FarStone RestoreIT 2014

Users Guide



Copyright Notice
No part of this publication may be copied, transmitted, stored in a retrieval system or
translated into any language in any form or by any means without the expressed written
permission of FarStone Technology, Inc.
FarStone grants you the right to use one copy of the enclosed software program (SOFTWARE)
on a single computer. If the SOFTWARE is installed on a network, or more than one user can run
the SOFTWARE at the same time, you must purchase an additional license for each additional
user or computer.

Trademark
FarStone is a trademark of FarStone Technology, Inc. Microsoft, Windows and MS-DOS
are registered trademarks of Microsoft Corporation. Other product names mentioned in this
Users Guide may be trademarks or registered trademarks of their respective companies.
FarStone Technology, Inc.
U.S. Headquarters:
184 Technology Drive, Suite 205,
Irvine, CA 92618,USA
Phone: 949-336-4321
Fax: 949-334-1321
www.farstone.com

Technical Support
Answers to frequently asked questions are posted on our website at
www.farstone.com/support/product-support.htm. For other support issues, please contact
FarStone Technical Support at www.farstone.com/support.
Copyright

2000-2013 FarStone Technology, Inc. All rights reserved.

Contents
Copyright Notice .................................................................................................................................................... 2
Chapter 1: Introduction .......................................................................................................................................... 4
1.1 Product Overview ................................................................................................................................................ 4
Chapter 2: Installing and Uninstalling RestoreIT ................................................................................................... 4
2.1 System Requirements .......................................................................................................................................... 4
2.2 Installing RestoreIT ............................................................................................................................................ 4
2.3 Uninstalling RestoreIT ........................................................................................................................................ 5
Chapter 3: Start Using RestoreIT .......................................................................................................................... 5
3.1 Activation and Deactivation................................................................................................................................. 5
3.1.1 Activation ..................................................................................................................................................... 5
3.1.2 Deactivation ................................................................................................................................................. 8
3.2 Main Console ..................................................................................................................................................... 10
3.2.1 Backup ........................................................................................................................................................ 10
3.2.2 Restore........................................................................................................................................................ 11
3.2.3 Tools ........................................................................................................................................................... 13
3.2.3.1 Mount & Preview Snapshot ................................................................................................................................... 13
3.2.3.2 Unmount preview drive ......................................................................................................................................... 13
3.2.4 Help ............................................................................................................................................................ 13
3.2.5 Settings ....................................................................................................................................................... 14
Chapter 4: RestoreIT Recovery Environment ...................................................................................................... 15
Chapter 5: Glossary .............................................................................................................................................. 16

4

Chapter 1: Introduction
1.1 Product Overview
RestoreIT 2014 backs up an entire computer system to a Secure Zone.
RestoreIT 2014 also provides a fast method to recover from software-related data disasters.
RestoreIT 2014 is sector level backup function.
RestoreIT 2014 stores only the changed data sectors into the Secure Zone. The amount of
storage capacity required for each snapshot is substantially less than the entire amount of data
on the hard drive.
As a result, RestoreIT 2014 offers a significant savings of hard drive space and an increased
restoration and backup speed compared with hard drive imaging or complete disk cloning
methods.
Chapter 2: Installing and Uninstalling RestoreIT
2.1 System Requirements
CPU: Pentium or higher 64 bit CPU
RAM: 1G or more
Operating System Supported: Windows 8 (32 & 64-bit), Windows 7 (32 & 64-bit)
2.2 Installing RestoreIT

1. Select Setup, and click Next.
2. Carefully read the software license agreement. Once you accepted, select I Agree the terms
in the license agreement, and click Next.
3. Enter your personal information and License Key, and click Next.

5


Note
Installation without purchasing a serial number will activate a time-limited
evaluation version of RestoreIT.
4. Select typical installation or custom installation. Click Next to install to the default folder, or
Browse to select another location.
5. Click Install to launch the installation process.
6. Click Finish to complete the installation. You are required to restart your computer to
complete the installation. RestoreIT

will take a system snapshot of your computer after
successful installation.
2.3 Uninstalling RestoreIT
1. From the Windows Start menu, select Start ->Settings->Control Panel.
2. Double-click Add/Remove Programs, and select Change or Remove Programs.
3. Select RestoreIT

2014, and click Remove to begin uninstalling the associated

component.
Chapter 3: Start Using RestoreIT
To launch RestoreIT

, double-click the RestoreIT 2014

icon on your desktop or select Start
> All Programs >FarStone> RestoreIT 2014
3.1 Activation and Deactivation
3.1.1 Activation
When running the product, you may hit Continue without entering a serial number to trigger
a 14 days trial.
Or click Click here to enter your serial number to activate RestoreIT, and the following
window will pop up.

6



Select I have a serial number for this product, and enter your personal information and
serial number. Click Next to continue.
After entering the serial number, you will see the following dialog box:

7


Click Activate Now. Then fill in a website to register the product. Then your installation is
complete
If you do not have internet access, click the blue phrase other activation options. This will
allow you to activate the product via e-mail.

8


*Skip this step unless you do not have internet access for activation.
1. Click Copy to clipboard button to copy the serial number and Mac address to send to the
activation address: [email protected].
2. Our technical support engineer will send you an Activation Code via e-mail. Just put the
activation code to the specified frame once you have received the email from us.
3. Click Activate Now.
3.1.2 Deactivation
Deactivation steps:
1. Click Help on the main console, select Deactivation, you will see the following dialog box:

9


2. Click Deactivate.
3. Click Yes to deactivate successfully, then click Quit.

Tip
If you want to run the program on another computer, please purchase more
licenses or you can also deactivate the program from this computer to free
up the serial number.

10

3.2 Main Console

RestoreIT Main Console
Create a System Snapshot Click here to start creating a Restore Point and secure your
computer.
Return to a System Snapshot Click here to restore the system to a specified system
snapshot.
3.2.1 Backup
Click Backup column on the left side to create a system snapshot.

11


1. Enter a name for the System Snapshot, the default is My System Snapshot (data/time).
2. Click to launch the backup process or click to return to
main page
3. If any program is currently writing data to the hard drive, RestoreIT may not be able to
create a System Snapshot.
4. Click Finish after a System Snapshot has been created.
3.2.2 Restore
Click Restore column on the left side to launch restoration.

12


1. Select the date you want to restore to from the calendar on the left pane, and select the
System Snapshot of that day you would like to restore to on the right pane.
2. Click File Restore to restore specific files in the restoration point. Or click to do a
complete system restore.


Tip
If you choose to restore the C Drive only, the System Recovery only restores
the files on the active partition; All of the System Snapshots created before
the restoration point can only be used to restore the C: drive.

13

3.2.3 Tools
3.2.3.1 Mount & Preview Snapshot
Looking up Mount & Preview Snapshot, please refer to 3.2.2
3.2.3.2 Unmount preview drive
Click here to unmount all previously-mounted partition(s).
3.2.4 Help
Click Help on the left column to look up manual, get technical support, and obtain licenses and
other functions.

14

3.2.5 Settings

Virtual partition Choose to check Enable RestoreIT functions, and use the Resize
virtual partition feature to allocate more backup space to the secured partition.
1). Select Resize virtual partition.
2). Carefully read the popup warning message. Click Yes to continue, and No to cancel.
3). Allocate space from each partition listed for the Secure Zone. The allocated space for the
Secure Zone cannot be larger than the available space.

15

4). Click Next to launch the process.

Note
Changing Secure Zone will delete all your restoration points and restart
your computer.
Schedule Snapshot set snapshot automatically-taken intervals.
Event-Driven Snapshot - RestoreIT will create a snapshot automatically upon certain events.
Such as a new program installation, or any system file is changed.
Automatic Restore - Check Restore the entire hard drive or system partition to the
latest System Snapshot at every startup if needed. This feature is very useful for public
computers, in a school or library for example.
Notification - Check display tray icon and toaster message if necessary.
Security - Choose to set password for uninstallation and entering UI.
Confirm your choice, and click Save& Exit.
Chapter 4: RestoreIT Recovery Environment
To launch the Recovery Environment, press the Restore IT Recovery Environment after the
system POST (Power-On-Self-Test) before Windows

loads.

16


1. System Snapshots will be listed here. Types (automatical snapshot, scheduled snapshot or
manual snapshot) of snapshots have distinctive cons. Select the one you want to restore, and
click Restore.
2. Carefully read the popup note and click Yes to start the restoration.
A complete restore can take 20 seconds up to 10 minutes, depending on the number of files.
Once the system has restarted, your SYSTEM will be restored from the chosen System
Snapshot. All file modifications and additions made after System Snapshot date will be
removed.
Chapter 5: Glossary
Secure Zone
RestoreIT

Secure Zone is a Secured partition that is created on the hard drive. This
location is hidden, protected, and accessible only by RestoreIT

. The Secure Zone is used

to store the system snapshots and the RestoreIT

Pre-OS environment. It will not be

17

affected by most computer disasters, so it ensures the protection of your data and allows
high efficiency.
System Snapshot
System Snapshots are incremental points-in-time of a computer systems state at a given
moment. RestoreIT monitors all sector-level changes from the last Snapshot and writes
any changes to a new Snapshot. This backup usually takes only seconds to complete.
Snapshots offer the quickest way to restore a damaged Windows system to a working
state.
System Partition
The system partition refers to the disk volume that contains the hardware-specific files that
are needed to launch Windows (for example: Ntldr, Boot.ini, and Ntdetect.com). On
dynamic disks, this is known as the system volume.
Boot Partition
The boot partition refers to the disk volume that contains the Windows operating system
files (by default, in the WINDOWS folder) and its support files (by default in the
WINDOWS\System32 folder). The boot partition can, but is not required, to be the same
partition as the system partition. There will be one (and only one) system partition, but
there will be one boot partition for each operating system in a multi-boot system. On
dynamic disks, this is known as the boot volume.