Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Design Drawing

    Uploaded by

    keith11221
    This document contains drawings and specifications for erecting scaffolding. It includes plan, front, side, and rear elevation views of the scaffold design. Notes provide information on allowable loads, required bracing, tie-ins to the existing building, and design loads for the scaffolding. Dimensions, materials, and anchoring details are specified to construct the scaffolding according to the approved design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design Drawing

    Uploaded by

    keith11221
    2K views1 page
    This document contains drawings and specifications for erecting scaffolding. It includes plan, front, side, and rear elevation views of the scaffold design. Notes provide information on allowable loads, required bracing, tie-ins to the existing building, and design loads for the scaffolding. Dimensions, materials, and anchoring details are specified to construct the scaffolding according to the approved design.

    Original Description:

    sketch

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains drawings and specifications for erecting scaffolding. It includes plan, front, side, and rear elevation views of the scaffold design. Notes provide information on allowable loads, required bracing, tie-ins to the existing building, and design loads for the scaffolding. Dimensions, materials, and anchoring details are specified to construct the scaffolding according to the approved design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views1 page

    Design Drawing

    Uploaded by

    keith11221
    This document contains drawings and specifications for erecting scaffolding. It includes plan, front, side, and rear elevation views of the scaffold design. Notes provide information on allowable loads, required bracing, tie-ins to the existing building, and design loads for the scaffolding. Dimensions, materials, and anchoring details are specified to construct the scaffolding according to the approved design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    2440 2440 2440 2440 2440

    2
    4
    4
    0
    2
    4
    4
    0
    2
    4
    4
    0
    2
    4
    4
    0
    2
    4
    4
    0
    2440 2440 2440 2440 2440 2440
    2
    4
    4
    0
    2
    4
    4
    0
    2
    4
    4
    0
    800
    1
    2
    7
    0
    2440 2440 2440
    2440
    2440 2440 2440 2440 2440 2440
    2440 2440 2440 2440
    800
    2440 2440 2440 2440 2440 1270 1270
    VARIES
    2
    7
    0
    0
    1
    9
    8
    0
    1
    9
    8
    0
    2
    7
    0
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    2
    7
    0
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    2440
    1
    2
    7
    0
    1
    2
    7
    0
    2
    7
    0
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1
    9
    8
    0
    1270
    800
    1
    2
    7
    0
    8
    0
    0
    2
    4
    4
    0
    2
    4
    4
    0
    2
    4
    4
    0
    1
    9
    8
    0
    2440 2440 2440 800
    THE SCAFFOLD STRUCTURE DETAILED ON THIS DRAWING
    HAS BEEN DESIGNED TO BE ERECTED USING ONLY MATERIALS
    SUPPLIED OR APPROVED BY SAFE ACCESS (HIGHLAND) LTD
    (Highland) Ltd
    PLAN VIEW
    NOTES:
    - DUE TO UNFORESEEN SITE CIRCUMSTANCES, THE SCAFFOLD ERECTED MAY DIFFER FROM THAT NOTED. IF IN ANY DOUBT CONTACT SAFE ACCESS
    (HIGHLAND) LTD TO DISCUSS.
    - ALL ALLOWABLE LOADS AND DETAILS ARE BASED ON THE USE OF EQUIPMENT WITH SWL RATINGS IN ACCORDANCE WITH GENUINE KWIKSTAGE
    COMPONENTS.
    - CLIENT TO ENSURE FIRM & LEVEL BASES CAPABLE OF SAFELY SUPPORTING LOAD FROM SCAFFOLDING WITHOUT UNDUE SETTLEMENT OR DEFLECTION.
    - BUTTRESS & LOADING BAY TO BE ERECTED IN ACCORDANCE WITH EQUIPMENT USER MANUAL.
    - ALL SCAFFOLD MATERIALS TO COMPLY WITH BS 1139.
    WORKING DRAWING
    FRONT ELEVATION
    SIDE ELEVATION
    REAR ELEVATION
    A: 22b Longman Drive
    Inverness
    IV1 1SU
    T: 01463 (711750)
    M: 07527 135487
    E: [email protected]
    W: www.safe-access.co.uk
    CLIENT TO ENSURE GROUND BEARING
    PRESSURES ADEQUATE TO SUPPORT
    AXIAL LOADS IMPOSED BY UPRIGHTS
    ADEQUATE SOLE
    BOARDS MUST BE USED
    TO TRANSER AXIAL LEG
    LOAD TO THE GROUND
    GENERAL NOTES:
    A) This drawing is confidential and the exclusive property of Safe Access (Highland) Ltd.
    No unauthorised use, copy or disclosure is to be made and it is to be returned upon request.
    B) Construct in full compliance with BS EN 12811-1 (TG20:08) unless noted otherwise.
    C) Scaffold built from tubular materials and fittings conforming to BS 1139 : 1982 or type 4
    tube to BS EN 39. All tube must be in 'as new' condition.
    D) Scaffold built with load bearing fittings, except intermediate bearers below platform level
    and boards fixed with non-load bearing fittings.
    E) This drawing has been prepared from details supplied to us by the enquirer/client, who
    should check that we have correctly interpreted his/her requirements and that all loadings,
    dimensions, details, erection and striking sequences are correct and practicable. No
    alteration in the loading may be made without prior reference.
    F) The client is to prepare and ensure that any foundations/supports are suitable for
    supporting the loads imposed upon it by our scaffold including its working load.
    G) No sheeting whatsoever, unless already shown, should be added to the scaffold without
    prior reference.
    H) It is the responsibillity of the client/enquirer to ensure that adequate facilities or tying the
    scaffold are made available and that the building or structure is capable of withstanding the
    loads applied to it by the scaffold and its working load.
    I) No ties or braces re to be removed or any modifications to be made to the scaffold without
    prior reference.
    J) The enquirer/client is to design, supply and fix all necessary auxiliary equipment including
    but not limited to, shuttering, timber, bearers, steel joists and to ensure that such auxiliary
    equipment is capable of safely transmitting the loads to the standards.
    K) The enquirer/client will be responsible for setting out and final leveling of scaffolding or
    similar equipment used as a system support.
    L) All dimensions are as stated or as calculated
    M) This drawing has been prepared on the assumption that all loads will be applied axially to
    the tubes unless specifically stated.
    DESIGN LOADS:
    THIS SCAFFOLD HAS BEEN DESIGNED FOR THE FOLLOWING:-
    1 N0. LlFT3 _2.0 |N/r
    1 N0. LlFT3 _1.0 |N/r
    THE CLIENT MUST ENSURE THAT NO LOADS IMPOSED ARE GREATER
    THAN THE ALLOWABLE STATED LOADS
    R.MAIR
    RETURN TRANSOMS
    TO BE USED WITH ALL
    GAPS FILLED USING
    LAPPING BOARDS
    AND TUBE & FITTING
    ADEQUATE TIMBER SOLE BOARDS TO BE
    USED TRANSFERRING LEG LOADS TO
    0R0uN0. VlN 0.1r
    CLIENT TO CONFIRM SUITABILITY OF
    BUILDING STRUCTURE TO SUSTAIN
    LOADS TRANSFERRED FROM THE
    SCAFFOLD
    ANCHORS SHOULD BE INSTALLED
    ONLY BY TRAINED PERSONNEL
    USING THE CORRECT TOOLS AND
    STRICTLY IN ACCORDANCE WITH
    MANUFACTURERS INSTRUCTIONS
    SIDE ELEVATION
    RETURN TRANSOM
    TO BE USED AT ALL
    90 lNTER3ECTl0N3
    FIRST LIFT HEIGHT TO
    BE DETERMINED ON
    SITE BY CLIENT AGENT
    ELEVATION TO BE TIED
    INTO EXISITNG
    BUILDING AND BUTTED
    ON BOTH SIDES
    DUE TO SITE CONDITIONS, ALL ELEVATIONS TO BE
    TIED INTO EXISTING BUILDING USING M16 ANCHORS.
    CLIENT TO ENSURE BUILDING IS CAPABLE OF
    WITHSTANDING LOADS IMPOSED BY SCAFFOLD
    ALL GAPS TO BE FILLED
    USING TUBE & FITTING
    AND LAPPING BOARDS
    LOADING:
    1 No. w0RKlN0 LlFT _2.00 |N/r
    1 No. w0RKlN0 LlFT _1.00 |N/r
    ALL lN3l0E 80AR03 0.Z5 |N/r
    ADJACENT
    UPRIGHTS TIED
    USING SHORT TUBE
    AN0 90 C0uPLER3
    LEDGER BRACING
    REQUIRED FIXED TO
    UPRIGHTS WITHIN 300mm
    OF NODE POINT
    DOUBLE GUARD RAILS
    AND TOEBOARDS ON ALL
    WORKING LIFTS
    FRONT ELEVATION HAS
    BEEN DESIGNED TO
    HAVE 3 No. WORKING
    LIFTS DEBRIS NETTED
    2.7m PAVEMENT
    GANTRY. TO BE TIED
    AT FIRST LIFT
    FACE BRACING
    INSTALLED AS PER
    KWIKSTAGE USER
    MANUAL
    PLAN BRACING
    REQUIRED IF TIES
    CANNOT BE INSTALLED
    TWO WAY TIE USING HILTI
    M16 ANCHOR WITH TUBE AND
    COUPLERS
    TUBE WITH JACK BUTTED
    AGAINST BUILDING
    GRANTOWN ON SPEY. MORAY SHIRE
    ALTITUDE, A = 222 m ABOVE SEA LEVEL
    WIND FACTOR, S = 29.33
    PLAN BRACING
    SECURED TO
    UPRIGHTS AS SHOWN
    Hilti M16 HKD with Scaffold Ring Bolt (58253).
    Min embedment depth - 65mm
    Min edge distance - 230mm
    Min corner distance -230mm
    Anchor capacity should be determined on site
    by testing. Concrete SWL : 6.1kN
    ANCHOR DETAIL
    PLAN BRACING
    REQUIRED
    MAX LEG LOAD:
    11.54 kN
    MAX LEG
    LOAD: 8.96 kN
    1 No. INSIDE
    GUARD RAIL
    1:10 @A1
    PEDESTRIAN WALKWAY.
    ALL STANDARDS SHOULD
    BE ENCLOSED TO PREVENT
    HARM TO PUBLIC
    PUBLIC
    ACCESS
    PUBLIC
    ACCESS
    2 No. 9m APOLLO
    X-BEAMSLACED AND
    BRACED IN PAIRS @
    1m INTERVALS
    9m APOLLO X-BEAMS.
    BRACED AT 1m INTERVALS.
    FIXED TO UPRIGHTS USING
    RIGHT ANGLE COUPLERS

    You might also like