0% found this document useful (0 votes)
521 views8 pages

Allwin Calibration Guide

1. The document provides instructions for calibrating a printer using a calibration wizard. It describes checking printed patterns and making physical adjustments if patterns are not aligned properly. 2. It involves printing patterns to calibrate angles, positions, speeds and alignments of print heads, nozzles, and lines. Numbers are input to adjust positions until patterns are perfectly even and aligned. 3. Steps are repeated as needed until all printed calibration patterns are arranged evenly with positions at 0, indicating calibration is complete.

Uploaded by

praneeth7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
521 views8 pages

Allwin Calibration Guide

1. The document provides instructions for calibrating a printer using a calibration wizard. It describes checking printed patterns and making physical adjustments if patterns are not aligned properly. 2. It involves printing patterns to calibrate angles, positions, speeds and alignments of print heads, nozzles, and lines. Numbers are input to adjust positions until patterns are perfectly even and aligned. 3. Steps are repeated as needed until all printed calibration patterns are arranged evenly with positions at 0, indicating calibration is complete.

Uploaded by

praneeth7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

1 Staggered arrangement

Run the tool menu---calibration wizard function.






Angle Check to check the printed pattern, see figure:

OK
















NG: If the pattern is not in a line, the operator need to do the physical position
adjustment

Vertical check, check the printed pattern, see figure:

OK









NG: If the pattern is not vertical, the operator need to do the physical position
adjustment



Yellow head and blue
nozzle calibration: The
16th root of red as the
base line will be yellow
and blue overlap
alignment to the bottom
line.








Yellow need
up a little



















This
should be
an equal
distance
between
two
Black nozzle calibration:
1, used with the magnifying glass engraved
with the red measuring the distance between
two adjacent lines.
2, to pitch the bottom line and red-based,
mobile black nozzle.










2 Normal arrangement
Run the tool menu---calibration wizard function.







Angle Check to check the printed pattern, see figure:

OK


The first group head



The second group head






NG: If the pattern is not in a line, the operator need to do the physical position
adjustment










Vertical check, check the printed pattern, see figure:

OK


The first group head


The second group head



NG: If the pattern is not vertical, the operator need to do the physical position
adjustment









M of the first group and M of the second
group appear overlap, vertical direction
adjustment head.


After the above operation, click next:


Choice speed: High speed; Medium speed or low speed
The horizontal left calibration, perform the print, check the printed pattern, take M as an
Example, see figure:




This position M and K completely to evenness
The choice pattern to the evenness position, and input correspondence numeral, the
method
is to add or subtract to the original foundation. Duplication this step, until the best
position is on 0 position arrangement.

Click next, the horizontal right calibration, perform print, check the pattern, take M as
an example, see figure below:



This position M and K completely to
evenness
The choice pattern to the evenness position, and input correspondence numeral, the
method
is adds together in the original foundation. Duplication this step, is most evenness until 0
position arrangement.

Click next, the Bidirection calibration, perform print, check the pattern, see figure
below:




This position K completely to evenness

The choice pattern to the evenness position, and input correspondence numeral, the
method
is adds together in the original foundation. Duplication this step, until 0
position arrangement.

Click next, step calibration, chose the pass first, perform print, check pattern, see figure
below:











This position line horizontal arrangement is most evenness



The choice pattern to the uneven position, and input correspondence numeral, the method
is adds together in the original foundation. Duplication this step, is most uneven until 0
position arrangement.



Click next, vertical calibration, perform print, check pattern, see figure below:





This position line horizontal arrangement is most evenness

The choice pattern to the uneven position, and input correspondence numeral, the method
is adds together in the original foundation. Duplication this step, is most evenness until 0
position arrangement.

Click next, complete the calibration.

You might also like