Scribd
Upload
45K views1 page

PEC AC Resistance Reactance Table

This document contains tables listing the resistance and reactance values for different conductor sizes of copper and aluminum wires installed in various types of conduit. The tables provide values for single phase and 3-phase wiring configurations at 600 volts, 60 Hz at 75°C operating temperature. Notes explain that the values are based on specific wire types and parameters and are only valid for the conditions given, but can be used to approximate voltage drop and impedance at 0.85 power factor.

Uploaded by

dabs_orangejuice
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45K views1 page

PEC AC Resistance Reactance Table

This document contains tables listing the resistance and reactance values for different conductor sizes of copper and aluminum wires installed in various types of conduit. The tables provide values for single phase and 3-phase wiring configurations at 600 volts, 60 Hz at 75°C operating temperature. Notes explain that the values are based on specific wire types and parameters and are only valid for the conditions given, but can be used to approximate voltage drop and impedance at 0.85 power factor.

Uploaded by

dabs_orangejuice
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

*

for All

Steel
Conduit
0.073
0.068
0.063
0.065
0.064
p. 060
0.057
0.057
0.055
0,054
0.052
0.051
0.052
0.051
0.050
0.049
0.048
0.048
0.048
0.048
0.046

Ohms to Neutral per 305 m


Alternating-Current
Alternating-Current
Effective
Z
at
0.85
PF
for
Effective
Z
at
0.85
PF
for
Resistance for Aluminum
Resistance for Uncoated
Uncoated
Copper
Wires
Aluminum
Wires
Wires
Copper Wires
PVC Aluminum Steel
PVC Aluminum Steel
PVC Aluminum Steel
PVC Aluminum Steel
Conduit Conduit Conduit Conduit Conduit Conduit Conduit Conduit Conduit Conduit Conduit Conduit
2.7
2.7
3.1
3.1
2.7
3.1
3.2
3.2
3.2
2.8
2.0
2.0
2.0
1.7
1,7
1.7
2.8
2.8
2.0
1,8
2.0
2.0
1.1
1.1
1.8
1.8
1.2
1.2
1.2
1.1
0.70
1.1
1.3
0.69
0.69
1,1
1.1
0.78
0.78
1.3
0.78
1.3
0.81
0.45
0,71
0.72
0.72
0.81
0.49
0.81
0.44
0.45
0.49
0.49
0.31
0.31
0.51
0.29
0.30
0.46
0.46
0.46
0.51
0,51
0.29
0.31
0.20
0.30
0.20
0.32
0.20
0.32
0.32
0.19
0,30
0.30
0.19
0.19
0.25
0.25
0.16
0.16
0.25
0.26
0.16
0.16
0.24
0.24
0.15
0.16
0.13
0.20
0.20
0.13
0.20
0.12
0.20
0,21
0.13
0 13
0.19
0.12
0.16
0.11
0,10
0.16
0.16
0,16
0.16
0.10
0.10
0,16
0.11
0.11
0.094
0.13
0,088
0.13
0.14
0.077
0.082 0.079
0.092
0.13
0.13
0.13
0.074
0.078
0.062
0.067 0.063
0.11
0.10
0.080
0.1 1
0,10
0,11
0.1 1
0.070
0.098
0.10
0.052
0.057 0.054 0.085
0,090
0.086
0.073
0.066
0.094
0.088
0.072
0.065
0.059
0.063
0,082
0.086
0.044
0.049 0.045 0.071
0.076
0.080
0.043 0.039 0.061
0.063
0.060
0.058
0.073
0.077
0.038
0.066
0.053
0.073
0.038 0.035 0.054
0.055
0.056
0.059
0.049
0.053
0.066
0.071
0,033
0.027
0.045
0.050
0,064
0.032 0.029 0,043
0.043
0,048
0.057
0.061
0.048
0.028 0.025 0.036
0.038
0,047
0.058
0.041
0.040
0.051
0.055
0.023
0.044
0,024 0.021
0.043
0.052
0.029
0,031
0.036
0.040
0.045
0.049
0.019
0.034
0.031
0.049
0.019
0.024 0.021 0.029
0.034
0.040
0.052
0.036
0.045
0.043
0.015
0.019 0.018 0.023
0.025
0.040
0.032
0.039
0.042
0.046
0.027
0.036
-----------

-----------

1506

Notes:
1. These values are based on the following constants: UL-type RHH wires with Class B stranding, in cradled configuration. Wire conductivities are 100 percent IACS
copper and 61 percent IACS aluminum, and aluminum conduit is 45 percent IACS. Capacitive reactance is ignored, since it is negligible at these voltages.
These resistance values are valid only at 75C and for the parameters as given, but are representative for 600-volt wire types operating at 60 Hz.
2. Effective Z is defined as R cos(0) + X sin(0), where 0 is the power factor angle of the circuit. Multiplying current by effective impedance gives a good approximation
for line-to-neutral voltage drop. Effective impedance values shown in this table are valid only at 0.85 power factor.
For another circuit power factor (PF), effective impedance (Ze) can be calculated from R and X L values given in this table as follows:
Z e - R x P F + Xt sin[arccos(PF)J.

CHAPTER 9 -TABLES

2.0 (1.6)
3.5 (2.0)
5.5(26)
8.0 (3.2)
14
22
30
38
50
60
80
100
125
150
175
200
250
325
375
400
500

X|, (Reactance)
Wires
PVC, Aluminum
Conduits
0,058
0.054
0.050
0.052
0.051
0.048
0.045
0.046
0.044
0.043
0.042
0.041
0.041
0.041
0.040
0.040
0.039
0.039
0.038
0,038
0.037

9.1.1.9

Conductor Size

Table 9.1.1.9 Alternating-Current Resistance and Reactance for 600-Volt Cables,


-Phase, 60 Hz, 7SC -Three Single Conductors in Conduit

You might also like