A STUDY ON INVENTORY MANAGEMENT WITH REFERENCE TO

LEADING AUTOMOBILE INDUSTRY

NANDINI RAVICHANDRAN
II MBA Student, School of Management, SASTRA University,
Thirumalai Samudram, Thanjavur, Tamil Nadu, India

ABSTRACT
This project was undertaken to analyze the inventory management of Ashok Leyland Ltd. It included the complete
study to conduct Ratio Analysis, ABC and VED Analysis for inventory. This deals about the entire activities of purchase
and stores department to suggest the suitable technique to the company to have improved control over the inventory.
It was found that in the firms master data was not maintained properly on SAP which was the major reason behind the
unmatched sets of parts and excess buying of materials. Also it was found that due to this the production process was
affected in the company. It was suggested that the management of the plant should incorporate Total Quality Management,
particularly in all departments of production to ensure better sales and reduce the inventory of finished products.
While ABC Analysis has shown that the management must have more control on C items than that on A & B items,
because C class constitutes more of higher in numbers. This is done through maintaining low safety stock levels,
continuous check on schedules & ordered frequently in inventories, in order to avoid over investment of working capital.
KEYWORDS: Total Quality Management, SAP, ABC Analysis, VED Analysis
INTRODUCTION
There are three basic types of inventory: raw materials, work-in-progress and finished goods. Raw materials are
the items purchased by firms for use in production of finished product. Work-in-progress consists of all items currently in
the process of production. These are actually partly manufactured products. Finished goods are goods that have completed
the manufacturing process but have not yet been sold or distributed to the end user.
Inventory constitutes one of the important items of current assets, which permits smooth operation of production
and sale process of a firm. Inventory management is that aspect of current assets management, which is concerned with
maintaining optimum investment in inventory and applying effective control system so as to minimize the total inventory
cost.
MEANING & DEFINITION
The term inventory refers to the goods or materials used by a firm for the purpose of production and sale.
It also includes the items, which are used as supportive materials to facilitate production.
Inventory is an idle stock of physical goods that contain economic value, and are held in various forms by an
organization in its custody awaiting packing, processing, transformation, use or sale in a future point of time.
Inventory management refers the overseeing and controlling of the ordering, storage and use of components that a
company will use in the production of the items it will sell as well as the overseeing and controlling of quantities of
finished products for sale.
BEST: International Journal of Management, Information
Technology and Engineering (BEST: IJMITE)
ISSN 2348-0513
Vol. 2, Issue 5, May 2014, 15-28
BEST Journals
16 Nandini Ravichandran
RESEARCH VARIABLES
To find out the cost involved in the entire inventory management process.
To ensure that the supply of raw material & finished goods will remain continuous so that production process is
not halted and demands of customers are duly met.
To minimize carrying cost of inventory.
To keep investment in inventory at optimum level.
To reduce the losses of theft, obsolescence & wastage etc.
To make arrangement for sale of slow moving items.
To minimize inventory ordering costs.
STATEMENT OF THE PROBLEM
A study of inventory management at leading Automobile Company is undertaken in order to know the inventory
performance and position of the company and to know the strength and weakness and to assess the profitability of the
company. Inventories constitute most significant part of assets of large majority of the companies in India.
Inventory a double edged sword is usually an asset of an organization, if not used properly it will become liability.
It is therefore absolutely very important to manage inventories efficiently and effectively in order to overcome unnecessary
investment. And To identify the problems/challenges involved in the Inventory Management process at this company.
OBJECTIVES OF THE RESEARCH
To analyze the inventory management of this company.
To conduct ABC and VED Analysis for inventory
To analyze the entire activities of purchase and stores department
To suggest the suitable technique to the company to have improved control over the inventory.
LIMITATIONS OF THE RESEARCH
Time restriction was only 6 weeks for research in the organization.
The information, which was needed, could not be made public by the organization.
The study is related to the only one leading Automobile Industry only.
The finding and suggestion cannot be generalized.
The study covered a wide concept hence wide collection and coverage of information was not easily possible.
RESEARCH METHODOLOGY
Primary data- The primary data is collected by personal interviews with officials.
Secondary data- Files, annual reports, periodicals, manuals and text book. Which have already been passed
through the statistical process are the secondary data used.
A Study on Inventory Management with Reference to Leading Automobile Industry 17
Field work- This was under taken individually to collect information regarding the study by visiting following
sections.
o Stores department- Information regarding stocking of materials receipts and issues to workshops.
Inventory control procedures in various wards inside the department were obtained.
o Accounts department- Remaining all the information was obtained from accounts department through
personal interviews with section officials.
GENERAL PROBLEMS OF INVENTORY
To maintain a large size inventories for efficient and smooth production and sales operation.
To maintain only a minimum possible inventory because of inventory holding cost and opportunity cost of funds
invested in inventory.
Control investment in inventories and keep it at the optimum level.
SCOPE OF THE STUDY
This study is to find the facts and opinions of inventory management and control at the Automobile plant.
In accordance with the present trends it aims mainly at finding out the inventory control procedures.
This study gives the brief information about the inventory management of the
The study was done by using annual reports, inventory manualetc.
LITERATURE REVIEW
According to Lieberman, Marvin B; Demeester, Lieven (1999) in his article titled Inventory reduction
and productivity growth: Linkages in the Japanese automotive industry published in Management Science has
said that JIT production suggests a causal link between work-in-progress inventory and manufacturing
productivity. Such a connection has been described in numerous case studies but never tested statistically.
Historical data for 52 Japanese automotive companies are used to evaluate the inventory-productivity relationship.
It is found that firms increased their productivity rank during periods of substantial inventory reduction.
More detailed tests suggest that inventory reductions stimulated gains in productivity.
Moon, Ilkyeong (2001) The authors Moon & Ilkyeong published their paper in Interfaces titled
Inventory Management and Production Planning and Scheduling which is the third version of Decision
Techniques for Stock Control and Manufacturing Preparing released in 1979 and 1985. Bob Pyke became a
coauthor for this version and performed a key part in composing significant up-dates of several sections, such as
those on supply-chain management, multi-echelon stocks, just in time, and ERP (enterprise source planning).
In addition, the writers have included worksheet applications for each section as additional components to
improve the audience and usefulness for learners in business applications, and for experts.
As per the authors Jackson, Duncan (2004), TradeBeam and Global eXchange Services Partner to Provide
Collaborative Inventory Management and Interoperability for Automotive Industry, in Business Wire says that
TradeBeam is a Global Trade Management software and services company providing solutions that streamline
global trading processes for enterprises and their partners. TradeBeam's solutions provide import and export
18 Nandini Ravichandran
compliance, inventory management, shipment tracking, supply chain event management and global trade finance
solutions such as open account and letter of credit management. TradeBeam has over 3000 customers with users
in over 100 countries worldwide.
Krishna, L Sivarama; Janardhan, G Ranga; Rao, C S P (2009) in their article Web Integrated Decision Support
System for Machine Scheduling and Inventory Management, was published in IUP Journal of Operations
Management tells about stock management symbolizes the process of managing stocks of completed products,
semi-finished products and raw elements by a company so as to reduce the total stock cost. The first level contains
the development of a organizing program with make span minimization as the primary objective. The second level
contains the development of the stock management program and creating it with the organizing program.
The third level contains creating the program web permitted, so that it provides the flexibility of assigned creating
choices to your selection makers.
According to Snehalgavi (2010) in her article titled It Outsourcing in Indian Automobile Industry
in Business & Economy says Outsourcing is the act of delegating an organizations internal activities and to some
extent the right to decisions to the third party (service vendors) as per specified in the contract. Outsourcing is a
tool, in which the vendor is responsible for certain jobs outsourced by a company, in return of a price for the
goods or service provided by it. This option is exercised majorly because to cut operation costs of a company and
focus on its core competencies. It is basically a contract between two companies or concern in which one is
getting its business process outsourced from another company offering such services.
According to Martin, Benjamin Robert (2010) in his article titled Findlay Automotive group selects first look for
pre- owned inventory management needs, in PR Newswire With 15 brands including Toyota, Honda, Chevrolet,
Cadillac, Saturn, Land Rover, Saab and Volkswagen, Findlay will utilize the First Look product suite to guarantee
the right balance between pre-owned inventory and demand, and ensure that trades are given the best appraisals.
In addition to the inventory management tool, and trade analyzer, Findlay will use the First Look Search Engine
to allow its dealers to instantly search more than 30 online marketplaces to identify the best vehicles that meet that
dealerships pre-owned inventory needs.
As per Koumanakos, Dimitrios P. (2008) in Business Wire titled Hitachi Automotive Improves Efficiency and
Inventory Control with Geac's System 21 says that Hitachi America, Ltd. has streamlined production,
reduced accounting costs and improved supply chain management using Geac's System21 software solution.
Hitachi Automotive implemented three System21 modules in 1998 - financials, manufacturing, and customer
service and logistics - across its three locations in Kentucky, Detroit and Los Angeles. In September 2002,
the company will renew its maintenance contract with Geac(R) for three years.
According to Cachon, Grard P; Olivares, Marcelo (2010), Drivers of Finished-Goods Inventory in the U.S.
Automobile Industry, in Management Science says Automobile manufacturers in the U.S. supply chain exhibit
significant differences in their days of supply of finished vehicles. The objective in this research is to measure for
this industry the effect of several factors on inventory holdings. We find that two factors, the number of
dealerships in a manufacturer's distribution network and a manufacturer's production flexibility,
explain essentially all of the difference in finished-goods inventory between Toyota and three other
manufacturers: Chrysler, Ford, and General Motors.
A Study on Inventory Management with Reference to Leading Automobile Industry 19
As per Moozakis, Chuck (2001), Honda Automates Web Financing -- Network will let dealers apply for funds
online and will eventually support inventory management in Internet Week says that financing unit of American
Honda Motor Co. next month will begin rolling out its Dealer Financial Information Network (DFIN),
a Web system that will help its 3,000 dealers obtain financing for inventory in real time. Currently,
dealers purchasing inventory from Honda need to apply for financing through American Honda Finance Corp.
or another bank. Typically, approvals take several days.
According to the aticle Study of vendor-managed inventory practices in Indian industries by Borade,
Atul B; Bansod, Satish V. (2010) in Journal of Manufacturing Technology Management says that in the global
economy, vendor-managed inventory (VMI) is gradually becoming an important element of supply
chain management strategy of organizations. Recently, Indian industries, both large and small, have started
adopting VMI for their supply chains. The purpose of this paper is to investigate apparent differences among large
and small industries in terms of objectives, drivers, obstacles and impacts of VMI in Indian context. A survey was
conducted to examine organizational objectives, strategic drivers, obstacles and affected operations pursuant to
VMI adoption.
According to Matson, Jack E; Matson, Jessica O (2007), in Just-in-time implementation issues among
automotive suppliers in the southern USA published in Supply Chain Management speaks that
Purpose - The purpose of this paper is to provide insight into the major supply chain issues of the automotive
manufacturing industry in the southern USA. Design/methodology/approach - This paper is based on the results of
a survey of automotive suppliers in Tennessee and Alabama. The survey focused on supply chain issues and
demographics, specifically on 20 JIT-related problems and 100 company characteristics. Findings - Identifies the
extent of JIT implementation in Tennessee's and Alabama's growing automotive industry and the general
characteristics of the companies that use JIT.
DATA ANALYSIS & DISCUSSIONS
Table 1: Position of Sales and Inventory (in Lakhs)
YEAR Mar ' 13 Mar ' 12 Mar ' 11 Mar ' 10 Mar ' 09 Average
Sales 1329856 1372081 1215300 787260 666664 1074232.2
Inventory 189602 223063 220890 163824 133001 186076


Source: Secondary Source
Figure 1
20 Nandini Ravichandran
Table 2: Stock Turnover Ratio (in Times) (in Lakhs)
Year
Net
Sales
Average
Inventory
Stock Turnover
Ratio
Mar ' 13 1329856 206332.5 6.45
Mar ' 12 1372081 221976.5 6.18
Mar ' 11 1215300 192357 6.32
Mar ' 10 787260 148412.5 5.30
Mar ' 09 666664 127696 5.22


Source: Secondary Source
Figure 2
Table 3: Stock Holding Ratio (in Days)
Year Mar ' 13 Mar ' 12 Mar ' 11 Mar ' 10 Mar ' 09 Average
Stock Turnover Ratio (Times) 6.45 6.18 6.32 5.3 5.22 5.894
Stock Holding Ratio (Days) 57 59 58 69 70 62


(Source: Secondary Source)
Figure 3

A Study on Inventory Management with Reference to Leading Automobile Industry 21
Table 4: Cost Based Raw Material Turnover Ratio and Holding Days (in Lakhs)
Year
RM
Consumed
Avg. Stock
of RM
Ratio
Holding
Days
Mar ' 13 74,089.20 76538.68 0.97 376
Mar ' 12 78,988.15 86914.8 0.91 401
Mar ' 11 94,841.45 76723.99 1.24 294
Mar ' 10 58,606.54 55931.99 1.05 348
Mar ' 09 53,257.43 47775.16 1.11 329


Source: Secondary Source
Figure 4
Table 5: Work in Progress Turnover and Holding Days
Year
Factory
Cost
Average
Stock of WIP
WIP
Ratio
Holding
Days
Mar ' 13 12,095.13 14662.54 0.82 445
Mar ' 12 17,229.95 21756 0.79 462
Mar ' 11 26,282.03 30469.14 0.86 424
Mar ' 10 34,656.26 22032.25 1.57 232
Mar ' 09 9,408.24 20812.94 0.45 811


Source: Secondary Source
Figure 5

22 Nandini Ravichandran
Table 6: Stores and Spares Turnover Ratio and Holding Days (in Lakhs)
Year Consumed
Average
Stock
Ratio
Holding
Days
Mar ' 13 9143.39 9458.50 0.97 376
Mar ' 12 9773.60 9512.26 1.03 354
Mar ' 11 9250.91 6445.78 1.44 253
Mar ' 10 3640.68 3644.09 1.00 365
Mar ' 09 3647.49 3915.41 0.93 392


Source: Secondary Source
Figure 6
Table 7: Inventory to Sales Ratio
year Mar ' 13 Mar ' 12 Mar ' 11 Mar ' 10 Mar ' 09 Average
Sales 1329856 1372081 1215300 787260 666664 1074232.2
Inventory 189602 223063 220890 163824 133001 186076
Inventory to Sales Ratio 0.142573331 0.162572764 0.181758 0.2080939 0.1995023 0.17
ISR*100 14.25733312 16.25727636 18.17576 20.8093895 19.9502298 17.32


Source: Secondary Source
Figure 7
Table 8: Operating Cycle Analysis
Year DSI DSO OC
Mar ' 13 57 39 96
Mar ' 12 59 33 92
Mar ' 11 58 35 93
Mar ' 10 69 47 116
Mar ' 09 70 52 122
A Study on Inventory Management with Reference to Leading Automobile Industry 23

Source: Primary Source
Figure 8
Table 9: Cash Conversion Cycle Analysis
Year DSI DSO DPO CCC
Mar ' 13 57 39 57 39
Mar ' 12 59 33 70 22
Mar ' 11 58 35 83 10
Mar ' 10 69 47 140 -24
Mar ' 09 70 52 159 -37


Source: Primary Source
Figure 9
According to the firms Policy the ABC analysis includes a D classification also, and the categorization is done as
follows:
Table 10: ABC Analysis
Category Rate (in Rupees)
A >10000
B >2500-9999
C >40-2499
D <40

24 Nandini Ravichandran
Table 11
Material Material Description Val. Stock Val. Stock Rate
Cate
gory
L1050608 3/8"BSFX1" BOLT 14.87 1,487.00 0.01 D
04784433W SHAFT-C 0.01 1 0.01 D
A-U999-G-50111-029 BELT,FLAT,ENDLESS,NYL,540X30X1.5 38 1 38 D
X1101613 MUD SHIELD-FCT 124.8 2 62.4 C
F1241622 DISTANCE PIECE 7,681.35 123 62.45 C
X7477000 ALTERNATOR 218,993.02 97 2,257.66 C
F8320900 POWER STG PUMP - 4018 20,202.56 8 2,525.32 B
F8334000 STARTER MOTOR 3.2KW 2,544.83 1 2,544.83 B
G01GS221002 SPLINE PLUG GAUGE 5,000.00 0.5 10,000.00 B
A9275500 HA4CTI3S -4CTI BS 3 195,191.33 1 195,191.33 A
B7500818 ARTICULATION UNIT COMPLETE 1,809,242.91 9 201,026.99 A
A9800300 FOR EURO4 240kW 6 CYLINDER 8. 2,672,338.16 2 1,336,169.08 A


Source: Primary Source
Figure 10
Table 12: On the Basis of No. of Items
Category No. of Items Value in %
D 5746 28.485029
C 11673 57.867341
B 1864 9.2405314
A 889 4.4070989

20172 100


Source: Primary Source
Figure 9
A Study on Inventory Management with Reference to Leading Automobile Industry 25
RESEARCH FINDINGS AND DISCUSSIONS
During the first four years i.e. in Financial Year 2008-09 to 2011-12. During the above four years the inventory
level increased from 133001 lakhs to 223063 lakhs. It indicates a positive growth rate of 67.71%. But in the
Financial Year 2012-13 inventory level decreased to 189602 lakhs which was about 17.64% of the inventory value
as maintained in the Financial Year 2011-12. The analysis suggests that the company invested more funds in
inventories during the first four years of study period but in the previous year it has invested less i.e.
in year 2012-13.
The Inventory Turnover Ratio increased from 5.22 to 6.45 with an average of 5.89 this is considered as
unsatisfactory position.
There has been an increasing trend holding days from 2009- 2011 after which it has again declined and started
increasing from the year 2012.
The Raw Material Turnover based on Cost ranges from 1.11 to 0.9. The days of Raw Material Inventory Holding
Period gives the time period of holding inventory. It implies high carrying cost. But in the year 2012-2013 the
company has tried to reduce the holding days and it indicates the reduction of carrying cost which proves the
effectiveness of a system of inventory management.
The Work in Progress Inventory turnover and of inventory holding. We can observe that the firms average WIP
turnover ranges from 0.45 to 0.82. The company has to work more on the work in progress as the holding days are
more.
The firms Stores and Spares Turnover ranges to 0.97 and also the holding days indicate management has to reduce
the holding days to a huge extent.
Inventory to Sales Ratio: The percentage of inventories the company currently has on hand to support the
current amount of sales. A decreasing Inventory to Sales ratio in the Financial Year 2013 indicates a positive sign.
Operating Cycle Analysis: It has been decreasing trend in Operating Cycle. There has been a significant
decrease in the operating cycle from 2009 to 2013. The Operating Cycle is same in the year 2011 and 213,
compared to which the financial year 2013 requires a greater working Capital.
Cash Conversion Cycle Analysis: The firm needs to get goods 57 days before it will actually sell the resulting
goods. The first 57 days of that time, it will not yet have paid its suppliers. But that leaves 0 days (57-57) that it
will have to hold inventory that has already been paid for but that has not yet been sold. Then, after making the
sale it will have to wait for another 39 days before it can collect the cash from its own customers.
The total is 39 days that the company must be able to operate without the cash its operations will eventually
generate.
ABC Analysis: This firm also has a D Category items apart from AB & C items. It has to buy more of C
Category items rather than AB and D but at the same time it has to keep a close watch on Focused goods that is
high valued goods as it is kept in low volume but a close assistance is given since value of these goods is high.


26 Nandini Ravichandran
RESEARCH RECOMMENDATIONS
Under the ABC analysis, the management must have more control on C items than that on A & B items, because
C class constitutes more of higher values. There should not be tight control exercised on stock levels, to avoid
deterioration. This is done through maintaining low safety stock levels, continuous check on schedules & ordered
frequently in inventories, in order to avoid over investment of working capital.
The past data shows increase in inventory the company is expecting more inventories for the future period i.e.
2014. The management is required to maintain the same trend in the forth coming year also.
The company has to keep the master data that is SAP data timely updated so as there are no unmatched sets and
excess of the unwanted buying of the same time of material parts.
The inventory turnover ratio indicates whether investment in inventory is within proper limit. It also measures
how quickly inventory is sold. It requires maintaining a high turnover ratio than lower ratio. A high turnover ratio
implies that good inventory management and timely the inventories are being replenished, also reflects efficient
business activities.
The management of the plant should incorporate TQM (Total Quality Management), particularly in all
departments of production to ensure better sales and reduce the inventory of finished products.
CONCLUSIONS
In this study, a better inventory management will surely be helpful in solving the problems the company is facing
with respect to inventory and will pave way for reducing the huge investment or blocking of money in inventory. Inventory
is the physical asset of a company that can create problem if there is shortage, while in production and also if its in excess
even after production. Inventory is constantly changing as quantities are sold and replenished.
Since the Inventory Turnover Ratio shows the increasing trend, there will be more demand for the products in the
future periods. If they could properly implement and follow the norms and techniques of inventory management, they can
enhance the profit with minimum cost. From the study it is predicted that future sales have to be achieved and inventory
level have to be maintained. The company has to periodically review the inventory to avoid production loss. Hence it can
be understood that efficient inventory management can take the company to new heights and inefficient inventory
management can ruin the company.
REFERENCES
1. Lieberman, Marvin B; Demeester, Lieven (1999), Inventory reduction and productivity growth: Linkages in the
Japanese automotive industry, Management Science (45.4).
2. Moon, Ilkyeong (2001), Inventory Management and Production Planning and Scheduling, Interfaces ( 31.6),
Pg.-125-127.
3. Jackson, Duncan (2004), TradeBeam and Global eXchange Services Partner to Provide Collaborative Inventory
Management and Interoperability for Automotive Industry, Business Wire
4. Krishna, L Sivarama; Janardhan, G Ranga; Rao, C S P (2009), Web Integrated Decision Support System for
Machine Scheduling and Inventory Management, IUP Journal of Operations Management (8.1), Pg.- 35-52.
5. Snehalgavi (2010), It Outsourcing in Indian Automobile Industry, Business & Economy.
A Study on Inventory Management with Reference to Leading Automobile Industry 27
6. Martin, Benjamin Robert (2010), Findlay Automotive group selects first look for pre- owned inventory
management needs, PR Newswire
7. Koumanakos, Dimitrios P. (2008), Hitachi Automotive Improves Efficiency and Inventory Control with Geac's
System21, Business Wire.
8. Cachon, Grard P; Olivares, Marcelo (2010), Drivers of Finished-Goods Inventory in the U.S.
Automobile Industry, Management Science.
9. Moozakis, Chuck (2001), Honda Automates Web Financing -- Network will let dealers apply for funds online
and will eventually support inventory management, Internet Week 850.
10. Borade, Atul B; Bansod, Satish V. (2010), Study of vendor-managed inventory practices in Indian industries,
Journal of Manufacturing Technology Management (21.8), Pg.- 1013-1038.
11. El-Khalil, Raed; Farah, Maya F (2013), Lean Management Adoption Level in Middle Eastern Manufacturing
Facilities, Business Review Cambridge 21.2, Pg.- 158- 167.
1 2. http://www.indianjournals.com/ijor.aspx?target=ijor:zijmr&type=for_authors