AISC Seismic Design-ModuleUG-Brief Overview

Design of Seismic Design of Seismic Design of Seismic Design of Seismic--
Resistant Steel Resistant Steel

Building Structures Building Structures
Brief Overview
Prepared by:
Michael D Engelhardt Michael D. Engelhardt
University of Texas at Austin
with the support of the
American Institute of Steel Construction American Institute of Steel Construction.
Version1- March2007
Design of Seismic Design of Seismic- -Resistant Steel Building Resistant Steel Building
Structures: A Brief Overview Structures: A Brief Overview
Earthquake Effects on Structures
Performance of Steel Buildings in Past Earthquakes g q
Importance of Ductility
Design Earthquake Forces: ASCE 7 Design Earthquake Forces: ASCE-7
Steel Seismic Load Resisting Systems
AISC Seismic Provisions
Performance of Steel Buildings in Past Earthquakes
Building Code Philosophy for Earthquake-Resistant Design
and Importance of Ductility
Design Earthquake Forces: ASCE-7
Steel Seismic Load Resisting Systems g y
Building
Acceleration
Building: g
Mass = m
Ground
Acceleration Acceleration
F = ma
Earthquake Forces
B ildi on Buildings:
Inertia Force Due to
Accelerating Mass Accelerating Mass
CollapseofRCBuildings
Landslides CollapseofRCBuildings
Landslides
p g
CollapseofTimber
Buildings
OtherCauses
Collapseof
MasonryBuildings
OtherCauses
Collapseof
MasonryBuildings
Fire
MasonryBuildings
CollapseofTimber
Buildings
MasonryBuildings
Fire
g
Earthquake Fatalities: 1900 1949 Earthquake Fatalities: 1950 1990 Earthquake Fatalities: 1900 - 1949
(795,000 Fatalities)
Earthquake Fatalities: 1950 - 1990
(583,000 Fatalities)
Causes of Earthquake Fatalities: 1900 to 1990 Causes of Earthquake Fatalities: 1900 to 1990
Conventional Building Code Philosophy for Conventional Building Code Philosophy for
E th k E th k R i t t D i R i t t D i Earthquake Earthquake--Resistant Design Resistant Design
Objective: Prevent collapse in the extreme
earthquake likely to occur at a
b ildi it building site.
Objectives are not to: Objectives are not to:
- limit damage
- maintain function - maintain function
- provide for easy repair
To Survive Strong Earthquake To Survive Strong Earthquake
without Collapse:
Design for Ductile Behavior Design for Ductile Behavior
H
H
Ductility = Inelastic Deformation
HH
H

yield

failure
Ductility Factor =

failure
yield
H
H
HH
elastic
3/4 *H
elastic
Strength
1/2 *H
l ti
Strength
Reqd Ductility
1/2 H
elastic
1/4 *H
elastic
MAX
Ductility in Steel Structures: Yielding
Nonductile Failure Modes: Fracture or Instability Nonductile Failure Modes: Fracture or Instability
H
Ductility = Yielding
Failure = Failure
Fracture
or
Instabilityy
Developing Ductile Behavior Developing Ductile Behavior:
Choose frame elements ("fuses") that will yield in an
th k earthquake.
Detail "fuses" to sustain large inelastic deformations prior to
the onset of fracture or instability (i.e. , detail fuses for
ductility).
Design all other frame elements to be stronger than the fuses,
i.e., design all other frame elements to develop the plastic i.e., design all other frame elements to develop the plastic
capacity of the fuses.
Key Elements of Seismic Key Elements of Seismic--Resistant Design Resistant Design
Required Lateral Strength
ASCE-7:
Mi i D i L d f B ildi d Oth Minimum Design Loads for Buildings and Other
Structures
Detailing for Ductility
AISC: AISC:
Seismic Provisions for Structural Steel Buildings
Design EQ Loads Total Lateral Force per ASCE 7-05:
s
V C W =
s
V C W
V=total design lateral
force or shear at
base of structure base of structure
W=effective seismic
weight of building weight of building
C
S
=seismic response
coefficient coefficient
V
Design EQ Loads Total Lateral Force per ASCE 7-05:
W C V = W C V
S
=
R
S
1 D
for T T
L

=
R
S
C
DS
S
I
R
T
for T T
L
I
R
S
I
R
T
T S
2
L 1 D
for T >T
L
S
DS
= design spectral
acceleration at
I =importance factor

I
short periods
S
D1
= design spectral
acceleration at
T = fundamental period of building
T
L
=long period transition period
acceleration at
1-second period
R =response modification coefficient
R factors for Selected Steel Systems (ASCE 7): R factors for Selected Steel Systems (ASCE 7):
SMF (Special Moment Resisting Frames): R = 8
IMF (I t di t M t R i ti F ) R 4 5 IMF (Intermediate Moment Resisting Frames): R = 4.5
OMF (Ordinary Moment Resisting Frames): R = 3.5
EBF (Eccentricall Braced Frames) R = 8 or 7 EBF (Eccentrically Braced Frames): R = 8 or 7
SCBF (Special Concentrically Braced Frames): R = 6
OCBF (Ordinary Concentrically Braced Frames): R = 3 25 OCBF (Ordinary Concentrically Braced Frames): R = 3.25
BRBF (Buckling Restrained Braced Frame): R = 8 or 7
SPSW (Special Plate Shear Walls): R = 7 SPSW (Special Plate Shear Walls): R = 7
Undetailed Steel Systems in Undetailed Steel Systems in
Seismic Design Categories A, B or C R = 3
(AISC Seismic Provisions not needed)
Seismic Load Resisting Systems Seismic Load Resisting Systems
for Steel Buildings for Steel Buildings gg
Moment Resisting Frames
Concentrically Braced Frames y
Eccentrically Braced Frames
Buckling Restrained Braced Frames Buckling Restrained Braced Frames
Special Plate Shear Walls
MOMENT RESISTING FRAME (MRF) MOMENT RESISTING FRAME (MRF)
Beams and columns with moment resisting connections; resist
lateral forces by flexure and shear in beams and columns -i.e. by
frame action. frame action.
Develop ductility primarily by flexural yielding
of the beams:
Advantages
Architectural Versatility
High Ductility and Safety
Disadvantages Disadvantages
LowElastic Stiffness
Moment Resisting Frame
Inelastic Response
of a Steel Moment
Resisting Frame
Concentrically Braced Frames (CBFs) Concentrically Braced Frames (CBFs)
Beams columns and braces arranged to forma vertical truss Beams, columns and braces arranged to forma vertical truss.
Resist lateral earthquake forces by truss action.
Develop ductility through inelastic action in braces.
braces yield in tension -braces yield in tension
-braces buckle in compression
Advantages
-high elastic stiffness
Disadvantages
-less ductile than other systems (SMFs EBFs BRBFs) -less ductile than other systems (SMFs, EBFs, BRBFs)
-reduced architectural versatility
Types of CBFs Types of CBFs
SingleDiagonal InvertedV-Bracing V-Bracing
X-Bracing Two Story X-Bracing
Inelastic Response of CBFs under Earthquake Loading Inelastic Response of CBFs under Earthquake Loading
T i B Yi ld C i B B kl TensionBrace: Yields
(ductile)
CompressionBrace: Buckles
(nonductile)
Columns andbeams: remainessentially elastic y
C i B T i B ( i l i CompressionBrace
(previously intension):
Buckles
(nonductile)
TensionBrace(previously in
compression): Yields
(ductile)
( )
Columns andbeams: remainessentially elastic
Eccentrically Braced Frames (EBFs) Eccentrically Braced Frames (EBFs)
Framing systemwith beam, columns and braces. At least one end of
every brace is connected to isolate a segment of the beamcalled a every brace is connected to isolate a segment of the beamcalled a
link.
Resist lateral load through a combination of frame action and truss Resist lateral load through a combination of frame action and truss
action. EBFs can be viewed as a hybrid systembetween moment
frames and concentrically braced frames.
Develop ductility through inelastic action in thelinks.
EBFs can supply high levels of ductility (similar to MRFs), but can
also provide high levels of elastic stiffness (similar to CBFs)
e
Link
e Link
e
Link
e Link
Some possible bracing arrangement for EBFS
e e e e
e
e
e
Inelastic Response of EBFs
Buckling Buckling--Restrained Braced Frames (BRBFs) Restrained Braced Frames (BRBFs)
Type of concentrically braced frame Type of concentrically braced frame.
Beams, columns and braces arranged to forma vertical truss.
Resist lateral earthquake forces by truss action. Resist lateral earthquake forces by truss action.
Special type of brace members used: Buckling-Restrained
Braces (BRBs). BRBS yield both in tension and compression ( ) y p
-no buckling !!
Develop ductility through inelastic action (cyclic tension and
compression yielding) in BRBs.
Systemcombines high stiffness with high ductility.
Buckling Buckling- -Restrained Brace Restrained Brace
Buckling Buckling-
RestrainedBrace:
Steel Core
++
Casing
Casing
Steel Core
Buckling Buckling-
RestrainedBrace:
Steel Core
+
A
+
Casing
A
S l C
Casing
Steel Core
Casing
Steel jacket
Mortar
S ti AA
Debondingmaterial
Mortar
Section A-A
P
P
Steel coreresists entire axial force P
Casingis debonded fromsteel core g
-casing does not resist axial force P
-flexural stiffness of casing restrains buckling of core
Buckling Buckling-
RestrainedBrace:
Steel Core
++
Casing
Steel Core
Yi ldi S t YieldingSegment
Coreprojection and
braceconnection braceconnection
segment
Bracing Configurations for BRBFs Bracing Configurations for BRBFs
SingleDiagonal InvertedV-Bracing V-Bracing
X-Bracing Two Story X-Bracing
Inelastic Response of BRBFs under Earthquake Loading Inelastic Response of BRBFs under Earthquake Loading
T i B Yi ld C i B Yi ld TensionBrace: Yields CompressionBrace: Yields
Columns andbeams: remainessentially elastic y
C i B Yi ld T i B Yi ld CompressionBrace: Yields TensionBrace: Yields
Columns andbeams: remainessentially elastic
Special Plate Shear Walls (SPSW) Special Plate Shear Walls (SPSW)
Assemblage of consisting of rigid frame infilled with thin Assemblage of consisting of rigid frame, infilled with thin
steel plates.
Under lateral load, systembehaves similar to a plate girder. Under lateral load, systembehaves similar to a plate girder.
Wall plate buckles under diagonal compression and forms
tension field.
Develop ductility through tension yielding of wall plate along
diagonal tension field diagonal tension field.
Systemcombines high stiffness with high ductility Systemcombines high stiffness with high ductility.
Plate Plate--Girder Analogy Girder Analogy Plate Plate Girder Analogy Girder Analogy
Inelastic Response of a SPSW Inelastic Response of a SPSW
Development of
Inelastic Response of a SPSW Inelastic Response of a SPSW
tension diagonals
Shear buckling
2005 AISC Seismic Provisions 2005 AISC Seismic Provisions

AISC Seismic Design-ModuleUG-Brief Overview

Uploaded by

Copyright:

Available Formats

AISC Seismic Design-ModuleUG-Brief Overview

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AISC Seismic Design-ModuleUG-Brief Overview

Uploaded by

Copyright:

Available Formats

Design of Seismic Design of Seismic Design of Seismic Design of Seismic--

Resistant Steel Resistant Steel

You might also like