SPA DESIGN

Tomado de: SPAtrade Library Knowledge Base

ALGUNOS CONCEPTOS ACTUALES SOBRE EL
DESARROLLO Y DISEO DE SPA

General Observations on Spa Design
Interior design should provide a residential not institutional feeling. A simple yet
effective zone keying system should be installed. A proper signage system
should be installed for easy traffic flow. All treatment areas should be as sound
proof as possible.

Materials
Non-corrosive materials should be used in all high moisture areas (Vents, ducts,
drains, ceiling & wall cover). Easy to clean moisture resistant materials should
be used in all high moisture areas. Consider using local materials and
integrating cultural and artistic traditions

Locker / Changing / Vanity Area
Provide for appropriate number of half size lockers (two per full size
locker banks) on each side
Provide a separate alcove with third-size lockers (two per full size locker
banks) for members on each side
Utilize movable benches or Ottomans on casters for seating by lockers
Provide wall mounted soap, shampoo & conditioner dispensers in
showers
Provide make-up lights around vanity mirrors on womens side
Provide wall mounted magnified shaving mirrors at vanity on mens side
Provide wall mounted hair dryer units at vanities on both sides
Provide for electrical outlets above vanities
Flooring in locker and changing area should be carpeted, all other areas
tiled

Locker Room Wet Area
Accommodate Sauna, Steam, Whirlpool and Cold Pool (if applicable).
Provide lounge with water proof seating near each wet area.
Provide clothing hooks throughout area.
Flooring should be non-slip easily cleanable tile.
Provide for non-corrosive ventilation ducts in this area.
Outflow of HVAC should be provided for 25 air changes per tour.
Provide for ozone water purification system for whirlpools. (No smell).
Provide a self service beverage service station with sink, counter,
storage cabinet, mini-fridge & ice machine.
Provide for clean and soiled linen storage.
1
Spa Design Tips from The Experts

Create Texture: Use wall hangings, pillows, rugs and uniqe bed coverings to
creat texture and contrast in your spa. Locally made textiles embody a return to
folkloric ideals and handmade crafts. Balance a combination of elements, such
as reclaimed woods and other recyclables, textured glass, and metals such as
copper and bronze.

Bring the Outdoors In: Create a sense of the outdoors indoors by using with
waterfalls, bamboo, and stone. Natural elements such as calming waters and
meditative gardens intrigue spa visitors as they experience the environment
along with their treatments.

Dont Forget Dramatic Doors: Pay attention to doors and entryways: they
signify a crossing-over to a place where people can leave their everyday lives
behind. People are focusing on the client transition from the street to the spa
interior, says Clodagh. Water features, plants, and specialized lighting can
liven up a plain looking door.

Choose Colors that Stimulate the Senses: Flat color is out, and color with
depth and character is in, says well-known spa architect Robert Henry. Our
design philosophy is to create environments that engage the senses. Splashes
of color enliven our spirits; luxurious textures engage our touch; aromas
tantalize our sense of smell. All aspects of design contribute to the overall
experience and ultimately the success of a spa.

Components of a Spa Facility

The Basics:

Reception Desk and Welcome area
Reservations and Scheduling
Retail/Spa Boutique
Mens and Womens Locker Rooms
Dry Treatment Rooms
Wet Treatment Rooms
European Hydro-Massage
Treatment Showers and Baths
Treatment Waiting Area
Treatment Lab

2
Optional:
Private Relaxation/Meditation Areas
Mens and Womens Wet Areas
Common Wet Areas
Movement Studio
Fitness Equipment Studio
Swimming Pools and Aquatics
Administrative Offices
Staff Lounge
Storage Areas
Laundry Room
Spa Caf and J uice Bar
Beauty Salon

Design for Beauty Services in a Spa Environment
Beauty-related services such as nails, hair, and make-up can be
integrated into the spa environment, and some are best offered in a
separate salon area.
Floors should be of a material that is easy to clean (ie. Vinyl tile).
Lighting should be flattering to hair and Skin.
Include a separate small reception counter which also acts as the retail
point of sale.
Clients must be able to directly access the salon from the womens
locker room.

Design for Facial Rooms
Design Considerations
Laundry drop directly outside of rooms, preferably dropping into chute or
carts.
Millwork for cabinets must washable.
Provide extra sound proofing in between rooms and hallways.

Equipment:
Facial lounges: 72x30.
Provide a sink.
Provide stool on rollers, with adjustable height and back support.
Tip: mount items like mag and infra red lamps on walls to lessen wear and tear
on equipment

Space Requirements
80-100 sq. ft. 8x10 or 10x10. (allow enough space for door to open
comfortably, at the foot of table)

3
Location & Access
Located in dry therapy area with massage rooms, or in the Beauty
Salon area.
Lounge and wait area should be within close proximity to the treatment
rooms ( this minimizes traffic in between treatments).

Room Set-Up: Sink should be located behind lounge or to the side. (both hot
and cold running water is necessary) sink should be located behind lounge or to
the side. (both hot and cold running water is necessary)

Flooring
Linoleum or vinyl tile- floor must be non-porous, surface, smooth and
washable
Walls, Ceilings, and Doors
Wall paper or paint.
Tip: wallpaper may separate at seems from the steamer.
Doors must be solid and have some type of numbering or lettering for
identification and an in use sign.

Lighting
Indirect lighting with dimmer control on wall or overhead at edge of
ceiling, not directly over facial lounge.
Task lighting at counter surface.
Tip: provide separate overhead lighting for waxing, on separate switch. room
does not require daylight.

Electrical
Wall outlet at foot and sides of table.
Counter-height outlet for sterilizer, waxing unit, essential oil diffuser.
In-house with intercom, in each room.
Sound System: same system as for massage rooms-centrally located
sound system with speakers in each room. Tip: each room needs
individual volume control knob.

Storage:
Storage cabinet for professional products with locks and drawers for small tools.
Countertop for small sterilizer

4
Design for Massage/Touch Therapy Room
Design Considerations
Massage rooms should have a small sink and linen cabinet. Tip: provide
storage above and below sink
Rooms need to be sound insulated.
use lever-type hardware for door knobs (therapists have oil on their
hands)
Equipment: 72x30 massage tables: (deep tissue tables should be 39
wide)

Tip: tables should have built-in shelves and an adjustable face cradle attached
to the end of table--adding another 12 to the end of table
massage table upholstery should be made from Naugahyde with a smooth
surface with medium firm padding

Space Requirements: Generally 120-140 sq. ft., room variations include:
9x12, 19x12, 10x14, 12x12 therapist requires a min 3 work-space around
the massage table

Location & Access: Located in dry therapy area. Tip: should have access to
laundry storage and drop off

Room Set-Up: Sink and cabinet should be in corner at an angle in 9x12
rooms. Sinks should have hot and cold water

Flooring: Vinyl tile, wood, or cushioned recreational surface. Tip: avoid tile,
marble, or granite (too hard for the therapist to stand on)

Walls, Ceilings, and Doors: Washable wall paper or paint. Allow doors to open
comfortably. Doors need lettering or numbering and an in use sign or light

Lighting: Indirect lighting with dimmer control on walls or overhead (not directly
above massage table) windows lighting preferred with vertical, horizontal, or
roman blinds.

Electrical: Provide wall outlets at foot and sides of table, and a counter-height
outlet for and essential oil diffuser. Tip: In-house phone with intercom in rooms
is advised in larger facilities.

Sound System: One centrally located sound system, with speakers in each
room that have an individual volume control knob.

Storage: Smaller rooms can have tables with built-in storage space for linens,
towels, oils, bolsters etc. If room is too small to provide storage inside, storage
directly outside room is necessary


5
Designing Spa Treatment Rooms

Treatment Rooms: A wet area treatment room should feed off of each wet
area. Access to these treatment areas should be from both the mens and
womens locker rooms through a hallway.
The area should include:
Treatment tables.
Sink.
Counter space.
Clean and soiled linen storage.
Floor drain.
Overhead showers or treatment shower.
Infra-red heat lamps recessed into ceiling over each tables.

Dry Treatment Rooms:
Keep treatment areas as flexible as possible. Rooms to change when
program changes.
Provide for sinks, lockable storage cabinetry, counter space with mirror
above, clothing hooks on back of door, clean & soiled linen storage,
electrical outlets on two side walls and above counter, floors of an easily
cleanable material (ie. Vinyl tile).
All lighting should be indirect and on rheostats.
All treatment rooms should be as sound proof as possible.
Provide for separate music system with individual controls.
Provide for clothing hooks.
Provide for In Use signage on all treatment room doors.
Provide for lockable storage in each room.
Provide for numbers or letters on doors of each room for identification.
Balance of nature and man-made elements
Focus on healing environment

Dry Room Treatments
Massage
Facial.
Body dry brushing.
Body masks (seaweed, herbal, paraffin, parafango) seaweed, clay, or
mud body wraps (bust, back, cellulite, arms and legs) body exfoliation
self-tanning application (better in wet room)
Thermal heat treatments (blankets, packs, etc.).
Herbal wraps.
Sound and light machines (controlled environment therapy)
Relaxation lounge.

6
Key Environmental Dimensions

Ambient Conditions
Temperature
Air quality
Noise levels
Music
Smells/odors

Space/Function
Layout
Equipment
Furnishings

Signs/Symbols and Artifacts
Signage
Personal/thematic artifacts
Style of decor

Minimum Treatment Room Dimensions

The minimum dimensions for a massage room are 10' x 12'. This will give you
almost 4 feet (45 inches) on each side of the table.

Sound Systems and Lighting

Sound System: There should be 3 separate sound systems in the facility for
each of the following:

1. Public spaces--general system for majority of including weight gym.
2. Treatment rooms- strategically located system with individual
controls in each room.
3. Aerobics gym - separate system housed directly in gym with
cassette and CD player.
Lighting
1. Consider incandescent mood lighting
2. Lamps and sconces should reflect theme and soul of property
3. Should be indirect and on rheostats throughout the building

7
Space Planning

Effective space planning must be a team effort. You and your management
team (architect, designer, consultant and existing employees), will need to
develop a facility layout that takes into consideration:
Programs plumbing and electrical requirements.
Environmental variables such as noise control, colors and lighting.
Accessories and equipment requirements.
Traffic flow for peak use.
Ergonomics.
8