ER TFTV070 3 - Datasheet

TFT Display with Driver Board Datasheet ER-TFTV070-3
URL: www.buydisplay.com
buydisplay.com
EastRising

ER-TFTV070-3
TFT Display with Driver Board Datasheet

EastRising Technology Co., Limited

Attention:
A. Click CONTENTS list could be directed to the detail page. Click Return to CONTENTS could be directed to CONTNETS Page.
B. Some specifications of IC are not listed in this datasheet. Please refer to the IC datasheet for more details.
C. The related documents for interfacing, democode, ic datasheet are all available, please download from our web.
D. Please pay more attention to INSPECTION CRITERIA in this datasheet. We assume you already agree with these criterions when you place
an order with us. No more recommendations.

REV DESCRIPTION RELEASE DATE
1.0 Preliminary Release Dec-28-2013

Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 1 of 24


URL: www.buydisplay.com Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 2 of 24

buydisplay.com
EastRising

CONTENTS
1. ORDERING INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04
1.1 Order Number - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - 04
1.2 Accessory List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04
2. ATTRIBUTES - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05
2.1 Display Attribute - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05
2.2 Mechanical Attribute - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05
2.3 Electrical Attribute - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05
2.4 Optical Attribute- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05
3. OUTLINE DRAWING- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
3.1 TFT LCD Display Outline Drawing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
3.2 Main Board / Keyboard / Remote Control Outline Drawing - - - - - - - - - - - - - - - - - - - - - - - - - - - - 07
3.3 Power,Keyboard,Video (CVBS),VGA Cable with Terminal Outline Drawing - - - - - - - - - - - - - - - - 08
4. ELECTRICAL SPEC - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09
4.1.1 CN101 (TFT Display) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09
4.1.2 J 1 (Power) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
4.1.3 J 2 (Video or CVBS) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
4.1.4 J 3 (Keyboard) Pin Configuration- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
4.1.5 J 4 (VGA) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
4.1.6 Keyboard Desciption- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
4.1.7 Remote Control Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
4.2 Absolute Maximum Ratings for TFT Display- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
4.3 Electrical Characteristics for TFT Display- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
5. INSPECTION CRITERIA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
5.1 Acceptable Quality Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
5.2 Definition of Lot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
5.3 Condition of Cosmetic Inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
5.4 Module Cosmetic Criteria - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
5.5 Screen Cosmetic Criteria (Non-Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
5.6 Screen Cosmetic Criteria (Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18



buydisplay.com
EastRising
6. PRECAUTIONS FOR USING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
6.1 Handling Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
6.2 Power Supply Precautions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
6.3 Operating Precautions - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
6.4 Mechanical/Environmental Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
6.5 Storage Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
6.6 Others - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
7. USING LCD MODULES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
7.1 Liquid Crystal Display Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
7.2 Installing LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
7.3 Precaution for Handling LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
7.4 Electro-Static Discharge Control- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
7.5 Precaution for Soldering to EastRising LCM- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
7.6 Precaution for Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
7.7 Limited Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
7.8 Return Policy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24


URL:

www.buydisplay.com Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 4 of 24

buydisplay.com
EastRising
1. ORDERING INFORMATION
1.1 Order Number >>Return to CONTENTS
Part Number(Order Number) Description
ER-TFTV070-5 7 inch TFT-LCD Display with VGA+Video(CVBS)+HDMI Boardand
Keyboard Cable with Terminal (J 6)

1.2 Optional Accessory List >>Return to CONTENTS
Accessory Name Quantity Position
5 inch 4-wire Resistive Touch Panel 1 piece N/A
USB Port 4-Wire Touch Panel Driver Board 1 piece N/A
Video (CVBS) Cable with Terminal 1 piece J 5
Power Cable with Terminal 1 piece J 3
VGA Cable with Terminal 1 piece J 4
Remote Control (Optional) 1 piece N/A



buydisplay.com
EastRising
2. ATTRIBUTES
2.1 Display Attributes >>Return to CONTENTS
ITEM STANDARD VALUE UNIT
Display Format 800RGBx 480 Dots --
Display Connector FPC --
FPC Connector 50 Pin,0.5mm Pitch, SMD Horizontal Type Top Contact --
Operating Temperature -20 ~+70
Storage Temperature -30 ~+80
Touch Panel Optional Yes --
Sunlight Readable No --
Application Portable Product/Industrial Device/Hand-held/Security,
Instrument Display/Office Electronics
--

2.2 Mechanical Attributes >>Return to CONTENTS
Diagonal Size 7.0 inch
Outline Dimension for TFT Display 164.9(W) x100.0(H) mm
Active Area 154.08(W) x 85.92(H) mm
Pixel Size 0.0642(W) x 0.1790(H) mm
Gross Weight 411 g

2.3 Electrical Attributes >>Return to CONTENTS
IC Package COG --
Driver OTA7001A_V03 --
Interface
Video(CVBS)/VGA/HDMI
--
Response Time (Typ) 10 ms

2.4 Optical Attributes >>Return to CONTENTS
LCD Type TFT-LCD / Transmissive / Positive --
Viewing Angle Range Left:70, Right:70, Up:50, Down:70 deg
Colors 65K/262K/16.7M --
Contrast Ratio (Typ) 500:1 --
Brightness (Typ) 250 cd/m2



buydisplay.com
EastRising
3. OUTLINE DRAWING
3.1 TFT LCD Display Outline Drawing >>Return to CONTENTS

E
R
-
T
F
T
0
7
0
-
2
1

O
f

1
2
0
1
2
/
1
0
/
0
9
0
.
2
0
E
a
s
t
R
i
s
i
n
g

T
e
c
h
n
o
l
o
g
y

C
o
.
,
L
t
d
D
O

N
O
T

S
C
A
L
E

T
H
I
S

D
R
A
W
I
N
G
.
M
O
D
E

N
U
M
B
E
R

:
D
A
T
E
:
U
N
I
T
S
:

m
m
T
o
le
r
a
n
c
e
:
U
n
s
p
e
c
if
ie
d
J
I
M
D
E
S
I
G
N

B
Y
:
C
H
E
C
K
E
D

B
Y
:
A
P
P
R
O
V
E
D

B
Y
:
P
R
O
J
E
C
T
I
O
N
D
A
T
E
:
S
H
E
E
T
:

b
u
y
-
d
i
s
p
l
a
y
.
c
o
m
E
a
s
t
R
i
s
i
n
g


buydisplay.com
EastRising
3.2 Main Board / Keyboard / Remote Control Outline Drawing >>Return to CONTENTS

1
D
O

N
O
T

S
C
A
L
E

T
H
IS
D
R
A
W
IN
G
.
M
O
D
E
L

N
U
M
B
E
R

:
D
W
N
J
I
M
A
P
P
R
O
V
A
L
S
C
H
K
A
P
P
1
3
0
6
2
4
D
A
T
E
P
R
O
J
E
C
T
I
O
N
S
H
E
E
T
:
G
E
N
E
R
A
L
T
O
L
.
S
C
A
L
E
:
N
.
T
.
S
.
U
N
IT
S
M
M
T
E
L
:
8
6
-
7
5
5
-
3
3
5
0
3
8
7
1

3
3
5
0
3
8
7
3

F
A
X
:
8
6
-
7
5
5
-
3
3
5
0
7
6
4
2
-
8
0
1
E
A
S
T
R
I
S
I
N
G

T
E
C
H
N
O
L
O
G
Y

C
O
.
,
L
T
D
b
u
y
d
i
s
p
l
a
y
.
c
o
m
E
a
s
t
R
i
s
i
n
g
D
A
T
E
R
E
V
D
E
S
C
R
I
P
T
I
O
N
D
E
S
I
G
N
1
'
S
T

D
E
G
I
N
D
e
c
-
2
6
-
2
0
1
3
J
A
V
E
N
A
C
u
s
t
o
m
e
r

A
p
p
r
o
v
e
d

b
y
:
M
a
i
n

B
o
a
r
d

O
u
t
l
i
n
e

D
r
a
w
i
n
g
V
ID
E
O

S
E
L
E
C
T
M
E
N
U
M
O
D
E

S
E
L
E
C
T
3
9
,
7
0
85,80
6
,
5
0
R
e
m
o
t
e

C
o
n
t
r
o
l

O
u
t
l
i
n
e

D
r
a
w
i
n
g
L
C
D

R
E
M
O
T
E
E
R
-
D
B
T
-
5
0
P
-
1
J
1
1
1
0
K
e
y

B
o
a
r
d

O
u
t
l
i
n
e

D
r
a
w
i
n
g

(
J
6
)
S
1
S
2
S
3
S
4
S
5
P
C
B

7
6
,
0
0
0
.
3
11,300.3
6,000.3
PCB 16,000.3
5
4
,
3
0
0
.
3
PCB 1,600.1
6.00.3
5
,
9
0
0
.
3
1
5
,
1
5
0
0
.
3
2
3
,
7
2
5
0
.
3
3
6
,
3
2
5
0
.
3
5
2
,
0
2
5
0
.
3
6
9
,
9
0
0
0
.
3
6
0
,
6
5
0
0
.
3
7
,
5
5
0
.
5
11,500.3
17,250.3
7.501.0
MAX 2.0
4
,
3
0
0
.
3
4,300.3
T
u
rn
o
n
: Y
e
llo
w
G
re
e
n
O
N
/O
F
F
M
e
n
u
+
-
A
U
T
O
T
u
rn
o
ff : R
e
d
D
P
o
w
e
r

A
d
a
p
t
e
r
:

9

t
o
1
2
V

>
=
1
0
0
0
m
A

1
5
0
R
T
D
2
6
6
0
H

J
6
11 0
D
B
1
5
J
1
16
C
N
1

L
V
D
S
12
2
9
3
0
C
O
N
1
J
3
1 4
D C I N
J
4
J
5
1
5
R
C
A
1
H
D
M
I
1
1
2
R
1
,
6
5
0
.
2
12.50.3
R
3
,
1
5
0
.
1
5
R
1
,
0
0
0
.
1
1
5
,
0
0
0
,
3
8
,
8
0
0
,
3
6,000,3
12,000,3
3
0
,
8
0
0
,
3
R
4
,
1
5
0
,
2
1,600,1
MAX 2.0
65,600,3
9
0
,
6
0
0
,
3
4
-
R
1
,
5
0
0
.
1
7
7
,
2
5
0
,
2
1
1
,
0
0
0
,
3
59,800,2
2,300,3
60,300,2
1,600,3
8
,
5
0
0
,
3
2
1
,
5
0
0
,
3
2
7
,
3
0
0
,
3
2
2
,
8
0
0
,
3
3
,
1
0
1
0
,
5
0
0
,
3
1
,
8
5
0
,
3
3
4
,
7
5
0
,
3
1
5
0
C N 3
1
4
0
C N 2
1
4
0
C N 1
4
0
,
0
0
0
,
3
40,000,3
4,000,5
3,000,5
1,000,5
6,000,5
5
0

p
i
n

t
o

4
0

p
i
n

A
d
a
p
t
o
r

B
o
a
r
d
F
F
C
2
0
0
.
0
5
.
0
25,500.2
P0.5*49=24,500.1 0,500.1
W0,250.05
5
0
P
IN
I
N
P
U
T
4
0
P
I
N

T
T
L
O
N
P
U
T
4
0
P
IN
L
V
D
S

O
N
P
U
T



buydisplay.com
EastRising
3.3 Power,Keyboard,Video (CVBS),VGA Cable with Terminal Outline Drawing >>Return to n to CONTENTS CONTENTS

1
8
0
.
0
3
2
0
0
.
0
3
15,300.3 1
2
,
8
0
0
.
3
13,300.3
R3,15
0.15
R
1
,
0
0
0
.
1
1,500.2
5
1
4
.
0
5
5
6
0
.
0
5
0.900.1
2
7
8
.
0
3
2
9
2
.
0
3
8,500.3
1
2
6
.
0
3
1
6
5
.
0
3
24,500.3
32,000.3
3
,
4
0
0
.
2
3
,
9
0
0
.
2
4
,
5
0
0
.
2
P2,00
21,500.2
16.330.2
7
.
9
0
.
2
1
3
,
0
0
R
1
,
2
5
2,29
3
,
9
6
1
D
O
N
O
T
S
C
A
L
E
T
H
IS
D
R
A
W
IN
G
.
M
O
D
E
L

N
U
M
B
E
R

:
D
W
N
J
I
M
A
P
P
R
O
V
A
L
S
C
H
K
A
P
P
1
3
0
6
2
4
D
A
T
E
P
R
O
J
E
C
T
I
O
N
S
H
E
E
T
:
G
E
N
E
R
A
L
T
O
L
.
S
C
A
L
E
:
N
.
T
.
S
.
U
N
IT
S
M
M
T
E
L
:
8
6
-
7
5
5
-
3
3
5
0
3
8
7
1

3
3
5
0
3
8
7
3

F
A
X
:
8
6
-
7
5
5
-
3
3
5
0
7
6
4
2
-
8
0
1
E
A
S
T
R
I
S
I
N
G

T
E
C
H
N
O
L
O
G
Y

C
O
.
,
L
T
D
b
u
y
d
i
s
p
l
a
y
.
c
o
m
E
a
s
t
R
i
s
i
n
g
8,500.3
P
o
w
e
r

C
a
b
l
e

w
i
t
h

T
e
r
m
i
n
a
l

(
J
3
)
K
e
y

B
o
a
r
d

C
a
b
l
e

w
i
t
h

T
e
r
m
i
n
a
l

(
J
6
)
V
i
d
e
o

(
C
V
B
S
)

C
a
b
l
e

w
i
t
h

D
o
u
b
l
e

T
e
r
m
i
n
a
l
s

(
J
5
)
V
G
A

C
a
b
l
e

w
i
t
h

T
e
r
m
i
n
a
l

(
J
4
)
D
A
T
E
R
E
V
D
E
S
C
R
I
P
T
I
O
N
D
E
S
I
G
N
1
' S
T

D
E
G
I
N
D
e
c
-
2
6
-
2
0
1
3
J
A
V
E
N
A
E
R
-
D
B
T
-
5
0
P
-
1
20,500.3
20,500.3
R
1
,
6
5
0
.
2
R
4
,
1
5
0
.
2
R
1
,
6
5
0
.
2
R
4
,
1
5
0
.
2
R
5
,
5
0
0
,
2
R
5
,
5
0
0
,
2
11,300,2 11,300,2
3
9
,
5
0
0
,
3 6
,
5
0
8,30
3
4
,
5
0
0
,
3
13,500,3
3
7
5
.
0
3




buydisplay.com
EastRising
4. ELECTRICAL SPEC
4.1 Pin Configuration >>Return to CONTENTS
4.1.1 CON1 (TFT Display) Pin Configuration
Pin No Symbol Descriptions
1 VLED+ Power for LED backlight (Anode)
2 VLED+ Power for LED backlight (Anode)
3 VLED- Power for LED backlight (Cathode)
4 VLED- Power for LED backlight (Cathode)
5 GND Power ground
6 VCOM Common voltage
7 DVDD Power for Digital Circuit
8 MODE DE/SYNC mode select Note 1
9 DE Data Input Enable
10 VS Vertical Sync Input
11 HS Horizontal Sync Input
12 B7 Blue data(MSB)
13 B6 Blue data
14 B5 Blue data
15 B4 Blue data
16 B3 Blue data
17 B2 Blue data
18 B1 Blue data Note 2
19 B0 Blue data(LSB) Note 2
20 G7 Green data(MSB)
21 G6 Green data
22 G5 Green data
23 G4 Green data
24 G3 Green data
25 G2 Green data
26 G1 Green data Note 2
27 G0 Green data(LSB) Note 2
28 R7 Red data(MSB)
29 R6 Red data
30 R5 Red data
31 R4 Red data
32 R3 Red data
33 R2 Red data
34 R1 Red data Note 2


buydisplay.com
EastRising
35 R0 Red data(LSB) Note 2
36 GND Power Ground
37 DCLK Sample clock Note 3
38 GND Power Ground
39 L/R Left / right selection Note 4
40 U/D Up/down selection Note 4
41 VGH Gate ON Voltage
42 VGL Gate OFF Voltage
43 AVDD Power for Analog Circuit
44 RESET Global reset pin. Note 5
45 NC No connection
46 VCOM Common Voltage
47 DITHB Dithering function Note 6
48 GND Power Ground
49 NC No connection
50 NC No connection

4.1.2 J 1 (Power) Pin Configuration >>Return to CONTENTS
Pin No Symbol Description
1 +12V Power Supply (Suggested power adaptor should be 12V/1000mA in output, and
center pin for positive voltage and the outer shield for negative voltage)
2 +12V Power Supply (Suggested power adaptor should be 12V/1000mA in output, and
center pin for positive voltage and the outer shield for negative voltage)
3 GND Ground
4 GND Ground

4.1.3 J 5 (Video or CVBS) Pin Configuration >>Return to CONTENTS
1 ACC Voltage Input 12V for Reverse Sensor
2 Video-1 (CVBS-1) Video (CVBS) Signal Input 1
3 GND Ground
4 Video-2 (CVBS-2) Video (CVBS) Signal Input 2
5 GND Ground




buydisplay.com
EastRising
4.1.4 J 6 (Keyboard) Pin Configuration >>Return to CONTENTS
1 VCC Keyboard Power
2 GND Ground
3 IR Infrared Receiver
4 K1 Power on/off (ON/OFF)
5 K2 Menu (Menu)
6 K3 Volume Increase (+)
7 K4 Volume Decrease (-)
8 K5 AV / VGA Signal Select (AUTO)
9 LED-R LED Indicator Light in Red Color
10 LED-G LED Indicator Light in Green Color

4.1.5 J 4 (VGA) Pin Configuration >>Return to CONTENTS
1 GND Ground
2 V VGA Vertical Signal Input
3 H VGA Horizontal Signal Input
4 GND Ground
5 R-IN VGA Red Input
6 GND Ground
7 G-IN VGA Green Input
8 GND Ground
9 B-IN VGA Blue Input
10 GND Ground
11 SDA Used for Upgrade Software
12 SCL Used for Upgrade Software



buydisplay.com
EastRising
4.1.6 Keyboard Description >>Return to CONTENTS
<AUTO>: Press the <AUTO> key to switch the input signal between Video and VGA.
<MENU>: Menus definition under Video(CVAS) state
Brightness: Adjust the photo brightness.
Contrast: Adjust the photo contrast.
Hue: Adjust the photo hue.
Saturation: Adjust the photo Saturation.
Display Ratio: Select panel display ratio in16:9 or 4:3
Language: Select the language.
Sleep: Select the turn off times.
Reset: Restore the default settings.
Exit: Exit menu.

Menus definition under VGA state
Brightness: Adjust the photo brightness.
Contrast: Adjust the photo contrast.
Hue: Adjust the photo hue.
Saturation: Adjust the photo Saturation.
Display ratio: Select panel display ratio in 16:9 or 4:3
Language: Select the language.
Sleep: Select the turn off times.
Reset: Restore the default Settings.
Auto config: Auto adjust image.
Exit: Exit Menu.
<+>:Press <+> button to move the cursor from up to down on the OSD Menu,or reduce the parameters
value from small to large
<->:Press <-> button to move the cursor from down to up on the OSD Menu,or reduce the parameters
value from large to small.
<ON/OFF> :On means power on, Off means power off.
4.1.7 Remote Control Description >>Return to CONTENTS
The remote control includes five buttons, theyre Video Select (=<AUTO>),Menu,+,- and Power
(ON/OFF) The function is the same with Keyboard. Mode Select button is invalid.



buydisplay.com
EastRising
4.2 Absolute Maximum Ratings for TFT Display >>Return to CONTENTS
ITEM SYMBOL MIN. TYP. MAX. UNIT Remark
DVDD -0.3 - 5.0 V
AVDD 6.5 - 13.5 V
VGH -0.3 - 40.0 V
VGL -20.0 - 0.3 V
Power Supply Voltage
VGH-VGL - - 40.0
operating temperature Top -20 - +70 C
storage temperature TST -30 - +80 C

LED Reverse Voltage VR - - 1.2 V
LED Forward Current IF - - 25 mA Each LED Note 2
Humidity RH - 90%(Max60C) RH Each LED
Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module
be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in
an extreme case, the module may be permanently destroyed.
Note 2: VR Conditions: Zener Diode 20mA

4.3 Electrical Characteristics for TFT Display >>Return to CONTENTS
ITEM SYMBO
L
MIN. TYP. MAX. UNIT Remark
DVDD 3.0 3.3 3.6 V Note 2
AVDD 10.2 10.4 10.6 V
VGH 15.3 16.0 16.7 V
Power Supply Voltage
VGL -7.7 -7.0 -6.3 V
Input logic High voltage VIH 0.7DVDD - DVDD V
Input logic low voltage VIL 0 - 0.3VDD V

Note 3
Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH.
Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of customers system board.
Note 3: DCLK,HS,VS,RESET,U/D, L/R,DE,R0~R7,G0~G7,B0~B7,MODE,DITHB.



buydisplay.com
EastRising
5. INSPECTION CRITERIA
5.1 Acceptable Quality Level >>Return to CONTENTS
Each lot should satisfy the quality level defined as follows

PARTITION AQL DEFINITION
A. Major 0.4% Functional defective as product
B. Minor 1.5% Satisfy all functions as product but not satisfy cosmetic stanard

5.2 Definition of Lot
One lot means the delivery quantity to customer at one time.
5.3 Condition of Cosmetic Inspection >>Return to CONTENTS
INSPECTION AND TEST
-FUNCTION TEST
-APPEARANCE INSPECTION
-PACKING SPECIFICTION

INSPECTION CONDITION
- Put under the lamp (20w2) at a distance 100mm from
- Tilt upright 45 degree by the front (back) to inspect LCD appearance.
AQL INSPECTION LEVEL
- SAMPLING METHOD: MIL-STD-105D
- SAMPLING PLAN: SINGLE
- MAJ OR DEFECT: 0.65% (MAJ OR)
- MINOR DEFECT: 2.5% (MINOR)
- GENERAL LEVEL: II/NORMAL


buydisplay.com
EastRising
5.4 Module Cosmetic Criteria >>Return to CONTENTS
NO. Item Judgment Criterion Partition
1 Difference in Spec. None allowed Major
2 Pattern Peeling No substrate pattern peeling and floating Major
No soldering missing Major
No soldering bridge Major
3 Soldering defects
No cold soldering Minor
4 Resist flaw on substrate Invisible copper foil(0.5mm or more)on substrate pattern Minor
No soldering dust Minor 5 Accretion of metallic
Foreign matter No accretion of metallic foreign matters(Not exceed0.2mm)

6 Stain No stain to spoil cosmetic badly Minor
7 Plate discoloring No plate fading,rusting and discoloring Minor
8 Solder amount

1.Lead parts

a. Soldering side of PCB

Solder to form aFilet
all around the lead.
Solder should not hide the
lead form perfectly.(too much)
b.Components side
(In case of Through Hole PCB)

Solder to reach the Components side of PCB

Minor

2.Flat packages Either toe(A) or heal (B) of
the lead to be covered by Filet.

Lead form to be assume over
Solder.

Minor

3.Chips (3/2) Hh(1/2)H

Minor
A B
h
H



buydisplay.com
EastRising
9 Backlight defects 1.Light fails or flickers.(Major)
2. Color and luminance do not correspond to specifications.
(Major)
3.Exceeds standards for displays blemishes, foreign matter,
dark lines or scratches.(Minor)

See
list

10 PCB defects Oxidation or contamination on connectors.*
2. Wrong parts, missing parts, or parts not in specification.*
3.J umpers set incorrectly.(Minor)
4.Solder(if any)on bezel,LED pad,zebra pad,or screw hole
pad is not smooth.(Minor)
*Minor if display functions correctly.Major if the display fails.

See
list

11 Soldering defects

1. Unmelted solder paste.
2. Cold solder joints,missing solder connections,or oxidation.*
3. Solder bridges causing short circuits.*
4. Residue or solder balls.
5. Solder flux is black or brown.
*Minor if display functions correctly.Major if the display fails.
Minor



buydisplay.com
EastRising
5.5 Screen Cosmetic Criteria (Non-Operating) >>Return to CONTENTS
No. Defect Judgment Criterion Partition
1 Spots In accordance with Screen Cosmetic Criteria (Operating) No.1. Minor
2 Lines In accordance with Screen Cosmetic Criteria (Operation) No.2. Minor

Size: d mm Acceptable Qty in active area
d0.3
0.3<d1.0
1.0<d1.5
1.5<d
Disregard
3
1
0
Minor

3

Bubbles in
Polarizer

4

Scratch

In accordance with spots and lines operating cosmetic criteria, When the
light reflects on the panel surface, the scratches are not to be remarkable.
Minor

5 Allowable density Above defects should be separated more than 30mm each other. Minor
6

Coloration

Not to be noticeable coloration in the viewing area of the LCD panels.
Back-lit type should be judged with back-lit on state only.
Minor

7 Contamination Not to be noticeable. Minor


buydisplay.com
EastRising
5.6 Screen Cosmetic Criteria (Operating) >>Return to CONTENTS
A) Clear
Size:d mm Acceptable Qty in active area
d0.1
0.1<d0.2
0.2<d0.3
0.3<d
Disregard
6
2
0
Note: Including pin holes and defective dots which must be within one pixel
Size.
B) Unclear
Size:d mm Acceptable Qty in active area
1 Spots
d0.2
0.2<d0.5
0.5<d0.7
0.7<d
Disregard
6
2
0
Minor
2 Lines A) Clear

Note: () Acceptable Qty in active area
L - Length (mm)
W -Width(mm)
-Disregard
B) Unclear

Minor
Clear =The shade and size are not changed by Vo.
Unclear =The shade and size are changed by Vo.
L 5.0
2.0
8
0.02 0.05 0.1
W
See No.1
(0)
(6)
L 10.0
2.0
8
(6)
(0)
0.05 0.3 0.5
See No.1
W



buydisplay.com
EastRising
3 Rubbing line Not to be noticeable.

4 Allowable density Above defects should be separated more than 10mm each other. Minor
5 Rainbow Not to be noticeable. Minor
6 Dot size To be 95%~105%of the dot size (Typ.) in drawing.
Partial defects of each dot (ex.pin-hole) should be treated asspot.
(see Screen Cosmetic Criteria (Operating) No.1)
Minor
7 Brightness
(only back-lit
Module)

Brightness Uniformity must be BMAX/BMIN2
- BMAX :Max.value by measure in 5 points
- BMIN : Min.value by measure in 5 points
Divide active area into 4 vertically and horizontally.
Measure 5 points shown in the following figure.

Minor
8 Contrast
Uniformity
Contrast Uniformity must be BmAX/BMIN2
Measure 5 points shown in the following figure.
Dashed lines divide active area into 4 vertically and horizontally.
Measuring points are located at the inter-sections of dashed line.

Note: BMAX Max.value by measure in 5 points.
BMIN Min.value by measure in 5 points.
O Measuring points in 10mm.
Minor
Note:
(1) Size : d=(long length +short length)/2
(2) The limit samples for each item have priority.
(3) Complexed defects are defined item by item, but if the number of defects is defined in above table, the total
number should not exceed 10.



buydisplay.com
EastRising
(4) In case of concentration, even the spots or the lines of disregarded size should not be allowed. Following three
situations
Should be treated as concentration.
-7 or over defects in circle of 5mm.
-10 or over defects in circle of 10mm
-20 or over defects in circle of 20mm

6. PRECAUTIONS FOR USING EastRising EastRising EastRising EastRising EastRising
6.1 Handling Precautions >>Return to CONTENTS
This device is susceptible to Electro-Static Discharge (ESD) damage. Observe Anti-Static precautions.
EastRising display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact.
If EastRising display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in
your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.
Do not apply excessive force to the EastRising display surface or the adjoining areas since this may cause
the color tone to vary.
The polarizer covering the EastRising display surface of the LCD module is soft and easily scratched.
Handle this polarizer carefully.
If EastRising display surface becomes contaminated, breathe on the surface and gently wipe it with a soft
dry cloth. If it is heavily contaminated, moisten cloth with one of the following Isopropyl or alcohol.
Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the Water.
Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water
droplets, moisture condensation or a current flow in a high-humidity environment.
Install the EastRising LCD Module by using the mounting holes. When mounting the LCD module make
sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the cable or the
backlight cable.
Do not attempt to disassemble or process EastRising LCD module.
NC terminal should be open. Do not connect anything.
If the logic circuit power is off, do not apply the input signals.
To prevent destruction of the elements by static electricity, be careful to maintain an optimum work
environment.
-Be sure to ground the body when handling EastRising LCD modules.
-Tools required for assembling, such as soldering irons, must be properly grounded.
-To reduce the amount of static electricity generated, do not conduct assembling and other work under dry
conditions.
-The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this
protective film since static electricity may be generated.



buydisplay.com
EastRising

6.2 Power Supply Precautions >>Return to CONTENTS
Identify and, at all times, observe absolute maximum ratings for both logic and LC drivers. Note that there is
some variance between models.
Prevent the application of reverse polarity to VDD and VSS, however briefly.
Use a clean power source free from transients. Power-up conditions are occasionally jolting and may
exceed the maximum ratings of EastRising modules.
The VDD power of EastRising module should also supply the power to all devices that may access the
display. Dont allow the data bus to be driven when the logic supply to the module is turned off.
6.3 Operating Precautions >>Return to CONTENTS
DO NOT plug or unplug EastRising module when the system is powered up.
Minimize the cable length between EastRising module and host MPU.
For models with backlights, do not disable the backlight by interrupting the HV line. Unload inverters
produce voltage extremes that may arc within a cable or at the display.
Operate EastRising module within the limits of the modules temperature specifications.
6.4 Mechanical/Environmental Precautions >>Return to CONTENTS
Improper soldering is the major cause of module difficulty. Use of flux cleaner is not recommended
as they may seep under the electrometric connection and cause display failure.
Mount EastRising module so that it is free from torque and mechanical stress.
Surface of the LCD panel should not be touched or scratched. The display front surface is an easily
scratched, plastic polarizer. Avoid contact and clean only when necessary with soft, absorbent cotton
dampened with petroleum benzene.
Always employ anti-static procedure while handling EastRising module.
Prevent moisture build-up upon the module and observe the environmental constraints for storage tem
Do not store in direct sunlight
If leakage of the liquid crystal material should occur, avoid contact with this material, particularly ingestion.
If the body or clothing becomes contaminated by the liquid crystal material, wash thoroughly with water and
soap
6.5 Storage Precautions >>Return to CONTENTS
When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps.
Keep EastRising modules in bags (avoid high temperature / high humidity and low temperatures below 0C
Whenever possible, EastRising LCD modules should be stored in the same conditions in which they were
shipped from our company.
6.6 Others >>Return to CONTENTS
Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective
orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module



buydisplay.com
EastRising
is subject to a low temperature.
If EastRising LCD modules have been operating for a long time showing the same display patterns, the
display patterns may remain on the screen as ghost images and a slight contrast irregularity may also
appear. A normal operating status can be regained by suspending use for some time. It should be noted that
this phenomenon does not adversely affect performance reliability.
To minimize the performance degradation of the LCD modules resulting from destruction caused by static
electricity etc., exercise care to avoid holding the following sections when handling the modules.
-Exposed area of the printed circuit board.
-Terminal electrode sections.
7. USING LCD MODULES
7.1 Liquid Crystal Display Modules >>Return to CONTENTS
EastRising LCD is composed of glass and polarizer. Pay attention to the following items when handling.
Please keep the temperature within specified range for use and storage. Polarization degradation, bubble
generation or polarizer peel-off may occur with high temperature and high humidity.
Do not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass,
tweezers, etc.).
N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors
made of organic substances which will be damaged by chemicals such as acetone, toluene, ethanol and
isopropylalcohol.
When EastRising display surface becomes dusty, wipe gently with absorbent cotton or other soft material
like chamois soaked in petroleum benzin. Do not scrub hard to avoid damaging the display surface.
Wipe off saliva or water drops immediately, contact with water over a long period of time may cause
deformation or color fading.
Avoid contacting oil and fats.
Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers.
After products are tested at low temperature they must be warmed up in a container before coming is
contacting with room temperature air.
Do not put or attach anything on EastRising display area to avoid leaving marks on.
Do not touch the display with bare hands. This will stain the display area and degradate insulation
between terminals (some cosmetics are determinated to the polarizers).
As glass is fragile. It tends to become or chipped during handling especially on the edges. Please
avoid dropping or jarring.

7.2 Installing LCD Modules >>Return to CONTENTS
Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting
plate should have enough height to avoid causing stress to the module surface, refer to the individual
specifications for measurements. The measurement tolerance should be0.1mm.



buydisplay.com
EastRising
7.3 Precaution for Handling LCD Modules >>Return to CONTENTS
Since EastRising LCM has been assembled and adjusted with a high degree of precision; avoid applying
excessive shocks to the module or making any alterations or modifications to it.
Do not alter, modify or change the shape of the tab on the metal frame.
Do not make extra holes on the printed circuit board, modify its shape or change the positions of
components to be attached.
Do not damage or modify the pattern writing on the printed circuit board.
Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.
Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
Do not drop, bend or twist EastRising LCM.

7.4 Electro-Static Discharge Control >>Return to CONTENTS
Since this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as
for an ordinary CMOS IC.
Make certain that you are grounded when handing LCM.
Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body
have the same electric potential.
When soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak.
When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to
minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the
commutator of the motor.
As far as possible make the electric potential of your work clothes and that of the work bench the ground
potential.
To reduce the generation of static electricity be careful that the air in the work is not too dried. A relative
humidity of 50%-60% is recommended.

7.5 Precaution for Soldering to EastRising LCM >>Return to CONTENTS
Observe the following when soldering lead wire, connector cable and etc. to the LCM.
-Soldering iron temperature : 28010
-Soldering time: 3-4 sec.
-Solder: eutectic solder.
If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This
does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD
surface with a cover during soldering to prevent any damage due to flux spatters.
When soldering the electroluminescent panel and PC board, the panel and board should not be detached
more than three times. This maximum number is determined by the temperature and time conditions
mentioned above, though there may be some variance depending on the temperature of the soldering iron.
When remove the electroluminescent panel from the PC board, be sure the solder has completely melted,
the soldered pad on the PC board could be damaged.



buydisplay.com
EastRising
7.6 Precaution for Operation >>Return to CONTENTS
Viewing angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best
contrast.
Driving the EastRising LCD in the voltage above the limit shortens its life.
Response time is greatly delayed at temperature below the operating temperature range. However, this
does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature
range.
If EastRising display area is pushed hard during operation, the display will become abnormal. However, it
will return to normal if it is turned off and then back on.
Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore,
it must be used under the relative condition of 40, 50% RH.
When turning the power on, input each signal after the positive/negative voltage becomes stable.

7.7 Limited Warranty >>Return to CONTENTS
Unless agreed between EastRising and customer, EastRising will replace or repair any of its LCD modules
which are found to be functionally defective when inspected in accordance with EastRising LCD acceptance
standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual
defects must be returned to EastRising within 90 days of shipment. Confirmation of such date shall be based
on freight documents. The warranty liability of EastRising limited to repair and/or replacement on the terms set
forth above. EastRising will not be responsible for any subsequent or consequential events.
7.7 Return Policy >>Return to CONTENTS
No warranty can be granted if the precautions stated above have been disregarded. The typical
examples of violations are:
-Broken LCD glass.
-PCB eyelet damaged or modified.
-PCB conductors damaged.
-Circuit modified in any way, including addition of components.
-PCB tampered with by grinding, engraving or painting varnish.
-Soldering to or modifying the bezel in any manner.
Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with
sufficient description of the failures or defects. Any connectors or cable installed by the customer must be
removed completely without damaging the PCB eyelets, conductors and terminals
.

Thats the end of the Datasheet >>Return to CONTENTS

ER TFTV070 3 - Datasheet

Uploaded by

Copyright:

Available Formats

ER TFTV070 3 - Datasheet

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ER TFTV070 3 - Datasheet

Uploaded by

Copyright:

Available Formats

TFT Display with Driver Board Datasheet ER-TFTV070-3

You might also like