Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    GB

    Uploaded by

    Rolando Soledad
    Permanent magnet (M) mounted on the piston of the air cylinder activates the REED SWITCH of the non-contact magnetic position detector. Detector supplied with mounting kit (integrated) for direct fitting to cylinder grooves 0,15 m PVC lead + 3-pin plug-in male connector and O M8 MAX.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GB

    Uploaded by

    Rolando Soledad
    61 views2 pages
    Permanent magnet (M) mounted on the piston of the air cylinder activates the REED SWITCH of the non-contact magnetic position detector. Detector supplied with mounting kit (integrated) for direct fitting to cylinder grooves 0,15 m PVC lead + 3-pin plug-in male connector and O M8 MAX.

    Original Title

    00238 Gb

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Permanent magnet (M) mounted on the piston of the air cylinder activates the REED SWITCH of the non-contact magnetic position detector. Detector supplied with mounting kit (integrated) for direct fitting to cylinder grooves 0,15 m PVC lead + 3-pin plug-in male connector and O M8 MAX.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    61 views2 pages

    GB

    Uploaded by

    Rolando Soledad
    Permanent magnet (M) mounted on the piston of the air cylinder activates the REED SWITCH of the non-contact magnetic position detector. Detector supplied with mounting kit (integrated) for direct fitting to cylinder grooves 0,15 m PVC lead + 3-pin plug-in male connector and O M8 MAX.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Weight (g) 21 51 7 14

    A permanent magnet (M) which is mounted on the piston of the air cylinder
    activates the reed switch of the non-contact magnetic position detector fastened
    on the outside of the non-magnetic cylinder barrel.
    FUNCTIONAL DESCRIPTION
    DETECTOR CHARACTERISTICS
    PVC lead, 2 m long,
    2 wires 0.14 mm
    2
    ,
    stripped and tinned
    ends
    PVC lead, 5 m long,
    2 wires 0.14 mm
    2
    ,
    stripped and tinned
    ends
    0.15 m PVC lead + 3-pin
    screw-type male
    connector, M12
    2 metres 5 metres
    REST POSITION DETECTED POSITION
    (M)
    (M)
    CONNECTION
    (3 possibilities / 4 types at choice)
    88100733 88100734 88100735 88100736
    Reed switch type "T" de-
    tector + mounting kit (1)
    (for direct mounting on cylin-
    ders with "T" slot)
    CODES Description

    Compatible
    cylinders
    PES
    series 453
    ACCESSORIES AND OTHER ELECTRICAL CHARACTERISTICS: see following page
    (1) Detector supplied with mounting kit (integrated) for direct tting to cylinder grooves
    0,15 m PVC lead + 3-pin
    plug-in male
    connector and M8
    MAX. SWITCHING POWER 6 W
    SWITCHING VOLTAGE 10 to 30 VDC and AC
    MAX. SWITCHING CURRENT 200 mA
    VOLTAGE DROP (EN 60.947-5-2) < 3 volt (I = 200mA)
    CONTACT RESISTANCE max. 0,15
    INSULATION RESISTANCE > 100 M
    WITHSTAND VOLTAGE 200 V DC
    SENSITIVITY min. 2,5 mTesla (25 Gauss)
    RESPONSE TIME opening 0,3 ms
    closing 0,1 ms
    REPEATABILITY 0,5 mm
    LIFE 10
    7
    operations (resistive load)
    WORKING TEMPERATURE - 15C , + 70C
    HOUSING Thermoplastic housing (PA) with epoxy resin encapsulated printed circuit
    DEGREE OF PROTECTION (CE I 529) IP67
    SIGNAL INDICATION orange diode (LED) which lights up when the contact is established
    "T SLOT" MAGNETIC
    POSITION DETECTORS
    reed switch type
    for series 453 PES type cylinders
    Series
    881
    Type
    2 wires
    0
    0
    2
    3
    8
    G
    B
    -
    2
    0
    0
    5
    /
    R
    0
    1
    B
    All leaets are available on: www.ascojoucomatic.com
    P292-1
    (1) Extension for M8 connector detectors.
    (2) Detector connection: brown and black wires (detector is unpolarised), blue wire not used
    (3) For your order please add the requested length (in metres) to the order code 88100746. Example: 2 m = 88100746 2
    2,5 m = 88100746 3
    100
    4 W
    100
    4 W
    0,1 F
    250 V
    100
    150
    200
    50
    V V
    0 10 20 30 40 10 20 30 40
    l (mA)
    0,1 F
    250 V
    R
    C
    RESISTIVE
    LOAD
    INDUCTIVE
    LOAD
    Protection
    not necessary
    Load
    Load
    DC AC
    MAXIMUM ELECTRICAL CHARACTERISTICS AND PROTECTION OF MAGNETIC DETECTOR (REED SWITCH)
    REED SWITCH CONNECTION : 3 possibilities
    View from male contact
    side of connector
    PVC lead outlet 3 mm with 3-pin screw-type male connector,
    M12 (2 pins connected)
    The detectors reed switch
    are not polarized
    (Diode polarized)
    PARTICULAR APPLICATIONS (valid for all models)
    Detectors used for direct control of incandescent lamps:
    The capacity specied on the lamp is based on its resistance
    when hot. When switched on, the resistance of the cold lamp is
    very low. Therefore, the current rises quickly and may exceed
    the reed switch rating. Allowance should therefore be made for
    the real power of the cold lamp.
    With leads longer than 10 m, a 1000 W resistor must be tted in
    series with the detector to reduce the capacitive effect caused
    by the wiring.
    PVC lead outlet 3 mm with 3-pin plug-in male connector + screw
    M8 (2 pins connected)
    PVC lead outlet 3 mm with stripped ends,
    2 wires 0.14 mm
    2

    1
    3 4
    1 3
    4
    0,15 m
    0,15 m
    2 / 5 m
    Note: The switching point must
    remain within the limits of the
    shaded area. Any excess vol-
    tage or power may damage the
    detector.
    R = 4 W resistor. Standard CCTU resistors code RP 59,
    C = paper, polycarbonate or metallized mylar capacitor.
    The user is responsible for supplying and assembling of compo-
    nents.
    1 3
    4
    CM5
    1 3
    4
    CM5
    CODE
    88100239
    88100238
    Description
    Extension cord made of PVC, length 5 m, 3 wires 0.25 mm
    2
    with 1 screw-type female M8 connector (other end stripped) (1) (2)
    Extension cord made of PVC, length 5 m, 3 wires 0.25 mm
    2
    with 1 screw-type female M12 connector (other end stripped) (2)
    Straight 3-pin female connector M8, IP67
    Right angle 3-pin female connector M8, orientable 90 x 90, IP67
    88100202
    88100203
    ACCESSORIES
    Cable cover and holder
    (sold by the metre - minimum length = 1 m)
    88100746
    (3)
    5 m
    br = 1
    blk= 4
    blu= 3
    1
    4 3
    2
    PVC
    5 m
    br = 1
    blk= 4
    blu= 3 1
    4
    3
    PVC
    DIMENSIONS
    5
    34
    The magnetic detector ts directly into the grooves in the cylinder body. Detection of very small movements or very short stro-
    kes means that more than one groove will have to be used.
    INSTALLATION RECOMMENDATION
    In order to control the max. end of cylinder stroke, the detectors
    must be mounted in the following direction:
    PES cylinders series 453 32-100 : cable oriented towards the
    cylinder barrel.
    brown +
    blue -
    "T SLOT" DETECTORS - REED SWITCH TYPE
    0
    0
    2
    3
    8
    G
    B
    -
    2
    0
    0
    5
    /
    R
    0
    1
    A
    S
    C
    O
    /
    J
    O
    U
    C
    O
    M
    A
    T
    I
    C

    r
    e
    s
    e
    r
    v
    e
    s

    t
    h
    e

    r
    i
    g
    h
    t

    t
    o

    a
    l
    t
    e
    r

    t
    h
    e

    a
    v
    a
    i
    l
    a
    b
    i
    l
    i
    t
    y
    ,

    d
    e
    s
    i
    g
    n

    a
    n
    d

    s
    p
    e
    c
    i

    c
    a
    t
    i
    o
    n
    s

    w
    i
    t
    h
    o
    u
    t

    n
    o
    t
    i
    c
    e
    .
    All leaets are available on: www.ascojoucomatic.com
    P292-2

    You might also like