Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Carel Humisteam X-Plus Steam Humidifiers Brochure

    Uploaded by

    e-ComfortUSA
    HumiSteam X-Plus Steam Immersed Electrode Humidifier with LCD Display Digital Controller, is the result of CAREL’s thirty-year experience in the field of steam humidification, and is the most rational choice for a wide variety of applications: civil environments, offices, industrial facilities and steam baths. The Carel humiSteam X-Plus humidifiers have been designed to offer maximum reliability, minimum maintenance and ease of use. This has been made possible by the development of custom microprocessor-based controls that fully monitor and automate all functions of humiSteam, while allowing the customer to choose between economical on/off operation or stand-alone / DDC proportional operation By combining its engineering expertise with technological innovations, Carel has been able to redefine residential Steam Humidification by introducing THE "HEALTH CONSCIOUS" SYSTEM THAT IS RIGHT FOR YOU.The operation of immersed electrode steam humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water until producing steam (Joule effect). The quantity of steam produced is proportional to the electric current, which is in turn proportional to the level of water. This electric current is measured by a current transformer: by varying the level of water using a fill and drain electrovalve, the current, and consequently the steam production, can be precisely modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam does not carry minerals, the salt concentration in the water and therefore the conductivity increases, meaning that the water has to be periodically diluted by draining part of it using the drain solenoid valve and replacing it with fresh water. In addition, lime scale is deposited over time and covers part of the cylinder, which must be replaced or cleaned. The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing. CAREL has been manufacturing immersed electrode steam humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software. The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam. Customers benefit from clean, fresh air in a more comfortable environment, while optimizing energy efficiency and protecting their homes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Carel Humisteam X-Plus Steam Humidifiers Brochure

    Uploaded by

    e-ComfortUSA
    1K views4 pages
    HumiSteam X-Plus Steam Immersed Electrode Humidifier with LCD Display Digital Controller, is the result of CAREL’s thirty-year experience in the field of steam humidification, and is the most rational choice for a wide variety of applications: civil environments, offices, industrial facilities and steam baths. The Carel humiSteam X-Plus humidifiers have been designed to offer maximum reliability, minimum maintenance and ease of use. This has been made possible by the development of custom microprocessor-based controls that fully monitor and automate all functions of humiSteam, while allowing the customer to choose between economical on/off operation or stand-alone / DDC proportional operation By combining its engineering expertise with technological innovations, Carel has been able to redefine residential Steam Humidification by introducing THE "HEALTH CONSCIOUS" SYSTEM THAT IS RIGHT FOR YOU.The operation of immersed electrode steam humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water until producing steam (Joule effect). The quantity of steam produced is proportional to the electric current, which is in turn proportional to the level of water. This electric current is measured by a current transformer: by varying the level of water using a fill and drain electrovalve, the current, and consequently the steam production, can be precisely modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam does not carry minerals, the salt concentration in the water and therefore the conductivity increases, meaning that the water has to be periodically diluted by draining part of it using the drain solenoid valve and replacing it with fresh water. In addition, lime scale is deposited over time and covers part of the cylinder, which must be replaced or cleaned. The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing. CAREL has been manufacturing immersed electrode steam humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software. The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam. Customers benefit from clean, fresh air in a more comfortable environment, while optimizing energy efficiency and protecting their homes.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HumiSteam X-Plus Steam Immersed Electrode Humidifier with LCD Display Digital Controller, is the result of CAREL’s thirty-year experience in the field of steam humidification, and is the most rational choice for a wide variety of applications: civil environments, offices, industrial facilities and steam baths. The Carel humiSteam X-Plus humidifiers have been designed to offer maximum reliability, minimum maintenance and ease of use. This has been made possible by the development of custom microprocessor-based controls that fully monitor and automate all functions of humiSteam, while allowing the customer to choose between economical on/off operation or stand-alone / DDC proportional operation By combining its engineering expertise with technological innovations, Carel has been able to redefine residential Steam Humidification by introducing THE "HEALTH CONSCIOUS" SYSTEM THAT IS RIGHT FOR YOU.The operation of immersed electrode steam humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water until producing steam (Joule effect). The quantity of steam produced is proportional to the electric current, which is in turn proportional to the level of water. This electric current is measured by a current transformer: by varying the level of water using a fill and drain electrovalve, the current, and consequently the steam production, can be precisely modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam does not carry minerals, the salt concentration in the water and therefore the conductivity increases, meaning that the water has to be periodically diluted by draining part of it using the drain solenoid valve and replacing it with fresh water. In addition, lime scale is deposited over time and covers part of the cylinder, which must be replaced or cleaned. The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing. CAREL has been manufacturing immersed electrode steam humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software. The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam. Customers benefit from clean, fresh air in a more comfortable environment, while optimizing energy efficiency and protecting their homes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views4 pages

    Carel Humisteam X-Plus Steam Humidifiers Brochure

    Uploaded by

    e-ComfortUSA
    HumiSteam X-Plus Steam Immersed Electrode Humidifier with LCD Display Digital Controller, is the result of CAREL’s thirty-year experience in the field of steam humidification, and is the most rational choice for a wide variety of applications: civil environments, offices, industrial facilities and steam baths. The Carel humiSteam X-Plus humidifiers have been designed to offer maximum reliability, minimum maintenance and ease of use. This has been made possible by the development of custom microprocessor-based controls that fully monitor and automate all functions of humiSteam, while allowing the customer to choose between economical on/off operation or stand-alone / DDC proportional operation By combining its engineering expertise with technological innovations, Carel has been able to redefine residential Steam Humidification by introducing THE "HEALTH CONSCIOUS" SYSTEM THAT IS RIGHT FOR YOU.The operation of immersed electrode steam humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water until producing steam (Joule effect). The quantity of steam produced is proportional to the electric current, which is in turn proportional to the level of water. This electric current is measured by a current transformer: by varying the level of water using a fill and drain electrovalve, the current, and consequently the steam production, can be precisely modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam does not carry minerals, the salt concentration in the water and therefore the conductivity increases, meaning that the water has to be periodically diluted by draining part of it using the drain solenoid valve and replacing it with fresh water. In addition, lime scale is deposited over time and covers part of the cylinder, which must be replaced or cleaned. The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing. CAREL has been manufacturing immersed electrode steam humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software. The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam. Customers benefit from clean, fresh air in a more comfortable environment, while optimizing energy efficiency and protecting their homes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    humiSteam:

    the next generation of


    electrode humidifiers

    I n t e g r a t e d C o n t r o l S o l u t i o n s & E n e r g y S a v i n g s
    humisteam
    advanced technology

    humiSteam, the immersed electrode humidifier, is the • easy to use: large user-friendly control panels with
    culmination of CAREL’s thirty-year experience in the wide graphic LCD & detailed diagnostic information;
    field of steam humidification and the rational choice for • improved reliability: the cylinders have exclusive
    a vast series of applications: civil environments, offices, connectors that do not require tools, and all units are
    industrial facilities, and steam baths. fitted with drain pump;
    • fast performance: the humidifier starts faster and
    Today humiSteam is available in a completely upgraded
    accepts a wider range of supply water conductivity.
    range, in 2 versions:
    The control software automatically adjusts operation
    • humiSteam “basic”, humidifier managed by an
    based on the characteristics of the water, so as to
    external controller or BMS, range from 3.3 to 143 lbs/hr;
    simplify installation and optimize maintenance-free life.
    • humiSteam “X-plus”, with integrated controller and
    All models feature Modbus® connection.
    range from 3.3 to 286 lbs/hr;

    Easy to use: backlit LCD Reliability: cylinders with Performance: the Connectivity:
    for clear understanding quick power connectors unit starts faster and integrated Modbus®
    of the unit status and for easy, fast and risk-free reaches the set point communication
    diagnostics maintenance much quicker protocol
    X-plus controller:
    The type “X” humiSteam humidifiers have a built-in controller with gra-
    phic display and keypad for programming and controlling operation.
    The following modes can be selected:
    • ON/OFF by external humidistat
    • Proportional based on an external voltage or current signal
    • Proportional based on an external signal plus a safety limit probe
    in the duct
    • Modulating based on the set point and a humidity probe reading
    • Modulating based on the set point, a humidity probe reading and
    a limit probe in the duct.
    • Modulating based on the set point and the reading of an external
    temperature probe (e.g. steam baths) The type “x” controllers use all the advantages of pCO technology, the family
    • Controlled by BMS of CAREL programmable controllers:
    • simplicity, with the graphic display and messages in different languages;
    The steam flow-rate is modulated continuously from 20 to 100% of • operation with daily and weekly time bands & variable set points;
    maximum capacity (10 - 100% in the 198 and 286 lbs/hr models). • BMS connectivity via various types of LAN (e.g.: Modbus®, BACnet™, LON®);
    The type “X” humiSteam humidifiers can accept the following signals, • complete diagnostics with text messages, alarm log with time stamping;
    selected on the keypad: voltage-free contact from a humidistat, 0 - 1 V, • remote diagnostics via GSM (optional);
    0 - 10 V, 2 - 10 V, 0 - 20 mA, 4 - 20 mA, 0 - 135 Ohm external load. • automatic draining in standby.

    Basic controller (Y):


    • ON/OFF or proportional control (voltage or current signal);
    • flow-rate modulation: 20% - 100%
    • adjustable maximum capacity
    • cylinder life counter
    • automatic draining in standby
    • complete diagnostics with memory
    The “basic” humidifiers have a large LCD display with numbers and
    graphic icons for easy and intuitive operation.

    ACCESSORIES

    room
    applications

    Probes

    VSDUA0002 & VRDXL0000: DPW*: temperature and


    steam blower humidity probe for civil
    VSDBAS0001: remote support environments

    DPP*: temperature and humidity


    probe for industrial environments

    duct
    applications

    DPD*: temperature and humidity


    DP*: linear steam distributor (inlet Ø 0.86 inch, probe for ducts
    Ø 1.18 inches, Ø 1.57 inches)
    MODELS

    Specifications UE001* UE003* UE005* UE008 UE009* UE010* UE015* UE018* UE025* UE035* UE045* UE065* UE090* UE130*
    General

    +30U238348 - 1.0 - 01.03.2008


    Rated steam production (lbs/hr) 3.3 6.6 11 17.6 19.8 22 33 40 55 77 99 143 198 286
    Power input (kW) 1.12 2.25 3.75 6.00 6.75 7.50 11.25 13.5 18.75 26.25 33.75 48.75 67.5 97.5
    Power supply (other volt. on request)
    • 200, 208 or 230 Vac (+10 to -15%), l l l l
    50/60 Hz single-phase
    • 200, 208, 230 Vac (+10 to -15%), l l l l l l l l
    50/60 Hz three-phase
    • 400, 460, 575 Vac (+10 to -15%),
    l l l l l l l l l l l l
    50/60 Hz, three-phase
    Steam connection (inches) 0.86/1.2 0.86/1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 2x1.6 2x1.6 4x1.6
    Outlet pressure limits (“w.c.) 0 to 6.0 0 to 6.0 0 to 5.2 0 to 5.2 0 to 5.4 0 to 5.4 0 to 5.4 0 to 5.4 0 to 8.0 0 to 8.0 0 to 8.0 0 to 8.0 0 to 8.0 0 to 8.0
    Number of boilers 1 1 2
    Operating conditions 33.8 to 104 °F, 10 to 90% rH non-condensing
    Storage conditions 14 to 158 °F, 5 to 95% rH non-condensing
    Index of protection IP20
    Water fill
    Connection 3/4” NPT male
    Temperature limits (°F) 33.8 to 104
    Water pressure limits (psi) 14.5 to 116
    Instant flow-rate (gpm) 16 29 1.6 1.9 3.7
    Total hardness (°fH) (*) ≤40
    Conductivity limits (µS/cm) (*) 75 to 1250
    Water drain
    Connection Ø 1.57” Ø 1.96“
    Temperature (°F) ≤212
    Instant flow-rate (gpm) 1.9 5.9 11.9
    Steam blower

    CAREL reserves the right to modify or change its products without prior notice.
    Number 1 2 3
    Type VSDU0A* VRDXL*
    Power supply (Vac) 24 230
    Rated power (W) 37 35
    Rated air flow (cfm) 113 382.6
    Network
    Integrated network connections UEX* & UEY*: Modbus®
    Optional network connections UEX* & UEW*: RS485, BACnet™, LON®, Ethernet™, RS232 + GSM (optional)
    Controller UEY* / UEX* UEX*

    UNIT CODE
    options:
    Ø = standard cylinder
    type of controller: C= standard openable cylinder
    X= X-plus controller 1= cylinder for low conductivity
    Y= basic controller 2= openable cylinder for low conductivity

    U E _ _ _ _ _ _ _ _

    steam production: power supply: Ø Ø = European version


    001= 3.3 lbs/hr U= 208 V 1~ U Ø = ETL approved
    © CAREL S.p.A. 2008 all rights reserved

    003= 6.6 lbs/hr D= 230 V 1~ version for the


    005= 11 lbs/hr W= 208 V 3~ American market
    008= 17.6 lbs/hr K= 230 V 3~
    009= 19.8 lbs/hr L= 400 V 3~
    010= 22 lbs/hr M= 460 V 3~
    015= 33 lbs/hr N= 575 V 3~
    018= 40 lbs/hr
    025= 55 lbs/hr
    035= 77 lbs/hr
    045= 99 lbs/hr
    065= 143 lbs/hr
    090= 198 lbs/hr
    130= 286 lbs/hr

    CAREL U.S.A.
    385 S. Oak Street - Manheim, PA 17545
    Phone 717.664.0500 - Fax 717.664.0449
    [email protected] - www.carelusa.com

    You might also like