Scribd
Upload
366 views1 page

4 Channel HD Video Encoder RF Modulator, 4 Video Inputs, 1-4 Channel Output, With IP Video Ouput and ASI Output, Support AC3 Audio

Thor broadcast 4 CH YPbPR HD MPEG2 or H.264 encoder + RF Modulator with QAM or ATSC RF output and IP Ethernet output, 4 HD Video incites - 1-4 CATV channel output It has also IP and DVB-ASI output, Excellent for private cable channel creation form the video of your choice, for hotels, schools, motels, universities https://thorbroadcast.com/products/hdmi

Uploaded by

thorbroadcast
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
366 views1 page

4 Channel HD Video Encoder RF Modulator, 4 Video Inputs, 1-4 Channel Output, With IP Video Ouput and ASI Output, Support AC3 Audio

Thor broadcast 4 CH YPbPR HD MPEG2 or H.264 encoder + RF Modulator with QAM or ATSC RF output and IP Ethernet output, 4 HD Video incites - 1-4 CATV channel output It has also IP and DVB-ASI output, Excellent for private cable channel creation form the video of your choice, for hotels, schools, motels, universities https://thorbroadcast.com/products/hdmi

Uploaded by

thorbroadcast
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Thors YPbPr all in one devices encoding and video distribution platform for broadcast and professional AV systems.

The system is based on a universal multiplex-


ing chassis with two input bays. Thor offers a variety of encoding cards for this platform including YPbPr, HDMI, dual HDMI, HD-SDI, as well as SD analog cards.
The entire system is managed through an integrated web server. All configuration settings and parameters can be controlled through the web interface or the front
panel LCD display. Parameters for each channel can be set independently; such as bit rate, encoding level, and PID mapping. After encoding, the chassis multiplexes
the signals from all inputs and distributes them in three useful formats. The QAM-IP platform outputs programming as a modulated RF television channel, an IPTV
multicast or unicast feed, and a DVB-ASI broadcast transport stream simultaneously. All three outputs are available continuously. The RF modulator can be set to
any frequency, and 8VSB is available in addition to QAM. The IPTV output is industry standard UDP and is easy to configure for use with media server software or
as a stand alone multicast program. DVB-ASI is a broadcast protocol used for transport or contribution of digital video. In addition to ASI output, the chassis also
has an ASI input that feeds into the units main multiplexer. This allows an externally created ASI signal to be added to the output programming. This broad feature
set allows a Thors YPbPr system to dramatically reduce rack space and total cost.
Key Features
* MPEG2 HD/SD & MPEG4 AVC H.264 HD/SD video encoding
* MPEG4-AAC; MPEG2-AAC; MPEG1 Layer audio encoding
* 2 YPbPr / CVBS channel in Single Card, 2 slots available
* Modular design, pluggable encoding modules
* 1*ASI in for re-mux; 1*RF in for RF mix
* Digital RF out (DVB-C/T/ATSC/ISDB-T RF Optional)
* ASI out; IP out
* VCT (Virtual Channel Table) supports ATSC modulating module
* Excellent modulation quality
* LCD display, Remote control and firmware
* Web-based NMS management; Updates via web
* LCN (Logical Channel Number) supports DVB-C/T/ISDB-T modulating module
* Lowest cost per channel
Video Encoding
Encoding: MPEG2; MPEG4 AVC/H.264
Interface: 2 YPbPr, 2 CVBS, 2 S-Video on single card
Resolution: 1920*1080_60P, 1920*1080_50P,
1920*1080_60I, 1920*1080_50I, 1280-720_60P, 1280*720_50P
Audio Encoding
Encoding: MPEG 1 Layer II, MPEG2-AAC; MPEG4-AAC ,
Audio Interface: Analog Left Right
Sample Rate: 480KHz
Bit Rate: 64/96/128/192/256/320/384kbps
Modulator Specifications : QAM or ATSC (8VSB) -by firmware
Standard: QAM , DVB-C , ATSC
Bandwidth: 6M, 7M, 8M
Constellation: QPSK, 16QAM, 64QAM
Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8
Guard Interval: 1/32, 1/16, 1/8, 1/4
Transmission Mode: 2K, 8K
MER: >42dB
RF Frequency: 30~960MHz, 1KHz step
RF Out: 1*or 2 QAM or ATSC carriers combined output (optional)
RF Output Level: -30~-10dbm (77~97 DVUV) 0.1db step
Modulator Specifications DVB-C
Standard: J.83A(DVB-C) J.83B, J.83C
MER: >43dB
RF Frequency: 30~960MHz, 1KHz step
RF Output Level: -30~-10dbm (77~97 DVUV) 0.1db step
Symbol Rate: 5.000~9.000Msps adjustable
RF Out: 1*QAM, ATSC or 2 *QAM, ATSC
Constellation: J.83A J.83B J.83C
16/32/64/128/256QAM 64/256QAM 64/256QAM
Bandwidth: 8M, 6M, 6M
ATSC
Standard: ATSC A/53
MER: >42db
Constellation: 8VSB
System
Local Interface: LCD + control buttons
Remote Management: Web NMS
Stream Out: 2 ASI out (BNC type); IP(MPTS/SPTS) out (RJ45, 100M)
NMS Interface: RJ45, 100M
Language: English
General
Power Supply: AC 100V~240V Dimensions: 482*300*44mm
Weight: 3.5kg Operation Temperature: 0~45 C
[email protected] Tel: 1 (800) 521-THOR
NEW!!!
2 YPbPr QAM IP
OR
4 YPbPr QAM IP
Models
H-2YPbPr-QAM-IP - 2 YPbPr / 2 CVBS /2 S-Video to QAM and IP
H-4YPbPr-QAM-IP - 4 YPbPr / 4 CVBS /4 S-Video to QAM and IP
H-2YPbPr-ATSC-IP - 2 YPbPr / 2 CVBS /2 S-Video to ATSC and IP
H-4YPbPr-ATSC-IP - 4 YPbPr / 4 CVBS /4 S-Video to ATSCand IP

You might also like