Catalogo Aimco Viejo

ASSEMBLY TOOL
CATALOG
SALES SERVICE SUPPORT
Quality Statement
AIMCO has an unwavering commitment
to customer service and satisfaction
SERVICE
Customer Service Associates avail-
able by phone until 8:00 PM EST
Shipments until 6:30 PM EST
Service Quotes within 24 hours
Most repairs within 72 hours
Full Calibration and Certification
Available
Extensive inventory of products,
parts and accessories
SUPPORT
Representatives in the United
States, Mexico, Europe and
Asia for fast, thorough support
More than 500 years of total
industry experience
Extensive sales, product and
repair training available
On-site product installation
and set-up
PERQ analysis of applications
and customer needs
Payback and ROI Analysis
POWER TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Screwdrivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Nutrunners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cordless Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Impact Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Percussion Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Grinders/Sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
CONTROLLED TOOLS . . . . . . . . . . . . . . . . . . . . . . . 53
AcraDyne
DC Continuous Drive Tools and Controller . . . . . . 57

Fixtured F-Series Nutrunners . . . . . . . . . . . . . . . . . . . . . . . . 66
Transducerized Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . . 70
Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
TORQUE MEASUREMENT . . . . . . . . . . . . . . . . . . 79
Auditor
TM
Torque Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Auditor
TM
Torque Data Analyzer and Collector . . . . . . . . . . . . 85
Auditor
TM
Transducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
AcraJoint Tool Test Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Joint Simulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Torque Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
ASSEMBLY SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . 93
AcraFeed Screw Presenters . . . . . . . . . . . . . . . . . . . . . . . . . 95
TOOL SUPPORT SYSTEMS . . . . . . . . . . . . . . . . . 97
Balancers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Retractors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Ergo-Arms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Linear Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Custom Reaction Devices . . . . . . . . . . . . . . . . . . . . . . . . . 101
Workstation Components and Assemblies . . . . . . . . . . . . . 102
Accessories Hose, Fittings, FRLs . . . . . . . . . . . . . . . . . . . 104
FASTENER TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . 107
Ergo-Drive
Fastener Tools . . . . . . . . . . . . . . . . . . . . . 108-109

Standard Fastener Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . 110
AI MCO / 1 - 800- 852-1 368 3 AI MCO / 1 - 800- 852-1 368
TABLE OF CONTENTS
AI MCO / 1 - 800- 852-1 368 4 AI MCO / 1 - 800- 852-1 368
PERQ
is the industry-standard formula that matches the

needs of manufacturers with the assembly tools they use
in their processes.
AIMCO and its distributors evaluate each manufacturer
based on the PERQ
formula to determine that

companys unique blend of the PERQ
elements
Productivity, Ergonomics, Reliability and Quality and
then provide tooling options that will enhance that mix.
The end result is a manufacturing process that runs
efficiently, produces high quality products and does so at
the lowest possible cost.
Combining PERQ
with AIMCOs vast experience and

unequalled service will enable any manufacturer to
succeed in the global marketplace.
RODUCTI VI TY
THE SPEED AND EFFICIENCY OF THE ASSEMBLY
PROCESS
Every manufacturer wants to produce finished goods in
the most cost-effective manner possible. Whether the
customer is a large automotive manufacturer building
several hundred vehicles daily or an electronics company
producing individual, custom-made components, AIMCO
provides products and services that allow each company
to work at the ideal pace in order to keep its processes
running efficiently.
P
RGONOMI CS
THE RELATIONSHIP BETWEEN THE WORKER AND THE
ASSEMBLY PROCESS
Employees are the most important assets of any company
and protecting these people as they do their job is
critical. To help its customers face the issues surrounding
ergonomics, AIMCO focuses on providing products that
combine a lack of torque reaction, low vibration, light
weight, quiet operation and simple operation. These
features allow workers to do their job in the safest
possible manner and help manufacturers avoid the often-
hidden costs of workplace injuries.
E
Visit: WWW.OSHA.GOV
to learn more about ergonomic issues
THE P. E. R. Q.
FORMULA
AI MCO / 1 - 800- 852-1 368 5 AI MCO / 1 - 800- 852-1 368
ELI ABI LI TY
THE TOTAL COST OF TOOL MAINTENANCE AND REPAIR
To keep workers working and production lines producing,
tools must perform reliably. AIMCO helps manufacturers
face the challenges of maintenance, repair and lost labor
time by offering products with superior workmanship and
durability. By combining high quality products with a
detailed and flexible service-training program, AIMCO
ensures its tools will meet any customers expectations of
reliability.
R
UALI TY
THE ABILITY OF THE TOOL TO ADHERE TO PROCESS
REQUIREMENTS
The most important challenge faced by any company is to
meet its customers demands for quality.
AIMCO provides assembly tools that have been tested and
proven to be able to meet the most stringent engineering
specifications. Then AIMCO backs those tools up with its
innovative Auditor
TM
torque measurement products. This
allows manufacturers to focus on their most important
goalcreating satisfied customers.
Q
Each of the PERQ
elements acts as a gear each

interacts with the others to affect the overall
profitability of the manufacturing process.
AIMCO looks at each step in the manufacturing
process to determine the best type of tool or equipment
for that application. Only AIMCO, with its extensive
product lineup, can offer the manufacturer the ideal
tool for a job, whether it be continuous drive or pulse
tool, electric, pneumatic or battery powered.
Productivity Ergonomics
Quality Reliability
Increase Revenue
Decrease Cost
10%
ACRA-PULSE* TRANSDUCERIZED SOLENOID
CONTROL NUTRUNNER*
8%
6%
4%
2%
0%
P
E
R
C
E
N
T
12%
14%
16%
CLAMP FORCE
14%
11%
3 Sigma Scatter - Soft 320 degree
See also: TESTING AND CALIBRATING EQUIPMENT
on page 79
THE P. E. R. Q.
FORMULA
AI MCO / 1 - 800- 852-1 368 6 AI MCO / 1 - 800- 852-1 368
YOUR 24-HOUR SOURCE!
BUYER' S GUI DES AND SELECTI ON CHARTS
Quick start guides
Search by torque range
Quick response on E-mail questions
New features added frequently
5
1 4 2 3
5
APPLICATION
JOINT RATE?
HARD A OR
MEDIUM B
MEDIUM C OR
SOFT D
PREVAILING TORQUE?
ERGONOMICS OF
PRIME CONCERN?
YES NO
UNDER
300-
500NM
OVER
300-
500NM
TIGHT
ACCESS?
YES NO
YES NO
UNDER
300-
500NM
OVER
300-
500NM 1 4
2 3
1 4
COMPLETE PRODUCT SPECS
Product descriptions and benefits
Specs in standard and metric
Accessories pre-selected for the tool
AFTER- THE-SALE
ONLI NE SERVI CE AND SUPPORT
Manuals
Parts Breakdowns
Call Guide
Service Center listing
AIMCO WEBSI TE WWW. AI MCO-GLOBAL. COM
PULSE TOOLS
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Omega Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
Acra-Pulse
Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . . 14-21

Stud Bolt Series Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . 22
SCREWDRI VERS
Screwdriver Clutch Styles: Overview . . . . . . . . . . . . . . . . . . 24
Pneumatic Screwdrivers. . . . . . . . . . . . . . . . . . . . . . . . . 25-31
Electric Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-36
NUTRUNNERS
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Angle Nutrunners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-40
CORDLESS TOOLS
Cordless Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Signature Series Pulse Tools . . . . . . . . . . . . . . . . . . . . . 43-48
I MPACT TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
DRI LLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
PERCUSSI ON TOOLS. . . . . . . . . . . . . . . . . . . . . . . . 51
GRI NDERS & SANDERS . . . . . . . . . . . . . . . . . . . . . 52
7 AI MCO / 1 - 800- 852-1 368 AI MCO / 1 - 800- 852-1 368
P
O
W
E
R

T
O
O
L
S
POWER TOOLS
HOW DOES A PULSE TOOL WORK?
The unique design of pulse tool, combining motor
power and hydraulics, leads to an assembly tool that
produces smooth, controlled torque in a series of very
fast (2 4 ms) events and virtually no torque reaction.
At free-speed, the entire pulse unit, a sealed cylinder
containing hydraulic fluid and an output shaft,
rotates at the same speed as the tool motor.
As resistance to rotation increases, the rotation of
the output shaft slows, while the rotation of the
cylinder and the hydraulic fluid continues, until they
approach a seal point within the cylinder.
This seal point produces an increase in fluid
pressure, and transmits the energy from the
rotational mass of the cylinder and fluid to the
output shaft, producing torque on the fastener.
After a series of these cycles (pulses), fluid pressure
builds to a point that overcomes the limit of a relief
valve, allowing pressure to drop and torque to be
controlled.
BENEFI TS OF AI MCO PULSE TOOLS:
Pulse tools offer advantages in all of the
PERQ
elements productivity, ergonomics,

reliability and quality.
By partnering with an AIMCO sales representative,
manufacturers can apply the advantages of pulse tools
in many ways to cut production costs and increase
profits.
Productivity Combining high operating speeds
with one-handed operation allows AIMCO pulse
tools to help manufacturers produce at the highest
possible rates.
Ergonomics Light weight, low vibration and no
torque reaction make AIMCO pulse tools the safest
assembly tools available for threaded assembly.
Reliability Advances in design and AIMCOs
extensive maintenance-training programs add up to
years of low cost service from any AIMCO pulse
tool.
Quality AIMCO pulse tools offer the most
repeatable torque and clamp load results of any
assembly tool, guaranteeing high product quality for
manufacturers in any industry.
8 AI MCO / 1 - 800- 852-1 368
1965
U Series
Uryu produces the U-series, the first
pulse tools to be available commercially
for assembly. The U-Series evolves over
the next several years to cover torque
ranges from 4 850 Newton-Meters and
finally the development of full-shut-off
tools. The lack of torque reaction and
accurate, repeatable torque makes these
tools a standard with thousands of
manufacturers.
New Technology
The first pulse tool prototype is
designed in an attempt to develop a
tool that will provide torque control
without the high maintenance costs
of impact wrenches.
1980
Driving
Blade
EC Series
The EC Series (and later the MC Series)
combines the advantages of pulse tools
with the technology of controlled tools.
By incorporating a transducer into the
design of the U-Series pulse tool,
customers gain the Productivity and
Ergonomics of pulse tools and the
traceability and control of other
transducerized assembly tools.
Manufacturers with safety-critical
applications now have many more
options for assembly tools.
1988
P
O
W
E
R

T
O
O
L
S
AI MCO PULSE TOOLS: OVERVI EW
AI MCO / 1 - 800- 852-1 368 9 AI MCO / 1 - 800- 852-1 368
Increases Productivity
High Power-to-Weight Ratio
Simple Operation
Reduced Maintenance
Extended Service Life
Environmentally Friendly Design
Accurate and Repeatable
UX-T800
1985
Alpha T70
1995
ULT-70
2002
6
5
4
3
2
1
0
ULT-100
2008
Competitor X
2008
Competitor Y
2008
W

E

I
G

H
T

(
lb
)
OMEGA UL AND ULT SERI ES
The UL and ULT Series stands as the most advanced
pulse tool in the world. Whether the goal is improving
Productivity, Ergonomics, Reliability or Quality, the UL /
ULT Series contains the technology to achieve success.
UL tools, with their non-shut-off operation, are ideal for
applications where the lightest, fastest tool is necessary.
ULT shut-off models offer excellent accuracy while
allowing the operator to work at the highest possible
speed without influencing the tightening process.
Each model features the powerful Alpha air motor and
latest in pulse-unit design.
64 models available from 2.5 260 Nm ( 2 190 FtLb)
Models with air, electric or battery power
Available in standard, Tightening Monitor and
transducerized versions
Size Comparison
AIMCO 1985-2008
Weight Comparison
AIMCO vs. Competition
1995 2001
Alpha Series
The Alpha-series continued Uryus
advancements in pulse-tool design.
In order to achieve the best possible
power-to-weight ratio, the Alpha
9-blade, twin-chamber air motor is
developed. Still unique today, this new
motor provides significantly more
power, thereby reducing cycle times
and improving torque repeatability. The
new Alpha air motor and design
changes that make the tools smaller
and lighter keep Uryu at the forefront
of pulse tool technology.
ULT / UL Series
Continuous innovations and
developments include a new O-ring
design that improves durability, roller
bearings in the pulse unit to increase
hydraulic fluid life and redesigned
porting that helps maintain fluid
temperature and torque repeatability.
These changes combined with even
more decreases in tool size and the use
of the Alpha air motor make the UL /
ULT Series the tool of choice in major
automotive and general industry
manufacturers throughout the world.
UEP-MC Series
Uryu does what no other
manufacturer can by developing the
UEP-series, the first and only electric-
powered pulse tool. The lower speeds,
quiet operation and extremely
repeatable torque make the UEP the
perfect choice for applications where
accuracy and clean operation are
critical. By combining programmable
tool speed with the MC-style
transducer, extremely accurate and
repeatable torque is achieved on a
variety of applications.
2006
Dual-Chamber
Air Motor
Conventional
Motor
VS.
P
O
W
E
R

T
O
O
L
S
OMEGA PULSE TOOLS: UL AND ULT SERI ES
AI MCO / 1 - 800- 852-1 368 1 0 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 1/4" I.D. for ULT-30 - ULT-50 Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
Air Hose Size: 3/8" I.D. for ULT-60 - ULT-100
Air Hose Size: 1/2" I.D. for ULT-150 - ULT-180
*All pulse tools ending in D include a 1/4" Hex quick-change bit holder. **Based on 57 psi air pressure
Body Jacket included.
MODEL FREE SPEED TORQUE RANGE WEIGHT OVERALL LENGTH DRIVE SOUND LEVEL AIR USAGE
rpm Nm ft-lb lb kg in mm in dB(A) cfm
ULT-30D 3700 2.5 - 5.5 1.9 - 4.1 1.9 0.9 6.4 163 1/4 hex dr. 74 7.0
ULT-40(D)* 3600 4.5 - 8 3.3 - 5.9 2.0 0.9 6.4 162 3/8 sq. dr. 75 7.0
ULT-50(D)* 4400 7 - 15.5 5.2 - 11.5 2.0 0.9 6.4 162 3/8 sq. dr. 78 8.8
ULT-60(D)* 6700 15 - 32 11 - 24 2.1 1.0 6.8 172 3/8 sq. dr. 80 12.3
ULT-70 6000 30 - 55 22 - 40 2.3 1.1 7.0 178 3/8 sq. dr. 80 14.0
ULT-90L** 5100 45 - 75 33 - 55 3.2 1.4 7.5 190 1/2 sq. dr. 79 12.8
ULT-90 5700 50 - 85 37 - 63 3.2 1.4 7.5 190 1/2 sq. dr. 82 18.6
ULT-100 5200 70 - 130 52 - 96 3.7 1.7 7.8 197 1/2 sq. dr. 82 19.3
ULT-130 4000 110 - 150 81 - 111 5.1 2.3 8.5 215 1/2 sq. dr. 82 25.6
ULT-150 3,700 140 - 210 103 - 155 6.4 2.9 9.4 238 3/4 sq. dr. 82 24.5
ULT-150L** 3,500 110 - 170 81 - 126 6.4 2.9 9.4 238 3/4 sq. dr. 79 17.5
ULT-180 3,300 170 - 260 126 - 192 8.1 3.7 10.4 262 3/4 sq. dr. 82 24.5
Recommended Air Pressure: 85 psi
Pistol Shut-Off
Tests have shown that non-shut-off pulse tools can
provide better torque repeatability than shut-off tools,
when each is used and maintained properly. Many
manufacturers prefer shut-off tools due to the higher
production rates and lack of operator influence they lend
to the assembly process.
ULT-50
OMEGA PULSE TOOLS: ULT SERI ES
P
O
W
E
R

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 1 1 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 1/4" I.D. for UL-30 (D/SD) - UL-50 (D/SD) Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
Air Hose Size: 3/8" I.D. for UL-60 (D/SD) - UL-100 (D/SD)
UL-30D 5700 6 - 12 4.4 - 8.9 1.5 0.7 5.3 135 1/4 hex dr. 75 7.0
UL-30 5700 6 - 12 4.4 - 8.9 1.5 0.7 5.2 131 3/8 sq. dr. 75 7.0
UL-40D 6100 11 - 20 8.1 - 14.8 1.5 0.7 5.5 140 1/4 hex dr. 75 7.0
UL-40 6100 13 - 22 9.6 - 16.3 1.5 0.7 5.2 131 3/8 sq. dr. 75 7.0
UL-50D 6400 18 - 28 13.3 - 20.7 1.7 0.8 5.7 144 1/4 hex dr. 78 10.5
UL-50 6400 22 - 35 16 - 26 1.7 0.8 5.4 137 3/8 sq. dr. 78 10.5
UL-60D 7000 22 - 35 16 - 26 1.8 0.8 5.7 144 1/4 hex dr. 80 14.0
UL-60 7000 32 - 50 24 - 37 1.8 0.8 5.4 137 3/8 sq. dr. 80 14.0
UL-70 5700 40 - 65 30 - 48 2.1 1.0 5.9 149 3/8 sq. dr. 80 15.8
UL-90 6000 60 - 100 44 - 74 2.9 1.3 6.6 168 1/2 sq. dr. 82 18.6
UL-100 5400 80 - 130 59.2 - 96.2 3.7 1.66 6.9 175 1/2 sq. dr. 80 20.3
Pistol Non Shut-Off
1
2
3
4
1
2
3
4
UL-30SD 5700 6 - 12 4.4 - 8.9 1.5 0.7 5.2 131 1/4 hex dr. 75 7.0
UL-30S 5700 6 - 12 4.4 - 8.9 1.5 0.7 5.3 135 3/8 sq. dr. 75 7.0
UL-40SD 6100 9 - 20 6.7 - 14.8 1.5 0.7 5.2 131 1/4 hex dr. 75 7.0
UL-40S 6100 11 - 22 8.1 - 16.3 1.5 0.7 5.5 140 3/8 sq. dr. 75 7.0
UL-50SD 6500 18 - 28 13.3 - 20.6 1.6 0.74 8.4 214 1/4 hex dr. 78 19.3
UL-50S 6500 22 - 35 16.3 - 25.9 1.6 0.74 8.2 208 3/8 sq. dr. 78 19.3
UL-60SD 7000 22 - 35 16.3 - 25.9 1.7 0.77 8.3 212 1/4 hex dr. 80 15.8
UL-60S 7000 32 - 50 23.7 - 37 1.7 0.77 8.2 209 3/8 sq. dr. 80 15.8
UL-70S 5700 36 - 60 26.6 - 44.4 2.1 1.0 5.9 149 3/8 sq. dr. 80 15.8
Inline Non Shut-Off
Roller bearings reduced friction
Accumulator stable fluid
temperature
Reduced size light-weight tools
New O-ring design better
durability
Omega Series Pulse Unit
UL-50S
UL-50
OMEGA PULSE TOOLS: UL SERIES
P
O
W
E
R

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 1 2 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 1/4" I.D. for ULT-30SD - ULT-50S(D) Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for ULT-60S(D) - ULT-70S
ULT-30SD 3700 2.5 - 5.5 1.9 - 4.1 1.6 0.8 8.7 221 1/4 hex dr. 66 7.0
ULT-40SD 3600 4.5 - 8 3.3 - 5.9 1.7 0.8 8.7 221 1/4 hex dr. 70 7.0
ULT-40S 3600 4.5 - 8 3.3 - 5.9 1.7 0.8 8.6 218 3/8 sq. dr. 70 7.0
ULT-50SD 4700 7.0 - 15.5 5.2 - 11.5 1.8 0.8 8.7 221 1/4 hex dr. 78 8.8
ULT-50S 4700 7.0 - 15.5 5.2 - 11.5 1.8 0.8 8.6 218 3/8 sq. dr. 78 8.8
ULT-60SD 5400 15 - 32 11 - 24 1.9 0.8 9.1 232 1/4 hex dr. 80 10.5
ULT-60S 5400 15 - 32 11 - 24 1.9 0.8 9.0 229 3/8 sq. dr. 80 10.5
ULT-70S 4700 30 - 50 22 - 37 2.1 1.0 9.4 239 3/8 sq. dr. 80 12.3
Inline Shut-Off
Pulse tools are discontinuous drive tools. Because they
deliver torque much differently than continuous drive
tools, ISO/TS 17104 was published in 2004 to suggest
the methods for testing and evaluating hydraulic pulse
tools.
ULT-50S
P
O
W
E
R

T
O
O
L
S
OMEGA PULSE TOOLS: ULT SERI ES
AI MCO / 1 - 800- 852-1 368 1 3 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 1/4" I.D. for ULT-50C Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for ULT-60C - ULT-70CH
MODEL FREE SPEED TORQUE RANGE WEIGHT OVERALL LENGTH SQUARE DRIVE AIR USAGE
rpm Nm ft-lb lb kg in mm in cfm
ULT-50C 4,800 7 - 15.5 5.2 - 11.5 3.0 1.35 9.8 250 3/8 8.6
ULT-60C 5,500 15 - 32 11.1 - 23.7 3.2 1.45 10.3 261 3/8 10.5
ULT-70C 4,600 20 - 35 14.8 - 25.9 3.6 1.65 10.8 275 3/8 12.3
ULT-70CH 2,300 30 - 50 22.2 - 37.0 4.1 1.85 11.4 290 1/2 12.3
Right-Angle Shut-Off
MODEL H C L
in mm in mm in mm
ULT-50C 1.8 45.5 0.625 16 0.469 12
ULT-60C 1.8 45.5 0.625 16 0.469 12
ULT-70C 2.14 54.5 0.703 18 0.625 16
ULT-70CH 2.234 56.5 0.875 22 0.781 20
Dimensions
See also: ERGO-DRIVE
SERIES EXTENSION BARS

on page 108
ULT-50C
P
O
W
E
R

T
O
O
L
S
OMEGA PULSE TOOLS: ULT SERIES
AI MCO / 1 - 800- 852-1 368 1 4 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 3/8" I.D. Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
MODEL FREE SPEED TORQUE RANGE OVERALL LENGTH WEIGHT FROM CENTER TO OUTSIDE SQ. DRIVE NOISE LEVEL AIR USAGE
rpm Nm ft-lb mm in lb kg mm in in dB(A) cfm
UX-T700L 7,500 13 - 26 10 - 19 187 7.3 3.2 1.4 25.5 1.0 3/8 72 10.5
UX-T700 7,500 20 - 38 15 - 28 187 7.3 3.2 1.4 25.5 1.0 3/8 72 10.5
UX-T800 8,300 30 - 45 22 - 33 196 7.7 4.0 1.8 28.0 1.1 3/8 75 12.3
UX-T900 7,000 35 - 70 25 - 50 202 7.9 4.4 2.0 30.0 1.2 1/2 75 16.0
UX-T1000 6,800 50 - 90 36 - 65 207 8.1 5.2 2.3 33.0 1.3 1/2 75 17.6
UX-T1300 6,200 70 - 130 50 - 95 225 8.9 6.2 2.8 36.0 1.4 1/2 79 19.4
UX-T1400 5,300 100 - 160 75 - 115 245 9.6 7.5 3.4 40.0 1.6 1/2 79 21.1
Pistol Shut-Off 3/8" 1/2" Drive
See also: AUDITOR
TM
TORQUE DATA ANALYZER
on page 85
UX-T1400
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
AI MCO / 1 - 800- 852-1 368 1 5 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 3/8" I.D. for UX-T1620 Air Inlet: N.P.T. 1/4" for UX-T1620 NOTE: Torque ranges reflect residual B joint torque values
1/2" I.D. for UXR-T1820 - UXR-T3000S N.P.T. 3/8" for UXR-T1820 - UXR-T2000
N.P.T. 1/2" for UXR-T2400S - UXR-T3000S
Inside Trigger Standard (UXR-T2400S UXR-T3000S)
UX-T1620 5,000 120 - 210 87 - 150 260 10.2 8.1 3.7 40 1.6 3/4 82 22.9
UXR-T1820 4,400 150 - 250 110 - 180 270 10.6 9.9 4.5 42 1.6 3/4 84 24.7
UXR-T2000 4,000 200 - 400 150 - 290 303 11.9 15.0 6.8 47 1.8 3/4 85 34.0
UXR-T2400S 3,600 360 - 650 260 - 470 444 17.5 26.4 12.0 62 2.8 1 85 35.2
UXR-T3000S 4,400 450 - 850 330 - 620 477 18.8 32.0 14.5 62 2.8 1 85 37.1
Shut-Off 3/4" 1" Drive
See also:
AUDITOR
TM
BRUSHLESS ROTARY TRANSDUCERS
on page 87
UXR-T1820
UXR-T2400S
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
AI MCO / 1 - 800- 852-1 368 1 6 AI MCO / 1 - 800- 852-1 368
MODEL FREE SPEED TORQUE RANGE OVERALL LENGTH WEIGHT FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
rpm Nm ft-lb mm in lb kg mm in dB(A) cfm
U-350D 10,500 3.5 - 5.8 2.5 - 4.2 155 6.1 1.6 0.8 22 0.9 74 5.3
UX-450D 9,500 8 - 14 5.8 - 10 151 5.9 1.9 0.8 22 0.9 65 7.0
UX-500D 9,300 13 - 20 10 - 15 152 6.0 1.9 0.8 22 0.9 70 8.8
UX-612D 9,300 16 - 28 12 - 20 164 6.4 2.1 0.9 23 0.9 75 11.2
UX-700D 9,000 20 - 36 16 - 28 174 6.7 3.0 1.4 26 1.0 72 12.3
Pistol Non Shut-Off 1/4" Hex Drive
Air Hose Size: 1/4" I.D. for U-350D - UX-500D Air Inlet Thread: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for UX-612D - UX-700D All Tools Standard with 1/4" Quick Change Chuck
See also: MAG-O-NETS
on page 110
Turn virtually any standard screwdriver bit into a
magnetized bit by simply sliding on a Mag-O-Net
collar.
UX-500D
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
AI MCO / 1 - 800- 852-1 368 1 7 AI MCO / 1 - 800- 852-1 368
U-410 10,500 7 - 10 5.0 - 7.2 177 7.0 2.2 1.0 22 0.9 3/8 70 5.3
UX-450 9,500 9 - 15 6.5 - 11 148 5.8 1.9 0.8 22 0.9 3/8 65 7.0
UX-500 9,300 15 - 25 11 - 19 148 5.8 1.9 0.8 22 0.9 3/8 70 8.8
UX-612 9,300 20 - 35 15 - 25 160 6.3 2.1 0.9 23 0.9 3/8 75 11.2
UX-700 9,000 25 - 45 20 - 35 169 6.5 3.0 1.4 26 1.0 3/8 73 12.3
UX-800 9,000 35 - 60 25 - 45 176 5.9 3.7 1.7 28 1.1 3/8 73 14.1
UX-900 7,600 45 - 75 35 - 55 181 7.1 4.1 1.9 30 1.2 1/2 75 14.9
UX-1000 6,800 50 - 95 40 - 70 187 7.3 4.8 2.2 33 1.3 1/2 75 17.9
UX-1300 6,200 80 - 130 60 - 95 205 8.1 5.9 2.7 36 1.4 1/2 76 19.4
UX-1400 5,300 100 - 160 75 - 120 224 8.7 7.0 3.2 40 1.6 1/2 78 21.1
ALPHA-130 3,400 100 - 160 73 - 118 209 8.2 5.8 2.6 36 1.4 1/2 82 22.9
Pistol Non Shut-Off 3/8" 1/2" Drive
Air Hose Size: 1/4" I.D. for U-410 - UX-500 Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for UX-612 - UX-1400; ALPHA-130
See also: AUDITOR
TM
ROTARY TRANSDUCERS
on page 88
UX-1400
ACRA- PULSE
SERI ES
P
O
W
E
R

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 1 8 AI MCO / 1 - 800- 852-1 368
ALPHA-140 3,100 150 - 230 110 - 169 226 8.9 7.4 3.3 40 1.6 3/4 84 24.7
ALPHA-160 3,700 160 - 270 118 - 198 245 9.6 8.4 3.8 40 1.6 3/4 84 31.7
ALPHA-180 3,500 270 - 350 198 - 258 250 9.8 10.1 4.6 42 1.7 3/4 85 33.6
UX-1620 5,000 120 - 190 90 - 140 241 9.5 7.9 3.6 40 1.6 3/4 82 22.9
UXR-1820 4,600 160 - 250 120 - 185 242 9.5 9.0 4.1 42 1.6 3/4 84 26.3
UXR-2000 4,200 300 - 450 220 - 330 280 11.0 15.0 6.8 47 1.8 3/4 85 31.5
UXR-2000S 4,200 300 - 450 220 - 330 340 13.4 15.4 7.0 47 1.8 3/4 85 31.6
UXR-2400S 4,000 400 - 650 290 - 470 385 15.2 23.7 10.8 55 2.1 1 85 35.2
UXR-3000S 4,400 500 - 850 360 - 630 455 16.6 29.3 13.3 62 2.8 1 85 37.1
Air Hose Size: 3/8" I.D. for UX-1620, ALPHA-140 - ALPHA-160 Air Inlet: N.P.T. 1/4" for UX-1620
1/2" I.D. for UXR-1820 - UXR-3000S, ALPHA-180 N.P.T. 3/8" for UXR-1820, UXR-2000(S), Alpha-180
N.P.T. 1/2" for UXR-2400S - UXR-3000S
NOTE: Torque ranges reflect residual B joint torque values
Torque Control in Left-Hand Rotation Available (UXR-2000 - UXR-3000S)
Inside Trigger Standard (UXR-2000S - UXR-3000S)
Pistol Non Shut-Off 3/4" 1" Drive
Threaded fasteners have been in use for hundreds of
years as a better component than nails, pins, welding or
riveting for holding parts together. Perhaps even more
important is their ability to be removed and reused.
Threaded fasteners are now among the most produced
and used tools in the world with billions being put into
use every day throughout the world.
UXR-1820
UXR-2400S
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
AI MCO / 1 - 800- 852-1 368 1 9 AI MCO / 1 - 800- 852-1 368
U-310SD 11,000 2.5 - 3.1 1.8 - 2.2 222 8.7 1.5 0.6 18 0.7 74 5.3
U-350SD 10,500 3.5 - 5.8 2.5 - 4.2 238 9.4 1.5 0.6 22 0.9 74 5.3
U-410SD 10,500 7 - 10 5 - 7.2 240 9.4 1.8 0.8 22 0.9 69 5.3
UX-450SD 9,500 8 - 14 5.8 - 10 239 9.4 1.8 0.8 22 0.9 69 7.0
UX-500SD 9,300 13 - 20 10 - 15 244 9.6 2.0 0.9 22 0.9 70 8.8
UX-612SD 9,300 16 - 28 12 - 20 253 9.9 2.2 1.0 23 0.9 75 11.1
UX-700SD 9,000 20 - 36 16 - 28 249 9.8 2.8 1.3 27 1.0 78 12.3
ALPHA-60SD 7,000 22 - 35 16 - 25 244 9.6 2.1 0.9 22 0.9 78 15.8
Inline Non Shut-Off 1/4" Hex Drive
Air Hose Size: 1/4" I.D. for U-310SD - UX-500SD NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for UX-612D - UX-700SD, ALPHA-60SD All Tools Standard with 1/4" Quick Change Chuck
Air Inlet: N.P.T. 1/4"
Threaded fasteners act as energy storage devices
during and after the tightening process. As an active
member of the joint they stretch as tensile force is
applied and store potential energy. This stored energy
results in clamp-load within the joint.
ALPHA-60SD
UX-700SD
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
AI MCO / 1 - 800- 852-1 368 20 AI MCO / 1 - 800- 852-1 368
U-410S 10,500 7 - 10 5.0 - 7.2 239 9.4 1.8 0.8 22 0.9 3/8 70 5.3
UX-450S 9,500 9 - 15 6.5 - 11 233 9.2 1.8 0.8 22 0.9 3/8 67 7.0
UX-500S 9,300 15 - 25 11 - 19 239 9.4 2.0 0.9 22 0.9 3/8 70 8.8
UX-612S 9,300 20 - 35 15 - 25 248 9.8 2.2 1.0 23 0.9 3/8 75 11.1
UX-700S 9,000 25 - 45 20 - 35 244 9.6 2.8 1.3 27 1.0 3/8 78 12.3
UX-800S 9,000 35 - 60 25 - 45 250 9.8 3.2 1.5 36 1.4 3/8 75 14.2
UX-900S 7,600 45 - 75 35 - 55 310 12.2 3.9 1.8 38 1.4 1/2 75 14.9
UX-1000S 6,800 50 - 95 40 - 70 320 12.6 4.6 2.1 39 1.4 1/2 75 17.6
UX-1300S 6,200 80 - 130 60 - 95 336 13.2 6.6 2.5 42 1.3 1/2 79 19.4
Air Hose Size: 1/4" I.D. for U-410S - UX-500S Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for UX-612S - UX-1300S
Inline Non Shut-Off 3/8" 1/2" Drive
Threaded joints are classified by their stiffness or joint
rate. A hard joint is one that measures less than 30
degrees of rotation from snug to final torque. A medium
joint measures 31 719 degrees of rotation from snug
to final torque, while a soft joint measures 720 degrees
or more.
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
UX-700S
AI MCO / 1 - 800- 852-1 368 21 AI MCO / 1 - 800- 852-1 368
Air Hose Size: 1/4" I.D. for UX-500C Air Inlet: N.P.T. 1/4" NOTE: Torque ranges reflect residual B joint torque values
3/8" I.D. for UX-612C - UX-1000C
MODEL FREE SPEED TORQUE RANGE WEIGHT OVERALL LENGTH SQ. DRIVE NOISE LEVEL AIR USAGE
rpm Nm ft-lb lb kg mm in in dB(A) cfm
UX-500C 9,300 13 - 20 10 - 15 2.8 1.3 270 10.6 3/8 82 8.8
UX-612C 9,800 16 - 28 12 - 20 3.0 1.4 283 11.1 3/8 85 11.2
UX-700C 9,500 20 - 36 16 - 28 3.7 1.7 275 10.8 3/8 85 12.3
UX-800C 9,000 29 - 43 20 - 31 4.3 1.9 285 11.2 3/8 85 14.1
UX-900C 7,600 35 - 55 25 - 40 5.0 2.2 338 13.3 3/8 90 14.9
UX-1000C 6,800 50 - 80 40 - 58 6.8 3.1 365 14.3 1/2 90 17.9
UX-612A 9,800 16 - 28 12 - 20 3.0 1.4 297 11.7 3/8 85 10.5
MODEL C H
mm in mm in
UX-500C 15.0 .59 59.5 2.34
UX-612C 16.0 .64 59.5 2.34
UX-700C 16.0 .64 62.0 2.45
UX-800C 18.0 .72 70.0 2.77
UX-900C 18.0 .72 70.0 2.45
UX-1000C 21.5 .81 79.0 3.13
H
C
Dimensions
Angle 3/8" 1/2" Drive
Snug Point is the point during tightening when all joint
components have come into contact, either directly or
indirectly, and any additional torque will lead to fastener
elongation. It is also the point from which the angle of
rotation for joint rate is measured.
P
O
W
E
R

T
O
O
L
S
ACRA- PULSE
SERI ES
UX-700C
AI MCO / 1 - 800- 852-1 368 22 AI MCO / 1 - 800- 852-1 368
UX-ST800 7,300 35 - 55 25 - 40 195 7.7 3.8 1.7 28 1.1 75 10.5
UX-ST1000 6,300 50 - 90 40 - 65 210 8.3 5.5 2.5 33 1.3 75 16.8
Auto Reversing
SEE ALSO: ERGONOMIC TWIST PLUGS
on page 105
These unique, ergonomically designed hose fittings
provide 360 rotation and 35 angled rotation in any
direction.
A31/4P20 1/4-20" 55 2.17 3/8
A305P0.8 M5 42 1.65 3/8
A41/4P20 1/4-20" 65 2.59 1/2
A406P1.0 M6 50 1.97 1/2
Additional sizes of stud bolt sockets are available upon request.
PART NO THREAD LENGTH LENGTH DRIVE
SIZE MM IN IN
See Also: STUD BOLT SOCKETS
P
O
W
E
R

T
O
O
L
S
STUD BOLT SERI ES
UX-ST1000
AI MCO / 1 - 800- 852-1 368 23 AI MCO / 1 - 800- 852-1 368
SLEEVE
RECESSED
SQUARE DRIVE
EXTENSION
ERGO-DRIVE
STANDARD
ERGO-DRIVE
VS. STANDARD
STANDARD EXTENSION ERGO-DRIVE
Ergo-Drive
sockets
Protect...
. . . YOUR I NVESTMENT!
Pulse tools are an investment and the anvil is the most expensive
single part of any pulse tool. ERGO-DRIVE
sockets mean less

vibration and wear on this critical component.
. . . YOUR WORKERS!
ERGO-DRIVE
sockets cause significantly less vibration during

fastening than conventional sockets. This allows your workers to do
their jobs without the worry of vibration-related injuries.
107
113
101
109
113
120
X Y
AXI S DI RECTI ON
Z
85
90
95
100
105
110
115
120
125
VIBRATION LEVEL
db(VL)
CONVENTI ONAL SOCKET ERGO- DRI VE SOCKET
. . . YOUR PRODUCTS!
By reducing run-out and vibration, ERGO-DRIVE
sockets allow the

most repeatable, accurate rundowns to take place, ensuring excellent
product quality.
% TORQUE LOSS USI NG ULT- 70 ( SET AT 45Nm)
7%
29%
3. 5%
18%
2%
12%
150 MM
ERGO DRIVE
STANDARD
100 MM
ERGO DRIVE
STANDARD
75 MM
ERGO DRIVE
STANDARD
EXTENSION
LENGTHS

O-RING retaining
insert maximizes
secure fit to your
pulse tool.
ULT-70
See page 109 for part numbers and specifications
Cross Section
Cross Section
P
O
W
E
R

T
O
O
L
S
ERGO-DRI VE
SERI ES
AI MCO / 1 - 800- 852-1 368 24 AI MCO / 1 - 800- 852-1 368
DI RECT DRI VE
Air motor directly drives the gears
Stall torque dependent on air pressure
Simple maintenance
Lightest and smallest
air screwdriver
Good for soft draw
applications such as
wood screws,
self-tapping screws,
or trim screws
TORQUE CONTROL
AUTOMATI C SHUT-OFF TYPE
Precise repeatability to improve quality
Very little wear on internal parts for long life
Quick shut-off for minimum torque reaction
Choices of speeds for flexibility
External simple torque adjustment
Midrange air motor provides high speed during entire
cycle
Best choice for industrial torque control applications
POSI TI VE CLUTCH TYPE
Good for varying torque applications
Clutch ratchets at preset torque
Operator can force clutch engagement for higher
torque
Good for prevailing torque applications
I MPACT TYPE
High power-to-weight ratio
Fast cycles times with free speeds up to 16,000 rpm
Great for non-critical applications
HAMMER CAGE
HAMMER
ANVIL
HAMMER
CAM
r
r Cage
CUSHI ON CLUTCH TYPE
Good general duty screwdriver
High speed rundown
Clutch ratchets at preset torque
Internal torque adjustment
General assembly, wood and sheet metal screws
Only 12% of tightening energy is used to create clamp
load in a joint. The other 88% of the tightening energy is
consumed by friction of the threads and fastener head
mating with the joint components.
P
O
W
E
R

T
O
O
L
S
SCREWDRI VERS: OVERVIEW
AI MCO / 1 - 800- 852-1 368 25 AI MCO / 1 - 800- 852-1 368
Each model is equipped with its standard and alternate clutch springs.
Additional clutch springs specifications to provide the full torque range of each model on page 28.
Air Hose Size: 1/4" I.D. for US-LT10B - US-LT40B Series Air Inlet: 1/8" for US-LT10B - US-LT20B Series
3/8" I.D. for US-LT50B Series
1/4" for US-LT30B - US-LT50B Series
See also: AUET/MTM DESKTOP TESTERS
on page 84
MODEL TORQUE RANGE FREE SPEED OVERALL LENGTH WEIGHT FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
Nm in-lb rpm mm in lb kg mm in dB(A) cfm
US-LT10B 0.20 - 0.60 1.8 - 5.3 1,000 190 7.5 0.6 0.3 12 0.5 75 5.2
US-LT20B-10 0.15 - 1.10 1.3 - 9.7 1,000 180 7.1 0.7 0.3 13 0.5 70 5.6
US-LT20B-18 0.15 - 0.70 1.3 - 6.2 1,800 180 7.1 0.7 0.3 13 0.5 70 5.6
US-LT20B-26 0.15 - 0.35 1.3 - 3.1 2,600 180 7.1 0.7 0.3 13 0.5 70 5.6
US-LT30B-11 0.40 - 2.10 3.5 - 18.5 1,100 187 7.2 0.9 0.4 16 0.6 70 7.0
US-LT30B-17 0.40 - 1.50 3.5 - 13.0 1,700 187 7.2 0.9 0.4 16 0.6 70 7.0
US-LT30B-23 0.40 - 1.00 3.5 - 8.7 2,300 187 7.2 0.9 0.4 16 0.6 71 7.0
US-LT40B-08 1.00 - 4.00 8.7 - 34.7 800 209 8.2 1.4 0.6 17 0.6 70 10.5
US-LT40B-15 1.00 - 2.20 8.7 - 19.1 1,500 209 8.2 1.4 0.6 17 0.6 70 10.5
US-LT40B-21 1.00 - 1.70 8.7 - 14.8 2,100 209 8.2 1.4 0.6 17 0.6 74 10.5
US-LT50B-05 1.50 - 10.50 13.2 - 92.4 480 240 9.4 2.2 1.0 20 0.8 74 17.5
US-LT50B-08 1.50 - 5.50 13.2 - 48.4 800 240 9.4 2.2 1.0 20 0.8 75 17.5
US-LT50B-17 1.50 - 2.50 13.2 - 23.0 1,700 240 9.4 2.2 1.0 20 0.8 75 17.5
Torque Control Light Touch (LT) Series Push-to-Start Type Inline
1
2
3
5
6
7
4
Tool Hanger
Muffled Exhaust
Push Button Lockable Reverse
Foam Grip
Standard with all models
Simple Torque Adjustment
Compact Bit Holder
Thousands of Bits and Sockets available
Contact AIMCO for more information
1
2
3
4
5
6
7
P
O
W
E
R

T
O
O
L
S
PNEUMATI C SCREWDRI VERS
US-LT30B-11
US-LT50B
AI MCO / 1 - 800- 852-1 368 26 AI MCO / 1 - 800- 852-1 368
Angle Head Height: 32 - 36mm Air Inlet: N.P.T. 1/4" Air Hose Size: 1/4" I.D. for all models
MODEL TORQUE RANGE FREE OVERALL WEIGHT FROM CENTER HEX BIT OR NOISE AIR
(SOFT JOINT) SPEED LENGTH TO OUTSIDE DRIVE SIZE LEVEL USAGE
Nm in-lb rpm mm in lb kg mm in in dB(A) cfm
ANGLE
US-LT30B-11C 0.39 - 2.10 3.5 - 18.5 1,100 298 10.7 1.5 0.7 10 0.4 1/4 73 7.0
US-LT30B-17C 0.39 - 1.50 3.5 - 13.2 1,700 295 10.7 1.5 0.7 10 0.4 1/4 73 7.0
US-LT40B-05C 2.26 - 5.60 20.0 - 49.5 500 322 13.0 2.1 0.9 13 0.5 1/4 75 10.5
US-LT40B-08C 0.98 - 3.92 8.7 - 34.7 800 320 12.8 2.0 0.9 10 0.4 1/4 75 10.5
US-LT40B-15C 0.98 - 2.20 8.7 - 19.4 1,500 320 12.8 2.0 0.9 10 0.4 1/4 75 10.5
US-LT40-03C 4.90 - 9.80 43.4 - 86.8 300 360 14.2 2.4 1.1 13 0.5 1/4 Sq. 72 10.5
US-LT40-05C 2.26 - 5.70 20.0 - 50.2 500 322 13.0 2.1 0.9 13 0.5 1/4 Sq. 75 10.5
US-LT40-08C 0.98 - 3.92 8.7 - 34.7 800 320 12.8 2.0 0.9 10 0.4 1/4 Sq. 75 10.5
US-LT40-15C 0.98 - 2.06 8.7 - 18.2 1,500 320 12.8 2.0 0.9 10 0.4 1/4 Sq. 75 10.5
LEVER
US-LT30BL-11 0.39 - 2.10 3.5 - 18.5 1,100 229 8.2 1.2 0.5 15 0.6 1/4 70 7.0
US-LT30BL-17 0.39 - 1.47 3.5 - 13.0 1,700 229 8.2 1.2 0.5 15 0.6 1/4 70 7.0
US-LT30BL-23 0.39 - 0.98 3.5 - 8.7 2,300 229 8.2 1.2 0.5 15 0.6 1/4 71 7.0
US-LT40BL-08 0.98 - 4.00 8.7 - 35.2 800 249 9.1 1.5 0.7 17 0.7 1/4 70 10.5
US-LT40BL-15 0.98 - 2.20 8.7 - 19.4 1,500 249 9.1 1.5 0.7 17 0.7 1/4 70 10.5
US-LT40BL-21 0.98 - 1.70 8.7 - 15.0 2,100 249 9.1 1.5 0.7 17 0.7 1/4 74 10.5
Torque Control Light Touch (LT) Series Angle and Lever
See also: AUDITOR
TM
TORQUE CUBE
TM
on page 83
P
O
W
E
R

T
O
O
L
S
US-LT30BL SERIES
US-LT40BL SERIES
US-LT30B-11C
AI MCO / 1 - 800- 852-1 368 27 AI MCO / 1 - 800- 852-1 368
Each model is equipped with its standard and alternate clutch springs. Additional clutch springs specifications are available on page 28.
(P) DENOTES 3/8" SQ. DRIVE FOR US-LT60P SERIES.
Air Hose Size: 1/4" I.D. for US-LT31PB & US-LT41PB Series Air Inlet: N.P.T. 1/4"
3/8" I.D. for US-LT31PB-05, US-LT51PB Series & US-LT60P Series
MODEL TORQUE RANGE FREE OVERALL WEIGHT FROM CENTER NOISE AIR
(SOFT JOINT) SPEED LENGTH TO OUTSIDE LEVEL USAGE
US-LT31PB-05 1.0 - 5.0 8.8 - 44.0 500 189 7.3 1.9 0.8 16.0 0.6 70 7.0
US-LT31PB-11 0.4 - 2.1 3.5 - 18.5 1,100 170 6.7 1.6 0.7 15.5 0.6 70 7.0
US-LT31PB-17 0.4 - 1.5 3.5 - 13.2 1,700 170 6.7 1.6 0.7 15.5 0.6 70 7.0
US-LT31PB-23 0.4 - 1.0 3.5 - 8.8 2,300 170 6.7 1.6 0.7 15.5 0.6 70 7.0
US-LT41PB-08 1.0 - 3.9 8.8 - 34.7 800 175 7.0 1.8 0.8 16.5 0.6 70 10.5
US-LT41PB-15 1.0 - 2.2 8.8 - 19.4 1,500 175 7.0 1.8 0.8 16.5 0.6 70 10.5
US-LT41PB-21 1.0 - 1.7 8.8 - 15.0 2,500 175 7.0 1.8 0.8 16.5 0.6 74 10.5
US-LT51PB-05 1.5 - 10.5 13.2 - 91.2 480 198 8.4 2.6 1.2 19.5 0.7 74 17.5
US-LT51PB-08 1.5 - 5.5 13.2 - 48.4 800 198 8.4 2.6 1.2 19.5 0.7 75 17.5
US-LT51PB-17 1.5 - 2.6 13.2 - 23.0 1,700 198 8.4 2.6 1.2 19.5 0.7 75 17.5
US-LT60P-03(P) 7.0 - 20.0 61.6 - 176.0 320 230 9.0 3.7 1.7 22.0 0.9 75 21.0
US-LT60P-07(P) 4.0 - 10.0 35.2 - 88.0 650 230 9.0 3.7 1.7 22.0 0.9 76 21.0
US-LT60P-11(P) 4.0 - 7.0 35.2 - 61.6 1,100 230 9.0 3.7 1.7 22.0 0.9 77 21.0
Torque Control Light Touch (LT) Series Pistol
See also: LINE REEL BALANCERS
on page 99
P
O
W
E
R

T
O
O
L
S
Torque Reaction Bar standard
with US-LT60P Series
US-LT31PB
SERIES
AI MCO / 1 - 800- 852-1 368 28 AI MCO / 1 - 800- 852-1 368
Optional Clutch Springs
MODEL CLUTCH SPRINGS RECOMMENDED TORQUE RANGE CLUTCH SPRING
PROVIDED HARD JOINT CODE NUMBER
Standard Option Nm in-lb
US-LT10/10B Black 0.20 - 0.60 1.7 - 5.2 976-379-0
US-LT20B-10 Black 0.34 - 1.10 3.0 - 9.5 976-432-0
Red 0.20 - 0.70 1.7 - 6.1 976-431-0
Yellow 0.15 - 0.34 1.3 - 3.0 976-430-0
US-LT20B-18 Red 0.24 - 0.67 2.2 - 6.1 976-431-0
Yellow 0.15 - 0.34 1.3 - 3.0 976-430-0
US-LT20B-26 Yellow 0.15 - 0.34 1.3 - 3.0 976-430-0
US-LT31PB-05 Red 2.35 - 5.00 20.9 - 44.0 976-493-0
Pink 0.98 - 2.74 8.7 - 24.3 976-471-0
US-LT30 Series, 1100 rpm Blue 0.98 - 2.1 8.7 - 18.5 976-472-0
Red 0.67 - 1.76 6.1 - 15.6 976-493-0
Pink 0.39 - 0.98 3.5 - 8.7 976-471-0
Black (not included) 1.22 - 2.74 10.8 - 24.3 976-504-0
US-LT30 Series, 1700 rpm Red 0.67 - 1.47 6.1 - 13.0 976-493-0
Pink 0.39 - 0.98 3.5 - 8.7 976-471-0
US-LT30 Series, 2300 rpm Pink 0.39 - 0.98 3.5 - 8.7 976-471-0
US-LT40-03C Red 4.90 - 9.80 43.4 - 86.8 976-516-0
US-LT40 Series, 800 rpm Black 1.57 - 3.92 13.9 - 34.7 976-515-0
Red 0.98 - 2.17 8.7 - 19.1 976-516-0
Yellow 0.98 - 1.67 8.7 - 14.8 976-517-0
Yellow 0.98 - 1.67 8.7 - 14.8 976-517-0
US-LT40 Series, 2100 rpm Yellow 0.98 - 1.67 8.7 - 14.8 976-517-0
US-LT50 Series, 500 rpm Black 4.9 - 10.3 43.4 - 91.1 976-620-0
Red 2.9 - 5.4 26.1 - 47.7 976-614-0
Yellow 1.4 - 2.5 13.0 - 22.6 976-588-0
Yellow 1.4 - 2.5 13.0 - 22.6 976-588-0
US-LT50 Series, 1700 rpm Yellow 1.4 - 2.6 13.0 - 23.0 976-588-0
External Torque Adjustment (Air Shut-off)
MODEL DIRECT TYPE LEADER HOSE EXHAUST HOSE
SILENCER ASSEMBLY ASSEMBLY
US-LT10 Series N/A 934-201-0 459-885-1
US-LT20 Series 455-088-2 934-201-0 455-885-1
US-LT30 Series 408-088-2 934-150-0 408-885-0
US-LT40 Series 496-088-1 934-150-0 496-885-1
Silencer Assemblies
Set the hand driver through the slot
into the key hole on the Adjusting
Gear and turn clockwise to increase
torque and counter clockwise to
decrease.
See Also: AIMCO AIR HOSE
on page 105
Durable polyurethane hose
Excellent recoil memory
Assemblies include reusable swivel fitting
Straight hose is available by the foot with or without hose fittings
P
O
W
E
R

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 29 AI MCO / 1 - 800- 852-1 368
See also: TW-SERIES BALANCERS
on page 98
Air Hose Size: 1/4" I.D. Air Inlet: N.P.T. 1/4"
MODEL MAX. TORQUE FREE SPEED OVERALL LENGTH WEIGHT FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
SOFT JOINT HARD JOINT
Nm ft-lb Nm ft-lb rpm mm in lb kg mm in dB(A) cfm
PISTOL
US-LD40P-08 4.8 3.6 5.2 4.2 940 130 5.1 1.5 0.7 17 0.7 70 14.0
US-LD40P-15 3.0 2.2 3.2 2.4 1,700 130 5.1 1.5 0.7 17 0.7 70 14.0
US-LD40P-21 2.0 1.5 2.8 2.1 2,500 130 5.1 1.5 0.7 17 0.7 74 14.0
US-LD50P-05 10.0 7.4 11.2 8.3 500 153 6.1 2.0 0.9 20 0.8 74 17.5
US-LD50P-08 6.5 4.8 7.8 5.8 900 153 6.1 2.0 0.9 20 0.8 75 17.5
US-LD50P-17 3.5 2.6 5.9 4.4 1,900 150 5.9 2.0 0.9 20 0.8 75 17.5
ANGLE
US-3.5ACB 1.2 10.6 2.4 21.6 2,000 236 9.3 1.4 0.6 10.0 0.4 85 7.0
Direct Drive Series
FEATURES
Lightest air driver
Perfect for woodscrews and trim screws
Fewest parts
US-LD40P SERIES
US-3.5ACB
US-LD50P SERIES
P
O
W
E
R

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 30 AI MCO / 1 - 800- 852-1 368
* Push-To-Start Air Hose Size: 1/4" I.D. for all models Air Inlet: N.P.T. 1/4"
MODEL TORQUE RANGE FREE SPEED OVERALL LENGTH WEIGHT LESS BIT FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
US-3.5PB 1.1 - 2.5 10 - 22 2,000 200 7.9 1.6 0.7 17 0.7 75 7.0
US-3.5B 1.2 - 2.5 11 - 22 2,000 214 8.4 1.4 0.6 17 0.7 75 7.0
US-5 3.4 - 7.7 30 - 68 1,400 258 10.1 2.4 1.1 21 0.8 75 7.0
US-50* 3.9 - 7.7 35 - 68 1,200 245 9.6 2.0 0.9 18 0.7 76 10.7
Cushion Clutch Series
FEATURES
Industrial Driver
Adjustable Torque
See Also: FASTENER TOOLS
on page 107
P
O
W
E
R

T
O
O
L
S
US-3.5PB
US-50
US-3.5B
US-5
AI MCO / 1 - 800- 852-1 368 31 AI MCO / 1 - 800- 852-1 368
*Recommended air pressure for US-350PW & US-450WB: 57 psi NOTE: Additional models available. Please contact AIMCO.
(R) Denotes Directional Muffled Rear Exhaust option
Air Hose Size: 1/4" I.D. for US-350PW, US-450WB & US-652PW Air Inlet: N.P.T. 1/4"
3/8" I.D. for UW-6 Series
MODEL TORQUE RANGE FREE SPEED OVERALL LENGTH WEIGHT LESS BIT FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
PISTOL
US-350PW* 4.2 - 8.3 3.1 - 6.1 16,000 121 4.8 1.2 0.5 17 0.7 82 7.0
US-652PW* 7.1 - 12.1 5.2 - 8.9 9,300 155 6.1 1.9 0.8 23 0.9 78 8.8
UW-6SL(R)DK 5.7 - 15 4.2 - 11.1 8,500 165 6.5 2.2 1.0 22 0.8 90 10.5
UW-61E(R)DK 14 - 60 10.3 - 44.2 7,500 150 5.3 3.6 1.6 30 1.2 92 12.4
STRAIGHT
US-450WB* 3.2 - 7.2 2.4 - 5.3 11,000 161 6.3 1.2 0.5 19 0.7 80 7.0
UW-6SSH(R)DK 16 - 36 11.8 - 26 7,300 265 10.4 2.8 1.3 24 0.9 91 12.4
Impact Series
UW-6SL(R)DK
See also: TOOL BASKET
on page 103
FEATURES
Powerful air driver
High speed
Twin hammer
Compact size
P
O
W
E
R

T
O
O
L
S
US-450WB
UW-6SSH(R)DK
NOTE: Additional models are available. Please contact AIMCO.
AI MCO / 1 - 800- 852-1 368 32 AI MCO / 1 - 800- 852-1 368
ELECTRA SERI ES
Available in Push-To-Start and Lever Start styles.
Ergonomic Design Lightweight, compact
housings ensure operator comfort during operation.
Accurate Torque Control Precise controlled
fastening with automatic shut-off clutches.
External Brush Replacement Virtually no down
time for brush replacement.
External Torque Adjustment Torque level can be
easily adjusted by simply turning the external
adjustment ring.
UL Listed and CE Certified Drivers meet
electrical safety standards in both the U.S. and
Europe.
Direct Plug-In Style
Offers easy and convenient
start-up (certain models)...
just plug it in!
State-of-the-Art Motor Design Ensures
comfortable grip temperature for operator comfort
and extended motor life.
ELECTRA LOW ESD SERI ES
Grounded Bit Grounded chuck assembly routes any
existing charge to ground.
Carbonized Housing Handle material and buttons
are constructed of carbonized plastic throughout,
enabling any charge received by the handle to be routed
to ground.
Long-Lasting ESD Resistant Handle Material will
maintain its integrity for the life of the handle, unlike
coatings or paints.
PRECI SI ON SERI ES
FOR LOW TORQUE APPLI CATI ONS
Featuring ergonomic design in shape and materials and
options such as long-life brushless motors or adjustable
speed power supplies.
STANDARD MODELS
Optional Speed Control Power Supply Enables
infinite control from 20% to 100% of maximum
tool speed and adjustable soft start to lessen cross
threading
Ergonomic Housing Oval shape conforms to
hand
Duralite New casing material for a secure grip
Integrated Lever Feather-touch integrated lever
reduces travel and stress. Requires only 2 mm of
travel to activate.
External Torque Control Just twist and go
ELECTRA SLI P CLUTCH SERI ES
High-Speed Performance For quick and consistent
assembly and disassembly.
Maximum Ergonomics and Convenience Offers a
combination of a slip clutch with a high speed motor to
provide low torque reaction and one of the best power-
to-weight ratios in the industry.
Added Maintenance Feature An LED light notifies
the operator when to change brushes. Brush cap contains
a switch which shuts off the power during brush
replacement.
Direct 110V Plug-In Eliminates the need for an
external power supply.
1/4" Hex Quick Change Chuck For easy
bit changes.
External Torque Collar For easy torque adjustment.
EXTENDED LI FE MODELS
Sealed Swiss Motor For higher duty cycles, longer life,
and less maintenance. Sealed casing means no brush
changes are necessary!
Extended Warranty on tool motor Three year standard
motor warranty
Compact Power Supply Makes setup a breeze
P
O
W
E
R

T
O
O
L
S
ELECTRIC SCREWDRI VERS: OVERVI EW
AI MCO / 1 - 800- 852-1 368 33 AI MCO / 1 - 800- 852-1 368
1
220V AC is available upon request
2
Low voltage units require an external power supply. Please see page 36 for applicable units.
3
AE-5681 includes a torque cover
4
AE-8681 includes a pistol grip handle adapter
MODEL TORQUE RANGE FREE SPEED WEIGHT LENGTH HEX DRIVE POWER SOURCE
in-lb kgf-cm rpm lb kg in mm in mm
PUSH-TO-START DIRECT PLUG-IN SERIES
AE-5681
3
3 - 17 3.4 - 19.5 1,000 1.2 0.5 9.3 237 1/4 6.4 115V AC
1
AE-8681
4
15 - 45 23.0 - 51.8 600 1.6 0.7 10.6 269 1/4 6.4 115V AC
1
LOW VOLTAGE LEVER START SERIES
2
POWER SUPPLY:
AE-2020B .35 - 1.3 .40 - 1.5 720 0.7 0.3 8.0 203 1/4 6.4 See top
AE-4020 .5 - 5.5 .58 - 6.4 720 0.7 0.3 8.0 203 1/4 6.4 of page 36
AE-4520 1.3 - 8.2 1.5 - 9.4 720 0.7 0.3 8.0 203 1/4 6.4 for required
AE-7010 6.1 - 17.4 7.0 - 20.0 750 1.4 0.6 9.3 236 1/4 6.4 power supplies
2
AE-8010 10.4 - 26.0 12.0 - 29.9 550 1.4 0.6 9.3 236 1/4 6.4
LOW VOLTAGE PUSH-TO-START SERIES
2
POWER SUPPLY:
AE-7010PS 6.1 - 17.4 7.0 - 20.0 750 1.4 0.6 9.3 236 1/4 6.4 See page 36 for
AE-8010PS 10.4 - 26.0 12.0 - 29.9 550 1.4 0.6 9.3 236 1/4 6.4 power supplies
2
Electra Series
See also: ANGLE HEAD ACCESSORIES
on page 36
P
O
W
E
R

T
O
O
L
S
ELECTRIC SCREWDRI VERS
AE-4520
AE-8681
AI MCO / 1 - 800- 852-1 368 34 AI MCO / 1 - 800- 852-1 368
MODEL TORQUE RANGE FREE SPEED WEIGHT LENGTH HEX DRIVE POWER SOURCE
AE-5681ESD 3 - 17 3.4 - 19.5 1,000 1.2 0.5 9.3 237 1/4 6.4 115V AC
1
AE-4520ESD
2
1.3 - 8.2 1.5 - 9.4 720 0.9 0.4 8.0 204 1/4 6.4 35V DC
Electra Low ESD Series
1
2
Low voltage units require an external power supply. Please see page 36 for applicable units.
MODEL RECOMMENDED TORQUE RANGE FREE SPEED WEIGHT LENGTH HEX DRIVE POWER SOURCE
AE-2015 2.0 - 15.0 2.3 - 18.0 1000 1.2 .55 9.2 234 1/4 6.4 110V/120VAC
1
Electra Slip Clutch Series
1
EPA
Safe for Electrostatic Discharge (ESD)
See Also: ASB-SERIES BALANCERS
on page 98
Built-in Safety Features
Ergonomic Spring Release
Extended Cable Length
AE-5681ESD
P
O
W
E
R

T
O
O
L
S
AE-4520ESD
AI MCO / 1 - 800- 852-1 368 35 AI MCO / 1 - 800- 852-1 368
MODEL TORQUE RANGE FREE SPEED WEIGHT LENGTH HEX DRIVE
in-lb kgf-cm rpm lb kg in mm in
STANDARD
AE-6300 .85 - 5.0 1.0 - 5.8 725 0.9 0.4 8.5 216 1/4
AE-6450 1.3 - 8.7 1.5 - 10.0 770 0.9 0.4 8.5 216 1/4
HIGH SPEED
AE-6300S 1.2 - 5.5 1.4 - 6.3 920 0.9 0.4 8.5 216 1/4
AE-6450S 1.3 - 8.7 1.5 - 10.0 920 0.9 0.4 8.5 216 1/4
EXTENDED LIFE
AE-6300M 1.0 - 5.5 1.1 - 6.3 550 0.9 0.4 8.5 216 1/4
Precision Series
MODEL FEATURE DIMENSIONS WEIGHT
in mm lb kg
STANDARD AND HIGH SPEED
AE-24PS Standard PS 2.6 x 1.6 x 5.0 66 x 14 x 127 1.0 0.5
AE-2045DPS Dual Power Supply 4.6 x 3.7 x 7.8 117 x 94 x 198 7.0 3.2
APS-35W Variable Speed / Soft Start 2.6 x 1.6 x 5.0 66 x 14 x 127 1.0 0.5
EXTENDED LIFE
APM-30 Extended Life PS 2.1 x 3.4 x 1.9 53 x 87 x 48 0.4 0.2
Power Supplies
See also: SCREW PRESENTERS
on page 95
P
O
W
E
R

T
O
O
L
S
AE-6300
AI MCO / 1 - 800- 852-1 368 36 AI MCO / 1 - 800- 852-1 368
P
O
W
E
R

T
O
O
L
S
AE-24PS and AE-78PS APS-35W AE-7080PS AE-2045DPS
MODEL COMPATIBLE TOOL VOLTAGE DIMENSIONS WEIGHT
SCREWDRIVERS rpm CONVERSION lb kg
AE-24PS
AE-2020B AE-6300
720 110V AC / 35V DC 1.0 .45
AE-4020 AE-6300S 2.6 x 1.6 x 5.0"
AE-4520 AE-6450 66 x 41 x 127 mm
AE-4520ESD AE-6450S
AE-2045D
AE-2020B AE-6300
110V AC / 35V DC 7.0 3.2
AE-4020 AE-6300S 500 or 720 4.6 x 3.7 x 7.8"
AE-4520 AE-6450 Switchable 117 x 94 x 198 mm
AE-4520ESD AE-6450S
APS-35
AE-2020B AE-6300
Variable
110V AC / 35V DC 1.0 0.5
AE-4020 AE-6300S
Speed
2.6 x 1.6 x 5.0"
AE-4520 AE-6450
Soft Start
66 x 14 x 127 mm
AE-4520ESD AE-6450S
AE-78PS
AE-7010 AE-8010
Standard 110V AC / 30V DC
1.6 x 5.0 x 2.6"
1.0 .45
AE-7010PS AE-7010 41 x 127 x 66mm
AE-7080PS
AE-7010PS AE-7010
Standard 110V AC / 30V DC
4.6 x 3.7 x 7.8"
7.0 3.2
AE-8010PS AE-8010 117 x 94 x 198 mm
APM-30 AE-6300M 550 110V AC / 35V DC
2.1 x 3.4 x 1.9"
0.4 0.2
53 x 87 x 48 mm
Electra Series Accessories Power Supplies
PISTOL GRIP HANDLE
Converts to a pistol style driver for
horizontal fastening. Available for
Trigger Start only (included with
AE-8681).
TORQUE COVER
Prevents accidental torque
adjustment by the operator
(included with AE-5681).
ANGLE HEAD ATTACHMENTS
Available for lever start series.
Part # AE-2045A or AE-7080A.
Not available on Low ESD Series.
FASTENER COUNTER
Verifies and error-proofs assembly
process.
ITEM MODEL COMPATIBLE SCREWDRIVERS
Angle Head Attachments
AE-2045A For AE-2020B, AE-4020, AE-4520
AE-7080A For AE-7010, AE-8010
Pistol Grip Handle AE-PG7080 For AE-7010, AE-1070PS, and AE-8010
AE-TC2045 For AE-2020B, AE-4020, AE-4520
Torque Cover AE-TC7080 For AE-7010, AE-7010PS, AE-8010
4H2055 For AE-8681
Fastener Counter
TM-45 For AE-2020, AE-4020, AE-4520 Standard and ESD types
TM-65 For AE-7010, AE-8010 and AE-8010PS
Optional Accessories
AI MCO / 1 - 800- 852-1 368 37 AI MCO / 1 - 800- 852-1 368
P
O
W
E
R

T
O
O
L
S
UOW SERI ES OPEN- END NUTRUNNERS
Designed for tubenut fastening, the UOW Series can transfer torque
through a variety of options.
Stall Type Depending on the application requirements, the
standard UOW Series will stall when torque resistance matches
power output.
Mechanical Shut-off Type For greater torque accuracy and less
reaction impulse to the operator, the UOW-T Series incorporates
a mechanical clutch to shut off the tool at the preset torque.
Electronically Monitored Type For critical torque applications
requiring monitoring or controlling of the fastening torque, the
UOW-M Series utilizes a transducer to signal the clutch shut-off.
UOW series incorporates a one-hand, two-step throttle, which
automatically reverses the socket to a preset open position.
URW SERI ES I N- LI NE RATCHET WRENCHES
Designed to set flush over the fastener head, the URW Series is
ideal for narrow fastening spaces. Motor torque is transferred from a
gear-driven, dual lobed cam that pushes a spring loaded push rod,
rotating the socket one tooth at a time. A wide variety of socket
sizes, head thicknesses and tool lengths allow the URW Series access
to many difficult applications.
UAN SERI ES ANGLE NUTRUNNERS
Torque Control
Electronically Monitored or Controlled Type
Designed for fastening in tight quarters or applications not served
well by a pulse tool. The UAN Series transfers torque through
beveled angle gears, continuously driving the fastener. When the
resistance to rotation overcomes the spring resistance on the clutch,
the tool will disengage at the adjusted torque value. Low reaction
force characteristics on hard joints make it comfortable for the
operator to use. Ideal for applications ranging from 6-60 Nm
(4 44 ft-lbs).
NUTRUNNERS: OVERVI EW
AI MCO / 1 - 800- 852-1 368 38 AI MCO / 1 - 800- 852-1 368
MODEL FREE OVERALL ANGLE HEAD FROM CENTER WEIGHT LESS SQUARE NOISE AIR
TORQUE RANGE SPEED LENGTH HEIGHT TO OUTSIDE SOCKET DRIVE LEVEL USAGE
Nm ft-lb rpm mm in mm in mm in kg lb in dB(A) cfm
UAN-611R-60C 6.5 - 12.0 4.3 - 8.6 620 383 15.1 47.0 1.9 14.0 0.6 1.6 3.5 3/8 80 21.1
UAN-611R-50C 8.5 - 15.0 5.7 - 10.8 470 373 14.7 47.0 1.9 14.0 0.6 1.6 3.5 3/8 80 21.1
UAN-611R-40C 10.0 - 18.0 7.2 - 12.9 400 373 14.7 47.0 1.9 14.0 0.6 1.6 3.5 3/8 80 21.1
UAN-611R-30C 13.0 - 25.0 9.3 - 18.0 270 373 14.7 47.0 1.9 14.0 0.6 1.6 3.5 3/8 80 21.1
UAN-701R-60C 20.0 - 31.0 14.8 - 22.8 600 445 17.5 47.0 1.9 14.0 0.6 2.4 5.3 3/8 85 31.6
UAN-701R-40C 28.0 - 45.0 20.7 - 33.2 400 455 17.9 51.0 2.0 18.0 0.7 2.4 5.3 3/8 85 31.6
UAN-701R-30C 37.0 - 60.0 27.3 - 44.2 300 455 17.9 60.5 2.4 18.0 0.7 2.4 5.3 1/2 85 31.6
Torque Control UAN Series
1 2 3 4
5 6 7 8
See also: AIR PREPARATION UNITS
on page 104
Right Angle Head
Torque Adjustment
Pneumatic Motor
Rear Exhaust
Grease Cock
1
2
3
4
5
Mechanical Clutch
Ergo-Touch Protector
Forward/Reverse Selector
Poka-Yoke (Option)
6
7
8
9
P
O
W
E
R

T
O
O
L
S
NUTRUNNERS: ANGLE
UAN-611R
AI MCO / 1 - 800- 852-1 368 39 AI MCO / 1 - 800- 852-1 368
MODEL MAX TORQUE / RANGE FREE SPEED OVERALL LENGTH WEIGHT MIN/MAX HEX SOCKET SIZE NOISE LEVEL AIR USAGE
Nm ft-lb rpm mm in lb kg mm in dB(A) cfm
STALL
UOW-11-10 12.7 9.4 400 295 11.7 3.1 1.4 7 - 12 1/4 - 7/16 75 12.5
UOW-11-14 15.7 11.6 260 311 12.2 4.0 1.8 10 - 17 3/8 - 5/8 75 12.5
UOW-11-22 23.5 17.4 180 326 12.8 4.0 1.8 13 - 24 1/2 - 7/8 75 12.5
UOW-11-30 31.4 23.1 135 347 13.6 5.5 2.5 17 - 32 5/8 - 1-3/16 75 12.5
SHUT-OFF CLUTCH
UOW-T60-10 3.9 - 12.7 2.9 - 9.4 300 370 14.6 4.0 1.8 7 - 12 1/4 - 7/16 75 18.0
UOW-T60-14 4.9 - 16.7 3.6 - 12.3 230 385 15.1 4.8 2.2 10 - 17 3/8 - 5/8 75 18.0
UOW-T60-22 6.9 - 23.5 5.1 - 17.4 170 400 15.7 4.8 2.2 13 - 24 1/2 - 7/8 75 18.0
UOW-T60-30 9.8 - 31.4 7.2 - 23.1 130 422 16.6 6.4 2.9 17 - 32 5/8 - 1-3/16 75 18.0
UOW/UOW-T Series
O W
C
H
CUSTOM
HEADS
AVAILABLE
For complete socket selection and custom sockets please contact AIMCO. Specify hex size of gear socket when ordering.
Air Hose Size: 3/8" I.D Air Inlet: N.P.T. 1/4"
MODEL HIGH SPEED/RECOMMENDED STANDARD SPEED/RECOMMENDED LOW SPEED/RECOMMENDED
MAX TORQUE MAX TORQUE MAX TORQUE
UOW-T60-10 520 rpm / 4.8 ft-lbs 300 rpm / 9.4 ft-lbs 170 rpm / 16.8 ft-lbs
Custom heads can be built for the following specifications:
MODEL H W O C
mm in mm in mm in mm in
UOW-11-10 UOW-T60-10 14 0.5 37 1.5 6 0.2 10 0.4
UOW-11-14 UOW-T60-14 14 0.5 40 1.6 8 0.3 13 0.4
UOW-11-22 UOW-T60-22 16 0.6 56 2.2 15 0.6 17 0.7
UOW-11-30 UOW-T60-30 16 0.6 68 2.7 23 0.9 21 0.8
Dimensions
P
O
W
E
R

T
O
O
L
S
NUTRUNNERS: OPEN- END TUBENUT WRENCHES
UOW-11-14
UOW-11-22
AI MCO / 1 - 800- 852-1 368 40 AI MCO / 1 - 800- 852-1 368
MODEL MAX TORQUE FREE SPEED OVERALL LENGTH WEIGHT MIN/MAX HEX SOCKET SIZE AIR USAGE
Nm ft-lb rpm mm in lb kg mm in cfm
STRAIGHT HEAD
URW-6 10.8 7.9 200 292 11.5 2.5 1.1 5.5 - 12 1/4 - 7/16 9.9
URW-8N 15.7 11.6 220 300 11.8 4.0 1.8 6 - 15 1/4 - 9/16 19.5
URW-8 13.7 10.1 240 360 14.2 4.0 1.8 6 - 15 1/4 - 9/16 19.5
URW-9N 31.4 23.1 200 380 15.0 5.0 2.3 6 - 15 1/4 - 9/16 23.7
URW-10N 56.8 41.9 150 394 15.5 5.8 2.6 10 - 19 3/8 - 3/4 25.0
URW-10N-1 56.8 42.0 150 417 16.4 5.7 2.5 10 - 15 3/8 - 9/16 29.0
URW-12N 58.8 43.4 150 397 15.6 5.9 2.7 12 - 22 5/16 - 7/8 25.0
URW-12NA 78.4 57.8 100 408 16.1 6.6 3.0 16 - 30 7/16 - 1 25.0
URW-12NB 93.1 68.7 85 416 16.3 7.0 3.2 14 - 33 1/2 - 1-15/16 25.0
BENT HEAD
URW-60R 10.8 7.9 200 288 11.3 2.5 1.1 5.5 - 12 1/4 - 7/16 9.9
URW-60 10.8 7.9 200 288 11.3 2.5 1.1 5.5 - 12 1/4 - 7/16 9.9
URW-80R 15.7 11.6 220 300 11.9 4.0 1.8 6 - 15 1/4 - 9/16 19.5
URW-80 15.7 11.6 220 300 11.9 4.0 1.8 6 - 15 1/4 - 9/16 19.5
URW-81R 15.7 11.6 220 300 11.9 4.0 1.8 6 - 15 1/4 - 9/16 19.5
URW Series
O W
W
C
L
C
H
H
Note: Optional Rubber Jacket Available (URW-843-1A) For complete socket selection and custom sockets contact AIMCO
Air Hose Size: 3/8" I.D. Air Inlet: N.P.T. 1/4" Specify hex size of gear socket when ordering.
O W
W
C
L
C
H
H
MODEL H L C W
mm mm mm mm
URW-6 13 88.0 10.0 20
URW-6 THIN (Thin type) 9 88.0 10.0 20
URW-6L (Extended type) 13 120.0 10.0 20
URW-8(8N)(9N) 18 102.5 12.5 25
URW-8(8N)(9N)THIN (Thin type) 10 102.5 12.5 25
URW-8(8N)(9N)L (Extended type) 18 168.5 12.5 25
URW-10N 18 106.5 16.5 33
URW-10N THIN (Thin type) 13 106.5 16.5 33
URW-10NL (Extended type) 18 114.0 16.5 33
MODEL H L C W
mm mm mm mm
URW-12N 18 109.5 18.0 36
URW-12N THIN (Thin type) 14 109.5 18.0 36
URW-12NA 18 120.5 23.0 46
URW-12NA THIN (Thin type) 14 120.5 23.0 46
URW-12NB 18 128.5 27.0 54
URW-60(R) 13 88.0 10.0 20
URW-60(R)THIN (Thin type) 9.5 88.0 10.0 20
URW-80(R)8(R) 13 102.5 12.5 25
URW-80(R)THIN (Thin type) 10 102.5 12.5 25
Dimensions
URW-60R URW-80R URW-81R
URW-60 URW-80
160 150 160
BENT HEAD TYPE
URW-8N
(with body jacket)
P
O
W
E
R

T
O
O
L
S
NUTRUNNERS: RATCHET WRENCHES
AI MCO / 1 - 800- 852-1 368 41 AI MCO / 1 - 800- 852-1 368
FACI LI TY AND BUDGETARY ADVANTAGES
When compressed air or electricity is unavailable or
impractical
Eliminate installation costs involved with air or electric
tools
Instantly transfer tools from location to location
APPLI CATI ON AND
PRODUCTI VI TY ADVANTAGES
Increase productivity in areas where corded electric or air
tools hinder efficiency
Gain access in tight spaces or inside applications
Eliminate dragging of tool cords or hoses
Easily walk around large products
QUALI TY ADVANTAGES
Abrasion-free tool housing and absence of hose avoids the
scratching of your product car hood, etc.
Tool will not operate if sufficient battery power is not
available
ERGONOMI C ADVANTAGES
Balanced weight due to optimal center of gravity
Maintains a consistent body temperature especially
compared to cold metal of air tools
Cleaner operating environment no oily air exhaust with
which to contend!
Why use cordless tools?
Which power source to choose?
Manufacturers have three basic power sources to choose from when selecting power tools.
Each offers distinct advantages in terms of cost, use and reliability.
P
O
W
E
R

S
O
U
R
C
E
A
D
V
A
N
T
A
G
E
S
High Power
Durability
High Duty Cycles
Clean
Low Toque Capabilities
Affordable Energy
Mobility
Accessibility
Easy Implementation
Pneumatic Electric Battery
AIMCO is the only company that can provide all three power sources in either pulse or continuous drive tools.
P
O
W
E
R

T
O
O
L
S
CORDLESS TOOLS: OVERVI EW
AI MCO / 1 - 800- 852-1 368 42 AI MCO / 1 - 800- 852-1 368
MODEL TYPE FREE SPEED TORQUE RANGE WEIGHT LENGTH DRIVE SOUND LEVEL VOLTAGE BATTERY CHARGER
(with battery)
rpm Nm ft-lb lb in in dB(A) V
UBP-T40 Shut-off 2200 6 - 12 4.4 - 8.8 2.6 8.3 1/4 hex 70 12.0 EY9200B EY0110B
UBP-65 Non shut-off 2200 15 - 30 11 - 22 2.7 7.5 1/4 hex 70 12.0 EY9200B EY0110B
Battery: EY9200B (sold separately) NOTE: Torque ranges reflect residual B joint torque values.
Charger: EY-0110B (sold separately) Charge Time: 45 min.
For use on bolts, please purchase a 3/8" square drive adaptor (A3S03A-2)
For Critical or Precise Control Applications
APPLI CATI ONS
For critical assembly of screws on
torque control applications from 3.6 to
25.0 ft-lbs (43 - 300 in-lbs)
Use where a pneumatic pulse tool or
angle nutrunner is inconvenient
Best when used on hard or medium
joints
PRODUCTI VI TY
Delivers high speed
ERGONOMI CS
Virtually eliminates torque reaction
felt by the operator with the pulse
mechanism
RELI ABI LI TY
Designed for industrial use, not a
box-store type tool
Few hard parts to replace or
maintain
QUALI TY
Provides precise torque
repeatability for critical joints
UBP-65
UBP-T40
UBP-T50
UBP-T60
P
O
W
E
R

T
O
O
L
S
UBP PULSE SERI ES CORDLESS TOOLS
AI MCO / 1 - 800- 852-1 368 43 AI MCO / 1 - 800- 852-1 368
SIGNATURE SERIES PISTOL GRIP TOOLS
Simple to use, yet sophisticated in performance, the AIMCO
Signature Series Pistol Tools give the operator the performance
needed to meet the demands of todays cordless applications.
The pistol grip tools feature an ergonomic handle providing the
operator with perfect balance as they use the tool. These tools
allow for fastening in tight locations at torques up to 9 ft-lbs (12
Nm). With a wide range of torque outputs and speeds, the
Signature Series Precision Cordless Tools provide the solution that
is right for your specic application.
SIGNATURE SERIES QUICK RELEASE CLUTCH
The Signature Series Tools feature a patented, quick releasing
clutch that delivers accuracy across multiple joint types. Each
clutch assembly is constructed of precisely machined parts to
insure not only accuracy, but durability over the lifespan of the
tool. In addition to tight tolerances, the driving anvil of each tool is
well supported to insure that torque is sensed by the clutch versus
side loads or run-out of the rotating components.
Whether your application is softer materials such as plastics and
gasket products or of a harder nature such as direct metal to
metal contact, the Signature Series Clutch will deliver the
accuracy you need.
Features that raise the
bar of expectations!
Typical Torque Graph of the
Signature Series Precision Cordless Tools
Extremely
Fast, Smooth
Clutch Mechanism
P
O
W
E
R

T
O
O
L
S
SI GNATURE SERI ES PI STOL GRI P TOOLS
AI MCO / 1 - 800- 852-1 368 44 AI MCO / 1 - 800- 852-1 368
SPC-P-2
SPC-P-4
SPC-P-6
SPC-P-9
SPC-P-9H
SPC-P-12
High Durability - No Maintenance Motors
Signature Series Tools utilize a state of the art, brushless, sealed motor
that requires no maintenance. In addition to a lifespan that easily
exceeds 1 million cycles, the efciency of the Signature Series Motor
means that batteries last longer.
Precision Clutch for Torque Accuracy
Meets ISO 5393 CMK>2.0 at +/- 10% tolerance. A wide variety of
torque ranges and speeds insures that the most accurate tool can be
applied to the job.
Low Battery Lock
Signature Series Tools feature a Low Battery Lock that disables the tool
when battery power is insufcient to provide the torque required by the
application.
Restart Lock
The tool features a Restart Lock which discourages double hits on a
recently completed joint. Once torque has been achieved, the trigger
function is locked out for a period of 0.8 seconds.
LED Lights
Signature Series Tools feature LED lights that provide simple process
information to the operator. Incomplete application of torque is
indicated by a RED LED light and an audible indicator. A GREEN LED
light lets the operator know that the precision clutch has shut the tool
off at the preset torque amount. Battery capacity is monitored by the
tool and a ashing RED LED light lets the operator know that the
battery needs to be recharged.
Application Illumination
Continuous illumination of the work area is provided by the Signature
Series Tool. This helps operators installing fasteners in poorly lit
environments.
One Touch Reverse
Signature Series Tools are designed to always be ready for fastening.
Should the operator need to reverse the rotation of the tool, a unique
one touch button system is on board. Buttons are strategically located
for both right and left handed operators. One touch of the button
places the tool into reverse rotation. After one cycle of reverse (or 10
seconds) the tool automatically changes back into its forward mode
ready for fastener installation.
Battery Life
A high efciency motor insures productivity between charges. Testing
has shown that the 9.6V, 1250 mAh, NiCd battery, fully charged is
capable of performing 3,000 run-downs before recharging is required.
Battery Interface
Signature Series Tools feature a precise, slide-lock interface between
tool and battery. This provides a secure connection that withstands the
rigors of an industrial environment.
*As tested on tools set to their mid-range, run on a UFT Joint
Simulator, set to a B joint of 140-180 degrees from snug and a
1-1.5 second free run prior to tightening.
1
2
3
6
7
8
9
4
5
4
8
9
6
3
7
1
2
5
MODEL TORQUE RANGE IDLE SPEED VOLTAGE WEIGHT (inc. battery) CHUCK BATTERY
ft lb Nm rpm lb kg in included
SPC-P-2 0.6 - 1.48 0.9 - 2.0 380 9.6V 2.8 1.3 1/4 hex SPC-96-NC
SPC-P-4 1.11 - 2.95 1.5 - 4.0 800 9.6V 2.8 1.3 1/4 hex SPC-96-NC
SPC-P-6 0.7 - 4.43 1.0 - 6.0 600 9.6V 2.8 1.3 1/4 hex SPC-96-NC
SPC-P-6SL 0.7 - 4.43 1.0 - 6.0 150 9.6V 2.8 1.3 1/4 hex SPC-96-NC
SPC-P-6-2ST* 0.7 - 4.4 1.0 - 6.0 600 9.6V 3.0 1.3 1/4 hex SPC-96-NC
SPC-P-9 1.48 - 6.64 2.0 - 9.0 380 9.6V 2.8 1.3 1/4 hex SPC-96-NC
SPC-P-9H 1.48 - 6.64 2.0 - 9.0 590 12V 3.3 1.5 1/4 hex SPC-12-NC
SPC-P-12 2.22 - 8.85 3.0 - 12.0 460 12V 3.3 1.5 1/4 hex SPC-12-NC
*Second Step Speed: 55-155 rpm
P
O
W
E
R

T
O
O
L
S
SI GNATURE SERI ES PI STOL GRI P TOOLS
AI MCO / 1 - 800- 852-1 368 45 AI MCO / 1 - 800- 852-1 368
SIGNATURE SERIES
RIGHT ANGLE NUTRUNNERS
Outstanding ergonomics, superior weight
distribution and long battery life are key
features of the AIMCO Signature Series Right
Angle Nutrunners.
These tools feature all the great benets of
the Signature Series Pistol Tools with the
ability to deliver torques from 4.4 to 11.8 ft-
lbs (6.0 Nm to 25 Nm). Torque reaction is
minimized by the precision clutch that shuts
off accurately and quickly.
MODEL TORQUE RANGE IDLE SPEED VOLTAGE WEIGHT (inc. battery) CHUCK BATTERY
ft lb Nm rpm lb kg in included
SPC-A-10 1.5 - 7.4 2 - 10.0 330 9.6V 3.1 1.4 3/8 sq. SPC-96-NC
SPC-A-10QC 1.5 - 7.4 2 - 10.0 330 9.6V 3.1 1.4 1/4 QC SPC-96-NC
SPC-A-16 4.4 - 11.8 6.0 - 16.0 300 12V 4.6 2.1 3/8 sq. SPC-12A-NC
SPC-A-25 7.34 - 18.43 10.0 - 25.0 240 12V 4.6 2.1 3/8 sq. SPC-12A-NC
SPC-A-16
SPC-A-25
2 4 1
3
6 7
5 9 8
*As tested on tools set to their mid-range, run on a UFT Joint
Simulator, set to a B joint of 140-180 degrees from snug and a
1-1.5 second free run prior to tightening.
High Durability-No Maintenance Motors
Signature Series Tools utilize a state of the art, brushless, sealed
motor that requires no maintenance. In addition to a lifespan that
easily exceeds 1 million cycles, the efciency of the Signature Series
Motor means that batteries last longer.
Precision Clutch for Torque Accuracy
Meets ISO 5393 CMK>2.0 at +/- 10% tolerance. A wide variety of
torque ranges and speeds insures that the most accurate tool can
be applied to the job.
Low Battery Lock
Signature Series Tools feature a Low Battery Lock that disables the
tool when battery power is insufcient to provide the torque required
by the application.
Restart Lock
The tool features a Restart Lock which discourages double hits on a
recently completed joint. Once torque has been achieved, the trigger
function is locked out for a period of 0.8 seconds.
LED Lights
Signature Series Tools feature LED lights that provide simple process
information to the operator. Incomplete application of torque is
indicated by a RED LED light and an audible indicator. A GREEN LED
light lets the operator know that the precision clutch has shut the
tool off at the preset torque amount. Battery capacity is monitored by
the tool and a ashing RED LED light lets the operator know that the
battery needs to be recharged.
Application Illumination
Continuous illumination of the work area is provided by the
Signature Series Tool. This helps operators installing fasteners in
poorly lit environments.
One Touch Reverse
Signature Series Tools are designed to always be ready for fastening.
Should the operator need to reverse the rotation of the tool, a unique
one touch button system is on board. Buttons are strategically
located for both right and left handed operators. One touch of the
button places the tool into reverse rotation. After one cycle of
reverse (or 10 seconds) the tool automatically changes back into its
forward mode ready for fastener installation.
Battery Life
A high efciency motor insures productivity between charges. Testing
has shown that the 9.6V, 1250 mAh, NiCd battery, fully charged is
capable of performing 2,000 run-downs before recharging is required.
Battery Interface
Signature Series Tools feature a precise, slide-lock interface between
tool and battery. This provides a secure connection that withstands
the rigors of an industrial environment.
1
2
3
6
7
8
9
4
5
P
O
W
E
R

T
O
O
L
S
SI GNATURE SERI ES RI GHT ANGLE TOOLS
AI MCO / 1 - 800- 852-1 368 46 AI MCO / 1 - 800- 852-1 368
MODEL VOLTAGE DIMENSIONS WEIGHT POWER
lb kg CONSUMPTION
SPC-C-110 110V 5 11/16" x 4 5/16" x 7 1/2" 2.2 1.0 110W
145mm x 110mm x 190mm
SPC-C-220 220V 5 11/16" x 4 5/16" x 7 1/2" 2.2 1.0 110W
230V 145mm x 110mm x 190mm
Charger Specifications
CHARGERS
The Signature Series Charger provides simple operational information to
the user with LED lights indicating operational and charge status of the
batteries. The latest charging systems also monitor charging temperatures
and use sensors to ensure the best charging conditions for optimal
battery maintenance.
One charger is all that is required for any
Signature Series Battery and recharge speeds
are quick. Conditioned batteries (those that
have been in use and through 3-5
charge/recharge cycles) charge back from low
in 15-30 minutes. New batteries charge
completely in 40-60 minutes (times will vary
depending on battery capacity).
BATTERIES
The AIMCO Signature Series charging and battery system
utilizes proven battery technologies and a common charging
station for simplicity and reliability.
AIMCO Signature Series Tools utilize a high efciency
EC brushless motor that minimizes power consumption
during operation. This means that AIMCO can draw on
proven, safe battery technologies and utilize the same
charging system across all Signature Series Batteries
without sacricing performance.
Nickel-Cadmium Battery (NiCd)
Nickel-Cadmium batteries (NiCd) are a proven, mature
industrial battery technology. The one weakness with a
NiCd battery can be what is called a memory effect.
This means that the battery can remember its usual
discharge point and begins to require a charge when it
reaches that point. Topping off of NiCd batteries will
cause this effect to develop. NiCd batteries do however,
have long life cycles and will last in excess of 1,000
discharge/recharge cycles when properly maintained.
Nickel-Metal Hydrade Battery (NiMh)
Nickel-Metal Hydrade (NiMh) batteries are also a
proven, mature industrial battery technology. These
batteries do not suffer the memory effect that NiCd
batteries do. NiMh batteries can and often do last
longer between charges than NiCd batteries. The trade
off with NiMh technology is that their lifecycle is
signicantly less than NiCd batteries. The average
lifespan of a NiMh battery is around 500
discharge/recharge cycles. One other item to consider
is that NiMh batteries will cease to function if
completely discharged. A small charge must be left in a
NiMh battery or it will refuse to accept a recharge.
MODEL VOLTAGE TYPE CAPACITY WEIGHT SUITABLE
lb gram TOOLS
SPC-96-NC 9.6V NiCd 1250 mAh .9 450 SPC-P-2
SPC-P-4
SPC-P-6
SPC-P-9
SPC-96-NM 9.6V NiMh 2000 mAh 1.0 460 SPC-P-2
SPC-P-4
SPC-P-6
SPC-P-9
SPC-12-NC 12V NiCd 1250 mAh 1.3 580 SPC-P-9H
SPC-P-12
SPC-12A-NC 12V NiCd 2000 mAh 1.6 730 SPC-A-16
SPC-A-25
SPC-12-NM 12V NiMh 2000 mAh 1.3 590 SPC-P-9H
SPC-P-12
SPC-A-16
SPC-A-25
Battery Specifications
P
O
W
E
R

T
O
O
L
S
SI GNATURE SERI ES BATTERI ES AND CHARGERS
AI MCO / 1 - 800- 852-1 368 47 AI MCO / 1 - 800- 852-1 368
HOLSTERS
AIMCO has several holster designs for carrying the
Signature Series Pistol and Right Angle Tools. The
holsters make it easy to carry the tool and keep it and
your applications protected.
SPC-P-HL SPC-A-HL
SPC-QC
SPC-CR
COLOR RINGS
Code your tools with Signature Series Color Rings.
AIMCO offers 7 different colors per pack which allows
you to visually identify your tools by line, torque setting
or by another characteristic that you determine.
QUICK CLIP
Carry your Signature Series Pistol Tool easily on any
work belt with the Quick Clip. The 2 piece Quick Clip
comes with a belt clip to slide onto the operators belt
and a stretch cord attachment for the tool. The
patented ball feature allows for quick and easy release
on the belt. The Quick Clip keeps the tool well
balanced and allows the operators hands to be free for
other tasks.
P
O
W
E
R

T
O
O
L
S
SI GNATURE SERI ES TOOL SUPPORT ACCESSORI ES
AI MCO / 1 - 800- 852-1 368 48 AI MCO / 1 - 800- 852-1 368
SPC-A-16-843-1A
Head Cover for 16 Nm Right Angle Tools
BODY JACKETS AND HEAD COVERS
Keep your tools protected and avoid accidental damage to
the application with AIMCOs Signature Series Body
Jackets and Head Covers.
SPC-P-843-1A
Body Jacket for Signature Series Pistol Tools
SPC-A-16TC-843-1A
Head Cover for 16 Nm Right Angle Tools
TOOL BASKETS
Tool Baskets are a great way to keep the Signature Series tool in place
when not being used. AIMCO tool baskets can be affixed to the bench
or rack and accept either the Pistol or Right Angle Tools.
21226
P
O
W
E
R

T
O
O
L
S
SI GNATURE SERI ES TOOL SUPPORT ACCESSORI ES
AI MCO / 1 - 800- 852-1 368 49 AI MCO / 1 - 800- 852-1 368
MODEL CAPACITY SPEED OVERALL LENGTH WEIGHT FROM CENTER SQ. DR. NOISE AVERAGE AIR
TO OUTSIDE OR HEX SIZE LEVEL CONSUMPTION
mm in rpm mm in kg lb mm in in dB(A) cfm
UW-6ASL(R)K 6 1/4 6500 260 10.2 1.1 2.5 31.0 1.2 3/8 92 10.5
UW-6CSK 6 1/4 7500 271 10.7 1.4 3.1 22.0 0.8 3/8 94 10.5
UW-6CSLRK 6 1/4 8000 238 8.3 1.2 2.6 14.0 0.6 3/8 93 10.5
UW-6SK 6 1/4 7500 160 6.3 1.2 2.7 22.0 0.8 3/8 93 10.5
UW-6SLK 6 1/4 8500 165 6.5 1.0 2.1 22.0 0.8 1/4 92 10.5
UW-6SSK 6 1/4 7500 194 7.6 1.0 2.2 22.0 0.8 1/4 91 10.5
UW-6SSLK 6 1/4 8500 202 7.9 0.9 2.0 22.0 0.8 1/4 91 10.5
UW-61E(R)K 8 5/16 7300 154 6.0 1.5 3.3 29.5 1.2 1/4 91 12.4
UW-61E(R)K 8 5/16 7300 154 6.0 1.5 3.3 29.5 1.2 3/8 91 12.4
UW-6CSH(R)K 8 5/16 7300 256 10.1 1.7 3.8 27.5 1.1 3/8 94 10.5
UW-6SSHK 8 5/16 7500 211 8.3 1.3 2.8 24.0 0.9 1/4 92 12.4
UW-8SH(R)K 8 5/16 7300 172 6.8 1.6 3.4 31.0 1.2 1/2 93 14.0
UW-ST6SHK 8 5/16 6500 170 6.7 1.7 3.7 24.0 1.0 3/8 92 14.0
UW-9CSK 10 3/8 7000 338 13.3 2.8 6.1 34.0 1.3 1/2 95 12.4
UW-9SRK 10 3/8 7000 173 6.8 1.8 3.9 27.5 1.1 1/2 93 16.0
UW-9SSK 10 3/8 7000 290 11.4 2.1 4.6 34.0 1.3 1/2 95 16.0
UW-10SHRK 12 1/2 6000 197 7.8 2.1 4.7 30.5 1.2 1/2 95 16.0
UW-13CSK 13 1/2 6500 375 14.8 5.2 11.4 39.0 1.5 1/2 97 26.5
UW-13S(R)K 13 1/2 6000 205 8.1 2.6 5.7 37.5 1.5 1/2 95 16.0
UW-13SSK 13 1/2 6300 303 11.9 3.2 7.0 34.0 1.3 1/2 97 19.4
UW-140P(R) 12 1/2 6500 190 7.5 2.7 5.9 30.0 1.2 1/2 93 25.0
UW-220P(L) 19 3/4 5500 225 8.9 4.4 9.6 42.0 1.7 3/4 95 25.0
UW-251P(L) 25 1 5500 275 10.8 8.0 17.6 51.5 2.0 1 95 28.0
UW-550 56 2-1/4 3500 525 20.7 36.0 79.2 78.0 3.1 1-1/2 112 79.0
UW-75S 76 3 1400 668 26.3 56.0 123.0 91.0 3.6 1-1/2 112 114.0
Air Hose Size: 3/8" I.D. (UW-6 - 140P) Air Inlet: N.P.T. 1/4" (UW-6 - 140P) NOTE: Additional models available. Please contact AIMCO.
1/2" I.D. (UW-220P(L)) N.P.T. 3/8" (UW-220P(L))
3/4" I.D. (UW-75S) N.P.T. 1" (UW-75S)
UW-6SSLK
UW-6SSK
UW-6SSHK
UW-13SSK
KEY
R: REAR AIR EXHAUST
C: ANGLE HEAD
SS: INLINE
ST: STUD BOLT
L: LONG ANVIL
P
O
W
E
R

T
O
O
L
S
I MPACT TOOLS
UW-140P(R)
UW-220P(L)
UW-6SK
UW-9SRK
UW-10SHRK
UW-13S(R)K
UW-6CSLRK
UW-6CSK
UW-550
AI MCO / 1 - 800- 852-1 368 50 AI MCO / 1 - 800- 852-1 368
MODEL CAPACITY SPEED OVERALL LENGTH WEIGHT FROM CENTER NOMINAL TYPE OF NOISE AVERAGE AIR
WITH CHUCK TO OUTSIDE CHUCK SIZE SPINDLE LEVEL CONSUMPTION
mm in rpm mm in kg lb mm in in in-thrd dB(A) cfm
UD-50-200 3 1/8 23000 135 5.3 0.7 1.5 21.0 0.8 5/16 3/8-24UNF 73 14
UD-50-45 6 1/4 5000 145 5.7 0.8 1.9 21.0 0.8 5/16 3/8-24UNF 72 14
UD-50-22 8 5/16 2200 140 5.5 0.9 2.0 21.0 0.8 5/16 3/8-24UNF 72 14
UD-50S-22 8 5/16 2200 205 8.1 0.8 1.8 21.0 0.8 5/16 3/8-24UNF 77 18
UD-60-29 8 5/16 2900 167 6.6 1.1 2.4 22.5 0.9 5/16 3/8-24UNF 77 18
UD-60S-29 8 5/16 2900 227 8.9 1.0 2.3 22.5 0.9 5/16 3/8-24UNF 77 18
UD-60-20 8 5/16 2000 180 7.1 1.2 2.6 22.5 0.9 5/16 3/8-24UNF 77 18
UD-60-15 8 5/16 1600 180 7.1 1.2 2.6 22.5 0.9 5/16 3/8-24UNF 76 18
UD-60-07 13 1/2 700 214 8.4 1.4 3.1 22.5 0.9 1/2 1/2-20UNF 75 18
UD-60-04 13 1/2 500 220 8.6 1.4 3.1 22.5 0.9 1/2 1/2-20UNF 75 18
UD-60S-29C 8 5/16 2900 276 10.9 1.5 3.3 22.5 0.9 5/16 3/8-24UNF 79 18
UD-80-07G 13 1/2 700 310 12.2 2.8 6.2 26.0 1.0 1/2 1/2-20UNF 79 23
UT-66B-07 8 5/16 800 196 7.7 1.4 3.1 25.0 1.0 85 14.4
Air Hose Size: 3/8" I.D. Air Inlet: N.P.T. 1/4" NOTE: Other models are available. Please contact AIMCO.
REPLACEMENT CHUCKS are available.
Contact your AIMCO sales representative for details.
P
O
W
E
R

T
O
O
L
S
DRI LLS
UT-66B-07
UD-60S-29C
UD-80-07G
UD-60-29
UD-60-20
UD-60-15
UD-60-07
UD-60-04
UD-50-200
UD-50-45
UD-50-22
UD-60S-29
AI MCO / 1 - 800- 852-1 368 51 AI MCO / 1 - 800- 852-1 368
MODEL CAPACITY BLOW OVERALL LENGTH WEIGHT PISTON PISTON NOISE AVERAGE AIR
DURALUMIN STEEL PER MIN. DIAMETER STROKE LEVEL CONSUMPTION
in in bpm mm in kg lb mm in mm in dB(A) cfm
SBH-0 3/32 6500 123 4.2 0.3 0.7 10.0 0.4 23 0.9 90 3.5
SBH-1A(R,H) 7/64 4000 209 8.2 0.9 1.9 11.1 0.4 56 2.2 92 5.0
BRH-1U(R,H) 1/8 3/32 2800 122 5.0 1.1 2.4 14.3 0.6 38 1.5 95 12.0
BRH-5U(R,H) 1/4 3/16 1800 190 7.5 1.4 3.1 12.7 0.5 100 3.9 95 13.0
BRH-1UV(R,H) 1/8 3/32 2800 162 6.4 1.4 3.0 14.3 0.6 38 1.5 91 12.0
BRH-5UV(R,H) 1/4 3/16 1800 227 9.0 1.7 3.7 12.7 0.5 100 3.9 91 13.0
Riveting Hammers
MODEL BLOW POWER ANVIL SHANK DIA. STROKE LENGTH WEIGHT
DIA. x LENGTH
lb in mm in mm in mm in lb kg
CB-13P 1.7 4.04 x 9.86 3.0 0.12 185 7.3 0.7 0.3
RH-20 20.4 10.2 0.401 29.8 1.2 213 8.4 2.0 0.9
RH-80 27.6 10.2 0.401 29.8 1.2 254 10.0 2.9 0.3
RH-100Z 78.1 10.2 0.401 29.8 1.2 328 12.9 3.9 1.8
Air Hose Size: 3/8" I.D. Air Inlet: N.P.T. 1/4" NOTE: Additional models available. Please contact AIMCO.
One Shot Hammers
P
O
W
E
R

T
O
O
L
S
PERCUSSI ON TOOLS
SBH-0
SBH-1A(R,H)
BRH-1U(R,H)
BRH-5U(R,H)
BRH-1UV(R,H)
BRH-5UV(R,H)
RH-20
RH-80
CB-13P
RH-100Z
AI MCO / 1 - 800- 852-1 368 52 AI MCO / 1 - 800- 852-1 368
MODEL CAPACITY SPEED RATED OVERALL LENGTH OVERALL HEIGHT WEIGHT NOISE AVERAGE AIR
(WHEEL SIZE) HORSEPOWER LEVEL CONSUMPTION
in rpm hp mm in mm in kg lb dB(A) cfm
UAG-40SB-136 4 13600 0.5 208 8.2 76 3.0 1.5 3.3 84 34.0
UAG-40SBL-136 4 13600 0.5 246 9.7 76 3.0 1.3 2.9 84 34.0
UAG-50SBL-120 5 12000 0.5 246 9.7 76 3.0 1.4 3.1 82 34.0
UAG-70SBL-76 7 7600 1.1 300 11.8 98 3.9 2.9 6.4 83 57.0
UAG-90SBL-59 9 5900 1.4 308 12.1 98 3.9 3.3 7.3 88 67.0
VG6-59 6 5900 3.0 196 7.7 4.6 10.1 89 77.7
VG7-76 7 7600 3.0 179 7.1 4.3 9.5 89 81.0
UP-25DB 5 9000 0.3 212 8.3 120 4.8 1.7 3.7 73 7.0
1/2" I.D. (UAG-90SBL-59) N.P.T. 3/8" (UAG-90SBL-59)
Grinders
MODEL CAPACITY COLLET SPEED RATED OVERALL LENGTH WEIGHT NOISE AVERAGE AIR
(WHEEL SIZE) CHUCK SIZE HORSEPOWER LEVEL CONSUMPTION
in in rpm hp mm in kg lb dB(A) cfm
UG-25NA 1/4 25000 .20 153 6.0 0.5 1.2 82 10.7
UG-38N 1/4 25000 .25 164 6.5 0.6 1.3 85 10.7
UG-38NA 1/4 20000 .25 165 6.5 0.7 1.4 75 14.0
UG-50S-200 1/4 20000 .20 198 7.8 0.6 1.3 73 14.0
UG-60S-29 1/4 25000 .50 227 8.9 1.1 2.3 77 18.0
UG-45H 1/4 18000 .30 196 7.4 0.8 1.8 76 22.0
UG-65EBL 2.5 14600 .30 272 10.7 1.4 3.1 95 22.0
UG-650EL 2.5 14600 .30 420 16.5 1.6 3.4 85 22.0
UG-1250L-72 5 7200 .55 436 17.2 2.8 6.2 88 32.7
1/2" I.D. (UG-1250L-72) N.P.T. 3/8" (UG-1250L-72)
Sanders
P
O
W
E
R

T
O
O
L
S
GRI NDERS AND SANDERS
UAG-40SB-136
UAG-40SBL-136
UAG-50SBL-120
VG6-59
UG-38N
UG-38NA
UG-25NA
UG-45H
UG-65EBL
UG-50S-200
UP-25DB
CONTROLLED TOOLS
Overview...................................................................................54-56
ACRADYNE
DC CONTI NUOUS DRI VE TOOLS

AcraDyne
iEC Controller...........................................................57-59
Toolware ........................................................................................60
AcraDyne
Angle Nutrunners ...........................................................61

AcraDyne
Inline Nutrunners ...........................................................62

AcraDyne
Pistol Nutrunners ...........................................................63

Acradyne
Tubenut Nutrunners .........................................................64

AcraDyne
Systems ........................................................................65
AcraDyne
Accessories ..............................................................66-67
Fixtured F-Series Nutrunners......................................................68-69
CONTROLLED PULSE TOOLS
Overview........................................................................................70
Omega UL-MC Series .....................................................................71
Omega UEP-MC Series ...................................................................72
AcraPulse
MC Series.....................................................................73
AcraPulse
EC Series......................................................................74
TRANSDUCERI ZED NUTRUNNERS .............................75
CONTROLLERS ...................................................................76-77
MONI TORS .................................................................................78
AI MCO / 1 - 800- 852-1 368 53 AI MCO / 1 - 800- 852-1 368
CONTROLLED FASTENI NG TOOLS
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 54 AI MCO / 1 - 800- 852-1 368
WHEN YOUR PROCESS REQUI RES:
TORQUE VERIFICATION
Digital display of torque value
Green light signals
DOCUMENTATION
Data collection
Networking
QUALITY & PRODUCTIVITY
Tight control
Multiple parameter sets
Detection of cross treading or stripped fasteners
Line control
CONTROLLED TOOLI NG
For many years, our clients have enjoyed the high
speed, light weight, and ergonomics of AIMCO pulse
tools. But when they need controlled tooling, many
users assume the only choice is DC electric nutrunners.
While we offer the complete line of AcraDyne
DC
electric nutrunners, you have more options at your
disposal. AIMCO offers the most complete line of
controlled tooling available today.
THE INDUSTRYS MOST COMPLETE LINE OF CONTROLLED TOOLING
0 50 100 500 1000 2000
AcraDyne
DC Electric
Controlled Pulse
Pneumatic Nutrunners
and Tubenut Wrenches
Torque Range (Nm)
48 MODELS
59 MODELS
15 MODELS
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
OVERVI EW
AI MCO / 1 - 800- 852-1 368 55 AI MCO / 1 - 800- 852-1 368
Electric and pneumatic pulse tools are classified as
discontinuous drive tools.
These tools utilize a hydraulic chamber to generate
torque in brief pulses under load.
Pulse tools are best suited to applications with little or
no prevailing torque and for hard to medium joints.
Pulse tools provide fast cycle times with no torque
reaction, even at higher torques.
Pneumatic angle nutrunners and DC electric tools are
classified as continuous drive tools.
These gear-driven tools continuously supply
power during the entire cycle.
While suitable for all joint rates, they are
especially suited for softer draw applications.
These tools will maintain their speed under load.
ANGLE VS PULSE COUNT
A common use of DC electric nutrunners is to utilize a "torque and
angle" strategy. Here, the tool runs down until the target torque is
reached and shuts off. During this rundown, the controller also
measures the angle of rotation from snug to finish. If this angle is
within a prescribed range, the cycle is considered good. If the
achieved angle is too small, the fastener may have cross threaded. If
the achieved angle is too high, the fastener may have stripped or
yielded. This provides an extra assurance that your process was
completed correctly.
With pulse tools, a torque and pulse count strategy can be
employed to gain similar results to a torque and angle strategy.
The number of pulses that occurs during rundown will be
proportional to the angle of rotation. If the number of pulses during
rundown is below the expected range, the fastener may have cross
threaded. A high number of pulses may mean a stripped fastener or
other error. All pulse tool controllers can utilize pulse count for error
protection.
ELECTRIC DRIVE
Air not convenient
or available
Quieter operation
Speed control
More efficient
PNEUMATIC DRIVE
Easy installation
Familiar maintenance
Lower initial investment
WHI CH I S RI GHT FOR ME?
3.1
.35
77
70
1.5
.52
ENERGY
Kwh
SOUND
dB( A)
VI BRATI ON
m/ s
2
UEP- 60 El ect r i c
ULT- 60 Ai r
CONTROLLED TOOLS: DC ELECTRIC VS. PULSE
FEATURE DC ELECTRIC CONTROLLED
NUTRUNNER PULSE TOOL
Critical torque control Yes Yes
Multiple parameters Yes Yes
Documentation and
data storage Yes Yes
Cross-threading and Yes, Yes, with
stripping detection with angle pulse count
Power sources Electric only Electric or
pneumatic
Multistep run-downs Available Available
A hard joint is an application that requires
30 or less of rotation from the snug point
to final torque.
A soft joint is an application that requires
720 or more of rotation from the snug point
to final torque.
REVI EW
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
OVERVI EW
AI MCO / 1 - 800- 852-1 368 56 AI MCO / 1 - 800- 852-1 368
ACRADYNE
DC ELECTRI C TOOLS
48 models from 4 - 450 Nm
125 - 2600 rpm
Good on all joint rates
Lightest, fastest DC electric tool available
OMEGA DC ELECTRI C PULSE TOOLS
2000 - 3000 rpm
Good on hard to medium joint rates
One hand operation with no torque reaction
ACRAPULSE
PNEUMATI C CONTROLLED PULSE TOOLS

1250 - 7000 rpm
Good on hard to medium joint rates
Familiar technology with no torque reaction
PNEUMATI C CONTROLLED NUTRUNNERS
AND TUBENUT WRENCHES
65 - 620 rpm
Good on all joint rates
Familiar technology and great for tight access areas
Controlled tools on an assembly line are often connected
through a hierarchy of control systems. At the top is
generally Human Machine Interface (HMI) which a human
operator uses to monitor and operate the system. The HMI is
often linked to a system of Programmable Line Controllers
(PLC) by a communication system which processes input
signals from several devices to control line operation. At the
bottom of the chain is the Fieldbus, which connects the
actual assembly devices to the PLC.
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
OVERVI EW
AI MCO / 1 - 800- 852-1 368 57 AI MCO / 1 - 800- 852-1 368
NETWORK CONNECTI VI TY
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE
I NTELLI GENT CONTROLLER

AI MCO / 1 - 800- 852-1 368 58 AI MCO / 1 - 800- 852-1 368
FEATURES AND BENEFI TS
Data Storage Standard units store 2,040
rundowns. 10,000,000 rundowns or more are
possible with advanced network capable units
ToolWare Custom-designed operating system
means no licensing fees
Backwards Compatible Works with any
AcraDyne
DC tool
Parameter Set Select and Indication Change
operations and clear indication of your current
operations with one button
External Port Software Updates Plug-in capability
for software updates
Tool Calibration Routines Stores the calibration
directly in the tools memory for easy plug and play
into any AcraDyne
controller
Rundown Storage Data stored for the last 2048
rundowns can be viewed as raw data or graphed with
statistical information. This data can also be saved in
.csv format and opened directly with MicroSoft
Excel or other programs.

Programmable Torque Filter Frequency Satisfies
customer specific filter requirements
Programmable Calibration and Service Interval
Alerts Configure alerts to indicate service or
calibration due for a tool based on number of cycles
or months since the last service or calibration
Real Time Clock For time and date stamping,
rundown information and other logged data
Bar Code Scanning
Network Capabilities Capable of interfacing with
plant controls
Graphing Capabilities To track and monitor
tightening strategies
Multiple Fastening Strategies Program up to eight
parameter sets to handle eight different torques and
types of joints
Connection Capabilities Connects with Parallel
(legacy), USB or Ethernet
ADVANCED COMMUNICATION FEATURES OF
THE iEC NETWORK CAPABLE CONTROLLER
Models iEC3, iEC3K, iEC4 and iEC4K
Advanced feature setup is done using a web interface
Store up to 10 million rundown cycles on 2 GB
internal memory block
Data can be retrieved using standard FTP methods
Allows ToolWare to connect through Ethernet and is
port selectable
Allows for use of bar code scanner to scan a bar code
and attach the data to each rundown
Transmits ASCII text string of rundown information
through Ethernet port when it is connected
Ethernet setup allows for both DHCP as well as
static IP addresses
Allows parameter set selection through serial port
Serial port can be used with other gateway devices
such as Devicenet
or Profibus
Enable/Disable tool through bar code

AcraDyne
was established in Portland, Oregon in the

early 1980s. Originally tasked with developing and
supporting automated assembly systems using AIMCO
tools, AcraDyne
has evolved into a leading manufacturer

of DC Electric Fastening Systems.
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE

AI MCO / 1 - 800- 852-1 368 59 AI MCO / 1 - 800- 852-1 368
ACCURATE
Controlled tightening improves quality
Process controls ensure no missed screws, stripped
threads, rehits or damaged threads
Reduces human error
Consistent torque control
Accurate tightening means better end-product quality
No premature shut-off
RELI ABLE
No guessing, just reliable and accurate assembly
Automatically set your torque and reduce
operator error
No counting required
Collect and analyze your production data
PRODUCTI VE
Increased productivity means increased profits
Replace up to eight conventional tools with one
controlled system
Quieter operation
No oil contamination from air tool exhaust
CONTROL STRATEGI ES (CW OR CCW)
Torque Control (TC) Provides target torque with
high and low limits with simple pass or fail criteria
for tightening threaded fasteners
Torque Control with Angle Monitoring (TC/AM)
For tightening threaded fasteners, allows you to
monitor angle and rotation to detect any changes in
the joint rate which would indicate process problems
Torque Monitoring with Angle Control (TM/AC)
For controlling the amount of fastener rotation
Torque Control and Angle Control (TC/AC)
Providing both torque and angle targets, and high and
low limits, further refining the pass or fail criteria for
critical applications
ADVANCED CONTROL FEATURES
Start Delay Allows the controller to ignore initial
torque reading for a period of time to aid in thread
cutting fasteners, prevailing load, and high inertial
load applications.
Rundown Backoff Rundown (RBR) Strategies
Used when joint conditioning is required.
The controller runs to an initial torque, reverses to a
pre-programmed angle, and then rundown to final
torque.
Rundown Backoff (RB) Strategies Allows the tool
to rundown to an initial torque, then reverse to a
pre-programmed angle.
Tubenut Control Runs a tubenut wrench to
torque, then returns to the home position when the
run command is removed. A patented safety
algorithm reduces the risk of pinch point injury.
iEC1 Controller with Torque / Angle Control
iEC1K Controller with Torque and Angle Control, integrated KDM
iEC2 Controller with Torque / Angle Control, I/O capability
iEC2K Controller with Torque and Angle Control, I/O capability, integrated KDM
iEC3 Controller with Torque / Angle Control, I/O capability, Ethernet connectivity
iEC3K Controller with Torque / Angle Control, I/O capability, Ethernet connectivity, integrated KDM
iEC4 Controller with Torque / Angle Control, I/O capability, advanced network capabilities including
Ethernet and fieldbus protocols
iEC4K Controller with Torque / Angle Control, I/O capability, advanced network capabilities including
Ethernet and fieldbus protocols, integrated KDM
MODEL DESCRIPTION
iEC Controllers
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE

AI MCO / 1 - 800- 852-1 368 60 AI MCO / 1 - 800- 852-1 368
Easy Parameter Set Set-Up
Adding and editing parameter sets is simple with ToolWare 2007s
Intuitive Parameter Set-up Function.
CurveWare
With CurveWare
TM
, fast access to torque and angle curves allows
the tool and controller to be programmed for optimal
performance on any application.
Statistics
Vital statistics and rundown plots can be quickly viewed to assure the
assembly process is being performed properly.
Batch Processing
Whether simple or complex, batch jobs can be quickly set up
using a variety of programming options.
I/O Monitor
For testing and visualization of processes, the I/O Monitor feature
allows fast and informative observation of the controllers Fixed Logic
I/O.
Calibration and Maintenance Scheduling
Programmable intervals and alerts provide immediate notice that
the tool and/or controller are in need of scheduled preventive
maintenance or calibration.
TOOLWARE
ToolWare is AcraDynes software package designed specifically for AcraDyne
tools and controllers. Provided at no

cost to all users, this comprehensive, user-friendly program allows programming, analysis and diagnostics via Ethernet,
USB or parallel connection to any Windows
computer workstation. The software automatically detects the controller

or can be used offline.
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
TOOLWARE
AI MCO / 1 - 800- 852-1 368 61 AI MCO / 1 - 800- 852-1 368
FEATURES
AcraDyne
angle nutrunners provide a solution to

space-limited fastening applications that are not
practical with inline or pistol model tools.
A compact, durable Titanium head houses a
precision right-angle gear set which fits into the
tightest of areas and delivers a highly accurate
fastening cycle. Lightweight materials and a
uniform body diameter provide a comfortable grip,
and an ergonomically-placed start lever allows for
simple control. AcraDyne
angle nutrunners offer

the perfect solution for any handheld, precision-
fastening application.
AEN12030
AEN12040
AEN13120
AEN13200*
AEN13300*
AEN13450*
*
NOT SHOWN
AEN12055
AEN13060
AEN13090
AEN12015
AEN12025
F
E
D
B
C
A
MODEL OVERALL CENTERLINE CENTERLINE HEAD CENTERLINE BODY
LENGTH (A) TO PIN (B) TO OUTPUT (C) DIAMETER (D) TO TOP (E) DIAMETER (F)
in mm in mm in mm in mm in mm in mm
2000 SERIES
AEN12015 14.8 376.7 1.2 29.2 0.8 20.8 1.0 26.2 0.5 12.7 1.5 38.1
AEN12025 14.8 376.7 1.2 29.2 0.8 20.8 1.0 26.2 0.5 12.7 1.5 38.1
AEN12030 14.6 371.9 1.4 34.8 1.0 26.2 1.4 35.6 0.5 13.5 1.5 38.1
AEN12040 14.6 371.9 1.4 34.8 1.0 26.2 1.4 35.6 0.5 13.5 1.5 38.1
AEN12055 17.9 454.4 1.4 34.8 1.0 26.2 1.4 35.6 0.5 13.5 1.5 38.1
3000 SERIES
AEN13060 19.1 485.7 1.7 42.7 1.2 31.2 1.7 41.9 0.6 15.8 1.9 47.0
AEN13090 19.1 485.7 1.7 42.7 1.2 31.2 1.7 41.9 0.6 15.8 1.9 47.0
AEN13120 21.2 539.0 2.4 60.5 1.6 39.6 2.1 53.3 0.8 19.1 1.9 47.0
AEN13200 23.4 594.4 2.3 57.4 1.6 39.6 2.1 53.3 0.8 19.1 1.9 47.0
AEN13300 23.8 603.8 2.3 59.4 1.7 41.9 2.5 63.5 0.9 23.6 1.9 47.0
AEN13450 23.8 603.8 2.3 59.4 1.7 41.9 2.5 63.5 0.9 23.6 1.9 47.0
MODEL FREE WEIGHT OUTPUT
MAX TORQUE TORQUE RANGE SPEED LESS SOCKET DRIVE
Nm ft-lb Nm ft-lb rpm lb kg in
2000 SERIES
AEN12015 15 11.0 3 - 12 2.2 - 8.9 1360 2.6 1.2 3/8 sq. dr.
AEN12025 25 18.0 5 - 20 3.7 - 14.8 780 2.6 1.2 3/8 sq. dr.
AEN12030 30 22.0 6 - 24 4.4 - 17.7 795 2.7 1.2 3/8 sq. dr.
AEN12040 40 29.5 8 - 32 5.9 - 23.6 540 2.7 1.2 3/8 sq. dr.
AEN12055 55 40.5 11 - 44 8.1 - 32.5 360 3.6 1.6 3/8 sq. dr.
3000 SERIES
AEN13060 60 44.0 12 - 48 8.9 - 35.4 840 5.5 2.5 1/2 sq. dr.
AEN13090 90 66.0 18 - 72 13.2 - 53.1 560 5.5 2.5 1/2 sq. dr.
AEN13120 120 88.5 24 - 96 17.7 - 70.8 400 9.0 4.1 1/2 sq. dr.
AEN13200 200 147.5 40 - 160 29.5 - 118 210 9.1 4.1 3/4 sq. dr.
AEN13300 300 221.0 60 - 240 44.2 - 177 140 9.7 4.4 3/4 sq. dr.
AEN13450 450 332.0 90 - 360 66.3 - 265.5 95 9.7 4.4 3/4 sq. dr.
Application Data
Dimensions
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE
ANGLE NUTRUNNERS
A
B
C
D
E
(Hex)
AES13400
AES13600
AI MCO / 1 - 800- 852-1 368 62 AI MCO / 1 - 800- 852-1 368
FEATURES
AcraDyne
inline nutrunners are the perfect

choice for fixtured fastening applications because
of their compact size and durability. A uniform
body diameter and a hex-shaped mounting point
allow for simple installation into fixture plates
simply machine a female hex into a steel plate,
insert the nutrunner, secure with the factory-
supplied nut and your fastening machine is
assembled. A reaction bar for use in handheld
applications is also included with all
AcraDyne
inline nutrunners.
AES12038
AES12068
AES12010
AES12020
AES12025
AES13040
AES13060
MODEL OVERALL MOUNTING BODY HEX HEX FLATS
LENGTH (A) HEIGHT (B) DIAMETER (C) THICKNESS (D) DIMENSION (E)
in mm in mm in mm in mm in mm
2000 SERIES
AES12010(Q) 14.3 363.7 12.8 325.6 1.5 38.1 0.4 9.1 1.0 25.4
AES12020(Q) 14.3 363.7 12.8 325.6 1.5 38.1 0.4 9.1 1.0 25.4
AES12025(Q) 14.3 363.7 12.8 325.6 1.5 38.1 0.4 9.1 1.0 25.4
AES12038 17.2 435.9 15.7 398.8 1.5 38.1 0.4 9.1 1.0 25.4
AES12068 17.2 435.9 15.7 398.8 1.5 38.1 0.4 9.1 1.0 25.4
3000 SERIES
AES13040 18.7 475.7 16.8 427.7 1.9 47.0 0.4 11.2 1.3 31.8
AES13060 18.7 475.7 16.8 427.7 1.9 47.0 0.4 11.2 1.3 31.8
AES13100 23.1 585.7 21.1 537.0 1.9 47.0 0.4 11.2 1.3 31.8
AES13150 23.1 585.7 21.1 537.0 1.9 47.0 0.4 11.2 1.3 31.8
AES13230 23.1 585.7 21.1 537.0 1.9 47.0 0.4 11.2 1.3 31.8
AES13400 25.5 647.7 23.2 589.3 1.9 47.0 0.6 15.2 2.0 50.8
AES13600 25.5 647.7 23.2 589.3 1.9 47.0 0.6 15.2 2.0 50.8
2000 SERIES
AES12010(Q)* 10 7.4 2 - 8 1.5 - 5.9 2080 2.3 1.0 3/8 sq. dr.
AES12020(Q)* 20 14.8 4 - 16 3.0 - 11.8 1200 2.3 1.0 3/8 sq. dr.
AES12025(Q)* 25 18.4 5 - 20 3.7 - 14.8 820 2.3 1.0 3/8 sq. dr.
AES12038 38 28.0 7.5 - 30 5.5 - 22.1 540 3.2 1.4 3/8 sq. dr.
AES12068 68 50.1 13.5 - 54 10.0 - 39.8 320 3.2 1.4 3/8 sq. dr.
3000 SERIES
AES13040 40 29.5 8 - 32 5.9 - 23.6 1240 4.8 2.2 1/2 sq. dr.
AES13060 60 44.0 12 - 48 8.9 - 35.4 840 4.8 2.2 1/2 sq. dr.
AES13100 100 73.8 20 - 80 14.75 - 59.0 465 7.8 3.5 1/2 sq. dr.
AES13150 150 110.6 30 - 120 22.1 - 88.5 310 7.8 3.5 1/2 sq. dr.
AES13230 230 169.6 46 - 184 33.9 - 135.7 210 7.8 3.5 1/2 sq. dr.
AES13400 400 295 80 - 320 59 - 236 116 14.7* 6.7** 3/4 sq. dr.
AES13600 600 440 120 - 480 89 - 354 78 14.7* 6.7** 3/4 sq. dr.
*Model numbers ending in Q come standard with 1/4" Hex quick-change chuck **Including reaction bar and fixture nut
Application Data
Dimensions
AES13100
AES13150
AES13230
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE
I NLI NE NUTRUNNERS
AI MCO / 1 - 800- 852-1 368 63 AI MCO / 1 - 800- 852-1 368
Built-in annunciator
Ultra-bright LED lights
AEP12010 10 7.4 2 - 8 1.5 - 5.9 2080 2.6 1.2 1/4 hex QC
AEP12020(Q)* 20 14.8 4 - 16 3.0 - 11.8 1200 2.6 1.2 3/8 sq. dr.*
AEP12025(Q)* 25 18.4 5 - 20 3.7 - 14.8 820 2.6 1.2 3/8 sq. dr.*
AEP12038 38 28.0 7.5 - 30 5.5 - 22.1 540 3.6 1.6 3/8 sq. dr.
AEP12068 68 50.1 13.5 - 54 10.0 - 39.8 320 3.6 1.6 3/8 sq. dr.
*Model numbers ending in Q come standard with 1/4" Hex quick-change chuck
Application Data
Top cable configuration
See also: TOOL BASKET
on page 66
FEATURES
Cable available in top or bottom configuration
For models with top cable inlet please add T to model number
(for example, AEP12010T)
Headlights First industry controlled tool with ultra-bright
LEDs for illumination of your application
ACRADYNE
PI STOL GRI P NUTRUNNERS

AEP12010
AEP12020
AEP12025
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 64 AI MCO / 1 - 800- 852-1 368
Safety First!
Application Data
Nm ft-lb Nm ft-lb rpm lb kg in mm
AET12020 20 14.8 4 - 16 3.0 - 11.8 580 2.9 1.3 1/4 - 7/16 7 - 12
AET12025 25 18.4 5 - 20 3.7 - 14.8 440 3.8 1.7 3/8 - 5/8 10 - 17
AET12035 35 25.8 7 - 28 5.2 - 20.7 320 4.3 2.0 1/2 - 7/8 13 - 24
AET12050 50 36.9 10 - 40 7.4 - 29.5 240 5.4 2.5 5/8 -1-3/16 17 - 32
Request specific socket size when placing your order. AIMCO offers a wide variety of socket sizes to fit your needs.
SPECI ALI ZED HEADS
AIMCO is able to provide specialized heads
for almost any application. Tubenut, Hold
and Drive, Crow Foot, Offsets and Sliding
Spindles are just a few of the head styles
available. Let us know your requirements
and we will help select the head
conguration to get the job done.
FEATURES
Provides a safe and ergonomic solution to the serious operator
safety concerns involved with tubenut wrenches
Transducer senses resistance while socket is open to help
prevent damage or injury
Patented Safety Algorithm
No double hit or twin lever needed
With Innovative Safety Sensor Technology!
ACRADYNE
TUBENUT RUNNERS
AET12020
AET12025
AET12035
AET12050
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 65 AI MCO / 1 - 800- 852-1 368
ENGI NE MANUFACTURER
Gasoline generator assembly
Six spindle 30 Nm
Replaced hand assembly with
rotation pattern to simultaneous
rundown
Custom display panel showing
application
Cpk range of 3.26.9 far
exceeded quality requirements
FEATURES
Nutrunner sequencing This allows nutrunners to be sequenced at
each phase of the tightening process allowing even distribution of
torque and load to each fastener.
Even torque distribution Where there is uneven torque distribution,
part damage or distortion could occur with possible fastener failure or
loss of residual clamp load.
Snug, threshold, final torque in one pass No need for multiple
torque stage sequencing as with a single nutrunner tool. Fixtured
nutrunners save time and effort from start to finish.
No missed fasteners With multiple nutrunners there is a spindle
dedicated to each location, ensuring quality on every rundown on
every bolt.
Better residual torques Synchronized controlled fastening allows
residual torque levels to be more consistent with the dynamic torque
specification.
Saving in cycle time Compared with using a single nutrunner tool
with many rundowns, running all fasteners simultaneously reduces in-
station cycle time.
Cost saving benefits Saving installation cycle time frees up operators
to handle additional tasks and potentially reduce labor requirements, at
the same time eliminating bottle necks.
Collect data Most common methods of collecting data for quality
control and statistical analysis can be implemented from serial data
string using RS232 to formatted data from a network database.
MULTI PLE
NUTRUNNI NG SYSTEMS
AIMCO is able to integrate the
AcraDyne
tool spindle into a

customized Multiple Nutrunning
System that will address your needs.
From simple systems vertically
suspended above the part to assembly
stations that integrate with your line,
AIMCO can handle your project.
Let us know your requirements and
we will propose a solution tailored to
your needs.
AUTOMOTI VE
MANUFACTURER
Wheel lug nut assembly
Four spindle 105 Nm
Rotating spindle trunnion
Replaced competitive system
Built-in PC for data storage
SMALL ENGI NE
MANUFACTURER
Air cooled small vehicle engine
assembly
Ten spindle 2.42.8 kgf-m
Integrated PLC control of system
functions
Supplied overhead rail follows line
and returns powerhead to home
position
Powerhead features single lever
control and visual conrmation of
accepted torque
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE
SYSTEMS
AI MCO / 1 - 800- 852-1 368 66 AI MCO / 1 - 800- 852-1 368
SOCKET TRAY
Simply remove the assigned socket
to select the application to be run.
Fast set up. Parameters assigned to
socket position automatically.
Optional self-illuminating socket
receptacles.
Delrin
blanks may be easily

machined by the customer to
accommodate custom socket
profiling.
Nothing to break, wear out or
maintain. Proximity sensors detect
presence of socket.
MODEL DESCRIPTION
013-13-2 2 Position Socket Tray
KEYPAD DISPLAY MODULE (KDM)
For tool setup, statistical display, and
basic diagnostics. It can be built-in,
hand-held, or remotely mounted.
For remote mounting. Connects to
AcraDyne
controllers via 20403

data cable (Can only be used by
connection to a controller).
CABLE ASSEMBLIES
The AcraDyne
DC electric
nutrunner tool system uses a
single cable to carry all necessary
conductors for superior
ergonomics and durability.
Flexible polyurethane cover
for maximum durability,
abrasion and is transmission
fluid resistant. Provides a soft,
non-marring material to
protect sensitive surfaces.
Quick disconnects at both
ends facilitate tool changeover
and trouble-shooting.
The CAN data/signal is via
RJ45 for products such as the
KDM, socket tray or computer.
UNIVERSAL TOOL BASKET
TOOL BAILS
AcraDynes spring bails are
designed for use with any of the
AcraDyne
2000 or 3000 series

tools.
The spring bails snap on quickly
and firmly at any place on the tool
body for perfect balance and secure
suspension.
LENGTH
MODEL DESCRIPTION m ft
TOOL CABLES
20290 Standard tool cable - 8' length 2.5 8
20006 Standard tool cable - 25' length 7.6 25
23947 Premium tool cable - 3m length 3 9.8
23948 Premium tool cable - 5m length 5 16.4
24080 Premium tool cable - angle, 5m 5 16.4
24079 Premium tool cable - angle, 10m 10 32.8
PISTOL
20292 8' captive cable 2.5 8
EXTENSION
20291 25' extension cable 7.6 25
20722 50' extension cable 15.0 50
DATA
20403 Data/signal connection cable 2.0 6
Accessories to controller
AEC-CIM Interface module which allows communication
between a computer and an AcraDyne
controller
through USB or CAN connections.
All necessary cables included.
MODEL DESCRIPTION
21159 2000/3000 Series Vertical Tool Bail
2000 Series Nutrunners
21208 Spring Bail Assembly
20601 Fixed Titanium Bail Assembly
20602 Rotating Titanium Bail
3000 Series Nutrunners
21209 Spring Bail Assembly
20559 Fixed Titanium Bail Assembly
20556 Rotating Titanium Bail
Keypad Display Module
20752
Socket Tray
013-13-2
Tool Bails
Universal Tool Basket
21226
Premium Tool Cable
23947
Tool Cable
20290
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRADYNE
ACCESSORI ES
AI MCO / 1 - 800- 852-1 368 67 AI MCO / 1 - 800- 852-1 368
TORQUE, Nm
5 10 15 20 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450
Torque Range Max Torque
MODEL RPM LENGTH WEIGHT
in mm lb kg
ANGLE
AEN12015 1360 14.8 376.7 2.6 1.2
AEN12025 780 14.8 376.7 2.6 1.2
AEN12030 795 14.6 371.9 2.7 1.2
AEN12040 540 14.6 371.9 2.7 1.2
AEN12055 360 17.9 454.4 3.6 1.6
AEN13060 840 19.1 485.7 5.5 2.5
AEN13090 560 19.1 485.7 5.5 2.5
AEN13120 400 21.2 539.0 9.0 4.1
AEN13200 210 23.4 594.4 9.1 4.1
AEN13300 140 23.8 603.8 9.7 4.4
AEN13450 95 23.8 603.8 9.7 4.4
INLINE
AES12010 2080 14.3 363.7 2.3 1.0
AES12020 1200 14.3 363.7 2.3 1.0
AES12025 820 14.3 363.7 2.3 1.0
AES12038 540 17.2 435.9 3.2 1.4
AES12068 320 17.2 435.9 3.2 1.4
AES13040 1240 18.7 475.7 4.8 2.2
AES13060 840 18.7 475.7 4.8 2.2
AES13100 465 23.1 585.7 7.8 3.5
AES13150 310 23.1 585.7 7.8 3.5
AES13230 210 23.1 585.7 7.8 3.5
AES13400 116 25.5 647.7 14.7* 6.7*
AES13600** 78 25.5 647.7 14.7* 6.7*
PISTOL
AEP12010 2080 14.3 363.7 2.6 1.2
AEP12020 1200 14.3 363.7 2.6 1.2
AEP12025 820 14.3 363.7 2.6 1.2
AEP12038 540 17.2 435.9 3.6 1.6
AEP12068 320 17.2 435.9 3.6 1.6
TUBENUT
AET12020 580 14.8 375.9 2.9 1.3
AET12025 440 15.5 393.7 3.8 1.7
AET12035 320 16.0 406.4 4.3 2.0
AET12050 240 16.4 416.6 5.4 2.5
*Including reaction bar and fixture nut.
**Torque Range: 120-480Nm Max Torque: 600Nm
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
DC TOOLS: TOOL/SPI NDLE SELECTI ON GUI DE
AI MCO / 1 - 800- 852-1 368 68 AI MCO / 1 - 800- 852-1 368
FEATURES
Reduced Cable Numbers Integral type tube containing torque sensor cable and
resolver cable.
Enhanced Memory Capacity We have increased memory capacity to get better
efficiency of assembly line and tightening data control.
Open Network Communication We have prepared all types of communication
boards for your various specifications (M-NET, Device net, Inter-bas, CC-link).
Automatic Setting (Automatic recommended value input) Advance value
preparation per application will help you simplify your parameter setting.
Space Saving One piece structure contained spindle controller and driver unit
has reduced volume space occupancy by 40% to 60% of ordinary elements.
NO. OF SPINDLES VOLUME & WIDTH VOLUME & WIDTH WITH F-SERIES
BEFORE UEC-F024 UEC-F120
cm mm cm mm cm mm
1-Spindle 16,800 200 6,360 150 8,268 195
2-Spindle 24,360 290 8,904 210 12,084 285
5-Spindle 47,040 560 16,536 390 24,804 585
10-Spindle 84,840 1,010 29,256 690 48,336 1,140
F-SERIES NETWORK
CONNECTIVITY
The F Series Nutrunner
System will satisfy multiple
tightening patterns.
Torque Tightening
Spline Press Ft Tightening
Torque
Pin Hole Alignment Tightening
Angle Tightening
Pre-Load Detection
Angle
Idle Operation Check
Plastic Range Monitor
FIXTURED F-SERI ES NUTRUNNERS
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
AI MCO / 1 - 800- 852-1 368 69 AI MCO / 1 - 800- 852-1 368
EXTERNAL DIMENSIONS (mm) TORQUE MOTOR FLANGE
TYPE L1 L2 L3 D1 D2 P A B SENSOR TYPE DESIGN
UNR-F015-45NT 371 41 12 40.5 38 51 M6 9.5 TM-035 F015 (a)
UNR-F015-65NT 371 41 12 40.5 38 51 M6 9.5 TM-035 F015 (a)
UNR-F015-200NT 400 41 12 40.5 38 51 M6 9.5 TM-035 F015 (a)
UNR-F015-280NT 400 41 12 40.5 38 51 M6 9.5 TM-035 F015 (a)
UNR-F015-350NT 400 41 12 40.5 38 51 M6 9.5 TM-035 F015 (a)
UNR-F050-270NT 453.5 41 12 50 38 51 M6 9.5 TM-035 F050 (a)
UNR-F050-630NT 500.5 41 16.5 50 38 62 M8 12.7 TM-085 F050 (a)
UNR-F050-730NT 500.5 41 16.5 50 38 62 M8 12.7 TM-085 F050 (a)
UNR-F050-880NT 512.5 45 20 50 48 62 M8 15.88 TM-150 F050 (a)
UNR-F050-1400NT 512.5 45 20 50 48 62 M8 15.88 TM-150 F050 (a)
UNR-F100-1300NT 519.5 45 20 62 48 62 M8 15.88 TM-150 F100 (a)
UNR-F100-1900NT 515.5 45 20 62 48 76 M8 15.88 TM-250 F100 (b)
UNR-F100-2500NT 515.5 45 20 62 48 76 M8 15.88 TM-250 F100 (b)
UNR-F100-3700NT 589 57 30 62 58 76 M10 19 TM-400 F100 (b)
UNR-F100-5400NT 704.5 80 40 62 70 90 M10 25.4 TM-700 F100 (b)
TYPE CAPACITY (Nm)
TM-035 34.3
TM-085 83.3
TM-150 147
TM-250 245
TM-400 392
TM-700 686
TM-1000 980
Torque Sensor Specifications
Rated Strain 2000X106
Output Voltage 1.0mV/V
Non-Lineality 0.5% R.O.
Influence on Zero Point
Due to Temperature
0.1% R.O./C
Temperature Rating 10~+65C
Input Output Resistance 480
Maximum Input Voltage 16V
Insulation Resistance Greater than 300
Overload Capacity 150%
Inline Motor Specifications
TIGHTENING FREE SPEED WEIGHT SPINDLE
TYPE TORQUE (Nm) (rpm) (kg) UNIT
UNR-F015-45NT 4.5 3,200 2.48 UEC-F024
UNR-F015-65NT 6.5 2,200 2.48 UEC-F024
UNR-F015-200NT 20 730 2.73 UEC-F024
UNR-F015-280NT 28 500 2.73 UEC-F024
UNR-F015-350NT 35 410 2.73 UEC-F024
UNR-F050-270NT 27 1,750 4.86 UEC-F060
UNR-F050-630NT 63 750 5.08 UEC-F060
UNR-F050-730NT 73 650 5.08 UEC-F060
TIGHTENING FREE SPEED WEIGHT SPINDLE
TYPE TORQUE (Nm) (rpm) (kg) UNIT
UNR-F050-880NT 88 540 5.47 UEC-F060
UNR-F050-1400NT 140 340 5.47 UEC-F060
UNR-F100-1300NT 130 730 7.42 UEC-F120
UNR-F100-1900NT 190 500 7.94 UEC-F120
UNR-F100-2500NT 250 370 7.94 UEC-F120
UNR-F100-3700NT 370 260 9.55 UEC-F120
UNR-F100-5400NT 540 175 17.0 UEC-F120
INLINE NUTRUNNERS
Fixtured F-Series right angle nutrunners also available. Please contact AIMCO for details.
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
FIXTURED F-SERI ES NUTRUNNERS
AI MCO / 1 - 800- 852-1 368 70 AI MCO / 1 - 800- 852-1 368
ACRAPULSE
MC
Electronic control with pneumatic power
Magneto-restrictive non-contacting
transducer
Internal solenoid valve included on most
models
LED on tool for verification
Dual chamber, 9-blade motor for more
power under load
Muffled rear exhaust
Use with either controller:
UEC-4800 (p.76)
UEC-4500 (p.77)
See page 73
OMEGA UEP SERI ES
DC Brushless electric motor
Magneto-restrictive non-contacting
transducer
Omega series pulse unit (see p.11)
Aluminum housing for light weight
Single cable connection
70 dB(A) sound level
UEC-4800 (p.76)
UEC-4500 (p.77)
See page 72
ACRAPULSE
EC
Electronic control with pneumatic power
Strain gage transducer
Integral gear package
Internal solenoid valve included on most
models
LED on tool for verification
Muffled rear exhaust
UEC-4800 (p.76)
UEC-4500 (p.77)
See page 74
3.1
.35
77
70
1.5
.52
ENERGY
Kwh
SOUND
dB( A)
VI BRATI ON
m/ s
2
UEP- 60 El ect r i c
ULT- 60 Ai r
Which is right for me?
UEC-4800 UEC-4500
The pulse unit of a transducerized pulse tool is typically
set at its highest torque output. This allows the tool to
reach maximum torque, if required, and allows the tool
controller to shut the tool off properly. For hard joints or
applications where the tool is oversized, the pulse unit
may be adjusted downwards to provide more repeatable
and acceptable torque values.
ELECTRI C DRI VE
Air not convenient or available
Quieter and cleaner operation
Speed control
PNEUMATI C DRI VE
Easy installation
Lower initial investment
Longer life
Better power-to-weight
ratio
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
CONTROLLED PULSE TOOLS: OVERVI EW
AI MCO / 1 - 800- 852-1 368 71 AI MCO / 1 - 800- 852-1 368
UEC-4800TP CONTROLLER
MODEL TORQUE RANGE FREE SPEED LENGTH WEIGHT CENTER TO OUTSIDE DRIVE SIZE AIR USAGE
Nm ft-lb rpm in cm lb kg in mm in cfm
UL-40MC 7.5 - 15 5.6 - 11.1 5,450 6.7 17.0 2.4 1.1 1.0 26 3/8 7.0
UL-40DMC 7.5 - 15 5.6 - 11.1 5,450 6.7 17.0 2.4 1.1 1.0 26 1/4 7.0
UL-50MC 20 - 35 14.8 - 25.9 6,700 6.9 17.5 2.4 1.1 1.0 26 3/8 8.8
UL-60MC 30 - 50 22.2- 37.0 6,600 6.9 17.5 2.5 1.1 1.0 26 3/8 14.0
UL-70MC 36 - 65 26.6 - 48.1 5,700 7.4 18.7 2.7 1.2 1.0 26 3/8 15.8
UL-90MC 55 - 100 40.7 - 74.0 5,500 7.9 20.3 3.7 1.7 1.2 28 1/2 20.3
UL-100MC 85 - 130 62.9 - 96.2 5,200 8.5 21.5 4.5 2.0 2.0 30 1/2 19.3
Fast, Accurate Pneumatic Assembly with Superior Ergonomics
FEATURES
Pulse tool ergonomics with controlled tool
advantages
20% increase in power-to-weight ratios due
to external solenoid valve
Magnetostrictive transducer provides high
durability with low size and weight
All models work with any UEC Series
controller
Virtually no torque reaction offers one-
handed operation, leading to significant
productivity advantages
With Touch-screen option.
UEC-4500 CONTROLLER UEC-4800 CONTROLLER
See also: ERGO-DRIVE
SOCKETS
on page 108
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
OMEGA UL- MC SERI ES
AI MCO / 1 - 800- 852-1 368 72 AI MCO / 1 - 800- 852-1 368
MODEL TYPE TORQUE RANGE FREE SPEED WEIGHT LENGTH DRIVE SOUND LEVEL REQUIRED
Nm ft-lb rpm lb in in dB(A) DRIVER BOX
UEP-50MC(-STDA)* Transducerized 5 - 10 4 - 7 2000 4.0 7.9 3/8 sq. dr. 70 UEPD-51A-UL
UEP-50DMC(-STDA)* Transducerized 5 - 10 4 - 7 2000 4.0 7.9 1/4 hex 70 UEPD-51A-UL
UEP-60DMC(-STDA)* Transducerized 10 - 25 8 - 18 2000 4.7 8.7 1/4 hex 70 UEPD-61A-UL
* -STDA option includes:
UEP-MC tool
Driver Box
Driver Cable
(Components can be sold individually)
Also requires either controller to operate:
UEC-4800 UEC-4500
FEATURES
Operates on standard 110V or
220V power
Extremely durable, brushless motor
Programmable tool RPM for
increased accuracy and adjustability
to joint conditions
Two-stage trigger for separate,
slower RPM for soft-start
applications
Quiet operation
I/O capability for programmable
line control
Pulse tool advantages on
applications that require controlled
electric tools
MODEL LENGTH
910-543-0 3 Meters
910-544-0 5 Meters
910-545-0 10 Meters
UEP-MC Series Driver Cables
UEP-MC-STDA Kit
See also: UEC CONTROLLERS
on page 76-77
UEP-60MC
UEP-50MC
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
OMEGA UEP- MC SERI ES
AI MCO / 1 - 800- 852-1 368 73 AI MCO / 1 - 800- 852-1 368
ALPHA-80MC
ALPHA-90MC
ALPHA-101MC
UXR-1820MC
UXR-2000MC
ALPHA-DMC, 1/4" QUICK CHANGE
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRA- PULSE
MC SERI ES
MODEL TORQUE RANGE FREE OVERALL WEIGHT DRIVE NOISE AIR
SPEED LENGTH LEVEL USAGE
Nm ft-lb rpm mm in lb kg in dB(A) cfm
ALPHA-50DMC* 6 - 15 4.5 - 11 5,700 193 7.6 2.9 1.3 1/4 hex 82 7.1
ALPHA-50MC* 6 - 15 4.5 - 11 5,700 193 7.6 2.9 1.3 3/8 82 7.1
ALPHA-60DMC 9 - 20 7 - 14 7,000 205 8.1 3.1 1.4 1/4 hex 82 8.8
ALPHA-60MC 9 - 20 7 - 14 7,000 205 8.1 3.1 1.4 3/8 82 8.8
ALPHA-60SDMC 10 - 17 7 - 12 5,500 280 11.0 2.8 1.2 1/4 hex 82 8.8
ALPHA-60SMC* 10 - 17 7 - 12 5,500 280 11.0 2.8 1.2 3/8 82 8.8
ALPHA-70MC 12.5 - 30 9 - 22 7,000 205 8.1 3.1 1.4 3/8 82 12.3
ALPHA-80MC 16 - 40 12 - 29 7,000 221 8.7 3.3 1.5 3/8 82 15.8
ALPHA-90MC 20 - 47 14 - 34 6,500 221 8.7 3.3 1.5 3/8 82 15.8
ALPHA-101MC 34 - 70 25 - 51 6,200 233 9.2 4.6 2.1 1/2 82 17.6
ALPHA-110MC 45 - 100 33 - 72 5,000 249 9.8 5.5 2.5 1/2 82 22.9
ALPHA-130MC 80 - 150 59 - 110 3,400 266 10.5 7.7 3.5 1/2 82 22.9
ALPHA-140MC 140 - 220 103 - 162 3,500 295 11.6 10.2 4.6 3/4 82 28.3
UXR-1820MC 140 - 250 103 - 184 4,600 322 12.3 12.3 5.5 3/4 84 24.7
UXR-2000MC 200 - 400 148 - 295 4,800 355 14.0 17.6 8.0 3/4 84 33.6
UXR-2400SMC 300 - 600 221 - 443 3,300 416 16.4 27.6 12.5 1 85 35.3
1/2" I.D. FOR UXR-1820MC/2000MC/2400SMC N.P.T. 3/8" FOR UXR-1820MC; N.P.T. 1/2" FOR UXR-2400SMC
* External Solenoid Valve (909-749-0) Required
AI MCO / 1 - 800- 852-1 368 74 AI MCO / 1 - 800- 852-1 368
MODEL FREE OVERALL WEIGHT FROM CENTER DRIVE NOISE AIR
TORQUE RANGE SPEED LENGTH TO OUTSIDE LEVEL USAGE
Nm ft-lb rpm mm in lb kg mm in in dB(A) cfm
U-50EC 4 - 10 3 - 7 2,100 195 7.7 3.3 1.5 21 0.8 3/8 78 10.2
U-50DEC 4 - 10 3 - 7 2,100 201 7.9 3.3 1.5 21 0.8 1/4 Hex 78 10.2
U-50SDEC* 4 - 10 3 - 7 2,100 280 11.5 3.4 1.6 21 0.8 1/4 Hex 72 7.7
U-50SEC* 4 - 10 3 - 7 2,100 280 11.2 3.4 1.6 21 0.8 3/8 72 7.7
U-60EC 15 - 30 11 - 22 1,900 193 7.6 3.5 1.6 27 1.1 3/8 78 14.1
U-60DEC 15 - 30 11 - 22 1,900 305 12.0 4.4 2.0 27 1.1 1/4 Hex 75 12.3
U-60SEC* 15 - 25 11 - 18 1,900 305 12.0 4.4 2.0 27 1.1 3/8 82 14.1
UX-80EC 25 - 45 18 - 33 1,900 197 7.8 4.0 1.8 30 1.2 3/8 80 17.7
U-100EC 50 - 80 36 - 59 1,700 233 8.2 6.2 2.8 33 1.3 1/2 80 24.7
UX-120EC** 65 - 120 47 - 88 900 253 10.0 8.6 3.9 36 1.4 1/2 77 28.2
UX-130EC 90 - 170 65 - 123 1,250 273 10.8 10.4 4.7 40 0.6 1/2 79 35.0
** Recommended air pressure for UX-120EC: 50 - 57 psi
** External Solenoid Valve (909-749-0) required
D Style
1/4" Hex QuickChange
See also: UEC CONTROLLERS
on page 76-77
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
ACRA- PULSE
EC SERI ES
U-50EC
UX-120EC
U-100EC
UX-80EC
U-50SEC
U-50SDEC
AI MCO / 1 - 800- 852-1 368 75 AI MCO / 1 - 800- 852-1 368
MODEL FREE LENGTH ANGLE HEAD CENTER WEIGHT SQUARE NOISE AIR
TORQUE RANGE SPEED HEIGHT TO OUTSIDE DRIVE LEVEL USAGE
Nm ft-lb rpm mm in mm in mm in lb kg in dB(A) cfm
UAN-611RM-60C 6.5 - 12.0 4.3 - 8.6 620 383 15.1 47.0 1.9 14.0 0.6 3.5 1.6 3/8 80 21.1
UAN-611RM-50C 8.5 - 15.0 5.7 - 10.8 470 373 14.7 47.0 1.9 14.0 0.6 3.5 1.6 3/8 80 21.1
UAN-611RM-40C 10.0 - 18.0 9.3 - 12.9 400 373 14.7 47.0 1.9 14.0 0.6 3.5 1.6 3/8 80 21.1
UAN-611RM-30C 13.0 - 25.0 9.3 - 18.0 270 373 14.7 47.0 1.9 14.0 0.6 3.5 1.6 3/8 80 21.1
UAN-701RM-60C 20.0 - 31.0 14.8 - 22.8 600 445 17.5 47.0 1.9 14.0 0.6 5.3 2.4 3/8 85 31.6
UAN-701RM-40C 28.0 - 45.0 20.7 - 33.2 400 455 17.9 51.0 2.0 18.0 0.7 5.3 2.4 3/8 85 31.6
UAN-701RM-30C 37.0 - 60.0 27.3 - 44.2 300 455 17.9 60.5 2.4 18.0 0.7 5.3 2.4 1/2 85 31.6
MODEL FREE LENGTH WEIGHT MIN/MAX HEX NOISE AIR
TORQUE RANGE SPEED SOCKET SIZE LEVEL USAGE
Nm ft-lb rpm mm in lb kg mm in dB(A cfm
MONITOR STALL
UOW-M11-10 3.9 - 12.7 2.9 - 9.4 150 352 13.8 4.4 2.0 7 - 12 1/4 - 7/16 75 12.5
UOW-M11-14 4.9 - 15.7 3.6 - 11.6 110 368 14.5 5.3 2.4 10 - 17 3/8 - 5/8 75 12.5
UOW-M11-30 9.8 - 31.4 7.2 - 23.1 65 404 15.9 6.8 3.1 17 - 32 5/8 - 1-3/16 75 12.5
MONITOR SHUT-OFF CLUTCH
UOW-T60-10M 3.9 - 12.7 2.9 - 9.4 150 415 16.3 4.6 2.1 7 - 12 1/4 - 7/16 75 18.0
UOW-T60-14M 4.9 - 16.7 3.6 - 12.3 110 430 16.9 5.5 2.5 10 - 17 3/8 - 5/8 75 18.0
UOW-T60-22M 6.9 - 23.5 5.1 - 17.4 85 445 17.5 5.5 2.5 13 - 24 1/2 - 7/8 75 18.0
UOW-T60-30M 9.8 - 31.4 7.2 - 23.1 65 445 17.5 7.0 3.2 17 - 32 5/8 - 1-3/16 75 18.0
For complete socket selection and custom sockets please contact AIMCO. Specify hex size of gear socket when ordering.
To monitor or control - requires a controller: UEC-4800 (see page 76)
UEC-4500 (see page 77)
Cable from tool to UEC controller included with tool
External solenoid valve required to control tool (part #909-749-0)
UOW-M SERIES
UAN-611RM SERIES
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
TRANSDUCERI ZED ANGLE AND TUBENUT
AI MCO / 1 - 800- 852-1 368 76 AI MCO / 1 - 800- 852-1 368
Full-Featured, State-of-the-Art Control
for Pulse and Continuous Drive Tools
FEATURES: UEC-4800
Programmable from front panel or PC
no separate Teachpad module or cable required
12000 data point memory
On-screen statistical readout
8 parameter sets available
Increased programmable I/O options
Built-in ethernet connectivity
PC Windows based software included
For use with pneumatic or electric
transducerized tools
FEATURES: UEC-4800TP
All features of the UEC-4800
Enhanced user interface via Touch-Screen
programming and information access
UL-MC Pneumatic Series
The UEC-4800 controller works with the following
transducerized tools:
UAN-Series UEP-MC Electric Seriess UOW-Series
UEC-4800TP Controller
with Touch-Screen option.
UEC-4800
The differences between tightening a fastener by either
the nut or bolt head can have a great influence on final
torque and clamp load. Factors such as joint materials,
hole dimensions, component dimensions and component
finishes can affect the final tightening results. It is
important that the proper method be specified based on
initial design and testing of the joint.
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
UEC- 4800 CONTROLLER
AI MCO / 1 - 800- 852-1 368 77 AI MCO / 1 - 800- 852-1 368
ADDI TI ONAL FEATURES
Torque control
Pulse count control
(Pulse tools only)
Angle monitor/control
(Nutrunners only)
4 parameter sets
Statistical reports
Visual/audible cycle
indicators
Multiple I/O ports
Fastener counting
Small size and footprint
External or PC setup
LENGTH WIDTH HEIGHT WEIGHT
in in in lb
9.4 8.7 3.5 5.5
ITEM PART NUMBER USE
Sensor Cable Assembly 909-921-0
Connects between tool and main controller
6 meters Lengths up to 60 ft are available
Dual Controller Board Cable 910-215-0 Connects dual controller to tool
Dual Controller Board 910-201-0
Printer Board 910-202-0 To be used if two or more boards are required
Complete with flat cable 910-211-0
Option Box 910-209-0 If two or more option boards are required
Option Box Cable 910-207-0 Connects between main controller and option box
Output Board 910-205-0
Input Board 910-204-0
RS232C Board 910-203-0
Option Box Flat Cable 910-211-0 If two or more boards are installed in option box,
the flat cable is required to connect them together
Main Controller Flat Cable 910-210-0
Cable 910-622-0 Cable from driver box to controller
AIMCO Acra-Pulse
Pneumatic Pulse Tools

AIMCO Omega Electric Pulse Tools
AIMCO Pneumatic Nutrunners
UEC-4500 OPERATES THESE CONTROLLED TOOLS:
Controller Box (UEC-4500)
Teachpad (910-208-0)
Teachpad Cable (910-206-0)
REQUIRED COMPONENTS
Affordable, Basic Torque-Control
for AIMCO Transducerized Tools
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
UEC- 4500 CONTROLLER
AI MCO / 1 - 800- 852-1 368 78 AI MCO / 1 - 800- 852-1 368
Flexible Poka-Yoke for
Quality and Line Control
FEATURES I NCLUDE
Verify your assembly procedures are being followed
Up to four joints with one tool and one ATM
Communicates with your line and computers
Audible and visual indications
Verification of good cycle without torque values
Bolt counting
Line control
Outputs for lights or alarms
COMMUNI CATI ON AND LI NE CONTROL
PLC communication inputs (5)/outputs (8)
Remote parameter switch selection
Variable relays for interfacing with process
equipment
Optional network interfaces available
SI MPLI CI TY
Programming from PC or keypad
Simple set-up for minimal training requirements
Auto calibration
Available for 110V or 220V incoming power
Additional AC outlet for auxiliary power
Incoming power fused for protection
PROCESS VERI FI CATI ON
Accept/Reject indication on all rundowns
Four selectable parameters
Cycle counting and batch counting
Visual and audible indicators
Programmable timers for detection of double hits,
cross-threads, or premature trigger release
WHAT DO I NEED?
For a complete turnkey system:
New or retrofitted TM tool
Monitor Box
HOW TO ORDER
Retrofit most existing AIMCO tools for under $200.
Contact your AIMCO representative for details
Order TM tools by adding TM to model number
(For example, ULT-70 becomes ULT-70TM)
ATM-1-1Tightening Monitor
FOR USE WITH TOOLS WITH TM FEATURE
INSTALLED:
AIMCO Pulse Tools
AIMCO Angle Nutrunners
AIMCO Clutch Screwdrivers
All Omega or AcraPulse
Tools
All Pistol or Lever-Start Screwdrivers
All AIMCO Pneumatic Nutrunners
UTM-1500 Series Fastening Counter
C
O
N
T
R
O
L
L
E
D

T
O
O
L
S
TI GHTENI NG MONI TOR AND TM TOOLS
AI MCO / 1 - 800- 852-1 368 79 AI MCO / 1 - 800- 852-1 368
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
TORQUE MEASUREMENT
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-82
Auditor
TM
Torque Cube
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Auditor
TM
Desktop Torque Testers . . . . . . . . . . . . . . . . . . . . . . 84
Auditor
TM
Torque Data Analyzer/Collector. . . . . . . . . . . . . . . . 85
Auditor
TM
ATST Series Analyzers/Collectors . . . . . . . . . . . . . . 86
Auditor
TM
Brushless Rotary Transducers. . . . . . . . . . . . . . . . . 87
Auditor
TM
Rotary Transducers . . . . . . . . . . . . . . . . . . . . . . . . 88
Auditor
TM
Stationary Transducers. . . . . . . . . . . . . . . . . . . . . . 89
AcraJoint Tool Test Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Joint Simulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Torque Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TORQUE MEASUREMENT
AI MCO / 1 - 800- 852-1 368 80 AI MCO / 1 - 800- 852-1 368
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
TORQUE MEASUREMENT: OVERVI EW
Torque measurement and the verification of torque tools and applied
torque are an integral part of todays threaded assembly process.
The method used to measure torque can effect the judgments made regarding tool performance,
assembly processes and overall product quality.
Metal Metal
Metal Metal
Metal
Gasket
Dynamic Torque: 15 Nm Residual Torque: 12 Nm Dynamic Torque: 15 Nm Residual Torque: 18 Nm
A hard joint, one requiring a low degree of rotation
during tightening, will normally show very little relaxation
after tightening. Due to the high amount of remaining
clamp load and friction within the joint members,
additional movement of the fastener requires additional
torque energy to be applied. Therefore Residual Torque
values will be higher than Dynamic Torque values.
A soft joint, one requiring a high degree of rotation during
tightening, will normally show signicant amounts of
relaxation after tightening. Relaxation leads to a loss of
clamp load and friction within the joint members. Due to
this relaxation, additional movement of the fastener
requires relatively small amounts of additional torque
energy and Residual Torque values will be lower than
Dynamic Torque values.
Less than 30 degrees
of rotation
720 degrees or more
of rotation
Metal
DYNAMI C TORQUE
The torque produced during the actual tightening process,
normally measured using rotary transducers and a torque
analyzer.
Advantages:
Reduces operator influence
Measures applied torque
Can also include angle of rotation as error proofing
parameter
RESI DUAL TORQUE
The torque measured by producing an incremental
amount of movement of the fastener after the actual
tightening process, normally measured using a dial
or digital torque wrench.
Advantages:
Easy access to fasteners Error proofing
Can detect missed fasteners
or joints with significant relaxation
HARD JOINT SOFT JOINT
Values as examples only Values as examples only
OR
AUDIT METHOD
OR
AUDIT METHOD
Metal
Gasket
Metal
AI MCO / 1 - 800- 852-1 368 81 AI MCO / 1 - 800- 852-1 368
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
BEFORE ASSEMBLY Tool Capability
Is the tool working correctly?
Testing and verifying tools under controlled conditions. Identify the
accuracy & repeatability of the tool before using it in actual production.
The equipment used for this phase would be:
Desktop testers with internal transducers
Auditor
TM
analyzers with either stationary or rotary transducers
UFT hydraulic joint simulators for use with rotary transducers
DURI NG ASSEMBLY Process Capability
How does the tool work with the product being assembled?
Testing the tools during the actual process helps insure that the process is
working correctly. This is the step where variables in the parts and
influences from the operator can be accounted for.
Torque Data Collectors/Analyzers
Auditor
TM
Rotary Transducers
Transducerized Wrenches/Nutrunners
AFTER ASSEMBLY Product Capability
Does the finished product meet the users expectations?
Checking the product after assembly is the final chance to check the product
prior to delivery to the user. This is the way to verify that product quality is
satisfactory.
Click/Dial wrenches
Electronic wrenches with Auditor
TM
analyzers
Rotary transducers and Auditor
TM
analyzers with hand driver
to move fastener
Torque Measurement Before, During, and After Assembly Ensures
Quality Manufacturing
Proper torque measurement is critical in many assembly operations. AIMCO utilizes years of
experience to help design a process around your specific auditing requirements. From simple dial
wrenches to electronic data collectors and joint analyzers for R&D, AIMCO is with you every step
of the way.
PRODUCTS TO USE...
It is recommended to measure and record torque
values during each of the three areas Before,
During and After assembly. Each area is related to
the others, but the values generated are independent
and will not be equal. These differences should be
expected and are due to the varying measurement
methods and joint conditions that occur at each step
of the assembly process.
AI MCO / 1 - 800- 852-1 368 82 AI MCO / 1 - 800- 852-1 368
MEASURI NG QUALI TY PROCESS CAPABI LI TY
Statistical analysis is an important step in any quality control process.
One of the most widely accepted statistical indicators of process quality, and therefore product quality, is Cpk, or the
process capability for a centered process. This value indicates how capable a process is and whether the results of
that process are properly centered near a specific target. A capable process is one that approaches, as a limit, 100%
perfect product.
Cpk is a statistical value that indicates how tightly grouped a series of samples is around the target value. Cpk is a
function of the upper specification limit (USL), the lower specification limit (LSL), the mean of the samples and the
standard deviation () of the samples.
Cpk = either (USL - Mean) or (Mean - LSL), whichever is smaller
An acceptable, or capable, process will normally have a Cpk value of at least 1.33.
(3 x ) (3 x )

TARGET

MEASURI NG QUALI TY CLAMP LOAD
The purpose of threaded fastening is to produce the correct amount of
clamp load within the joint.
Due to the cost and difficulty of measuring clamp load during the actual
assembly process, torque is used as the control parameter during tightening.
Many manufacturers use torque values as the primary indicator of threaded
assembly quality. However, achieving repeatable clamp load is a better
indicator of joint quality.
Studies have shown that discontinuous drive tools can produce equal or
better clamp load results when compared to continuous drive tools.
TORQUE
BOLT
TENSION
CLAMP
LOAD
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
AI MCO / 1 - 800- 852-1 368 83 AI MCO / 1 - 800- 852-1 368
AUDITOR
TORQUE CUBE
The Cube is a great entry level tester that packs many features
into a small portable package. Versatile mounting design makes
testing of pistol or inline tools simple. Belleville washer joint kits
allow for easy conguration of hard, medium or soft joint rates.
FEATURES
Simple, easy-to-use, portable tester
Intuitive Auditor
TM
Series menu structure for quick start-up
Bidirectional accuracy of 1% of indicated reading within top
90% of full scale
Eight (8) available engineering units:
oz-in, lbf-in, lbf-ft, Nm, Ncm, kgf-cm, gf-cm, kgf-m
3 modes of operation:
Track, Peak and 1st Peak
Selectable power tool filtering:
125Hz, 250Hz, 500Hz, 1000Hz and 1500Hz
RS-232 output
NiMh rechargeable batteries provide a minimum of
8-10 hours of continuous use
For testing of power tools, click, dial and digital wrenches
SPECIFICATIONS
OPTIONAL ACCESSORY
RS232C - RS232 Cable to Serial (DSUB9)
Connect your CUBE to a serial printer or PC
ATC-25 2.5 - 25 .28 - 2.8 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25
ATC-100 10.0 -100 1.3 - 11.3 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25
ATC-250 25.0 - 250 2.8 - 28.25 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25
ATC-500 50.0 - 500 5.6 - 56.5 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25
MODEL RECOMMENDED TORQUE RANGE WEIGHT W x H x D W x H x D
in-lb Nm lb kg
mm in
Cp, process capability without reference to a centered
process, is often used in conjunction with Cpk. It is
possible to have a fastening process with a high Cp
value and a low Cpk if torque values are grouped tightly
but are not grouped around a centered target
specification.
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
AUDI TOR
TM
TORQUE CUBE
TM
AI MCO / 1 - 800- 852-1 368 84 AI MCO / 1 - 800- 852-1 368
AUET / MTM-10-100 1.0 - 10 in-lb 10 - 100 in-lb 0.11 - 1.12 Nm 1.3 - 11.3 Nm
AUET / MTM-50-500 5.0 - 50 in-lb 50 - 500 in-lb 0.56 - 5.65 Nm 5.65 - 56.49 Nm
MODEL RECOMMENDED TORQUE RANGE
Transducer 1 Transducer 2 Transducer 1 Transducer 2
Dual Transducer Models
AUDITOR
SERIES UET TORQUE TESTERS

Quickly, easily and precisely check the torque on your tools with
Auditor
TM
AUET and AUET/MTM torque testers from AIMCO.
The Auditor
TM
Series enables you to adjust your tool on hard, medium
or soft joint rates. Auditor
TM
testers are available in single (AUET) or
dual (AUET/MTM) transducer styles to provide exibility and
true value for your testing budget.
Using torque measurement equipment before assembly is
typically used for tool setup and tool capability studies.
For tool setup, the tool crib will want to set the tool close to the
torque required by the application. For tool capability studies,
one can ensure that the tool can provide the necessary torque with
required repeatability.
FEATURES
Adjustable auto-clear feature
Keylock security prevents unauthorized programming changes
Provides data output to computers or serial printers via serial
communication
Uses AC power or NiMh batteries
Multiple transducer models available with any combination of two
standard transducers from 100 in-oz to 1600 in-lbs
MTM models supplied with external transducer port
Verify torque settings and repeatability of hand tools, power tools,
and pulse tools
Easy and convenient to use with one button operation
Push-button zero to quickly re-zero instrument reading
Four modes of processing torque signals:
Peak: Records & displays highest torque peak
First Peak: Records & displays first torque peak
Track: Displays all torsional strain applied to transducer
in real time (no memory)
Pulse: Records accurate peak value achieved by hydraulic
pulse tools
Repeatable joint simulator included
Selectable engineering units with 8 available scales
Selectable frequency response provides filtering for testing different
types of torque tools
AUET-0100 10 - 100 in-oz 0.7 - 7.2 kgf-cm
AUET-10 1 - 10 in-lb 1.1 - 11.5 kgf-cm
AUET-050 5 - 50 in-lb 0.5 - 5.6 Nm
AUET-100 10 - 100 in-lb 1.1 - 11.3 Nm
AUET-250 25 - 250 in-lb 2.8 - 28.3 Nm
MODEL RECOMMENDED TORQUE RANGE
Single Transducer Models
AUET / MTM
AUET
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
AUDI TOR
TM
DESKTOP TESTERS
AI MCO / 1 - 800- 852-1 368 85 AI MCO / 1 - 800- 852-1 368
AUDITOR
TORQUE DATA ANALYZER

Light weight and portable for production-line auditing
16 hour continuous-use battery life
Battery is field serviceable no need to send to AIMCO for battery
replacement
Monitors torque, angle & pulse count
Track, Peak, First Peak and Pulse modes for use with all types of
assembly tools
Programmable frequency response
Memory storage of 999 data points
Visible indication of OK or NOT OK rundowns
Display of X-bar, Sigma, Cp & Cpk statistical values
Serial data output
IS style transducer compatibility through interface cable
Statistics Display
ATDA
AUDITOR
TORQUE DATA COLLECTOR

The Auditor
TM
Torque Data Collector includes all of the features of the
Auditor
TM
Torque Data Analyzer (ATDA) and:
File set-up capability- allows naming separate files and saving torque
data into specific files
Advanced job set-up set up groups of fasteners on a specific
application as well as groups of applications on a specific product
Touch-screen makes set-up and use fast and easy
Move-on feature for precise measurement when used for residual
audits.
Menu structure and terminology identical to that of other Auditor
TM
torque measurement products, making set-up familiar and easy for
any operator.
Memory capacity for up to 250,000 data samples
Auditor
TM
PC software, provided at no charge, allows fast set-up, as
well as data analysis and downloading, from the ATDC
The Auditor
TM
Torque Data Collector is the most advanced torque
measurement device offered by AIMCO. The ATDC combines the
extensive features of the ATDA with increased memory and filing
capability and advanced measurement features to provide the most
comprehensive torque measurement product on the market. Touch-
screen capability and alpha-numeric entry make the easy-to-use
Auditor
TM
menu structure even easier to access and configure. When the
light-weight ATDC is combined with the Auditor
TM
line of brushless
rotary transducers, the result is an extremely mobile, durable and
functional torque auditing system that can handle the most detailed
auditing processes.
ATDC
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
AUDI TOR
TM
TORQUE DATA ANALYZER/COLLECTOR
AI MCO / 1 - 800- 852-1 368 86 AI MCO / 1 - 800- 852-1 368
Auditor
TM
Model I (ATST-01) Auditor
TM
Model II (ATSTA-02) Auditor
TM
Model III (ATST-03) Auditor
TM
Model IV (ATSTA-04)
Auditor
TM
Plus Model I (ATST-01PL) Auditor
TM
Plus Model II (ATSTA-02PL) Auditor
TM
Plus Model III (ATST-03PL) Auditor
TM
Plus Model IV (ATSTA-04PL)
6 Languages

Transducer file

Impulse mode

Click mode

Peak mode

Track mode

Cycle end timer

Auto print mode

Measure mode

Statistical analysis

Password

Auto power off

Back light

Date/time clock

Angle

Pulse count

File capability 250

Rounds

PC support

Cause code field

20,000 samples

BASIC UNITS DATA COLLECTORS
FEATURES MODEL/PART # MODEL/PART # MODEL/PART # MODEL/PART #
SPECI FI CATI ONS
AUDITOR
TM
A/D accuracy + 0.2% of FSD
LCD display is 4 rows by 16 columns
alphanumeric supertwist with backlight
NiCd battery provides 8 hours of continuous use;
8 hour recharge time
Serial port baud rate selectable from 300 to
19,200
Data memory backed up with internal battery
Comes with carrying case, operations manual,
communication cable, battery charger, and
shoulder strap
Weight: 3.5 lbs.; Dimensions: 9.3 in. L x 5.4 in. W
AUDITOR
TM
PLUS
16 hours of continuous use & only 1.5 hour
charging time
Wont develop memory set, eliminating the
need for battery management
Can be operated on partial charge or directly
plugged into AC power
FEATURES
Provides quick, easy, and accurate:
Testing of pulse tools
Testing of continuous drive tools
Online monitoring of fastening process
Auditing of assembled joints
Verifying accuracy of hand tools
Four Auditor
TM
models available with either standard or
Plus battery technology:
Auditor
TM
: Torque Analyzer with sequential memory
of 200 samples
Auditor
TM
II: Torque/Angle/Pulse Count Analyzer with
sequential memory of 200 samples
Auditor
TM
III DC: Torque Analyzer/Data Collector with
memory capability of up to 250 files with 20,000
samples
Auditor
TM
IV DC: Torque/Angle/Pulse Count
Analyzer/Data Collector with memory capability of up
to 250 files with 20,000 samples
Provides Cp, Cpk, X-Bar, Range & Sigma values
Each file can store the application name, acceptable
conditions, parameter settings, rundown data, and
statistical information
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
AUDI TOR
TM
ATST SERI ES ANALYZERS/COLLECTORS
AI MCO / 1 - 800- 852-1 368 87 AI MCO / 1 - 800- 852-1 368
DRIVE MAX TORQUE PART NUMBER LENGTH THICKNESS WIDTH SIDE TO CENTER WEIGHT
in in in in lb
1/4" Hex 1 Nm 8.9 in-lb ABRT-25H-1 4.0 2.1 1.6 0.68 0.5
1/4" Hex 2 Nm 17.7 in-lb ABRT-25H-2 4.0 2.1 1.6 0.68 0.5
1/4" Hex 5 Nm 44.3 in-lb ABRT-25H-5 4.0 2.1 1.6 0.68 0.5
1/4" Hex 10 Nm 88.5 in-lb ABRT-25H-10 4.0 2.1 1.6 0.68 0.5
3/8" Sq. 75 Nm 55 ft-lb ABRT-38S-75 3.6 2.8 1.6 0.68 0.8
1/2" Sq. 200 Nm 148 ft-lb ABRT-50S-200 4.0 2.8 1.6 0.68 1.0
3/4" Sq. 500 Nm 370 ft-lb ABRT-75S-500 6.8 4.9 3.5 1.75 2.9
3/4" Sq. 750 Nm 553 ft-lb ABRT-75S-750 6.8 4.9 3.5 1.75 2.9
1" Sq. 1500 Nm 1107 ft-lb ABRT-100S-1500 TBA TBA TBA TBA TBA
THE MOST DURABLE ROTARY TANSDUCERS
AVAI LABLE
Brushless technology means no brushes to wear or bounce.
No Strain Gauges no concerns about adhesive failure or
contact failure through fatigue.
Unaffected by vibration: eliminates concerns
about shorts from loose brush blocks.
Industry Standard style is designed
to work with AIMCOs Auditor
TM
and UET/MTM series of testers.
Also for other brands of torque
analyzers or data collectors.
Includes a military type connector
with a torque signal of 2 mv/v excitation.
APPLI CATI ONS
For use with pulse tools, stall tools, right angle nutrunners,
impact wrenches, screwdrivers, multiples, and DC powered
tools.
Tool Qualification Test tools in the tool crib or after repair.
Process Qualification Test tools on the line; dynamic torque
testing inline with application.
Quality Audits Perform residual torque audits to assure
joint and product quality.
Hex drive models utilize precision ring design All transducers require separate cable
ABRT9110-3 For Auditor
TM
Display
ICBL-5000 For UET Series
Auditor
TM
Brushless Rotary Transducers
Accuracy: Better than +/- 0.5% of FSD
(ringed*); +/- 1.0% (ringless)
Zero Drift: Less than +/- 0.04% of FSD
per degree Celsius
Overload Capacity: 150% FSD
Drag Friction: Less than 0.75% rated
torque or 0.1 Nm
SPECIFICATIONS
Filter Frequency is a setting on high-quality torque
measurement devices that allows electronic noise to be
filtered out of the torque signal. A proper setting will
result in the most accurate and repeatable torque values
for a specific tool. Common starting points for Filter
Frequency are approximately 500 Hz for continuous drive
and manual tools and approximately 1000 Hz for
discontinuous drive tools.
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
BRUSHLESS ROTARY TRANSDUCERS
AI MCO / 1 - 800- 852-1 368 88 AI MCO / 1 - 800- 852-1 368
DRIVE MAX TORQUE SMART PART NUMBER IS PART NUMBER TORQUE LENGTH THICKNESS WIDTH WEIGHT
ANGLE* (A) (B) (C) lb
1/4" Hex 2 Nm 18 in-lb ARTU-25H-2T ARTIS-25H-2T A 4.6" 1.1" 2.2" 1.0
1/4" Hex 10 Nm 88 in-lb ARTU-25H-10T A 4.6" 1.1" 2.2" 1.0
1/4" Sq. 10 Nm 88 in-lb ARTU-25S-10T ARTIS-25S-10T A 2.9" 1.1" 2.2" 1.0
1/4" Sq. 20 Nm 180 in-lb ARTU-25S-20T A 2.9" 1.1" 2.2" 1.0
3/8" Sq. 25 Nm 225 in-lb ARTU-38S-25T A 3.0" 1.1" 2.4" 1.2
3/8" Sq. 75 Nm 50 ft-lb ARTU-38S-75T ARTIS-38S-75T A 3.0" 1.6" 2.7" 1.2
3/4" Sq. 250 Nm 180 ft-lb ARTU-75S-250T A 4.1" 2.0" 3.1" 2.2
1" Sq. 750 Nm 550 ft-lb ARTU-100S-750T A 4.9" 2.4" 3.6" 4.0
1" Sq. 1400 Nm 1025 ft-lb ARTU-100S-1400T ARTIS-100S-1400T A 4.9" 2.4" 3.6" 4.0
*Add this suffix to the end of the part number to indicate torque or torque/angle transducers
ROTARY TRANSDUCERS
FOR DYNAMI C OR RESI DUAL TESTI NG
No brush bounce when used with pulse tools, stall
tools, right angle nutrunners, screwdrivers, multiples,
and DC powered tools.
Torque or torque/angle models available in sizes from
2 to 5000 Nm (15 in-lb to 3690 ft-lb).
Small compact design,which allows use in limited
access areas.
Rugged aluminum alloy housing.
TWO STYLES AVAI LABLE SMART & I S
Smart style incorporates a smart chip for
plug-n-play operation with Auditor
TM
Analyzer
IS (Industry Standard) style is designed to work with
other brands of torque analyzers or data collectors.
Includes a military type connector with
a torque signal of 2 mv/v excitation
Auditor
TM
Rotary Transducers
A Bolt Elongation gauge uses ultrasonic waves to
accurately measure the elongation of a fastener after
tightening. This information can be vital in determining
whether sufficient clamp load is being developed within
a joint. AIMCO can provide this service for testing and
evaluation purposes; simply contact your AIMCO Sales
Representative for more information.
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
ROTARY TRANSDUCERS
AI MCO / 1 - 800- 852-1 368 89 AI MCO / 1 - 800- 852-1 368
DRIVE SIZE MAX TORQUE SMART PART NUMBER IS PART NUMBER BASE DIAMETER HEIGHT
(A) (B) (C)
1/4" 5.6 Nm 50 in-lb ASTU-25D-6 3.9" 3.0"
1/4" 11 Nm 100 in-lb ASTU-25D-11 ASTIS-25D-11 3.9" 3.0"
1/4" 28 Nm 250 in-lb ASTU-25D-28 ASTIS-25D-28 3.9" 3.0"
3/8" 67 Nm 50 ft-lb ASTU-38D-67 3.9" 3.4"
3/8" 135 Nm 100 ft-lb ASTU-38D-135 ASTIS-38D-135 3.9" 3.4"
3/4" 540 Nm 400 ft-lb ASTU-75D-540 3.9" 4.4"
1" 1695 Nm 750 ft-lb ASTU-100D-1700 ASTIS-100D-1700 3.9" 4.8"
STATI ONARY TRANSDUCERS
FOR TORQUE TESTI NG AND CALI BRATI ON
Industrial transducers used in tool crib and production
applications for hand & power tools
Precision female square drives to facilitate testing
Available in 1/4" to 1" square drive
Heavy-duty stainless steel allows 140% overload
capacity
Metrology transducers used as master transducers in
metrology labs only (Contact AIMCO Customer
Service for more information)
TWO STYLES AVAI LABLE SMART & I S
Smart style incorporates a smart chip for
plug-n-play operation with Auditor
TM
Analyzer
IS (Industry Standard) style is designed to work with
other brands of torque analyzers or data collectors.
Includes a military type connector with
a torque signal of 2 mv/v excitation
Stationary Transducers (Joint kits purchased separately)
ALL MODELS
Accuracy: Better than 1% of FSD
Zero Drift: Less than 0.1% of FSD per degree Celsius
Coil Cable: 1 meter strain relieved cable on Smart models only
ROTARY MODELS
Drag Friction: Less than 1% rated torque or 0.1 Nm
STATI ONARY MODELS
Accuracy: Metrology models better than 0.25% IR
Mounting: 4 Holes of 8.3 mm diameter on 80 mm circle diameter
ROTARY AND STATIONARY TRANSDUCERS
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
STATI ONARY TRANSDUCERS
AI MCO / 1 - 800- 852-1 368 90 AI MCO / 1 - 800- 852-1 368
FEATURES
For pulse and gear driven tools by
utilizing lock/twist release air valve and
air flow regulator
Tests accuracy and repeatability of pulse
tools without requiring reversing less
tool wear
Ensures safe cycle testing of gear driven
tools with manual brake operation through
palm button or foot switch
No reversing required resets with
the simple release of palm button or
foot pedal
Rotary transducers can be mounted inside
the fixture
Protects the transducer
Eliminates any side loading that may
influence test results or cause premature
wear of the transducer.
Equipped with air flow regulator allowing
resistance adjustment by technician
Safe and convenient operation of
continuous drive nutrunners with built-in
tool rest and reaction fixture
Reduces tool and transducer wear with
cushioned resistance no hard slam
For Testing Pulse Tools and Continuous Drive Tools
AJT-080 7.4 - 59.0 10 - 80 3/8 35 15.9 381 x 254 x 254
AJT-275 37.0 - 203.0 50 - 275 1/2 45 20.4 457 x 305 x 254
Recommended air hose size: 1/4"
Recommended air pressure: 90 PSI
MODEL CAPACITY SQ. DRIVE WEIGHT L x W x H
ft-lbs Nm in lbs kg mm
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
ACRAJOINT TOOL TEST STAND
The International Organization for Standardization (ISO)
published ISO 5393 to suggest the methods for testing
and evaluating continuous drive powered assembly tools
that are used for installing threaded fasteners. The UFT
Joint Simulator matches all ISO 5393 requirements!
AI MCO / 1 - 800- 852-1 368 91 AI MCO / 1 - 800- 852-1 368
UFT SERI ES JOI NT SI MULATORS
AIMCOs UFT Joint Simulators offer the most
repeatable and linear joint rate simulation of any
product on the market.
Pulse tool and continuous drive tool certification and
testing.
Consist of a bolt-tightening body and a hydraulic
pressure loading mechanism. A hydraulic pressure
circuit connects these two bodies.
Ideal for ISO 5393 test procedures.
Four joint rates can be easily and quickly simulated by
opening or closing two external valves.
Specially coated testing bolt produces over 100,000
cycles without variation or deformation.
MODEL BOLT TORQUE SNUG A-JOINT B-JOINT C-JOINT D-JOINT CENTER TO OUTSIDE WEIGHT
SIZE RANGE TORQUE RATE RATE RATE RATE X HEIGHT
ft-lb Nm Nm Nm/deg Nm/deg Nm/deg Nm/deg mm lb kg
UFT-S10 M6 5 - 11 6.7 - 14.7 2.7 0.36 0.10 0.04 0.02 76 x 203 43 19.5
M8 11 - 23 14.7 - 31.4 7.5 0.79 0.26 0.06 0.03
M10 23 - 40 31.4 - 53.9 14.9 1.22 0.35 0.09 0.06
UFT-S16 M12 40 - 65 53.9 - 88.2 27.5 1.80 0.51 0.22 0.09 97 x 256 88 40
M14 65 - 110 88.2 - 149 44.0 2.70 0.79 0.22 0.14
M16 110 - 140 149 - 190 73.5 4.70 1.22 0.35 0.21
UFT-24* M18 140 - 217 190 - 294 138 x 171 108 49.1
M20 217 - 325 294 - 441
M24 325 - 506 441 - 686
* UFT-24 medium hard/soft joints only
Reaction fixture for continuous drive tools not included. Sockets included.
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
JOI NT SI MULATORS
AI MCO / 1 - 800- 852-1 368 92 AI MCO / 1 - 800- 852-1 368
FEATURES
CartWare
TM
AIMCO-designed software package
allows rundown collection, data collection and statistical
analysis of a wide range of assembly tools
Use for tool testing, assembly line audits, tool calibration
and tool certification
Joint Simulators Feature industry-standard UFT Series
hydraulic joint simulators; the most repeatable and durable
joint simulators available on the market
Auditor
TM
Rotary Transducers tested and proven strain-gauge
rotary transducers allow auditing and calibration of any type of
torque control tool, including pulse tools, continuous drive
tools, manual wrenches and click wrenches
Removable reaction bars included for each joint simulator for
use with high torque continuous drive tools
Allows the user to properly test both continuous and
discontinuous tools with our hydraulic joint simulators (UFT)
Mobile, self-propelled cart with forward and reverse speeds,
and an extremely tight turning radius allows access to
important assembly line areas
Charger configured for 115 VAC or 230 VAC supply voltages
TORQUE CART
Torque validation is an important step in quality control, and all
torque tools and equipment should be audited frequently.
The AcraDyne
torque cart offers the perfect solution to on-line

auditing for all types of torque tools, while minimizing tool
down-time and off-line travel to the auditing lab. The result is the
ability to conveniently audit torque tools more frequently and thus
maintain a higher level of quality control. We bring the test
equipment to the application.
The AcraDyne
torque cart is a compact, easy-to-use,

ergonomically-designed product that is suited to adapt to any type
of assembly area. While housing the most accurate validation
equipment available on the market, its compact design and self-
propelled drive make it easy to maneuver in the tightest assembly
areas. Its on-board electronics allow for simple use and reliable
data storage.
AIMCO can design a custom mobile or stationary
torque validation system for you today!
Contact your AIMCO sales representative for details.
CartWare
TM
UFT Joint Simulator
TORQUE CART
T
O
R
Q
U
E

M
E
A
S
U
R
E
M
E
N
T
Mobile torque cart
with touch-screen monitor
Touch-screen option available
ASSEMBLY SYSTEMS
Screw Presenters: Overview. . . . . . . . . . . . . . . . . . . . . . . . . 94
A-50 Screw Presenters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Robotic Screw Presenters . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Compact Robotic Screw Presenters . . . . . . . . . . . . . . . . . . . 95
AI MCO / 1 - 800- 852-1 368 93 AI MCO / 1 - 800- 852-1 368
A
S
S
E
M
B
L
Y

S
Y
S
T
E
M
S
ASSEMBLY SYSTEMS
AI MCO / 1 - 800- 852-1 368 94 AI MCO / 1 - 800- 852-1 368
For semi-automated assembly, look no further
AIMCO AcraFeed
screw presenters provide:

PRODUCTI VI TY
One-hand operation eliminates manual handling of screws
Screw is presented to operator for easy magnetic or
vacuum pickup
Keeps workspace clear of dropped fasteners
Quick feed rate from oscillating hopper design
up to two screws per second
Large hopper holds about 1000 1500 fasteners
Solid design no tie downs or straps needed
FLEXI BI LI TY
Perfect for contract or dedicated assembly
Switch rails in minutes for different screw sizes
ERGONOMI CS
The tool does the job for fewer arm and hand movements
RELI ABI LI TY
Heavy-duty industrial design
Modular design for easy repairs
QUALI TY
Uses your existing or our new torque control drivers
Keeps stray fasteners from getting into assemblies
Load screws into the hopper.
There is no side to load unit
and no gates to limit capacity.
Address screw with
magnetized bit.
Bring screw to workpiece
and fasten parts.
FASTENI NG I N 3 EASY STEPS
AcraFeed
Screw Presenter
1 2 3
A
S
S
E
M
B
L
Y

S
Y
S
T
E
M
S
SCREW PRESENTERS: OVERVI EW
AI MCO / 1 - 800- 852-1 368 95 AI MCO / 1 - 800- 852-1 368
Compact Robotic Screw Presenters
MODEL ADDITIONAL RAIL SCREW SIZE MAX. SCREW LENGTH
Part No in mm in mm
A-50A-0 AR-0 #0 1.4 .39 10
A-50A-1.7 AR-1.7 1.7 .39 10
A-50B-1 BR-1 #1 2.0 .75 18
A-50B-2 BR-2 #2 2.3 .75 18
A-50B-3 BR-3 #3 2.6 .75 18
A-50B-4 BR-4 #4 3.0 .75 18
A-50C-6 CR-6 #6 3.5 .75 18
A-50C-8 CR-8 #6-8 4.0 .75 18
A-50C-10 CR-10 #10 5.0 .75 18
Dimensions: 5.1" (W) x 8.5" (L) x 5.3" (H) Weight: 7.0 lbs.
Standard Screw Presenters
MODEL PART NO.
Mag-O-Net Bit Magnetizer AM3/16 (3/16" ID)
A-50B Series Bit Guide Protector NJ08004TIN8#23
A-50C Series Bit Guide Protector NJ08004TIN8#45
Optional Accessories
MODEL ADDITIONAL RAIL SCREW SIZE MAX. SCREW LENGTH
Part No in mm in mm
A-50ARBT-0 AR-RBT-0 #0 1.4 .39 10
A-50ARBT-1.7 AR-RBT-1.7 - 1.7 .39 10
A-50BRBT-1 BR-RBT-1 #1 2.0 .70 18
A-50BRBT-2 BR-RBT-2 #2 2.3 .70 18
A-50BRBT-3 BR-RBT-3 #3 2.6 .70 18
A-50BRBT-4 BR-RBT-4 #4 3.0 .70 18
A-50CRBT-6 CR-RBT-6 #6 3.5 .70 18
A-50CRBT-8 CR-RBT-8 #6-8 4.0 .70 18
A-50CRBT-10 CR-RBT-10 #10 5.0 .70 18
Dimensions: 5.1" (W) x 10.8" (L) x 5.3" (H) Weight: 9.2 lbs.
Robotic Screw Presenters
MODEL ADDITIONAL RAIL NOMINAL SCREW SIZE MAX. SCREW LENGTH
Part No. in mm in mm
A-50ARBTC-0 AR-RBTC-0 #0 1.4 .390 10
A-50ARBTC-1.7 AR-RBTC-1.7 1.7 .390 10
A-50BRBTC-1 BR-RBTC-1 #1 2.0 .700 18
A-50BRBTC-2 BR-RBTC-2 #2 2.3 .700 18
A-50BRBTC-3 BR-RBTC-3 #3 2.6 .700 18
A-50BRBTC-4 BR-RBTC-4 #4 3.0 .700 18
A-50CRBTC-6 CR-RBTC-6 #6 3.5 .700 18
A-50CRBTC-8 CR-RBTC-8 #6-8 4.0 .700 18
A-50CRBTC-10 CR-RBTC-10 #10 5.0 .700 18
Dimensions: 7.2" (L) x 4.9" (W) x 5.7" (H) Weight: 6.7 lbs.
WHI CH TO USE?
Standard Screw Presenters
For manual assembly stations where the
operator must otherwise pick up and hold
fasteners by hand
Robotic Screw Presenters
For automated fastening systems or manual
systems using vacuum-assist to pick up non-
ferrous fasteners
Compact Robotic Screw Presenters
For automated systems or manual systems using
vacuum-assist to pick up non-ferrous fasteners
when work space is limited
ROBOTIC COMPACT ROBOTIC
STANDARD
A
S
S
E
M
B
L
Y

S
Y
S
T
E
M
S
A- 50 SCREW PRESENTERS
SELECT THE RIGHT TOOL FOR THE APPLICATION AND ADD THE APPROPRIATE ACCESSORIES TO MAXIMIZE PROFIT POTENTIAL WITH
P.E.R.Q.
Productivity: the speed and efficiency of the assembly process

Ergonomics: the relationship between the worker and the
assembly process
Reliability: the total cost of tool maintenance and repair
Quality: the ability of the tool to adhere to process
requirements
Customers
Assembly
Application
Pneumatic
Tools
Electric
Tools
Cordless
Tools
DC Controlled
Tools
Assembly
Systems
Tool Support
Systems
Fastener Tools
Torque Measurement
Systems
AI MCO / 1 - 800- 852-1 368 96 AI MCO / 1 - 800- 852-1 368
BUILDING AN ASSEMBLY SOLUTION
pg. 105
pg. 98
pg. 102
pg. 104
pg. 105
pg. 100
TOOL SUPPORT SYSTEMS
Balancers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-99
Retractors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Ergo-Arm
Tool Support Systems . . . . . . . . . . . . . . . . . . . . 100

Ergo-Arm
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Linear Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Custom Reaction Devices . . . . . . . . . . . . . . . . . . . . . . . . . 101
Workstation Componenets and Assemblies . . . . . . . . . 102-103
Air Preparation Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Air Line Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
AI MCO / 1 - 800- 852-1 368 97 AI MCO / 1 - 800- 852-1 368
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
AI MCO / 1 - 800- 852-1 368 98 AI MCO / 1 - 800- 852-1 368
ASB-OC
Gravity-Defying and
Hand Adjustable
Balancer
ASB- SERI ES BALANCERS
Built-in Safety Features: The cable, drum and enclosed spring
are fully visible without opening the unit for easy and convenient
safety checks. The sturdier spiral spring is enclosed for greater control
and safety
Ergonomic Spring Release: The automatic safety lock provides
extra control
Extended Cable Length: Stainless steel cables allow for extended
reach on applications
Enhanced Gear Mechanism: Allows for more exact adjustment
of tension
No Recoil and Low Resistance: Tapered drum style provides
gravity-defying tool positioning and low travel
TW-00 1.1- 3.3 lb 0.5-1.5 kg 2.5-3.0
TW-0 1.1- 3.3 lb 0.5-1.5 kg 2.5-3.0
TW-3 2.2- 6.6 lb 1.0-3.0 kg 4.5-6.0
TW-5 5.5-11.0 lb 2.5-5.0 kg 8.0-10.5
TW-9 9.9-19.8 lb 4.5-9.0 kg 15.0-19.0
TW-15 19.8-33.0 lb 9.0-15.0 kg 26.0-32.5
TW-22 33.0-48.4 lb 9-22 kg 41.0-48.0
TW-30 48.4-66.0 lb 22-30 kg 58.0-65.5
TW-40 66.0-88.0 lb 30-40 kg 77.5-87.5
TW-50 88.0-110.0 lb 40-50 kg 100.0-109.5
TW-60 110.0-132.0 lb 50-60 kg 122.0-131.0
TW-70 132.0-154.0 lb 60-70 kg 144.0-153.0
MODEL CAPACITY
Anti-Gravity
Capacity (lbs )
MODEL CAPACITY STROKE WEIGHT
ASB-0C 1.1 - 3.3 lb 0.5 - 1.5 kg 51.1 in 130 cm 1.5 lb 0.7 kg
ASB-3C 3.3 - 6.6 lb 1.5 - 3 kg 86.4 in 220 cm 3.0 lb 1.4 kg
ASB-5C 5.5 - 11 lb 2.5 - 5 kg 86.4 in 220 cm 3.4 lb 1.5 kg
TW-SERIES BALANCERS
TW-0 and TW-00
Gravity Defying / true balance
No tension build-up to cause worker fatigue
Easy external direct drive tensioning
360 degree upper swivel
3.3 ft stranded steel cable 1/8" diameter
(TW-00 cable length 18")
Provision for safety cable
Tool clip included
TW-3 through TW-15
Four models supporting weights
from 2.2 to 33 lb
Tapered drum allows true balance
throughout cable travel
Easy external direct drive tensioning
Cast aluminum casing for durability
Permanent lubrication
360 degree top swivel
4.3 ft of 5/32" diameter stranded steel cable
Safety chain provision
Enclosed spiral spring for added safety
TW-22 through TW-70
Six models supporting weights from 33 to 154 lb
Tapered drum allows for true balance
Cast aluminum housing
Easy external tensioning
Manual drum lock
Permanent lubrication
5 ft of stranded steel 3/16"
Automatic Safety Lock
Enclosed spiral spring for added safety
TW-3 to TW-70
Series
TW-0 & TW-00
Series
ASB-3C & ASB-5C
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
GRAVI TY- DEFYI NG BALANCERS
AI MCO / 1 - 800- 852-1 368 99 AI MCO / 1 - 800- 852-1 368
RMA-L Series
RPA Series
RETRACTORS
RPA Series
No tools needed for setting of tension
5 ft nylon coated steel cable
Reinforced hanging bracket includes
provision for safety cable
Adjustable cable stop
3 models support weight 0.5-5 lb
Tool clip included
RMA-L Series
Steel housing with polyester finish
Reinforced hanging bracket includes provisio
for safety cable
8 ft of 3/32" diameter coated steel cable
Permanently lubricated
Tool clip included
External tension adjustment
Ratchet cable lock
LINE REEL BALANCERS
LR-Series
Designed for use with small pneumatic tools for light duty
applications
Integrating air hose and support cable keep work areas tidy
Adjustable ball stop for optional positioning
1/4" I.D. polyvinyl hose with 1/4" NPT inlet
Maximum 142 PSI
LR-09B-90/200
LR-09B-90 35.5 in 90 cm 3 lb 1.5 kg
LR-09B-200 78.3 in 199 cm 3 lb 1.5 kg
MODEL HOSE LENGTH CAPACITY
RPA-1 0.5 - 1.5 lb 0.2 - 0.7 kg
RPA-2 1.5 - 3.0 lb 0.7 - 1.4 kg
RPA-3 3.0 - 5.0 lb 1.4 - 2.3 kg
RMA-7L 5 - 10 lb* 2.3 - 4.8 kg*
RMA-15L 10 - 15 lb* 4.5 - 6.8 kg*
RMA-20L 15 - 23 lb* 6.8 - 10.4 kg*
* With ratchet lock
MODEL CAPACITY
BALANCER SELECTION
When choosing a balancer, a few important items should
be noted:
1. Determine if a retractor or a true balancer is required
2. Determine total cable travel needed and total weight
to be suspended, including all hose/cable, tool and
fixtures
3. To ensure maximum life span of your balancer,
selection should utilize weight range at the high end
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
LI NE REEL BALANCERS / RETRACTORS
AI MCO / 1 - 800- 852-1 368 1 00 AI MCO / 1 - 800- 852-1 368
AIR CYLINDER SERIES
AD-D1098-SAC Single Air manifold 4 - 33 102 - 838 0 - 15 0 - 7 110 12
AD-D1098-PAC Parallel Air manifold 4 - 33 102 - 838 0 - 15 0 - 7 110 12
AD-D1098-PACE Parallel Electric 4 - 33 102 - 838 0 - 15 0 - 7 110 12
OIL CYLINDER SERIES
AD-D1098-S Single Air manifold** 4 - 33 102 - 838 0 - 15 0 - 7 110 12
AD-D1098-P Parallel Air manifold 4 - 33 102 - 838 0 - 15 0 - 7 110 12
*Max torque allowed may be dependent on tool clutch type and joint rate
**For single arm electric tool mount, order EAP-202ED-KIT
FEATURES:
Ergonomic Support for Electric and Pneumatic Tools
Reduces Operator Fatigue
Increases Productivity, Consistency, and Accuracy
Dual ball bearing joint
construction for smoother
movement and long life
Air regulator offers precision
adjustment of resistance for perfect
balance
Unique upper rail
adjustment allows true
vertical approach to any
fastener no crossthreading
AD-D1098-PAC
SPECIAL FEATURES
OF CLASSIC STYLE ERGO-ARM
MODEL ARM STYLE TOOL MOUNT REACH CAPACITY MAXIMUM TORQUE*
IN MM LB KG IN-LB NM
AD-D1098-SAC
SINGLE ARM SERIES
AD-D1098-S, AD-D1098-SAC
Full tool rotation
Operator control
Adjustable reach
Compatible with automatic screw feeder
Available in air or oil cylinder models
PARALLEL ARM SERIES
AD-D1098-P, AD-D1098-PAC, AD-D1098-PACE
Minimizes operator control
Vertical adjustment eliminates cross-threading
Fixtured tool increases repeatability
Adjustable reach
Available in air or oil cylinder models
Electric tool mount standard on PACE model
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
ERGO- ARM

AI MCO / 1 - 800- 852-1 368 1 01 AI MCO / 1 - 800- 852-1 368
ERGO-ARM ACCESSORIES
End-of-Arm Tooling options for
the Ergo-Arm
allow you to
choose the style your application
requires
The tool holders permit the tool
to swivel, rotate, swing or twist.
Their heavy duty construction
can lock out any single or
combination of rotating actions
allowing only the motions
required by your application
In addition, End-of-Arm Tooling
Brackets are simple to use, so one
Ergo-Arm
can be used for more

than one application
FOR USE WITH MODELS AD-D1098-S/SAC
EAA-21 - Pistol Grip Tool Mount Kit EAA-21 - Right Angle Tool Mount
EAA-04 - Provides easy
conversion of the standard
Ergo-Arms to the parallel style.
EAP-202ASSY - Driver Tool Mount
FOR USE WITH MODELS AD-D1098-P/PAC PARALLEL ARM KIT
EAP-203-ASSY - Air Manifold Tool
Mount Kit (Standard on parallel
units)
MODEL DESCRIPTION MAX. REACH WEIGHT CAPACITY MAX. TORQUE HEIGHT
IN CM LB KG FT-LB NM IN CM IN CM
LQ-0002 Linear Arm 14 37 1- 5 0.5 - 2.3 20 27 24 61 1.6 4.1
LQ-0004 Linear Arm 23 58 3 - 10 1.4 - 4.5 25 34 36 91.4 1.6 4.1
LQ-0024H Heavy Duty Arm 23 58 3 - 10 1.4 - 4.5 75 102 36 91.4 1.6 4.1
LQ-0002 Linear Arm
shipped with two ASB-0C balancers
LQ-0004 Linear Arm
shipped with two TW-3 balancers
LQ-0024H Heavy Duty Arm
shipped with two TW-3 balancers
STANDARD TOOL MOUNT
DIAMETER
LINEAR ARM
Smooth movement and perfect
balance while limiting operator
control
Machined stainless steel and ball
bearing construction
Two high-quality tool balancers
included with each arm provide
a wide range of adjustment
EAP-202ED-KIT - Electric Driver
Tool Mount Kit
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
ERGO- ARM
ACCESSORI ES AND LI NEAR ARM

CUSTOM REACTION
DEVICES
Torque Tubes with up to
300 ft-lb capacity
Torque Arms with up to
3000 ft-lb capacity
Floor, table, wall and overhead
mounting available
Multiple pivot-points allow reach
up to 15 feet
Contact your AIMCO sales representative in order to determine the
exact torque reaction system needed to improve the productivity
and ergonomics of your assembly station!
AI MCO / 1 - 800- 852-1 368 1 02 AI MCO / 1 - 800- 852-1 368
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
3 FT. SWINGING JIB (AW3S)
3 FT FIXED JIB (AW3F)
3 FT. SWINGING JIB FOR CHANNEL MOUNT
(AJS3**)
Jibs are mounted to wall or beams to create
free standing workstations. End stop, end cap
and balancer trolley included. Maximum
weight: 30 lb.
6 FT. SWINGING JIB (AW6S)
6 FT FIXED JIB (AW6F)
Jibs can be wall mounted or attached to
vertical column (AVC-5) to create a
freestanding workstation. End stop, end caps
and balancer trolley are included. Maximum
weight: 50 lbs.
All complete assemblies are beige polyester
finish and include balancer trolley, end caps
and end stops. Floor mounted assemblies are
not able to ship via UPS.
**
Additional freight may apply
**
AJS3 Does not include balancer trolley
90 CONNECTOR FOR
3/8" HOSE (WSCH)
3/8" I.D. Brass. Use to provide stable
transfer point from air
line to tool. 90 degree connector
attaches to ABT-5.
BALANCER TROLLEY (ABT-3/5)
Black polyester finish.
Use as moving support
for tool balancers, hose and
cable. Quality ball bearing
wheels for long life and
smooth tracking.
ABT-3 for 30 lb track (1.00 dia)
ABT-5 for 50 lb track (1.25 dia)
HANGER BRACKET
(AHB-3/5)
Use to suspend track
at right angle.
AHB-3 for 30 lb. track
AHB-5 for 50 lb. track
VERTICAL COLUMN (AVC-5*)
Beige polyester finish, 3" diameter x 9 ft.
upright steel column with welded base.
Use as floor mount for extra stability with
jibs or workstation components.
INTERMEDIATE CARRIER
Black polyester finish. Use for
moving cable or hose festoon.
Supports hose cable
OD .60-.94.
AIC3-2 for 30 lb. track
AIC5-2 for 50 lb. track
U-BOLTS (AUB-5)
Zinc plated steel. Use to secure
boom bracket or any flat metal
plate to AVC-5 (sold individually).
END CLAMP (AEC5-2)
Use as end stop with
hose carrier for festoon.
Cable/hose OD .60-.94.
SUPPORT CLAMPS (ASC-3/5)
Black polyester finish. Use as
additional support for track.
ASC-3 for 30 lb. track
ASC-5 for 50 lb. track
TOOL CLIP (SH-5)
Steel clip with safety latch. Use for tool
attachment and as replacement clip
for lightweight tool balancers.
Measures 2.37" long.
ROLLING HANGER (ABT5-R)
Black polyester finish. Use as
support for rolling track.Allows
X/Y axis movement, includes ball
bearing wheels.
TRACK NUT (ATN-3/5)
Zinc plated steel. Use to attach
accessories to track, as end stops,
or to isolate rolling accessories.
Fits both 50 lb. and 30 lb. track.
END STOP (AES-3/5)
Zinc oxide finish. Use to
prevent balancer trolley from
overtraveling the horizontal
track.
MOUNTING PLATE
(AMP-5)
Use as a base to mount
vertical uprights.
END CAP (AEP-3/5)
Black molded vinyl. Use to cap track
ends for a professional finish.
AEP-3 for 30 lb. track
AEP-5 for 50 lb. track
ANGLE BRACKET (AB-3/5)
Use to mount horizontal
track to vertical track.
Fits both 50 lb. and
30 lb. track.
JOINT HANGER
BRACKET (AJH-3/5)
Use to couple and hang
end-to-end track.
AJH - 3 for 30 lb. track
AJH - 5 for 50 lb. track
0.41 DIA. TYP
3.00
5.00
0.562
DIA.
6.00
5.00
4.00
3.50
AW3S
AJS3**
AW3F
1.26
1.18
0.47
1.575
1.575
0.55
2.25
6.00
(152)
6.00
(152)
3.00
2.50
0.41 DIA TYP
4.5
AW6F
AW6S
14 GA
11 GA
AJH-5 Shown
4.00
1.50
0.531 DIA. TYP
5
.5
1.0
COMPONENTS
WALL AND FLOOR MOUNTED JIBS
PART NUMBER 30# TRACK
AT3-3 3 ft track
AT3-4 4 ft track
AT3-6 6 ft track
AT3-9* 9 ft track
PART NUMBER 50# TRACK
AT5-3 3 ft track
AT5-4 4 ft track
AT5-6 6 ft track
AT5-9* 9 ft track
AT5-12* 12 ft track
TRACK
Steel with beige polyester finish. Use for vertical
and horizontal workstation support.
1
3
.0
When choosing a workstation system,

remember...
Total weight capacities should include tool
balancer, hose/cable and tool/fixture.
Units need to be supported vertically and
horizontally every 6 feet.
WORKSTATI ON COMPONENTS AND ASSEMBLI ES
AI MCO / 1 - 800- 852-1 368 1 03 AI MCO / 1 - 800- 852-1 368
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
BENCH MOUNTED SWINGING JIB (JJ30-S)
BENCH MOUNTED FIXED JIB (JJ30)
30 lb maximum weight
48" column height including mounting plate
3 ft. swinging jib includes balancer
trolley, end stop and cap
BENCH MOUNTED WORKSTATION
WITH TORQUE ARM (JJ30-TA**)
5 lb. maximum weight (RPA-3 included)
5' column height including
mounting plate
38" jib length (swinging)
15 ft-lb torque rating
3/8" NPT inlet
1/4" NPT outlet
Beige polyester finish
1/4" braided air hose
21" maximum
vertical arm travel
** Additional freight may apply
** For use with pneumatic tools only
AIMCO TOOL SUPPORT ARMS
FLOOR MOUNTED
3 FT. SWINGING JIB
(AW3FMS)
FLOOR MOUNTED
3 FT. FIXED JIB
(AW3FMF)
Maximum weight: 30 lb
Column height: 6 ft
FLOOR MOUNTED
6 FT. SWINGING JIB
(AW6FMS*)
FLOOR MOUNTED
6 FT. FIXED JIB
(AW6FMF*)
Maximum weight: 50 lb
Column height: 9 ft
Units include end stop,
balancer trolley and
intermediate carrier.
CREATE A CUSTOM SUPPORT SYSTEM
USING AIMCOS QUALITY PRODUCTS
Organize work areas to create a safe, productive working
environment.
Reduce risk of injury to worker by providing support for
heavy tools.
Protect valuable tools, fixtures, and monitoring devices
from damage by suspending them out of the way.
AIMCO BASIC WORKSTATION KIT (ATW-50)
50 lb maximum weight capacity
48" uprights
36" extensions
Table mounts included
6' tool rail with rolling trolley included
All necessary hardware included
TROLLEY MOUNTED TORQUE
ARM WITH 3-LB RETRACTOR
AND HOSE (FA-50-2*)
Ergonomic arm absorbs torque
reaction. Moves front to back
along overhead jib.
(TA-50-2)
Moves side
to side on
overhead track.
2
0
in
c
h
e
s
TOOL BASKET (21226)
Mounts easily to any work area
to hold pistol and angle style
tools.
AW6FMS*
AW6FMF*
AW3FMF
AW3FMS
WORKSTATI ON COMPONENTS AND ASSEMBLI ES
AIMCO can customize a workstation for you.
Contact your AIMCO sales representative.
AI MCO / 1 - 800- 852-1 368 1 04 AI MCO / 1 - 800- 852-1 368
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
AFRL-M24 Complete FRL 1/4" 19.4 150/120
AFRL-S24 Complete FRL 1/4" 19.4 235/120
AFRL-S34 Complete FRL 3/8" 24.0 235/120
AFRL-C34 Complete FRL 3/8" 30.0 235/150
AFRL-C44 Complete FRL 1/2" 67.1 235/150
AFRL-X64 Complete FRL 3/4" 124.0 235/150
AFRL-X84 Complete FRL 1" 177.0 235/150
AKL-M24 Compact FRL 1/4" 19.4 150/120
AKL-S24 Compact FRL 1/4" 19.4 235/120
AKL-S34 Compact FRL 3/8" 24.0 235/120
AKL-C34 Compact FRL 3/8" 30.0 235/150
AKL-C44 Compact FRL 1/2" 67.1 235/150
AK-M24 Filter/Regulator 1/4" 19.4 150/120
AK-S34 Filter/Regulator 3/8" 24.0 235/120
AK-C44 Filter/Regulator 1/2" 67.1 235/150
AK-X64 Filter/Regulator 3/4" 124.0 235/150
MODEL TYPE NPT AIR FLOW MAX PSI
PORT SIZE MAX CFM IN/OUT
Complete Filter, Regulator, Lubricator Units: Three-piece
modular units feature 30-micron filter with semi-auto
drain, regulator with gauge, and oil mist lubricator. All
units include mounting bracket and polycarbonate bowl
Complete Compact FRL Stack Units: Space saving units
include combination filter/regulator with gauge and
lubricator in a more compact size. Features 30-micron
filter with semi-auto drain. All units include mounting
bracket and polycarbonate bowl
Compact Filter/Regulator Stack Units: Combination units
for use when additional lubrication is not needed. Includes
30-micron filter, polycarbonate bowl, and semi-auto drain.
Order mounting bracket and gauge separately
To determine unit size for application,
you will need to know:
Total air flow (CFM) required for application
Size of incoming air line
Size of air line required by tool
Air supply pressure (PSI)
Allowable pressure drop
If the application requires lubrication
If the overall system has the required capacity
AIR PREPARATION UNITS:
BASIC FUNCTIONS
Stored compressed
air, oil-water emulsion
from condensate and
lubricating oil
Clean, regulated,
and lubricated
compressed air
for AIMCO tools
PRESSURE VESSEL
Clean, dry
compressed air,
regulated at
desired pressure
Contaminated
compressed air -
oil, water, solids
(scale, etc.)
Clean
compressed air
with pressure
fluctuations
AFE-M30 Filter Element M
AFE-S30 Filter Element S
AFE-C30 Filter Element C
AFE-X30 Filter Element X
ABG-2 Bowl Guard S
ABG-3 Bowl Guard C
ARG-1/2M Replacement Gauge, metal M, S
ARG-3 Gauge for Regulator, plastic C
ARG-4 Gauge for Regulator, plastic X
ARG-3/4M Replacement Gauge, metal C, X
AMB-1 Mounting Bracket M
AMB-2 Mounting Bracket S
AMB-3 Mounting Bracket C
AMB-4 Mounting Bracket X
The supply of clean, dry air is essential to the
operation of pneumatic powered tools. Use only
clean filtered air for longer tool life. Provide proper
airflow (CFM) and regulate air pressure (PSI) for
optimum performance.
MODEL SERIES
ACCESSORY
DESCRIPTION
AFRL-S24
AFRL-C34
AKL-S34
FILTER REGULATOR
LUBRICATOR
AI R PREPARATI ON UNI TS
AI MCO / 1 - 800- 852-1 368 1 05 AI MCO / 1 - 800- 852-1 368
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
MODEL CAPACITY
250-RZ 1/4" NPT Rigid Fitting
250-SZ 1/4" NPT Swivel Fitting
MODEL WORKING DESCRIPTION RETRACTED NPT
PRESSURE 100PSI (OD X ID X LENGTH) LENGTH FITTINGS
ASH-250C-10MSZ 3/8" x 1/4" x 10' 7" 1/4"
ASH-250C-15MSZ 3/8" x 1/4" x 15' 9 1/2" 1/4"
ASH-250C-25MSZ 3/8" x 1/4" x 25' 15 1/2" 1/4"
ASH-375C-15MSZ 9/16" x 3/8" x 15' 10" 3/8"
ASH-375C-25MSZ 9/16" x 3/8" x 25' 14" 3/8"
ASH-500C-15MSZ 3/4" x 1/2" x 15' 13" 1/2"
ASH-500C-25MSZ 3/4" x 1/2" x 25' 23" 1/2"
SINGLE AIR HOSE ASSEMBLIES (COILED)
MODEL DESCRIPTION
ASH-250Z 1/4" I.D.
ASH-375Z 3/8" I.D.
ASH-500Z 1/2" I.D.
RL
(Retracted Length)
16"
TAIL
ID
8"
TAIL
Assemblies include reusable swivel fitting
Burst pressure 428 PSI @ 68 F
Working temperature: -104 F to 175 F
Straight hose is available by the foot with or without
hose fittings
Ask about full reel pricing
Durable Polyurethane Hose
Excellent Recoil Memory
Maximum Flexibility and Lightweight
Transparent Hose Color (opaque available)
Custom Colors Available
High Chemical Resistance
SINGLE AIR HOSE (COILED)
CUSTOM LENGTHS
STRAI GHT AIR HOSE
(SOLD PER FOOT)
Custom length coil assemblies
and special colors are available
in minimum order quantities.
HELPFUL HINTS FOR AIR HOSE USE:
Use recommended ID air hose and fittings
Replace air hose regularly to help maintain clean air
Clear hose allows you to see water or dirt
accumulation in hose
Use correct length of hose to reduce air loss and
pressure drop
Use locking quick disconnect couplers for
additional safety
AIMCO AIR HOSE
Two rotation points prevent kinking of air hose
Design ensures full flow of air pressure
Rotating joint is supplied with polyurethane
dust cover
Heavy-duty construction for maximum life
O Ring
Shaft
Nipple
Ring Bush
X Ring
Adapter
Tube Band Dust Cover
Bush
ERGONOMIC TWIST PLUGS
These unique, ergonomically
designed hose fittings provide 360
rotation and 35 angled rotation in
any direction.
MODEL DESCRIPTION
B23 1/4" NPT F x 1/4" QC Brass Coupler
B23E 1/4" NPT F x 3/8" QC Brass Coupler
B25 3/8" NPT F x 3/8" QC Brass Coupler
QUICK COUPLERS
Manual ball couplers designed for use
with ergonomic twist plugs.
Brass with nitrile seals, rated to 300 PSI,
from -40 to +250 F.
AIR HOSE FITTINGS
MODEL DESCRIPTION
TS-20NP-3NPT 1/4" NPT Female x 3/8" NPT Male
TS-20US-2NPT 1/4" US Plug x 1/4" NPT Male
AI R LI NE
AI MCO / 1 - 800- 852-1 368 1 06 AI MCO / 1 - 800- 852-1 368
T
O
O
L

S
U
P
P
O
R
T

S
Y
S
T
E
M
S
I N- LI NE MI NI
LUBRI CATORS
These mist-type in-line
lubricators keep air operated
tools performing with greater
efficiency. The patented on
the tool mist lubricator
system also saves money.
MODEL CAPACITY
932-100-0 1/8" NPT
932-110-0A 1/4" NPT
SWI VEL AI R
FI TTI NGS GAUGES
For use with most portable air
tools, including screwdrivers,
drills, grinders, sanders, buffers,
staple guns and more. Rotates
360 for awkward angles.
MODEL DESCRIPTION WEIGHT LENGTH NPT TOOL CFM
7006 Mini Lube 2 1/2 oz 2 1/4" 1/4" 3 - 7
7007 Midget Lube 3 1/2 oz 2 1/2" 1/4" 7 - 15
7008 Master Lube 5 oz 3 1/4" 3/8" 15 - 30
I N- LI NE MI NI
REGULATORS
Easily adjust airflow with the
turn of a dial.
MODEL INLET WEIGHT MAX PSI TOOL CFM
7021 1/4" NPT 3 oz Up to 125 25
7021AG 1/4" NPT 3 oz Up to 125 25
7041A 3/8" NPT 11 oz Up to 125 50
7041AG 3/8" NPT 3 oz Up to 125 50
7051 1/2" NPT 7 oz Up to 125 60
FI TTI NGS AND
ADAPTERS
Brass pipe fittings for use as
medium and low pressure
connectors. Meets functional
requirements of SAE J530,
SAE J531, ASME and ASA.
Rated 1,000 PSI from -65 to +250 F.
MODEL DESCRIPTION
222P-6-4 3/8" NPT F x 1/4" NPT M Adapter
209P-6-4 1/4" NPT F x 3/8" NPT M Bushing
209P-8-6 3/8" NPT F x 1/2" NPT M Bushing
AI R LI NE ACCESSORI ES
MI NI AI R GUAGE
SWI VEL JOI NT KI TS
Bi-directional 360 rotation
Keeps air hose straight and
untwisted
Decreases operator fatigue
MODEL DESCRIPTION
7021AG 1/4" PT/NPT
7041AG 3/8" PT/NPT
FASTENER TOOLS
Ergo-Drive
Fastener Tools . . . . . . . . . . . . . . . . . . . . . 108-109

Standard Fastener Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . 110
AI MCO / 1 - 800- 852-1 368 1 07 AI MCO / 1 - 800- 852-1 368
F
A
S
T
E
N
E
R

T
O
O
L
S
FASTENER TOOLS
ERGO- DRI VE
FASTENER TOOLS
AI MCO / 1 - 800- 852-1 368 1 08 AI MCO / 1 - 800- 852-1 368
F
A
S
T
E
N
E
R

T
O
O
L
S
SLEEVE
RECESSED
SQUARE DRIVE
EXTENSION
ERGO-DRIVE
STANDARD
ERGO-DRIVE
VS. STANDARD
STANDARD EXTENSION ERGO-DRIVE
Ergo-Drive
sockets
Protect...
. . . YOUR I NVESTMENT!
Pulse tools are an investment and the anvil is the most expensive
single part of any pulse tool. ERGO-DRIVE
sockets mean less

vibration and wear on this critical component.
. . . YOUR WORKERS!
ERGO-DRIVE
sockets cause significantly less vibration during

fastening than conventional sockets. This allows your workers to do
their jobs without the worry of vibration-related injuries.
107
113
101
109
113
120
X Y
AXI S DI RECTI ON
Z
85
90
95
100
105
110
115
120
125
VIBRATION LEVEL
db(VL)
CONVENTI ONAL SOCKET ERGO- DRI VE SOCKET
. . . YOUR PRODUCTS!
By reducing run-out and vibration, ERGO-DRIVE
sockets allow the

most repeatable, accurate rundowns to take place, ensuring excellent
product quality.
% TORQUE LOSS USI NG ULT- 70 ( SET AT 45Nm)
7%
29%
3. 5%
18%
2%
12%
150 MM
ERGO DRIVE
STANDARD
100 MM
ERGO DRIVE
STANDARD
75 MM
ERGO DRIVE
STANDARD
EXTENSION
LENGTHS

O-RING retaining
insert maximizes
secure fit to your
pulse tool.
ULT-70
Cross Section
Cross Section
AI MCO / 1 - 800- 852-1 368 1 09 AI MCO / 1 - 800- 852-1 368
ERGO- DRI VE
FASTENER TOOLS
F
A
S
T
E
N
E
R

T
O
O
L
S
Sq.
L
D1 D2
A31/4EDS 1/4" 10 0.39 19 0.75 44 1.73
A31/2EDS 1/2" 20 0.77 22 0.87 44 1.73
A306EDS 6 mm 10 0.39 19 0.75 44 1.73
A308EDS 8 mm 14 0.55 20 0.79 42 1.65
A310EDS 10 mm 17 0.65 20 0.79 42 1.65
A312EDS 12 mm 20 0.79 20 0.79 42 1.65
A314EDS 14 mm 22 0.87 20 0.79 42 1.65
A316EDS 16 mm 25 0.98 20 0.79 45 1.77
A318EDS 18 mm 27 1.06 20 0.79 45 1.77
ERGO- DRI VE
SOCKETS
PART NO HEX D1 D1 D2 D2 L L
MM IN MM IN MM IN
3/8" Square Drive
A41/2EDS 1/2" 19 0.75 25 0.98 50 1.97
A413EDS 13 mm 22 0.85 25 0.98 52 2.05
A414EDS 14 mm 23 0.89 25 0.98 52 2.05
A415EDS 15 mm 24 0.93 25 0.98 52 2.05
A416EDS 16 mm 25 0.98 25 0.98 52 2.05
A417EDS 17 mm 28 1.10 28 1.10 54 2.13
A418EDS 18 mm 29 1.14 28 1.10 54 2.13
A419EDS 19 mm 30 1.18 28 1.10 54 2.13
1/2" Square Drive
A61-1/8EDS 1-1/8" 44 1.73 44 1.73 64 2.52
A61-1/4EDS 1-1/4" 49 1.91 44 1.73 66 2.60
A61-1/2EDS 1-1/2" 57 2.24 44 1.73 68 2.68
A618EDS 18 mm 31 1.22 44 1.73 60 2.36
A624EDS 24 mm 40 1.52 40 1.73 65 2.36
3/4" Square Drive
A815/16EDS 15/16" 38 1.50 54 2.13 69 2.72
A8100EDS 100 mm 136 5.35 76 2.99 120 4.72
1" Square Drive
H
(6PT)
H Sq.
L
D
A352EDE 3/8" 3/8" 52 2.05 20 0.79
A3100EDE 3/8" 3/8" 100 3.94 20 0.79
A375EDE 3/8" 3/8" 75 2.95 20 0.79
A3150EDE 3/8" 3/8" 150 5.91 20 0.79
A3190EDE 3/8" 3/8" 190 7.48 20 0.79
A3254EDE 3/8" 3/8" 254 10.00 20 0.79
A3300EDE 3/8" 3/8" 300 11.81 20 0.79
A3320EDE 3/8" 3/8" 320 12.60 20 0.79
3/8" Square Drive
ERGO- DRI VE
EXTENSI ONS
PART NO SQ DRIVE H L L D D
MM IN MM IN
A464EDE 1/2" 1/2" 64 2.52 28 1.10
A476EDE 1/2" 1/2" 76 2.99 28 1.10
A4125EDE 1/2" 1/2" 125 4.92 28 1.10
A4204EDE 1/2" 1/2" 204 8.03 28 1.10
A4254EDE 1/2" 1/2" 254 10.00 28 1.10
A4355EDE 1/2" 1/2" 355 13.98 28 1.10
1/2" Square Drive
A676EDE 3/4" 3/4" 76 2.99 40 1.58
A6100EDE 3/4" 3/4" 100 3.94 40 1.58
A6150EDE 3/4" 3/4" 150 5.91 40 1.58
A6200EDE 3/4" 3/4" 200 7.87 40 1.58
3/4" Square Drive
A8150EDE 1" 1" 150 5.91 54 2.13
A8200EDE 1" 1" 200 7.87 54 2.13
1" Square Drive
ADC-3SEDSQ 3/8" 1/4"
ADC-3SEDSQH7/16 3/8" 7/16"
3/8" Square Drive
QUI CK CHANGE CHUCKS
PART NO SQUARE HEX
DRIVE
ADC-4SEDSQ 1/2" 1/4"
ADC-4SEDSQH7/16 1/2" 7/16"
1/2" Square Drive
Sq. H
L
D
Additional sizes of Ergo-Drive
sockets
and extensions are available upon request.
AI MCO / 1 - 800- 852-1 368 1 1 0 AI MCO / 1 - 800- 852-1 368
STANDARD FASTENER TOOLS
F
A
S
T
E
N
E
R

T
O
O
L
S
L
12
STANDARD FASTENER TOOLS
Connect your tool to the application with Bits, Sockets
and Nutsetters from AIMCO.
AIMCO has assembled the most complete package of
commonly used screwdriver bits and nutsetters in the
industry. Our goal is to supply you with the highest quality
bits and nutsetters for all your fastener needs.
If youre in electronics, aerospace, automotive or
general industry, AIMCO has the bits and nutsetters
to t your needs.
OD
ID
L
AM1/4Z 7 mm 19 mm 10 mm
AM5Z 6 mm 17.5 mm 10 mm
AM3/16Z 3/16" 17.5 mm 10 mm
Mag-O-Nets
PART NO. INNER OUTER L

ID ID mm
A3W2-3 2 75 2.94
A3W2-4 2 100 3.94
A3W2-8 2 200 7.78
A3W3-4 3 100 3.94
Phillips Power Bits (Double-Ended)
PART NO. POINT SIZE L L
mm in
Additional types and sizes of fastener tools
are available upon request.
ADC-3S 3/8" 1/4" 20 0.79 42 1.65
Quick Change Chucks
PART NO. SQUARE HEX D1 D1 L L
DRIVE mm in mm in
H Sq.
A35/8 5/8" 23 0.91 22 0.87 34 1.34
A310 10 mm 17 0.65 20 0.79 32 1.26
A312 12 mm 20 0.79 20 0.79 32 1.26
A315 15 mm 23 0.91 20 0.79 32 1.26
A317 17 mm 26 1.02 20 0.79 35 1.38
Impact Sockets (3/8" Square Drive)
PART NO. HEX D1 D1 D2 D2 L L
mm in mm in mm in
Sq.
L
D1 D2
H
(6PT)
A3BMP1/4-2 1/4" 50 1.97
A3BMP5/16-2 5/16" 50 1.97
A3BMP3/8-2 3/8" 50 1.97
A3BMP10-4 10 mm 100 3.94
A3BMP12-4 12 mm 100 3.94
Magnetic Nutsetters (MP Type)
PART NO. HEX L L
mm in
A345TT 45TT 7.8 20 0.79 70 2.76
A350TT 50TT 8.8 20 0.79 70 2.76
Torx Sockets (Torx T-Type, 3/8" Square Drive)
PART NO. TORX A D D L L
SIZE mm mm in mm in
AI MCO / 1 - 800- 852-1 368 1 1 1 AI MCO / 1 - 800- 852-1 368
BUILDING AN ASSEMBLY SOLUTION
SELECT THE RIGHT TOOL FOR THE APPLICATION AND ADD THE APPROPRIATE ACCESSORIES TO MAXIMIZE PROFIT POTENTIAL WITH
P.E.R.Q.
Productivity: the speed and efficiency of the assembly process

Ergonomics: the relationship between the worker and the
assembly process
Reliability: the total cost of tool maintenance and repair
Quality: the ability of the tool to adhere to process
requirements
Customers
Assembly
Application
Pneumatic
Tools
Electric
Tools
Cordless
Tools
Assembly
Systems
Tool Support
Systems
Fastener Tools
Torque Measurement
Systems
pg. 105
pg. 98
pg. 102
pg. 104
pg. 105
pg. 100
DC Controlled
Tools
NOTES
AI MCO / 1 - 800- 852-1 368 1 1 2 AI MCO / 1 - 800- 852-1 368
AI MCO / 1 - 800- 852-1 368 1 1 3 AI MCO / 1 - 800- 852-1 368
NOTES
AI MCO / 1 - 800- 852-1 368 1 1 4 AI MCO / 1 - 800- 852-1 368
NOTES
www.aimco-global.com (800) 852-1368
Please contact your AIMCO representative for complete product
information on any product not detailed in this catalog.
Unit to be
Nm kgf-cm kgf-m in-lb ft-lb
Converted
1 Nm 10.19 0.1019 8.852 0.7375
1 kgf-cm 0.098 0.01 0.868 0.072
1 kgf-m 9.8066 100 86.8 7.233
1 in-lb 0.113 1.152 0.0115 0.083
1 ft-lb 1.355 13.83 0.138 12
TORQUE CONVERSION TABLE
A-50 Series . . . . . . . . . . .95
AD-D Series . . . . . . . . . .100
AE-2015 . . . . . . . . . . . . .34
AE-2020B . . . . . . . . . . . .33
AE-2045DPS . . . . . . . . . .35
AE-24PS . . . . . . . . . . . . .35
AE-4020 . . . . . . . . . . . . .33
AE-4520 . . . . . . . . . . . . .33
AE-5681 . . . . . . . . . . . . .33
AE-5681ESD . . . . . . . . . .34
AE-6300 . . . . . . . . . . . . .35
AE-6300M . . . . . . . . . . . .35
AE-6300S . . . . . . . . . . . .35
AE-6450 . . . . . . . . . . . . .35
AE-6450S . . . . . . . . . . . .35
AE-7010 . . . . . . . . . . . . .33
AE-7080PS . . . . . . . . . . .36
AE-78PS . . . . . . . . . . . . .36
AE-8010 . . . . . . . . . . . . .33
AE-8681 . . . . . . . . . . . . .33
AEC- CIM . . . . . . . . . . . .66
AEN Series . . . . . . . . . . . .61
AEP Series . . . . . . . . . . . .63
AES Series . . . . . . . . . . . .62
AET Series . . . . . . . . . . . .64
AFRL Series . . . . . . . . . .104
AJT Series . . . . . . . . . . . .90
AK Series . . . . . . . . . . . .104
AKL Series . . . . . . . . . . .104
ALPHA-101MC . . . . . . . . .73
ALPHA-110MC . . . . . . . . .73
ALPHA-130 . . . . . . . . . . .17
ALPHA-130MC . . . . . . . . .73
ALPHA-140 . . . . . . . . . . .18
ALPHA-140MC . . . . . . . . .73
ALPHA-160 . . . . . . . . . . .18
ALPHA-180 . . . . . . . . . . .18
ALPHA-50DMC . . . . . . . . .73
ALPHA-50MC . . . . . . . . . .73
ALPHA-60DMC . . . . . . . . .73
ALPHA-60MC . . . . . . . . . .73
ALPHA-60SD . . . . . . . . . .19
ALPHA-60SDMC . . . . . . . .73
ALPHA-60SMC . . . . . . . . .73
ALPHA-70MC . . . . . . . . . .73
ALPHA-80MC . . . . . . . . . .73
ALPHA-90MC . . . . . . . . . .73
APM-30 . . . . . . . . . . . . . .35
APS-35W . . . . . . . . . . . . .35
ARTIS Series . . . . . . . . . . .88
ARTU Series . . . . . . . . . . .88
ASB Series . . . . . . . . . . . .98
ASH Series . . . . . . . . . . .105
ASTIS Series . . . . . . . . . . .89
ASTU Series . . . . . . . . . . .89
ATC Series . . . . . . . . . . . .83
ATDA . . . . . . . . . . . . . . . .85
ATDC . . . . . . . . . . . . . . . .85
ATM-1-1 . . . . . . . . . . . . . .78
ATST Series . . . . . . . . . . .86
ATW Series . . . . . . . . . . .103
AUET Series . . . . . . . . . . .84
BRH Series . . . . . . . . . . . .51
CB-13P . . . . . . . . . . . . . .51
iEC Series . . . . . . . . . . . .59
LQ Series . . . . . . . . . . . .101
LR Series . . . . . . . . . . . . .99
RH Series . . . . . . . . . . . . .51
RMA Series . . . . . . . . . . .99
RPA Series . . . . . . . . . . .99
SBH Series . . . . . . . . . . .51
SPC-12 Series . . . . . . . . .46
SPC-96 Series . . . . . . . . .46
SPC-A Series . . . . . . . . . .45
SPC-A-16-843-1A . . . . . . .48
SPC-A-16TC-843-1A . . . . .48
SPC-A-HL . . . . . . . . . . . . .47
SPC-C-110 . . . . . . . . . . . .46
SPC-C-220 . . . . . . . . . . . .46
SPC-CR . . . . . . . . . . . . . .47
SPC-P Series . . . . . . . . . .44
SPC-P-843-1A . . . . . . . . .48
SPC-P-HL . . . . . . . . . . . . .47
SPC-QC . . . . . . . . . . . . . .47
TS Series . . . . . . . . . . .105
TW Series . . . . . . . . . . . .98
U-100EC . . . . . . . . . . . . .74
U-310SD . . . . . . . . . . . . .19
U-350D . . . . . . . . . . . . . .16
U-350SD . . . . . . . . . . . . .19
U-410 . . . . . . . . . . . . . . .17
U-410S . . . . . . . . . . . . . .20
U-410SD . . . . . . . . . . . . .19
U-50DEC . . . . . . . . . . . . .74
U-50EC . . . . . . . . . . . . . .74
U-50SDEC . . . . . . . . . . . .74
U-50SEC . . . . . . . . . . . . .74
U-60DEC . . . . . . . . . . . . .74
U-60EC . . . . . . . . . . . . . .74
U-60SEC . . . . . . . . . . . . .74
UAG-Series . . . . . . . . . . . .52
UAN-611R Series . . . . . . .38
UAN-611RM Series . . . . .75
UAN-701R Series . . . . . . .38
UAN-701RM Series . . . . .75
UBP Series . . . . . . . . . . . .42
UD Series . . . . . . . . . . . . .50
UEC-4500 . . . . . . . . . . . .77
UEC-4800 . . . . . . . . . . . .76
UEP Series . . . . . . . . . . . .72
UFT Series . . . . . . . . . . . .91
UG Series . . . . . . . . . . . .52
UL Series . . . . . . . . . . . . .11
UL-MC Series . . . . . . . . . .71
ULT Series . . . . . . .10,12-13
UNR Series . . . . . . . . . . .69
UOW Series . . . . . . . . . . .39
UOW-M Series . . . . . . . . .75
UP-25DB . . . . . . . . . . . . .52
URW Series . . . . . . . . . . .40
US-3.5ACB . . . . . . . . . . . .29
US-3.5B . . . . . . . . . . . . . .30
US-3.5Pb . . . . . . . . . . . .30
US-350PW . . . . . . . . . . . .31
US-450WB . . . . . . . . . . . .31
US-5 . . . . . . . . . . . . . . . .30
US-50 . . . . . . . . . . . . . . .30
US-652PW . . . . . . . . . . . .31
US-LD40P Series . . . . . . .29
US-LD50P Series . . . . . . .29
US-LT10B . . . . . . . . . . . . .25
US-LT20B Series . . . . . . .25
US-LT30B Series . . . . . . .25
US-LT30B-11C . . . . . . . . .26
US-LT30B-17C . . . . . . . . .26
US-LT30BL Series . . . . . .26
US-LT31PB Series . . . . . .27
US-LT40-03C . . . . . . . . . .26
US-LT40-05C . . . . . . . . . .26
US-LT40-08C . . . . . . . . . .26
US-LT40-15C . . . . . . . . . .26
US-LT40B Series . . . . . . .26
US-LT40B-05C . . . . . . . . .26
US-LT40B-08C . . . . . . . . .26
US-LT40B-15C . . . . . . . . .26
US-LT40BL Series . . . . . .26
US-LT41PB Series . . . . . . .27
US-LT50B Series . . . . . . . .25
US-LT51PB Series . . . . . . .27
US-LT60P Series . . . . . . .27
UT-66B-07 . . . . . . . . . . . .50
UTM-1500 . . . . . . . . . . . .78
UW Series . . . . . . . . . . . .49
UX Series . . . . . . . . . . . . .17
UX-612A . . . . . . . . . . . . .21
UX C Series . . . . . . . . . . .21
UX D Series . . . . . . . . . . .16
UX EC Series . . . . . . . . . .74
UX S Series . . . . . . . . . . .20
UX SD Series . . . . . . . . . .19
UX-ST Series . . . . . . . . . .22
UX-T Series . . . . . . . . . . .15
UXR-1820 . . . . . . . . . . . .18
UXR-2000 . . . . . . . . . . . .18
UXR-2000S . . . . . . . . . . .18
UXR-2400S . . . . . . . . . . .18
UXR-3000S . . . . . . . . . . .18
UXR MC Series . . . . . . . . .73
UXR-T Series . . . . . . . . . .15
INDEX
POWER TOOLS
DC CONTROLLED FASTENI NG TOOLS
TORQUE MEASUREMENT SYSTEMS
ASSEMBLY SYSTEMS
FASTENER TOOLS
CORPORATE HEA D QUA RTE RS
10000 S.E. Pine St.
Portland, OR 97216
(800) 852-1368
FAX (800) 582-9015
1204 E. Maple Rd.
Troy, MI 48083
(800) 852-1368
FAX (800) 582-9015
Ave. Morones Prieto 2110 Pte.
Col. Loma Larga
Monterrey, NL CP 64710, Mexico
52-81 1001-1600
FAX 52-81 1001-1630
LIT-AT100
PRINTED-10K-10/08-CTPT-USA
Printed in USA
2008 AIMCO

Catalogo Aimco Viejo

Uploaded by

Copyright:

Available Formats

Catalogo Aimco Viejo

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Aimco Viejo

Uploaded by

Copyright:

Available Formats

ASSEMBLY TOOL

DC Continuous Drive Tools and Controller . . . . . . 57

Fastener Tools . . . . . . . . . . . . . . . . . . . . . 108-109

is the industry-standard formula that matches the

formula to determine that

with AIMCOs vast experience and

elements acts as a gear each

Pulse Tools . . . . . . . . . . . . . . . . . . . . . . . . . 14-21

elements productivity, ergonomics,

SERIES EXTENSION BARS

sockets mean less

sockets cause significantly less vibration during

sockets allow the

DC CONTI NUOUS DRI VE TOOLS

Angle Nutrunners ...........................................................61

Inline Nutrunners ...........................................................62

Pistol Nutrunners ...........................................................63

Tubenut Nutrunners .........................................................64

PNEUMATI C CONTROLLED PULSE TOOLS

I NTELLI GENT CONTROLLER

Excel or other programs.

Enable/Disable tool through bar code

was established in Portland, Oregon in the

has evolved into a leading manufacturer

I NTELLI GENT CONTROLLER

I NTELLI GENT CONTROLLER

tools and controllers. Provided at no

computer workstation. The software automatically detects the controller

angle nutrunners provide a solution to

angle nutrunners offer

inline nutrunners are the perfect

PI STOL GRI P NUTRUNNERS

tool spindle into a

blanks may be easily

controllers via 20403

2000 or 3000 series

Pneumatic Pulse Tools

SERIES UET TORQUE TESTERS

TORQUE DATA ANALYZER

TORQUE DATA COLLECTOR

torque cart offers the perfect solution to on-line

torque cart is a compact, easy-to-use,

screw presenters provide:

Productivity: the speed and efficiency of the assembly process

Tool Support Systems . . . . . . . . . . . . . . . . . . . . 100

TOOL SUPPORT SYSTEMS

can be used for more

ACCESSORI ES AND LI NEAR ARM

When choosing a workstation system,

Fastener Tools . . . . . . . . . . . . . . . . . . . . . 108-109

sockets mean less

sockets cause significantly less vibration during

sockets allow the

PART NO. INNER OUTER L

Productivity: the speed and efficiency of the assembly process

You might also like