1

M.E. (All Branches)

Exam. May,2014
NORTH MAHARASHTRA UNIVERSITY, JALGAON
Circular No. 109 of 2014
Programme of the M. E. (All Branches) Examinations May., 2014

1. Candidates are required to be present at their respective places of the Examinations fifteen minutes before the
time for paper.
2. Candidates are forbidden to take any material into the Examination Hall, with a view to prevent malpractices at
the time of examinations.
3. Candidates are requested to see the Notice-Board at their respective places of examination regularly, for changes
if any notified later, in the programme.
4. Candidates are requested to note the date, day, time and place of every paper on every day.
5. Candidates are permitted to use stencils at the time of examinations.
6. Candidates for the examination are expected to provide themselves with slide-rules.
7. The exchange or loan of slide-rules, drawing instruments or other materials used in the examination, is not
permitted while the examination is in progress. Candidates must bring their own instruments and will not be
allowed to borrow from each other under any circumstances.
8. The Term Work Assessment will be held at the respective Engineering College.
9. Use of non-programmable, battery operated Electronic Calculator of pockets is allowed. The Exchange of
Calculator is not allowed.
10. No request for any special concession, such as change in time or day fixed for the University Examination on
religious or any other ground, shall be granted.
11.University reserves right to make timely changes in examination time-table in an eventuality of a sudden
announcement / declaration of a holiday by the Govt. and / or holding of MPSC / UPSC Competitive
Examinations by the Government.
12. Center for the Examination will be as under
Sr. College & Course Centre
1. SSTS, College of Engineering, Bambhori SSTS, College of Engineering, Bambhori
2. Govt. College of Engineering, Jalgaon Govt. College of Engineering, Jalgaon
3. SGD.College of Engineering, Jalgaon SGD, College of Engineering, Jalgaon
4. Raisoni.College of Engineering, Jalgaon Raisoni.College of Engineering, Jalgaon
5. Godavari College of Engineering,Jalgaon Godavari College of Engineering, Jalgaon
6. SSGB College of Engineering, Bhusawal SSGB,College of Engineering, Bhusawal
7. JTM College of Engineering, Faizpur JTM College of Engineering, Faizpur
8. SSVPS, College of Engineering, Dhule SSVPS, College of Engineering, Dhule
9. D.N.Patel College of Engineering,Shahada D.N.Patel College of Engineering,Shahada
10
11
RCP, College of Engineering, Shirpur
KCES College of Enginggering,Jalgaon
RCP, College of Engineering, Shirpur
KCES College of Enginggering,Jalgaon
The written examinations will be conducted in the following order
TIME-TABLE
Day & Date Subject & Time 10.00 a.m. to 1.00 P.m. Sub Code
SEM-I Elective-I
Thursday
15.05.2014



M. E. (Civil )
Building Science & Technology

1. Operation Research
2. Environmental Risk Assessment and
Hazard Management
3. Work Study and Incentive Management
1051
1052

1053
M. E. (Civil )
Environmental Engineering

1. Environmental Sanitation
2. Remote Sensing, GIS and its Environmental
Application
3. Rural Water Supply & Sanitation
1051
1052

1053
M. E. (Civil )
Construction Tech. &
Management

1. Advance Construction Technology - I
2. Infrastructure Development
3. Repairs, Rehabilitation, Retrofitting of Structure
4. Building Environment & Services
1051
1052
1053
1054
M. E. (Civil )
Infrastructure Engineering &
Management
1. Highway Projects Planning Designing &
Economic Evaluation
2. Retrofitting and Rehabilitation of Structures
3. Ports & Harbor Structures
1051

1052
1053
M. E. (Mechanical)
Machine Design/ Design Engg.

1. Instrumentation & Automatic Control System
2. Design of Pressure Vessel
3. Design of Material Handing Equipment
1052
1051
1053
M. E. (Mechanical)
General

1. Advanced Machine Design.
2. Internal Combustion Engine.
3. Analysis & Synthesis of Machanisms
4. Computer Aided Manufacturing
5. Theory of Elasticity & Plasticity
1051
1053
1054
1055
1056
M. E. (Mechanical)
Computer Aided Analysis &
Design


1. Design of Pressure Vessel
2. Computer Aided Engineering
1051
1052
M. E. (Mechanical)
Thermal Engineering


1. Power Plant Engineering
2. Internal Combustion Engine
3. Solar Energy Technology
4. Finite Element Analysis
5. Gas Turbines & Jet Propulsion
1055
1051
1052
1053
1054


2


M.E. (All Branches)
Exam. May,2014


Day & Date Subject & Time 10.00 a.m. to 1.00 P.m. Sub Code
SEM-I Elective-I
Thursday
15.05.2014




M. E. ( Computer Science &
Engineering)
1. Embedded Software Design
2. Digital Image & Video Processing
3. Mathematical Foundations of Computer Science
4. Software Project Management
1051
1052
1053
1054
M. E. ( E& T.C)
VLSI & Embedded System
Design.
1. Advanced Digital Signal Processing.
2. Computer Networks & Management.
3. Artificial Neural Networks & Fuzzy Systems
4. Wireless Communication System.
1051
1052
1053
1054
M. E. ( Electronics
&Telecommunication )
Digital Electronics
1. Parallel Computing
2. Biomedical Instrumentation
3. Wireless & Mobile Communication
1051
1052
1053
M. E. (Electronics
&Telecommunication )
Digital Systems
1. Image Processing & Computer Vision
2. Computer Architecture
3. Artificial Intelligence & Neural Networks
1051
1052
1053
M. E. ( Electronics
&Telecommunication )
Communication Engg
1. Modeling and Simulation.
2. Advanced Telecomm. Network Management
3. Linear System Theory
4. Optimization Technique
5. Random Processes
1051
1052
1053
1054
1055
M. E. ( Electrical Power System )

1. FACTs & Power Quality
2. Artificial Intelligence and its Applications in Power Systems
3. Renewable Energy Sources.
4. Power Sector Economics, Management and
Restructuring
1051
1052
1053
1054

SEM : II Elective-II
Friday
16.05.2014
M. E. (Civil )
Building Science & Technology

1. Architecture & Town Planning
2. Probability Statistics & Optimization
Technique
3. Environment Impact Assessment
1122
1121

1123
M. E. (Civil )
Environmental Engineering

1. Design of Water Supply & Waste Water
Structures
2. Environmental Impact Assessment
3. Solid Waste & Management
1121

1122
1123
M. E. (Civil )
Construction Tech. &
Management

1. Advanced Construction Technology - II
2. Construction Disaster Management
3. Advanced RCC Structure
4. Architecture & Town Planning
1121
1122
1123
1124
M. E. (Civil )
Infrastructure Engineering &
Management
1. Geo. Techniques for Infrastructure
2. Resources Management
3. Urban Hydrology and Storm Water Management.
1101
1102
1103
M. E. (Mechanical)
Machine Design




1. Robotics
2. Automotive Design
3. Design for Manufacture &Assembly
1122
1121
1123
M.E. (Mechanical)
General
1. Advance Robotics
2. Process Equipment Design
3. Alternate Energy Sources
4. Design of Heat Exchanger
5. Design of Pumps & Compressors

1101
1103
1104
1105
1106

M.E. (Mechanical)
Computer Aided Analysis &
Design
1. Design For Manufacturing & Assembly

1101

M. E. (Mechanical)
Thermal Engineering
1. Non Conventional Power Plant
2. Advanced Air Conditioning
3. Convective Heat Transfer Analysis
4. Equipment Design for Thermal Systems
5. Research Methodology
6. Turbomachinary
1121
1122
1123
1124
1125
1126

3

M.E. (All Branches)
Exam. May,2014

Day & Date Subject & Time 10.00 a.m. to 1.00 P.m . Sub Code

SEM : II Elective-II
Friday
16.05.2014
M. E. ( Computer Science &
Engineering )
1. Software Testing & Quality Assurance
2. Cryptography & Network Security
3. Pattern Recognition
4. Mobile Computing
1101
1102
1103
1104
M. E. ( E & T.C)
VLSI & Embedded System Design
1. Image & Video Processing
2. Electromagnetic Interference &
Compatibility
3. FPGA Based System Design
4.RF. Circuit Design.
1101
1102

1103
1104
M. E. ( Electronics &
Telecommunication )
Digital Electronics
1. Advanced Digital Communication
2. Artificial Intelligence
3. Modeling & Simulation
Techniques
1121
1122
1123
M. E. ( Electronics &
Telecommunication )
Digital Systems
1. Biomedical Signal Processing
2. Pattern Recognition & Classification
3. Nanotechnology
1121
1122
1123
M. E. ( Electronics & Tele. /
Electronics / Communication )
Communication Engg.
1. Multimedia Communication
2. Error Control Codes
3. Advanced Embedded System Design
4. Speech and Audio Processing
5. Artificial Intelligence & Soft Computing
1121
1122
1123
1124
1125
M.E. (Electrical Power System )




1. Advanced Power System Protection
2. Power Electronics Applications in Power
Systems
3. EHV Transmission Systems
4. Power System Design

1121
1122

1123
1124
Saturday
17.05.2014
M.E. (Mechanical)
( Computer Aided Analysis &Design )
M. E. (Mechanical) Machine Design




SEM-II / Elective-II
Machine tool Design (Elective- II )
Machine tool Design

1102
1100
SEM : I
Monday
19.05.2014
M. E. (Civil )
Building Science & Technology
*Advance Design of Concrete Structures
* ( Time : 10.00 am to 02.00 pm)
1030
M. E. (Civil )
Environmental Engineering
Air Pollution

1030
M. E. (Civil )
Construction Tech. & Management
Construction Safety

1040
M.E. (Mechanical)
Machine Design/Design Engg.
M. E. (Mechanical)
Computer Aided Analysis & Design
Tribology

Tribology (Elective- I )
1040

1053
M. E. ( Computer Science &
Engineering )
Applied Algorithms

1040
M. E (Electronics &
Telecommunication )
Digital Electronics
VLSI Design

1040
M. E. ( Electronics &
Telecommunication )
Digital Systems
Biomedical Engineering Systems

1040
M. E. ( Electronics & Tele. /
Electronics & Communication )
Communication Engg.
Advanced Communication Systems. 1040
M.E. (Mechanical)
General
Advanced Heat Transfer

Advanced Heat Transfer
1010
M. E. (Mechanical)
Thermal Engineering
1010
M. E. (Civil )
Infrastructure Engineering & Management
Construction Planning Scheduling &
Management
1010
M. E. ( E & T. C)
VLSI & Embedded System Design.
Microprocessor & Microcontroller
Interfacing

1010

M. E. ( Electrical Power System )


Power System Optimization Techniques
1010





4



M.E. (All Branches)
Exam. May,2014

Day & Date Subject & Time 10.00 a.m. to 1.00 P.m. Sub Code
SEM : II
Tuesday
20.05.2014
M. E. (Civil )
Building Science & Technology
Construction Techniques and Equipments

1080
M. E. (Civil )
Environmental Engineering
Water shed Management

1110
M. E. (Civil )
Construction Tech. & Management
Advanced Construction Equipments

1110
M. E. (Civil )
Infrastructure Engineering & Management
Environment & Energy Management.

1090
M. E. (Mechanical)
Machine Design
Machatronic Product Design 1110
M. E. (Mechanical)
Thermal Engineering
Advanced Fluid Mechanics 1080
M.E. (Mechanical) General Advanced Fluid Mechanics 1090
M. E. (Computer Science &
Engineering)
Soft Computing

1090
M. E. ( E & T.C)
VLSI & Embedded System Design
Nano Electronics 1090
M.E. (Electronics Telecommunication
Digital Electronics
Advanced Computer Network

1110
M.E. (Electronics&Telecommunication
Digital Systems
Operating System

1110
M. E. ( Electronics & Tele. /
Electronics &Communication )
Communication Engg.
Antenna Theory & Design 1110
M.E. (Electrical Power System ) \

Computer Methods in Power System
Analysis
1080

SEM : I

Wednesday
21.05.2014
M. E. (Civil )
Building Science & Technology
Contracts & Valuation

1040
M. E. (Civil )
Environmental Engineering
Design, Operation and Maintenance of Water
Supply and Sewerage Systems
1020
M. E. (Civil )
Construction Tech. & Management
Construction Cost & Quality Management

1030
M. E. (Mechanical)
Machine Design/ Design Engg.
Vibration Engineering 1030
M. E. ( Computer Science &
Engineering )
Net Centric Computing

1030
M. E. ( Electronics &
Telecommunication )
Digital Electronics
Digital System Design

1030
M. E. ( Electronics &
Telecommunication )
Digital Systems
Embedded Systems

1030
M. E. ( Electronics & Tele. /
Electronics & Communication )
Communication Engg.
Advanced Light Wave Communication 1030
M.E. (Mechanical)
General
Refrigeration & Air Conditioning 1020
M.E. (Mechanical)
( Computer Aided Analysis & Design )
Computer Aided Design 1020
M. E. (Civil )
Infrastructure Engineering & Management
Contracts Administration & Arbitration 1020
M. E. ( E & T.C)
VLSI & Embedded System Design
Embedded System Design

1020
M. E. ( Electrical Power System ) Microprocessor and Microcontroller 1020












5




M.E. (All Branches)
Exam. May,2014

Day & Date Subject & Time 10.00 a.m. to 1.00 P.m. Sub Code
SEM : II
Thursday
22.05.2014
M. E. (Civil )
Building Science & Technology
*Earthquake Resistant Design of Building
* ( Time : 10.00 am to 02.00 pm)
1090
M. E. (Civil )
Environmental Engineering
Industrial Water and Waste Water
Management

1100
M. E. (Civil )
Construction Tech. & Management
Construction Economics & Finance

1100
M. E. (Civil )
Infrastructure Engineering & Management
Advanced Concrete Technology 1080
M.E. (Mechanical)
General
Mechanical Design Analysis 1080
M.E. (Mechanical)
Computer Aided Analysis & Design
Design of Experiments & Analysis 1080
M. E. (Mechanical)
Thermal Engineering
Advanced Refrigeration 1090
M. E. (Computer Science &
Engineering)
Parallel Computing 1080
M. E. ( E & T.C)
VLSI & Embedded System Design
Analog VLSI Design 1080
M. E.
(Electronics&Telecommunication)
Digital Electronics
Microelectronic Circuit Design

1100
M. E.
(Electronics&Telecommunication)
Digital Systems
Digital System Design

1100
M. E. ( Electronics &Tele. /Electronics
& Communication )
Communication Engg.
Mobile Communication

1100
M.E. (Electrical Power System )

Digital Signal Processing 1090
SEM : I
Friday
23.05.2014
M. E. (Civil )
Building Science & Technology
Construction & Project Management

1020
M. E. (Civil )
Environmental Engineering
Environmental Engineering Chemistry

1040
M. E. (Civil )
Construction Tech. & Management
New Construction Materials & Techniques

1020
M. E. (Mechanical)
Machine Design/ Design Engg.
Computer Methods in Mechanical Design 1020
M. E. ( Computer Science &
Engineering )
Distributed Systems

1020
M.E. (Electronics &
Telecommunication )
Digital Electronics
Advanced Digital Signal Processing

1020
M. E. ( Electronics &
Telecommunication )
Digital Systems
Signal Processing & Applications

1020
M. E. ( Electronics & Tele. /
Electronics & Communication)
Communication Engg.
Advanced VLSI Design

1020
M.E. (Mechanical)
( Computer Aided Analysis &Design )
Mechanical Vibration. 1040

M.E. (Mechanical)
General


Mechanical Vibration.

1030
M. E. (Mechanical)
Thermal Engineering
Advanced Thermodynamics and Gas
Dyanamics
1020
M. E. (Civil )
Infrastructure Engineering & Management
Life Cycle costing of Infrastructures. 1030
M. E. ( E & T.C)
VLSI & Embedded System Design.
Digital VLSI Design.

1030

M. E. ( Electrical Power System )

Power System Planning & Reliability.
1030





6




M.E. (All Branches)
Exam. May,2014

Day & Date Subject & Time 10.00 a.m. to 1.00 P.m . Sub Code
SEM : II
Saturday
24.05.2014
M. E. (Civil )
Building Science & Technology
Low Cost Housing

1100
M. E. (Civil )
Environmental Engineering
Advanced Waste Water Treatment
Technology
1090
M. E. (Civil )
Construction Tech. & Management
Construction Contract Administration &
Management

1090
M. E. (Civil )
Infrastructure Engineering & Management
Safety Management in Construction 1070
M. E. (Mechanical)
Machine Design
Optimization Techniques in Design 1090
M.E. (Mechanical)
General
Instrumentation & Automatic Control 1070
M.E. (Mechanical)
Computer Aided Analysis &Design
System Dynamics & Simulation 1070
M. E. ( Computer Science &
Engineering )
Web Engineering 1070
M. E. ( E & T.C)
VLSI & Embedded System Design
Embedded Networking & Wireless Sensor
Network
1070
M. E. ( Electronics &
Telecommunication )
Digital Electronics
Embedded System Design.

1090
M. E. ( Electronics &
Telecommunication )
Digital Systems
Digital Communication Systems 1090
M. E. ( Electronics & Tele. /
Electronics & Communication)
Communication Engg.
Communication System Design


1090
M.E. (Electrical Power System )

Power System Modeling & Control 1100

SEM : I
Monday
26.05.2014
M. E. (Civil ) Building Science
& Technology
Building Environment & Services

1010
M. E. (Civil )
Environmental Engineering
Environmental Engineering Microbiology

1010
M. E. (Civil )
Construction Tech. & Management
Management & Project Planning in
Construction
1010
M. E. (Mechanical)
Machine Design/ Design Engg.
Advanced Mechanical Engineering Design
of Equipment
1010
M. E. ( Computer Science &
Engineering )
Advanced Software Engineering

1010
M.E. (Electronics & Telecommunication )
Digital Electronics
Advanced Instrumentation System

1010
M. E. ( Electronics &
Telecommunication )
Digital Systems
Digital Integrated Circuits & Systems

1010
M.E. (Electronics & Tele. /Electronics &
Communication) ( Communication Engg.)
Advanced Digital Signal Processing &
Processors
1010
M.E. (Mechanical)
General
Finite Element Analysis. 1040
M.E. (Mechanical)
Computer Aided Analysis &Design
Finite Element Analysis

1010
M. E. (Mechanical)
Thermal Engineering
Energy Conservation and Management 1030
M. E. (Civil )
Infrastructure Engineering & Management


Irrigation Water Distribution Systems.

1040
M. E. ( E & T.C)
VLSI & Embedded System Design
VLSI. Testing & Verification.

1040
M.E. (Electrical Power System ) Power System Dynamics. 1040







7






M.E. (All Branches)
Exam. May,2014

Day & Date Subject & Time 10.00 a.m. to 1.00 P.m. Sub Code
SEM : II

Tuesday
27.05.2014
M.E. (Mechanical)
Computer Aided Analysis& Design
Design & Synthesis of Mechanism 1090
M. E. (Mechanical)
Machine Design
Design & Synthesis of Mechanism 1080

SEM : I
Wednesday
28.05.2014
M.E. (Mechanical)
Computer Aided Analysis &Design
Machine Design (Sem-I) 1030
M. E. (Mechanical)
Thermal Engineering
Measurement Techniques & Data Analysis 1040
M.E. (Mechanical)
General
Measurement Techniques & Data Analysis
ELECTIVE-I
1052

SEM : II
Thursday
29.05.2014
M. E. (Civil )
Building Science & Technology
Construction Cost Dynamics

1110
M. E. (Civil )
Environmental Engineering
Advanced Water Treatment Technology

1080
M. E. (Civil )
Construction Tech. & Management
Resource Management

1080
M. E. (Civil )
Infrastructure Engineering &
Management
Construction Methods & Equipment
Management
1060
M.E. (Mechanical)
General
Optimization Techniques

1060
M.E. (Mechanical)
Computer Aided Analysis &Design
Optimization Techniques 1060
M. E. (Mechanical)
Thermal Engineering
Numerical Methods in Thermal and Fluid
Engineering
1110
M. E. (Computer Science &
Engineering )
Advanced Database Management Systems

1060
M. E. ( E & T.C)
VLSI & Embedded System Design
Real Time Operating System 1060
M.E. (Electronics
&Telecommunication)
Digital Electronics
Image Processing & Pattern Recognition

1080
M.E. Electronics&Telecommunication)
Digital Systems
Computer Networks

1080
M. E. (Electronics & Tele. / Electronics
& Communication)
Communication Engg.
Advanced Digital Image Processing 1080
M.E. (Electrical Power System )

High Voltage Power Transmission 1110

Friday
30.05.2014
M. E. (Mechanical)
Thermal Engineering
Computational Fluid Dynamics 1100
M.E. (Mechanical)
General
Computational Fluid Dynamics
ELECTIVE-II
1102
M.E. (Mechanical)
Computer Aided Analysis &Design
Computational Fluid Dynamics
ELECTIVE-II
1103

*Please Note the Timing


DR. D.N.GUJARATHI
CONTROLLER OF EXAMINATIONS


Post Box No. 80,
Jalgaon 425 001,
NMU /M.E../7B / 2240 /2014
Date : 22/04/2014