Dodge Sleeve Bearings

Sleeve Bearings
Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-2
IMPERIAL - ISAF
CONTENTS
Specification/How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-4

Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-5
Selection
SOLIDLUBE - Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-6
Babbitted and Bronze-Bushed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-10
BRONZOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-12
Selection/Dimensions
UNIFIED SAF
SOLIDLUBE - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-8
SOLIDLUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-14
Babbitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-36
Bronze-Bushed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-46
BRONZOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-50
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
SLEEVOIL
Sleeve Bearing
Key Word Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-34
International Bearings
Shaft Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-52
B13-1
sleeve_toc.indd B13-1
3/23/07 3:07:04 PM
IMPERIAL - ISAF
FEATURES/BENEFITS
Sleeve Bearings
SOLIDLUBE . . . . . . . . . . . . . . . .
Self-Lubricating, Statically Self-Aligning Bearings for

Extreme Industrial Applications
Good in temperature extremes and inaccessible
locations.
Will function effectively in a vacuum.
UNIFIED SAF
Ideal where bearings are subject to dry cycles or

where lube systems would be too costly.
Usable in many corrosive (chemical) medias.
Will operate in submersible applications of some low
viscosity liquids.
Recommended for slow speeds and limited shaft
movement applications.
Sleeve Bearing
SLEEVOIL
B13-2
sleeve_fea_ben.indd B13-2
3/23/07 3:07:49 PM
IMPERIAL - ISAF
FEATURES/BENEFITS
Sleeve Bearings
BABBITTED AND
BRONZE-BUSHED
BEARINGS . . . . . . . . . . . . . . . . .
GOOD FOR SLOW SPEEDS AND SHOCK

LOADS
MPTA LOAD RATINGS
Cast Iron Housings
UNIFIED SAF
2 and 4 Bolt Housings
Babbitted
Solid or Fully Split Housing
Babbitted Bearing Surface
Bronzed-Bushed
Fully Split Housing
Replaceable Split Bronze Bushings
Sleeve Bearing
Brass Locking Spool for Easy Bushing Replacement
BRONZOIL . . . . . . . . . . . . . . . . .
Self Oiling Bushing Feeds Oil to Shaft
Split Pressed Steel Housing
Bushing Shoulder Provides Self-Lubricating Bearing
Thrust Surface
Slotted Bolt Holes
Oil Resistant Rubber Grommets Available for Sound
Isolation and Static Electricity Protection
SLEEVOIL
Statically Self-Aligning
B13-3
sleeve_fea_ben.indd B13-3
3/23/07 3:07:49 PM
IMPERIAL - ISAF
SPECIFICATION/
HOW TO ORDER
Sleeve Bearings
UNIFIED SAF
HOW TO ORDER SLEEVE BEARINGS
Babbitted
There are two ways to specify DODGE Sleeve

Bearings. Most of the product offering have part
numbers with listings shown throughout this catalog.
Use of part numbers ensures accurate order
processing.
Grease lubricated for moderate speeds and loads, ambient

temperature to 130F, babbitt accurately bored to insure
even load distribution for conveyor shafts, heavy gear, and
chain drives use.
When part numbers are not shown, the product may be

specified by description or part name. This method is
used when ordering units that include modifications or
options. To order by description, use the nomenclature
key shown on page B13-5 and add any special
instructions to the end of the description for options not
covered by the nomenclature.
Bronze-Bushed
Grease lubricated for moderate speeds, ambient
temperature to 300F and heavy loads or shock loads
make the advantage of a precision replaceable bronze
bushing desirable. Other bushing material is available on a
special order basis, such as bronze with graphite plugs, or
phenolic resin on nylon.
SOLIDLUBE
BRONZOIL
Statically self-aligning, non-galling, solid-film lubricating for

temperature extremes.
Economical, statically self-aligning, and self-lubricating

pillow blocks and four-bolt flange units for fans, light
machinery, and other general use; ambient temperature to
180F.
700 Series:
-40 to 700F
1000 Series:
-200 to -40F; 250F to 1,000F
800 Series:
-40 to 800F
Also suitable for submerged and limited movement

applications.
Sleeve Bearing
SLEEVOIL
B13-4
sleeve_spec_hto.indd B13-4
3/23/07 3:08:14 PM
IMPERIAL - ISAF
NOMENCLATURE
Sleeve Bearings
SLEEVE BEARING NOMENCLATURE
P2B - LT7 - 108 - SH
BO
BASO
BASP
BAR
BAA
BAP
BZSP
BZR
BZA
LT7
P4B
F2B
F4B
HNG
NSTU
SCHB
Wide Slot Take-Up

Tape Base
Flange Bracket
SHAFT SIZE:
BRONZOIL
115 First Digit: Number Of Inches
Babbitted Solid
Second And Third Digit: Sixteenths Of An Inch
Babbitted Split
115 Indicates 1-15/16
Babbitted Rigid
50M FIRST TWO DIGITS: Bore In Millimeters;
Babbitted Angle
M : Indicates Metric Dimension
Babbitted Plate
Bronze Bushed Split
Bronze Bushed Rigid
Bronze Bushed Angle
SOLIDLUBE LT700
Series
LT10
SOLIDLUBE LT 1000 Series
LTB7 SOLIDLUBE Lower Backing Height
On Pillow Blocks For LT700 Series
LTB10 SOLIDLUBE Lower Backing Height
On Pillow Blocks For LT1000 Series
LT7NP SOLIDLUBE LT700 Series Nickel Plate
LM8
SOLIDLUBE LM800
Series
MM7 SOLIDLUBE MM700
Series
MM10 SOLIDLUBE MM1000
Series
SLEEVOIL
WSTU
TB
FB
Pillow Block, 2 Bolt

Base
Pillow Block, 4 Bolt
Base
Flange, 2 Bolt
Flange, 4 Bolt
Hanger Bearing
Narrow Slot Take-Up
Screw Conveyor
Hanger Bearing
STYLE:
P2B
Sleeve Bearing
HOUSINGS:
UNIFIED SAF
MODIFICATIONS/FEATURES:
SH Stainless Steel Housing
(Available with SOLIDLUBE LT
Series Only)
B13-5
sleeve_spec_nom.indd B13-5
3/23/07 3:09:48 PM
IMPERIAL - ISAF
SELECTION
Sleeve Bearings - SOLIDLUBE - Inch
Bearing Size
UNIFIED SAF
Select a bearing from tables for normal loads or loads in limited shaft
movement applications having a radial load equal to or greater than the actual
load. This simple method is all that is required for the majority of general
machine applications using commercial steel shafting and operating in a
dry atmosphere. (For more favorable conditions, ratings may be increased
somewhat; consult factory). Shaft collars may be used for slight amounts of
thrust. Generally the rule of 10% of the radial load applies. Dirty environments
will reduce bearing life and should be avoided. Losses due to friction can be as
high as 30% depending on speed, lead, temperature and shaft material.
Shafting
+1000F
Too
Hot
+700F
Commercial steel shafting is good in applications where temperatures do not

exceed 700F. However, for extended bearing life, at any temperature, the
shaft should be hardened to 35 Rockwell C or better. Shaft finish should be
10 to 20 micro-inches. A finish rougher than 20 will lessen bearing life. A finish
smoother than 10 will not allow the optimum lubricant film to develop. Shaft
tolerance should be +.000/-.002 for commercial steel shafting. If using other
shaft materials, consult DODGE for the shaft tolerance and thermal expansion.
When commercial shafting is exposed to a corrosive media, it will oxidize. A

rusty shaft will grow in the bearing, thus eliminating clearances. In this case
stainless steel shafting may be used and/or provide for regularly scheduled
movement of shaft. In elevated temperatures stainless grades such as 17-4,
15-5, or 13-8 are hardenable. Shafts can be spray coated with ceramic or hard
chrome. This is good up to about 800F. Check with your supplier, since these
coatings can flake off when the coefficient of thermal expansion of the base
material differs greatly from that of the coating.
+250F
Not
High grade specialty shafting may be used in excess of 1000F. It may be less
expensive to use sleeves of this material on more economical shafting.
Applicable
Noise or High Pitched Squeal
Moisture
Tends to
Gum Up Brg.
-40F
-40F
Sleeve Bearing
-200F
Too
Cold
Carbon-graphite bushings can develop a high frequency vibration in resonance

with the operating system to cause noise. Dampening or change of resonant
frequency of the shaft is required to eliminate noise.
Specials
SOLIDLUBE bearings or bearings made from alternate bushing materials such
as polymers, fibers, bronze, etc. for unusual operating and load conditions are
available on a specially engineered basis by supplying the following:
Shaft size, material and rpm.
Normal load, shock load and frequency.
700 Series
1000 Series
SLEEVOIL
SOLIDLUBE
Bearing
Operating
Temperature
Direction of load.
Ambient temperature and atmospheric conditions (water, dirt, corrosive, etc.)
Type of bearing: pillow block, flange bearing, etc.
Housing material desired.
Quantity.
End Closures
Ball Bearing end Closures are available (B3-136).
Note: SOLIDLUBE bearings are not designed for rotating housing
applications
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION/DIMENSIONS
PAGE B13-14
B13-6
sleeve_sel.indd B13-6
3/23/07 3:10:36 PM
Sleeve Bearings - SOLIDLUBE - Inch

SOLIDLUBE 700, 1000 and 800 Series
SOLIDLUBE Bearing 700 and 1000 Series Radial Load Ratings in Pounds (Normal Loads)
Chemical
Solvents
Salts
Gases
Alkalis
(Bases
& Alkaline
Solutions)
Acids and
Acidic
Solutions
Mineral (Non-Oxidizing)
Mineral (Oxidizing)
Inorganic Salts (Acid Forming)
Organic (Strong)
Organic (Weak) pH 3-7
Organic Salts (Acid Forming)
Mineral (Non-Oxidizing)
Mineral (Oxidizing)
Inorganic Salts (Base Forming)
Organic (Strong)
Weak Organic Bases pH 7-11
Acid
Alkaline (base)
Anhydrous (dew Point below -30F)
Cyrogenic (Liqueed)
Inert
Oxidizing
Reducing
Acid Salts
Alkaline Sales
Metals
Neutral Salts
Neutral Salt Solutions
Aliphatic
Aromatic
Chlorinated, Fluorinated
Oxygenated, Suldes
Good. Not known interaction; compatible
Questionable (depends on conditions)
Not recommended
FEATURES/BENEFITS
PAGE B13-2
Bearing Series
LM800
1000
700
Note:
For compatibility or specic chemical, contact Application

Engineering
700 and 1000 Series SOLIDLUBE Bearing

Radial Load Rating in Pounds
(Limited Shaft Movement Applications)
Max. Radial Load
Max.
Base
Cap or Side
Thrust
Loaded
Loading
3/4
1100
775
56
7/8, 15/16, 1
1500
795
75
1-1/8, 1-3/16
2100
820
105
1710
161
1-1/4, 1-3/8, 1-7/16, 1-1/2
3200
1-11/16, 1-3/4
4000
1905
198
1-15/16, 2
4700
1920
236
2-3/16
5700
1900
287
2-7/16, 2-1/2
7500
2360
376
2-15/16, 3
12,000
4151
597
Use only when shaft movement is limited to approx. 90. Movement is infrequent as opposed to continuous and maximum bearing temperature is 700F.
Shaft Size
Sleeve Bearing
Type of
Chemical
LM800
Radial Load Ratings
Bearing
Max. Radial
Max. Radial
Size
Base Load
Cap Load
3/4
560
560
1
750
600
1-1/4
1610
600
1-1/2
1610
600
Note: These load ratings are to be used only when shaft rotation is less than
10 RPM and temperature does not exceed 800 F. Maximum allowable
thrust load is 50 lbs.
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SLEEVOIL
SOLIDLUBE Bearing Corrosion (Chemical) Resistance
450
125
130
150
190
200
205
225
265
345
445
510
...
...
2500
22
Radial Load Ratings in Pounds at various Revolutions per Minute

Up to 10
25
50
75
100
150
200
250
300
350
400
3/4
560
560
560
560
560
380
285
230
190
165
145
750
750
610
405
315
245
205
175
155
750
750
7/8, 15/16, 1
1-1/8, 1-3/16
1050
1050
1050
908
680
450
340
270
225
190
170
1-1/4, 1-3/8, 1-7/16, 1-1/2
1610
1610
1610
1140
855
570
430
340
280
245
215
1-11/16, 1-3/4
1980
1980
1790
1190
895
595
440
390
295
255
220
1-15/16, 2
2360
2360
1860
1240
930
620
465
370
310
265
235
2-3/16
2870
2870
2010
1340
1000
670
500
400
335
285
250
2-7/16, 2-1/2
3760
3760
2360
1580
1180
795
590
475
390
340
295
2-15/16, 3
5970
5970
3120
2070
1560
1040
780
625
515
445
390
3-7/16, 3-1/2
9100
8010
4000
2670
2000
1340
1000
800
670
570
500
3-15/16, 4
11800
9160
4590
3060
2290
1530
1150
930
765
665
575
4-7/16, 4-1/2
15200
10300
5150
3440
2580
1720
1290
1030
860
740
645
4-15/16, 5
18400
11400
5710
3810
2860
1910
1430
1140
955
815
...
Shaft Size
500
550
600
700
800
900
1000
1100
1300
1600
1900
2200
3/4
110
105
96
82
72
64
57
52
44
35
30
26
105
90
80
70
60
54
47
38
32
7/8, 15/16, 1
120
110
1-1/8, 1-3/16
135
125
115
97
85
75
68
62
42
42
1-1/4, 1-3/8, 1-7/16, 1-1/2
170
155
145
120
105
95
86
78
66
1-11/16, 1-3/4
180
165
150
130
110
99
89
81
1-15/16, 2
185
170
155
135
115
105
2-3/16
200
180
165
145
125
2-7/16, 2-1/2
235
215
195
170
2-15/16, 3
345
315
290
3-7/16, 3-1/2
400
365
NOTE: The above ratings apply to all base loaded pillow blocks, all cylindrical units and flange type bearings (up to 700F). For
flange bearings operating at temperatures above 700F, cap and side loading of pillow blocks consult Application
Engineering. For operations speeds below heave line, use LT1000 and/or hardened shaft.
Shaft Size
UNIFIED SAF
IMPERIAL - ISAF
SELECTION
PAGE B13-14
B13-7
3/23/07 3:10:37 PM
IMPERIAL - ISAF
SELECTION
Sleeve Bearings - SOLIDLUBE - Metric
Bearing Size
+537C
Select a bearing from tables for normal loads or loads in limited shaft
movement applications having a radial load equal to or greater than the actual
load. This simple method is all that is required for the majority of general
machine applications using commercial steel shafting and operating in a
dry atmosphere. (For more favorable conditions, ratings may be increased
somewhat; consult factory). Shaft collars may be used for slight amounts of
thrust. Generally the rule of 10% of the radial load applies. Dirty environments
will reduce bearing life and should be avoided. Losses due to friction can be as
high as 30% depending on speed, load, temperature and shaft material.
UNIFIED SAF
Shafting
Too
Hot
Commercial steel shafting is good in applications where temperatures do not

exceed 370C. However, for extended bearing life, at any temperature, the
shaft should be hardened to 35 Rockwell C or better. Shaft finish should
be .25 to .50 micro-meters. A finish rougher than .50 will lessen bearing
life. A finish smoother than Ra. 25 micro-meters will not allow the optimum
lubricant film to develop. Shaft tolerance should be +.000/-.051 millimeters for
commercial steel shafting. If using other shaft materials, consult DODGE for the
shaft tolerance and thermal expansion.
+370C
+120C
Not
Applicable
Moisture
Tends to
Gum Up Brg.
-40C
-40C
-128C
Too
Cold
When commercial shafting is exposed to a corrosive media, it will oxidize. A

rusty shaft will grow in the bearing, thus eliminating clearances. In this case
stainless steel shafting may be used and/or provide for regularly scheduled
movement of shaft. In elevated temperatures stainless grades such as 17-4,
15-5, or 13-8 are hardenable. Shafts can be spray coated with ceramic or hard
chrome. This is good up to about 425C. Check with your supplier, since these
coatings can flake off when the coefficient of thermal expansion of the base
material differs greatly from that of the coating.
High grade specialty shafting may be used in excess of 537C. It may be less
expensive to use sleeves of this material on more economical shafting.
Noise or High Pitched Squeal

Carbon-graphite bushings can develop a high frequency vibration in resonance
with the operating system to cause noise. Dampening or change of resonant
frequency of the shaft is required to eliminate noise.
Specials
Sleeve Bearing
700 Series
1000 Series
SOLIDLUBE
Bearing
Operating
Temperature
SOLIDLUBE bearings or bearings made from alternate bushing materials such

as polymers, fibers, bronze, etc. for unusual operating and load conditions are
available on a specially engineered basis by supplying the following:
Shaft size, material and rpm.
Normal load, shock load and frequency.
Direction of load.
Ambient temperature and atmospheric conditions (water, dirt, corrosive, etc.)
Type of bearing: pillow block, flange bearing, etc.
Housing material desired.
Quantity.
SLEEVOIL
End Closures
Ball Bearing End Closures are available (Page B3-136).
Note: SOLIDLUBE bearings are not designed for rotating housing
applications
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
PAGE B13-14
B13-8
3/23/07 3:10:37 PM
SOLIDLUBE BEARING 700 and 1000 SERIES

SOLIDLUBE Bearing 700 and 1000 Series Radial Load Ratings in Newtons (N) Normal Loads
Series
204
205
206
207
209
210
212
215
Shaft Size
20mm
25mm
30mm
35mm
40mm, 45mm
50mm
60mm
70mm, 75mm
Series
204
205
206
207
209
210
212
215
Shaft Size
20mm
25mm
30mm
35mm
40mm, 45mm
50mm
60mm
70mm, 75mm
10
2490
3340
4670
7160
8800
10500
16700
26500
25
2490
3340
4670
7160
8800
10500
16700
26500
500
490
530
600
760
800
820
1040
1530
550
470
490
560
690
730
760
960
1400
Radial Load Ratings in Newtons at Various Revolutions per Minute

50
75
100
150
200
250
300
350
2490
2490
2490
1690
1270
1020
840
730
3340
3340
2710
1800
1400
1090
910
780
4670
4040
3020
2000
1510
1200
1000
840
7160
5070
3800
2540
1910
1510
1240
1090
7960
5290
3980
2650
1960
1740
1310
1130
8270
5520
4140
2760
2070
1650
1380
1180
10500
7030
5250
3540
2620
2110
1730
1510
13900
9200
6940
4630
3470
2780
2290
1980
Radial Load Ratings in Newtons at Various Revolutions per Minute
600
700
800
900
1000
1100
1300
1600
1900
430
360
320
200
250
230
200
160
130
470
400
360
310
270
240
210
170
140
510
430
380
330
300
280
190
190
640
530
470
420
380
350
300
..
.
670
580
490
440
400
360
...
..
.
690
600
510
470
...
...
...
..
.
870
760
...
...
...
...
...
..
.
1290
...
...
...
...
...
...
..
.
400
640
690
760
960
980
1040
1310
1740
2200
120
..
..
..
..
..
..
450
560
580
670
840
890
910
1180
1540
2500
100
. ..
.
.
.
.
.
.
NOTE: The above ratings apply to all base loaded pillow blocks, all cylindrical units an flange type bearings
(up to 370C). For flange bearings operating at temperatures above 370C, cap and side loading of
pillow blocks consult Applications Engineering. For operation speeds below heavy line, use LT1000
and/or hardened shaft.
Series
204
205
206
207
209
210
212
215
Shaft Size
20mm
25mm
30mm
35mm
40mm, 45mm
50mm
60mm
70mm, 75mm
Max. Radial Load

Base
Cap or Side
Loaded
Loading
4890
3450
6670
3540
9340
3650
14200
7600
17800
8470
20900
8540
33400
10500
53400
18500
Sleeve Bearing
SOLIDLUBE Bearings
700 Series and 1000 Series
Radial Load Ratings in Newtons (N)
(Limited Shaft Movement Applications)
Max.
Thrust
Load
250
330
470
720
880
1050
1670
2660
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SLEEVOIL
Use only when shaft movement is Limited to approx. 90

Movement is infrequent as opposed to continuous and maximum bearing
temperature is 370C.
FEATURES/BENEFITS
PAGE B13-2
Sleeve Bearings - SOLIDLUBE - Metric
UNIFIED SAF
IMPERIAL - ISAF
SELECTION
PAGE B13-14
B13-9
3/23/07 3:10:37 PM
IMPERIAL - ISAF
SELECTION
Sleeve Bearings - Babbitted and Bronze-Bushed
General Information
SCOPE-for Stock Babbitted and Bronze Bushed
Bearings, Pillow Blocks and Take-Ups of the
Rigid, Grease Lubricated Type.
UNIFIED SAF
Important-Referring to Table and Table on the opposite

page: Table ratings apply to the following DODGE
Babbitted Sleeve Bearings:
Solid Journals
thru 7, at right, are met. If these conditions cannot be

met, select a bearing for an Equivalent Radial Load to
be obtained by multiplying the Actual Radial Load by
a service factor depending on the specific application.
Use a factor of up to 2.0 for areas in the rating table to
the left of the zigzag line. Use a factor of up to 3.0 for
areas to the right of the zigzag line.
Rigid Babbitted Pillow Blocks
Load ratings are based on industry standard ratings

established by the Mechanical Power Transmission
Association. (Standard No. 401)
Angle Babbitted Pillow Blocks
Operating Conditions
Plate Type Flange Bearings
1. Maintain adequate grease lubrication.
Type H Take-Ups
2. Maintain proper bearing alignment for uniform

distribution of load under all operating conditions.
Split Babbitted Journals
Type A and B Take-Ups

Table 2 ratings apply to DODGE Bronze Bushed Pillow

Blocks:
Split Bronze Bushed Journals
Rigid Bronze Bushed Pillow Blocks
Angle Bronze Bushed Pillow Blocks
Note - Ratings do not apply to BRONZOIL, Polymer
SLEEVOIL or SOLIDLUBE pillow blocks.
Reference - Flush type reducer bushings to be used
with Part Number 405015 1/8 NPT grease fitting:
Sleeve Bearing
Part No.
Description
430081
1/2 x 1/8
430086
3/8 x 1/8
430085
3/8 x 1/4
430087
1/4 x 1/8
430088
1/2 x 1/4
Selection - Select a bearing from rating tables having

a radial load equal to or greater than the Actual Radial
Load, provided that operating conditions numbered 1
3. Normal running loads must not exceed ratings shown

in the load tables. Starting and occasional peak
loads should not exceed ratings by more than 100%.
4. Direction of load should not be closer than 30 to
grease groove or closer than 30 to the joint between
cap and base. If direction of load falls within this area
which is not recommended, decrease maximum load
by 50%.
5. The shaft journal surface finish must be equal to that
of commercial steel shafting (about 32 micro inches)
and the diameter within the tolerances of commercial
steel shafting (+.000 / -.002)
6. Ambient temperature should not exceed 130F for
babbitted and 300F for bronze-bushed bearings. If
the shaft transmits heat from a source such as an
oven, the shaft temperature at the bearing should not
exceed these ambient temperatures.
7. Bearings should be protected against adverse
operating conditions.
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
PAGE B13-14
B13-10
3/23/07 3:10:37 PM
IMPERIAL - ISAF
SELECTION
Sleeve Bearings - Babbitted and Bronze-Bushed
Radial Load Ratings
(Refer To Instructions On Opposite Page)
10
100
150
180
260
280
295
415
440
585
640
875
1150
1460
1800
2190
2600
3550
4640
5870
7240
8750
10410
12200
14120
17270
18390
20750
22950
30700
50
100
150
175
255
275
290
410
430
570
625
850
1110
1400
1730
2080
2470
3330
4310
5410
6600
7900
9300
10790
12360
14950
15750
17360
18760
23190
100
100
145
175
250
265
285
400
420
555
605
820
1060
1330
1630
1950
2300
3060
3910
4830
5810
6840
7910
9020
10150
12050
10710
4140
...
...
150
95
145
170
245
260
280
390
410
535
585
785
1010
1260
1530
1820
2130
2790
3500
4250
5010
4360
2390
...
...
...
...
200
95
140
170
240
255
270
380
395
520
565
755
965
1190
1430
1690
1960
2520
2760
1410
...
Radial Load Rating in Lbs. at Various Revolutions Per Minute

250
300
350
400
450
500
95
95
95
90
90
90
140
135
135
135
130
130
165
160
160
155
155
150
235
230
225
220
215
210
250
245
240
235
225
220
265
260
250
245
240
230
370
355
345
335
325
315
385
375
360
350
340
325
505
485
470
455
435
420
545
525
500
480
460
440
720
690
655
625
590
340
915
865
815
730
335
...
1120
1050
975
410
...
...
1340
1240
645
...
...
...
1560
1150
110
...
...
...
1790
675
...
...
...
...
1200
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
600
85
125
145
200
210
220
295
305
345
205
...
...
...
...
...
...
...
...
...
...
700
85
120
140
190
200
205
245
190
...
...
...
...
...
...
...
...
...
...
...
...
800
85
115
130
180
185
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
900
80
110
125
150
105
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1000
80
110
120
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
800
150
220
255
355
375
360
360
300
195
...
...
...
...
...
...
...
...
...
...
...
900
150
215
250
325
295
255
195
115
...
...
...
...
...
...
...
...
...
...
...
...
1000
145
210
240
245
200
150
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Shaft
Sizes
1/2
5/8
3/4
7/8
15/16
1
1-1/8
1-3/16, 1-1/4
1-5/16, 1-3/8
1-7/16, 1-1/2
1-11/16, 1-3/4
1-15/16, 2
2-3/16, 2-1/4
2-7/16, 2-1/2
2-11/16, 2-3/4
2-15/16, 3
3-7/16, 3-1/2
3-15/16, 4
4-7/16, 4-1/2
4-15/16, 5
5-7/16, 5-12
5-15/16, 6
6-7/16, 6-1/2
6-15/16, 7
7-7/16, 7-1/2
7-15/16, 8
9
10
12
UNIFIED SAF
Table 1: MPTA Radial Load Ratings for Babbitted Sleeve Bearings
For speeds lower than 10 rpm consult DODGE.
10
170
250
300
435
465
495
700
735
980
1070
1470
1920
2440
3020
3660
4370
5960
7790
9860
12180
14740
17530
20560
23840
29170
31090
35150
38950
52300
50
170
250
300
430
460
490
690
730
965
1050
1440
1880
2390
2940
3560
4230
5740
7460
9400
11540
13880
16420
19150
22070
26850
28450
31760
34760
45520
FEATURES/BENEFITS
PAGE B13-2
100
165
245
295
425
455
485
680
715
950
1030
1410
1830
2320
2850
3430
4060
5470
7060
8820
10740
12820
15040
17390
19870
23950
23410
18540
2220
...
150
165
245
295
420
450
480
670
705
930
1010
1370
1790
2240
2750
3300
3890
5200
6650
8240
9950
10340
9520
7900
5350
1880
...
200
165
245
290
415
445
470
660
695
915
995
1340
1740
2170
2650
3170
3720
4930
5910
5400
4090
1820
...
...
...
...
...

250
300
350
400
450
500
165
165
160
160
160
160
240
240
235
235
235
230
285
285
280
280
275
270
410
405
400
395
390
385
435
430
425
420
415
410
465
460
450
445
440
430
650
640
630
620
605
595
680
670
660
645
635
625
895
880
865
845
830
815
975
955
935
915
895
875
1310
1280
1240
1210
1180
930
1690
1640
1590
1500
1110
715
2100
2030
1960
1390
830
265
2560
2460
1860
1090
...
...
3040
2620
1580
545
...
...
3550
2440
...
...
...
...
3610
1440
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
600
155
225
265
375
395
420
575
600
735
635
410
...
...
...
...
...
...
...
...
...
700
155
220
260
365
385
405
525
485
465
315
...
...
...
...
...
...
...
...
...
...
SLEEVOIL
Shaft
Sizes
1/2
5/8
3/4
7/8
15/16
1
1-1/8
1-3/16, 1-1/4
1-5/16, 1-3/8
1-7/16, 1-1/2
1-11/16, 1-3/4
1-15/16, 2
2-3/16, 2-1/4
2-7/16, 2-1/2
2-11/16, 2-3/4
2-15/16, 3
3-7/16, 3-1/2
3-15/16, 4
4-7/16, 4-1/2
4-15/16, 5
5-7/16, 5-1/2
5-15/16, 6
6-7/16, 6-1/2
6-15/16, 7
7-7/16, 7-1/2
7-15/16, 8
9
10
12
For speeds lower than 10 rpm consult DODGE.
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Sleeve Bearing
Table 2: MPTA Radial Load Ratings for Bronze Bushed Sleeve Bearings
PAGE B13-14
B13-11
3/23/07 3:10:38 PM
IMPERIAL - ISAF
SELECTION
Sleeve Bearings - Bronze Bushings
UNIFIED SAF
Lower half of new bushing is installed

by relieving shaft pressure, prying out
old bushing and rolling in new one.
New bushing upper half is easily dropped

into bearing cap. Grease grooves in the
top of bore offer adequate lubrication.
Bronze Bushing Sets
For Split Bronze Bushed Journal Bearings.

For Rigid Bronze Bushed Pillow Blocks.
Shaft
Size
For Angle Bronze Bushed Pillow Blocks.
Sleeve Bearing
These precision bushings are machined from quality

cast cylinders of high grade leaded bronze. They are
furnished in matched halves and sold in complete sets
only. Grease grooves are provided in the top half for
proper lubrication. Bushings are designed to be installed
in the bearings listed above without removing the shaft
or bearing base. A brass locking spool positions the
bushing preventing lateral movement or rotation. This
simple method minimizes down time and labor costs.
They are particularly suited for heavy loads, elevated
temperatures and corrosive conditions.
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
7-1/2
8
Bushings made of special alloys can be furnished where

especially difficult heat problems may arise. They will be
priced on application.
Bushing Sets
Part
No.
005055
005056
005057
005058
005059
005060
005061
005062
005063
005064
005065
005066
005067
005117
005068
Wt.
1.70
2.10
2.50
3.10
3.60
4.90
9.70
14
15
18
21
28
33
37
42
Locking
Spools*
Part
No.
005050
005051
005052
005053
For other bushing material consult DODGE

SLEEVOIL
Price is for one bushing set which includes upper

and lower half
* Order separately if desired
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
PAGE B13-14
B13-12
3/23/07 3:10:38 PM
IMPERIAL - ISAF
SELECTION
Sleeve Bearings - BRONZOIL
RADIAL LOAD RATINGS FOR BRONZOIL SLEEVE BEARINGS
Shaft
Sizes
50
100
200
500
1000
1/2
230
225
220
175
120
110
5/8
250
240
230
180
125
105
3/4
260
250
240
185
130
100
7/8
280
270
260
190
145
95
15/16
380
360
290
200
150
90
420
400
300
210
160
85
1-3/16
500
475
395
250
135
115
1-1/4
525
500
415
260
140
120
2000
2500
3000
3500
4000
1/2
90
80
60
50
45
5/8
80
65
55
45
35
3/4
70
55
50
35
...
7/8
60
50
45
...
...
15/16
55
45
40
...
...
50
40
...
...
...
1-3/16
60
...
...
...
...
1-1/4
63
...
...
...
...
BRONZOIL Take-Up Bearing Assembly

1
1/2
(TUBO--)
Assy.No.
034030
034001
405046
034013
444010
5/8
034031
034001
405046
034014
444010
Size
3/4
034032
034001
405046
034015
444010
7/8
034033
034002
405046
034016
444010
15/16
034034
034002
405046
034017
444010
034035
034002
405046
034018
444010
UNIFIED SAF
Select a bearing from the rating tables having a radial

load equal to or greater than the actual load providing
normal operating conditions are met. If these conditions
cannot be met, select a bearing for an equivalent radial
load to be obtained by multiplying the actual radial load
by a 2.0 to 4.0 service factor-depending on specific
application.
Normal Operating Conditions:

1. Adequate oil supply.
2. Proper bearing alignment for uniform distribution of
load at all operating conditions.
Sizes
Sleeve Bearing
Shaft
1500
3. No shock loading.
4. No adversely high operating conditions.
5. No moist, corrosive, or abrasive atmosphere.
6. Shaft surface finish must be equal to that of
commercial steel shafting. (About 32 micro inches)
SLEEVOIL
7. Shaft diameter tolerance within +.000/ -.002.

8. Maximum operating temperature 180F.
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
PAGE B13-14
B13-13
3/23/07 3:10:39 PM
IMPERIAL - ISAF
Sleeve Bearings - SOLIDLUBE
3/4 THRU 3 SOLIDLUBE LT PILLOW BLOCKS
A
G
F
UNIFIED SAF
M
H
D
MINIMUM
C
D
MAXIMUM
B
Series
204
205
206
207
Sleeve Bearing
209
210
211
212
SLEEVOIL
215
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
Part Number
033667
034225
033668
033669
033670
034226
033672
033673
034227
033674
033676
033677
033678
034228
033680
033681
034229
034230
033682
033683
034231
033684
033686
033687
034221
033688
033077
034232
034233
FEATURES/BENEFITS
PAGE B13-2
700 SERIES
Description
P2B-LT7-012
P2B-LT7-20M
P2B-LT7-014
P2B-LT7-015
P2B-LT7-100
P2B-LT7-25M
P2B-LT7-102
P2B-LT7-103
P2B-LT7-30M
P2B-LT7-104
P2B-LT7-106
P2B-LT7-107
P2B-LT7-108
P2B-LT7-35M
P2B-LT7-111
P2B-LT7-112
P2B-LT7-40M
P2B-LT7-45M
P2B-LT7-115
P2B-LT7-200
P2B-LT7-50M
P2B-LT7-203
P2B-LT7-207
P2B-LT7-208
P2B-LT7-60M
P2B-LT7-215
P2B-LT7-300
P2B-LT7-70M
P2B-LT7-75M
Wt.
1.70
0.77
1.60
1.50
1.40
0.64
2.80
2.70
1.22
4.20
3.90
3.80
3.70
1.77
6.00
5.80
2.72
2.63
6.80
6.60
3.08
8.00
10.10
9.80
4.58
21.20
20.90
9.98
9.62
SPECIFICATION/HTO
PAGE B13-4
Part Number
033977
034234
033978
033979
033980
034235
033982
033983
034236
033984
033986
033987
033988
034237
033990
033991
034238
034239
033992
033993
034240
033994
033996
033997
034241
033998
033974
034242
034243
1000 SERIES
Description
P2B-LT10-012
P2B-LT10-20M
P2B-LT10-014
P2B-LT10-015
P2B-LT10-100
P2B-LT10-25M
P2B-LT10-102
P2B-LT10-103
P2B-LT10-30M
P2B-LT10-104
P2B-LT10-106
P2B-LT10-107
P2B-LT10-108
P2B-LT10-35M
P2B-LT10-111
P2B-LT10-112
P2B-LT10-40M
P2B-LT10-45M
P2B-LT10-115
P2B-LT10-200
P2B-LT10-50M
P2B-LT10-203
P2B-LT10-207
P2B-LT10-208
P2B-LT10-60M
P2B-LT10-215
P2B-LT10-300
P2B-LT10-70M
P2B-LT10-75M
NOMENCLATURE
PAGE B13-5
Wt.
1.70
0.77
1.60
1.50
1.40
0.64
2.80
2.70
1.22
4.20
3.90
3.80
3.70
1.77
6.00
5.80
2.72
2.63
6.80
6.60
3.08
8.00
10.10
9.80
4.58
21.20
20.90
9.98
9.62
Used on
Frame
LD-10
LD-10
LD-10
LD-10
LD-20
LD-20
LD-20
LD-20
LD-20
LD-20
LD-30
LD-30
LD-40
LD-40
LD-40
LD-45
LD-45
SELECTION
PAGE B13-6
B13-14
sleeve_sel_dim.indd B13-14
3/23/07 3:12:08 PM
IMPERIAL - ISAF
D
Min.
3-3/8
85.7
Max.
4-3/16
106.4
F
Bolt Dia.
1-11/32
3/8
27/32
17/32
3/4
1
5-1/4
20mm
25.4
133.4
34.1
10
21.4
13.5
7/8
15/16
1-1/16
5-1/2
1-13/32 3-11/16
4-1/2
3/8
27/32
19/32
205
1
25mm
27.0
139.7
35.7
93.7
114.3
10
21.4
15.1
1-1/8
1-3/16
6-1/4
1-3/4
4-1/4
5
1/2
15/16
11/16
206
1-3/16
30mm
30.2
158.8
44.5
108.0
127.0
12
23.8
17.5
1-1/4
1-3/8
1-5/16
6-1/2
1-3/4
4-11/16
5-7/16
1/2
15/16
23/32
207
1-7/16
1-1/2
35mm
33.3
165.1
44.5
119.1
138.1
12
23.8
18.3
1-11/16
1-9/16
7-7/16
2
5-1/2
6-3/16
1/2
29/32
3/4
1-3/4
209
40mm
39.7
188.9
50.8
139.7
157.2
12
23.0
19.1
45mm
1-15/16
1-5/8
8-1/8
2-1/4
6
6-11/16
5/8
1-1/32
3/4
210
2
50mm
41.3
206.4
57.1
152.4
170.0
16
26.2
19.1
211
2-3/16
1-3/4
8-7/8
2-5/16
6-3/8
7-7/16
5/8
1-7/32
7/8
2-7/16
1-13/16
9-1/2
2-3/8
6-7/8
7-15/16
5/8
1-7/32
7/8
212
2-1/2
60mm
46.0
241.3
60.3
174.6
201.6
16
31.0
22.2
2-15/16
2-23/32
11-3/4
2-7/8
8-1/2
9-1/2
7/8
1-7/16
1
3
215
70mm
69.1
298.5
73.0
215.9
241.3
22
36.5
25.4
75mm
All Dimensions Are In Millimeters Unless Otherwise Specied
The LT and LTB Pillow Blocks Are Identical Except the LTB Pillow Blocks Have Lower Backing Dimensions
204
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
2-9/16
65.1
1-3/8
34.9
1-5/16
33.3
2-25/32
1-9/16
1-7/16
70.6
39.7
36.5
3-1/4
1-13/16
1-5/8
82.6
46.0
41.3
3-3/4
2-1/8
1-7/8
95.3
54.0
47.6
4-9/32
2-9/16
2-1/8
108.7
65.1
54.0
4-17/32
2-13/16
2-1/4
115.1
4-31/32
71.4
3-1/8
57.2
2-1/2
5-13/32
3-1/2
2-3/4
137.3
88.9
69.9
6-3/4
3-15/16
3-1/2
171.5
100.0
88.9
Sleeve Bearing
Shaft
Size
SLEEVOIL
Series
UNIFIED SAF
3/4 THRU 3 SOLIDLUBE LT PILLOW BLOCKS
SELECTION
PAGE B13-6
B13-15
3/23/07 3:12:08 PM
IMPERIAL - ISAF
3/4 THRU 3 SOLIDLUBE LTB PILLOW BLOCKS
A
G
F
UNIFIED SAF
M
H
D
MINIMUM
D
MAXIMUM
B
Series
204
205
206
207
Sleeve Bearing
209
210
211
212
SLEEVOIL
215
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
Part No.
032940
034244
032941
032942
032943
034245
032945
032946
034246
032947
032949
032950
032951
034247
032953
032954
034248
034249
032955
032956
034250
032957
032959
032960
034251
034596
034597
....
....
FEATURES/BENEFITS
PAGE B13-2
700 SERIES
Description
P2B-LTB7-012
P2B-LTB7-20M
P2B-LTB7-014
P2B-LTB7-015
P2B-LTB7-100
P2B-LTB7-25M
P2B-LTB7-102
P2B-LTB7-103
P2B-LTB7-30M
P2B-LTB7-104
P2B-LTB7-106
P2B-LTB7-107
P2B-LTB7-108
P2B-LTB7-35M
P2B-LTB7-111
P2B-LTB7-112
P2B-LTB7-40M
P2B-LTB7-45M
P2B-LT87-115
P2B-LTB7-200
P2B-LTB7-50M
P2B-LTB7-203
P2B-LTB7-207
P2B-LTB7-208
P2B-LTB7-60M
P2B-LTB7-215
P2B-LTB7-300
....
....
Wt.
1.6
0.73
1.5
1.4
1.3
0.59
2.7
2.6
1.18
4
3.8
3.7
3.6
1.72
5
4.8
2.27
2.18
6
5.8
2.72
6.5
8.1
7.8
3.67
18.7
18.4
....
....
SPECIFICATION/HTO
PAGE B13-4
Part No.
032970
034252
032971
032972
032973
034253
032975
032976
034254
032977
032979
032980
032981
034255
032983
032984
034256
034257
032985
032986
034258
032987
032989
032990
034259
034598
034599
....
....
1000 SERIES
Description
P2B-LTB10-012
P2B-LTB10-20M
P2B-LTB10-014
P2B-LTB10-015
P2B-LTB10-100
P2B-LTB10-25M
P2B-LTB10-102
P2B-LTB10-103
P2B-LTB10-30M
P2B-LTB10-104
P2B-LTB10-106
P2B-LTB10-107
P2B-LTB10-108
P2B-LTB10-35M
P2B-LTB10-111
P2B-LTB10-112
P2B-LTB10-40M
P2B-LTB10-45M
P2B-LTB10-115
P2B-LTB10-200
P2B-LTB10-50M
P2B-LTB10-203
P2B-LTB10-207
P2B-LTB10-208
P2B-LTB10-60M
P2B-LTB10-215
P2B-LTB10-300
....
....
NOMENCLATURE
PAGE B13-5
Wt.
1.6
0.73
1.5
1.4
1.3
0.59
2.7
2.6
1.18
4
3.8
3.7
3.6
1.72
5
4.8
2.27
2.18
6
5.8
2.72
6.5
8.1
7.8
3.67
18.7
18.4
....
....
Used on
Frame
LD-10
LD-10
LD-10
LD-10
LD-20
LD-20
LD-20
LD-20
LD-20
LD-20
LD-30
LD-30
LD-40
LD-40
LD-40
LD-45
LD-45
SELECTION
PAGE B13-6
B13-16
3/23/07 3:12:09 PM
IMPERIAL - ISAF
D
Min.
3-3/8
85.7
Max.
4-3/16
106.4
F
Bolt Dia.
3/4
1
5-1/4
1-11/32
3/8
27/32
15/32
20mm
25.4
133.4
34.1
10
21.4
11.9
7/8
15/16
1-1/16
5-1/2
1-13/32 3-11/16
4-1/2
3/8
27/32
15/32
205
1
25mm
27.0
139.7
35.7
93.7
114.3
10
21.4
11.9
1-1/8
1-3/16
6-1/4
1-3/4
4-1/4
5
1/2
15/16
5/8
206
1-3/16
30mm
30.2
158.8
44.5
108.0
127.0
12
23.8
15.9
1-1/4
1-3/8
1-5/16
6-1/2
1-3/4
4-11/16
5-7/16
1/2
15/16
21/32
207
1-7/16
1-1/2
35mm
33.3
165.1
44.5
119.1
138.1
12
23.8
16.7
1-11/16
1-9/16
7-7/16
2
5-1/2
6-3/16
1/2
29/32
11/16
1-3/4
209
40mm
39.7
188.9
50.8
139.7
157.2
12
23.0
17.5
45mm
1-15/16
1-5/8
8-1/8
2-1/4
6
6-11/16
5/8
1-1/32
11/16
210
2
50mm
41.3
206.4
57.1
152.4
170.0
16
26.2
17.5
211
2-3/16
1-3/4
8-7/8
2-5/16
6-3/8
7-7/16
5/8
1-7/32
13/16
2-7/16
1-13/16
9-1/2
2-3/8
6-7/8
7-15/16
5/8
1-7/32
13/16
212
2-1/2
60mm
46.0
241.3
60.3
174.6
201.6
16
31.0
20.6
2-15/16
2-23/32
11-3/4
2-7/8
8-1/2
9-1/2
7/8
1-7/16
1-1/16
3
215
70mm
69.1
298.5
73.0
215.9
241.3
22
36.5
....
75mm
All Dimensions Are In Millimeters Unless Otherwise Specied
The LT and LTB Pillow Blocks are Identical Except the LTB Pillow Blocks Have Lower backing Dimensions.
204
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
2-1/2
63.5
1-3/8
34.9
1-1/4
31.8
2-21/32
1-9/16
1-5/16
67.5
39.7
33.3
3-3/16
1-13/16
1-9/16
81.0
46.0
39.7
3-11/16
2-1/8
1-13/16
93.7
54.0
46.0
4-7/32
2-9/16
2-1/16
107.2
65.1
52.4
4-15/32
2-13/16
2-3/16
113.5
4-29/32
71.4
3-1/8
55.6
2-7/16
5-11/32
3-1/2
2-11/16
135.7
88.9
68.3
6-9/16
3-15/16
3-5/16
....
100.0
....
Sleeve Bearing
Shaft
SLEEVOIL
Series
Size
UNIFIED SAF
3/4 THRU 3 SOLIDLUBE LTB PILLOW BLOCKS
SELECTION
PAGE B13-6
B13-17
3/23/07 3:12:09 PM
IMPERIAL - ISAF
3-7/16 THRU 5 SOLIDLUBE MM PILLOW BLOCKS
P
UNIFIED SAF
J
L
G
M
D (MIN.-MAX.)
Shaft
Size
Sleeve Bearing
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Shaft
Size
SLEEVOIL
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Part No.
033247
033251
033475
033485
033500
033510
033525
033535
700 Series
Description
P2B-MM7-307
P2B-MM7-308
P2B-MM7-315
P2B-MM7-400
P2B-MM7-407
P2B-MM7-408
P4B-MM7-415
P4B-MM7-500
Part No.
033347
033351
033480
033490
033505
033515
033530
033540
1000 Series
Description
P2B-MM10-307
P2B-MM10-308
P2B-MM10-315
P2B-MM10-400
P2B-MM10-407
P2B-MM10-408
P4B-MM10-415
P4B-MM10-500
4 Bolt Base
F Bolt
E
Dia.
Min.
Max.
2 Bolt Base
F Bolt
Dia.
9-1/4
10-1/4
5/8
...
9-7/8
11-1/2
3/4
12-13/16
13-13/16
13-1/8
14-3/4
Wt.
23.00
22.80
36.00
35.80
60.00
59.70
92.00
91.50
Used On
Frame
HD-250
3-1/2
12
2-13/16
HD-300
13-7/16
3-3/16
HD-350
4-1/2
16
3-7/16
HD-400
17-7/16
4-3/4
...
1-1/4
1-3/4
4-7/8
3-1/4
7- 1/4
...
...
1-11/16
7-15/16
5-5/8
3-3/4
8-3/16
7/8
...
...
1-1/2
2-1/4
9-7/16
6-15/16
4-1/2
10
...
3/4
1-11/16
2-3/4
10-1/2
7-9/16
10-5/8
No Published Metric Dimensions For This Product

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-18
3/23/07 3:12:09 PM
IMPERIAL - ISAF
3-7/16 THRU 5 SOLIDLUBE MM 4-BOLT FLANGE BEARINGS
F
UNIFIED SAF
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Part No.
033868
033931
033899
033932
033933
033934
033869
033867
1000 Series
Description
F4B-MM10-307
F4B-MM10-308
F4B-MM10-315
F4B-MM10-400
F4B-MM10-407
F4B-MM10-408
F4B-MM10-415
F4B-MM10-500
Wt.
17.00
18.00
26.00
42.00
62.00
3-1/2
7-5/8
2-59/64
3/16
5/8
8-9/16
5/8
4- 7/8
8-7/8
3-11/32
6-7/8
1/4
3/4
9-1/2
11/16
5- 5/8
4-1/2
10-1/4
3-23/32
8-1/8
1/4
7/8
11-3/8
3/4
6-15/16
11-7/16
4- 5/8
9-3/16
1/8
12-7/8
13/16
7- 9/16
Sleeve Bearing
Shaft
Size
3-7/16
700 Series
Description
F4B-MM7-307
F4B-MM7-308
F4B-MM7-315
F4B-MM7-400
F4B-MM7-407
F4B-MM7-408
F4B-MM7-415
F4B-MM7-500
SLEEVOIL
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Part No.
033323
033321
032923
032937
033862
033863
033929
033930
Shaft
Size

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-19
3/23/07 3:12:09 PM
IMPERIAL - ISAF
3/4 THRU 2 SOLIDLUBE LT 2-BOLT FLANGE BEARING
M
C
N
A
UNIFIED SAF
H
Series
204
205
Sleeve Bearing
206
207
209
SLEEVOIL
210
Shaft
Size
700 Series
1000 Series
Part No.
Description
Wt.
Part No.
Description
3/4
033085
F2B-LT7-012
1.2
033185
F2B-LT10-012
1.2
20mm
034260
F2B-LT7-20M
0.54
034266
F2B-LT10-20M
0.54
7/8
033086
F2B-LT7-014
1.7
033186
F2B-LT10-014
1.7
15/16
033087
F2B-LT7-015
1.6
033187
F2B-LT10-015
1.6
033088
F2B-LT7-100
1.5
033188
F2B-LT10-100
1.5
25mm
034261
F2B-LT7-25M
0.68
034267
F2B-LT10-25M
0.68
1-1/8
033089
F2B-LT7-102
2.2
033189
F2B-LT10-102
2.2
1-3/16
033090
F2B-LT7-103
2.1
033190
F2B-LT10-103
2.1
30mm
034262
F2B-LT7-30M
0.95
034268
F2B-LT10-30M
0.95
1-1/4
033091
F2B-LT7-104
3.6
033191
F2B-LT10-104
3.6
1-3/8
033092
F2B-LT7-106
3.3
033192
F2B-LT10-106
3.3
1-7/16
033093
F2B-LT7-107
3.2
033193
F2B-LT10-107
3.2
1-1/2
033094
F2B-LT7-108
3.1
033194
F2B-LTI0-108
3.1
35mm
034263
F2B-LT7-35M
1.5
034269
F2B-LT10-35M
1.5
1-11/16
033095
F2B-LT7-111
4.9
033195
F2B-LT10-111
4.9
1-3/4
033096
F2B-LT7-112
4.7
033196
F2B-LT10-112
4.7
40mm
034218
F2B-LT7-40M
2.22
034270
F2B-LT10-40M
2.22
45mm
034264
F2B-LT7-45M
2.13
034271
F2B-LT10-45M
2.13
1-15/16
033097
F2B-LT7-115
5.4
033197
F2B-LT10-115
5.4
033098
F2B-LT7-200
5.2
033198
F2B-LT10-200
5.2
50mm
034265
F2B-LT7-50M
2.36
034272
F2B-LT10-50M
2.36
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Wt.
SELECTION
PAGE B13-6
B13-20
3/23/07 3:12:09 PM
IMPERIAL - ISAF
Series
204
Shaft
Size
Bolt
Dia.
3/4
29/32
4-13/16
1-1/8
3-17/32
3/8
1/2
5/32
1-3/8
2-3/8
1-1/2
20mm
23.0
122.2
28.6
89.7
3/8
12.7
4.0
34.9
60.3
38.1
63/64
4-7/8
1-1/8
3-57/64
7/16
1/2
5/32
1-9/16
2-3/4
1-7/16
25.4
123.8
28.6
98.8
7/16
12.7
4.0
39.7
69.9
36.5
1-7/64
5-9/16
1-7/32
4-19/32
7/16
1/2
5/32
1-13/16
3-1/8
1-9/16
28.2
141.3
31.0
116.7
7/16
12.7
4.0
46.0
79.4
39.7
1-7/32
6-1/8
1-3/8
5-1/8
1/2
9/16
5/32
2-1/8
3-3/4
1-27/32
31.0
155.6
34.9
130.2
1/2
14.3
4.0
54.0
95.3
46.8
1-21/64
7-1/I6
1-19/32
5-27/32
1/2
5/8
3/16
2-9/16
4-3/8
1-29/32
33.7
179.4
40.5
148.4
1/2
15.9
4.8
65.1
111.1
48.4
1-13/32
7-7/16
1-21/32
6-3/16
1/2
5/8
3/16
2-13/16
4-9/32
2-1/32
35.7
188.9
42.1
157.2
1/2
15.9
4.8
71.4
108.7
51.6
UNIFIED SAF
7/8
15/16
1
25mm
1-1/8
206
1-3/16
30mm
1-1/4
1-3/8
207
1-7/16
Sleeve Bearing
205
35mm
1-11/16
209
1-3/4
40mm
45mm
1-15/16
210
2
50mm
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SLEEVOIL
1-1/2
SELECTION
PAGE B13-6
B13-21
3/23/07 3:12:09 PM
IMPERIAL - ISAF
B
UNIFIED SAF
J
H
Shaft
Size
Series
204
205
206
207
Sleeve Bearing
209
210
211
212
SLEEVOIL
215
700 Series
1000 Series
Part No.
Description
Wt.
Part No.
Description
Wt.
3/4
033260
F4B-LT7-012
1.5
033200
F4B-LT10-012
1.5
20mm
034273
F4B-LT7-20M
0.68
034283
F4B-LT10-20M
0.6
7/8
033261
F4B-LT7-014
2.2
033201
F4B-LT10-014
2.2
15/16
033262
F4B-LT7-015
2.1
033202
F4B-LT10-015
2.1
033263
F4B-LT7-100
033203
F4B-LT10-100
25mm
034274
F4B-LT7-25M
0.91
034284
F4B-LT10-25M
0.91
2.9
1-1/8
033264
F4B-LT7-102
2.9
033204
F4B-LT10-102
1-3/16
033265
F4B-LT7-103
2.8
033205
F4B-LT10-103
2.8
30mm
034275
F4B-LT7-30M
1.27
034285
F4B-LT10-30M
1.27
1-1/4
033266
F4B-LT7-104
4.3
033206
F4B-LT10-104
4.3
1-3/8
033267
F4B-LT7-106
033207
F4B-LT10-106
1-7/16
033268
F4B-LT7-107
3.9
033208
F4B-LT10-107
3.9
1-1/2
033269
F4B-LT7-108
3.8
033209
F4B-LT10-108
3.8
35mm
034276
F4B-LT7-35M
1.81
034286
F4B-LT10-35M
1.81
1-11/16
033270
F4B-LT7-111
5.8
033210
F4B-LT10-111
5.8
1-3/4
033271
F4B-LT7-I12
5.6
033211
F4B-LT10-112
5.6
40mm
034277
F4B-LT7-40M
2.63
034287
F4B-LT10-40M
2.63
45mm
034278
F4B-LT7-45M
2.54
034288
F4B-LT10-45M
2.54
1-15/16
033272
F4B-LT7-115
6.8
033212
F4B-LT10-115
6.8
033273
F4B-LT7-200
6.6
033213
F4B-LT10-200
6.6
50mm
034279
F4B-LT7-50M
034289
F4B-LT10-50M
2-3/16
033274
F4B-LT7-203
8.5
033214
F4B-LT10-203
8.5
2-7/16
033275
F4B-LT7-207
11
033215
F4B-LT10-207
11
2-1/2
033276
F4B-LT7-208
10.8
033216
F4B-LT10-208
10.8
60mm
034280
F4B-LT7-60M
034290
F4B-LT10-60M
2-15/16
033277
F4B-LT7-215
18
033217
F4B-LT10-215
18
033278
F4B-LT7-300
17.7
033218
F4B-LT10-300
17.7
70mm
034281
F4B-LT7-70M
8.16
034291
F4B-LT10-70M
8.16
75mm
034282
F4B-LT7-75M
8.03
034292
F4B-LT10-75M
8.03
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-22
3/23/07 3:12:10 PM
IMPERIAL - ISAF
UNIFIED SAF
Series
204
Shaft
Size
3/4
2-1/2
F
Bolt
3/8
29/32
3-3/8
1-1/8
20mm
23.0
85.7
28.6
7/16
5/32
1-3/8
63.5
10.0
11.1
3.2
34.9
63/64
3-3/4
1-1/8
2-3/4
7/16
1/2
3/16
1-9/16
25.4
95.2
28.6
69.9
10.0
12.7
4.8
39.7
31/32
4-1/4
1-7/32
3-1/4
7/16
1/2
5/32
1-13/16
28.2
108.0
31.0
82.6
10.0
12.7
4.0
46.0
1-7/32
4-3/4
1-3/8
3-5/8
1/2
9/16
5/32
2-1/8
31.0
120.7
34.9
92.1
12.0
14.3
4.0
54.0
1-11/32
5-3/8
1-19/32
4-1/8
1/2
5/8
13/64
2-9/16
33.7
136.5
40.5
104.8
12.0
15.9
4.8
65.1
1-13/32
5-5/8
1-21/32
4-3/8
1/2
5/8
7/32
2-13/16
50mm
35.7
142.9
42.1
111.1
12.0
15.9
4.8
71.4
2-3/16
1-17/32
6-1/2
1-25/32
5-1/8
5/8
11/16
7/32
3-1/8
1-15/32
1-31/32
5-5/8
5/8
11/16
11/64
3-1/2
41.3
177.8
47.6
142.9
16.0
17.5
4.0
88.9
2-23/32
7-3/4
2-3/4
3/4
17/32
3-15/16
61.1
196.9
70.6
152.4
18.0
25.4
13.5
100.0
205
15/16
1
25mm
1-1/8
206
1-3/16
30mm
1-1/4
1-3/8
207
1-7/16
7/8
1-11/16
209
1-3/4
40mm
45mm
1-15/16
210
211
2-7/16
212
2-1/2
60mm
2-15/16
215
3
70mm
75mm
SLEEVOIL
35mm
Sleeve Bearing
1-1/2
All Dimensions Are in Millimeters Unless Otherwise Specied.

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-23
3/23/07 3:12:10 PM
IMPERIAL - ISAF
3/4 THRU 2-1/2 SOLIDLUBE LT NARROW SLOT TAKE-UP BEARINGS
UNIFIED SAF
Series
204
205
206
Sleeve Bearing
207
209
210
SLEEVOIL
211
212
Shaft
Size
LT700
Part No.
Description
LT1000
Wt.
Part No.
Description
Wt.
Used
on Frame
3/4
033810
NSTU-LT7-012
1.7
033840
NSTU-LT10-012
1.7
NS-210
20mm
034293
NSTU-LT7-20M
0.77
034303
NSTU-LT10-20M
0.77
WS-300
7/8
033811
NSTU-LT7-014
1.9
033841
NSTU-LT10-014
1.9
15/16
033812
NSTU-LT7-015
1.8
033842
NSTU-LT10-015
1.8
033813
NSTU-LT7-100
1.7
033843
NSTU-LT10-100
1.7
25mm
034294
NSTU-LT7-25M
0.77
034304
NSTU-LT10-25M
0.77
1-1/8
033814
NSTU-LT7-102
2.8
033844
NSTU-LT10-102
2.8
1-3/16
033815
NSTU-LT7-103
2.7
033845
NSTU-LT10-103
2.7
30mm
034295
NSTU-LT7-30M
1.22
034305
NSTU-LT10-30M
1.22
1-1/4
033816
NSTU-LT7-104
3.2
033846
NSTU-LT10-104
3.2
1-3/8
033817
NSTU-LT7-106
3.0
033847
NSTU-LT10-106
3.0
1-7/16
033818
NSTU-LT7-107
2.9
033848
NSTU-LT10-107
2.9
NS-210
WS-300
NS-308
WS-308
NS-308
1-1/2
033819
NSTU-LT7-108
2.8
033849
NSTU-LT10-108
2.8
35mm
034296
NSTU-LT7-35M
1.36
034306
NSTU-LT10-35M
1.36
1-11/16
033820
NSTU-LT7-111
4.9
033850
NSTU-LT10-111
4.9
1- 3/4
033821
NSTU-LT7-112
4.8
033851
NSTU-LT10-112
4.8
40mm
034297
NSTU-LT7-40M
2.22
034307
NSTU-LT10-40M
2.22
45mm
034298
NSTU-LT7-45M
2.18
034308
NSTU-LT10-45M
2.18
1-15/16
033822
NSTU-LT7-115
5.5
033852
NSTU-LT10-115
5.5
033823
NSTU-LT7-200
5.3
033853
NSTU-LT10-200
5.3
50mm
034299
NSTU-LT7-50M
2.4
034309
NSTU-LT10-50M
2.4
WS-400
2-3/16
033824
NSTU-LT7-203
6.7
033854
NSTU-LT10-203
6.7
NS-407
2-7/16
033825
NSTU-LT7-207
7.4
033855
NSTU-LT10-207
7.4
2-1/2
033826
NSTU-LT7-208
7.0
033856
NSTU-LT10-208
7.0
60mm
034300
NSTU-LT7-60M
3.18
034310
NSTU-LT10-60M
3.18
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
WS-308
NS-400
WS-400
NS-400
NS-415
WS-502
SELECTION
PAGE B13-6
B13-24
3/23/07 3:12:10 PM
3/4 THRU 2-1/2 SOLIDLUBE LT NARROW SLOT TAKE-UP BEARINGS
205
20mm
7/8, 15/16, 1
25mm
1-1/8
206
1-3/16
30mm
1-1/4, 1-3/8,
207
1-7/16, 1-1/2
35mm
1-11/16, 1-3/4
209
40mm
45mm
210
211
212
1-15/16, 2
50mm
2-3/16
2-7/16, 2-1/2
60mm
Series
204
205
Shaft Size
3/4
7/16
25.4
88.9
6.4
38.1
55.6
3/4
11.1
1-1/16
3-9/16
1/4
1-1/2
2-3/16
3/4
7/16
27
90.5
6.4
38.1
55.6
3/4
11.1
1-3/16
4-5/16
1/4
2-1/2
2-11/16
3/4
7/16
30.2
109.5
6.4
63.5
68.3
3/4
11.1
1-5/16
4-1/2
1/4
2-1/2
2-11/16
3/4
7/16
33.3
114.3
6.4
63.5
68.3
3/4
11.1
1- 9/16
5- 7/16
5/16
3-1/4
7/8
1/2
39.7
138.1
7.9
76.2
82.6
7/8
12.7
1- 5/8
5- 1/2
5/16
3-1/4
7/8
1/2
41.3
139.7
7.9
76.2
82.6
7/8
12.7
1- 3/4
6- 1/8
5/16
3-1/2
3-5/8
19/32
1-13/16
6-11/16
5/16
3-3/4
3-7/8
19/32
46
169.9
7.9
95.3
95.3
15.1
1-3/8
2-5/8
3-1/8
5/16
20mm
22.2
34.9
34.9
66.7
79.4
5/16
7/8, 15/16, 1
7/8
1-3/8
1-9/16
2-5/8
3-1/8
5/16
25mm
22.2
34.9
39.7
66.7
79.4
5/16
15/16
1-3/8
1-13/16
3-1/2
4-1/8
5/16
23.8
34.9
46.0
88.9
104.8
5/16
15/16
1-3/8
2-1/8
3-1/2
4-1/8
5/16
1-3/16
1-7/16, 1-1/2
P Pin Dia.
23.8
34.9
54.0
88.9
104.8
5/16
1-7/32
1-5/8
2-9/16
4-3/4
3/8
31.0
41.3
65.1
101.6
120.7
3/8
1-3/32
1-5/8
2-13/16
4-3/4
3/8
27.8
41.3
71.4
101.6
120.7
3/8
2-3/16
1-9/32
1-5/8
3- 1/2
4-15/16
5-3/4
7/16
2-7/16, 2-1/2
1-9/32
1-3/4
3-1/8
4-7/16
5-3/8
7/16
32.5
41.3
88.9
125.4
146.1
7/16
40mm
45mm
212
F Screw Dia.
2-3/16
35mm
211
1-1/2
1-3/8
1-11/16, 1-3/4
210
1/4
30mm
209
3-1/2
7/8
1-1/4, 1-3/8,
207
3/4
1-1/8
206
1-15/16, 2
50mm
60mm
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Sleeve Bearing
204
Shaft Size
3/4
SLEEVOIL
Series
UNIFIED SAF
IMPERIAL - ISAF
SELECTION
PAGE B13-6
B13-25
3/23/07 3:12:10 PM
IMPERIAL - ISAF
3/4 THRU 3 SOLIDLUBE LT WIDE SLOT TAKE-UP BEARINGS
T
D
N
M
UNIFIED SAF
H
C
G
E
Series
204
205
206
207
Sleeve Bearing
209
210
211
212
SLEEVOIL
215
Shaft
Size
LT700
Part No.
Description
LT1000
Wt.
Part No.
Description
Wt.
Used on
Frame
3/4
033870
WSTU-LT7-012
2.4
033910
WSTU-LT10-012
2.4
WS-300
20mm
034313
WSTU-LT7-20M
1.09
034323
WSTU-LT10-20M
1.09
WS-300
7/8
033871
WSTU-LT7-014
2.6
033911
WSTU-LT10-014
2.6
15/16
033872
WSTU-LT7-015
2.5
033912
WSTU-LT10-015
2.5
033873
WSTU-LT7-100
2.4
033913
WSTU-LT10-100
2.4
25mm
034314
WSTU-LT7-25M
1.09
034324
WSTU-LT10-25M
1.09
1-1/8
033874
WSTU-LT7-102
3.2
033914
WSTU-LT10-102
3.2
1-3/16
033875
WSTU-LT7-103
3.1
033915
WSTU-LT10-103
3.1
30mm
034315
WSTU-LT7-30M
1.41
034325
WSTU-LT10-30M
1.41
1-1/4
033876
WSTU-LT7-104
4.2
033916
WSTU-LT10-104
4.2
1-3/8
033877
WSTU-LT7-106
3.9
033917
WSTU-LT10-106
3.9
1-7/16
033878
WSTU-LT7-107
3.8
033918
WSTU-LT10-107
3.8
1-1/2
033879
WSTU-LT7-108
3.7
033919
WSTU-LT10-108
3.7
35mm
034316
WSTU-LT7-35M
1.77
034326
WSTU-LT10-35M
1.77
1-11/16
033880
WSTU-LT7-111
6.1
033920
WSTU-LT10-111
6.1
1- 3/4
033881
WSTU-LT7-112
033921
WSTU-LT10-112
40mm
034317
WSTU-LT7-40M
2.77
034327
WSTU-LT10-40M
2.77
45mm
034318
WSTU-LT7-45M
2.72
034328
WSTU-LT10-45M
2.72
1-15/16
033882
WSTU-LT7-115
6.7
033922
WSTU-LT10-115
6.7
033883
WSTU-LT7-200
6.5
033923
WSTU-LT10-200
6.5
50mm
034319
WSTU-LT7-50M
2.95
034329
WSTU-LT10-50M
2.95
WS-400
2-3/16
033884
WSTU-LT7-203
9.8
033924
WSTU-LT10-203
9.8
WS-502
2-7/16
033885
WSTU-LT7-207
10.1
033925
WSTU-LT10-207
10.1
2-1/2
033886
WSTU-LT7-208
9.8
033926
WSTU-LT10-208
9.8
60mm
034320
WSTU-LT7-60M
4.58
034330
WSTU-LT10-60M
4.58
2-15/16
033887
WSTU-LT7-215
13
033927
WSTU-LT10-215
13
033888
WSTU-LT7-300
12.5
033928
WSTU-LT10-300
12.5
70mm
034321
WSTU-LT7-70M
5.9
034331
WSTU-LT10-70M
5.9
75mm
034322
WSTU-LT7-75M
5.67
034332
WSTU-LT10-75M
5.67
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
WS-300
WS-300
WS-308
WS-308
WS-308
WS-308
WS-400
WS-400
WS-400
WS-502
WS-502
WS-515
WS-515
SELECTION
PAGE B13-6
B13-26
3/23/07 3:12:10 PM
204
205
206
Shaft Size
3/4
20mm
7/8, 15/16, 1
25mm
1-1/8, 1-3/16
30mm
1-1/4, 1-3/8
207
1-7/16, 1-1/2
35mm
209
210
211
212
215
205
206
209
210
211
212
215
F Dia.
3-11/16
17/32
2-3/8
3/4
3/8
25.4
93.7
13.5
50.8
60.3
3/4
9.5
1-1/16
3-13/16
17/32
2-7/16
13/16
3/8
27.0
96.8
13.5
50.8
61.9
13/16
9.5
1- 3/16
4- 3/8
17/32
2-1/4
2-3/4
7/8
3/8
30.2
111.1
13.5
57.2
69.9
7/8
9.5
1- 5/16
4- 7/8
17/32
2-1/2
3-1/16
7/8
1/2
23.7
33.3
123.8
13.5
63.5
77.8
7/8
1- 9/16
5- 5/8
11/16
3-1/4
3-7/16
1-1/8
5/8
40mm, 45mm
39.7
142.9
17.5
82.6
87.3
1-1/8
15.9
1-15/16, 2
1-5/8
5-13/16
11/16
3-3/8
3-9/16
1-1/8
5/8
50mm
41.3
147.6
17.5
85.7
90.5
1-1/8
15.9
2-3/16
2-7/16, 2-1/2
60mm
2-15/16, 3
70mm, 75mm
Shaft Size
1-3/4
6-11/16
1-1/16
3-3/4
4-3/16
1-3/8
3/4
1-13/16
7-1/2
1-1/16
4-11/16
1-3/8
3/4
46.0
190.5
27.0
101.6
119.1
1-3/8
19.1
2-23/32
9-1/8
1-1/16
4-3/4
5-1/2
1-9/16
13/16
69.1
231.8
27.0
120.7
139.7
1-9/16
20.6
3/4
5/8
1-1/4
1-3/8
3-5/8
1-3/8
20mm
15.9
50.8
31.8
34.9
76.2
92.1
34.9
7/8, 15/16, 1
5/8
1-5/16
1-9/16
3-5/8
1-3/8
25mm
15.9
50.8
33.3
39.7
76.2
92.1
34.9
1-1/8, 1-3/16
5/8
2-3/16
1-7/16
1-13/16
3-1/2
4-1/8
1-5/8
30mm
15.9
55.6
36.5
46.0
88.9
104.8
41.3
5/8
2-1/2
1-7/16
2-1/8
3-1/2
4-1/8
1-5/8
1-1/4, 1-3/8
207
1-11/16,1-3/4
Series
204
1-7/16, 1-1/2
35mm
15.9
63.5
36.5
54.0
88.9
104.8
41.3
1-11/16,1-3/4
3/4
3-1/4
1-15/16
2-9/16
4-3/4
1-15/16
40mm, 45mm
19.1
82.6
49.2
65.1
101.6
120.7
49.2
1-15/16, 2
3/4
3-1/4
1-15/16
2-13/16
4-3/4
1-15/16
50mm
19.1
82.6
49.2
71.4
101.6
120.7
49.2
2-3/16
2-1/2
3-1/8
5-1/8
5-7/8
2-1/2
2-1/2
2-7/16, 2-1/2
1-1/4
2-1/2
3-1/2
5-1/8
5-7/8
60mm
31.8
101.6
63.5
88.9
130.2
149.2
63.5
2-15/16, 3
1-1/4
4-3/8
2-3/4
3-15/16
5-15/16
6-11/16
2-3/4
70mm, 75mm
31.8
111.1
69.9
100.0
150.8
169.9
69.9
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Series
Sleeve Bearing
3/4 THRU 3 SOLIDLUBE LT WIDE SLOT TAKE-UP BEARINGS
SLEEVOIL
UNIFIED SAF
IMPERIAL - ISAF
SELECTION
PAGE B13-6
B13-27
3/23/07 3:12:11 PM
IMPERIAL - ISAF
1-15/16 THRU 3 TYPE GLT SOLIDLUBE TAKE-UP BEARINGS
UNIFIED SAF
700 Series
1000 Series
Sleeve Bearing
Shaft
Size
Part No.
Description
Part No.
Description
1-15/16
033739
TP-GLT7-115
033750
TP-GLT10-115
033740
TP-GLT7-200
033751
TP-GLT10-200
2-3/16
033741
TP-GLT7-203
033752
TP-GLT10-203
2-7/16
033742
TP-GLT7-207
033753
TP-GLT10-207
2-1/2
033743
TP-GLT7-208
033754
TP-GLT10-208
2-15/16
033744
TP-GLT7-215
033755
TP-GLT10-215
033745
TP-GLT7-300
033756
TP-GLT10-300
Wt.
Frame Size
10.1
TP10
11.8
TP20
14.1
TP30
17.0
TP40
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-28
3/23/07 3:12:11 PM
IMPERIAL - ISAF
Shaft
Size
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
1-5/8
6-1/2
2-3/8
3-1/4
6-3/8
2-13/16
2-3/8
1-3/4
2-1/2
6-3/4
3-3/8
6-7/8
3-1/8
2-3/8
1-13/16
7-1/2
2-3/4
3-1/2
7-7/16
3-1/2
2-3/4
2-23/32
8-1/2
2-1/2
8-5/16
3-15/16
2-3/4
SLEEVOIL
Sleeve Bearing
UNIFIED SAF
1-15/16 THRU 3 TYPE GLT SOLIDLUBE TAKE-UP BEARINGS
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-29
3/23/07 3:12:11 PM
IMPERIAL - ISAF
3/4 THRU 3 SOLIDLUBE LT INSERTS
UNIFIED SAF
Series
204
205
206
207
Sleeve Bearing
209
210
211
212
SLEEVOIL
215
3/4
033585
700 Series
LT700 Series
Description
INS-LT7-012
0.30
033610
1000 Series
LT1000 Series
Description
INS-LT10-012
20mm
034454
INS-LT7-20M
0.14
034455
INS-LT10-20M
0.14
7/8
033586
INS-LT7-014
0.50
033611
INS-LT10-014
0.50
15/16
033587
INS-LT7-015
0.40
033612
INS-LT10-015
0.40
033588
INS-LT7-100
0.30
033613
INS-LT10-100
0.30
25mm
034456
INS-LT7-25M
0.14
034457
INS-LT10-25M
0.14
1-1/8
033589
INS-LT7-102
0.70
033614
INS-LT10-102
0.70
1-3/16
033590
INS-LT7-103
0.60
033615
INS-LT10-103
0.60
30mm
034458
INS-LT7-30M
0.32
034459
INS-LT10-30M
0.32
1-1/4
033591
INS-LT7-104
1.20
033616
INS-LT10-104
1.20
1-3/8
033592
INS-LT7-106
1.00
033617
INS-LT10-106
1.00
1-7/16
033593
INS-LT7-107
0.90
033618
INS-LT10-107
0.90
1-1/2
033594
INS-LT7-108
0.80
033619
INS-LT10-108
0.80
35mm
034460
INS-LT7-35M
0.45
034461
INS-LT10-35M
0.45
1-11/16
033595
INS-LT7-111
1.60
033620
INS-LT10-111
1.60
1-3/4
033596
INS-LT7-112
1.40
033621
INS-LT10-112
1.40
40mm
034462
INS-LT7-40M
0.73
034463
INS-LT10-40M
0.73
45mm
034464
INS-LT7-45M
0.64
034465
INS-LT10-45M
0.64
1-15/16
033597
INS-LT7-115
1.80
033622
INS-LT10-115
1.80
033598
INS-LT7-200
1.60
033623
INS-LT10-200
1.60
50mm
034466
INS-LT7-50M
0.73
034467
INS-LT10-50M
0.73
2-3/16
033599
INS-LT7-203
2.30
033624
INS-LT10-203
2.30
2-7/16
033600
INS-LT7-207
3.20
033625
INS-LT10-207
3.20
2-1/2
033601
INS-LT7-208
3.00
033626
INS-LT10-208
3.00
60mm
034468
INS-LT7-60M
1.45
034469
INS-LT10-60M
1.45
2-15/16
033602
INS-LT7-215
5.80
033627
INS-LT10-215
5.80
034117
INS-LT7-300
5.50
034525
INS-LT10-300
5.50
70mm
034470
INS-LT7-70M
034471
INS-LT10-70M
75mm
034472
INS-LT7-75M
034473
INS-LT10-75M
Shaft
Size
Part No.
FEATURES/BENEFITS
PAGE B13-2
Wt.
Part No.
2.50
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Wt.
0.30
2.50
SELECTION
PAGE B13-6
B13-30
3/23/07 3:12:11 PM
IMPERIAL - ISAF
UNIFIED SAF
3/4 THRU 3 SOLIDLUBE LT INSERTS
Series
204
Shaft
Size
3/4
20mm
5/8
1-3/8
1.8445/1.8425
25.4
15.9
34.9
46.850 / 46.800
1-1/16
5/8
1-9/16
2.0415/2.0395
27.0
15.9
39.7
51.854 / 51.803
1-3/16
11/16
1-13/16
2.435/2.433
30.2
17.5
46.0
61.849 / 61.798
1-5/16
13/16
2-1/8
2.829/2.827
33.3
20.6
54.0
71.857 / 71.806
1-9/16
13/16
2-9/16
3.3415/3.3395
39.7
20.6
65.1
84.874 / 84.823
1-5/8
7/8
2-13/16
3.5375/3.5355
205
1
25mm
1-1/8
206
1-3/16
30mm
7/8
15/16
1-1/4
1-3/8
207
1-7/16
209
1-3/4
40mm
45mm
1-15/16
210
2
50mm
41.3
22.2
71.4
89.853 / 89.802
211
2-3/16
1-3/4
15/16
3-1/8
3.932/3.930
1-13/16
1-1/16
3-1/2
4.326/4.324
46.0
27.0
88.9
109.880 / 109.830
2-23/32
1-3/16
3-15/16
5.1135/5.1115
69.1
30.2
100.0
129.883 / 129.832
2-7/16
212
2-1/2
60mm
2-15/16
215
3
70mm
75mm
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SLEEVOIL
1-11/16
Sleeve Bearing
1-1/2
35mm
SELECTION
PAGE B13-6
B13-31
3/23/07 3:12:11 PM
IMPERIAL - ISAF
3-7/16 THRU 5 SOLIDLUBE MM BEARING INSERTS
UNIFIED SAF
C
A
700 Series
1000 Series
Shaft
Size
Part No.
Description
Part No.
Description
3-7/16
034438
INS-MM7-307
034439
INS-MM10-307
3-1/2
034440
INS-MM7-308
034441
INS-MM10-308
6.2
3-15/16
034442
INS-MM7-315
034443
INS-MM10-315
10.0
034444
INS-MM7-400
034445
INS-MM10-400
9.8
4-7/16
034446
INS-MM7-407
034447
INS-MM10-407
20.0
4-1/2
034448
INS-MM7-408
034449
INS-MM10-408
19.7
4-15/16
034450
INS-MM7-415
034451
INS-MM10-415
27.0
034452
INS-MM7-500
034453
INS-MM10-500
26.5
Wt.
L
Dia.
S
Spherical Dia.
3-1/2
7/8
4-7/8
5.182/5.180
1-1/8
5-5/8
6.057/6.055
4-1/2
1-1/4
6-15/16
7.370/7.367
1-3/8
7-9/16
7.995/7.992
Sleeve Bearing
Shaft
Size
3-7/16
6.4
3-1/2
6.2
3-15/16
10.0
9.8
4-7/16
20.0
4-1/2
19.7
4-15/16
27.0
26.5
Wt.
6.4
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-32
3/23/07 3:12:11 PM
IMPERIAL - ISAF
7/8 THRU 1-1/2 SOLIDLUBE LT CYLINDERICAL UNITS
L
UNIFIED SAF
LT700
Part Number
Description
033961
CYL-LT7-014
7/8
LT1000
Wt.
1.5
Part Number
Description
422596
CYL-LT10-014
Wt.
422595
CYL-LT10-015
422597
CYL-LT10-100
492598
CYL-LT10-102
422599
CYL-LT10-103
15/16
033960
CYL-LT7-015
033962
CYL-LT7-100
1-1/8
033963
CYL-LT7-102
1-3/16
033964
CYL-LT7-103
1-1/4
033965
CYL-LT7-104
422600
CYL-LT10-104
1-3/8
033966
CYL-LT7-106
422601
CYL-LT10-106
1-7/16
033967
CYL-LT7-107
422602
CYL-LT10-107
1-1/2
033968
CYL-LT7-108
422603
CYL-LT10-108
Shaft
Size
29.0
3.0
1.5
2.9
3.0
D Dia.
+.000
-.002
1-1/16
27/32
3-1/8
1- 9/16
1-3/16
15/16
3-1/2
1-13/16
1- 5/16
1-1/16
3-7/8
2-1/8
Sleeve Bearing
Shaft
Size
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
SLEEVOIL
1-1/2
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-33
3/23/07 3:12:12 PM
IMPERIAL - ISAF
1-15/16 THRU 2-1/2
SOLIDLUBE LT SCREW CONVEYOR HANGER BEARING
K
PIPE LOCK NUT
F STRAIGHT PIPE TAP

M
UNIFIED SAF
B
A
210
212
Series
210
Sleeve Bearing
212
LT700 Series
LT1000 Series
Shaft
Size
Part No.
Description
Wt.
Part No.
Description
1-15/16
033937
SCHB-LT7-115
5.8
033952
SCHB-LT10-115
1.9
033938
SCHB-LT7-200
5.7
033953
SCHB-LT10-200
2.0
Series
Wt.
2-7/16
033939
SCHB-LT7-207
7.1
033954
SCHB-LT10-207
5.0
2-1/2
033940
SCHB-LT7-208
7.0
033955
SCHB-LT10-208
4.8
Shaft
Size
1-15/16
2
2-7/16
2-1/2
F#
1-5/8
4-5//8
7/8
15/16
13/16
1-1/8
5-9/16
1-3/32
2-13/16
3-1/4
1-13/16
5-1/2
1-5/32
1-5/32
1-1/4
1-1/8
1-7/16
6-3/4
1-1/4
3-1/2
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-34
3/23/07 3:12:12 PM
IMPERIAL - ISAF
1-1/8 THRU 2 SOLIDLUBE LT HANGER BEARINGS
M PLUNGER SCREW
UNIFIED SAF
Shaft
Size
LT700
Part No.
LT1000
Description
Part No.
Wt.
Description
1.9
1-1/8
033890
HNG-LT7-102
033900
HNG-LT10-102
1-3/16
033891
HNG-LT7-103
033901
HNG-LT10-103
2.0
1-1/4
033892
HNG-LT7-104
033902
HNG-LT10-104
3.1
033893
HNG-LT7-106
033903
HNG-LT10-106
3.0
033894
HNG-LT7-107
033904
HNG-LT10-107
2.9
1-1/2
033895
HNG-LT7-108
033905
HNG-LT10-108
2.8
1-15/16
033896
HNG-LT7-115
033906
HNG-LT10-115
5.0
033897
HNG-LT7-200
033907
HNG-LT10-200
4.8
Shaft
Size
1-1/8
1-3/16
1-3/16
3-5/8
1-13/16
1/2
1-5/16
4-1/4
3-1/2
2-1/8
1/2
1-5/8
4-3/16
2-13/16
5/8
Sleeve Bearing
1-3/8
1-7/16
1-1/4
1-3/8
1-7/16
1-1/2
1-15/16
2
FEATURES/BENEFITS
PAGE B13-2
SLEEVOIL
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-35
3/23/07 3:12:12 PM
IMPERIAL - ISAF
3/4 THRU 1-1/2 SOLIDLUBE LM800 PILLOW BLOCKS
A
R
F
UNIFIED SAF
J
M
H
G
B
Shaft
Size
Part No.
Description
3/4
033692
P2B-LM8-012
.70
033693
P2B-LM8-100
.22
1-1/4
033694
P2B-LM8-104
.70
1-1/2
033695
P2B-LM8-108
.50
Shaft
Size
3/4
Sleeve Bearing
1
1-1/4
1-1/2
Wt.
1-7/32
1-1/8
4-1/2
1-11/32
3-1/2
F
Bolt Dia.
3/8
9/16
5/32
2-1/16
1-1/16
1/2
1/2
3/8
9/16
5/32
2-9/16
1-5/16
9/16
9/16
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-36
3/23/07 3:12:12 PM
IMPERIAL - ISAF
3/4 THRU 1-1/2 SOLIDLUBE LM800 4-BOLT FLANGE BEARING
B
UNIFIED SAF
Part No.
Description
Wt.
3/4
033696
F4B-LM8-012
.50
033697
F4B-LM8-100
.36
1-1/4
033698
F4B-LM8-104
.50
1-1/2
033699
F4B-LM8-108
.50
Shaft
Size
3/4
1
1-1/4
1-1/2
A
1-9/32
1-11/16
F
Bolt Dia
3-1/8
2-1/4
3/8
1/16
3-5/8
2-3/4
3/8
1/16
Sleeve Bearing
Shaft
Size
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-37
3/23/07 3:12:12 PM
IMPERIAL - ISAF
Sleeve Bearings - Babbitted
1/2 THRU 3-7/16 SOLID BABBITTED JOURNAL BEARINGS
UNIFIED SAF
M
H
(Min.-Max.)
F
A
Shaft
Size
Part No.
Description
Wt.
Frame
1/2
006102
P2B-BASO-008
0.6
LD-10
1-1/4
5/8
006104
P2B-BASO-010
1.0
3/4
006107
P2B-BASO-012
0.9
LD-10
1-1/2
LD-10
7/8
006109
P2B-BASO-014
1.7
15/16
006110
P2B-BASO-015
1.6
006111
P2B-BASO-100
1.5
1-1/8
006113
P2B-BASO-102
2.7
1-3/16
006114
P2B-BASO-103
2.6
1-1/4
006115
P2B-BASO-104
2.5
Sleeve Bearing
1-5/16
006117
P2B-BASO-105
4.4
1-3/8
006118
P2B-BASO-106
4.2
1-7/16
006119
P2B-BASO-107
4.0
1-1/2
006120
P2B-BASO-108
3.8
1-11/16
006124
P2B-BASO-111
6.0
1-3/4
006125
P2B-BASO-112
5.8
1-15/16
006128
P2B-BASO-115
8.2
006129
P2B-BASO-200
8.0
D
Min.
Max.
2-1/32
2-7/32
3-1/2
1-1/8
2-13/32
2-19/32
1-7/8
1-1/2
2-7/8
3-1/8
LD-10
2-3/8
4-3/4
1-3/4
3-3/8
3-5/8
...
2-7/8
5-1/2
3-7/8
4-1/8
LD-20
3-3/8
6-1/4
2-1/4
4-11/32
4-21/32
...
3-7/8
2-1/2
5-1/8
5-3/8
2-3/16
006132
P2B-BASO-203
12
...
4-3/8
7-3/4
2-3/4
5-1/2
2-7/16
006136
P2B-BASO-207
15
...
4-7/8
8-1/2
6-1/2
SLEEVOIL
2-11/16
006140
P2B-BASO-211
19
...
5-3/8
9-1/4
3-1/4
6-1/2
2-15/16
006144
P2B-BASO-215
25
LD-45
5-7/8
10
3-1/2
7-9/32
7-23/32
...
6-7/8
10-3/4
7-5/8
8-3/8
3-3/16
006148
P2B-BASO-303
33
3-7/16
006152
P2B-BASO-307
30
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-38
3/23/07 3:12:12 PM
IMPERIAL - ISAF
UNIFIED SAF
1/2 THRU 3-7/16 SOLID BABBITTED JOURNAL BEARINGS
F
Bolt
5/16
1/2
3/8
1-15/32
5/16
1/2
1/2
3/8
9/16
7/16
Grease Cups #
Pipe Tap
No. Reqd
Size
3/4
1/8
1-23/32
7/8
1/8
5/8
1/8
21/32
11/16
2-7/16
1-1/4
1/8
1/2
11/16
7/8
2-3/4
1-3/8
1/4
9/16
13/16
3-1/16
1-1/2
1/4
5/8
13/16
1-1/8
3-1/2
1-3/4
1/4
2-3/16
11/16
1-1/32
1-1/4
3-13/16
1-7/8
3/8
2-7/16
3/4
1-1/8
1-3/8
4-1/4
2-1/8
3/8
2-11/16
13/16
1-5/32
1-1/2
4-9/16
2-1/4
3/8
2-15/16
7/8
1-5/32
1-11/16
2-1/2
3/8
1-7/16
1-7/8
5-7/16
2-3/4
3/8
1/2
5/8
3/4
7/8
15/16
1
Shaft
Size
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
3-3/16
3-7/16
SLEEVOIL
# Grease cups or pressure ttings may be obtained thru our distributors; one required per bearing.
Sleeve Bearing
1-5/16
See page B13-10 for grease tting and reducer bushing part numbers
Note: All blocks have two base bolts.
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-39
3/23/07 3:12:12 PM
IMPERIAL - ISAF
1/2 THRU 3-15/16 SPLIT BABBITTED JOURNAL BEARINGS
UNIFIED SAF
Shaft
Size
Sleeve Bearing
SLEEVOIL
Part No.
Description
Wt.
1/2
006001
P2B-BASP-008
0.8
1-1/4
3-3/4
5/8
006004
P2B-BASP-010
1.1
3/4
006007
P2B-BASP-012
1.0
1-1/2
7/8
006010
P2B-BASP-014
1.9
15/16
006013
P2B-BASP-015
1.8
006016
P2B-BASP-100
1.7
1-1/16
006019
P2B-BASP-101
3.3
1-1/8
006022
P2B-BASP-102
3.2
1-3/16
006025
P2B-BASP-103
3.1
1-1/4
006028
P2B-BASP-104
3.0
1-5/16
006031
P2B-BASP-105
5.0
1-3/8
006034
P2B-BASP-106
4.8
1-7/16
006037
P2B-BASP-107
1.6
1-1/2
006040
P2B-BASP-108
4.4
1-5/8
006043
P2B-BASP-110
6.6
1-11/16
006046
P2B-BASP-111
6.4
1-3/4
006049
P2B-BASP-112
6.2
1-15/16
006052
P2B-BASP-115
8.6
006055
P2B-BASP-200
8.3
2-3/16
006058
P2B-BASP-203
12.2
2-1/4
006061
P2B-BASP-204
11.9
2-7/16
006064
P2B-BASP-207
15.6
2-1/2
006067
P2B-BASP-208
15.1
2-11/16
006070
P2B-BASP-211
20.0
2-15/16
006073
P2B-BASP-215
24.2
006076
P2B-BASP-300
23.7
3-7/16
006079
P2B-BASP-307
40
6-7/8
12
8-7/8
9-5/8
3-15/16
006082
P2B-BASP-315
53
7-7/8
13-1/2
4-1/2
10-3/32
10-29/32
Min.
Max.
2-3/4
4-1/4
1-1/8
3-1/8
3-3/8
4-3/4
1-1/2
3-1/2
3-3/4
2-1/2
5-1/4
1-3/4
4-1/4
6-1/4
4-13/16
4-15/16
3-3/8
6-3/4
2-1/4
5-1/8
5-3/8
7-1/2
2-1/2
5-15/16
6-1/16
4-1/2
8-1/2
2-3/4
6-1/4
6-3/4
9-1/4
6-7/8
7-3/8
5-3/8
10
3-5/16
7-1/2
10-3/4
3-1/2
8-1/4
8-3/4

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-40
3/23/07 3:12:13 PM

1/2 THRU 3-15/16 SPLIT BABBITTED JOURNAL BEARINGS
Shaft
Size
1/2
5/8
3/4
F
Bolt
5/16
1/2
23/64
1-15/32
5/16
1/2
1/2
3/8
9/16
7/16
Grease Cups #
Pipe Tap
No. Reqd
Size
3/4
1/8
1-23/32
7/8
1/8
9/16
1/8
5/8
5/8
2-7/16
1-1/4
1/8
9/16
11/16
3/4
2-3/4
1-3/8
1/4
9/16
25/32
13/16
3-1/16
1-1/2
1/4
11/16
13/16
15/16
3-1/2
1-3/4
1/4
11/16
3-13/16
1-7/8
3/8
11/16
1-1/8
4-1/4
2-1/8
3/8
13/16
1-1/8
1-3/16
4-9/16
2-1/4
3/8
13/16
1-1/8
1-5/16
2-1/2
3/8
15/16
1-3/8
1-1/2
5-3/4
2-7/8
1/2
1/2
UNIFIED SAF
IMPERIAL - ISAF
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
7/8
1-1/2
1-5/8
1-11/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
3-7/16
3-15/16
1
1-1/2
1-5/8
6-7/16
3-1/8
See page B13-10 for grease tting and reducer bushing part numbers
Note: All blocks have 2 base bolts and 2 cap bolts
SLEEVOIL
1-15/16
Sleeve Bearing
1-3/4

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-41
3/23/07 3:12:13 PM
IMPERIAL - ISAF
1-15/16 THRU 8 RIGID BABBITTED JOURNAL BEARINGS (SPLIT HOUSING)
UNIFIED SAF
M
H
(Min.-Max.)
F
C
B
A
Shaft
Size
Part No.
Description
1-15/16
004060
P4B-BAR-115
004063
P4B-BAR-200
2-3/16
004066
P4B-BAR-203
2-1/4
004069
P4B-BAR-204
2-7/16
004072
P4B-BAR-207
2-1/2
004075
P4B-BAR-208
2-11/16
004078
P4B-BAR-211
2-15/16
004081
P4B-BAR-215
004084
P4B-BAR-300
Sleeve Bearing
3-3/16
004087
P4B-BAR-303
3-7/16
004090
P4B-BAR-307
3-1/2
004093
P4B-BAR-308
Wt.
10.6
8-1/4
13.2
4-1/2
18.4
D
Min.
Max.
3-1/2
6-3/8
6-5/8
8-1/2
3-1/2
6-5/8
6-7/8
10-1/4
7-3/4
8-1/4
22.4
5-1/2
10-1/2
4-1/4
8-1/2
30.6
11
4-1/2
8-1/2
50.2
13
10-1/8
10-7/8
12-1/2
3-15/16
004096
P4B-BAR-315
64
14-3/4
5-1/2
11-1/2
4-7/16
004099
P4B-BAR-407
88
16-1/2
6-1/4
13
14
4-15/16
004102
P4B-BAR-415
113
10
18
14-3/8
15-5/8
5-7/16
004105
P4B-BAR-507
147
11
19-1/4
7-3/4
15-1/8
16-3/8
5-15/16
004108
P4B-BAR-515
184
12
20-1/2
8-1/2
15-7/8
17-1/8
18-5/8
6-1/2
004113
P4B-BAR-608
255
13
22
9-1/2
17-3/8
004114
P4B-BAR-700
310
14
23
10
18-3/8
19-5/8
7-1/2
004115
P4B-BAR-708
370
15
24-1/2
10-1/2
19-3/8
20-5/8
004116
P4B-BAR-800
430
16
26
11
20-3/4
22-1/4
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-42
3/23/07 3:12:13 PM
IMPERIAL - ISAF
UNIFIED SAF
1-15/16 THRU 8 RIGID BABBITTED JOURNAL BEARINGS (SPLIT HOUSING)
F
Bolt
1-3/4
1/2
3/4
7/8
3-1/2
1-3/4
1/2
3/4
5/8
2-1/4
5/8
2-1/2
Grease Cups #
Pipe Tap
No. Reqd
Size
1-3/4
1/4
3-13/16
1-7/8
3/8
1-1/8
4-1/4
2-1/8
3/8
1-1/4
4-9/16
2-1/4
3/8
5/8
1-3/8
2-1/2
3/8
2-3/4
3/4
1-1/4
1-1/2
5-29/32
3-1/4
1/2
3-15/16
3/4
1-3/8
1-5/8
6-17/32
3-1/2
1/2
4-7/16
3-1/2
7/8
1-1/2
1-3/4
7-17/32
4-1/8
1/2
4-15/16
7/8
1-5/8
1-7/8
8-7/32
4-1/2
1/2
5-7/16
4-1/2
1-3/4
9-1/32
1/2
5-15/16
1-1/8
1-7/8
2-1/8
9-7/8
5-1/2
1/2
5-1/2
1-1/8
1-7/8
2-1/4
10-23/32
1/2
1-1/4
2-3/8
11-1/2
6-1/2
1/2
6-1/4
1-3/8
2-1/8
2-1/2
12-5/32
6-3/4
1/2
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
Shaft
Size
3-1/2
6-1/2
7
7-1/2
8
6-3/4
1-3/8
2-1/4
2-1/2
12-3/4
7
1/2
2
4
# Grease cups or pressure ttings may be obtained thru our distributors; one required per bearing up thru 4-15/16 sizes and two required for
balance of sizes.
See page B13-10 for grease tting and reducer bushing part number.
Note: 1-15/16 - 3 sizes have 2 cap bolts. 3-3/16 and larger sizes have 4 cap bolts (shown in diagram)
SLEEVOIL
3-7/16
Sleeve Bearing
3-3/16

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-43
3/23/07 3:12:13 PM
IMPERIAL - ISAF
1-15/16 THRU 8 ANGLE BABBITTED PILLOW BLOCKS
J
UNIFIED SAF
M
H
E
D
(Min.-Max.)
C
A
Sleeve Bearing
Shaft
Size
Part No.
Description
Wt.
Used
on Frame
1-15/16
230050
P4B-BAA-115
11
HD-200
8-1/4
3-1/2
2-3/16
230053
P4B-BAA-203
14
HD-200
4-1/2
8-1/2
2-7/16
230056
P4B-BAA-207
20
HD-200
10-1/4
2-11/16
230059
P4B-BAA-211
24
HB-250
5-1/2
2-15/16
230062
P4B-BAA-215
28
HD-250
3-7/16
230065
P4B-BAA-307
47
HD-300
3-15/16
230068
P4B-BAA-315
61
HD-350
14-3/4
4-7/16
230071
P4B-BAA-407
84
HD-400
16-9/16
4-15/16
230074
P4B-BAA-415
112
HD-400
10
18
5-7/16
230077
P4B-BAA-507
154
HD-500
11
19-3/4
15-1/16
16-7/16
5-15/16
230080
P4B-BAA-515
184
HD-500
12
20-1/2
8-1/2
15-13/16
17-3/16
6-1/2
230134
P4B-BAA-608
220
...
13
22
9-5/8
17-3/16
18-13/16
230137
P4B-BAA-700
275
...
14
23
10
18-1/4
19-3/4
230140
P4B-BAA-800
400
...
16
26
11
20-11/16
22-5/16
Min.
Max.
6-5/16
6-11/16
3-1/2
6-9/16
6-15/16
7-11/16
8-5/16
10-1/2
4-1/4
7-15/16
8-9/16
11
4-1/2
8-7/16
9-1/16
13
10-1/16
10-15/16
5-1/2
11-7/16
12-9/16
6-5/16
12-15/16
14-1/16
14-5/16
15-11/16
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-44
3/23/07 3:12:13 PM
IMPERIAL - ISAF
F
Bolt
1-15/16
1-3/4
1/2
3/4
7/8
4-11/16
2-3/16
1-3/4
1/2
3/4
2-7/16
5/8
2-11/16
2-1/4
5/8
2-15/16
2-1/2
3-7/16
Grease Cups #
Pipe Tap
No. Reqd
Size
2-1/4
1/4
5-1/8
2-1/2
3/8
1-1/8
5-9/16
2-3/4
3/8
1-1/4
5-7/8
3/8
5/8
1-3/8
6-3/8
3-1/4
3/8
2-3/4
3/4
1-1/4
1-1/2
7-1/8
3-1/2
1/2
3-15/16
3/4
1-3/8
1-21/32
7-1/2
3-3/4
1/2
4-7/16
3-1/2
7/8
1-1/2
1-3/4
8-1/2
4-1/8
1/2
4-15/16
7/8
1-5/8
1-7/8
9-3/16
4-1/2
1/2
5-7/16
4-1/2
1-1/8
1-7/8
10-1/4
1/2
5-15/16
1-1/8
1-7/8
2-1/8
11-1/16
5-1/2
1/2
5-1/2
1-1/8
2-1/4
12-1/8
1/2
1-1/8
2-3/8
13
6-1/2
1/2
6-1/2
7
Sleeve Bearing
Shaft
Size
UNIFIED SAF
1-15/16 THRU 8 ANGLE BABBITTED PILLOW BLOCKS
8
6-3/4
1-3/8
2-1/4
2-1/2
14-1/16
7
1/2
2
4
# Grease cups or pressure ttings may be obtained thru our distributors; one required per bearing up thru 4-15/16, sizes and two required for
balance of sizes.
Note: 1-15/16 - 3-7/16 sizes have 2 cap bolts.
3-7/16 - 5-15/16 have 3 cap bolts (shown in diagram).
6-1/2 and larger sizes have 4 cap bolts.
FEATURES/BENEFITS
PAGE B13-2
SLEEVOIL
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-45
3/23/07 3:12:13 PM
IMPERIAL - ISAF
1-15/16 THRU 4-15/16 PLATE TYPE BABBITTED FLANGE BEARING
F
PIPE TAP
D
DIA.
C
DIA.
UNIFIED SAF
B
DIA.
H
A
Shaft
Part No.
Description
15/16
037001
F4B-BAP-015
037010
F4B-BAP-100
1-3/16
037002
F4B-BAP-103
1-1/4
037011
F4B-BAP-104
1-7/16
037003
F4B-BAP-107
1-1/2
037012
F4B-BAP-108
1-11/16
037004
F4B-BAP-111
1-15/16
037005
F4B-BAP-115
037013
F4B-BAP-200
Wt.
B
Dia.
C
Dia.
D
Dia.
3.6
2-1/2
4-1/2
2-1/2
3-1/2
5.3
5-1/4
2-3/4
8.6
3-1/2
3-1/4
4-3/4
12
6-1/2
3-3/4
5-1/4
Sleeve Bearing
2-3/16
037006
F4B-BAP-203
17
4-1/2
7-1/2
5-3/4
2-7/16
037007
F4B-BAP-207
22
4-1/2
6-1/4
2-11/16
037017
F4B-BAP-211
32
5-1/2
2-15/16
037009
F4B-BAP-215
35
9-1/2
5-1/4
7-1/2
3-7/16
037020
F4B-BAP-307
53
10-3/8
6-1/4
8-1/2
3-15/16
037022
F4B-BAP-315
70
11-1/8
6-7/8
9-1/4
4-7/16
037024
F4B-BAP-407
103
12-5/8
7-3/4
10-1/2
4-15/16
037026
F4B-BAP-415
140
10
14
8-1/2
11-1/2

SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-46
3/23/07 3:12:14 PM
IMPERIAL - ISAF
F Bolt
3/8
3/8
3/8
Size
3/4
1/8
7/16
1/8
1/2
1/2
1-1/4
1/4
1/2
5/8
1-1/2
1/4
1/2
11/16
1-5/8
1/4
2-3/16
5/8
3/4
1-7/8
3/8
2-7/16
5/8
7/8
2-1/8
3/8
2-11/16
3/4
1-3/4
3/8
2-15/16
3/4
2-1/4
3/8
3-7/16
3/4
2-3/4
1/2
3-15/16
3/4
1-1/8
3-1/4
1/2
4-7/16
7/8
1-1/4
3-3/4
1/2
4-15/16
1-3/8
4-1/4
1/2
1
1-3/16
1-1/4
1-7/16
1-1/2
1-11/16
1-15/16
2
Size
Grease Cups #
Pipe Tap
15/16
No.
Sleeve Bearing
Shaft
UNIFIED SAF
1-15/16 THRU 4-15/16 PLATE TYPE BABBITTED FLANGE BEARING
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-47
3/23/07 3:12:14 PM
IMPERIAL - ISAF
TYPE H BABBITTED TAKE-UP BEARINGS
UNIFIED SAF
Shaft
Size
Part
No.
Description
Frame
Size
1-15/16
012215
TP-H-115
TP10
2-3/16
012216
TP-H-203
TP10
Sleeve Bearing
2-7/16
012217
TP-H-207
TP30
2-15/16
021218
TP-H-215
TP30
3-7/16
021219
TP-H-307
TP50
3-15/16
021220
TP-H-315
TP50
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-48
3/23/07 3:12:14 PM
IMPERIAL - ISAF
Shaft
Size
1-15/16
Weight
lbs.
12.5
Frame
Size
TP10
2-3/16
12.6
TP10
2-7/16
22.4
TP30
2-15/16
23.6
3-7/16
3-15/16
2-3/8
Pipe
Tap
1/4
Cup
Size
0
2-3/8
3/8
2-3/4
3/8
3-9/16
2-3/4
3/8
9-5/8
4-3/16
3-1/8
3/8
9-5/8
4-11/16
3-1/8
3/8
2-3/8
5-1/2
6-1/8
2-7/16
4-1/2
2-3/8
5-1/2
6-1/8
2-3/4
2-1/2
6-1/2
3-3/8
7-5/16
3-1/16
TP30
2-1/2
6-1/2
3-3/8
7-5/16
46.0
TP50
3-1/8
8-1/2
4-1/2
47.2
TP50
3-1/8
8-1/2
4-1/2
SLEEVOIL
Sleeve Bearing
UNIFIED SAF
TYPE H BABBITTED TAKE-UP BEARINGS
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-49
3/23/07 3:12:14 PM
IMPERIAL - ISAF
Sleeve Bearings - Bronze-Bushed
1-15/16 THRU 2-15/16 SPLIT BRONZE JOURNAL BEARING
G
UNIFIED SAF
J
M
H
(Min-Max.)
C
F
Sleeve Bearing
Shaft
Size
Part No.
Description
Wt.
1-15/16
005070
P2B-BZSP-115
3-7/8
7-1/2
2-3/16
005073
P2B-BZSP-203
12
4-3/8
2-7/16
005076
P2B-BZSP-207
15
4-7/8
2-11/16
005079
P2B-BZSP-211
20
2-15/16
005082
P2B-BZSP-215
24
Shaft
Size
F
Bolt
1-15/16
5/8
13/16
15/16
3-1/2
2-3/16
5/8
2-7/16
5/8
2-11/16
3/4
2-15/16
3/4
D
Min.
Max.
2-1/2
5-15/16
6-1/16
8-1/2
2-3/4
6-1/4
6-3/4
9-1/4
6-7/8
7-3/8
5-3/8
10
3-1/4
7-1/2
10-3/4
3-1/2
8-1/4
8-3/4
Grease Cups #
Pipe Tap
No. Reqd
Size
1-3/4
1/4
3-7/8
1-7/8
3/8
1-1/8
4-1/4
2-1/8
3/8
1-1/8
1-3/16
4-9/16
2-1/4
3/8
1-1/8
1-5/16
2-1/2
3/8
Note: All sizes have 2 bolt base and 2 cap bolts.
SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-50
3/23/07 3:12:14 PM
IMPERIAL - ISAF
15/16 THRU 215/16 SPLIT BRONZE JOURNAL BEARING
G
J
M
(Min.-Max.)
UNIFIED SAF
H
E
F
C
A
Part No.
Description
Wt.
3-7/16
005085
P4B-BZR-307
47
13
D
Min.
Max.
10-1/8
10-7/8
12-1/2
3-15/16
005088
P4B-BZR-315
64
14-3/4
5-1/2
11-1/2
4-7/16
005091
P4B-BZR-407
89
16-1/2
6-1/4
13
14
4-15/16
005094
P4B-BZR-415
115
10
18
14-3/8
15-5/8
5-7/16
005097
P4B-BZR-507
137
11
19-1/4
7-3/4
15-1/8
16-3/8
5-15/16
005100
P4B-BZR-515
180
12
20-1/2
8-1/2
15-7/8
17-1/8
6-1/2
005195
P4B-BZR-608
255
13
22
9-1/2
17-3/8
18-5/8
005198
P4B-BZR-700
310
14
23
10
18-3/8
19-5/8
7-1/2
005199
P4B-BZR-708
370
15
24-1/2
10-1/2
19-3/8
20-5/8
005201
P4B-BZR-800
430
16
26
11
20-3/4
22-1/4
F
Bolt
3-7/16
2-3/4
3/4
1-1/4
1-1/2
6-1/32
3-15/16
3/4
1-3/8
1-5/8
4-7/16
3-1/2
7/8
1-1/2
4-15/16
7/8
5-7/16
4-1/2
5-15/16
6-1/2
7
7-1/2
Grease Cups #
Pipe Tap
No. Reqd
Size
3-1/4
1/2
6-1/2
3-1/2
1/2
1-3/4
7-15/32
4-1/8
1/2
1-5/8
1-7/8
8-1/32
4-1/2
1/2
1-3/4
8-15/16
1/2
1-1/8
1-7/8
2-1/8
9-13/16
5-1/2
1/2
5-1/2
1-1/8
1-7/8
2-1/4
10-11/16
1/2
1-1/4
2-3/8
11-7/16
6-1/2
1/2
6-1/4
1-3/8
2-1/8
2-1/2
12-1/8
6-3/4
1/2
8
6-3/4
1-3/8
2-1/4
2-1/2
12-11/16
7
1/2
2
4
# Grease cups or pressure ttings may be obtained thru our distributors; one required per pillow block u thru 4-15/16 sizes and two required for
balance of sizes.
Note: All sizes have 4 base bolts. - 3-7/16 and larger sizes have 4 cap bolts.
Sleeve Bearing
SLEEVOIL
Shaft
Size
Shaft
Size

FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-51
3/23/07 3:12:14 PM
IMPERIAL - ISAF
1-15/16 THRU 8 ANGLE BRONZE-BUSHED PILLOW BLOCKS
UNIFIED SAF
J
M
H
E
D
(Min-Max)
C
A
B
Sleeve Bearing
Shaft
Part No.
Description
Wt.
Used on
Frame
1-15/16
231063
P4B-BZA-115
10
HD-200
8-1/4
3-1/2
2-3/16
231069
P4B-BZA-203
14
HD-200
4-1/2
8-1/2
2-7/16
231075
P4B-BZA-207
20
HD-200
10-1/4
2-11/16
231081
P4B-BZA-211
22
HD-250
5-1/2
2-15/16
231087
P4B-BZA-215
28
HD-250
3-7/16
231096
P4B-BZA-307
46
HD-300
3-15/16
231102
P4B-BZA-315
62
HD-350
14-3/4
4-7/16
231108
P4B-BZA-407
85
HD-400
16-9/16
4-15/16
231114
P4B-BZA-415
109
HD-400
10
18
5-7/16
231120
P4B-BZA-507
142
HD-500
11
19-3/4
15-1/16
16-7/16
5-15/16
231126
P4B-BZA-515
180
HD-500
12
20-1/2
8-1/2
15-13/16
17-3/16
6-1/2
231135
P4B-BZA-608
220
...
13
22
9-5/8
17-3/16
18-13/16
231141
P4B-BZA-700
275
...
14
23
10
18-1/4
19-3/4
231150
P4B-BZA-800
400
...
16
26
11
20-11/16
22-5/16
Min.
Max.
6-5/16
6-11/16
3-1/2
6-9/16
6-15/16
7-11/16
8-5/16
10-1/2
4-1/4
7-15/16
8-9/16
11
4-1/2
8-7/16
9-1/16
13
10-1/16
10-15/16
5-1/2
11-7/16
12-9/16
6-5/16
12-15/16
14-1/16
14-5/16
15-11/16

SLEEVOIL
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-52
3/23/07 3:12:14 PM
IMPERIAL - ISAF
1/2
3/4
7/8
4-11/16
2-1/4
1/4
1-3/4
1/2
3/4
5-1/8
2-1/2
3/8
2-7/16
5/8
1-1/8
5-9/16
2-3/4
3/8
2-11/16
2-1/4
5/8
1-1/4
5-7/8
3/8
2-15/16
2-1/2
5/8
1-3/8
6-3/8
3-1/4
3/8
3-7/16
2-3/4
3/4
1-1/4
1-1/2
7-1/8
3-1/2
1/2
3-15/16
3/4
1-3/8
1-5/8
7-1/2
3-3/4
1/2
4-7/16
3-1/2
7/8
1-1/2
1-3/4
8-1/2
4-1/8
1/2
4-15/16
7/8
1-5/8
1-7/8
9-3/16
4-1/2
1/2
5-7/16
4-1/2
1-7/8
10-1/4
1/2
5-15/16
1-1/8
1-7/8
2-3/16
11-1/16
5-1/2
1/2
6-1/2
7
F
Bolt
Grease Cups #
Pipe Tap
Qty.
Size
5-1/2
1-1/8
2-1/4
12-1/8
1/2
1-1/4
2-3/8
13
6-1/2
1/2
8
6-3/4
1-3/8
2-1/4
2-1/2
14-1/16
7
4
1/2
2
4
# Grease cups or pressure ttings may be obtained thru our distributors; one required per pillows block up thru 4-15/16 sizes and two required
for balance of sizes.
Note: 1-15/16 - 3-7/16 sizes have 2 cap bolts
3-15/16 - 5-15/16 sizes have 3 cap bolt (shown in diagram)
6-1/2 and larger have 4 cap bolts
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Sleeve Bearing
1-3/4
2-3/16
SLEEVOIL
1-15/16
Cap
Bolts
Quantity
2
Shaft
UNIFIED SAF
1-15/16 THRU 8 ANGLE BRONZE-BUSHED PILLOW BLOCKS
SELECTION
PAGE B13-6
B13-53
3/23/07 3:12:15 PM
IMPERIAL - ISAF
1/2 THRU 1-1/4 BRONZOIL PILLOW BLOCKS
A
BEARING SURFACE
FOR COLLAR
UNIFIED SAF
J
M
D
B
RUBBER GROMMET
Shaft
Size
1/2
Part No.
Description
035025
P2B-BO-008
5/8
035026
P2B-BO-010
3/4
035027
P2B-BO-012
Wt.
0.6
1-1/8
1-3/16
0.5
1-1/8
1-3/16
Sleeve Bearing
7/8
035028
P2B-BO-014
15/16
035029
P2B-BO-015
035030
P2B-BO-100
1-3/16
035107
P2B-BO-103
1.3
1-3/4
4-1/2
1-1/4
3-1/2
1-1/4
035108
P2B-BO-104
1.2
1-3/4
4-1/2
1-1/4
3-1/2
Shaft
Size
1/2
F
Bolt
5/8
3/8
9/16
5/32
2- 5/16
1-1/16
1/2
5/8
3/8
9/16
5/32
2-5/16
1-1/16
1/2
5/8
3/4
7/8
15/16
1
1-3/16
3/8
9/16
5/32
2-13/16
1-5/16
7/8
7/8
1-1/4
3/8
9/16
5/32
2-13/16
1-5/16
27/32
29/32
Grommets are optional and furnished on order only. Order (2) grommet long nipples (part number 035082) for each pillow block
SLEEVOIL
When grommets are used, the J and M dimensions increase by 1/16 and the H dimension by 1/8. A 5/16 bolt and a washer must be used with
each grommet. Washer part number 035084.
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SELECTION
PAGE B13-6
B13-54
3/23/07 3:12:15 PM
IMPERIAL - ISAF
1/2 THRU 1-1/4 BRONZOIL 4-BOLT FLANGE BEARING
A
B
H
D B
UNIFIED SAF
D B
RUBBER GROMMET
FLAT WASHER
(OPTIONAL)
Shaft
Size
Part No.
Description
1/2
035031
F4B-BO-008
5/8
035032
F4B-BO-010
3/4
035033
F4B-BO-012
F4B-BO-014
7/8
035034
15/16
035035
F4B-BO-013
035036
F4B-BO-100
Wt.
0.60
1-1/4
0.50
1-1/4
1-3/16
035116
F4B-BO-103
1.30
1-7/8
3-5/8
1-1/4
035117
F4B-BO-104
1.20
1-29/32
3-5/8
F
Bolt
STYLE
3-1/8
3/8
5/32
3-1/8
3/8
5/32
1-3/16
2-3/4
3/8
1/16
1-1/4
2-3/4
3/8
1/16
Shaft
Size
STYLE B
Sleeve Bearing
STYLE A
RUBBER GROMMET
FLAT WASHER
(OPTIONAL)
1/2
5/8
3/4
7/8
15/16
1
When grommets are used, the A dimension increases by 1/16 and the H dimension by 1/8. A 5/16 bolt and a washer must be used with each
grommet. Washer part number 035084.
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
SLEEVOIL
Grommets are optional and furnished on order only. Order (4) grommet short nipples (part number 035083) for each ange bearing.
SELECTION
PAGE B13-6
B13-55
3/23/07 3:12:15 PM
IMPERIAL - ISAF
Shaft Collars
UNIFIED SAF
Shaft
Size
Solid Steel
Part Number *
Dimensions
O.D. Width
Steel Stainless
Screw
(A)
(B)
Sleeve Bearing
SLEEVOIL
1/8
----456225 0.36
0.25
3/16
040001 456226 0.44
0.25
1/4
040002 456227 0.50
0.28
5/16
040003 456228 0.63
0.34
3/8
040004 456229 0.75
0.38
7/16
040005
----0.88
0.44
1/2
040006 456230 1.00
0.44
9/16
040007
----1.00
0.44
5/8
040008 456231 1.13
0.50
11/16
040009
----1.25
0.56
3/4
040010 456232 1.25
0.56
13/16
040011
----1.31
0.56
7/8
040012 456234 1.50
0.56
15/16
040013
----1.63
0.56
1
040014 456234 1.63
0.63
1-1/16 040015
----1.75
0.63
1-1/8
040016 456235 1.75
0.63
1-3/16 040017
----2.00
0.69
1-1/4
040018 456236 2.00
0.69
1-5/16 040019
----2.13
0.69
1-3/8
040020
----2.13
0.75
1-7/16 040021
----2.25
0.75
1-1/2
040022 456237 2.25
0.75
1-9/16 040023
----2.50
0.81
1-5/8
040024
----2.50
0.81
1-11/16 040025
----2.50
0.81
1-3/4
040026 456238 2.75
0.88
1-7/8
040027
----2.75
0.88
1-15/16 040028
----3.00
0.88
2
040029 456239 3.00
0.88
2-3/16 040030
----3.25
0.94
2-1/4
040031
----3.25
0.94
2-7/16 040032
----3.50
1.00
2-1/2
040033
----3.50
1.00
2-15/16 040034
----4.25
1.13
NOTE: Steel is mild carbon steel.
Stainless is 300-series stainless.
All sizes are tted with one setscrew.
FEATURES/BENEFITS
PAGE B13-2
#6
#8
#10
#10
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Wt.
0.01
0.01
0.01
0.01
0.01
0.05
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.2
0.2
0.4
0.4
0.4
0.4
0.5
0.5
0.7
0.6
0.6
0.8
0.8
1.0
1.0
1.2
1.2
1.4
1.3
2.2
Solid Iron
Dimensions
O.D. Width
Wt.
(A)
(B)
Shaft
Part
Size Number
1-15/16
2
2-3/16
2-7/16
2-1/2
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6
6-1/2
7
7-1/2
8
010020
010021
010024
010028
010029
010032
010036
010039
010043
010048
010051
010054
010055
010056
010057
010058
010059
010060
010061
3.38
3.38
3.75
4.25
4.25
4.75
5.00
5.50
5.75
6.50
7.25
8.00
8.75
9.25
9.25
10.00
10.50
11.38
12.13
1.38
1.38
1.38
1.50
1.50
1.50
1.63
1.63
1.75
1.88
2.00
2.13
2.13
2.25
2.25
2.25
3.38
2.50
2.88
2.5
2.5
3.0
4.3
4.3
5.0
5.6
7.0
7.6
10.0
12.0
16.3
18.5
23.0
23.0
25.0
32.0
35.0
45.0
NOTE: Solid and Split iron collars have

one set screw thru 3-1/4 bore
size. 3-3/16 and larger bores have
two setscrews.
SPECIFICATION/HTO
PAGE B13-4
NOMENCLATURE
PAGE B13-5
Split Iron
Dimensions
O.D. Width
Wt.
(A)
(B)
Shaft
Part
Size Number
1-1/8
1-3/16
1-1/4
1-5/16
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
3-3/16
3-7/16
3-11/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6
6-1/2
7
7-1/2
8
010075
010076
010077
010078
010080
010081
010084
010085
010088
010089
010092
010093
010096
010097
010100
010104
010105
010107
010110
010112
010114
010117
010120
010123
010126
010127
010128
010129
010130
010131
3.13
3.13
3.13
3.38
3.38
3.38
3.75
3.75
4.06
4.06
4.50
4.50
4.44
4.88
5.31
5.50
5.50
6.06
6.06
6.81
7.00
8.13
8.50
9.00
9.50
10.13
11.00
12.00
12.94
13.50
1.25
1.25
1.25
1.44
1.44
1.44
1.56
1.56
1.75
1.75
1.88
1.88
1.88
2.00
2.06
1.88
1.88
2.38
2.38
2.63
2.75
3.31
3.25
3.25
3.25
4.06
4.25
4.50
4.69
4.88
1.3
1.3
1.3
1.8
1.8
1.8
2.4
2.4
2.6
2.6
3.4
3.4
3.8
4.3
5.4
4.6
4.4
8.0
6.0
10.6
9.0
17.0
20.8
23.0
23.7
35.0
41.0
46.0
56.0
71.0
SELECTION
PAGE B13-6
B13-56
3/23/07 3:12:15 PM

Dodge Sleeve Bearings

Uploaded by

Copyright:

Available Formats

Dodge Sleeve Bearings

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dodge Sleeve Bearings

Uploaded by

Copyright:

Available Formats

What are sleeve bearings used for?

What are sleeve bearings used for?

What are the different types of sleeve bearings described in the document?

What are the different types of sleeve bearings described in the document?

Sleeve Bearings

Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-2

Specification/How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-4

SOLIDLUBE - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-8

Key Word Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-34

Shaft Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-52

Self-Lubricating, Statically Self-Aligning Bearings for

Ideal where bearings are subject to dry cycles or

GOOD FOR SLOW SPEEDS AND SHOCK

2 and 4 Bolt Housings

Babbitted Bearing Surface

Brass Locking Spool for Easy Bushing Replacement

HOW TO ORDER SLEEVE BEARINGS

There are two ways to specify DODGE Sleeve

Grease lubricated for moderate speeds and loads, ambient

When part numbers are not shown, the product may be

Statically self-aligning, non-galling, solid-film lubricating for

Economical, statically self-aligning, and self-lubricating

-200 to -40F; 250F to 1,000F

Also suitable for submerged and limited movement

P2B - LT7 - 108 - SH

Wide Slot Take-Up

Pillow Block, 2 Bolt

Commercial steel shafting is good in applications where temperatures do not

When commercial shafting is exposed to a corrosive media, it will oxidize. A

Noise or High Pitched Squeal

Carbon-graphite bushings can develop a high frequency vibration in resonance

Sleeve Bearings - SOLIDLUBE - Inch

For compatibility or specic chemical, contact Application

700 and 1000 Series SOLIDLUBE Bearing

SOLIDLUBE Bearing Corrosion (Chemical) Resistance

Radial Load Ratings in Pounds at various Revolutions per Minute

Commercial steel shafting is good in applications where temperatures do not

When commercial shafting is exposed to a corrosive media, it will oxidize. A

Noise or High Pitched Squeal

SOLIDLUBE bearings or bearings made from alternate bushing materials such

Shaft size, material and rpm.

Normal load, shock load and frequency.

Ambient temperature and atmospheric conditions (water, dirt, corrosive, etc.)

Type of bearing: pillow block, flange bearing, etc.

Housing material desired.

SOLIDLUBE BEARING 700 and 1000 SERIES

Radial Load Ratings in Newtons at Various Revolutions per Minute

Max. Radial Load

Use only when shaft movement is Limited to approx. 90

Sleeve Bearings - SOLIDLUBE - Metric

Important-Referring to Table and Table on the opposite

thru 7, at right, are met. If these conditions cannot be

Rigid Babbitted Pillow Blocks

Load ratings are based on industry standard ratings

Angle Babbitted Pillow Blocks

Plate Type Flange Bearings

1. Maintain adequate grease lubrication.

2. Maintain proper bearing alignment for uniform

Split Babbitted Journals

Type A and B Take-Ups