CRANES

PERFORMANCE JIB CRANES

CAPACITIES:
SPANS:
ROTATION:
STYLES:

1/4 to 5 tons
Up to 30'
Manual or Motorized
Free Standing, Wall Mounted or Gantry

Figure A

WORK STATION JIB CRANES

WORK STATION JIB CRANES

F E AT U R E S :

Work Station Jib Cranes are the ideal substitute for

Tapered roller pivot bearings and trunnion rollers for

traditional, heavy I-Beam Jib Cranes. These jibs are

designed to service circular areas and support tool
balancers, air balancers, vacuum lifters and hoists.
When column or wall mounted, they can handle up
to a 200 rotation. When floor mounted, they can
accommodate up to a 360 rotation. Capacities are

ease of rotation.
Enclosed track boom that virtually eliminates dirt
and dust.
High-strength, lightweight, low-headroom
boom assemblies.
Many of the smaller, lighter capacity jibs can be

available from 100 lbs. to 1000 lbs. with spans up

mounted on any normal 6 reinforced concrete

to 16 ft.

floor (no foundation required; contact the factory

for details).
Enclosed track boom provides effortless trolley
movement and virtually eliminates dust and dirt.

NINE REASONS WHY YOU SHOULD CHOOSE

GORBEL CRANES
1
ARTICULATING JIB CRANES
This versatile crane can move loads around corners,
reach into machines or doorways, and swing under
obstructions. This crane is also perfect in applications
that require an operator to rotate the jib in close to
its pivot point. Capacities from 150 lbs. to 2000 lbs.
with spans up to 16 ft.
AL100 WALL BRACKET
WORK STATION JIB CRANES
200 ROTATION
The AL100 Wall Bracket Work Station Jib Crane
utilizes Gorbels patented lightweight, high-strength
extruded aluminum enclosed track. This revolutionary
track reduces the rotational dead weight of the boom
by 56% to 68%, making the jib up to 40% easier to
rotate than comparable I-beam Jibs. The tie rod
design minimizes deflection and is more precise
when positioning loads than other jibs.

PORTABLE BASES
The portable bases allow jibs to be picked up with
a fork truck and moved anywhere in a facility.
They are available in capacities up to 1000 lbs.
and spans up to 16 ft.

Ease of Operation

5 years on Manual Cranes

This helps reduce injuries and

2 years on Motorized Cranes

increase productivity.

I n d u s t r y s B e s t D e l i v e r y

Local Representation

5-Day Shipments are available for all

Gorbel Jib and Gantry Cranes are

manually operated cranes in this

sold and serviced by a nationwide

brochure. 2- or 3-Day service is also

network of material handling

available

specialists that provide material

(premium service).

Multiple Shipping Points

With multiple manufacturing facilities,

handling solutions.
3

Fork Truck Pockets

I n d u s t r y s B e s t Wa r r a n t y

Ve r s a t i l i t y

we ship from the closest plant which

Gorbel makes a complete line of

lowers freight costs and reduces

jib cranes to meet the needs of

shipping damage.

the material handler.

I f i t s l a t e , w e p a y

Safety

the freight

All cranes are pre-engineered for

When delivery is critical, you can

powered hoist operationwith a

depend on Gorbel. Upon request, we

factor of 15% of the Jib capacity

will guarantee your crane will be ready

for the combined weight of the

for shipment on the promised date or

hoist and trolley and an additional

we will pay the freight

factor of 25% of the jib capacity

(see dealer for details).

for the impact of powered hoists*.

Ease of Installation

*Note impact-ratings are designed to

All components are built and

assembled with jigs and fixtures which
ensure easy installation.

accommodate standard powered chain

hoists with lift speeds up to 30 f.p.m. Highspeed hoists, wire rope hoists, and magnet
use may require an additional impact factor.

MOTORIZED JIB CRANES

FS300DD

Motorized Jibs are available in the Free Standing, Wall Cantilever,

Wall Bracket, and Mast Type Series. Retrofit Motorized kits for Free
Standing Jibs are also available.

WHY A GORBEL MOTORIZED JIB CRANE?

Gorbel Motorized Jibs are not mere adaptations. They are totally
conceived as motorized products, with all the outstanding features
of our standard jibs, plus these:
WB100MD

Variable Frequency Drives (VFD) are standard on all Motorized Jib

Cranes. The drive can be configured for single or multiple speeds.
Precision drive assembly with field adjustable torque limiter for
added drive protection.
Worm gear reducer with oil bath lubrication for reliable operation,
and low maintenance. Worm gear reducer includes overload safety
clutch.
Totally enclosed, fan cooled, 3 phase Class B, 40C ambient

WC200MD

continuous,"C" faced motor, 30 minute rated, is standard.

Direct drive for all series of jib cranes allows for accurate and
consistent positioning of loads. This modular drive design makes
maintenance easy and reduces long term costs.
Wall Cantilever and Mast Type masts are boxed for extra rigidity
to withstand the forces of a Motorized Crane and provide more
precise load control.

MT400MD

RETROFIT EXISTING JIBS WITH

M O T O R I Z E D R O TAT I O N
The Retrofit Traction Drive kit will fit all Free Standing Jibs with box-style
head assemblies no matter who made your jib crane. The modular drive
assembly bolts to the back of the box-style head assembly. The drive
powers large, heavy-walled rollers. The drive roller is easily adjusted to
ensure a constant driving force. This is a great way to upgrade an existing
Free Standing Jib Crane with motorized power making the Retrofit Kit a
great, cost-effective way to solve workers compensation or safety problems.
Retrofit Traction Drive kits are available for indoor applications up to 5 ton
with spans to 20 feet.
This Retrofit Motorized FS300 Free Standing Jib Crane gives
operators the control needed to quickly and precisely
position loads.

SUPERIOR LOAD POSITIONING CONTROL PACKAGES

F E AT U R E S O F M O T O R I Z E D
C O N T R O L PA C K A G E
Variable Frequency Drive (VFD) is standard.
The Variable Frequency Drive can be used in one, two, or three speed
applications.
Variable Frequency Drive provides the ultimate in load control.
The VFD provides the ultimate in load control and positioning from the
slowest possible creep speed up to maximum speed. The VFD is up to 25
times smoother than ballast resistor controls, does not produce extensive
heat, and enables precise starting and stopping.
Easily adjustable speed control.
Through a simple keypad on the VFD, the acceleration rate, deceleration
The direct drive powers the rotation of the
Free Standing Crane. A speed of 1/2 RPM is
standard.

rate and rotation speed can be adjusted to fit your application. This allows
you to customize the performance of the Jib to your exact requirements.
Designed for indoor and outdoor use.
When being used outdoors, the cranes are designed to operate in winds
of 15 mph or less, based on a maximum load surface of 64 square feet.
Consult the factory for applications exceeding these standards.
Standard NEMA Rated Control Enclosure.
Gorbels standard control enclosure meets the requirements for NEMA
3R, 12, 4, and 4X environments. Optional enclosures are available for
other environments.
Low maintenance costs.
The VFD eliminates the need for magnetic reversing contactors, reduces
the number of wearable components in the panel, and reduces long-term
maintenance costs.

Variable Speed Controls provide the

ultimate in jib crane rotation control from
creep speed to maximum speed.
5

M A X I M U M V E R S AT I L I T Y
AND PERFORMANCE
Gorbel's most versatile crane. Perfect for underneath
large bridge cranes, in open areas where it can serve
several work stations, in outdoor applications such as
loading docks, or in machining and assembly operations
where it can be overlapped with other jibs to provide
staged operation.

FREE STANDING JIB CRANES

G O R B E L ' S A D VA N TA G E

FS350INSERT
SLEEVE MOUNTED

FS350INSERT
MOUNTED

FS300BASEPLATE
MOUNTED

E A S E O F O P E R AT I O N
Allows operators to position loads precisely, effortlessly
and efficiently.
Precision tapered roller bearings in top pivot and trunnion
assemblies provide smooth operation and long life.
Full supporting triangular base plate gussets are used (in
lieu of struts) to minimize crane deflection, thus making it
easier to accurately position loads.

E A S E O F I N S TA L L AT I O N

SAFETY

Independent head assembly, installed separately from the

Head retaining pin provides the resistance to accidental

boom for easier installation.

Recessed bearing assembly allows greatly reduced
clearances needed for installation.
Bolted head/boom connection which permits separate

upward dislodgement of the head.

Pre-engineered for use with powered hoists. A factor of
15% of the jib crane capacity is allowed for the hoist and
trolley weight with an additional 25% of the capacity

installation and provides maximum lift for the hoist, since

allowed for impact, thus, giving maximum capacity use of

it can be installed very close to the underside of the lower

the jib.

ceiling obstruction for greater headroom.

Movable bolted trolley stops.

P O W E R R O TAT I O N

In-head totally enclosed, bottom entry collector assembly

Is optional

(see pages 4 & 5 for details).

allows the option of easily adding power to the hoist for

360 rotation at the time of or after purchase.
Mast Diameter E

8"

12"

14"

16"

18"

20"

24"

30"

Number of
Anchor Bolts

12

12

12

12

12

Bolt Diameter (D)

1" 1.25" 1.25" 1.25" 1.25" 1.25" 1.25" 1.25"

Bolt Circle* (Q)

24"

24"

30"

36"

42"

48"

54"

Note: For jib crane foundation requirements, overturning moment, axial load and anchor bolt pull
out forces, consult your local Gorbel dealer.
*Note: Dimensions from corners of the hexagonal baseplate are 6" longer than the corresponding
bolt circle.

60"

FS300 BASEPLATE MOUNTED

SPAN A
Capacity

Dim B

8'

10'

12'

14'

16'

18'

20'

1/4 TON

8'

FS300-8-6

FS300-8-6

FS300-8-6

FS300-12-8

FS300-12-8

FS300-12-10

FS300-12-10

10'

FS300-8-6

FS300-8-6

FS300-8-6

FS300-12-8

FS300-12-8

FS300-12-10

FS300-12-10

12'

FS300-8-6

FS300-8-6

FS300-12-6

FS300-12-8

FS300-12-8

FS300-12-10

FS300-12-10

14'

FS300-8-6

FS300-8-6

FS300-12-6

FS300-12-8

FS300-12-8

FS300-12-10

FS300-14-10

16'

FS300-8-6

FS300-8-6

FS300-12-6

FS300-12-8

FS300-12-8

FS300-12-10

FS300-14-10

18'

FS300-8-6

FS300-12-6

FS300-12-6

FS300-12-8

FS300-14-8

FS300-14-10

FS300-14-10

20'

FS300-8-6

FS300-12-6

FS300-12-6

FS300-14-8

FS300-14-8

FS300-14-10

FS300-16-10

1/2 TON

1 TON

2 TON

3 TON

5 TON

8'

FS300-8-6

FS300-8-6

FS300-12-7

FS300-12-8

FS300-12-10

FS300-12-10

FS300-12-12

10'

FS300-8-6

FS300-8-6

FS300-12-7

FS300-12-8

FS300-12-10

FS300-12-10

FS300-14-12

12'

FS300-8-6

FS300-12-6

FS300-12-7

FS300-12-12

FS300-12-12

FS300-14-16

FS300-14-16

14'

FS300-8-6

FS300-12-6

FS300-12-10

FS300-12-12

FS300-12-12

FS300-14-16

FS300-14-16

16'

FS300-8-6

FS300-12-6

FS300-12-10

FS300-12-12

FS300-14-12

FS300-14-16

FS300-16-16

18'

FS300-8-6

FS300-12-6

FS300-12-10

FS300-14-12

FS300-14-12

FS300-16-16

FS300-16-16

20'

FS300-8-6

FS300-12-6

FS300-14-10

FS300-14-12

FS300-14-12

FS300-16-16

FS300-16-16

8'

FS300-12-7

FS300-12-8

FS300-12-10

FS300-14-12

FS300-14-12

FS300-14-16

FS300-14-16

10'

FS300-12-7

FS300-12-8

FS300-12-10

FS300-14-12

FS300-14-12

FS300-14-16

FS300-14-16

12'

FS300-12-7

FS300-12-8

FS300-14-10

FS300-14-12

FS300-16-12

FS300-16-16

FS300-16-16

14'

FS300-12-7

FS300-12-8

FS300-14-10

FS300-14-12

FS300-16-12

FS300-18-16

FS300-18-16

16'

FS300-12-7

FS300-12-8

FS300-14-10

FS300-16-12

FS300-18-12

FS300-18-16

FS300-18-16

18'

FS300-12-7

FS300-14-8

FS300-16-10

FS300-16-12

FS300-18-12

FS300-18-16

FS300-18-16

20'

FS300-12-7

FS300-14-8

FS300-16-10

FS300-18-12

FS300-18-12

FS300-20-16

FS300-20-16

8'

FS300-14-10

FS300-14-12

FS300-16-12

FS300-16-16

FS300-16-18

FS300-18-18

FS300-18-18

10'

FS300-14-10

FS300-14-12

FS300-16-12

FS300-16-16

FS300-16-18

FS300-18-18

FS300-18-18

12'

FS300-14-10

FS300-14-12

FS300-16-12

FS300-16-16

FS300-16-18

FS300-18-18

FS300-18-18

14'

FS300-14-10

FS300-14-12

FS300-16-12

FS300-16-16

FS300-18-18

FS300-18-18

FS300-20-18

16'

FS300-14-10

FS300-14-12

FS300-16-12

FS300-18-16

FS300-18-18

FS300-18-18

FS300-24-18

18'

FS300-14-10

FS300-16-12

FS300-18-12

FS300-18-16

FS300-20-18

FS300-20-18

FS300-24-18

20'

FS300-14-10

FS300-16-12

FS300-18-12

FS300-18-16

FS300-20-18

FS300-20-18

FS300-24-18

8'

FS300-16-12

FS300-16-16

FS300-18-16

FS300-18-18

FS300-20-18

FS300-20-21

FS300-24-24

10'

FS300-16-12

FS300-16-16

FS300-18-16

FS300-18-18

FS300-20-18

FS300-20-21

FS300-24-24

12'

FS300-16-12

FS300-16-16

FS300-18-16

FS300-18-18

FS300-20-18

FS300-20-21

FS300-24-24

14'

FS300-16-12

FS300-16-16

FS300-18-16

FS300-18-18

FS300-20-18

FS300-20-21

FS300-24-24

16'

FS300-16-12

FS300-16-16

FS300-18-16

FS300-18-18

FS300-20-18

FS300-24-21

FS300-24-24

18'

FS300-16-12

FS300-16-16

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

20'

FS300-16-12

FS300-16-16

FS300-20-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

8'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

10'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

12'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

14'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

16'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

18'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

20'

FS300-18-16

FS300-20-18

FS300-24-18

FS300-24-21

FS300-24-24

FS300-30-24

FS300-30-24

Model Number Explanation

Example: 1/4 Ton FS300-8-6; 1/4 Ton = 500 pound capacity, FS300 = base plate mount style,
8 = mast diameter in inches (E), 6 = boom depth in inches (W). Use "E" dimension on page 4 to determine base plate and anchor bolt dimensions.
Other Models, Sizes and Capacities
FS350 (insert mounted), FS350S (sleeve insert mounted), and other spans, heights, and capacities are available by contacting your local Gorbel Dealer.

Dimensions are subject to change without notice.

THE ECONOMICAL SOLUTION

The Wall Bracket (WB100) Jib is the most economical means of providing
hoist coverage for individual use in bays, along walls or columns of plants,
or as a supplement to an overhead crane or monorail system.
Two key requirements must be met before applying the Wall Bracket Series:
1) A structurally adequate wall or column to support the jib must exist.
2) Sufficient clearance above the boom throughout its arc to
accommodate the tie rod suspension must exist.

G O R B E L ' S A D VA N TA G E
EASE OF MOVEMENT
Low dead weight of the boom combined with bronze bushings and
oil-impregnated bronze thrust washers provide for easy rotation and
superior load positioning.

SAFETY
Formed bracket fittings provide for greater reliability. No welds in
tension, all bolts are in double shear.
Pre-engineered for use with powered hoists. A factor of 15% of the
jib crane capacity is allowed for the hoist and trolley weight with an
additional 25% of the capacity allowed for impact, thus giving maximum
capacity use of the jib.

E A S E O F I N S TA L L AT I O N
Single tie rod, right hand threaded, at both ends for easy boom
adjustment and installation.
All connections bolted, including movable bolted trolley stops.
Grease fittings are provided for easy field lubrication.

2 0 0 P O W E R R O TAT I O N
Is optional

(see pages 4 & 5 for details).

WALL BRACKET JIB CRANES

WB100-WALL BRACKET

TOP BRACKET FITTING

BEAM BRACKET FITTING

BOTTOM BRACKET FITTING

The Thrust & Pull diagram above details the thrust and pull forces that the jib applies to the supporting structure when a load
is lifted. It is essential that a structurally adequate wall or column exists. Refer to the Thrust & Pull chart opposite this page
for exact forces.
Fitting kits are available for fabrication of cranes locally.

Fitting kits are available for fabrication of cranes locally.

WB100 WALL BRACKET

Capacity
1/2 TON

1 TON

2 TON

3 TON

5 TON

Span A

Model
Number

Tie Rod
Diameter

Thrust &
Pull

8'

WB100-G1-8-6

2' 9"

1' 3"

13 1/2"

3 1/2"

3 1/2"

6"

1"

3709#

10'

WB100-G1-10-6

3' 0"

1' 6"

13 1/2"

3 1/2"

3 1/2"

6"

1"

4408#

12'

WB100-G1-12-6

3' 9"

1' 9"

13 1/2"

3 1/2"

3 1/2"

6"

1"

4347#

14'

WB100-G1-14-6

4' 6"

2' 0"

13 1/2"

3 1/2"

3 1/2"

6"

1"

4317#

16'

WB100-G1-16-6

5' 6"

2' 0"

13 1/2"

3 1/2"

3 1/2"

6"

1"

4109#

18'

WB100-G1-18-7

6' 0"

2' 0"

13 1/2"

3 1/2"

3 1/2"

7"

1"

4380#

20'

WB100-G1-20-8

6' 6"

2' 3"

13 1/2"

3 1/2"

3 1/2"

8"

1"

4658#

24'

WB100-G1-24-8c6

7' 6"

2' 6"

13 1/2"

3 1/2"

3 1/2"

8"

1"

5350#

30'

WB100-G1-30-12c8

10' 0"

3' 6"

13 1/2"

3 1/2"

3 1/2"

12"

1"

6009#

8'

WB100-G1-8-6

2' 9"

1' 3"

13 1/2"

3 1/2"

3 1/2"

6"

1"

7273#

10'

WB100-G1-10-6

3' 0"

1' 6"

13 1/2"

3 1/2"

3 1/2"

6"

1"

8608#

12'

WB100-G1-12-6

3' 9"

1' 9"

13 1/2"

3 1/2"

3 1/2"

6"

1"

8453#

14'

WB100-G1-14-7

4' 6"

2' 0"

13 1/2"

3 1/2"

3 1/2"

7"

1"

8422#

16'

WB100-G1-16-7

5' 6"

2' 3"

13 1/2"

3 1/2"

3 1/2"

7"

1"

7992#

18'

WB100-G1-18-8

6' 0"

2' 6"

13 1/2"

3 1/2"

3 1/2"

8"

1"

8430#

20'

WB100-G1-20-10

6' 6"

2' 6"

13 1/2"

3 1/2"

3 1/2"

10"

1"

8966#

24'

WB100-G1-24-10c8

7' 6"

2' 9"

13 1/2"

3 1/2"

3 1/2"

10"

1"

9877#

30'

WB100-G1-30-12c8

10' 0"

3' 6"

13 1/2"

3 1/2"

3 1/2"

12"

1"

10069#

8'

WB100-G2-8-8

2' 9"

1' 3"

13 1/2"

4"

4 1/8"

8"

1 1/2"

14469#

10'

WB100-G2-10-8

3' 0"

1' 6"

13 1/2"

4"

4 1/8"

8"

1 1/2"

17107#

12'

WB100-G2-812-8

3' 9"

1' 9"

13 1/2"

4"

4 1/8"

8"

1 1/2"

16780#

14'

WB100-G2-14-8

4' 6"

2' 0"

13 1/2"

4"

4 1/8"

8"

1 1/2"

16578#

16'

WB100-G2-16-10

5' 6"

2' 3"

13 1/2"

4"

4 1/8"

10"

1 1/2"

15864#

18'

WB100-G2-18-10

6' 0"

2' 3"

13 1/2"

4"

4 1/8"

10"

1 1/2"

16552#

20'

WB100-G2-20-12

6' 6"

2' 6"

13 1/2"

4"

4 1/8"

12"

1 1/2"

17348#

24'

WB100-G2-24-12c8

7' 6"

3' 0"

13 1/2"

4"

4 1/8"

12"

1 1/2"

18836#

30'

WB100-G2-30-12c8

10' 0"

3' 0"

13 1/2"

4"

4 1/8"

12"

1 1/2"

18189#

8'

WB100-G3-8-8

2' 9"

1' 3"

14"

4"

4 5/8"

8"

1 1/2"

21596#

10'

WB100-G3-10-8

3' 3"

1' 6"

14"

4"

4 5/8"

8"

1 1/2"

23545#

12'

WB100-G3-12-10

4' 0"

1' 9"

14"

4"

4 5/8"

10"

1 1/2"

23557#

14'

WB100-G3-14-10

4' 9"

2' 0"

14"

4"

4 5/8"

10"

1 1/2"

23514#

16'

WB100-G3-16-10

5' 6"

2' 3"

14"

4"

4 5/8"

10"

1 1/2"

23500#

18'

WB100-G3-18-12

6' 3"

2' 3"

14"

4"

4 5/8"

12"

1 1/2"

23672#

20'

WB100-G3-20-12c8

7' 0"

2' 6"

14"

4"

4 5/8"

12"

1 1/2"

24037#

24'

WB100-G3-24-12c8

8' 6"

3' 0"

14"

4"

4 5/8"

12"

1 1/2"

24197#

30'

WB100-G3-30-12c8

11' 0"

3' 0"

14"

4"

4 5/8"

12"

1 1/2"

23917#

8'

WB100-G5-8-12

3' 0"

1' 6"

15 1/4"

6"

7"

12"

2"

33006#

10'

WB100-G5-10-12

3' 3"

1' 6"

15 1/4"

6"

7"

12"

2"

39258#

12'

WB100-G5-12-12

4' 0"

1' 9"

15 1/4"

6"

7"

12"

2"

39072#

14'

WB100-G5-14-12

4' 9"

2' 0"

15 1/4"

6"

7"

12"

2"

38972#

16'

WB100-G5-16-16

5' 6"

2' 6"

15 1/4"

6"

7"

16"

2"

39229#

18'

WB100-G5-18-16

6' 3"

3' 0"

15 1/4"

6"

7"

16"

2"

39246#

20'

WB100-G5-20-16c12

7' 0"

3' 6"

15 1/4"

6"

7"

16"

2"

39877#

24'

WB100-G5-24-16c12

8' 6"

3' 6"

15 1/4"

6"

7"

16"

2"

40708#

30'

WB100-G5-30-16c12

11' 0"

3' 6"

15 1/4"

6"

7"

16"

2"

39597#

Model Number Explanation:

Example: 3 Ton WB100-G3-20-12c8: 3 Ton = 6,000 pound capacity, WB100 = wall bracket style, 20 = span (A),
12 = boom depth in inches (W), c8 = 8" cap channel welded to top of boom.
Other Sizes & Capacities
Other spans and capacities are available by contacting your local Gorbel Dealer.

Dimensions are subject to change without notice.

WALL CANTILEVER JIB CRANES

F O R M A X I M U M L I F T:
The Wall Cantilever (WC200) provides hoist coverage and 200
rotation for individual use in bays, along walls or columns of
plants, or as a supplement to an overhead crane or monorail
system. This jib has the advantage of providing maximum lift for
the hoist, since it can be installed very close to the underside of

G O R B E L ' S A D VA N TA G E
EASE OF MOVEMENT
The fittings containing bronze bushings and oil-impregnated
bronze thrust washers which provide for easy rotation and
superior load positioning.

the lowest ceiling obstruction.

SAFETY

Two key requirements must be met before applying the Wall

Fabricated steel fittings provide excellent torsional rigidity.

Cantilever Series:

Pre-engineered for use with powered hoists. A factor of 15%

1) A structurally adequate wall or column to support the jib

of the jib crane capacity is allowed for the hoist and trolley
weight with an additional 25% of the capacity allowed for

must exist.
2) Sufficient clearance above the boom throughout its arc
must exist.

impact, thus giving maximum capacity use of the jib.

E A S E O F I N S TA L L AT I O N
When the bracket center dimension is 6'0" or less, the
WC200WALL CANTILEVER

mast/boom connection is welded. This provides the most

economical means of installation.
When the bracket center is greater than 6'0", a bolted
mast/boom connection is used, which enables the larger
cranes to be shipped disassembled for ease of handling during
shipping and installation.
Grease fitting are provided for easy field lubrication.

2 0 0 P O W E R R O TAT I O N
Is optional

(see pages 4 & 5 details).

TOP AND BOTTOM BRACKET FITTINGS

The diagram above details the thrust and pull forces that the jib crane applies to the supporting
structure when a load is lifted. It is essential that a structurally adequate wall or column exists to
support the jib crane. Refer to the Thrust & Pull chart opposite this page for exact forces.

10

B1, B2, and B3 fitting kits are available for fabrication of cranes locally.

WC200 WALL CANTILEVER

Capacity
1/4 TON

1/2 TON

1 Ton

2 TON

3 TON

5 TON

A Span

Model Number

Thrust and Pull

8'

WC200-B1-8-6

3' 0"

5"

3 1/2"

6"

6"

1767#

10'

WC200-B1-10-6

3' 0"

5"

3 1/2"

6"

6"

2308#

12'

WC200-B1-12-6

3' 0"

5"

3 1/2"

6"

6"

2867#

14'

WC200-B1-14-7

3' 0"

5"

3 1/2"

6"

7"

3533#

16'

WC200-B1-16-8

3' 0"

5"

3 1/2"

6"

8"

4285#

18'

WC200-B1-18-8

4' 0"

5"

3 1/2"

6"

8"

3720#

20'

WC200-B1-20-10

4' 0"

5"

3 1/2"

6"

10"

4595#

8'

WC200-B1-8-7

3' 0"

5"

3 1/2"

6"

7"

3430#

10'

WC200-B1-10-7

3' 0"

5"

3 1/2"

6"

7"

4455#

12'

WC200-B1-12-7

3' 0"

5"

3 1/2"

6"

7"

5501#

14'

WC200-B1-14-8

4' 0"

5"

3 1/2"

6"

8"

5001#

16'

WC200-B1-16-10

4' 0"

5"

3 1/2"

6"

10"

6063#

18'

WC200-B1-18-10

4' 0"

5"

3 1/2"

6"

10"

6979#

20'

WC200-B1-20-12

6' 0"

5"

3 1/2"

6"

12"

5493#

8'

WC200-B1-8-8

4' 0"

5"

3 1/2"

6"

8"

5047#

10'

WC200-B1-10-10

5' 0"

5"

3 1/2"

6"

10"

5294#

12'

WC200-B1-12-10

5' 0"

5"

3 1/2"

6"

10"

6526#

14'

WC200-B1-14-10

5' 0"

5"

3 1/2"

6"

10"

7778#

16'

WC200-B1-16-12

6' 0"

5"

3 1/2"

6"

12"

7678#

18'

WC200-B1-18-16

6' 0"

5"

3 1/2"

6"

16"

9148#

20'

WC200-B1-20-16

6' 0"

5"

3 1/2"

6"

16"

10367#

8'

WC200-B2-8-12

4' 0"

5"

4"

6"

12"

10054#

10'

WC200-B2-10-12

4' 0"

5"

4"

6"

12"

12998#

12'

WC200-B2-12-16

4' 6"

5"

4"

6"

16"

14409#

14'

WC200-B2-14-16

5' 0"

5"

4"

6"

16"

15442#

16'

WC200-B2-16-18

6' 0"

5"

4"

6"

18"

15067#

18'

WC200-B2-18-18

6' 6"

5"

4"

6"

18"

15892#

20'

WC200-B2-20-20

7' 6"

5"

4"

6"

21"

15840#

8'

WC200-B3-8-16

4' 0"

5"

4"

6"

16"

15060#

10'

WC200-B3-10-16

4' 6"

5"

4"

6"

16"

17300#

12'

WC200-B3-12-16

5' 6"

5"

4"

6"

16"

17389#

14'

WC200-B3-14-18

6' 0"

5"

4"

6"

18"

19017#

16'

WC200-B3-16-18

7' 6"

5"

4"

6"

18"

17653#

18'

WC200-B3-18-20

8' 6"

5"

4"

6"

21"

17982#

20'

WC200-B3-20-24

9' 6"

5"

4"

6"

21"

18105#

8'

WC200-B5-8-18

6' 6"

7"

6"

9"

18"

15323#

10'

WC200-B5-10-18

6' 6"

7"

6"

9"

18"

19770#

12'

WC200-B5-12-20

6' 6"

7"

6"

9"

21"

24379#

14'

WC200-B5-14-20

7' 6"

7"

6"

9"

21"

25077#

16'

WC200-B5-16-24

9' 6"

7"

6"

9"

21"

22941#

18'

WC200-B5-18-24

9' 6"

7"

6"

9"

24"

26485#

20'

WC200-B5-20-24

9' 6"

7"

6"

9"

24"

29769#

Model Number Explanation:

Example : 1 Ton WC200-B1-12-10; 1 Ton = 2,000 pound capacity, WC200 = Wall Cantilever style, 12 = span (A), 10 = boom depth in inches (W).
Other Sizes and Capacities
Other spans and capacities are available by contacting your local Gorbel Dealer.

Dimensions are subject to change without notice.

11

THE ECONOMICAL 360 SOLUTION

The MT Series Crane is floor supported, top stabilized, and is capable of
360 rotation via a top and bottom bearing assembly.
Three key requirements must be met before deciding on a Mast Type
Jib Crane:
1. An adequate structural support to stabilize the crane at the top of
the mast must exist. If the jib is installed underneath an overhead
crane runway or building truss, then the deflection of the supporting
member may not exceed 1/2 inch.
2. Clearance overhead for the pivot assembly must exist.
3. Clearance overhead for the boom to rotate must exist.

AVA I L A B L E I N T W O S T Y L E S
1) MT400 FULL CANTILEVERprovides for maximum amount of lift
where full use of available headroom is desired.
2) MT450 DROP CANTILEVERjib boom can be placed at a
specific height to clear overhead obstructions.

MAST TYPE JIB CRANES

MT400FULL CANTILEVER

G O R B E L ' S A D VA N TA G E
ECONOMICAL
Simple, efficient design that usually requires no special foundation
makes the Mast Type Cranes the most cost effective of the 360
rotation jib styles.

EXERTS LESS FORCE ON BUILDING STRUCTURE

Exerts the least amount of force of any Gorbel jib on its supporting
structure.

SAFETY
Utilizes a self-aligning radial bushing at the top which cannot be
displaced, and an identical self-aligning radial bushing at the bottom
which, used in combination with an oil-impregnated bronze thrust
MT450DROP CANTILEVER

washer, provides ease of movement.

Pre-Engineered for use with powered hoists. A factor of 15% of the
jib crane capacity is allowed for the hoist and trolley weight with an
additional 25% of the capacity allowed for impact, thus giving
maximum capacity use of the jib.

PRODUCTIVE
Allows full utilization of the working area with 360 rotation.

M A X I M U M T R O L L E Y T R AV E L
Mast/beam connections eliminate the need for tie rods or knee
braces found on competitive designs, thus permitting maximum
trolley travel.

P O W E R R O TAT I O N
The diagram above details the thrust and pull forces that the jib crane
applies to the supporting structure when a load is lifted. It is essential that a
structurally adequate wall or column exists to support the jib crane. Contact
your local Gorbel Dealer for specific thrust and pull forces.

12

Is optional

(see pages 4 & 5 for details).

MT400 MAST TYPE CRANES

SPAN A
Cap.
1/4 TON

1/2 TON

1 TON

2 TON

3 TON

5 TON

Dim C

8'

10'

12'

14'

16'

18'

20'

10'

MT400-8-6-15

MT400-8-6-15

MT400-8-7-15

MT400-8-8-15

MT400-8-8-15

MT400-10-10-15 MT400-10-10-15

12'

MT400-8-6-15

MT400-8-6-15

MT400-8-7-15

MT400-8-8-15

MT400-8-8-15

MT400-10-10-15 MT400-10-10-15

14'

MT400-8-6-15

MT400-8-6-15

MT400-8-7-15

MT400-8-8-15

MT400-10-8-15

MT400-10-10-15 MT400-10-10-15

16'

MT400-8-6-15

MT400-8-6-15

MT400-8-7-15

MT400-8-8-15

MT400-10-8-15

MT400-10-10-15 MT400-10-10-15

18'

MT400-8-6-15

MT400-8-6-15

MT400-8-7-15

MT400-8-8-15

MT400-10-8-15

MT400-10-10-15 MT400-10-10-15

20'

MT400-8-6-15

MT400-8-6-15

MT400-8-7-15

MT400-10-8-15

MT400-10-8-15

MT400-10-10-15 MT400-14-10-15

10'

MT400-8-6-15

MT400-10-7-15

MT400-10-8-15

MT400-14-10-15 MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

12'

MT400-8-6-15

MT400-10-7-15

MT400-10-8-15

MT400-14-10-15 MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

14'

MT400-8-6-15

MT400-10-7-15

MT400-10-8-15

MT400-14-10-15 MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

16'

MT400-8-6-15

MT400-10-7-15

MT400-10-8-15

MT400-14-10-15 MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

18'

MT400-8-6-15

MT400-10-7-15

MT400-10-8-15

MT400-14-10-15 MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

20'

MT400-10-6-15

MT400-10-7-15

MT400-10-8-15

MT400-14-10-15 MT400-14-10-15

MT400-14-12-15 MT400-16-12-15

10'

MT400-10-8-15

MT400-14-10-15

MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

MT400-16-16-20 MT400-16-16-20

12'

MT400-10-8-15

MT400-14-10-15

MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

MT400-16-16-15 MT400-16-16-20

14'

MT400-10-8-15

MT400-14-10-15

MT400-14-10-15

MT400-14-12-15 MT400-14-12-15

MT400-16-16-15 MT400-16-16-15

16'

MT400-10-8-15

MT400-14-10-15

MT400-14-10-15

MT400-14-12-15 MT400-16-12-15

MT400-16-16-15 MT400-18-16-15

18'

MT400-14-8-15

MT400-14-10-15

MT400-14-10-15

MT400-16-12-15 MT400-16-12-15

MT400-18-16-15 MT400-18-16-15

20'

MT400-14-8-15

MT400-14-10-15

MT400-14-10-15

MT400-16-12-15 MT400-16-12-15

MT400-18-16-15 MT400-18-16-15

10'

MT400-14-10-15

MT400-14-12-20

MT400-16-16-20

MT400-16-16-20 MT400-18-18-20

MT400-18-18-25 MT400-21-21-25

12'

MT400-14-10-15

MT400-14-12-20

MT400-16-16-20

MT400-16-16-20 MT400-18-18-20

MT400-18-18-20 MT400-21-21-20

14'

MT400-14-10-15

MT400-16-12-15

MT400-16-16-20

MT400-18-16-20 MT400-18-18-20

MT400-18-18-20 MT400-21-21-20

16'

MT400-14-10-15

MT400-16-12-15

MT400-18-16-15

MT400-18-16-20 MT400-18-18-20

MT400-18-18-20 MT400-21-21-20

18'

MT400-16-10-15

MT400-16-12-15

MT400-18-16-15

MT400-18-16-15 MT400-18-18-20

MT400-21-18-20 MT400-21-21-20

20'

MT400-16-10-15

MT400-18-12-15

MT400-18-16-15

MT400-18-16-15 MT400-18-18-15

MT400-21-18-20 MT400-21-21-20

10'

MT400-16-12-20

MT400-16-16-20

MT400-18-16-20

MT400-18-18-25 MT400-21-20-25

MT400-21-21-25 MT400-21-24-25

12'

MT400-16-12-20

MT400-16-16-20

MT400-18-16-20

MT400-18-18-25 MT400-21-20-25

MT400-21-21-25 MT400-21-24-25

14'

MT400-16-12-20

MT400-18-16-20

MT400-18-16-20

MT400-18-18-20 MT400-21-20-25

MT400-21-21-25 MT400-21-24-25

16'

MT400-18-12-15

MT400-18-16-20

MT400-18-16-20

MT400-18-18-20 MT400-21-20-20

MT400-21-21-25 MT400-24-24-25

18'

MT400-18-12-15

MT400-18-16-15

MT400-18-16-20

MT400-21-18-20 MT400-21-20-20

MT400-24-21-20 MT400-24-24-25

20'

MT400-18-12-15

MT400-18-16-15

MT400-18-16-20

MT400-21-18-20 MT400-21-20-20

MT400-24-21-20 MT400-24-24-25

10'

MT400-18-18-25

MT400-18-18-25

MT400-21-21-25

MT400-21-21-25 MT400-24-24-25

MT400-24-24-25 MT400-24-24-25

12'

MT400-18-18-25

MT400-18-18-25

MT400-21-21-25

MT400-21-21-25 MT400-24-24-25

MT400-24-24-25 MT400-24-24-25

14'

MT400-18-18-20

MT400-18-18-25

MT400-21-21-25

MT400-21-21-25 MT400-24-24-25

MT400-24-24-25 MT400-27-24-25

16'

MT400-18-18-20

MT400-21-18-20

MT400-21-21-25

MT400-24-21-25 MT400-24-24-25

MT400-27-24-25 MT400-27-24-25

18'

MT400-18-18-20

MT400-21-18-20

MT400-24-21-20

MT400-24-21-25 MT400-27-24-25

MT400-27-24-25 MT400-27-24-25

20'

MT400-21-18-20

MT400-21-18-20

MT400-24-21-20

MT400-24-21-25 MT400-27-24-25

MT400-27-24-25 MT400-27-24-25

Model Number Explanation

Example: 1/2 Ton MT400-8-6-15; 1/2 Ton =1000 pound capacity, MT400 = full cantilever style, 8 = mast wide flange depth in inches (E), 6 = boom depth in inches (W), 15 = mast pivot pin diameter (1.5").
Other Models, Sizes and Capacities
MT450 (drop cantilever), and other spans, heights, and capacities are available by contacting your local Gorbel Dealer.

Dimensions are subject to change without notice.

13

FIXED HEIGHT STEEL GANTRY CRANES

CAPACITY
CAPACITY

A
SPAN

8'

10'

12'
1 TON
15'

20'

25'

8'

10'

12'
2 TON
15'

20'

25'

8'

10'

12'
3 TON
15'

20'

25'

MODEL
NUMBER
FG-1-10-8
FG-1-12-8
FG-1-15-8
FG-1-10-10
FG-1-12-10
FG-1-15-10
FG-1-10-12
FG-1-12-12
FG-1-15-12
FG-1-10-15
FG-1-12-15
FG-1-15-15
FG-1-10-20
FG-1-12-20
FG-1-15-20
FG-1-10-25
FG-1-12-25
FG-1-15-25
FG-2-10-8
FG-2-12-8
FG-2-15-8
FG-2-10-10
FG-2-12-10
FG-2-15-10
FG-2-10-12
FG-2-12-12
FG-2-15-12
FG-2-10-15
FG-2-12-15
FG-2-15-15
FG-2-10-20
FG-2-12-20
FG-2-15-20
FG-2-10-25
FG-2-12-25
FG-2-15-25
FG-3-10-8
FG-3-12-8
FG-3-15-8
FG-3-10-10
FG-3-12-10
FG-3-15-10
FG-3-10-12
FG-3-12-12
FG-3-15-12
FG-3-10-15
FG-3-12-15
FG-3-15-15
FG-3-10-20
FG-3-12-20
FG-3-15-20
FG-3-10-25
FG-3-12-25
FG-3-15-25

B
B HEIGHT
HUB
UNDER
BEAM
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'
10'
12'
15'

C
OAH
10' 6"
12' 6"
15' 6"
10' 6"
12' 6"
15' 6"
10' 6"
12' 6"
15' 6"
10' 7"
12' 7"
15' 7"
10' 10"
12' 10"
15' 10"
11' 0"
13' 0"
16' 0"
10' 8"
12' 8"
15' 8"
10' 8"
12' 8"
15' 8"
10' 8"
12' 8"
15' 8"
10' 10"
12' 10"
15' 10"
11' 0"
13' 0"
16' 0"
11' 3"
13' 3"
16' 3"
10' 10"
12' 10"
15' 10"
10' 10"
12' 10"
15' 10"
10' 10"
12' 10"
15' 10"
11' 0"
13' 0"
16' 0"
11' 3"
13' 3"
16' 3"
11' 6"
13' 6"
16' 6"

D
CLEAR
SPAN
6' 11-1/4"
6' 11-1/4"
6' 10-1/4"
8' 11-1/4"
8' 11-1/4"
8' 10-1/4"
10' 11-1/4"
10' 11-1/4"
10' 10-1/4"
13' 11-1/4"
13' 11-1/4"
13' 10-1/4"
18' 11-1/4"
18' 11-1/4"
18' 10-1/4"
23' 9-1/4"
23' 9-1/4"
23' 8-1/4"
6' 10-1/4"
6' 10-1/4"
6' 9-1/4"
8' 10-1/4"
8' 10-1/4"
8' 9-1/4"
10' 10-1/4"
10' 10-1/4"
10' 9-1/4"
13' 10-1/4"
13' 10-1/4"
13' 9-1/4"
18' 8-1/4"
18' 8-1/4"
18' 7-1/4"
23' 8-1/4"
23' 8-1/4"
23' 7-1/4"
6' 7-1/4"
6' 7-1/4"
6' 7-1/4"
8' 7-1/4"
8' 7-1/4"
8' 7-1/4"
10' 7-1/4"
10' 7-1/4"
10' 7-1/4"
13' 7-1/4"
13' 7-1/4"
13' 7-1/4"
18' 7-1/4"
18' 7-1/4"
18' 7-1/4"
23' 6"
23' 6"
23' 6"

W
I-BEAM
DEPTH
6"
6"
6"
6"
6"
6"
6"
6"
6"
7"
7"
7"
10"
10"
10"
12"
12"
12"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
12"
12"
12"
16"
16"
16"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
16"
16"
16"
18"
18"
18"

All Gantry Cranes shown above, the Tread (E) dimension is 78" between caster pivot centers.
Polyurethane 6"diameter steel casters are standard.
Model Number Explanation:
Example: FG-1-12-8; FG = Fixed Gantry Crane, 1 = 1 Ton (2,000 pound) capacity, 12 = Height Under Beam (B) in feet, 8
= Overall Span (A) in feet. Specifications subject to change without notice. Available in capacities to 5 ton and spans to
30 feet. Special capacities, heights, casters and spans are available. Price on request.

THE MOBILE SOLUTION

Gorbels Fixed Height Steel Gantry Cranes provide an
economical way to lift materials anywhere in a facility.
Gorbels heavy duty end frame design with square tubing
uprights, knee braces and channel base provides stable
lifting and movement.

G O R B E L S A D VA N TA G E
EASE OF MOVEMENT
The non-marking, durable polyurethane casters provide low
rolling resistance for easy movement. The polyurethane
wheel rolls smoothly, even over rough floor surfaces, and
can withstand water, oil and most other chemicals.

SAFETY
Bolted beam to upright connection to ensure that beam
does not dislodge.
Pre-engineered for use with powered hoists. A factor of
15% of the crane capacity is allowed for the hoist and
trolley weight with an additional 25% of the capacity
allowed for impact, thus giving maximum capacity use of
the crane.

14

ADJUSTABLE STEEL GANTRY CRANES

THE FLEXIBLE SOLUTION

Gorbels Adjustable Steel Gantry Crane provides the

CAPACITY
A
CAPACITY SPAN

MODEL
NUMBER

most flexible lifting solution of any style jib crane.

The Adjustable Gantry can be moved to almost any
8'

location and can be easily adjusted to provide

different lifting heights.

10'

1 TON

12'

15'

20'

25'

8'

10'

2 TON

12'

15'

20'

25'

8'

10'

3 TON

12'

E A S E O F I N S TA L L AT I O N
All bolted connections between the beam

15'

and uprights.

OPTIONS

20'

Four position swivel locking casters.

V-groove casters for track mounted cranes.
Steel casters.
Casters with wheel brakes.
V-groove track.

25'

AG-1-7/10-8
AG-1-10/12-8
AG-1-12/15-8
AG-1-7/10-10
AG-1-10/12-10
AG-1-12/15-10
AG-1-7/10-12
AG-1-10/12-12
AG-1-12/15-12
AG-1-7/10-15
AG-1-10/12-15
AG-1-12/15-15
AG-1-7/10-20
AG-1-10/12-20
AG-1-12/15-20
AG-1-7/10-25
AG-1-10/12-25
AG-1-12/15-25
AG-2-7/10-8
AG-2-10/12-8
AG-2-12/15-8
AG-2-7/10-10
AG-2-10/12-10
AG-2-12/15-10
AG-2-7/10-12
AG-2-10/12-12
AG-2-12/15-12
AG-2-7/10-15
AG-2-10/12-15
AG-2-12/15-15
AG-2-7/10-20
AG-2-10/12-20
AG-2-12/15-20
AG-2-7/10-25
AG-2-10/12-25
AG-2-12/15-25
AG-3-7/10-8
AG-3-10/12-8
AG-3-12/15-8
AG-3-7/10-10
AG-3-10/12-10
AG-3-12/15-10
AG-3-7/10-12
AG-3-10/12-12
AG-3-12/15-12
AG-3-7/10-15
AG-3-10/12-15
AG-3-12/15-15
AG-3-7/10-20
AG-3-10/12-20
AG-3-12/15-20
AG-3-7/10-25
AG-3-10/12-25
AG-3-12/15-25

B HEIGHT
B
UNDER
HUB
BEAM
MIN/MAX
MIN/MAX
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'
7' to 10'
10' to 12'
12' to 15'

C
OAH
MIN/MAX

D
CLEAR
SPAN

W
I-BEAM
DEPTH

7' 6" to 10' 6"

10' 6" to 12' 6"
12' 6" to 15' 6"
7' 6" to 10' 6"
10' 6" to 12' 6"
12' 6" to 15' 6"
7' 6" to 10' 6"
10' 6" to 12' 6"
12' 6" to 15' 6"
7' 7" to 10' 7"
10' 7" to 12' 7"
12' 7" to 15' 7"
7' 10" to 10' 10"
10' 10" to 12' 10"
12' 10" to 15' 10"
8' 0" to 11' 0"
11' 0" to 13' 0"
13' 0" to 16' 0"
7' 8" to 10' 8"
10' 8" to 12' 8"
12' 8" to 15' 8"
7' 8" to 10' 8"
10' 8" to 12' 8"
12' 8" to 15' 8"
7' 8" to 10' 8"
10' 8" to 12' 8"
12' 8" to 15' 8"
7' 10" to 10' 10"
10' 10" to 12' 10"
12' 10" to 15' 10"
8' 0" to 11' 0"
11' 0" to 13' 0"
13' 0" to 16' 0"
8' 3" to 11' 3"
11' 3" to 13' 3"
13' 3" to 16' 3"
7' 10" to 10' 10"
10' 10" to 12' 10"
12' 10" to 15' 10"
7' 10" to 10' 10"
10' 10" to 12' 10"
12' 10" to 15' 10"
7' 10" to 10' 10"
10' 10" to 12' 10"
12' 10" to 15' 10"
8' 0" to 11' 0"
11' 0" to 13' 0"
13' 0" to 16' 0"
8' 3" to 11' 3"
11' 3" to 13' 3"
13' 3" to 16' 3"
8' 6" to 11' 6"
11' 6" to 13' 6"
13' 6" to 16' 6"

6' 10-5/8"
6' 10-5/8"
6' 9-5/8"
8' 10-5/8"
8' 10-5/8"
8' 9-5/8"
10' 10-5/8"
10' 10-5/8"
10' 9-5/8"
13' 10-5/8"
13' 10-5/8"
13' 9-5/8"
18' 10-5/8"
18' 10-5/8"
18' 9-5/8"
23' 8-5/8"
23' 8-5/8"
23' 7-5/8"
6' 9-5/8"
6' 9-5/8"
6' 8-5/8"
8' 9-5/8"
8' 9-5/8"
8' 8-5/8"
10' 9-5/8"
10' 9-5/8"
10' 8-5/8"
13' 9-5/8"
13' 9-5/8"
13' 8-5/8"
18' 7-5/8"
18' 7-5/8"
18' 6-5/8"
23' 7-5/8"
23' 7-5/8"
23' 6-5/8"
6' 6-5/8"
6' 6-5/8"
6' 6-1/2"
8' 6-5/8"
8' 6-5/8"
8' 6-1/2"
10' 6-5/8"
10' 6-5/8"
10' 6-1/2"
13' 6-5/8"
13' 6-5/8"
13' 6-1/2"
18' 6-5/8"
18' 6-5/8"
18' 6-1/2"
23' 5-3/8"
23' 5-3/8"
23' 5-1/4"

6"
6"
6"
6"
6"
6"
6"
6"
6"
7"
7"
7"
10"
10"
10"
12"
12"
12"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
12"
12"
12"
16"
16"
16"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
16"
16"
16"
18"
18"
18"

All Gantry Cranes shown above, the Tread (E) dimension is 78" between caster pivot centers.
Polyurethane 6"diameter steel casters are standard.
Model Number Explanation:
Example: AG-1-12/15-20; AG = Adjustable Gantry Crane, 1 = 1 Ton (2,000 pound) capacity, 12/15 = min /
max Height Under Beam (B) in feet, 20 = Overall Span (A) in feet.
Specifications subject to
change without notice. Available in capacities to 5 ton and spans to 30 feet. Special capacities, heights,
casters and spans are available. Price on request.

15

BRIDGE CRANES

CRANES
CAPACITIES:
SPANS:
ENCLOSED TRACKS:
PRODUCTIVITY:

CRANES

CEILING MOUNTED
WORK STATION BRIDGE CRANES & MONORAILS

FREE STANDING
WORK STATION BRIDGE CRANES & MONORAILS

Up to 4000 lbs

CAPACITIES:
SPANS:

Up to 30'
Steel, Aluminum & Stainless Steel

ENCLOSED TRACKS:

Average 28% Increase

PRODUCTIVITY:

FREE STANDING

FOR MORE INFORMATION

Up to 4000 lbs
Up to 30'
Steel, Aluminum & Stainless Steel
Average 28% increase

CEILING MOUNTED

ERGONOMIC STUDY

ERGONOMIC LIFTING

Your authorized Gorbel dealer can give you

more information on what makes Gorbel's
Ergonomic Work Station Cranes and other
material handling products "A Class Above."

G-FORCE

EASY ARM

ERGONOMIC STUDY

JIB CRANES

CRANES
PERFORMANCE JIB CRANES

CAPACITIES:
SPANS:
ROTATION:
STYLES:

CRANES
GANTRY CRANES

1/4 to 5 tons

CAPACITIES:

Up to 30'

SPANS:

Manual or Motorized

TRACKS:

Free Standing, Wall Mounted or Gantry

JIB CRANES

OPTIONS:

CRANES
WORK STATION JIB CRANES

Up to 5 tons

CAPACITIES:

Up to 30'

SPANS:

Steel

TRACKS:

Fixed or Adjustable

GANTRY CRANES

PRODUCTIVITY:

CRANES
ARTICULATING WORK STATION JIB CRANES

Up to 2000 lbs
Up to 30'
Steel, Aluminum & Stainless Steel
Average 28% increase

CAPACITIES:
SPANS:

APPLICATIONS:

Up to 2000 lbs
Up to 16'
Reaching around or under obstructions
Reaching through doorways

WORK STATION JIBS

ARTICULATING JIBS

TRACTOR DRIVES

INTERLOCK/TRANSFER

SPECIALTY PRODUCTS

SEISMIC ZONE IV

TELESCOPING

CRANES
GORBEL
600 Fishers Run
PO Box 593
Fishers, NY 14453 USA

800.821.0086
585.924.6262
F 585.924.6273
E [email protected]
T
T