155.85 Each 2156.00
1016 Extra for depth of manholes dismantled:
a) Rectangular manhole 90x80 cm and beyond 45
cm depth
Metre
678.00
b) Rectangular manhole 120x90 cmand beyond 90
cm depth
Metre
807.00
c) Rectangular arch type manhole 140x90 cm and
beyond 2.45m depth (up to 4.25 m depth).
Metre
653.00
d) Circular manhole 122 cm diameter and beyond
1.68 m depth (up to 2.29 m depth)
Metre
737.00
1017 Raising manhole cover and frame slab to
required level including dismantling existing
slab and making good the damage as
required(Raising depth of manhole to be paid
separately) :
a) Rectangular manhole 90x80 cm with
rectangular cover 600x450 mm of grade LD - 2.5
1.00 No. 1446.35 Each 1446.00
b) Rectangular manhole 120x90 cm with circular
cover 500 mm dia of grade MD - 10
1.00 No. 2267.90 Each 2268.00
c) Rectangular manhole 120x90 cm with circular
cover 560 mm dia of grade HD - 20
1.00 No. 2110.85 Each 2111.00
d) Circular manhole 140 cm dia with circular cover
600 mm dia of grade EHD - 35
1.00 No. 195.95 Each 196.00
1018 Constructing brick masonry road gully chamber
50x45x60 cm with bricks in cement mortar 1:4
(1 cement : 4 coarse sand) including500x450
mm pre-cast R.C.C. horizontal grating with
frame complete as per standard design :
1.00 No. 3774.95 Each 3775.00
45x45x77.5 cm with bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) with pre-cast
R.C.C. vertical grating complete as per standard
design :
1.00 No. 4228.00 Each 4228.00
110x50x77.5 cm with bricks in cement mortar
1:4 (1 cement : 4 coarse sand)
including500x450 mm pre-cast R.C.C. horizontal
grating with frame and vertical grating
1.00 No. 7166.70 Each 7167.00
1021 Constructing brick masonry chamber for
underground C.I. inspection chamber and bends
with bricks in cement mortar 1:4 (1 cement :
4coarse sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight
of cover with frame to be not less than 38
kg(weight of cover 23 kg and weight of frame
15 kg), R.C.C. top slab with1:2:4 mix (1 cement
:2 coarse sand : 4 graded stone aggregate 20
mmnominal size) foundation concrete 1:5:10 (1
cement : 5 fine sand : 10graded stone aggregate
40 mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished smooth with a floating
coat of neat cement on walls and bed concrete
etc. complete as per standard design :
a) Inside dimensions 455x610 mm and 45 cmdeep
for single pipe line :
1.00 No. 4505.00 Each 4505.00
b) Inside dimensions 500x700 mm and 45 cmdeep
for pipe line with one or two inlets :
1.00 No. 5159.50 Each 5160.00
c) Inside dimensions 600x 850 mm and 45 cm
deep for pipe line with three or more inlets :
1.00 No. 5967.85 Each 5968.00
1022 Extra for depth beyond 45 cm of brick masonry
chamber :
a) For 455x610 mm size
Metre
3821.00
b) For 500x700 mm size
Metre
4166.00
c) For 600x850 mm size
Metre
4848.00
1023 Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft
with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard
design.
1.00 No. 16705.45 Each 16705.00
1024 Constructing soak pit 1.20x1.20x1.20m filled
with brickbats including S.W. drain pipe 100
mm diameter and 1.20 m long complete as per
standard design.
1.00 No. 2049.45 Each 2049.00
1025 Providing and fixing S.W. intercepting trap in
manholes with stiff mixture of cement mortar
1:1 (1 cement : 1 fine sand) including testing of
joints etc. complete :
a) 100 mm dia 1.00 No. 282.75 Each 283.00
b) 150 mm dia 1.00 No. 383.25 Each 383.00
1026 Providing and laying Non Pressure NP-3 class
(Medium duty) R.C.C.pipes including
collars/spigot jointed with stiff mixture of
cement mortar in the proportion of 1:2 (1
cement : 2 fine sand) including testing of joints
etc. complete
a) 450 mm dia RCC pipes. 1.00 m 1905.15 One Metre 1905.00
b) 600 mm dia RCC pipes. 1.00 m 2490.15 One Metre 2490.00
c) 900 mm dia RCC pipes. 1.00 m 3922.10 One Metre 3922.00
d) 1000 mm dia RCC pipes. (Laying by manual/
mechanical means)
1.00 m 4851.25 One Metre 4851.00
e) 1200 mm dia RCC pipes. (Laying by manual/
mechanical means)
1.00 m 6363.55 One Metre 6364.00
f) 1800 mm dia RCC pipes. (Laying by
manual/mechanical means)
1.00 m 11683.90 One Metre 11684.00
1027 Providing and laying Non Pressure NP-4 class
(Heavy duty) R.C.C.pipes including collars/spigot
jointed with stiff mixture of cement mortar in
the proportion of 1:2 (1 cement : 2 fine sand)
including testing of joints etc. complete
a) 450 mm dia RCC pipes. 1.00 m 2180.45 One Metre 2180.00
b) 600 mm dia RCC pipes. 1.00 m 2856.00 One Metre 2856.00
c) 900 mm dia RCC pipes. 1.00 m 5600.45 One Metre 5600.00
d) 1000 mm dia RCC pipes. (Laying by
1.00 m 6802.55 One Metre 6803.00
e) 1200 mm dia RCC pipes. (Laying by
1.00 m 8070.95 One Metre 8071.00
f) 1800 mm dia RCC pipes. (Laying by
1.00 m 16513.95 One Metre 16514.00
511315.00
1028 Providing, driving and installing driven cast-in-
situ reinforced cement concrete piles of grade
M-25 of specified diameter and length below
the pile cap, to carry safe working load not less
than specified, excluding the cost of steel
reinforcement but including the cost of shoe
and the length of pile to be embedded in the
pile cap etc. all complete. (Length of pile for
payment shall be measured from top of shoe to
the bottom of pile cap) :
a) 400 mm dia piles 1.00 m 1845.95 One Running
Metre
1846.00
b) 450 mm dia piles 1.00 m 2261.30 One Running
Metre
2261.00
c) 500 mm dia piles 1.00 m 2724.20 One Running
Metre
2724.00
d) 550 mm dia piles 1.00 m 2944.00 One Running
Metre
2944.00
e) 750 mm dia piles. 1.00 m 4962.65 One Running
Metre
4963.00
f) 1000 mm dia piles. 1.00 m 8148.85 One Running
Metre
8149.00
g) 1200 mm dia piles. 1.00 m 10464.95 One Running
Metre
10465.00
h) 1500 mm dia piles. 1.00 m 14650.50 One Running
Metre
14651.00
Total of the Sub-Head - Drainage :
Sub-Head : Pile Work
1029 Boring, providing and installing bored cast-in-
situ reinforced cement concrete piles of grade
M-25 of specified diameter and length below
the pile cap, to carry a safe working load not
less than specified, excluding the cost of steel
reinforcement but including the cost of boring,
with bentonite solution and temporary casing
of appropriate length for setting out and
removal of same and the length of the pile to
be embedded in the pile cap etc. all complete,
including removal of excavated earth with all
lifts and leads (Length of pile for payment shall
be measured upto bottom of pile cap).
a) 300 mm dia piles 1.00 m 1424.75 One Running
Metre
1425.00
Metre
1729.00
Metre
2239.00
d) 500 mm dia. piles 1.00 m 2626.25 One Running
Metre
2626.00
e) 600 mm dia piles 1.00 m 3454.75 One Running
Metre
3455.00
Metre
4944.00
g) 1000 mm dia piles. 1.00 m 8201.40 One Running
Metre
8201.00
h) 1200 mm dia piles. 1.00 m 10641.25 One Running
Metre
10641.00
i) 1500 mm dia piles. 1.00 m 15168.35 One Running
Metre
15168.00
1030 Boring, Providing and installing cast in situ
single under reamed piles of specified diameter
and length below pile cap in M-25 cement
concrete, to carry a safe working load not less
than specified, excluding the cost of steel
reinforcement but including the cost of boring
with bentonite solution and the length of the
pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be
measured upto to the bottom of pile cap) :
a) 300 mm dia piles. 1.00 m 2065.50 One Running
Metre
2066.00
Metre
2471.00
Metre
2714.00
d) 550 mm dia piles 1.00 m 3001.60 One Running
Metre
3002.00
1031 Extra over item No 20.3 for providing additional
bulb in under reamed piles, under specified dia
meter (Only the quantity of extra bulbs are to
be paid).
a) 300mm dia piles. 1.00 No. 1417.30 Each 1417.00
b) 400mm dia piles. 1.00 No. 1599.25 Each 1599.00
c) 450 mm dia piles. 1.00 No. 1709.10 Each 1709.00
d) 550 mm dia piles. 1.00 No. 1884.90 Each 1885.00
1032 Providing, driving and installing driven Pre-cast
reinforced cement concrete piles of specified
diameter and length below the pile cap in M-25
cement concrete to carry safe working load not
less than specified. With a central through
preformed hole with M.S. black pipe of dia, 40
mm for grouting with cement sand grouting of
mix 1:2 (1cement : 2 coarse sand) under
sufficient positive pressure to ensure complete
filling including centring, shuttering, driving and
removing the steel casing pipe and lifting casing
etc. complete but excluding the cost of steel
reinforcement. (Length of pile for payment shall
be measured from top of the shoe to the
bottom of pile cap).
a) 400 mm dia piles. 1.00 m 2328.45 One Running
Metre
2328.00
b) 450 mm dia piles. 1.00 m 2776.65 One Running
Metre
2777.00
c) 500 mm dia piles. 1.00 m 2945.35 One Running
Metre
2945.00
d) 550 mm dia piles. 1.00 m 3305.05 One Running
Metre
3305.00
e) 750 mm dia piles. 1.00 m 5977.70 One Running
Metre
5978.00
Metre
8079.00
1033 Vertical load testing of piles in accordance with
IS 2911 (Part IV) including installation of loading
platform and preparation of pile head or
construction of test cap and dismantling of test
cap after test etc. complete as per specification
& the direction of Engineer in-charge.
a) Single pile upto 50 tonne capacity
(i) Initial test. 1.00 Nos 38561.80 Per Test 38562.00
(ii) Routine test 1.00 Nos 17422.50 Per Test 17423.00
b) Single pile above 50 tonne and upto 100 tonne
capacity
(i) Initial test 1.00 Nos 46808.45 Per Test 46808.00
(ii) Routine test. 1.00 Nos 26714.50 Per Test 26715.00
c) Group of two or more piles upto 50 tonne
capacity
(i) Initial test 1.00 Nos 56332.80 Per Test 56333.00
(ii) Routine test 1.00 Nos 34264.20 Per Test 34264.00
1034 Cyclic vertical load testing of pile in accordance
with IS Code of practice IS: 2911 (part IV)
including preparation of pile head etc for.
a) Single pile.
(i) Upto 50 tonne capacity pile. 1.00 Nos 17422.50 Per Test 17423.00
(ii) Above 50 tonne and upto 100 tonne capacity
pile.
1.00 Nos 26714.50 Per Test 26715.00
b) Group of two piles.
(i) Upto 50 tonne capacity each. 1.00 Nos 34264.20 Per Test 34264.00
1035 Lateral load testing of single pile in accordance
with IS Code of practice IS : 2911 (Part IV) for
determining safe allowable lateral load on pile :
a) Upto 50 tonne capacity pile. 1.00 Nos 17422.50 Per Test 17423.00
b) Above 50 tonne and upto 100 tonne capacity
pile.
1.00 Nos 27411.40 Per Test 27411.00
1036 Integrity testing of Pile using Low Strain/ Sonic
Integrity Test/ Sonic Echo Test method in
accordance with IS 14893 including surface
preparation of pile top by removing soil, mud,
dust & chipping lean concrete lumps etc. and
use of computerised equipment and high skill
trained personal for conducting the test &
submission of results, all complete as per
1.00 Nos 729.65 Per Test 730.00
484777.00
1037 Providing and fixing aluminium work for doors,
windows, ventilators and partitions with
extruded built up standard tubular
sections/appropriate Z sections and other
sections of approved make conforming to IS:
733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling
up the gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/neoprene
gasket etc. Aluminium sections shall be smooth,
rust free, straight, mitred and jointed
mechanically wherever required including cleat
angle, Aluminium snap beading for glazing /
paneling, C.P. brass/ stainless steel screws, all
complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for
separately) :
a) For fixed portion
(i) Anodised aluminium (anodised transparent or
dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
1.00 Kg 343.70 One Kilogram 344.00
(ii) Powder coated aluminium (minimum thickness
of powder coating 50 micron)
1.00 Kg 373.00 One Kilogram 373.00
(iii) Polyester powder coated aluminium (minimum
thickness of polyester powder coating 50
micron)
1.00 Kg 380.30 One Kilogram 380.00
b) For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots
and making provision for fixing of fittings
wherever required including the cost of EPDM
rubber / neoprene gasket required (Fittings
(i) Anodised aluminium (anodised transparent or
dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
1.00 Kg 397.75 One Kilogram 398.00
Total of the Sub-Head - Pile Work :
Sub-Head : Aluminium Work
(ii) Powder coated aluminium (minimum thickness
of powder coating 50 micron)
1.00 Kg 427.60 One Kilogram 428.00
(iii) Polyester powder coated aluminium (minimum
thickness of polyester powder coating 50
micron)
1.00 Kg 435.05 One Kilogram 435.00
1038 Providing and fixing 12mm thick prelaminated
particle board flat pressed three layer or graded
wood particle board conforming to IS:12823
Grade l Type ll, in panelling fixed in aluminum
doors, windows shutters and partition frames
with C.P. brass / stainless steel screws etc.
complete as per architectural drawings and
directions of engineer-in-charge.
a) Pre-laminated particle board with decorative
lamination on one side and balancing
lamination on other side.
Metre
1017.00
b) Pre-laminated particle board with decorative
lamination on both sides.
Metre
1066.00
1039 Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc.
with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and
the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic
item):
a) With float glass panes of 4.0 mm thickness 1.00 Sqm 790.00 One Square
Metre
790.00
b) With float glass panes of 5.50 mm thickness 1.00 Sqm 1009.00 One Square
Metre
1009.00
c) With float glass panes of 8 mm thickness 1.00 Sqm 1267.50 One Square
Metre
1268.00
1040 Providing and fixing double action hydraulic
floor spring of approved brand and
manufacture conforming to IS : 6315, having
brand logo embossed on the body / plate with
double spring mechanism and door weight upto
125 kg., for doors, including cost of cutting
floors ,embedding in floors as required and
making good the same matching to the existing
floor finishing and cover plates with brass pivot
and single piece M.S. sheet outer box with slide
plate etc. complete as per the direction of
Engineer-in-charge.
a) With stainless steel cover plate minimum 1.25
mm thickness.
1.00 No. 2020.05 Each 2020.00
b) With brass cover plate minimum 1.25 mm
thickness.
1.00 No. 2194.30 Each 2194.00
1041 Providing and fixing powder coated aluminium
work (minimum thickness of powder coating 50
micron) consisting of tee/ angle sections, of
approved make conforming to IS : 733 in frames
of false ceiling including aluminium angle cleats
with necessary C.P. brass/stainless steel sunk
screws, aluminium perimeter angles fixed to
wall with stainless steel rawl plugs @ 450 mm
centre to centre and fixing the frame work to
G.I. level adjusting hangers 6 mm dia. with
necessary cadmium plated machine screws all
complete as per approved architectural
drawings and direction of the Engineer-in-
charge (level adjusting hangers, ceiling cleats
and expansion hold fasteners to be paid for
separately).
1.00 Kg 459.15 One Kilogram 459.00
1042 Providing and fixing 6 mm dia. G.I. level
adjusting hangers (upto 1200mm length), fixed
to roof slabs by means of ceiling cleats made
out of G.I. flat 40x3mm size 60 mm long and
stainless steel expandable dash fastener of 12.5
mm dia and 50 mm long, complete as per
direction of Engineer -in-charge.
1.00 No. 105.70 Each 106.00
1043 Providing and fixing machine moulded
aluminium covering of approved pattern &
design, made out of machine cut aluminium
sheet and machine holed for receiving dash
fastener, over expansion joints on vertical
surfaces/ceiling floors, the fixing on plate in one
row on one side of joint only shall be done with
stainless steel dash fasteners of 8mm dia and
75 mm long bolt including providing aluminium
washers 2 mm thick & 15 mm dia , at a
staggered pitch of 200mm centre to centre
including drilling holes in the receiving surface
and providing expandable plastic sleeves in
holes etc. complete as per drawing and
direction of Engineer-in-charge..
a) Anodised aluminium sheet 2.5mm thick
(anodised transparent or dyed to required
shade according to IS:1868, Minimum anodic
coating of grade AC 15)
1.00 Kg 469.20 One Kilogram 469.00
b) Powder coated aluminium sheet 2.5mm thick
(minimum thickness of powder coating 50
micron)
1.00 Kg 498.50 One Kilogram 499.00
1044 Filling the gap in between aluminium frame &
adjacent RCC/ Brick/ Stone work by providing
weather silicon sealant over backer rod of
approved quality as per architectural drawings
and direction of Engineer-in-charge complete.
a) Upto 5mm depth and 5 mm width 1.00 m 83.05 One Running
Metre
83.00
1045 Extra for applying additional anodic coating AC
25 instead of AC 15 to aluminium extruded
sections.
a) For fixed portion 1.00 Kg 11.60 One Kilogram 12.00
b) For shutters of doors, windows & ventilators. 1.00 Kg 11.60 One Kilogram 12.00
1046 Providing and fixing double glazed hermetically
sealed glazing in aluminium windows,
ventilators and partition etc. with 6 mm thick
clear float glass both side, having 12 mm air
gap, including providing EPDM gasket,
perforated aluminium spacers, desiccants,
sealant (Both primary and secondary sealant)
etc. as per specifications, drawings and
direction of Engineer-in-charge complete.
Metre
3382.00
1047 Providing and fixing stainless steel (SS 304
grade) adjustable friction windows stays of
approved quality with necessary stainless steel
screws etc. to the side hung windows as per
direction of Engineer-in-charge complete.
a) 205 X 19 mm 1.00 No. 212.35 Each 212.00
b) 255 X 19 mm 1.00 No. 262.30 Each 262.00
c) 355 X 19 mm 1.00 No. 332.00 Each 332.00
d) 510 X 19 mm 1.00 No. 581.70 Each 582.00
e) 710 X 19 mm 1.00 No. 999.85 Each 1000.00
1048 Providing and fixing aluminium tubular handle
bar 32 mm outer dia, 3.0 mm thick & 2100 mm
long with SS screws etc .complete as per
direction of Engineer-in-Charge.
a) Anodized (AC 15 ) aluminium tubular handle bar 1.00 No. 462.35 Each 462.00
b) Powder coated minimum thickness 50 micron
aluminium tubular handle bar.
1.00 No. 507.90 Each 508.00
c) Polyester powder coated minimum thickness 50
micron aluminium tubular handle bar
1.00 No. 519.30 Each 519.00
1049 Providing and fixing 100mm brass locks (best
make of approved quality) for aluminium doors
including necessary cutting and making good
etc. complete.
1.00 No. 386.80 Each 387.00
1050 Providing and fixing anodised aluminium
shade according to IS: 1868. Minimum anodic
coating of grade AC 15) sub frame work for
windows and ventilators with extruded built up
standard tubular sections of approved make
conforming to IS: 733 and IS: 1285, fixed with
dash fastener of required dia and size (Dash
fastener to be paid for separately).
1.00 Kg 310.85 One Kilogram 311.00
1051 Providing and fixing aluminium casement
windows fastener of required length for
aluminium windows with necessary screws etc.
complete.
a) Anodized (AC 15) aluminium 1.00 No. 51.20 Each 51.00
aluminium.
1.00 No. 52.40 Each 52.00
micron aluminium.
1.00 No. 51.20 Each 51.00
1052 Providing and fixing aluminium round shape
handle of outer dia 100mm with SS screws etc.
complete as per direction of Engineer-in-charge
a) Anodized (AC 15 ) aluminium 1.00 No. 61.70 Each 62.00
aluminium
1.00 No. 67.50 Each 68.00
micron aluminium.
1.00 No. 73.30 Each 73.00
1053 Providing and fixing anodised aluminium grill
shade according to IS: 1868 with minimum
anodic coating of grade AC 15) of approved
design/pattern, with approved standard section
and fixed to the existing window frame with C.P
brass/ stainless steel screws @ 200mm centre
to centre, including cutting the grill to proper
opening size for fixing and operation of handles
and fixing approved anodised aluminium
standard section around the opening, all
complete as per requirement and direction of
Engineer-in-charge. (Only weight of grill to be
measured for payment).
1.00 Kg 398.45 One Kilogram 398.00
1054 Providing and fixing 12 mm thick frameless
toughened glass door shutter of approved
brand and manufacture, including providing and
fixing top & bottom pivot & spring type fixing
arrangement and making necessary holes etc.
for fixing required door fittings, all complete as
per direction of Engineer-in-charge (Door
handle, lock and stopper etc. to be paid
separately).
Metre
4693.00
26767.00
1055 Providing and laying integral cement based
treatment for water proofing on horizontal
surface at all depth below ground level for
under ground structures as directed by Engineer-
in-Charge and consisting of : i) Istlayer of 22mm
to 25mm thick approved and specified rough
stone slab over a 25mm thick base of cement
mortar 1:3 (1 cement : 3 coarse sand) mixed
with water proofing compound conforming to
IS:2645 in the recommended proportion over
the leveling course (leveling course to be paid
separately). Joints sealed and grouted with
cement slurry mixed with water proofing
compound. ii) 2nd layer of 25mm thick cement
mortar 1:3 (1 cement: 3 coarse sand) mixed
with water proofing compound in
recommended proportions. iii) Finishing top
with stone aggregate of 10mm to 12mm
nominal size spreading @ 8 cudm/sqm
thoroughly embedded in the 2nd layer.
a) Using rough kota stone. 1.00 Sqm 844.10 One Square
Metre
844.00
Total of the Sub-Head - Aluminium Work :
Sub-Head : Water Proofing
treatment for water proofing on the vertical
surface by fixing specified stone slab 22 mm to
25mmthick with cement slurry mixed with
water proofing compound conforming to
IS:2645 in recommended proportions with a
gap of 20mm(minimum) between stone slabs
and the receiving surfaces and filling the gaps
with neat cement slurry mixed with water
proofing compound and finishing the exterior of
stone slab with cement mortar 1:3 (1cement : 3
coarse sand) 20mm thick with neat cement
punning mixed with water proofing compound
in recommended proportion complete at all
levels and as directed by Engineer-in-charge :
a) Using rough Kota stone 1.00 Sqm 1036.90 One Square
Metre
1037.00
1057 Providing and laying water proofing treatment
to vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting
of :i) Ist course of applying cement slurry @ 4.4
Kg/sqm mixed with water proofing compound
conforming to IS 2645 in recommended
proportions including rounding off junction of
vertical and horizontalsurface. ii) IInd course of
20mm cement plaster 1:3 (1 cement : 3 coarse
sand)mixed with water proofing compound in
recommended proportion including rounding
off junction of vertical and horizontal surface.iii)
IIIrd course of applying blown or residual
bitumen applied hot at 1.7Kg. per sqm of area.
iv) IVth course of 400 micron thick PVC sheet.
(Overlaps at joints of PVC sheet should be 100
mm wide and pasted to each other with
bitumen @ 1.7 Kg/sqm.)
Metre
449.00
1058 Providing and Placing in position suitable PVC
water stops conforming to IS:12200 for
construction/ expansion joints between two
RCC members and fixed to the reinforcement
with binding wire before pouring concrete etc.
complete :
a) Serrated with central bulb (225mm wide, 8-
11mm thick).
Metre
489.00
b) Dumb bell with central bulb (180mm wide,
8mm thick).
Metre
460.00
c) Kickers (320mm wide, 5mm thick). 1.00 m 443.00 One Running
Metre
443.00
1059 Providing and laying water proofing treatment
in sunken portion of WCs, bathroom etc., by
applying cement slurry mixed with water
proofing cement compound consisting of
applying : a) First layer of slurry of cement @
0.488 kg/sqm mixed with water proofing
cement compound@ 0.253 kg/sqm. This layer
will be allowed to air cure for 4 hours. b)Second
layer of slurry of cement @0.242 kg/sqmmixed
with waterproofing cement compound @ 0.126
kg/sqm. This layer will be allowed to air cure for
4 hours followed with water curing for 48
hours. The rate includes preparation of surface,
treatment and sealing of all joints, corners,
junctions of pipes and masonry with polymer
mixed slurry.
Metre
255.00
water proofing treatment including preparation
of surface as required for treatment of roofs,
balconies, terraces etc consisting of following
operations:
a) Applying a slurry coat of neat cement using
2.75 kg/sqm. of cement admixed with water
proofing compound conforming to IS. 2645 and
approved by Engineer-in-charge over the RCC
slab including adjoining walls upto300mm
height including cleaning the surface before
treatment.
b) Laying brick bats with mortar using broken
bricks/brick bats 25 mm to115mm size with
50% of cement mortar 1:5 (1 cement : 5 coarse
sand)admixed with water proofing compound
conforming to IS : 2645 and approved by
Engineer-in-charge over 20 mm thick layer of
cement mortar of mix 1:5 (1 cement :5 coarse
sand ) admixed with waterproofing compound
conforming to IS : 2645 and approved by
Engineer-in-charge to required slope and
treating similarly the adjoining walls upto 300
mm height including rounding of junctions of
walls and slabs
c)After two days of proper curing applying a
second coat of cement slurry using 2.75kg/ sqm
of cement admixed with water proofing
compound conforming to IS : 2645 and
approved by Engineer-in-charge.
d)Finishing the surface with 20 mm thick
jointless cement mortar of mix1:4 (1 cement :4
coarse sand) admixed with water proofing
compound conforming to IS : 2645 and
approved by Engineer-in-charge including laying
glass fibre cloth of approved quality in top layer
of plaster and finally finishing the surface with
trowel with neat cement slurry and making
pattern of 300x300 mm square 3mm deep.
e) The whole terrace so finished shall be
flooded with water for a minimum period of
two weeks for curing and for final test. All
above operations to be done in order and as
directed and specified by the Engineer-in-
Charge :
a) With average thickness of 120mm and
minimum thickness at khurra as 65 mm.
Metre
883.00
1061 Providing and laying four courses water
proofing treatment with bitumen felt over roofs
consisting of first and third courses of blown
bitumen85/25 or 90/15 conforming to IS : 702
applied hot @1.45 Kg per square metre of area
for each course, second course of roofing felt
type 3grade-I (hessian based self finished
bitumen felt) and fourth and final course of
stone grit 6mm and down size or pea-sized
gravel spread at 6cubic decameter per square
metre including preparation of surface but
excluding grading complete with :
a) Bitumen felt (hessian base) type 3 grade I
conforming to IS : 1322
Metre
291.00
1062 Providing and laying six courses water proofing
treatment with bitumen felt over roofs
consisting of first, third and fifth course of
blown bitumen85/25 or 90/15 conforming to IS
: 702 applied hot @ 1.45, 1.20 and 1.45Kg per
square metre of area respectively, second and
fourth courses of roofing felt type 3 grade I
conforming to IS : 1322 (Hessian based self
finished bitumen felt) conforming to IS : 1322
and sixth and final course of stone grit 6 mm
and down size or pea sized gravel spread at 6
cubic dm per sqm including preparation of
surface but excluding grading, complete.
Metre
455.00
consisting of first, third and fifth courses of
blown or / and residual bitumen applied hot at
1.45, 1.20 and 1.70 kg per square metre of area
respectively, second and fourth courses of
roofing felt as per IS 7193 grade I (fibre base
self finished bitumen felt) six and final courses
of stone grit 6mm and down size or pea sized
gravel spread at 6cu.dm per sqm including
preparation of surface, excluding grading,
compete.
Metre
502.00
consisting of first, third and fifth courses of
blow or/ and residual bitumen applied hot at
1.45, 1.20 and 1.70 kg per square metre of area
respectively, second and fourth courses of
roofing felt as per IS 7193 Grade II (glass fibre
base self finished bitumen felt) and sixth and
final course of stone grit 6mm and down size or
pea sized gravel spread at 6cubic dm per sqm
including preparation of surface but excluding
grading, complete.
Metre
503.00
1065 Supplying and applying bituminous solution
primer on roof and or wall surface at 0.24 litre
per sqm.
Metre
29.00
1066 Deduct for omitting in water proofing treatment
final course of spreading stone grit 6mm down
size or pea sized gravel :
a) At 6 cudm per sqm. 1.00 Sqm -12.80 One Square
Metre
-13.00
b) at 8 cudm per sqm. 1.00 Sqm -16.25 One Square
Metre
-16.00
1067 Grading roof for water proofing treatment with
a) Cement concrete 1:2:4 (1 cement : 2 coarse
size)
Metre
5021.00
Metre
8116.00
c) Cement mortar 1:4 (1cement : 4 coarse sand) 1.00 Cum 7308.70 One Cubic
Metre
7309.00
1068 Providing and laying in situ seven course water
proofing treatment with APP (Atactic poly-
propylene) modified Polymeric membrane over
roof consisting of first coat of bitumen primer
@ 0.40Kg per sqm, 2nd, 4th &6th courses of
bonding material @ 1.20 Kg/sqm, which shall
consist of blown type bitumen of grade 85/25
conforming to IS : 702, 3rd and 5thlayers of
roofing membrane APP modified Polymeric
membrane 1.5mmthick of 2.25 Kg/sqm weight
consisting of five layers prefabricated with
centre core as 20micron HMHDPE film
sandwiched on both sides with polymeric mix
and the polymeric mix is protected on both side
with20micron HMHDPE film. 7th, the top most
layer shall be finished with brick tiles of class
designation 10 grouted with cement mortar
1:3(1cement:3 fine sand) mixed with 2%
integral water proofing compound by weight of
cement over a 12mm layer of cement mortar
1:3 (1 cement: 3 fine sand) and finished neat (
item of laying brick tiles shall be paid for
separately).
Metre
412.00
1069 Providing and laying in situ five course water
proofing treatment with APP (Atactic
Polypropylene) modified Polymeric membrane
over roof consisting of first coat of bitumen
primer @ 0.40Kg per sqm, 2nd & 4thcourses of
bonding material @ 1.20 Kg/sqm, which shall
consist of blown type bitumen of grade 85/25
conforming to IS : 702, 3rd layer of roofing
membrane APP modified Polymeric membrane
2.0mm thick of 3.00 Kg/sqm weight consisting
of five layers prefabricated with centre core as
100micron HMHDPE film sandwiched on both
sides with polymeric mix and the polymeric mix
is protected on both side with 20 micron
HMHDPE film. 5th, the top most layer shall be
finished with brick tiles of class designation 10
grouted with cement mortar 1:3 (1cement : 3
fine sand) mixed with 2% integral water
proofing compound by weight of cement over a
12mm layer of cement mortar 1:3 (1 cement: 3
fine sand) and finished neat ( item of laying
brick tiles shall be paid for separately).
Metre
315.00
1070 Providing and laying in situ seven course water
proofing treatment with APP (Atactic
Polypropylene) modified Polymeric membrane
over roof consisting of first coat of bitumen
primer @ 0.40Kg per sqm, 2nd, 4th &6th
courses of bonding material @ 1.20 Kg/sqm,
which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd and
5thlayers of roofing membrane APP modified
Polymeric membrane 2.0mmthick of 3.00
Kg/sqm weight consisting of five layers
prefabricated with centre core as 100micron
HMHDPE film sandwiched on both sides with
polymeric mix and the polymeric mix is
protected on both side with20micron HMHDPE
film. 7th, the top most layer shall be finished
with brick tiles of class designation 10 grouted
with cement mortar 1:3 (1cement : 3 fine sand)
mixed with 2% integral water proofing
compound by weight of cement over a 12 mm
layer of cement mortar 1:3 ( 1cement : 3 fine
sand) and finished neat (item of laying brick
tiles shall be paid for separately).
Metre
512.00
1071 Providing and fixing APP (Atactic Polypropylene
Polymer) modified prefabricated five layer 2mm
thick water proofing membrane, black finished
reinforced with glass fibre matt consisting of a
coat of bitumen primer for bitumen membrane
@ 0.40 ltr/sq. mtr. by the same membrane
manufacture of density at 25C, 0.87 - 0.89 kg/
ltr and viscocity 70 - 160 cps. Over the primer
coat the layer of membrane shall be laid using
Butane torch and sealing all joints etc., and
preparing the surface complete. The vital
physical and chemical parameters of the
membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23C as
350/300 N/ 5cm. Tear strength in longitudinal
and transverse direction as 60/80N. Softening
point of membrane not less than 150C. Cold
flexibility shall be upto -2C when tested in
accordance with ASTM, D - 5147. The laying of
membrane shall be got done through the
authorised applicator of the manufacturer of
membrane :
a) 2mm (for corrugated roof sheets) 1.00 Sqm 348.65 One Square
Metre
349.00
1072 Providing and laying APP (Atactic Polypropylene
Polymer) modified prefabricated five layer,
3mm thick water proofing membrane, black
finished reinforced with glass fibre matt
consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 ltr/sqm. by the
same membrane manufactured of density at
25C, 0.87 - 0.89 kg/ltr and viscosity 70 -160
cps. Over the primer coat the layer of
membrane shall be laid using butane torch and
sealing all joints etc., and preparing the surface
complete. The vital physical and chemical
parameters of the membrane shall be as under :
Joint strength in longitudinal and transverse
direction at 23C as 350/300 N/5cm. Tear
strength in longitudinal and transverse direction
as 60/80N. Softening point of membrane not
less than 150C.Cold flexibility shall be upto -
2C when tested in accordance with ASTM,D -
5147. The laying of membrane shall be got done
through the authorised applicator of the
manufacture of membrane.
Metre
400.00
1073 Providing and laying APP (Atactic Polypropylene
Polymer) modified prefabricated five layer 3mm
thick water proofing membrane, black finished
reinforced with non-woven polyester matt
consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 ltr/sqm. by the
same membrane manufacture of density at
25C, 0.87-0.89 kg/ltr and viscocity 70-160 cps.
Over the primer coat the layer of membrane
shall be laid using Butane Torch and sealing all
joints etc., and preparing the surface complete.
The vital physical and chemical parameters of
the membrane shall be as under : Joint strength
in longitudinal and transverse direction at 23C
as 650/450N/5cm. Tear strength in longitudinal
and transverse direction as 300/250N.
Softening point of membrane not less than
150C. Cold flexibility shall be upto -2C when
tested in accordance with ASTM, D - 5147. The
laying of membrane shall be got done through
the authorised applicator of the manufacturer
of membrane :
Metre
448.00
1074 Extra for covering top of membrane with
Geotextile, 120gsm non woven, 100% polyester
of thickness 1 to 1.25mm bonded to the
membrane with intermittent touch by heating
the membrane by Butane Torch as per
manufactures recommendation.
Metre
65.00
29558.00
1075 Trenching in ordinary soil up to a depth of 60cm
including removal and stacking of serviceable
materials and then disposing of surplus soil, by
spreading and neatly leveling within a lead of
50mand making up the trenched area to proper
levels by filling with earth or earth mixed with
sludge or/and manure before and after flooding
trench with water(excluding cost of imported
earth, sludge or manure).
1.00 Cum 37.10 37.00
Total of the Sub-Head - Water Proofing :
Sub-Head : Horticulture & Landscaping
1076 Supplying and stacking of good earth at site
including royalty and carriage upto 1 km (earth
measured in stacks will be reduced by 20% for
payment).
Metre
308.00
1077 Supplying and stacking sludge at site including
royalty and carriage upto 1 km (sludge
measured in stacks will be reduced by 8% for
payment).
Metre
239.00
1078 Supplying and stacking at site dump manure
from approved source, including carriage upto 1
km (manure measured in stacks will be reduced
by 8% for payment) :
a) Screened through sieve of I.S. designation
20mm
1.00 Cum 167.60 168.00
b) Screened through sieve of I.S. designation
16mm
Metre
185.00
c) Screened through sieve of I.S. designation
4.75mm
Metre
199.00
1079 Rough dressing the trenched ground including
breaking clods.
100.00 Units 71.80 100 Square
Metre
72.00
1080 Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation.
100.00 Units 233.05 100 Square
Metre
233.00
1081 Fine dressing of the ground 100.00 Units 175.30 100 Square
Metre
175.00
1082 Spreading of sludge, dump manure and / or
good earth in required thickness as per
direction of Officer-in-charge (Cost of sludge,
dump manure and / or good earth to be paid
separately).
100.00 Cum 25.15 100 Square
Metre
25.00
1083 Mixing earth and sludge or manure in the
required proportion specified or directed by the
Officer-in-charge..
Metre
17.00
1084 Grassing with selection No.1 grass including
watering and maintenance of the lawn for 30
days or more till the grass forms a thick lawn,
free from weeds and fit for mowing including
supplying good earth, if needed (the good earth
a) In rows 5 cm apart in both directions. 100.00 Units 841.25 100 Square
Metre
841.00
b) With grass Turf. 100.00 Units 634.30 100 Square
Metre
634.00
1085 Renovating lawns including weeding, cheeling
the grass, forking the ground, top dressing with
sludge or manure, mixing the same with forked
soil, watering and maintaining the lawn for 30
days or more till the grass forms a thick lawn
free from weeds and fit for mowing and
disposal of rubbish as directed, including
supplying good earth if needed but excluding
the cost of sludge or manure (the good earth
100.00 Units 1626.75 100 Square
Metre
1627.00
1086 Uprooting rank vegetation and weeds by
digging the area to a depth of 60cm, removing
all weeds and other growth with roots by
forking repeatedly, breaking clods, rough
dressing, flooding with water, uprooting fresh
growths after 10 to 15 days and then fine
dressing for planting new grass, including
disposal of all rubbish with all leads and lifts.
100.00 Units 2887.60 100 Square
Metre
2888.00
1087 Preparation of beds for hedging and shrubbery
by excavating 60cm deep and trenching the
excavated base to a further depth of 30cm,
refilling the excavated earth after breaking
clods and mixing with sludge or manure in the
ratio of 8:1 (8 parts of stacked volume of earth
after reduction by 20%: one part of stacked
volume of sludge or manure after reduction by
8%),flooding with water, filling with earth if
necessary, watering and finally fine dressing,
leveling etc. including stacking and disposal of
materials declared unserviceable and surplus
earth by spreading and leveling as directed,
within a lead of 50 m, lift up to 1.5 m complete
(cost of sludge, manure or extra earth to be
100.00 Cum 105.20 100 Square
Metre
105.00
1088 Digging holes in ordinary soil and refilling the
same with the excavated earth mixed with
manure or sludge in the ratio of 2:1 by volume
(2 parts of stacked volume of earth after
reduction by 20% : 1 part of stacked volume of
manure after reduction by 8%) flooding with
water, dressing including removal of rubbish
and surplus earth, if any, with all leads and lifts
(cost of manure, sludge or extra good earth if
needed to be paid for separately) :
a) Holes 1.2 m dia and 1.2 m deep. 1.00 No. 211.90 212.00
b) Holes 90 cm dia, and 90 cm deep. 1.00 No. 90.90 Each 91.00
c) Holes 60 cm dia, and 60 cm deep. 1.00 No. 28.00 Each 28.00
d) Holes 45 cm dia, and 45 cm deep. 1.00 No. 12.15 Each 12.00
1089 Half brick circular tree guard in bricks, internal
diameter 1.25 metre and height 1.2 metre
above ground and 0.20 m below ground,
bottom two courses laid dry and top three
courses in cement mortar 1:6 (1 cement : 6fine
sand) and the intermediate courses being in dry
honey comb masonry as per design complete:
bricks of class designation 5.
1.00 No. 1241.55 1242.00
1090 Providing and fixing M.S. flat iron tree guard 60
cmdia. and 2 mhigh, above ground consisting 4
nos. 25 x 6 mm, 2.25 m long and 8 nos. 25 x
3mm 2 m long verticals M.S. flats, riveted to 3
nos. 25 x 6 mm M.S. flat ironrings in two halves,
fixing together at site with required six numbers
of 8mm dia. and 30 mm long bolts, including
painting two coats with synthetic enamel paint
of approved brand and manufacture over a coat
of primer. One name plate of 1 mm thick M.S.
sheet of size 250x100 mm shall be welded to
the tree guard near the middle height and
lettered CPWD /PWD/ any other approved
name. The tree guard shall be suitably fixed to
the ground by embedding four legs of tree
guard in pits of suitable dia and to a depth of 25
cm, refilling the pits with soil and ramming,
complete in all respect as per satisfaction and
direction of Officer-in-charge.
1.00 No. 2884.15 Each 2884.00
1091 Making tree guard 53 cm dia. and 1.3 m high as
per design from empty coal tar drums, supplied
free by the department, including providing and
fixing 2 nos. M.S. sheet rings 50 x 0.5 mm fixed
with rivets complete in all respects including
painting inside and outside of tree guard with :
a) A coat of coal tar. 1.00 No. 230.90 231.00
b) Two or more coats of synthetic enamel paint of
approved quality shade over a priming coat.
1.00 No. 356.50 Each 357.00
1092 Making tree guard 53 cm dia. and 2 m high as
per design from empty coal tar drums, supplied
free by the department, including providing and
fixing four legs 40 cm long of 30 x 3 mm M.S.
flat riveted to tree guard and providing and
fixing 2 nos. M.S. sheet rings 50 x 0.5 mm fixed
with rivets complete in all respects including
painting inside and outside of tree guard with :
a) A coat of coal tar. 1.00 No. 444.90 445.00
b) Two or more coats of synthetic enamel paint of
approved brand and shade over a priming coat.
1.00 No. 638.25 Each 638.00
1093 Edging with bricks laid dry length wise, including
required excavation, refilling, consolidating with
hand packing and spreading surplus earth
neatly within a lead of 50 m :
a) Common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
1.00 m 36.00 36.00
1094 Filling mixture of earth and sludge or manure in
the desired proportion in trenches, flooding
with water and leveling (cost of supplying earth
and sludge or manure and mixing excluded).
1.00 Cum 8.60 One Running
Metre
9.00
1095 Excavation in dumped stones or malba
including stacking of serviceable and
unserviceable material separately and disposal
of unserviceable material, lead up to 50 m and
lift up to 1.5 m, disposed material to be neatly
dressed.
Metre
242.00
1096 Excavation in bajri path including stacking of
serviceable and unserviceable material
separately, lead up to 50 m and lift up to 1.5 m,
disposed material to be neatly dressed.
Metre
269.00
1097 Excavation in water bound macadam road
including stacking the serviceable and
unserviceable material separately and disposal
of unserviceable material, lead up to 50 m and
lift up to 1.5 m, disposed material to be neatly
dressed.
Metre
331.00
1098 Flooding the ground with water including
making kiaries and dismantling the same.
100.00 Units 129.50 100 Square
Metre
130.00
1099 Supplying and stacking of well decayed cow
dung manure at site including carriage complete
(Cow dung manure measured in stacks will
reduced by 8% for Payment).
100.00 Cum 190.40 100 Square
Metre
190.00
1100 Providing and fixing M. S. tree guard 45 cm
square in plan, height 1.20 metre above ground
level and 0.40 metre below ground level. The
vertical members shall consist of four nos. angle
iron of size 25x25x3mm, 1.8 m long, one at
each corner and 8 nos. flat iron of size 25x3
mm,1.2 m long. The vertical members shall be
welded to 4 nos. 25x6 mm M.S. flats placed
horizontally around the vertical member of the
cage. One name plate of 1 mm thick M.S. sheet
of size 250x100 mm shall be welded to the tree
guard near the middle height and lettered
CPWD / PWD/ any other approved name. The
tree guard shall be fixed to the ground by
making suitable holes and by embedding four
corners leg in the ground, including refilling the
earth, compaction etc. complete. The tree
guard shall be painted with two or more coats
of synthetic enamel paint of approved brand
and manufacture over a coat of primer,
complete in all respect.
1.00 No. 1713.85 One Cubic
Metre
1714.00
1101 Providing and fixing M. S. tree guard 50 cm
square in plan, height 1.40 metre above ground
level and 0.50 metre below ground level. The
vertical members shall consist of four nos. of
angle iron of size 25x25x5mm 1.9 long, one at
each corner and 8 nos. flat iron of size 25x5 mm
1.4long. The vertical members shall be welded
to 4 nos. 25x6 mm M. S. flats placed
horizontally around the vertical member of the
cage. One nameplate of 1 mm thick M.S. sheet
of size 250x100 mm shall be welded to the tree
guard near the middle height and lettered
CPWD / PWD/ any other approved name. The
tree guard shall be fixed to the ground by
making suitable holes and by embedding four
corners leg in the ground , including refilling the
earth , compaction etc. complete. The tree
guard shall be painted with two coats of paint
of approved brand and manufacture over a coat
of primer, complete in all respect.
1.00 No. 2689.95 Each 2690.00
1102 Preparation of mounds of various size and
shape by available excavated / supplied earth in
layers not exceeding 20 cm in depth, breaking
clods, watering of each layer, dressing etc., lead
upto 50 meter and lift upto 1.5m complete as
per direction of Officer-in-charge.
1.00 No. 215.60 Each 216.00
1103 Providing Circular Cement Concrete pots of
specified size, cast with cement concrete of
nominal mix 1:2:4 (1 cement: 2 coarse sand: 4
graded stone aggregate 6 mm nominal size),
reinforced with 7 Nos. ( 3 nos. horizontal & 4
nos. vertical "U" shape) M.S. wires of 3.5 mm
dia as per design , including required form
work, finishing with cement punning on
exposed surface, curing for specified period and
stacking in required rows & height , all
complete as per direction of Officer-in-charge.
a) Top inside dia 35 cm, outer bottom dia 25 cm,
total height 35 cm with wall thickness of 25.4
mm.
1.00 No. 166.25 166.00
b) Top inside dia 30 cm, outer bottom dia 20 cm,
total height 30 cm with wall thickness of 25.4
mm.
1.00 No. 121.75 Each 122.00
1104 Providing Square Cement Concrete pots of
specified size, cast with cement concrete of
nominal mix 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 6 mm nominal size),
reinforced with 7 nos. ( 3 nos horizontal & 4 nos
vertical "U" shape) M.S. wires of 3.5 mm dia as
per design, including required form work,
finishing with cement punning on exposed
surface, curing for specified period and stacking
in required rows & height , all complete as per
direction of Officer-in-charge.
a) Top inner width 35 cm, outer bottom width 25
cm, total height 35 cm and wall thickness 25.4
mm.
1.00 No. 200.55 Each 201.00
20209.00 Total of the Sub-Head - Horticulture & Landscaping :
Sub-Head : Rain Water Harvesting
1105 Boring/drilling bore well of required dia for
casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including
collecting samples from different strata,
preparing and submitting strata chart/bore log,
including hire & running charges of all
equipments, tools, plants & machineries
required for the job, all complete as per
direction of Engineer -in-charge, upto 90 metre
depth below ground level.
a) All types of soil
(i) 300 mm dia. 1.00 m 398.25 One Running
Metre
398.00
(ii) 350 mm dia. 1.00 m 435.60 One Running
Metre
436.00
(iii) 400 mm dia. 1.00 m 557.55 One Running
Metre
558.00
b) Rocky strata including Boulders.
Metre
892.00
Metre
926.00
Metre
1044.00
1106 Boring/drilling bore well of required dia for
casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including
collecting samples from different strata,
preparing and submitting strata chart/bore log,
including hire & running charges of all
equipments, tools, plants & machineries
required for the job, all complete as per
direction of Engineer -in-charge, beyond 90
metre & upto 150 metre depth below ground
level.
a) All types of soil
Metre
465.00
Metre
516.00
Metre
697.00
b) Rocky strata including Boulders.
Metre
953.00
Metre
983.00
Metre
1234.00
1107 Supplying, assembling, lowering and fixing in
vertical position in bore well, unplasticized PVC
medium well casing (CM) pipe of required dia,
conforming to IS: 12818, including required hire
and labour charges, fittings & accessories etc.
all complete, for all depths, as per direction of
Engineer -in-charge.
a) 100 mm nominal size dia. 1.00 m 423.85 One Running
Metre
424.00
b) 150 mm nominal size dia. 1.00 m 586.65 One Running
Metre
587.00
c) 200 mm nominal size dia. 1.00 m 878.25 One Running
Metre
878.00
vertical position in bore well unplasticized PVC
medium well screen (RMS) pipes with ribs,
conforming to IS: 12818, including hire & labour
charges, fittings &accessories etc. all complete,
for all depths, as per direction of Engineer-in-
charge.
Metre
447.00
Metre
529.00
Metre
820.00
1109 Supplying, filling, spreading & leveling stone
boulders of size range 5 cm to 20 cm, in
recharge pit, in the required thickness, for all
leads &lifts, all complete as per direction of
Engineer-in-charge.
Metre
495.00
1110 Supplying, filling, spreading & leveling gravels of
size range 5 mm to 10 mm, in the recharge pit,
over the existing layer of boulders, in required
thickness, for all leads & lifts, all complete as
Metre
901.00
1111 Supplying, filling, spreading & leveling coarse
sand of size range 1.5 mm to 2 mm in recharge
pit, in required thickness over gravel layer, for
all leads & lifts, all complete as per direction of
Engineer -in -charge.
Metre
843.00
1112 Gravel packing in tube well construction in
accordance with IS: 4097, including providing
gravel fine/ medium/ coarse, in required
grading &sizes as per actual requirement, all
Metre
977.00
1113 Providing and fixing factory made precast RCC
perforated drain covers, having concrete of
strength not less than M-25, of size 1000
x450x50 mm, reinforced with 8 mm dia four no
longitudinal & 9 nos cross sectional T.M.T. hoop
bars, including providing 50 mm dia
perforations @ 100 to 125 mm c/c, including
providing edge binding with M.S. flats of size 50
mm x 1.6 mm complete, all as per direction of
Engineer-in-charge.
1.00 No. 958.80 Each 959.00
vertical position in bore well, ERW (Electric
Resistance Welded) FE 410 mild steel screwed
and socketed/ plain ended casing pipes of
required dia, conforming to IS: 4270, of reputed
& approved make, including painted with
outside surface with two coats of anticorrosive
paint of approved brand and manufacture,
including required hire & labour charges,
fittings &accessories, all complete, for all
depths, as per direction of Engineer-in-charge.
a) 100 mm nominal size dia having minimum wall
thickness 5.00 mm
Metre
974.00
b) 150 mm nominal size dia having minimum wall
thickness 5.00 mm
Metre
1329.00
c) 200 mm nominal size dia having minimum wall
thickness 5.40 mm
Metre
1631.00
vertical position in bore well, ERW (Electric
Resistance Welded) FE 410 plain slotted (having
slot of size 1.6/3.2 mm) mild steel threaded and
socketed / plain bevel ended pipe (type A) of
required dia, conforming to IS: 8110, of reputed
and approved make, having wall thickness not
less than 5.40 mm, including painted with
outside surface with two coats of anticorrosive
bitumestic paint of approved brand and
manufacture, including hire &labour charges,
fittings & accessories, all complete, for all
depths, as per direction of Engineer -in -in-
charge.
Metre
1033.00
Metre
1409.00
Metre
1711.00
1116 Development of tube well in accordance with IS
: 2800 (part I) and IS: 11189, to establish
maximum rate of usable water yield without
sand content (beyond permissible limit), with
required capacity air compressor, running the
compressor for required time till well is fully
developed, measuring yield of well by "V" notch
method or any other approved method,
measuring static level & draw down etc. by step
draw down method, collecting water samples &
getting tested in approved laboratory, i/c
disinfection of tube well, all complete, including
hire & labour charges of air compressor, tools &
accessories etc., all as per requirement and
1.00 hours 614.75 One Hour 615.00
1117 Providing and fixing suitable size threaded mild
steel cap or spot welded plate to the top of
bore well housing/ casing pipe, removable as
per requirement, all complete for bore well of:
a) 100 mm dia 1.00 No. 158.55 Each 159.00
b) 150 mm dia 1.00 No. 195.15 Each 195.00
c) 200 mm dia 1.00 No. 243.90 Each 244.00
1118 Providing and fixing M.S. clamp of required dia
to the top of casing/ housing pipe of tube well
as per IS: 2800 (part I), including necessary bolts
& nuts of required size complete.
a) 100 mm clamp. 1.00 No. 1092.20 Each 1092.00
b) 150 mm clamp. 1.00 No. 1154.25 Each 1154.00
c) 200 mm clamp. 1.00 No. 1310.15 Each 1310.00
1119 Providing and fixing Bail plug/ Bottom plug of
required dia to the bottom of pipe assembly of
tube well as per IS:2800 (part I).
a) 100 mm dia 1.00 No. 195.70 Each 196.00
b) 150 mm dia 1.00 No. 242.15 Each 242.00
c) 200 mm dia 1.00 No. 265.10 Each 265.00
30521.00
1120 Raking out joints of stone masonry surface to
the required width and depth, with due care
and precaution, by mechanical / manual means,
including preparing and cleaning the surface for
re-pointing/ refilling of joints, including disposal
of rubbish to the dumping ground within 50
metre lead.
Metre
24.00
1121 Providing and fixing double scaffolding system
(cup lock type) on the exterior side of
building/structure, upto 25 metre height, above
ground level, including additional rows of
scaffolding in stepped manner as per
requirement of site, made with 40mm dia. M.S.
tube, placed 1.5 metre centre to centre,
horizontal & vertical tubes joint with cup & lock
system with M.S. Tubes, M.S. tube challis, M.S.
clamps and staircase system in the scaffolding
for working platform etc. and maintaining it in a
serviceable condition for execution of work of
cleaning and/ or pointing and/ or applying
chemical and removing it thereafter. The
scaffolding system shall be stiffened with
bracings, runners, connecting with the building
etc, wherever required, if feasible, for
inspection of work at required locations with
essential safety features for the workmen etc.,
complete as per directions and approval of
Engineer-in- charge.
Note :- (1) The elevational area of the
scaffolding shall be measured for payment
purpose.
(2) The payment will be made once only for
execution of all items for such works.
Metre
149.00
Sub-Head : Preservation of Heritage Buildings
Total of the Sub-Head - Rain Water Harvesting :
1122 Cleaning the sand stone surface and removing
dirt, dust, bird dropping, grease, oil, algae,
fungus, monkey beats, vegetable growth etc.,
including providing, applying and washing the
surface with liquid Ammonia Chemical of 5%
solution and other chemical cleaning agent as
approved by Archaeological Survey of India/
Engineer-in-charge, of approved brand and
manufacturer, with the help of required
scrubbers and also cleaning with machine
operated water jet mixed with desired quantity
of fine silica where ever required, without
causing any scratching/ damage to the stone
surface and finally washing the surface with
clean water with the help of pressure jet
machine, complete in all respect, including
taking all precautions to safeguard ventilators,
windows, doors etc. by suitable covering so as
to avoid any damage to the building/ structure,
all as per direction of Engineer-in-charge (The
rate is inclusive of all materials &labours
involved except scaffolding).
Metre
74.00
1123 Providing and applying antifungal wash
treatment using 3% solution of sodium penta
chlorophenate, of reputed brand and
manufacturer, on cleaned sand stone surface at
desired locations as per direction of Engineer-in-
charge (The rate is inclusive of all materials &
labours involved except scaffolding).
Metre
31.00
1124 Ruled /Flush pointing on Red sand stone
masonry surface with lime, surkhi and marble
dust mortar in the ratio of 1:1.5:1/2 {One lime:
1.5surkhi (50% red and 50% light yellow surkhi
):1/2 marble dust}. (The rate is inclusive of all
materials & labours involved except
scaffolding).
Metre
130.00
1125 Ruled/ Flush pointing on White sand stone
masonry surface with lime, surkhi and marble
dust mortar in the ratio of 1:1.5:1/2 {One
lime:1.5 surkhi(15% dark red and 85% light
yellow surkhi ):1/2 marble dust}. (The rate is
inclusive of all materials & labours involved
except scaffolding).
Metre
130.00
1126 Applying two or more coat of Ethyl Silicate
chemical as approved by Archaeological Survey
of India/ Engineer-in-charge, of approved brand
and manufacturer, with brush or spray on the
existing stone masonry surface till there is no
further absorption of chemical by stone surface,
including protecting the applied surface from
direct sunlight by suitable means during
application, all complete as per direction of the
Engineer-in-Charge (The rate is inclusive of all
materials & labours involved except
scaffolding).
Metre
262.00
1127 Applying breathable, non-reactive, antifungal,
and water repellant Silane/ Siloxane chemical
as approved by Archaeological Survey of India/
Engineer-in-charge, of approved brand and
manufacture, diluted with solvent mineral
Turpentine oil in the ratio of 1:12 (One part of
approved chemical :12 Part of Turpentine oil),
on the existing sand stone masonry surface
with two or more coats to give uniform
application of chemical on the surface, all
complete as per direction of Engineer-In-charge
(The rate is inclusive of all materials & labours
involved except scaffolding).
Metre
79.00
879.00
1128 Providing and supplying aluminium extruded
tubular and other aluminium sections as per the
architectural drawings and approved shop
drawings , the aluminium quality as per grade
6063 T5 or T6 as per BS 1474,including super
durable powder coating of 60-80 microns
conforming to AAMA 2604 of required colour
and shade as approved by the Engineer-in-
Charge. (The item includes cost of material such
as cleats, sleeves, screws etc. necessary for
fabrication of extruded aluminium frame work.
Nothing extra shall be paid on this account).
1.00 Kg 338.25 One Kilogram 338.00
1129 Designing, fabricating, testing, protection,
installing and fixing in position semi (grid)
unitized system of structural glazing (with open
joints) for linear as well as curvilinear portions
of the building for all heights and all levels
including:
Total of the Sub-Head - Preservation Of Heritage Buildings :
Sub-Head : Structural Glazing and ACP Panel
a) Structural analysis & design and preparation
of shop drawings for the specified design loads
conforming to IS 875 part III (the system must
passed the proof test at 1.5 times design wind
pressure without any failure), including
functional design of the aluminum sections for
fixing glazing panels of various thicknesses,
aluminium cleats, sleeves and splice plates etc.
gaskets, screws, toggles, nuts, bolts, clamps
etc., structural and weather silicone sealants,
flashings, fire stop (barrier)-cum-smoke seals,
microwave cured EPDM gaskets for water
tightness, pressure equalisation & drainage and
protection against fire hazard including:
b) Fabricating and supplying serrated M.S. hot
dip galvanised / Aluminium alloy of 6005 T5
brackets of required sizes, sections and profiles
etc. to accommodate 3 Dimentional movement
for achievingperfect verticality and fixing
structural glazing system rigidly to the RCC/
masonry/structural steel framework of building
structure using stainless steel anchor fasteners/
bolts, nylon seperator to prevent bimetallic
contacts with nuts and washers etc. of stainless
steelgrade 316, of the required capacity and in
required numbers.
c) Providing and filling, two part pump filled,
structural silicone sealant and one part weather
silicone sealant compatible with the structural
silicone sealant of required bite size in a clean
and controlled factory / work shop environment
, including double sided spacer tape, setting
blocks and backer rod, all of approved grade,
brand and manufacture, as per the approved
sealant design, within and all around the
perimeter for holding glass.
d) Providing and fixing in position flashings of
solid aluminium sheet 1 mm thick and of sizes,
shapes and profiles, as required as per the site
conditions, to seal the gap between the building
structure and all its interfaces with curtain
glazing to make it watertight.
e) Making provision for drainage of moisture/
water that enters the curtain glazing system to
make it watertight, by incorporating principles
of pressure equalization, providing suitable
gutter profiles at bottom (if required), making
necessary holes of required sizes and of
required numbers etc. complete. This item
includes cost of all inputs of designing, labour
for fabricating and installation of
aluminiumgrid, installation of glazed units, T&P,
scaffolding and other incidental charges
including wastages etc., enabling temporary
structures and services, cranes or cradles etc. as
described above and as specified.The item
includes the cost of getting all the structural
and functional design including shop drawings
checked by a structural designer, dully
approved by Engineer-in-charge. The item also
includes the cost of all mock ups at site, cost of
all samples of the individual components for
testing in an approved laboratory, field tests on
the assembled working structural glazing as
specified, cleaning and protection till the
handing over of the building for occupation. In
the end, the Contractor shall provide a water
tight structural glazing having all the
performance characteristics etc. all complete as
required, as per the Architectural drawings, as
Metre
2467.00
Note:- 1. The cost of providing extruded
aluminium frames, shadow boxes, extruded
aluminium section capping for fixing in the
grooves of the curtain glazing and vermin proof
stainless steel wire mesh shall be paid for
separately under relevant items under this
subhead. However, for the purpose of payment,
only the actual area of structural glazing
(including width of grooves ) on the external
face shall be measured in sqm. up to two
decimal places.
Note:-2. The following performance test are to
be conducted on structural glazing system if
area of structural glazing exceeds 2500 Sqm
from the certified laboratories accreditated by
NABL(National Accreditation Board for Testing
and Calibration Laboratories), Department of
Science & Technologies, India. Cost of testing is
payable separately. The NIT approving authority
will decide the necessity of testing on the basis
of cost of the work, cost of the test and
importance of the work. Performance Testing of
Structural glazing system Tests to be conducted
in the NBL Certified laboratories
1. Performance Laboratory Test for Air Leakage
Test (-50pa to 300pa) & (+50pa to +300pa) as
per ASTM E-283-04 testing method for a range
of testing limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to
1500pa) as per ASTME- 331-09 testing method
for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa)
as per AAMA 501.01- 05 testing method for a
range upto 2000 ml
4. Structural Performance Deflection and
deformation by static air pressure test (1.5
times desing wind pressure without any failure)
as per ASTME-330-10 testing method for a
range upto 50 mm.
5. Seismic Movement Test (upto 30 mm) as per
AAMA 501.4-09 testing method for Qualitative
test Tests to be conducted on site
6. Onsite Test for Water Leakage for a pressure
range 50 kpa to 240 kpa (35psi) upto 2000ml.
1130 Providing, assembling and supplying vision glass
panels (IGUs) comprising of hermetically-sealed
6-12- 6 mm insulated glass (double glazed)
vision panel units of size and shape as required
and specified,comprising of an outer heat
strengthened float glass 6mm thick, of
approved colour and shade with reflective soft
coating on surface # 2 of approved colour and
shade, an inner Heat strengthned clear float
glass 6mm thick, spacer tube 12mm wide,
dessicants, including primary seal and
secondary seal (structural silicone sealant) etc.
all complete for the required performances, as
per the Architecturaldrawings, as per the
approved shop drawings, as specified and as
directed by the Engineer-in-Charge. The IGUs
shall be assembled in the factory/ workshop of
the glass processor. (Payment for fixing of IGU
Panels in the curtain glazing is included in cost
of item No.26.2) For payment, only the actual
area of glass on face # 1 of the glass panels
(excluding the areas of the grooves and
weather silicone sealant) provided and fixed in
position, shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick
substrate with reflective soft coating on face #
2, + 12mm Airgap + 6mm Heat Strengthened
clear Glass of approved make having properties
as visible Light transmittance (VLT) of 25 to 35
%, Light reflection internal 10 to 15%, light
reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3
W/m2 degree K etc. The properties of
performance glass shall be decided by technical
sanctioning authority as per the site
requirement.
Metre
3949.00
1131 Extra for openable side / top hung vision glass
panels (IGUs) including providing and supplying
at site all accessories and hardwares for the
openable panels as specified and of the
approved make such as heavy duty stainless
steel friction hinges, min 4 -point cremone
locking sets with stainless steel plates, handles,
buffers etc. including necessary stainless steel
screws/ fasteners, nuts, bolts, washers etc. all
complete as per the Architectural drawings, as
per the approved shop drawings, as specified
and as directed by the Engineerin- Charge.
Metre
3032.00
1132 Providing, fabricating and supplying shadow
box of required size and shape, for fixing in the
spandrel portion of the structural glazing, in
linear as well as curvilinear portions of the
building by providing semi -rigid, inorganic, non-
combustible fibre glass wool insulation 50 mm
thick, conforming to IS: 8183 and BS: 3958 Part
5. The insulation layer shall have facing (factory
bonded on surface # 1of the fibre glass
insulation layer), of black non-woven fibre glass
tissue of nominal thickness 0.5 mm and
nominal mass not less than 60 gm / sqm, made
of randomly oriented glass fibres distributed in
a binder by a wet-lay process including fixing
1.5 mm thick solid aluminum sheet backing
using, 6 mm thick cement board including SS
rivets, nuts, bolts, washers etc complete.
Metre
1631.00
1133 Providing and supplying Spandrel Glass Panels
comprising of 6 mm thick heat strengthened
monolithic float glass of approved colour and
shade with reflective soft coating on surface # 2
of approved colour and shade so as to match
the colour and shade of the IGUs in the vision
panels etc. ,all complete for the required
performances as specified, as per the
Architectural drawings, as per the approved
shop drawings, as specified, and as directed by
the Engineer- in- Charge. For payment, only the
actual area of glass on face # 1 of the glass
panels (but excluding the area of grooves and
weather silicone sealant) provided and fixed in
position, shall be measured in sqm.(Payment
for fixing of Spandrel Glass Panels in the curtain
glazing is included in cost of relevent Item*).
(i) Coloured tinted float glass 6mm thick
substrate with reflective soft coating on face #
2, having properties as visible Light
transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection
external 10 to 20 %, shading coefficient (0.25-
0.28) and U value of 3.0 to 3.3 W/m2 degree K
etc. . The properties of performance glass shall
be decided by technical sanctioning authority as
per the site requirement.
Metre
2862.00
1134 Designing, fabricating, testing, installing and
fixing in position Curtain Wall with Aluminium
Composite Panel Cladding, with open grooves
for linear as well as curvilinear portions of the
building , for all heightsand all levels etc.
including:
a) Structural analysis & design and preparation
of shop drawings for pressure equalisation or
rain screen principle as required, proper
drainage of water to make it watertight
including checking of all the structural and
functional design.
b) Providing, fabricating and supplying and
fixing panels of aluminium composite panel
cladding in pan shape in metalic colour of
approved shades made out of 4mm thick
aluminium composite panel material consisting
of 3mm thick FR grade mineral core sandwiched
between two Aluminium sheets (each 0.5mm
thick). The aluminium composite panel cladding
sheet shall be coil coated, with Kynar 500 based
PVDF / Lumiflon based fluoropolymer resin
coating of approved colour and shade on face #
1 and polymer (Service) coating on face # 2 as
specified using stainless steel screws, nuts,
bolts, washers, cleats, weather silicone sealant,
backer rods etc.
(c) The fastening brackets of Aluminium alloy
6005 T5 / MS with Hot Dip Galvanised with
serrations and serrated washers to arrest the
wind load movement, fasteners, SS 316 Pins
and anchor bolts of approved make in SS 316,
Nylon separators to prevent bi-metallic contacts
all complete required to perform as per
specification and drawing
The item includes cost of all material & labour
component, the cost of all mock ups at site,
cost of all samples of the individual
components for testing in an approved
laboratory, field tests on the assembled
working curtain wall with aluminium composite
panel cladding, cleaning and protection of the
curtain wall with aluminium composite panel
cladding till the handing over of the building for
occupation. Base frame work for ACP cladding
is payable under the relevant aluminium item.s
The Contractor shall provide curtain wall with
aluminium composite panel cladding, having all
the performance characteristics all complete ,
as per the Architectural drawings, as per item
description, as specified, as per the approved
shop drawings and as directed by the Engineer-
in-Charge. However, for the purpose of
payment, only the actual area on the external
face of the curtain wall with Aluminum
Composite Panel Cladding (including width of
groove) shall be measured in sqm. up to two
decimal places.
Metre
3697.00
Note : The following performance test are to be
conducted on ACP system if area of ACP system
exceeds 4500 Sqm from the certified
laboratories accreditated by NABL (National
Accreditation Board for Testing and Calibration
Laboratories), Department of Science
&Technologies, India. The NIT approving
authority will decide the necessity of testing on
the basis of cost of the work, cost of the test
and importance of the work.
Performance Testing of ACP system Tests to be
conducted in the NABL certified laboratories
(1). Performance Laboratory Test for Air
Leakage Test (-50pa to -300pa) & (+50pa to
+300pa) as per ASTM E-283-04 testing method
for a range of testing limit 1 to 200 mVhr
(2). Static Water Penetration Test. (50pato
1500pa) as per ASTME-331-09 testing method
for a range upto 2000 ml.
(3). Dynamic Water Penetration (50pato
1500pa) as per AAMA501.01-05 testing method
for a range upto 2000 ml
(4). Structural Performance Deflection and
deformation by static air pressure test ( 1.5
times design wind pressure without any failure)
as per ASTME-330-10 testing method for a
range upto50 mm
(5). Seismic Movement Test (Upto 30 mm) as
per AAMA 501.4-09 testing method for
Qualitative test.
Tests to be conducted on site.
(6). Onsite Test for Water Leakage for a
pressure range 50 kpa to240 kpa (35 psi) upto
2000 ml.
1135 Design supply & installation of suspended
Spider Glozing system designed to withstand
the wind pressure as pr IS 875 (Part-III). The
Suspended System held with Spider Fittings of
SS-316 Grade Steel of approved manufacturer
with glass panel having 12 mm thick clear
toughened glass held together with SS- 316
Grade Stainless steel Spider & bolt assembly
with laminated glass fins 21 mm thick. The
Glass fins and glass panel assembly shall be
connected to Slab/beams by means of SS- 316
Grade stainless steel brackets & Anchor bolts
and at the bottom using SS channel of
50x25x2mm using fastener & anchor bolts, non
staining weather sealants of approved make,
Teflon/ nylon bushes and separators to prevent
bi-metallic contacts, all complete to perform as
per specification and approved drawings. The
complete system to be designed to
accommodate thermal expansion & seismic
movements etc. The joints between glass
panels (6 to 8 mm) and gaps at the perimeter &
in U channel of the assembly to be filledwith
non staining weather sealant, so as to make the
entire system fully water proof & dust proof.
The rate shall include all design, Engineering
and shop drawing including approval from
structural designer, labour, T&P, scaffolding ,
other incidental charges including wastage,
enabling temporary services all fitting fixers nut
bolts, washer, Buffer plates, fastener, anchors,
SS channel laminated glass etc. all complete.
For the purpose of payment, actual elevation
area of Glazing including thickness of joints and
the portion of Glass panel inside the SS channel
shall be measured.
Metre
3430.00
21406.00
This DSR-13 has been generated from dbSoft-2013
Total of LMR Items (CI and reduction not applicable) : 0.00
Total of the Sub-Head - Structural Glazing And Acp Panel :
Grand Total : 62,11,305.00
Total of Schedule Items (CI applicable) : 62,11,305.00
DSR-13
Code
2.1.1
2.2.1
2.3.1
2.4
2.5
2.6.1
CPWD DSR-2013 IN MS EXCEL (READY TO USE, WITH FORMAULAS)
Sub-Head : Earth Work
DSR-13
Code
2.7.1
2.7.2
2.7.3
2.8.1
2.9.1
2.9.2
2.9.3
DSR-13
Code
2.10.1.1
2.10.1.2
2.10.1.3
2.11
2.12
2.13.1.1
2.13.1.2
2.13.1.3
2.13.2.1
2.13.2.2
2.13.2.3
2.13.3.1
DSR-13
Code
2.13.3.2
2.13.3.3
2.14
2.15
2.16.1
2.16.2
2.16.3
2.17.1
2.17.2
2.17.3
2.18.1
2.18.2
2.18.3
DSR-13
Code
2.19
2.20.1
2.20.2
2.20.3
2.21.1
2.21.2
2.21.3
2.22.1
2.22.2
2.22.3
2.23
2.24.1
2.24.2
DSR-13
Code
2.25
2.26.1
2.26.2
2.27
2.27
(MOD)(Mod
)
2.28.1
2.29.1
2.30.1
2.30.2
2.30.3
2.30.4
2.31
DSR-13
Code
2.32
2.33.1
2.33.2
2.33.3
2.33.4
2.34.1
2.35.1.1
2.35.2.1
2.35.3.1
DSR-13
Code
2.35.4.1
2.35.5
2.36
2.37
2.38
4.1.1
4.1.2
4.1.3
4.1.4
Sub-Head : Concrete Work
DSR-13
Code
4.1.5
4.1.6
4.1.7
4.1.8
4.1.9
4.1.10
4.1.11
4.1.12
4.1.13
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
4.2.7
4.2.8
4.3.1
DSR-13
Code
4.3.2
4.3.3
4.4.1
4.4.2
4.5.1
4.5.2
4.5.3
4.6.1
4.7.1
4.7.2
DSR-13
Code
4.8.1
4.8.2
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
DSR-13
Code
4.17
4.18
4.19.1.1
4.19.1.2
4.19.2.1
4.19.2.2
DSR-13
Code
4.20.1.1
4.20.1.2
4.20.2.1
4.20.2.2
5.1.1
5.1.2
5.1.3
Sub-Head : Reinforced Cement Concrete
DSR-13
Code
5.2.1
5.2.2
5.2.3
5.3
5.4
5.5
5.6
5.7
DSR-13
Code
5.8
5.9.1
5.9.2
5.9.3
5.9.4
5.9.5
5.9.6
5.9.7
5.9.8
5.9.9
5.9.10
5.9.11
5.9.12
5.9.13
5.9.14
5.9.15
5.9.16.1
5.9.16.2
5.9.17
DSR-13
Code
5.9.18
5.9.19
5.9.20
5.9.21
5.10.1
5.10.2
5.10.3
5.10.4
5.11.1
5.12
5.13
DSR-13
Code
5.14
5.15
5.16
5.17
5.18.1
5.18.2
DSR-13
Code
5.18.3
5.19
5.20
5.21
5.22.1
5.22.2
5.22.3
5.22.4
5.22.5
5.22.6
5.22A.1
5.22A.2
5.22A.3
5.22A.4
5.22A.5
5.22A.6
DSR-13
Code
5.23
5.24
5.25
5.26
5.27
5.28
5.29.1.1
5.29.1.2
5.29.2.1
5.29.2.2
5.30
DSR-13
Code
5.31
5.32
5.33.1
DSR-13
Code
5.33.2
5.34.1
5.34.2
5.34.3
5.35
5.36
DSR-13
Code
5.37.1
5.37.2
5.38
DSR-13
Code
5.40.1
5.40.2
5.41.1
5.41.2
DSR-13
Code
5.42.1
5.42.2
5.42.3
5.42.4
5.42.5
5.43.1
5.43.2
DSR-13
Code
5.44.1
5.44.2
5.44.3
5.45.1
5.45.2
DSR-13
Code
5.45.3
5.46.1
5.46.2
5.46.3
5.47.1
5.47.2
DSR-13
Code
5.47.3
5.48.1
5.48.2
5.48.3
DSR-13
Code
5.49
6.1.1
6.1.2
6.2.1
6.2.2
6.3.1
6.3.2
Sub-Head : Brick Work
DSR-13
Code
6.4.1
6.4.2
6.5
6.6
6.7
6.8
6.9
6.10
DSR-13
Code
6.11
6.12.1
6.12.2
6.13.1
6.13.2
6.14
6.15
6.16.1
6.16.2
6.17
6.18
DSR-13
Code
6.20
6.21
6.22
6.23
6.24
6.25
6.26.1
6.26.2
DSR-13
Code
6.27.1
6.27.2
6.28.1
6.28.2
6.29.1
6.29.2
6.30.1
6.30.2
DSR-13
Code
6.31.1
6.31.2
6.32.1
6.32.2
6.34.1
6.34.2
6.35.1
6.35.2
6.36.1
6.37
6.38
DSR-13
Code
6.40
6.41
6.44
6.45.1
6.45.2
7.1.1
7.2.1
7.4.1
7.4.2
Sub-Head : Stone Work
DSR-13
Code
7.5
7.6.1
7.7.1
7.8.1
7.8.2
7.10.1
7.10.2
7.11
7.12.1.1
7.12.1.2
7.12.2.1
7.12.2.2
DSR-13
Code
7.13.1.1
7.13.1.2
7.13.2.1
7.13.2.2
7.14.1.1
7.14.1.2
7.14.2.1
7.14.2.2
7.15.1.1
7.15.1.2
7.15.2.1
7.15.2.2
DSR-13
Code
7.16
7.17.1
7.18
7.19
7.20.1
7.20.2
7.21.1
7.21.2
7.22
7.23.1.1
7.23.1.2
DSR-13
Code
7.23.1.3
7.23.1.4
7.23.1.5
7.23.2.1
7.23.2.2
7.23.2.3
7.23.2.4
7.23.2.5
7.23.3.1
7.23.3.2
7.23.3.3
7.23.3.4
7.23.3.5
7.23.4.1
7.23.4.2
7.23.4.3
7.23.4.4
7.23.4.5
7.24
7.25
DSR-13
Code
7.26
7.27
7.28.1.1
7.28.2.1
7.29.1
7.29.2
7.30
7.31
DSR-13
Code
7.32.1
7.32.2
7.33.1
7.33.2
7.34
7.35
DSR-13
Code
7.36
7.37.1.1
7.38.1.1
7.38.1.2
7.39
DSR-13
Code
7.40.1
7.40.2
7.41
7.42
DSR-13
Code
8.1.1.1
8.1.1.2
8.2.1.1
8.2.1.2
8.2.2.1
8.2.2.2
8.3.1
Sub-Head : Marble & Granite Work
DSR-13
Code
8.3.2
8.4
8.5
8.6
8.7.1
8.7.2
8.8.1.1
8.8.1.2
8.8.1.3
8.9.1.1
8.9.1.2
DSR-13
Code
8.10.1
8.10.2
8.11
8.12
Sub-Head : Wood and PVC Work
DSR-13
Code
9.1.1
9.1.2
9.1.3
9.2
9.3.1
9.3.2
9.4.1
9.4.2
9.4.3
9.5.1.1
9.5.1.2
DSR-13
Code
9.5.2.1
9.5.2.2
9.5.3.1
9.5.3.2
9.6.1
9.6.2
9.6.3
DSR-13
Code
9.7.1
9.7.2
9.7.3.1
9.7.3.2
9.7.4.1
9.7.5.1
9.7.5.2
9.7.5 .3
9.7.5.4
9.7.6.1
9.7.7.1
9.7.7.2
9.7.8
DSR-13
Code
9.9.1.1
9.9.1.2
9.9.2.1
9.9.2.2
9.9.3.1
9.9.3.2
9.10.1
9.11.1
9.12
9.13
9.14
DSR-13
Code
9.15.1.1
9.15.2.1
9.16.1.1
9.16.1.2
9.16.2.1
9.16.2.2
9.17.1
9.17.2
9.18.1
9.18.2
DSR-13
Code
9.20.1
9.20.2
9.20.3
9.21.1
9.21.2
9.21.3
9.22.1
9.23
9.24.1
DSR-13
Code
9.24.2
9.25.1
9.26
9.27.1.1.1
9.27.1.1.2
9.27.1.1.3
9.27.1.2.1
9.27.1.2.2
9.27.1.2.3
9.27.2.1.1
9.27.2.1.2
9.27.2.1.3
9.27.2.2.1
DSR-13
Code
9.27.2.2.2
9.27.2.2.3
9.31.1
9.31.2
9.32
9.33.1
9.33.2
9.33.3
9.33.4
9.34.1
9.34.2
9.34.3
9.34.4
DSR-13
Code
9.35.1
9.35.2
9.35.3
9.36.1
9.37.1
9.38
9.39.1
9.39.2
DSR-13
Code
9.40.1.1
9.40.1.2
9.40.2.1
9.40.2.2
9.41.1
9.42
9.43
9.44.1
DSR-13
Code
9.44.2
9.45
9.46.1
9.46.2
9.46.3
9.47.1
9.47.2
9.48.1
9.48.2
9.49
9.50
DSR-13
Code
9.51.1
9.51.2
9.52
9.53
9.54.1
9.54.2
9.55.1
9.55.2
9.55.3
9.55.4
9.56.1
9.56.2
9.56.3
9.56.4
9.57.1
9.57.2
9.57.3
9.57.4
DSR-13
Code
9.58.1
9.58.2
9.58.3
9.58.4
9.59.1
9.59.2
9.59.3
9.60.1
9.60.2
9.60.3
9.61.1
9.61.2
9.61.3
9.62.1
9.62.2
9.63.1
9.63.2
9.63.3
9.63.4
9.64
9.65.1
9.65.2
9.66.1
DSR-13
Code
9.66.2
9.66.3
9.67.1
9.67.2
9.67.3
9.68.1
9.68.2
9.68.3
9.69
9.70.1
9.70.2
9.70.3
9.70.4
9.71.1
9.71.2
9.71.3
9.72.1
9.72.2
9.72.3
9.72.4
9.72.5
9.72.6
9.72.7
9.73.1
9.73.2
9.73.3
9.73.4
9.74.1
9.74.2
9.74.3
DSR-13
Code
9.74.4
9.75.1
9.75.2
9.76
9.77
9.78
9.79.1
9.79.2
9.79.3
9.79.4
9.80
9.81.1
9.81.2
9.81.3
9.82
9.83
9.84
DSR-13
Code
9.85
9.86.1
9.86.2
9.86.3
9.87.1
9.87.2
9.87.3
9.88
9.89
9.90.1
9.90.2
9.90.3
9.90.4
9.91
9.92.1
9.92.2
9.92.3
9.93
9.94.1
9.94.2
9.94.3
DSR-13
Code
9.95.1
9.95.2
9.95.3
9.95.4
9.95.5
9.95.6
9.95.7
9.95.8
9.96.1
9.96.2
9.97.1
9.97.2
9.97.3
9.97.4
9.97.5
9.98
9.99
9.100.1
9.100.2
9.100.3
DSR-13
Code
9.101.1
9.101.2
9.102
9.103
9.104
DSR-13
Code
9.105.1
9.105.2
9.105.3
9.105.4
9.106.1
9.106.2
9.107.1
9.107.2
DSR-13
Code
9.108.1
9.108.2
9.109
9.110
9.111.1
9.112
9.113
9.114.1
9.114.2
9.115
DSR-13
Code
9.116
9.117.1
9.117.2
DSR-13
Code
9.118.2
9.118.3
9.119
DSR-13
Code
9.120.1
9.120.2
DSR-13
Code
9.121
9.122.1
9.122.2
DSR-13
Code
9.123
9.124.1
9.124.2
9.125
DSR-13
Code
9.126.1
9.126.2
9.127.1
9.127.2
9.128
DSR-13
Code
9.129
9.130.1
9.130.2
9.131.1
9.132
DSR-13
Code
9.133.1.1
9.133.2.1
9.133.3.1
DSR-13
Code
9.134.1.1.1
9.134.1.1.2
9.134.1.1.3
9.134.1.2.1
9.134.1.2.2
9.134.1.2.3
9.134.2.1.1
9.134.2.1.2
9.134.2.1.3
9.134.2.2.1
9.134.2.2.2
9.134.2.2.3
9.135.1
9.135.2
DSR-13
Code
9.136
9.137
9.138.1
9.139
DSR-13
Code
9.140.1
9.141
DSR-13
Code
9.142.1
9.142.2
9.143
DSR-13
Code
9.144
9.145
DSR-13
Code
9.146
DSR-13
Code
9.147.1.1
9.147.1.2
9.147.1.3
9.147.1.4
9.147.1.5
9.147.2.1
9.147.2.2
9.147.2.3
9.147.3.1
9.147.3.2
9.147.3.3
9.147.3.4
9.147.4.1
9.147.4.2
9.147.4.3
9.147.4.4
DSR-13
Code
9.148.1
9.148.2
9.148.3
9.148.4
9.148.5
9.149
9.150
9.151
9.152
9.153
9.154
DSR-13
Code
9.155
9.156.1
9.156.2
9.157.1
9.157.2
DSR-13
Code
9.158.1
9.158.2
9.158.3
9.159
9.160.1
9.160.2
10.1
10.2
Sub-Head : Steel Work
DSR-13
Code
10.3
10.4
10.5.1
10.5.2
10.6.1
10.6.2
10.6.3
10.7
DSR-13
Code
10.8.1
10.8.2
10.9
10.10.1
10.10.2
10.11.1
10.11.2
DSR-13
Code
10.12
10.13.1
10.13.2
10.14.1.1
10.14.1.2
10.14.2.1
10.14.2.2
DSR-13
Code
10.14.3.1
10.14.3.2
10.15.1
10.15.2
10.16.1
10.16.2
10.16.3
10.17
10.18
DSR-13
Code
10.19
10.20
10.21
10.22
10.25.1
10.25.2
10.26.1
10.26.2
10.26.3
10.27.1
10.27.2
10.27.3
10.27.4
10.27.5
DSR-13
Code
10.28
10.29.1
10.29.2
10.30.1
10.30.2
11.1.1
11.1.2
11.2
Sub-Head : Flooring
DSR-13
Code
11.3.1
11.4
11.5
11.6.1
11.7
11.8
DSR-13
Code
11.9.1
11.9.2
11.9.3
11.9.4
11.9.5
11.9.6
11.10.1
11.10.2
11.10.3
11.10.4
11.10.5
11.10.6
DSR-13
Code
11.11.1
11.11.2
11.11.3
11.11.4
11.11.5
11.11.6
11.12.1.1
11.12.1.2
11.12.1.3
11.12.1.4
11.12.1.5
11.12.1.6
DSR-13
Code
11.13.1
11.14
11.15.1
11.16.1
11.16.2
11.16.3
11.16.4
11.17
11.18.1
DSR-13
Code
11.18.2
11.18.3
11.18.4
11.19.1
11.19.2
11.19.3
11.19.4
11.20.1
11.20.2
11.20.3
11.20.4
11.21.1.1
11.21.2.1
DSR-13
Code
11.22.1.1
11.23.1
11.23.2
11.23.3
11.23.4
11.23.5
11.23.6
11.24
11.25
11.26.1
11.27
DSR-13
Code
11.28.1
11.28.2
11.29.1
11.29.2
11.30.1
11.30.2
11.31
11.32
11.33.1
11.33.2
DSR-13
Code
11.34
11.35
11.36
11.37
11.38
DSR-13
Code
11.39
11.40
11.41.1
11.41.2
11.41.3
11.41.4
11.42
11.43
DSR-13
Code
11.44
11.45
11.46.1
11.46.2
11.46.3
11.46.4
DSR-13
Code
11.47.1
11.47.2
11.47.3
11.47.4
11.48.1
11.48.2
11.48.3
11.48.4
11.49.1
11.49.2
DSR-13
Code
11.49.3
11.49.4
11.50
11.51
11.52
DSR-13
Code
11.53
DSR-13
Code
DSR-13
Code
11.54.1
11.54.2
12.1.1
12.1.2
12.1.3
12.2.1
12.2.2
12.2.3
Sub-Head : Roofing
DSR-13
Code
12.3.1
12.3.2
12.3.3
12.4.1
12.4.2
12.5.1
12.6.1
12.7.1
12.7.2
DSR-13
Code
12.8
12.9
12.10
12.11
12.12.1
12.12.2
12.12.3
12.12.4
12.13.1
12.13.2
12.13.3
12.13.4
DSR-13
Code
12.13.5
12.13.6
12.13.7
12.13.8
12.14
12.15.1
12.16.1
12.17.1
12.18
DSR-13
Code
12.19.1
12.20
12.21.1
12.22
12.23.1.1
12.23.2.1
DSR-13
Code
12.24.1.1
12.24.2.1
12.24.3.1
12.25.1
12.26.1
12.27.1
12.27.2.1
12.27.3.1
12.27.4.1
12.27.5.1
12.27.5.2
DSR-13
Code
12.28
12.29
12.30
12.31.1
12.31.2
12.32
12.33
DSR-13
Code
12.34
12.35
12.36.1
12.36.2
12.37.1
12.38.1
12.38.2
12.39.1
12.39.2
12.40.1.1
DSR-13
Code
12.41.1
12.41.2
12.42.1.1
12.42.1.2
12.42.2.1
12.42.2.2
12.42.3.1
12.42.3.2
12.42.4.1
12.42.4.2
12.42.5.1
12.42.5.2
12.42.6.1
12.42.6.2
12.43.1
12.43.2
12.44
DSR-13
Code
12.45.1
DSR-13
Code
12.45.2
12.45.3
12.45.4
12.46
12.47.1
12.47.2
12.48
12.49
DSR-13
Code
12.50
12.51.1
12.51.2
12.51.3
12.51.4
12.51.5
12.51.6
DSR-13
Code
12.52.1
DSR-13
Code
12.52.2
12.52.3
12.52.4
DSR-13
Code
DSR-13
Code
12.53
DSR-13
Code
12.54.1
12.54.2
12.55
12.56
DSR-13
Code
12.57
DSR-13
Code
12.58.1
DSR-13
Code
12.59.1
12.60
12.61
DSR-13
Code
12.62
12.63
13.1.1
13.1.2
13.2.1
13.2.2
13.3.1
13.3.2
13.4.1
13.4.2
Sub-Head : Finishing
DSR-13
Code
13.5.1
13.5.2
13.6.1
13.6.2
13.7.1
13.7.2
13.8.1
13.8.2
13.9.1
13.9.2
13.10
13.11
13.12
13.13
13.14
13.15
DSR-13
Code
13.16.1
13.17
13.18
13.19.1
13.20
13.21
13.22
13.23.1
13.23.2
13.24.1
DSR-13
Code
13.24.2
13.25.1
13.25.2
13.25.3
13.26
13.27
13.28.1
13.28.2
13.28.3
13.28.4
13.29.1
13.29.2
13.29.3
13.29.4
13.30
13.31.1
13.31.2
DSR-13
Code
13.32.1
13.33.1
13.33.2
13.34
13.35.1
13.36
13.37.1
13.38
13.39.1
13.39.2
13.40
13.41.1
13.42.1
DSR-13
Code
13.43.1
13.44.1
13.45.1
13.46.1
13.47.1
13.48.1
13.48.2
13.48.3
13.50.1
13.50.2
DSR-13
Code
13.50.3
13.50.4
13.51.1
13.51.2
13.52.1
13.52.2
13.53.1
13.54.1
13.54.2
13.55.1
DSR-13
Code
13.55.2
13.56.1
13.56.2
13.57.1
13.58
13.59
13.60.1
13.61.1
13.62.1
13.63.1
DSR-13
Code
13.64.1
13.65.1
13.66.1
13.67.1
13.67.2
13.68.1
13.69.1
13.70
13.71
13.72
DSR-13
Code
13.73.1
13.73.2
13.74
13.75
13.76
13.77
13.78
DSR-13
Code
13.79
13.80
13.81.1
13.81.2
13.82.1
13.82.2
13.83.1
13.83.2
DSR-13
Code
13.84.1
13.84.2
13.85.1
13.85.2
13.85.3
14.1.1
14.1.2
14.2.1
14.2.2
Sub-Head : Repairs to Buildings
DSR-13
Code
14.2.3
14.3
14.4.1
14.5.1
14.5.2
14.6.1
14.6.2
14.7.1
14.7.2
14.8.1
14.8.2
14.9
14.10
14.11
DSR-13
Code
14.12
14.13
14.14.1
14.15.1
14.16.1.1
14.16.1.2
DSR-13
Code
14.16.2.1
14.16.2.2
14.17
14.18.1
14.18.2
14.19
14.20
14.21
14.22.1
14.22.2
14.23
14.24
14.25
DSR-13
Code
14.26.1.1
14.26.1.2
14.26.2.1
14.26.2.2
14.27.1
14.28.1
14.28.2
14.29
14.30.1
14.30.2
14.31.1
14.31.2
14.31.3
DSR-13
Code
14.32.1
14.32.2
14.32.3
14.33.1
14.33.2
14.33.3
14.34
14.35.1
14.35.2
14.35.3
14.35.4
14.35.5
14.36
14.37
14.38
14.39
14.40.1
14.40.2
14.40.3
14.40.4
14.40.5
14.41
14.42.1
14.42.2
DSR-13
Code
14.43
14.44
14.45.1
14.46
14.47.1
14.48.1
14.49.1
14.49.2
14.49.3
DSR-13
Code
14.50.1
14.50.2
14.50.3
14.51.1
14.51.2
14.51.3
14.52.1
14.53.1
14.54.1
14.55.1
14.56.1
DSR-13
Code
14.57.1
14.58.1
14.59.1
14.60
14.61
14.62.1
14.62.2
14.63.1
14.64.1
14.64.2
14.65.1
14.65.2
14.66.1
14.66.2
DSR-13
Code
14.67.1
14.67.2
14.69.1
14.69.2
14.70
14.71
14.72
14.73
14.74
Sub-Head : Dismantling and Demolishing
DSR-13
Code
15.1
15.2.1
15.2.2
15.3
15.4
15.5
15.6
15.7.1
15.7.2
15.7.3
15.7.4
15.8.1
15.8.2
15.8.3
DSR-13
Code
15.9.1
15.9.2
15.10.1
15.10.2
15.11.1
15.11.2
15.12.1
15.12.2
15.13.1
15.13.2
15.14.1
15.14.2
DSR-13
Code
15.15.1
15.15.2
15.16.1
15.16.2
15.17.1
15.17.2
15.18
15.19
15.20
15.21
15.22
15.23.1
15.23.2
DSR-13
Code
15.24
15.25
15.26
15.27
15.28.1
15.28.2
15.29
15.30
15.31
15.32
15.33
DSR-13
Code
15.34.1
15.34.2
15.35
15.36
15.37
15.38
15.39.1
15.39.2
15.39.3
15.40.1
15.40.2
15.41
15.42.1
15.42.2
15.42.3
DSR-13
Code
15.43.1
15.43.2
15.44.1
15.44.2
15.45.1
15.45.2
15.45.3
15.46.1
15.46.2
DSR-13
Code
15.47.1
15.47.2
15.48
15.49
15.50
15.51
15.52
15.53.1
15.53.2
DSR-13
Code
15.54
15.55.1
15.55.2
15.55.3
15.56
15.57
15.58
15.59
15.60
Sub-Head : Road Work
DSR-13
Code
16.1
16.2
16.3.1
16.3.2
16.3.3
16.3.4
16.3.5
16.3.6
16.3.7
16.3.8
16.3.9
16.3.10
16.4
DSR-13
Code
16.5.1
16.5.2
16.6.1
16.7.1
16.8.1
16.9
16.10
16.11
16.12.1
16.13.1
16.13.2
DSR-13
Code
16.14
16.15.1
16.15.2
16.16
16.17.1
DSR-13
Code
16.18.1
16.19
16.20
16.21
16.22
DSR-13
Code
16.23
16.24.1
16.24.2
16.24.3
16.25
16.26
16.27
DSR-13
Code
16.28.1
16.29.1
16.30.1
16.30.2
16.31.1.1
16.31.1.2
16.31.2.1
16.31.2.2
DSR-13
Code
16.32.1
16.32.2
16.32.3
16.33.1
16.33.2
16.33.3
16.34
16.35
DSR-13
Code
16.36.1
16.36.2
16.37.1
16.37.2
DSR-13
Code
16.38.1
16.38.2
16.38.3
16.39.1
16.39.2
16.39.3
16.40
DSR-13
Code
16.41
16.42
16.43.1
16.43.2
16.43A
16.43B
DSR-13
Code
16.44
16.45
16.46.1
16.47.1
16.47.2
16.48.1
16.48.2
DSR-13
Code
16.49
16.50
16.51.1
DSR-13
Code
16.52
16.53
16.54.1
DSR-13
Code
16.54.2
16.55.1
16.55.2
16.56.1
DSR-13
Code
16.56.2
16.57.1
16.57.2
16.57.3
16.57.4
16.57.5
DSR-13
Code
16.57.6
16.57.7
16.57.8
DSR-13
Code
16.59.1
16.59.2
16.60.1
DSR-13
Code
16.61
16.62
16.63
DSR-13
Code
16.64
16.65
16.66.1
16.67
16.68
DSR-13
Code
16.69
16.70.1
16.70.2
16.71
16.72
16.73
16.74.1
16.74.2
16.74.3
DSR-13
Code
16.75
16.76
16.77
16.78.1
16.78.2
16.78.3
DSR-13
Code
16.79
16.80
DSR-13
Code
16.81
16.82
16.83
16.84
16.85
DSR-13
Code
16.86.1
16.87.1
16.88
DSR-13
Code
16.89
16.90
16.91
DSR-13
Code
16.92
17.1.1
17.1.2
17.2.1
17.2.2
Sub-Head : Sanitary Installations
DSR-13
Code
17.3.1
17.3.2
17.4.1
17.4.2
17.4.3
17.4.4
17.5.1
17.5.2
17.5.3
17.5.4
DSR-13
Code
17.6.1
17.6.2
17.6.3
17.6.4
17.7.1
17.7.2
17.7.3
17.7.4
17.7.5
17.7.6
17.7.7
17.7.8
DSR-13
Code
17.7.9
17.7.10
17.7.11
17.8
17.9.1
17.10.1.1
17.10.1.2
17.10.1.3
17.10.1.4
17.10.2.1
17.10.2.2
17.10.2.3
17.11.1
17.11.2
17.12.1
DSR-13
Code
17.13.1
17.13.2
17.14.1
17.15
17.16
17.17.1
17.17.2
17.18.1
17.18.2
17.19.1
17.19.2
17.20.1
17.20.2
17.20.3
17.22
17.23
17.24
17.25.1
17.25.2
DSR-13
Code
17.25.3
17.25.4
17.25.5
17.25.6
17.26.1
17.27.1
17.27.2
17.28.1.1
17.28.1.2
17.28.2.1
17.28.2.2
17.29
17.30
17.31
17.32.1
17.32.2
17.32.3
17.32.4
17.33
DSR-13
Code
17.34.1
17.34.2
17.35.1.1
17.35.1.2
17.35.2.1
17.35.2.2
17.36.1
17.36.2
17.37.1
17.37.2
17.38.1.1
17.38.1.2
17.38.2.1
17.38.2.2
17.39.1.1
17.39.1.2
17.39.2.1
17.39.2.2
DSR-13
Code
17.40.1.1
17.40.1.2
17.40.2.1
17.40.2.2
17.41.1.1
17.41.1.2
17.41.2.1
17.41.2.2
17.42.1.1
17.42.1.2
17.42.2.1
17.42.2.2
17.43.1.1
17.43.1.2
17.43.2.1
17.43.2.2
17.44.1.1
17.44.1.2
17.44.2.1
17.44.2.2
17.45.1.1
17.45.1.2
DSR-13
Code
17.46.1.1
17.46.1.2
17.47.1.1
17.47.1.2
17.48.1.1
17.48.1.2
17.49.1.1
17.49.1.2
17.49.2.1
17.49.2.2
17.50.1.1
17.50.1.2
17.50.2.1
17.50.2.2
17.51.1.1
17.51.1.2
17.52.1.1
17.52.1.2
17.53.1.1
17.53.1.2
17.53.2.1
17.53.2.2
17.53.3.1
17.53.3.2
DSR-13
Code
17.54.1.1
17.54.2.1
17.54.2.2
17.55.1.1
17.55.1.2
17.55.2.1
17.55.2.2
17.56.1.1
17.56.1.2
17.56.2.1
17.56.2.2
17.57.1.1
17.57.1.2
17.57.2.1
17.57.2.2
17.58.1
17.58.2
17.58.3
17.59.1
17.59.2
17.59.3
17.60.1.1
17.60.1.2
17.60.2.1
17.60.2.2
DSR-13
Code
17.61.1
17.61.2
17.61.3
17.62
17.63
17.64
17.65.1
17.65.2
DSR-13
Code
17.66.1
17.66.2
17.67
17.68.1
17.69.1
17.69.2
17.70.1
DSR-13
Code
17.70.2
17.71
17.72
17.73.1
17.73.2
17.74
17.75
17.76.1
DSR-13
Code
17.77.1
17.77.2
17.77.3
17.78
17.79
17.80
Sub-Head : Water Supply
DSR-13
Code
18.1.1
18.1.2
18.1.3
18.1.4
18.1.5
18.1.6
18.2.1
DSR-13
Code
18.2.2
18.2.3
18.2.4
18.3.1
18.3.2
18.3.3
18.3.4
18.3.5
18.3.6
DSR-13
Code
18.4.1
18.4.2
18.4.3
18.4.4
18.4.5
18.4.6
18.5.1
18.5.2
18.5.3
18.5.4
DSR-13
Code
18.6.1
18.6.2
18.6.3
18.6.4
18.6.5
18.6.6
18.6.7
18.6.8
18.6.9
18.6.10
18.6.11
DSR-13
Code
18.7.1
18.7.2
18.7.3
18.7.4
18.7.5
18.7.6
18.8.1
18.8.2
18.8.3
18.8.4
DSR-13
Code
18.9.1
18.9.2
18.9.3
18.9.4
18.9.5
18.9.6
18.9.7
18.9.8
18.9.9
18.9.10
18.10.1
18.10.2
18.10.3
18.10.4
18.10.5
18.10.6
DSR-13
Code
18.11.1
18.11.2
18.12.1
18.12.2
18.12.3
18.12.4
18.12.5
18.12.6
18.12.7
18.12.8
18.13.1
18.13.2
18.14
18.15.1
DSR-13
Code
18.15.2
18.16.1
18.16.2
18.17.1
18.17.2
18.17.3
18.17.4
18.17.5
18.17.6
18.18.1
18.18.2
18.18.3
18.19.1.1
18.19.1.2
18.19.2.1
18.19.2.2
18.19.3.1
18.19.3.2
18.19.4.1
18.19.4.2
18.19.5.1
18.19.5.2
18.19.6.1
18.19.6.2
18.20.1
18.20.2
18.20.3
18.21.1.1
18.21.1.2
18.21.2.1
DSR-13
Code
18.21.2.2
18.22.1
18.22.2
18.23
18.24
18.25.1
18.25.2
18.26.1
18.26.2
18.27.1
18.27.2
18.27.3
18.27.4
18.27.5
18.27.6
18.27.7
18.27.8
18.27.9
DSR-13
Code
18.27.10
18.27.11
18.28.1
18.28.2
18.28.3
18.28.4
18.28.5
18.28.6
18.28.7
18.28.8
18.28.9
18.28.10
18.28.11
18.29
18.30.1
18.30.2
18.30.3
18.30.4
18.30.5
18.30.6
18.30.7
18.30.8
18.30.9
18.30.10
18.30.11
18.30.12
18.31.1.1
18.31.1.2
18.31.2.1
18.31.2.2
18.31.3.1
18.31.3.2
18.31.4.1
18.31.4.2
DSR-13
Code
18.31.5.1
18.31.5.2
18.31.6.1
18.31.6.2
18.32.1
18.33.1
DSR-13
Code
18.34.1
18.35.1
DSR-13
Code
18.36.1
18.37.1
18.38.1
18.38.2
18.38.3
18.38.4
DSR-13
Code
18.38.5
18.38.6
18.39.1
18.39.2
18.39.3
18.39.4
18.39.5
18.39.6
18.40.1
18.40.2
18.40.3
18.40.4
18.40.5
18.40.6
18.40.7
18.40.8
DSR-13
Code
18.41.1
18.41.2
18.41.3
18.41.4
18.41.5
18.41.6
18.41.7
18.41.8
18.41.9
18.41.10
18.42.1
18.42.2
18.42.3
18.43
DSR-13
Code
18.44
18.45
18.46.1
18.46.2
18.46.3
18.46.4
18.46.5
18.46.6
18.46.7
18.46.8
18.47.1
18.47.2
18.47.3
18.47.4
18.47.5
18.47.6
18.47.7
18.47.8
18.48
18.49.1
18.50.1
18.51.1
DSR-13
Code
18.52.1
18.53.1
18.54.1
18.54.2
18.54.3
18.54.4
18.55.1
18.55.2
18.55.3
18.56.1
18.56.2
18.57.1
18.57.2
18.58.1.1
18.58.1.2
18.58.2.1
DSR-13
Code
18.59.1
18.59.2
18.59.3
18.60.1
18.60.2
18.60.3
18.60.4
18.61.1
18.61.2
18.61.3
18.61.4
18.62.1
18.62.2
18.62.3
18.62.4
18.62.5
18.63
18.64
18.65
DSR-13
Code
18.66.1
18.66.2
18.67.1
18.67.2
18.68.1
18.68.2
18.69.1
18.69.2
18.70.1
18.70.2
18.70.3
18.70.4
18.70.5
18.70.6
18.70.7
18.70.8
18.70.9
18.70.10
18.70.11
18.70.12
18.70.13
18.70.14
18.70.15
18.71.1
18.71.2
18.71.3
DSR-13
Code
18.71.4
18.71.5
18.71.6
18.71.7
18.71.8
18.71.9
18.71.10
18.72.1
18.72.2
18.72.3
18.72.4
18.72.5
18.72.6
18.72.7
18.72.8
18.72.9
18.72.10
DSR-13
Code
18.72.11
18.72.12
18.72.13
18.72.14
18.72.15
18.72.16
18.72.17
18.72.18
18.72.19
18.72.20
18.72.21
18.72.22
18.72.23
18.72.24
18.72.25
18.72.26
18.72.27
18.72.28
DSR-13
Code
18.72.29
18.73.1
18.73.2
18.73.3
18.73.4
18.73.5
18.73.6
18.73.7
18.73.8
18.73.9
18.73.10
18.73.11
18.74.1
18.74.2
18.75.1
18.75.2
18.75.3
DSR-13
Code
18.76.1
18.77
18.78
18.79
18.80.1
18.80.2
18.80.3
18.80.4
18.80.5
18.80.6
18.80.7
18.80.8
18.80.9
18.80.10
18.80.11
18.80.12
18.81.1
18.81.2
18.81.3
18.81.4
18.81.5
DSR-13
Code
18.81.6
18.81.7
18.81.8
18.81.9
18.81.10
18.81.11
18.81.12
18.82.1
18.82.2
18.82.3
18.82.4
18.82.5
18.82.6
18.82.7
18.82.8
18.82.9
18.82.10
18.82.11
18.82.12
18.83.1
18.83.2
18.83.3
DSR-13
Code
18.83.4
18.83.5
18.83.6
18.83.7
18.83.8
18.83.9
18.83.10
18.83.11
18.83.12
18.84.1
18.85.1
18.85.2
18.85.3
18.85.4
18.85.5
18.85.6
DSR-13
Code
18.86.1
18.86.2
18.87.1
18.87.2
18.87.3
18.87.4
18.87.5
18.87.6
18.88.1
18.88.2
18.88.3
18.88.4
18.88.5
18.88.6
18.88.7
18.88.8
18.88.9
18.88.10
18.88.11
18.88.12
18.88.13
18.88.14
18.88.15
DSR-13
Code
18.89.1
18.89.2
18.89.3
18.89.4
18.89.5
18.89.6
18.90.1
18.90.2
18.90.3
18.90.4
18.90.5
18.90.6
18.91.1
18.91.2
18.91.3
18.91.4
18.91.5
18.91.6
18.92.1
18.92.2
18.92.3
18.92.4
18.92.5
18.92.6
DSR-13
Code
18.93.1
18.93.2
18.93.3
18.93.4
18.93.5
18.93.6
18.93.7
18.93.8
18.93.9
18.93.10
18.93.11
18.93.12
18.93.13
18.93.14
18.93.15
18.94.1
18.94.2
18.94.3
18.94.4
18.94.5
18.94.6
18.94.7
18.94.8
18.94.9
18.94.10
18.94.11
18.94.12
DSR-13
Code
18.94.13
18.94.14
18.94.15
18.94.16
18.94.17
18.94.18
18.94.19
18.94.20
18.94.21
18.95.1
18.95.2
18.95.3
18.95.4
18.95.5
18.95.6
18.95.7
18.95.8
18.95.9
18.95.10
18.95.11
18.95.12
18.95.13
DSR-13
Code
18.95.14
18.95.15
18.95.16
18.95.17
18.95.18
18.95.19
18.95.20
18.95.21
18.96.1
18.96.2
18.96.3
18.96.4
18.96.5
18.96.6
18.96.7
18.96.8
18.96.9
18.96.10
18.96.11
18.96.12
DSR-13
Code
18.97.1
18.97.2
18.97.3
18.97.4
18.97.5
18.97.6
18.97.7
18.97.8
18.97.9
18.97.10
18.97.11
18.98.1
18.98.2
18.98.3
18.98.4
18.98.5
18.98.6
18.98.7
DSR-13
Code
18.99.1
18.99.2
18.99.3
18.99.4
18.99.5
18.99.6
18.99.7
18.99.8
18.99.9
18.100.1
18.100.2
18.100.3
18.100.4
18.100.5
18.100.6
18.100.7
18.100.8
18.100.9
DSR-13
Code
18.100.10
18.101.1
18.101.2
18.101.3
18.101.4
18.101.5
18.101.6
18.102.1
18.102.2
18.102.3
19.1.1
19.1.2
19.1.3
19.1.4
19.1.5
Sub-Head : Drainage
DSR-13
Code
19.2.1
19.2.2
19.2.3
19.2.4
19.3.1
19.3.2
19.3.3
19.3.4
19.3.5
19.4.1.1
19.4.1.2
19.4.2.1
19.4.2.2
19.4.3.1
19.4.3.2
DSR-13
Code
19.5.1
19.5.2
19.5.3
19.5.4
19.5.5
19.5.6
19.5.7
19.5.8
19.6.1
19.6.2
19.6.3
19.6.4
19.6.5
19.6.6
DSR-13
Code
19.6.7
19.6.8
19.6.9
19.6.10
19.6.11
19.6.12
19.6.13
19.7.1.1
19.7.1.2
DSR-13
Code
19.7.2.1
19.7.2.2
19.7.3.1
19.7.3.2
19.8.1.1
19.8.1.2
19.8.2.1
19.8.2.2
DSR-13
Code
19.9.1.1
19.9.1.2
19.10.1
19.10.2
DSR-13
Code
19.11.1.1
19.11.1.2
19.12.1
19.12.2
19.13.1.1
19.13.1.2
19.14.1
19.14.2
DSR-13
Code
19.15.1
19.15.2
19.16
19.17.1
19.17.2
19.18.1
19.18.2
19.18.3
DSR-13
Code
19.19.1.1
19.19.1.2
19.19.1.3
19.19.2.1
19.19.2.2
19.19.3.1
19.19.4.1
19.20
19.21.1
19.21.2
19.21.3
19.22.1
DSR-13
Code
19.22.2
19.23.1
19.23.2
19.24.1
19.24.2
19.24.3
19.24.4
19.25.1
19.25.2
19.25.3
19.25.4
19.26.1
19.26.2
19.26.3
19.26.4
DSR-13
Code
19.27.1
19.28.1
19.29.1
19.30.1.1
19.30.2.1
DSR-13
Code
19.30.3.1
19.31.1.1
19.31.2.1
19.31.3.1
19.32.1
19.33
19.34.1
19.34.2
19.35.1
19.35.2
19.35.3
19.35.4
19.35.5
19.35.6
DSR-13
Code
19.36.1
19.36.2
19.36.3
19.36.4
19.36.5
19.36.6
20.1.1
20.1.2
20.1.3
20.1.4
20.1.5
20.1.6
20.1.7
20.1.8
Sub-Head : Pile Work
DSR-13
Code
20.2.1
20.2.2
20.2.3
20.2.4
20.2.5
20.2.6
20.2.7
20.2.8
20.2.9
DSR-13
Code
20.3.1
20.3.2
20.3.3
20.3.4
20.4.1
20.4.2
20.4.3
20.4.4
20.5.1
DSR-13
Code
20.5.2
20.5.3
20.5.4
20.5.5
20.5.6
20.6.1.1
20.6.1.2
20.6.2.1
20.6.2.2
20.6.3.1
20.6.3.2
20.7.1.1
20.7.1.2
20.7.2.1
20.8.1
20.8.2
DSR-13
Code
20.9
21.1.1.1
21.1.1.2
21.1.1.3
21.1.2.1
Sub-Head : Aluminium Work
DSR-13
Code
21.1.2.2
21.1.2.3
21.2.1
21.2.2
21.3.1
21.3.2
21.3.3
21.4.1
21.4.2
DSR-13
Code
21.5
21.6
21.7.1
21.7.2
DSR-13
Code
21.8.1
21.9.1
21.9.2
21.10
21.11.1
21.11.2
21.11.3
21.11.4
21.11.5
21.12.1
21.12.2
21.12.3
DSR-13
Code
21.13
21.14
21.15.1
21.15.2
21.15.3
21.16.1
21.16.2
21.16.3
21.17
DSR-13
Code
21.18
22.1.1
Sub-Head : Water Proofing
DSR-13
Code
22.2.1
22.3
22.4.1
22.4.2
DSR-13
Code
22.4.3
22.5
DSR-13
Code
22.7.1
22.8.1
DSR-13
Code
22.9
22.10
22.11
22.12
22.13.1
22.13.2
DSR-13
Code
22.14.1
22.14.2
22.14.3
22.15
DSR-13
Code
22.16
22.17
DSR-13
Code
22.18.1
DSR-13
Code
22.19.1
22.20.1
22.21
23.1
Sub-Head : Horticulture & Landscaping
DSR-13
Code
23.2
23.3
23.4.1
23.4.2
23.4.3
23.5
23.6
23.7
23.8
23.9
23.10.1
23.10.2
DSR-13
Code
23.11
23.12
23.13
23.14.1
DSR-13
Code
23.14.2
23.14.3
23.14.4
23.15.1
23.16
23.17.1
23.17.2
DSR-13
Code
23.18.1
23.18.2
23.19.1
23.20
23.21
23.22
23.23
23.24
23.25
DSR-13
Code
23.26
23.27
DSR-13
Code
23.28
23.29.1
23.29.2
23.30.1
Sub-Head : Rain Water Harvesting
DSR-13
Code
24.1.1.1
24.1.1.2
24.1.1.3
24.1.2.1
24.1.2.2
24.1.2.3
24.2.1.1
24.2.1.2
24.2.1.3
DSR-13
Code
24.2.2.1
24.2.2.2
24.2.2.3
24.3.1
24.3.2
24.3.3
24.4.1
24.4.2
24.4.3
24.5
DSR-13
Code
24.6
24.7
24.8
24.9
24.10.1
24.10.2
24.10.3
DSR-13
Code
24.11.1
24.11.2
24.11.3
24.12
24.13.1
24.13.2
24.13.3
DSR-13
Code
24.14.1
24.14.2
24.14.3
24.15.1
24.15.2
24.15.3
25.1
25.2
Sub-Head : Preservation of Heritage Buildings
DSR-13
Code
25.3
25.4
25.5
25.6
DSR-13
Code
25.7
25.8
26.1
Sub-Head : Structural Glazing and ACP Panel
DSR-13
Code
DSR-13
Code
26.2
DSR-13
Code
DSR-13
Code
26.3
DSR-13
Code
26.4
26.5
DSR-13
Code
26.6
DSR-13
Code
26.7
DSR-13
Code
DSR-13
Code
26.8
0.00
62,11,305.00
62,11,305.00

DSR (Delhi Schedule Rate) 2013

Uploaded by

Copyright:

Available Formats

DSR (Delhi Schedule Rate) 2013

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DSR (Delhi Schedule Rate) 2013

Uploaded by

Copyright:

Available Formats

I.No.

Description of Item Rate (Rs) Unit Amount(Rs)

You might also like