Scribd
Upload
506 views14 pages

Win CC

This document provides instructions for setting up an OPC server and connecting an OPC client to the OPC server through WinCC 6.2 SCADA software. The document outlines steps to create tags in the OPC server, activate the configuration, start the WinCC Explorer, create a new project, add an OPC driver, define an OPC group connection, create tags in WinCC, add the tags to a picture, and run the SCADA program to test the connection.

Uploaded by

NgocAnhNguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
506 views14 pages

Win CC

This document provides instructions for setting up an OPC server and connecting an OPC client to the OPC server through WinCC 6.2 SCADA software. The document outlines steps to create tags in the OPC server, activate the configuration, start the WinCC Explorer, create a new project, add an OPC driver, define an OPC group connection, create tags in WinCC, add the tags to a picture, and run the SCADA program to test the connection.

Uploaded by

NgocAnhNguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Configuration Manual For SCADA

WinCC 6.2
Configuration Manual For SCADA Table of Contents
Table of Contents

Chapter 1 WinCC 6.2.......................................................................................................3
1-1 Set up OPC Server.................................................................................................4
1-2 Connect OPC Client to OPC Server through WinCC 6.2........................................5

































2






Chapter 1

WinCC 6.2






























3
Configuration Manual For SCADA WinCC 6.2
1-1 Set up OPC Server
Please create tags according to the Configuration Manual.


Later, click [ File ] [ Make Active ] to activate new created configuration file.



4
WinCC 6.2 Configuration Manual For SCADA
1-2 Connect OPC Client to OPC Server through WinCC 6.2

Start SIMATIC WinCC Explorer; then click [ File ] [ New ]


Select [ Single-User Project ] and then choose [ OK ].




5
Configuration Manual For SCADA WinCC 6.2
Write down the project name; then click [ Create ].


Press the right key on [ Tag Management ] choosing [ Add New Driver ].








6
WinCC 6.2 Configuration Manual For SCADA
Select OPC.chn


Press the right key on [ OPC Groups ] selecting [ New Driver Connection ].








7
Configuration Manual For SCADA WinCC 6.2
Define the name, and click the [ Properties ].


Write down the OPC Server to be connected; then click [ Test Server ].



8
WinCC 6.2 Configuration Manual For SCADA
Under normal connection


Press the right key on OPC selecting [ New Tag ].




9
Configuration Manual For SCADA WinCC 6.2
Define the tag name and click [ Select ] to define the path.


Click [ OK ] after the path is confirmed.



10
WinCC 6.2 Configuration Manual For SCADA
Create new picture and add in the tag.

Open the item.




11
Configuration Manual For SCADA WinCC 6.2
Choose [ I/O Field ].


Press the right key on the icon and select [ Configuration Dialog ].


12
WinCC 6.2 Configuration Manual For SCADA
View all the tags


Select the tag you have created.




13
Configuration Manual For SCADA WinCC 6.2
Run the SCADA program.

Under normal condition


14

You might also like