Scribd Logo
Upload

Welcome to Scribd!

  • 92 views

    3-Way Dual Shut Off Valves

    Uploaded by

    Pete Decha
    This document summarizes industrial 3-way dual shut-off valves used for refrigeration systems. It describes the materials they are made from, pressure and temperature ratings, and applications. These valves have two inlets and two outlets to allow either side to be closed off individually. They are required in refrigeration systems over 10 cubic feet to safely install or replace relief valves without shutting down the entire system. The document provides specifications for various models including connection sizes, dimensions, and weights.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    3-Way Dual Shut Off Valves

    Uploaded by

    Pete Decha
    92 views1 page
    This document summarizes industrial 3-way dual shut-off valves used for refrigeration systems. It describes the materials they are made from, pressure and temperature ratings, and applications. These valves have two inlets and two outlets to allow either side to be closed off individually. They are required in refrigeration systems over 10 cubic feet to safely install or replace relief valves without shutting down the entire system. The document provides specifications for various models including connection sizes, dimensions, and weights.

    Original Description:

    3-Way Dual Shut Off Valves

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes industrial 3-way dual shut-off valves used for refrigeration systems. It describes the materials they are made from, pressure and temperature ratings, and applications. These valves have two inlets and two outlets to allow either side to be closed off individually. They are required in refrigeration systems over 10 cubic feet to safely install or replace relief valves without shutting down the entire system. The document provides specifications for various models including connection sizes, dimensions, and weights.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    92 views1 page

    3-Way Dual Shut Off Valves

    Uploaded by

    Pete Decha
    This document summarizes industrial 3-way dual shut-off valves used for refrigeration systems. It describes the materials they are made from, pressure and temperature ratings, and applications. These valves have two inlets and two outlets to allow either side to be closed off individually. They are required in refrigeration systems over 10 cubic feet to safely install or replace relief valves without shutting down the entire system. The document provides specifications for various models including connection sizes, dimensions, and weights.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Industrial & Commercial Refrigeration Products

    3-WAY DUAL SHUT-OFF VALVES


    29
    Bodies: 92Series: forged brass;
    802series: forged steel; painted
    Maximumworking pressure: 450 PSI (31.0 Bar) Steel
    650 PSI (44.8 Bar) Brass
    Temperature rating:
    Steel -20F (-29C) to +300F (+149C)
    Brass 40F (-40C) to +300F (+149C)
    Recommended for use with relief valve types
    92 series is suitablefor refrigerants and other industrial
    fluids non-corrosive to steel and brass
    802A Series is suitable for refrigerants including ammonia
    and other industrial fluids non-corrosive to steel
    Feat ur es:
    On all vessels 10 ft and larger when relief valves are used as the
    over pressure protective device, a dual relief valve assembly is
    required. Three-Way Dual Shut-off Valve inlets are shown at the
    bottom of the illustration. Tight shut-off can be obtained at either
    extreme of stem position, closing off either the left or right outlet
    port. The system should not be run with the valve stem in the center
    position. A dual relief valve installation consists of one three-way
    shut-off valve and two relief valves so arranged that both relief
    valves cannot be shut off from the protected pressure vessel at the
    same time. This permits safe removal of either relief valve for repair
    or replacement, while the vessel is protected and under pressure.
    Each relief valve must have sufficient capacity to provide the
    necessary discharge flow when used alone.
    The design of this Three-Way Valve provides full discharge
    area through the valve regardless of stem position, assuring
    maximum protection. Furthermore, this design provides for
    convenient parallel mounting of the two relief valves and fulfills
    the requirement set forth in the ANSI/ASHRAE 15.
    No stop valve shall be located between any automatic pres-
    sure relief device or fusible plug and the part or parts of the
    system protected thereby, except when the parallel relief de-
    vices are so arranged that only one can be rendered inopera-
    tive at a time for test or repair purposes.
    Two three-way valves, installed in a drier bypass arrangement,
    permit installation or removal of service drier without air, dirt,
    or moisture entering line.
    Type
    Catalog
    Number
    Conn.
    Size
    Dimensions in Inches
    A B C D E
    92 923 3/8 NPTF 2.75 2.06 2.50 1.25 3.60 1.15
    92 925 1/2 NPTF 2.75 2.06 2.50 1.25 3.60 1.05
    92 927 3/4 NPTF 2.75 2.06 2.81 1.40 3.88 1.67
    802A 8021A 1/2 NPTF 3.63 2.31 3.88 1.75 5.75 3.21
    802A 8022A 3/4 NPTF 3.63 2.31 3.88 1.75 5.75 3.00
    802A 8024 1 NPTF 5.81 3.68 3.88 2.00 7.50 7.87
    802A 8025 1 1/4 NPTF 5.81 3.68 3.88 2.00 7.50 6.92
    Wt.
    Lbs.

    You might also like