Antenas Allgon

SPRI NG 2006 POWERWAVE PRODUCT GUI DE
ANTENNA SYSTEMS
BASE STATION SYSTEMS
COVERAGE SYSTEMS
Product Guide 06
WHATS NEXT!
06
2
20
ANTENNA SYSTEMS
BASE STATION SYSTEMS
COVERAGE SYSTEMS
SOFTWARE SOLUTIONS
WHAT S NEW I NSI DE THE SPRI NG 06 PRODUCT GUI DE
Coverage Systems
New Outdoor Platform Product
- 1900 MHz OS-3 System
New Repeater Products
- Part Numbers: AL6200 Nano
Repeater and ALS6200 Mini
Repeater
54 Antenna Systems
Updated Section Antenna Brackets
- Updated specifications
New Dual Band ALVC Antenna
- Part number: 7840.00
Base Station Systems
Updated Section Rubix Cabinet
08
44
TABLE OF CONTENTS
08
12
27
28
29
30
31
32
34
35
36
37
38
39
40
41
42
44
46
48
49
Clean Site Single, Dual, & Triple Band Solutions
Single, Dual & Triple Band Antennas
Antenna Brackets
Single/Dual/ Triple Band RET Modules
CILOC Current Injector Layer 1 Converter
MCU Master Control Unit
LOC MCU Layer One Converter Master Control Unit
Tower Mounted Amplifiers
Power Distribution Unit
Current Injectors Indoor and Outdoor
Broadband Diplex Filter
1800/2100 Fullband Diplex Filter
2100 Co-Location 900/1800 Diplex Filter
900/1800/2100 Fullband Triplexer Filter
2100 Co-Location Filter
1900 Fullband Diplex Filter
VersaFlex Enclosure Solutions
Power Amplifier Products
Base Station Filter
Microwave Filter
Antenna Systems
Base Station Systems
50
51
52
54
56
58
64
68
70
72
74
76
78
82
83
84
88
90
92
93
94
Integrated Radio Products
Integrated Power Tranceiver
Digital Radio Head
Multi-Carrier Power Amplifier (MCPA) Products
Indoor MCPA Platform
Outdoor MCPA Platform
Repeater Systems
WCDMA Channel Selective Repeaters
Band Selective Repeaters
Compact Repeaters
Fiber Optic Repeaters
Wideband Coverage System
Wideband Radio Head
Mini Repeater
Nano Repeater
Indoor and Outdoor Systems
Software Systems: NetWay Manager
Education & Training
Service and Warranties
How to Buy
About Powerwave
Coverage Systems
Software Systems
Corporate
Introducing the Powerwave
Whats Next! Truck Tour
WHAT S NEXT!
05
Executive Briefings
New Products/Solutions
Hands-on Demonstrations
Technical Training
Powerwave is crossing North America with a 75-foot semi-trailer to bring you Whats Next! in breakthrough solutions for
wireless communications and providing the inside track on the latest innovations in end-to-end wireless infrastructure solu-
tions. The fully self-contained Whats Next! truck features new products and solutions, hands-on product demonstrations
and advanced technical training that will show you how to:
- Deliver high-value, next generation services
- Generate new, profitable revenue in previously marginal locales
- Deploy ultra-efficient coverage/capacity solutions that reduce CAPEX and OPEX
- Profit from new in-building and campus wireless network concepts
This incredible event on wheels is specifically designed for executives, managers and technical personnel in the fields of
wireless communications infrastructure and operations. Make sure you reserve a date for the Powerwave Whats Next!
Truck Tour with your Powerwave sales representative today!
Powerwave Whats Next! Truck Tour
4
Discover how were powering the next wave of growth in wireless
WHATS NEXT!
6
Powerwave Families
1
2
3
4
5
6
7
8
9
10
11
W
I
R
E
L
E
S
S
I
N
F
R
A
S
T
R
U
C
T
U
R
E
S
O
L
U
T
I
O
N
S
1 Outdoor MCPA Micro Cabinet -
for roof top booster applications
2 Indoor Powerwave Amplifier Frame
(PAF) - MCPA - for high capacity, high
coverage MCPA systems for Indoor
Shelters.
3 Outdoor Cabinet - for high capacity, high
coverage MCPA Systems for Outdoor
applications or sites.
4 Clean Site Antenna System - for easier
zoning.
5 Filters - for interference control.
6 Tower Mounted Amplifiers (TMAs) - for
extended coverage
7 Antennas - Remote Electrical Tilt (RET) -
for dynamic optimization of coverage
8 Antennas - Single / Dual/ Triple - for
cost effective installation
9 Repeaters - for cost effective coverage
expansion
Distributed Antenna Systems (DAS) -
for enhanced/extended indoor cellular
PCS and public safety coverage.
11 NetWay Manager - Network
Management Software for control and
maintenance of Powerwave products.
10
Antenna Systems 08
Base Station Systems 44
Coverage Systems 54
CLEAN SI TE CLEAN SI TE
05
Multi-band Solutions: Antenna / TMA / Filter / RET
Clean Site Single, Dual, & Triple Band System Solutions
ANTENNA
SYSTEMS
8
7720.00 1710-2170-65-15i-A-D 65 15
7721.00 1710-2170-65-18i-A-D 65 18
7721.10 1710-2170-65-18i-A-D 65 18
7722.00 1710-2170-65-19.5i-A-D 65 19.5
7735.00 1710-2170-90-13.5i-A-D 90 13.5
7740.00 1710-2170-90-16.5i-A-D 90 16.5
7745.00 1710-2170-90-18i-A-D 90 18
Antenna Part Number Antenna Description HBW Gain (dBi)
RET Part Number RET Description Voltage Range
TMA Part Number TMA Description Frequency Band Gain (dB)
21504 2100MHz 12 dB gain 1920-2170 12
21504 2100Mhz VG (23-32dB gain) 1920-2170 23-32 (variable)
7010.00 Single system unit AISG 9-30V
Powerwave combines multiple broad/multi-
band antennas, high performance twin
TMAs, Diplex and Triplex Filters under a
single, streamlined radome:
Substantially reduced visual impact
minimizes siting issues (zoning, space
limitations, aesthetics)
Logistics, installations and commis-
sioning are greatly simplified and
reliability is improved dramatically
Antenna performance is guaranteed
Remote Electrical Tilt available
Clean Site solutions assist you with zoning and site issues, provide more capacity with superior coverage and require
less tower space for a lower cost solution.
Clean Site Single system
configured with:
Single Band Antenna (18dBi) + TMA
(variable gain 23-32db) + RET
Single Band System
05
10
7760.00 1710-2170-65-18i-A-D 65/65 18/18
7765.00 1710-2170-65-19.5i-A-D 65/65 19.5/19.5
7766.00 1710-2170-90-18i-A-D 90/90 18/18
7762.00 1710-2170-90-16.5i-A-D 90/90 16.5/16.5
7750.00 824-960/1710-2170-65-15/18i-A-D 67/65 14.5/18
7752.00 824-960/1710-2170-65-16.5/18i-A-D 67/65 15.5/18
7755.00 824-960/1710-2170-65-18/18i-A-D 67/65 17.5/18
RET Part Number RET Description Voltage range
21504 2100MHz 12dB gain 1920-2170 12
21504 2100MHz VG (23-32) dB gain 1920-2170 23-32 (variable)
Filter Part Number Filter Description Frequency Band DC path
21901 800-900/1800-2100 X 824-960/1720-2170 No DC path
21902 800-900/1800-2100 D 824-960/1710-2170 824-960/1710-2170
21903 800-900/1800-2100 SH 824-960/1710-2170 1710-2170
21904 800-900/1800-2100 SL 824-960/1710-2170 824-960
23201 1800/UMTS SH 1710-1880/1920-2170 1920-2170
23202 1800/UMTS SL 1710-1880/1920-2170 1710-1880
23203 1800/UMTS D 1710-1880/1920-2170 1710-1880/1920-2170
23204 800/UMTS X 1710-1880/1920-2170 No DC path
7020.00 Dual system unit 9-30 V
7780.00 824-960/2x1710-2170-15i-A-D 69/65/62 14.5/15/15
7782.00 824-960/2x1710-2170-17i-A-D 69/65/62 16.5/17/17
7785.00 824-960/2x1710-2170-18i-A-D 69/65/62 17/17.5/15.5
RET Part Number RET Description Voltage range
21504 2100MHz 12dB gain 1920-2170 12
21504 2100MHz VG (23-32) dB gain 1920-2170 23-32 (variable)
Filter Part Number Filter Description Frequency Band DC path
21901 800-900/1800-2100 X 824-960/1710-2170 No DC path
21902 800-900/1800-2100 D 824-960/1710-2170 824-960/1710-2170
21903 800-900/1800-2100 SH 824-960/1710-2170 1710-2170
21904 800-900/1800-2100 SL 824-960/1710-2170 824-960
23201 1800/UMTS SH 1710-1880/1920-2170 1920-2170
23202 1800/UMTS SL 1710-1880/1920-2170 1710-1880
23203 1800/UMTS D 1710-1880/1920-2170 1710-1880/1920-2170
23204 1800/UMTS X 1710-1880/1920-2170 No DC path
14108 900/1800 SMH 824-960/1710-1880/1920-2170 1710-1880
14109 900/1800 SSH 824-960/1710-1880/1920-2170 1920-2170
14110 900/1800 SLH 824-960/1710-1880/1920-2170 824-960
7030.00 Triple system unit 9-30 V
Clean Site Triple System
configured with:
Triple Band Antenna (15dBi) +
TMA (12dB) + 3xRET (AISG)
+ 2xTriplex filter
Clean Site Dual System
configured with:
Dual Band Antenna (15.5/18dBi) +
TMA (12dB) + 2 x RET (AISG)
Triple Band System Dual Band System
BROADBAND ANTENNAS
Broadband Cross Polarized
ANTENNAS
05
Key Benefits:
Market Leading Performance
Reliable Design
Light Weight
Multi-band Solutions
Single, Dual, and Triple Band Antennas
ANTENNA
SYSTEMS
12
806-960 7471.00 15 (12.9) 2-12.0 65 1.4 2 Low Broadband
806-960 7472.00 16.5 (14.4) 0-7.5 65 2.0 2 Low Broadband
806-960 7473.00 18 (15.9) 0-5.5 65 2.6 2 Low Broadband
806-960 7476.00 15 (12.9) 0 65 1.4 2 Low Broadband
806-960 7476.02 15 (12.9) 2 65 1.4 2 Low Broadband
806-960 7476.06 15 (12.9) 6 65 1.4 2 Low Broadband
806-960 7477.00 16.5 (14.4) 0 65 2.0 2 Low Broadband
806-960 7477.02 16.5 (14.4) 2 65 2.0 2 Low Broadband
806-960 7477.06 16.5 (14.4) 6 65 2.0 2 Low Broadband
806-960 7478.00 18 (15.9) 0 65 2.6 2 Low Broadband
806-960 7478.02 18 (15.9) 2 65 2.6 2 Low Broadband
806-960 7478.06 18 (15.9) 6 65 2.6 2 Low Broadband
806-960 7481.00 13.5 (11.4) 2-12 90 1.4 2 Low Broadband
806-960 7482.00 15 (12.9) 0-7.5 90 2.0 2 Low Broadband
806-960 7483.00 16.5 (14.4) 0-5.5 90 2.6 2 Low Broadband
Range Part Gain Electrical HBW Length Number Family
MHz Number dBi (dBd) Downtilt (m) of Ports
8
0
0
/
9
0
0
M
H
z
BROADBAND ANTENNAS BROADBAND ANTENNAS
ANTENNA
SYSTEMS
14
806-960 7486.00 13.5 (11.4) 0 90 1.4 2 Low Broadband
806-960 7486.02 13.5 (11.4) 2 90 1.4 2 Low Broadband
806-960 7486.06 13.5 (11.4) 6 90 1.4 2 Low Broadband
806-960 7487.00 15 (12.9) 0 90 2.0 2 Low Broadband
806-960 7487.02 15 (12.9) 2 90 2.0 2 Low Broadband
806-960 7487.06 15 (12.9) 6 90 2.0 2 Low Broadband
806-960 7488.00 16.5 (14.4) 0 90 2.6 2 Low Broadband
806-960 7488.02 16.5 (14.4) 2 90 2.6 2 Low Broadband
806-960 7488.06 16.5 (14.4) 6 90 2.6 2 Low Broadband
1710-2170 7700.00 15.5 (13.4) 0 65 0.7 2 High Broadband
1710-2170 7700.06 15.5 (13.4) 6 65 0.7 2 High Broadband
1710-2170 7701.00 18 (15.9) 0 65 1.4 2 High Broadband
1710-2170 7701.02 18 (15.9) 2 65 1.4 2 High Broadband
1710-2170 7701.06 18 (15.9) 6 65 1.4 2 High Broadband
1710-2170 7720.00 15 (12.9) 0-16 65 0.7 2 High Broadband
1710-2170 7721.00 18 (15.9) 0-8 65 1.4 2 High Broadband
1710-2170 7721.10 18 (15.9) 2-10 65 1.4 2 High Broadband
1710-2170 7722.00 19.5 (17.4) 0-5.5 65 2.0 2 High Broadband
1710-2170 7735.00A 13.5 (11.4) 0-16 90 0.7 2 High Broadband
1710-2170 7740.00A 16.5 (14.4) 0-8 90 1.4 2 High Broadband
1710-2170 7745.00A 18 (15.9) 0-5.5 90 2.0 2 High Broadband
824-960/1710-2170 7750.00 14/17.5 (11.9/15.4) 2-12/0-8 65 1.4 4 Dual Broadband
824-960/1710-2170 7752.00 14/17.5 (11.9/15.4) 2-12/0-8 65 1.2 4 Dual Broadband
824-960/1710-2170 7755.00 14/17.5 (11.9/15.4) 2-12/0-8 65 2.6 4 Dual Broadband
1710-2170 7760.00 17.5/18/18.5 (15.4/15.9/16.4) 0-8 65 1.4 4 Dual High Broadband
1710-2170 7762.00 16.3/16.5/16.7 (14.2/14.4/14.6) 0-8 90 1.4 4 Dual High Broadband
1710-2170 7765.00 18.8/19.2/19.7 (16.7/17.1/17.6) 0-5.5 65 2.0 4 Dual High Broadband
800/1900 7770.00 13.5/16.5 (11.4/14.4) 0-10/0-8 90 1.4 4 Dual Broadband
800/1900 7772.00 15/16.5 (12.9/14.4) 0-10/0-8 90 2.0 4 Dual Broadband
800/1900 7775.00 16.5/16.5 (14.4/14.4) 0-6/0-8 90 2.6 4 Dual Broadband
824-960/2*1710-2170 7780.00 14.5/14.4/14.8 (12.4/12.3/12.7) 2-12/0-12/0-12 65 1.4 6 Triple Broadband
SI NGLE BAND ANTENNAS SI NGLE BAND ANTENNAS
ANTENNA
SYSTEMS
16
Single Band Vertical Polarized
870-960 4168.11.33.00 11 (8.9) 0 360 3.0 1 Omni
870-960 4168.11.33.02 11 (8.9) 2 360 3.0 1 Omni
870-960 4168.11.33.03 11 (8.9) 3 360 3.0 1 Omni
870-960 4168.11.33.06 11 (8.9) 6 360 3.0 1 Omni
870-960 4168.11.33.52 11 (8.9) 2 360 3.0 1 Omni
806-896 4168.21.33.00 11 (8.9) 0 360 3.0 1 Omni
806-896 4168.21.33.03 11 (8.9) 3 360 3.0 1 Omni
806-960 7143.16.33.00 17 (14.9) 0 60 1.8 1 City
806-960 7143.24.33.00 15.5 (13.4) 0 60 1.2 1 City
806-960 7143.24.33.06 15.5 (13.4) 6 60 1.2 1 City
806-960 7143.24.33.50 15 (12.9) 0-16 60 1.2 1 City
806-960 7143.26.33.00 17 (14.9) 0 60 1.8 1 City
806-960 7143.26.33.06 17 (14.9) 6 60 1.8 1 City
806-960 7143.26.33.08 17 (14.9) 8 60 1.8 1 City
806-960 7143.48.33.00 18 (15.9) 0 60 2.3 1 City
806-960 7143.48.33.02 18 (15.9) 2 60 2.3 1 City
806-960 7143.48.33.05 18 (15.9) 5 60 2.3 1 City
8
0
0
/
1
9
0
0
M
H
z
806-960 7144.24.33.00 14 (11.9) 0 90 1.2 1 City
806-960 7144.24.33.50 13.5 (11.4) 0-16 90 1.2 1 City
806-960 7144.26.33.00 15 (12.9) 0 90 1.8 1 City
806-960 7144.48.33.00 16.5 (14.4) 0 90 2.3 1 City
806-960 7144.48.33.05 16.5 (14.4) 5 90 2.3 1 City
806-960 7145.24.33.00 13.5 (11.4) 0 105 1.2 1 City
806-960 7145.24.33.50 13 (10.9) 0-16 105 1.2 1 City
806-960 7145.26.33.00 14.5 (12.4) 0 105 1.8 1 City
806-960 7145.48.33.00 16 (13.9) 0 105 2.3 1 City
1850-1990 7182.40 18 (15.9) 0 65 1.3 1 Metro
1850-1990 7182.42 18 (15.9) 2 65 1.3 1 Metro
1850-1990 7182.44 18 (15.9) 4 65 1.3 1 Metro
1850-1990 7182.46 18 (15.9) 6 65 1.3 1 Metro
1850-1990 7182.66 18 (15.9) 2 65 1.3 1 Metro
1850-1990 7183.42 17 (14.9) 2 65 1.0 1 Metro
1850-1990 7183.46 17 (14.9) 6 65 1.0 1 Metro
1850-1990 7184.40 16.5 (14.4) 0 90 1.3 1 Metro
1850-1990 7184.42 16.5 (14.4) 2 90 1.3 1 Metro
1850-1990 7184.44 16.5 (14.4) 4 90 1.3 1 Metro
1850-1990 7185.40 20 (17.9) 0 30 1.0 1 Metro
1850-1990 7185.42 20 (17.9) 2 30 1.0 1 Metro
1850-1990 7185.44 20 (17.9) 4 30 1 Metro
1850-1990 7194.40 13.5 (11.4) 0 90 0.6 1 Metro
1850-1990 7195.44 15 (12.9) 4 65 0.6 1 Metro
ANTENNA
SYSTEMS
18
9
0
0
M
H
z
870-960 7230.04 12 (9.9) 0 90 0.7 1 Urban
870-960 7231.04 14 (11.9) 0 90 1.3 1 Urban
870-960 7231.06 14 (11.9) 6 90 1.3 1 Urban
870-960 7232.04 15 (12.9) 0 90 2.0 1 Urban
870-960 7232.07 15 (12.9) 4 90 2.0 1 Urban
870-960 7233.04 16.5 (14.4) 0 90 2.5 1 Urban
870-960 7233.06 16.5 (14.4) 6 90 2.5 1 Urban
870-960 7233.08 16.5 (14.4) 2 90 2.5 1 Urban
806-896 7270.02 12.5 (10.4) 0 65 0.6 1 Urban
806-896 7271.02 15.5 (13.4) 0 65 1.3 1 Urban
806-896 7271.03 15 (12.9) 5 65 1.3 1 Urban
806-896 7272.02 17 (14.9) 0 65 2.0 1 Urban
806-896 7273.02 18 (15.9) 0 65 2.5 1 Urban
806-896 7273.03 17.5 (15.4) 4 65 2.5 1 Urban
806-896 7275.02 11.5 (9.4) 0 90 0.7 1 Urban
806-896 7276.02 14 (11.9) 0 90 1.3 1 Urban
806-896 7277.02 15 (12.9) 0 90 2.0 1 Urban
806-896 7278.02 16 (13.9) 0 90 2.5 1 Urban
806-896 7804.00 17 (14.9) 0 35 1.3 1 ALP
806-960 7824.00 15 (12.9) 0 80 1.3 1 ALP
806-960 7834.00 14 (11.9) 0 90 1.3 1 ALP
806-960 7838.00 16 (13.9) 0 90 2.6 1 ALP
1850-1990 7198.40 15.5 (13.4) 0 90 1.0 1 Metro
1850-1990 7199.40 19.5 (17.4) 0 90 2.6 1 Metro
1850-1990 7199.42 19.5 (17.4) 2 90 2.6 1 Metro
1850-1990 7200.40 18 (15.9) 0 90 1.8 1 Metro
1850-1990 7200.42 18 (15.9) 2 90 1.8 1 Metro
1850-1990 7200.43 18 (15.9) 3 90 1.8 1 Metro
1850-1990 7200.44 18 (15.9) 4 90 1.8 1 Metro
1850-1990 7200.46 18 (15.9) 6 90 1.8 1 Metro
1850-1990 7220.40 20 (17.9) 0 65 1.8 1 Metro
1850-1990 7220.42 20 (17.9) 2 65 1.8 1 Metro
1850-1990 7220.44 20 (17.9) 4 65 1.8 1 Metro
1850-1990 7221.40 23 (20.9) 0 30 2.0 1 Metro
1850-1990 7221.42 23 (20.9) 2 30 2.0 1 Metro
1850-1990 7221.44 23 (20.9) 4 30 2.0 1 Metro
870-960 7225.04 13 (10.9) 0 65 0.6 1 Urban
870-960 7226.03 15.5 (13.4) 6 65 1.3 1 Urban
870-960 7226.04 15.5 (13.4) 0 65 1.3 1 Urban
870-960 7227.04 17 (14.9) 0 65 2.0 1 Urban
870-960 7228.03 18 (15.9) 0 65 2.5 1 Urban
870-960 7228.04 18 (15.9) 0 65 2.5 1 Urban
870-960 7228.06 17.5 (15.4) 6 65 2.5 1 Urban
870-960 7228.08 18 (15.9) 2 65 2.5 1 Urban
ANTENNA
SYSTEMS
20
Single Band Cross Polarized
8
0
0
/
9
0
0
M
H
z
806-896 7281.04 16.5 (14.4) 6 65 2.0 2 XUrban
806-896 7282.03 12.5 (10.4) 4 65 0.6 2 XUrban
806-896 7390.00 10.5 (8.4) 0 90 0.7 2 AL Antennas
806-960 7471.00 15 (12.9) 2-12.0 65 1.4 2 Low Broadband
806-960 7472.00 16.5 (14.4) 0-7.5 65 2.0 2 Low Broadband
806-960 7473.00 18 (15.9) 0-5.5 65 2.6 2 Low Broadband
806-960 7476.00 15 (12.9) 0 65 1.4 2 Low Broadband
806-960 7476.02 15 (12.9) 2 65 1.4 2 Low Broadband
806-960 7476.06 15 (12.9) 6 65 1.4 2 Low Broadband
806-960 7477.00 16.5 (14.4) 0 65 2.0 2 Low Broadband
806-960 7477.02 16.5 (14.4) 2 65 2.0 2 Low Broadband
806-960 7477.06 16.5 (14.4) 6 65 2.0 2 Low Broadband
806-960 7478.00 18 (15.9) 0 65 2.6 2 Low Broadband
806-960 7478.02 18 (15.9) 2 65 2.6 2 Low Broadband
806-960 7478.06 18 (15.9) 6 65 2.6 2 Low Broadband
806-960 7481.00 13.5 (11.4) 2-12 90 1.4 2 Low Broadband
806-960 7482.00 15 (12.9) 0-7.5 90 2.0 2 Low Broadband
806-960 7483.00 16.5 (14.4) 0-5.5 90 2.6 2 Low Broadband
806-960 7486.00 13.5 (11.4) 0 90 1.4 2 Low Broadband
806-960 7486.02 13.5 (11.4) 2 90 1.4 2 Low Broadband
806-960 7486.06 13.5 (11.4) 6 90 1.4 2 Low Broadband
806-960 7487.00 15 (12.9) 0 90 2.0 2 Low Broadband
870-960 7216.03 12.5 (10.4) 0 65 0.6 2 XUrban
870-960 7217.03 15 (12.9) 7 65 1.3 2 XUrban
870-960 7217.04 15.5 (13.4) 0 65 1.3 2 XUrban
870-960 7217.11 14.5 (12.4) 9 65 1.3 2 XUrban
870-960 7218.03 17.5 (15.4) 6 65 2.5 2 XUrban
870-960 7218.04 17.5 (15.4) 4 65 2.5 2 XUrban
870-960 7218.05 18 (15.9) 0 65 2.5 2 XUrban
870-960 7218.09 18 (15.9) 2 65 2.5 2 XUrban
870-960 7218.13 17.5 (15.4) 6 65 2.5 2 XUrban
870-960 7218.14 17.5 (15.4) 4 65 2.5 2 XUrban
870-960 7218.15 18 (15.9) 0 65 2.5 2 XUrban
870-960 7218.19 18 (15.9) 2 65 2.5 2 XUrban
870-960 7255.03 16.5 (14.4) 6 65 2.0 2 XUrban
870-960 7255.04 17 (14.9) 0 65 2.0 2 XUrban
806-896 7263.01 15 (12.9) 0 65 1.3 2 XUrban
806-896 7263.04 14.5 (12.4) 6 65 1.3 2 XUrban
806-896 7281.02 16.5 (14.4) 0 65 2.0 2 XUrban
DUAL BAND ANTENNAS
Dual Band Vertical Polarized
SI NGLE BAND ANTENNAS
ANTENNA
SYSTEMS
22
806-896/1850-1990 7332.00 14/17 (11.9/14.9) 0 80 1.3 1 AL Antennas
806-896/1850-1990 7332.06 14/17 (11.9/14.9) 6 80 1.3 1 AL Antennas
806-896/1850-1990 7333.00 14.5/17.5 (12.4/15.4) 0 70 1.3 1 AL Antennas
806-896/1850-1990 7333.06 14.5/17.5 (12.4/15.4) 6 70 1.3 1 AL Antennas
806-896/1850-1990 7334.00 13.5/16.5 (11.4/14.4) 0 90 1.3 1 AL Antennas
806-896/1850-1990 7334.06 13.5/16.5 (11.4/14.4) 6 90 1.3 1 AL Antennas
806-896/1850-1990 7337.00 12/15 (9.9/12.9) 0 70 0.7 1 AL Antennas
806-896/1850-1990 7338.00 11.5/14.5 (9.4/12.4) 0 80 0.7 1 AL Antennas
806-896/1850-1990 7339.00 11/14 (8.9/11.9) 0 90 0.7 1 AL Antennas
806-896/1850-1990 7840.00 14.5/17.5(12.4/15.4) 0-10/0-8 65 1.3 2 AL Antennas
806-896/1850-1990 7850.00 13.5/16 (11.4/13.9) 0-10/0-8 90 1.3 2 AL Antennas
8
0
0
/
1
9
0
0
M
H
z
806-960 7487.02 15 (12.9) 2 90 2.0 2 Low Broadband
806-960 7487.06 15 (12.9) 6 90 2.0 2 Low Broadband
806-960 7488.00 16.5 (14.4) 0 90 2.6 2 Low Broadband
806-960 7488.02 16.5 (14.4) 2 90 2.6 2 Low Broadband
806-960 7488.06 16.5 (14.4) 6 90 2.6 2 Low Broadband
1710-2170 7700.00 15.5 (13.4) 0 65 0.7 2 High Broadband
1710-2170 7700.06 15.5 (13.4) 6 65 0.7 2 High Broadband
1710-2170 7701.00 18 (15.9) 0 65 1.4 2 High Broadband
1710-2170 7701.02 18 (15.9) 2 65 1.4 2 High Broadband
1710-2170 7701.06 18 (15.9) 6 65 1.4 2 High Broadband
1710-2170 7720.00 15 (12.9) 0-16 65 0.7 2 High Broadband
1710-2170 7721.00 18 (15.9) 0-8 65 1.4 2 High Broadband
1710-2170 7722.00 19.5 (17.4) 0-5.5 65 2.0 2 High Broadband
1710-2170 7735.00A 13.5 (11.4) 0-16 90 0.7 2 High Broadband
1710-2170 7740.00A 16.5 (14.4) 0-8 90 1.4 2 High Broadband
1710-2170 7745.00A 18 (15.9) 0-5.5 90 2.0 2 High Broadband
TRI PLE BAND ANTENNAS DUAL BAND ANTENNAS
ANTENNA
SYSTEMS
24
Dual Band Cross Polarized
870-960/1710-1880 7329.00 15/15 (12.9/12.9) 0 65 1.4 4 AL Antennas
870-960/1710-1880 7330.00 15.5/17.5 (13.4/15.4) 0 65 1.4 4 AL Antennas
870-960/1710-1880 7330.02 15.5/17.5 (13.4/15.4) 2 65 1.4 4 AL Antennas
870-960/1710-1880 7330.04 15.5/17.5 (13.4/15.4) 4 65 1.4 4 AL Antennas
870-960/1710-1880 7330.06 15.5/17.5 (13.4/15.4) 6 65 1.4 4 AL Antennas
870-960/1710-1880 7331.00 16.5/16 (14.4/13.9) 0 65 2.0 4 AL Antennas
870-960/1710-1880 7331.02 16.5/16 (14.4/13.9) 2 65 2.0 4 AL Antennas
870-960/1710-1880 7331.04 16.5/16 (14.4/13.9) 4 65 2.0 4 AL Antennas
870-960/1710-1880 7331.06 16.5/16 (14.4/13.9) 6 65 2.0 4 AL Antennas
824-960/1710-2170 7750.00 14/17.5 (12.1/15.4) 2-12/0-8 65 1.4 4 Dual Broadband
824-960/1710-2170 7752.00 15.9/17.5 (13.8/15.24) 2-9/0-8 65 2.0 4 Dual Broadband
824-960/1710-2170 7755.00 17.5/17.5 (15.4/15.4) 2-8/0-8 65 2.6 4 Dual Broadband
1710-2170 7760.00 17.5/18.5 (15.4/16.4) 0-8 65 1.3 4 Dual High Broadband
1710-2170 7762.00 16.3/16.5/16.7 (14.2/14.4/14.6) 0-8 90 1.3 4 Dual High Broadband
870-960/1710-1880 7770.00 13.5/16.5 (11.4/14.4) 0-10/0-8 90 1.4 4 Dual Broadband
870-960/1710-1880 7772.00 15/16.5 (12.9/14.4) 0-8/0-8 90 2.0 4 Dual Broadband
Triple Band Cross Polarized
*
*Referred to in the US as Dual Band Hex Pole Antenna
BRACKETS
Antenna Brackets
ANTENNA
SYSTEMS
26
I NDOOR ANTENNAS
Indoor
800/2500 7336.00 3 (0.9) 0 360 18 cm (dm) Indoor
800/2500 7336.10 6/9 (3.9/6.9) 0 90/60 21 Indoor
800/1900 7999.00 9/9 (6.9/6.9) 0 70/60 21.6 cm Indoor
Range Part Gain Electrical HBW Length Family
MHz Number dBi (dBd) Downtilt (m)
8
0
0
/
2
5
0
0
M
H
z
Rugged brackets with aesthetic design and the flexibility to address multiple situations and requirements.
Powerwave Antenna Brackets accom-
modate several models that are easy
to install and are ideal for stealth
installations:
Precise alignment of sector
boundaries, reducing sector
overlap and interference.
Use with any length antenna
Can be used with standard tilt
brackets included on antennas
Can mount with or without
mechanical tilt
Triple Mount Brackets
Part Number 7454.00
2201.11 Yes <1.5 meters/5 feet
2210.10 Yes 1.5 meters/5 feet
7256.00 Yes 1.5 meters/5 feet
7454.00 Yes (370mm/14.5 inches)
7455.00 No <1.5 meters/5 feet
7456.00A Yes <1.5 meters/5 feet
7458.00 No <1.5 meters/5 feet
Part Number Down-Tilt Antenna Length (Width)
RET
28
RET
Single/Dual/Triple Band RET Modules
ANTENNA
SYSTEMS
Current Injector Layer One Converter (CILOC)
Power control and cell breathing by
varying antenna coverage footprints
Fine tuning of soft and softer hand-
off with live traffic for a better capac-
ity solution
Real-time adaptation to
changes in capacity needs (e.g.,
during rush hour)
Remote re-configuration when
changing network plans or
expanding existing networks
AISG compliant
7010.00 +9 to+30V < 500 mA at Vin <10V < 100 mA at Vin <19V SB RET
7011.00 +9 to+30V < 400 mA at Vin <19V < 50 mA at Vin >19V SB RET Ericsson compliant
7012.00 +9 to+30V < 250 mA at Vin >19V SB RET Siemens compliant
7031.00 +9 to+30V (same as above) (same as above) MB RET Ericsson compliant
7032.00 +9 to+30V (same as above) (same as above) MB RET
7033.00 +9 to+30V (same as above) (same as above) MB RET Siemens compliant
7020.00 +9 to+30V (same as above) (same as above) DB RET
7030.00 +9 to+30V (same as above) (same as above) TB RET
Part Number Power Supply Current Draw All Other Operational States Type
Single Band RET
806-960/1710-2170 >20 <0.2 CILOC Current Injector 7060.10
Layer 1 Converter (BTS)
806-960/1710-2170 >20 <0.2 CILOC Current Injector 7060.00
Layer 1 Converter (ANT)
Range Return loss Insertion Loss Type Part Number
MHz (dB) (dB)
Connects a RET module to an MCU using an ordinary RF feeder.
CILOC transfer TMA DC supply and
data signals to the antenna line device
(ALD), enabling Remote Electrical Tilt
of antennas:
Field proven vented reliable design
Extremely low insertion loss
Integrated lightning protection CILOC
Remote Electrical Tilt provides faster, easier and more flexible optimization of network coverage at a lower cost.
LOC MCU
Layer One Converter Master Control Unit (LOC MCU)
MCU
05
MCU Master Control Unit
ANTENNA
SYSTEMS
30
Simplifies operations by enabling remote electrical tilting of antennas and setting of TMA gain via Web or SNMP interfaces.
AC 115/230 VAC <1.7A/1.0A +24V LOC Layer One Converter MCU 7072.10
DC +24V < 5.0A +24V LOC Layer One Converter MCU 7072.30
DC -48V < 2.5A +24V LOC Layer One Converter MCU 7072.50
Power Supply Voltage/Current Consumption ALD Supply Voltage Type Part Number
The Powerwave MCU controls the ALDs
and supplies DC power via a common
bus. The MCU can be controlled locally
or from an Operation & Maintenance
Center (OMC) site LAN, Web, text ter-
minal or Telnet client.
User friendly interface for configura-
tion and tuning of Antenna Line
Devices (ALDs)
Remote configurable via web
interface
The Powerwave LOC MCU controls the
ALDs and supplies DC power via a
common bus. The LOC MCU can be
controlled locally or from an Operation
& Maintenance Center (OMC) site LAN,
Web, text terminal or Telnet client.
Same Functionality as the MCU with
built-in layer one conversion which
enables the use of standard current
injectors for RF feeder injection of
sub carrier Signal
Two Ethernet ports: one for local
control by computer, one for remote
control through your network
RS-232 port for serial communication
Eight alarm input ports for surveil-
lance of external Equipment
Two configurable external alarm
output ports for connection to
existing OMC alarm panel
Integrated SNMP agent
Compatible with Powerwave NWM
for advanced network management
Master Control
Unit (MCU)
AC 115/230 VAC <1.7A/1.0A +24V MCU Master Control Unit 7070.10
DC +24V <5.0A +24V MCU Master Control Unit 7070.30
DC -48V < 2.5A +24V MCU Master Control Unit 7070.50
Power Supply Voltage/Current Consumption ALD Supply Voltage Type Part Number
Simplifies operations by enabling remote electrical tilting of antennas and setting of TMA gain via Web or SNMP interfaces.
Layer One Converter
Master Control Unit
(LOC MCU)
TMA TMA
05
Tower Mounted Amplifiers
ANTENNA
SYSTEMS
32
LGP 174nn 824-849 869-894 12 1.7 0.4 SMR Reject
LGP 214nn 824-849/1850-1910 869-894/1930-1990 12 1.7 0.3/0.5 800 Bypass
LGP 102nn 824-849 869-894 12 1.7 0.35 Fullband TMA
LGP 104nn 890-915 935-960 12 1.7 0.35 Fullband TMA
LGP 167nn 1920-1980 2110-2170 12 or 23-32 1.4 0.3 Twin TMA
LGP 172nn 824-849/1850-1910 869-894/1930-1990 12 1.7 0.4/0.5 Dual Band TMA
LGP 185nn 1710-1785 1805-1880 12 1.5 0.4 Twin TMA
LGP 186nn 1850-1910 1930-1990 12 1.5 0.4 Twin TMA
LGP 192nn 880-915 925-960 12 1.7 0.7 EGSM TMA
LGP 215nn 1920-1980 2110-2170 12 1.4 0.3 Micro Twin TMA
Part Number Up-link Down-link Gain Noise TX insertion Type
Range MHz Range MHz (dB) Figure (dB) loss (dB)
Tower Mounted Amplifiers maximize uplink coverage and capacity at the base station and provide a cost-effective
solution for meeting the increased demands of 3G services.
World class field-proven reliability
Cutting edge compact design
Twin technology offering two TMAs
in one housing
World class noise figure
Easy to install (brackets included)
Powerwave is the worldwide leader in
Tower Mounted Amplifiers with the most
extensive line of single-, twin-, and dual-
band TMAs and over 800,000 TMAs
deployed worldwide:
2100 MHz Micro Twin
Tower Mounted Amplifier
Part Number LGP215nn
Note: ByPass functions are available on all TMAs except 23-32 dB 167nn
CI N PDU
05
Power Distribution Unit
ANTENNA
SYSTEMS
34
Modular design enables TMA installations to be carried out on a per-sector basis. Can be
easily combined to provide solutions for all common site configurations.
Operates from +24 or -48 VDC
Compact design for cramped BTS
cabinets
Available as stand alone unit or as 1
to 3 modules for 19 panel
Easy upgrade for BTS expansion
Current Injectors - Indoor and Outdoor
Indoor Current Injector
824-960 or 1710-2170 MHz
Outdoor Current Injector
824-960 or 1710-1990 MHz
Powerwave makes two Current Injector
models, one for indoor and one for out-
door installation, to apply power to and
convey alarm conditions from Tower
Mounted Amplifiers:
Advanced lightning protection circuits
acting as surge protection for the BTS
Negligible insertion loss
Indoor: 800/900 MHz or
1800/1900/2100 MHz systems
Outdoor 806-960 MHz or 1710-1990
MHz systems
Connector configuration is male to
the BTS port and female to the
antenna port (swapped gender con-
figuration also available)
Robust design
Integrated lightning protection on Powerwave Current Injectors eliminates need for
traditional lightning arresters, saving space and cost.
LGP138nn 806-960/1710-1990 Female/Male >25 <0.1 Outdoor

LGP21301/LGP21302 806-960 and 1710-2170 Female/Male >20 <0.1 Outdoor
LGP23301/LGP23302 806-960 and 1710-2170 Female/Male >20 <0.1 Indoor
Part Number Range MHz Antenna Connector Return Loss (dB) Insertion Loss (dB) Type
PDU Lite Indoor
LGP12101 20-60 V DC, positive or negative 12 V DC +/- 1 V 1A 375 mA/port Wallmount for 2 TMAs
LGP12102 (same as above) (same as above) (same as above) (same as above) 19 for 2 TMAs
Part Number Input Voltage Output Voltage Input Current Max Output Current Max Type
The Powerwave Power Distribution Unit
(PDU Lite) supplies power to the
TMA via the CIN and is intended for
indoor use:
1800/2100 Fullband Diplex Filter
The Powerwave Diplexer 1800/2100
combines GSM 1800 and UMTS 2100
signals to a common feeder and is
designed for both outdoor and indoor
installation:
Outdoor Design
Built in DC Transparency and
AISG/3GPP compatible
World Leading Compact Design
Superior Power Handling
Negligible Insertion Loss
Full Band Design
Lightning Protected
FI LTERS FI LTERS
ANTENNA
SYSTEMS
36
1710-1880 / 1920-2170 LGP14501 >18 <0.6/<0.3 (TX) 2100 to common
(same as above) LGP14502 (same as above) (same as above) 1800 to common
(same as above) LGP14503 (same as above) (same as above) All ports
(same as above) LGP14504 (same as above) (same as above) No
Range MHz Part Number Return Loss (dB) Insertion Loss (dB) DC Transparency
Fullband Diplex Filter
1800/2100 MHz
05
Powerwave supplies a robust line of
Diplex Filters for 800/900 MHz and
1800/1900/2100 MHz with DC trans-
parency:
Different DC path options are avail-
able to support single or dual band
TMA solutions
Broadband Design
Outdoor Design
Compact Design
Lightning Protected
824-960/1710-2170 LGP21901/LGP21905 Single/Double No >20 <0.1/ <0.2
(same as above) LGP21902/LGP21906 Single/Double All ports (same as above) (same as above)
(same as above) LGP21903/LGP21907 Single/Double 1710-2170 port to common (same as above) (same as above)
(same as above) LGP21904/LGP21908 Single/Double 824-960 port to common (same as above) (same as above)
Range MHz Part Number Configuration DC Transparency Return Loss (dB) Insertion Loss (dB)
Diplex Filter
824-960/1710-2170 MHz
Broadband Diplex Filter
Reduces installation and capital costs through co-location of base stations to enable sharing
of the feeder, TMA system and antenna.
Re-uses existing feeders to reduce cost of new installations and simplify site permission process for the new installations.
FI LTERS
ANTENNA
SYSTEMS
900/1800/2100 Fullband Triplex Filter
Powerwave offers a number of Triplex
filters for 900, 1800 MHz and 2100 MHz
with configurable DC transparency and
integrated lightning protection on all
ports, making it easy to use TMAs &
RET in the antenna system:
Outdoor Design
Built in DC Transparency
and AISG/3GPP compatible
Fullband Design
Lightning Protected
FI LTERS
38
880-960 / 1710-1880 / 1920-2170 LGP14106 >20 <0.2 / <0.3 / <0.6 No
(same as above) LGP14107 (same as above) (same as above) All Ports
(same as above) LGP14108 (same as above) (same as above) 1800 & 2100 to common
(same as above) LGP14109 (same as above) (same as above) 2100 to common
(same as above) LGP14110 (same as above) (same as above) 900 & 2100 to common
Range MHz Part Number Return Loss (dB) Insertion Loss (dB) DC Transparency
Triplex Filter
900/1800/2100 MHz
05
2100 Co-Location 900/1800 Diplex Filter
Outdoor Design
Full Band Design
Lightning Protected
880-960 / 1710-1880 LGP14401 >20 <0.2 / <0.4 >64/ >44 1800 to common
(same as above) LGP14402 (same as above) (same as above) (same as above) 900 to common
(same as above) LGP14403 (same as above) (same as above) (same as above) All ports
(same as above) LGP14404 (same as above) (same as above) (same as above) No
Diplex Filter
900/1800 with 2100 rejection
Range MHz Part Number Return Loss (dB) Insertion Loss (dB) 2100 Rejection (dB) DC Transparency
The Powerwave Diplexer 900/1800 with
2100 rejection is used to combine GSM
900 and GSM 1800 signals to a com-
mon feeder and is designed for both
outdoor and indoor installation:
Suppresses wide band noise/spurious signals between GSM and UMTS systems and enables
the use of TMA and RET in the antenna system.
Re-uses existing feeders to reduce cost of new installations and simplify site permission process for the new installations.
FI LTERS FI LTERS
05
ANTENNA
SYSTEMS
40
Protects GSM 900 base station from strong nearby 800 MHz base stations. Available in
three versions to satisfy different carrier allocations.
The Powerwave Co-Location Filter for
GSM900 provides attenuation of 800
MHz transmitters to prevent degradation
of the GSM900 uplink:
Duplexed Design for
Uplink/Downlink
Compact Design
Low Insertion Loss
Lightning Protected
890-960 or 896-960 LGP195nn >20 <1.0/<0.5 37
Range Part Number Return Loss Insertion Loss Rejection
MHz (dB) (dB) (dB)
Co-Location Filter
900 MHz The primary application of the
Powerwave Co-Location Filter is
to reject nearby GSM base station
spurious and wide band noise in
the 2100 MHz band.
Outdoor Design
Built in DC Transparency
and AISG/3GPP compatible
Compact Design
Negligible RF Loss
Lightning Protected
Restores coverage reduced
by an elevated noise floor
on uplink
Band Pass Filter
900/1800 MHz
with 2100 rejection
Suppresses wide band noise/spurious signals from GSM systems into the UMTS receiver band
and enables the use of TMA and RET in the antenna system.
880-960/1710-1880 LGP164nn >18 <0.2/<0.5 >60
Range Part Number Return Loss Insertion Loss 2100 Rejection
MHz (dB) (dB) (dB)

A
N
T
E
N
N
A
S
FI LTERS
05
1900 Fullband Duplex Filter
ANTENNA
SYSTEMS
42
1850-1910/1930-1990 LGP14601 >18 <0.6 / <0.5
Provides DC bypass between the RX port and the common port to enable the use of TMAs in
the antenna system, driven and supported directly from the BTS.
The Powerwave Full Band Duplex Filter
for 1900 MHz with DC bypass combines
uplink and downlink and is designed for
both outdoor or indoor installation:
Outdoor Design
Built-in DC Transparency
Compact Design
Low Insertion Loss
Fullband Design
Lightning Protected
Duplex Filter
1900 MHz
Range Part Number Return Loss Insertion Loss
MHz (dB) (dB)
HI GH DENSI TY EQUI PMENT HI GH DENSI TY EQUI PMENT
05
VersaFlex
TM
Enclosure Solutions - NEW
BASE STATI ON
SYSTEMS
44
Flexibility
The VersaFlex Enclosure has been
designed from the ground up as an
ultra light weight modular electronics
equipment enclosure. The design
allows flexibility in site selection and
construction. For installation flexibili-
ty, the VersaFlex can be delivered
as a turn-key integrated solution or
palletized as modular pieces to be
erected on-site.
The VersaFlex interior has been
designed for form, fit and function to
maximize space utilization. There
are 450 rack units (RU) of equip-
ment space that allow backward
compatibility with legacy equipment
and migration to future technologies.
This interior space also accommo-
dates operations technicians during
inclement weather.
Key Features/Benefits:
Revolutionary cabinet solution for
wireless carrier application
Utilizes about half the space of tradi-
tional shelters, resulting in major
lease savings and more site options
Weighs only 3,000 pounds vs.
30,000 50,000 for traditional shelters
Unique, internal sub-floor HVAC sys-
tem that eliminates hot spots, is qui-
eter and is more energy efficient
Knock down modular design to
accommodate site growth require-
ments as well as on-site assembly
Sliding door design reduces lease
area requirement by eliminating
door swing
Revolutionary sliding equipment
racks that reduce floor space
required (and hence lease space),
and utilizes a rolling cable tray
Unique cabinet access with NEMA-4
sliding/locking door which is water
and air tight, and helps control con-
densation
Space saving, low profile, vertically
mounted battery plant
Indoor rated equipment can be uti-
lized, which lowers cap-x costs for
operators
Optional stealth generator module is
low profile, low noise and integrated
into VersaFlex Enclosure architecture
High Density Equipment
The VersaFlex Enclosure has been designed
to maximize available rack space for revenue
generating equipment while minimizing overall
footprint. The VersaFlex will typically increase
equipment capacity by 50% within the same
footprint as traditional cabinets
for shelters.
With patents pending, the VersaFlex incorpo-
rates a sophisticated thermal management
system to accommodate heat output from
high density equipment.
The heart of the VersaFlex is a rolling carriage
system that allows high density storage while
facilitating full access to rack space. Also with
patents pending, the rolling carriage system
incorporates a cable track management system
for power, data and communication cables.
RF MCPA / SCPA
05
Power Amplifier Products
BASE STATI ON
SYSTEMS
46
Get to market faster with ultra-linear, multi-protocol, high power amplifiers using digitally linearized designs that
deliver industry-leading density, efficiency and value.
Powerwave designs, develops and
manufactures RF power amplifier solu-
tions for OEM partners and network
operators worldwide. Powerwaves line
of MCPAs and SCPAs for
Cellular/PCS/DCS and 3G base stations
is one of the industrys largest with solu-
tions for all air interfaces and all base
station architectures. Leading edge RF
amplifier technology and global manu-
facturing resources enable Powerwave
to develop cost effective, high perform-
ance solutions for both OEM and
Network Operator customers.
Powerwaves leading edge amplifier
solutions include:
MCPA solutions with highly inte-
grated RF conditioning front-end
subsystems
Ultra-linear, multi-protocol, high
power MCPAs with digitally lin-
earized designs
Flexible, reconfigurable architec-
tures providing future proof
upgradeability to ensure risk-free
migration to new standards, pro-
tocols, and platforms
Industry leading density and effi-
ciency which drives significant
space and cost savings
05
Powerwave RF conditioning solutions deliver a higher-level of integration to provide higher-value solutions.
RF Conditioning Products
Powerwave provides some of the indus-
try's most advanced and efficient RF
conditioning solutions:
Higher quality, reduced part count
and streamlined manufacturing
speeds time to market
Lower cost, greater reliability and
faster, high-volume delivery
Lower total cost of ownership
Higher-level of integration delivers
higher-value solutions.
The combination of our unified/integrat-
ed design team approach and their
broad expertise across all disciplines
of RF and digital signal compe-
tence, enables Powerwave to
design and deliver RF condition-
ing solutions with higher levels of
integration, and do it quickly. This
improves quality, reduces part
count, streamlines manufacturing,
speeds time to market, delivers
better value and increases reliabil-
ity for lower total cost of owner-
ship (TCO). Volume manufactur-
ing on our global platform
enhances the added-value this
combination delivers and further
shortens time to market.
h
i
g
h
e
r
-
v
a
l
u
e
BTS RF MODULE
Analog/Digital Conversion Filtering
RF Transceivers
Tx/Rx Filtering
LNA
Rx MCPA/SCPA Tx
BTS RF MODULE
RF Transceivers
Tx/Rx Filtering
LNA
Rx MCPA/SCPA Tx
r
e
l
i
a
b
i
l
i
t
y
Microwave Filter
We combine reliability and integration capabilities to surpass your expectations.
RF RF
05
Base Station Filter
BASE STATI ON
SYSTEMS
48
Provide filtering for both up and down link along with the requisite near and out of band performance.
Highly integrated VSWR,RET,TMA support functionality.
The Powerwave Microwave filter pro-
vides steep filtering for any frequency
band in the microwave GHz range up
to 40 GHz along with the requisite near
and out of band performance. The band
pass filters are integrated with other filter
types such as low pass filters. The
Microwave Filters are also integrated
with ferrites in certain applications.
Powerwave Microwave filter tech-
nology ranges from traditional
cavity designs to latest E-Plane
designs. Different manufacturing
methods and material are used
depending on the application and
with the target to minimize manu-
facturing cost.
Powerwave Microwave filter:
High reliability
Cost effective solution
High degree of integration
Powerwave Filter Panels come in dual
or single format and can be tailored to
fit customer requirements:
High reliability
Cost-effective solution
High degree of integration
Trouble-free network operation
The Powerwave Base Station Filter
provides steep filtering for any fre-
quency band, along with the requi-
site near and out of band perform-
ance. Down link signals are ampli-
fied in the LNA stage. Feeder gain
compensation as well as TMA gain
compensation is handled via the
communications interface.
To supply the TMA with power
and to monitor the TMA, the unit
induces DC and communication
interface on the feeder. VSWR
for the up and down link is moni-
tored via directional couplers and
associated electronics at the com-
munications port. Antenna beam
steering functionality with remote
electrical tilt is also a part of the
integrated Base Station Filter.
Integrated Power Transceiver
Integrated linearized transmitter and MCPA with diversity receivers and a high-speed digital interface
I PT I NTEGRATED RADI O PRODUCTS
05
Integrated Radio Products
BASE STATI ON
SYSTEMS
50
Enabling lower-cost 3G base stations through RF integration and standard digital interfaces
Powerwave is developing a family of
integrated radio products to enable new,
low-cost base station architectures.
Complete RF sub-systems
Fiber-fed remote Radio Heads
Digital Interface (CPRI)
Other interfaces available
The combined radio functions enable
the use of Powerwave proprietary
Crest Factor Reduction (CFR) and
Digital Pre-Distortion (DPD) to reduce
cost and improve performance.
W-CDMA at 2100MHz &1900MHz
Up to 3 carriers in 15MHz
30W and 60W versions
Tx diversity with a second unit
Digital interface (CPRI)
Roadmap to lower cost
Roadmap to higher efficiency
Lower cost manufacturing
i
n
t
e
g
r
a
t
i
o
n
T
R
X
T
R
X
T
R
X
F
i
l
t
e
r
M
C
P
A
F
i
l
t
e
r
M
C
P
A
F
i
l
t
e
r
M
C
P
A F
i
l
t
e
r
I
P
T
I
P
T
I
P
T
F
i
l
t
e
r
F
i
l
t
e
r Digital
Interface
RF
Interface
Range: < 100m
Coaxial
Cable
Range: > 10km
Fiber Optic
Cable
DRH
DRH
DRH
Transmitters, receivers & power amplifiers
Powerwave integrated radio products
Filters & low-noise amplifiers
Digital interface
RF interface
TMA
TMA
TMA
TMA
TMA
TMA
10011010
Rx1
+
=
Tx
IQ
Rx2
T
R
x
TxOut
TxIn
M
C
P
A
I
P
T
10011010
Integrated transmitter, MCPA, diversity receivers, LNA and duplexer in a single outdoor unit
All radio equipment can now be relocated
from the base-station cabinet to a remote
location through a low-cost fiber-optic
cable. The result is no wasted RF power
and reduced site costs.
W-CDMA at 2100MHz
12.5W nominal Tx power
<2dB typical Rx noise figure
No cooling fans
Lightweight (<20kg)
Rooftop or tower deployment
DRH
05
Digital Radio Head
BASE STATI ON
SYSTEMS
52
Ant1
Ant2
Ant1
Ant2
E/O: Electrical/Optical conversion
Interface to
cascade
multiple DRHs
10011010
Rx1
+
+
+
+
=
Tx
IQ
Rx2 T
R
x
TxOut
TxIn
M
C
P
A
Ant1
Tx1
Rx1
Ant2
Tx2
Rx2
F
i
l
t
e
r
10011010
IQ In
IQ Out
TMA
DRH
E/O
Integrated transmitter, MCPA, diversity receivers, LNA and duplexer in a single outdoor unit
All radio equipment can now be relocated
from the base station cabinet to a remote
location through a low-cost fiber-optic
cable. The result is no wasted RF power
and reduced site costs.
W-CDMA at 2100MHz
12.5W nominal Tx power
<2dB typical Rx noise figure
No cooling fans
Lightweight (<20kg)
Rooftop or tower deployment
B
A
S
E
S
T
A
T
I
O
N
S
8
0
0
T
O
2
1
0
0
M
H
z
8
0
0
/
2
1
0
0
MCPA
05
Multi-Carrier Power Amplifier (MCPA) Products
COVERAGE
SYSTEMS
54
Powerwave MCPA Products enable rapid deployment of flexible, future-ready coverage optimization solutions
with maximum field reliability.
*Typical performance
The Powerwave family of proven
coverage and capacity solutions for
global wireless networks sets the
standard for cost effective, high per-
formance network upgrade solutions.
The Powerwave MCPA product
solutions deliver high performance
at low cost and rapid time to market,
enabling the most efficient use of
critical network infrastructure
resources available today.
Cost effective: A fraction of the
cost of cell splitting
High performance: Forward
compatibility with all 3G evolution
paths, high efficiency
Rapid implementation: Ancillary
equipment to BTS, easy installa-
tion, compact footprint
Proven solutions: Pioneer in the
use of MCPA solutions for network
operators in North America
Quality and reliability: High
volume, high quality to ISO-9001,
TL 9000 and ISO 14000 standards
BTS RF MODULE
RF Transceivers
Tx/Rx Filtering
LNA
Rx MCPA/SCPA Tx MCPA
Tx/Rx
Filtering
Tx/Rx
Filtering
900 MHz G3L-929-60E GSM/EDGE 80W 11.8% -65 dBc
900 MHz G3L-929-135 GSM/EDGE 135W 15% -65 dBc
2100 MHz G3L-2100-60E WCDMA 60W 8.8% -65 dBc
900 MHz G3L-929-60E GSM/EDGE 80W 11.8% -65 dBc
2100 MHz G3L-2100-60E WCDMA 60W 8.8% -65 dBc
800 MHz MCA9129-120 TDMA/GSM/EDGE/WCDMA 120W 12.5% -65 dBc
CDMA/1xRTT/1xEVDO
G3L-850-135 GSM/EDGE/WCDMA/CDMA/ 135W 18.5% -65 dBc
1xEVDO
1900 MHz G3L-1929-120 TDMA/GSM/EDGE/WCDMA 100W/ 13.9% -65 dBc
CDMA/1xRTT/1xEVDO 120W
North America: MCPA Solutions for 800/1900 MHz Networks
Band Model Air Interface Output Efficiency IMD
Power* Performance
Europe: MCPA Solutions for 900/1800/2100 MHz Networks
Power* Performance
Asia: MCPA Solutions for 900/1800 MHz Networks
Power* Performance
8
0
0
/
1
9
0
0
M
H
z
8
0
0
/
1
9
0
0
I NDOOR PLATFORM I NDOOR PLATFORM
05
Indoor MCPA Platform
COVERAGE
SYSTEMS
56
Cost-effective, high-performance upgrade solutions for 800 and 1900 MHz networks.
800 MHz MCA9129-120 PAF-1&2 Upon Request
PAF-0850
PAF-0813
G3L-850-135 PAF-0843
PAF-0813
PAF-0863
1900 MHz G3L-1929-120 PAF-1913 Upon Request
PAF-1943 Upon Request
PAF-1963
Dual Band PAF-8943 Upon Request
PAF-8963 Upon Request
North America: Standard Integrated System Solutions
Band MCPA Family Indoor 3-Sector Outdoor Cabinet
The indoor MCPA systems platform
features multiple high-efficiency
MCPA modules which can be
configured to meet a wide range of
micro-cell and macro-cell capacity
and coverage growth scenarios.
Multiple interface compatibility
provides an evolutionary path to 3G
including mixed-mode capability.
The platforms modular architecture
provides scalability for future growth
planning. The economical, scalable
indoor platform supports 1-4 mod-
ules per sector depending on sec-
torized power requirements.
Standardized Tx/Rx filtering archi-
tecture provides compatibility with
multiple base station types.
High efficiency, high power
MCPA modules
Evolutionary path to 3G via
multi-mode capability
Standard platform architecture
for minimal site footprint
Modularity to meet a wide range
of indoor applications
Scalability to support current
and future growth requirements
Standardized BTS integration
solutions for all BTS types
Additional configurations available upon request
PAF-1913-H050
BTS RF MODULE
RF Transceivers
Tx/Rx Filtering
LNA
Rx MCPA/SCPA Tx MCPA
Tx/Rx
Filtering
Tx/Rx
Filtering
8
0
0
T
O
2
1
0
0
M
H
z
8
0
0
/
2
1
0
0
OUTDOOR PLATFORM
05
COVERAGE
SYSTEMS
58
OS-1 Outdoor System
The OS-1 platform has a modular
architecture that provides operators
with complete uplink and downlink
enhancement solution. The OS-1 uti-
lizes Powerwaves high efficiency
Feed Forward (FF) Multi-carrier Power
Amplifier (MCPA) making it a versatile
capacity and coverage solution for
UMTS micro and macro-cell sites.
The universal mounting design sup-
ports indoor, ground and rooftop appli-
cations. A fail-safe mechanism
enables base stations to continue
operation in case the OS-1 shuts
down. The OS-1 system also provides
12VDC voltage to power the tower-
mounted amplifiers (TMAs).
900MHz OS-0951-P0-000 900MHz OS System with DC One TMA EGSM/EDGE 100 up to 8 CE, MII
Transparency for use with TMA Compatible
OS-0951-P0-003 900MHz OS System with LNA One LNA EGSM/EDGE 95 up to 8 CE, MII
and VSWR
OS-0951-P0-004 900MHz OS System with LNA, One LNA EGSM/EDGE 95 up to 8 CE, MII
VSWR and remote TX gain
management
1800MHz OS-1851-H0-000 1800MHz System with DC One TMA GSM/EDGE 85 up to 8 CE
OS-1851-H0-003 1800MHz OS System with LNA One LNA GSM/EDGE 80 CE
and VSWR
1900MHz OS-1951-H0-003 1900MHz OS System with DC One TMA TDMA 85 up to 8 UL, FCC
Transparency for use with TMA Compatible GSM / EDGE
WCMDA /
CDMA 1xEVDO
2100MHz OS-2151-S0-000 1900MHz OS System with DC One TMA WCDMA 40 up to 4 CE
OS-1
Band Model Description MCPA Uplink Air Interface Output Max Agency
Module Power* Carriers Certification
OUTDOOR PLATFORM
OUTDOOR PLATFORM
05
COVERAGE
SYSTEMS
60
OUTDOOR PLATFORM
900MHz OS-0921-V0-000 900MHz OS System with DC Two TMA GSM/EDGE up to 120 up to 8 CE, MII
OS-0921-V0-003 900MHz OS System with DC Two LNA GSM/EDGE up to 110 up to 8 CE, MII
Transparency for use with TMA
1800MHz OS-1821-H0-000 1800MHz OS System with DC Two TMA GSM/EDGE up to 160 up to 8 CE
OS-1821-H0-001 1800MHz OS System with LNA Two LNA GSM/EDGE up to 160 up to 8 CE
and VSWR
1900MHZ OS-1921-H0-000 1900MHz OS System with DC Two TMA TDMA up to 160 up to 8 UL, FCC
WCMDA / CDMA
1xEVDO
OS-2
The OS-2 platform has a modular
architecture that provides operators
with complete uplink and downlink
enhancement solutions. The OS-2
combines two Powerwave high effi-
ciency Feed Forward (FF) Multi-carrier
Power Amplifier (MCPA) modules
making it a versatile capacity and cov-
erage solution for micro and macro-
cell sites. The universal mounting
design simplifies indoor, ground and
rooftop installations. The OS-2 multi-
ple interface capability provides opera-
tors with an evolutionary path from
GSM to EDGE including mixed-mode
capability. A fail-safe mechanism
operation in case the OS-2 shuts
down. The OS-2 system is available
with an LNA uplink option or integrat-
ed 12VDC supply for TMA operation.
The latter configuration is referred to
as a TMA model.
The OS-2 eliminates the traditional
coverage/capacity trade-off in GSM
base stations. With an OS-2, the
base station can maintain its cover-
age radius (TX power) while increas-
ing the number of carriers on existing
antennas by amplifying all carriers
through one MCPA.
OS-2 Outdoor System
OUTDOOR PLATFORM
05
COVERAGE
SYSTEMS
62
1900MHZ OS-1921-H0-001 1900MHz. OS system with DC Three TMA TDMA up to 210 up to 8 UL, FCC
WCMDA / CDMA
1xEVDO
OS-3
OUTDOOR PLATFORM
Cost-effective, high-performance
indoor/outdoor coverage and capacity
enhancement solution for network
operators.
Powerwave OS systems provide net-
work operators with a compact, low
cost solution to enhance link budget
performance as well as coverage and
capacity performance.
The OS systems utilize Powerwaves
high efficiency Feed Forward (FF)
Multi-carrier Power Amplifiers (MCPA)
making them an ideal capacity and
coverage solution for micro and
macro-cell sites. Multiple interface
compatibility provides an evolutionary
path to 3G, including mixed-mode
capability. The OS systems provide an
economical, sectorized solution for low
to medium power applications.
All systems feature a standardized
Tx/Rx filtering architecture for com-
patibility with a broad range of base
station models. A fail-safe mechanism
operation in case the OS system is
shuts down.
Utilize high efficiency, high power
MCPA modules
Provide evolutionary path to 3G
via multi-mode capability
Compact design
Scalability to support current and
future growth requirements
Standardized BTS integration
solutions for all BTS types
Available in 900, 1800, 1900 and
2100MHz. bands.
Globally deployed by network
operators
OS-3 Outdoor System - NEW
9
0
0
/
1
9
0
0
REPEATERS
05
Repeater Systems
COVERAGE
SYSTEMS
64
Address coverage challenges with Powerwave Repeater systems that feature the lowest lifetime cost.
Powerwave Repeater Systems are
highly-integrated to deliver cost-
efficient coverage in extremely
compact form factors:
Lower acquisition costs and
lowest lifetime/operational costs
Small footprint with no need for
expensive transmission lines,
special cabinets, oversize bat-
tery backup or extra cooling
Multi-band, multi-operator
options that enable network
sharing to reduce capital
expenses yet allow discrete,
individual control for each
operator
Reduced site rental costs
EDGE Compatible
Fiber optical and/or remote
interface as option
Frequency band UL 890-915 MHz 890-915 MHz
Frequency band DL 935-960 MHz 935-960 MHz
No. of channels 1-8 ----
Filter bandwith 200 KHz 0.5-16.9 MHz*(remote adjustable)**
Output power +33 dBm RMS +29 dBm PEP (+26 dBm RMS)
Gain adjustment in 1 dB steps 55-90 dB 45-85 dB
Gain variation 4 dB 6 dB
Pass band ripple 3 dB 4 dB
Noise figure 4 dB 6 dB
Group delay 5 s 6 s
GSM 900 Channel-Selective AR1700 Family Band-Selective AR1200 Family
Filter bandwith 200 KHz 0.5-16.9 MHz* (remote adjustable)
Group delay 5 s 6 s
GSM 1800 Channel-selective AR2100/AR2700 Family Band-selective AR2200 Family
Filter bandwith 200 KHz 0.5-16.9 MHz* (remote adjustable)
Group delay 5 s 6 s
GSM 1900 Channel-selective AR3100/AR3700 Family Band-selective AR3400 Family
9
0
0
/
1
8
0
0
/
1
9
0
0
M
H
z
**25 MHz optional
REPEATERS
COVERAGE
SYSTEMS
66
Frequency band UL 880-915 MHz
Frequency band DL 925-960 MHz
No. of channels 1-8
Output power +33 dBm RMS
Gain Adjustment in 1dB steps 55-90 dB
Gain variation 4 dB
Pass band ripple 1 dB
Noise figure 4 dB
Group delay <5 s
EGSM 900 Channel-Selective
AR1700/902 Family
RGSM 900 Channel-selective
AR1100/802 Family
No. of channels 1-4
Output power +33 dBm RMS
Gain Adjustment in 1 dB steps 55-90 dB
Gain variation 4 dB
Noise figure 4 dB
Group delay <5 s
AR1712 900/900 Combi-model Channel and Band-Selective
AR2117 1800/900 Dual-band Channel-Selective
Combi/Dual-band/Dual-cell
Different combinations in standard housings are available, see example below.
Frequency Remark

R
E
P
E
A
T
E
R
S
1
9
2
0
/
2
1
7
0
REPEATERS REPEATERS
05
WCDMA Channel Selective Repeaters
COVERAGE
SYSTEMS
68
Reliable, flexible coverage solutions for 2100 MHz frequency bands.
Number of channels 1-2
Filter bandwidth 5 MHz
Gain adjustment in 1 dB steps 60-90 dB
Absolute group delay 6 s
Output power (DL) RMS, one WCDMA carrier, standard (AR6500) +30 dBm
Output power (DL) RMS, one WCDMA carrier, high power (AR6560) +38 dBm
Output power (UL) RMS, one WCDMA carrier +20 dB
Pass band ripple within 4,0 MHz 2 dB
Gain variation 4 dB
Noise figure 3 dB
WCDMA Channel-Selective AR6500 Family
AR6565 2100/2100 Combi model with 4 channels in same housing
AR6521 2100/1800 Dual band 2 channel GSM 1800 and 2 channel WCDMA
AR6517 2100/900 Dual band 2 or 4 channel GSM 900 and 2 channel WCDMA
Frequency Remark
New! The WCOMA repeater is an
excellent complement to Node B in
coverage extension and capacity
enhancement.
2-4 channel configurable
2 channel high power
High selectivity for high adja-
cent channel rejection
2 channel stand-alone upgrade
to fit existing GSM sites (dual
band)
control interface as option
c
h
a
n
n
e
l
s
e
l
e
c
t
i
v
e
8
2
4
/
1
9
9
0
REPEATERS
05
Band Selective Repeaters
COVERAGE
SYSTEMS
70
Flexible, low-cost coverage solutions for 800 and 1900 MHz frequency bands.
Filter bandwidth (remote adjustable) 0.5-16.9 MHz*
Output power DL +36 dBm PEP (+33 dBm RMS)
Output power DL +39 dBm PEP (+36 dBm RMS) AR4240
Output power UL +36 dBm PEP (+33 dBm RMS)
Gain variation 6 dB
Noise figure 6 dB
Group delay 6 s
TDMA/CDMA Band Selective AR3400 Family
Filter bandwidth (remote adjustable) 0.5-16.9 MHz*
Gain variation 6 dB
Noise figure 6 dB
Group delay 6 s
AMPS Band Selective AR4200 Family
Frequency band UL UL 806-824 MHz
Frequency band DL DL 851-869 MHz
Filter bandwidth (remote adjustable) 0.5-16.9* MHz
Output power DL +36 dBm PEP (+33 dBm RMS)
Gain variation 6 dB
Noise figure 6 dB
Group delay 6 s
iDEN/SMR Band Selective AR4600 Family
AR4242 800/800 Combi model with 2 band-selective sections in same housing
AR3434 1900/1900 Combi model with 2 band-selective sections in same housing
AR3442 1900/800 Dual-band/dual-cell with 2 band-selective sections in same housing
Frequency Remark
Easy to install: requires no
expensive transmission
equipment
Modular design enables easy
upgrade to additional bands at
a relatively low cost
Adjustable filter design allows
remote adjustment of filter
bandwidth to easily adjust for
specific site conditions
Mixed mode GSM/CDMA
control interface as option
Powerwave TDMA/CDMA/AMPS/iDEN
Band Selective Repeaters are avail-
able in easily customizable configura-
tionscombination band, dual band
and dual cellto accommodate any
number of challenging environments:
b
a
n
d
s
e
l
e
c
t
i
v
e
* 25 MHz option
8
9
0
/
1
9
9
0
REPEATERS
05
Compact Repeaters
COVERAGE
SYSTEMS
72
Frequency band UL 890-915 MHz 1710-1785 MHz 1920-1980 MHz
Frequency band DL 935-960 MHz 1805-1880 MHz 2110-2170 MHz
Filter bandwidth 0.5-15.0 MHz* 0.5-15.0 MHz* 0.5-15 MHz
(remote adjustable) (remote adjustable) (remote adjustable)
Output power +25 dBm PEP +26 dBm PEP +24 dBm RMS DL
+20 dBm RMS UL
Gain adjustment in 1 dB steps 55-70 dB 55-70 dB 55-70 dB
Gain variation 5 dB 5 dB 5 dB
Pass band ripple 5 dB 5 dB 5 dB
Noise figure 8 dB 8 dB 3 dB
Group delay 6 s 6 s 6 s
GSM 900/1800/2100 Compact Repeater Compact Repeater Compact Repeater
ALR1200 Family ALR2200 Family ALR6200 Family
Frequency band UL 1850-1910 MHz 824-849 MHz 806-824 MHz
Frequency band DL 1930-1990 MHz 869-894 MHz 851-869 MHz
Filter bandwidth 0.5-15.0 MHz* 0.5-15.0 MHz* 0.5-15.0 MHz
(remote adjustable) (remote adjustable) (remote adjustable)
Output power (PEP) +28 dBm +28 dBm +28 dBm
Gain adjustment in 1 dB step 55-70 dB 55-70 dB 55-70 dB
Gain variation 5 dB 5 dB 5 dB
Pass band ripple 5 dB 5 dB 5 dB
Noise figure 8 dB 8 dB 8 dB
Group delay 6 s 6 s 6 s
25 MHz optionally
TDMA/AMPS/iDEN/CDMA Compact Repeater Compact Repeater Compact Repeater
ALR3200 Family ALR4200 Family ALR4600 : iDEN/SMR
No. of channels ---
Output power +25 dBm PEP
Filter bandwidth 0.5-15.0 MHz
Gain (max variation) 5 dB
Noise figure 8 dB
Group delay 6 s
EGSM 900 Compact Repeater
ALR1200/901 Family
ALR3242 1900/800 Combi model with 2 band-selective sections in same housing
ALR2212 1800/900 Combi model with 2 band-selective sections in same housing
ALR2222 1800/1800 Dual-band/dual-cell with 2 band sections in same housing
Frequency Remark
*Optional 25 MHz b
a
n
d
s
e
l
e
c
t
i
v
e
Easy to install on walls/poles
Remote adjustable bandwidth
Fiber optical or remote control
interface as option
Powerwaves compact repeater is the
ideal solution for indoor coverage due
to the rugged design small in size but
big in performance and modularity.
REPEATERS REPEATERS
05
Fiber Optic Repeaters
COVERAGE
SYSTEMS
74
The Fiber Optic Repeater is a standard Powerwave Repeater of any type fitted with a Fiber Optic Unit.
Special Features
Long distance operation over single
mode fiber
Adjustable gain for link optimization
Combined fiber operation by using
WDM
Full remote control over fiber
Easy commissioning with Windows-
based terminal software
Alarm set-up and operation fully
compatible with OMO and OMS
software
The basic building block of the net-
work is the transceiver board called
Fiber Optic Node (FON). It is used
as a sub-assembly in the FOU
which can be installed in any
Powerwave repeater, or as a
stand-alone board in our Base
Station Master Unit (BMU).
The FON performs the conversa-
tions between RF signal and light
and vice versa. The FON also
includes a sub-carrier to be used
for data communication (fiber-to-
fiber) between different nodes in
the fiber optic network. This feature
enables the operator to have full
remote control of the fiber optic
repeater (or several) from only
one access point.
The distribution system is built up
by a master unit and one or sev-
eral fiber optic repeaters. The
system allows for the master unit
to be fed with a signal either
directly from the BTS or through
the air. The fiber optic repeater
can distribute the received signal
to the other co-located repeaters.
A single FON can provide optical
signal to a maximum of four other
FONs and the system is thus
often built in either star or chain
topology. Multiple nodes can be
used in a master unit to facilitate
large distribution systems. In
order to reduce the number of
fibers required by the system,
wavelength division multiplexing
can be utilized to allow the same
fiber to be used for both up and
downlink.
The Powerwave fiber optic distri-
bution system can be seamlessly
integrated into Powerwave single-
use or multi-use Operation and
Maintenance System (OMS),
which provides full access to all
repeaters.
Electrical Specification FON
Common
Bandwidth @ 3 dB* 800-2200 MHz
Power consumption, total <5 W
Transmitter
Laser optic wavelength DFB 1310 or 1550 nm
Max continuos RF input +36 dBm
Optical output power, two levels +3/0 dBm
RF attenuation settable by SW in 1 dB steps 0-20 dB
Receiver
Optic Wavelength 1250-1600 nm
Max optic power input +5 dBm
RF attenuation settable by SW in 1 dB steps 0-20 dB
Alarm threshold level, settable warning 0-40 dBm
Alarm threshold level, settable error 0-40 dBm
FON
FON
FON
FON
WI DEBAND COVERAGE SYSTEM WI DEBAND COVERAGE SYSTEM
05
Wideband Coverage System
COVERAGE
SYSTEMS
76
Powerwave Wideband Coverage
System is a wideband multi-tech-
nology and multi-operator system
to be used where one or several
frequency bands are combined and
further distributed to a common
distribution network over fiber.
Typical applications are:
Airports
Covention centers
Subways
Public buildings
Shopping malls
Outdoor DAS
In these types of public environ-
ments several operators are offer-
ing coverage. Using centralized
Base Station hotels and distribute
to a common antenna system will
reduce the amount of hardware
installations and visual impact.
This is often a requirement from
facility owners, authorities etc.
Basic Principles of a WCS system
Powerwave Wideband Coverage
System includes the mullti-technol-
ogy, multi-operator hardware and
software for cost effective cover-
age, build on our well-proven
design and the complete manage-
ment system of today.
WI DEBAND RADI O HEAD WI DEBAND RADI O HEAD
05
Wideband Radio Head
78
Features/Benefits:
Fiber optic or coaxial
distribution
Multi band capability
Modular design
Remote control option
Integrated power supply
IP65 rating
Instantaneous bandwidth
25, 60 or 75 MHz
Quad band in one box
The Powerwave Wideband Radio
Head is intended for use in DAS
(Distributed Antenna Systems) for
the distribution of RF signals in
dense urban and residential areas,
tunnels, subways, airports and
buildings where there is a need for
a high quality and cost efficient
coverage solution. This solution is
based on a modular design, provid-
ing support for various combina-
tions of frequency bands and out-
put power classes. Each node has
its own IP address enabling the
Wideband Radio Head network
operator easy monitoring and man-
agement, utilizing the proven and
user-friendly Windows-based
Operation and Maintenance
System (OMS) by Powerwave.
Frequency Range 896-901 MHz (Uplink) (SMR 900)
935-940 MHz (Downlink) (SMR 900)
806-824 MHz (Uplink) (SMR 800)
851-869 MHz (Downlink) (SMR 800)
Output Power (@ -13 dBm IMD)
900 MHz @ 8 ch + 27 dBm/ch. (RMS)
@ 16 ch + 25 dBm/ch. (RMS)
800 MHz @ 8 ch + 27 dBm/ch. (RMS)
@ 16 ch + 25 dBm/ch. (RMS)
Gain Adjustment Range 30 dB
Gain Step Resolution 1dB
Gain Variation < 2 dB
Max absolute delay < 300 ns
System Noise Figure 4 dB (includes fiber optic node)
Input IP3 Uplink (max gain) - 25 dBm
Maximum RF input uplink + 13 dBm (non destructive)
Return Loss 14 dB
Output IP3 Downlink + 54 dBm
+ 60 dBm (HP Option)
Uplink AGC 30 dB
Downlink AGC 30 dB
Power Supply 110/230VAC
Power Consumption 110W/160W (std./HP)
Example of a product specification for SMR/iDEN 800/900 MHz DAS networks (Electrical Specifications)
Note: Power rating includes duplexer loss.
COVERAGE
SYSTEMS
The Wideband Radio Head is
part of the WCS system offer-
ings and is not intended to be
used in any stand-alone off-air
installations
WI DEBAND RADI O HEAD WI DEBAND RADI O HEAD
05
Wideband Radio Head
COVERAGE
SYSTEMS
80
Dimensions (WxHxD) High Cover 17.4" x 20.9" x 7.7"/440mm x 530mm x 280mm
Weight High Cover 82 lbs/37 kg
Dimensions (WxHxD) Low Cover 17.4" x 20.9" x 6.9"/440mm x 530mm x 175mm
Weight Low Cover 46 lbs/21 kg
RF Connectors N-type female or DIN 7/16 female
Fiber Connectors FC-APC, other options available
Operating Temperature -25C to +55C/-13F to +130F
Remote Cabinet IP65, cast, convection cooling
Summary Alarm contact Normally closed (open during alarm)
Mechanical Specifications
Common Mechanical Specifications
WRH with max 2 bands are housed in a low cover enclosure
WRH with max 4 bands are housed in a low cover enclosure
GSM 900 DCS 1800
8 carrier 18 21
16 carrier 16 19
Output Power (dBm/carrier)
Temperature range-13 to + 131 F
-25 to + 55 C
Casing class NEMA4/IP65
Environmental Specification
Dimensions. (W x H x D) 174 x 209 x 9.6 Inches
440 x 530 x 240 mm
Weight 75 lbs
34 Kg
RF-connectors N-type female
Mechanical Specification
WCDMA
4 carrier 30
8 carrier 27
12 carrier 25
Frequency band UL GSM 890-915 MHz
Frequency band DL GSM 935-960 MHz
Frequency band UL DCS 1710-1785 MHz
Frequency band DL DCS 1805-1880 MHz
Frequency band UL WCDMA 1920-1980 MHz
Frequency band DL WCDMA 2110-2170 MHz
Gain adjustment range 30 dB
Gain step resolution 1dB
Gain variation within each relevant band <2 dB
Noise figure UL at max gain, 25 C 3 dB
Power supply voltage 115/230 VAC
Power consumption max <425 W
Electrical Specifications
Example of product specifications for a 900/1800/2100 MHz DAS network
Xxxxx Xxxxxxxx Xxxx Xxxxx Xxxxxxxx Xxxx
REPEATERS
05
The WCDMA Mini
Repeater is targeting
medium to small indoor
coverage in offices or in
larger shops. The
adjustable bandwidth
allows easy expansion of
capacity when needed.
Low visual impact
Remote controll interface
as option
Mini Repeater
COVERAGE
SYSTEMS
82
Filter bandwidth 0.5-15 MHz
Output power +18 dBm
Gain adjustment range 55-70 dB
Pull band ripple 3 dB
Noise figure 4 dB
Group delay 6 s
WCDMA 2100 Mini Repeater
ALS 6200 Family
Filter bandwidth 5.10-15 MHz
Output power +15 dBm
Gain adjustment range 50-70 dB
Pull band ripple 4 dB
Noise figure 4 dB
Group delay 6.5 s
WCDMA 2100 Nano Repeater
AL 6200 Family
REPEATERS
Nano repeater
The WCDMA Nano
Repeater is the perfect
choice for small indoor
coverage e.g. in retailer
shops, resturants, offices.
Small size, low visability
Inbuilt antenna for quick
deployment
5, 10 or 15 MHz fixed
bandwith option
COVERAGE SYSTEM I NNOVATI ONS

COVERAGE
SYSTEMS
84
Maximizing performance and coverage
COVERAGE SYSTEM I NNOVATI ONS
Applications
Campuses
Hospitality/Convention
centers
Airports
Subways
Road tunnels
Shopping centers
High-rise buildings
Railways
Rural areas
Mines
In-train
Ferries
Sports arenas
Dense urban zones
Medical centers
Educational facilities
Manufacturing/industrial
plants
Turn-Key Services
Site Survey
System Design
Site Engineering
Project Management
Installation
System Commissioning
System Optimization
Performance Verification
System Documentation
Quality Program
Operations and
Maintenance
Technical Training
Protocols Supported
GSM
EDGE
CDMA
WCDMA
UMTS
TDMA
FDMA
1XRTT
EV-DO
CDMA2000
NPCS
iDEN
TETRA
One Way/Two Way Paging
LTR Trunking
SMR
ESMR
EDACS
Analog
Frequencies Supported
VHF
UHF
700MHz
800 MHz
900 MHz
1800 MHz
1900 MHz
2100 MHz
2400 MHz
Who we are
Powerwave Technologies provides
coverage and capacity solutions for the
simplest to the most challenging indoor
and outdoor environments. Our lead-
ing edge solutions are engineered to
deliver the highest quality customer
experience for the lowest capital
expenditure.
What we can do for you
Powerwaves projects are managed by
dedicated teams possessing unmatched
expertise that comes from solving easy,
to some of the most difficult RF chal-
lenges in the world. From public safety
and security in-building solutions like
the Cumberland County Detention
Center in North Carolina, to large-
scale indoor environments like the
Moscone Center in San Francisco,
California, to complex international
projects like the Olympic Athletic
Center in Athens. Powerwave has
unmatched experience in this high-
ly-specialized category.
Note: iDEN is a registered trademark of Motorola.
COVERAGE SYSTEM I NNOVATI ONS COVERAGE SYSTEM I NNOVATI ONS
05
COVERAGE
SYSTEMS
86
Services: Powerwave utilizes a well defined eight-step project implementation process
to ensure complete customer satisfaction.
Solutions: Seattle-Tacoma Intl Airport
TOTAL CUSTOMER
SATISFACTION
Detailed System Design
Installation Planning
Factory Integration
& Training
System Installation
System Optimizing
& Testing Conditional
Acceptance
Final Acceptance
Documentation
& Training
Warranty
& Support
1
2
3 4
5 6
7
8
Business Issue:
The Sea-Tac International Airport want-
ed a comprehensive indoor distributed
antenna system that would leverage
state-of-the-art technology to provide
airport operations, airline operations,
tenant and concessionaire operations,
and more than 29,000,000 airport trav-
elers who pass through the airport each
year with seamless wireless coverage
throughout the airport premises.
Powerwave Solution:
An indoor DAS that provides seamless
wireless phone and data service
throughout the airport and up to a
radius of 250 feet around the airport.
Supports all major wireless carriers
serving the area and technologies
including cellular and PCS. Supports
Wi-Fi technology by enabling transmis-
sion of the Wi-Fi signal through its coax-
ial backbone and service antennas.
SOFTWARE SOFTWARE
05
Software Systems: NetWay Manager
TM
SOFTWARE
SYSTEMS
88
The powerful network management solution. NetWay Manager is an SNMP based
management system designed to centrally
monitor and manage critical network inter-
connected devices such as Powerwave
repeaters, microwave radio links and
antenna line devices. It is available in an
Enterprise edition for small-to-medium
networks and in a Telecom edition for
medium-to-large networks offering:
Network status in real time
Synchronization of software and
other critical parameters through
the complete network
Based on open standards
Easy integration with third-party
SNMP-based elements
User friendly interfaces
Scalability and upgradeability
Reliable operation proven in field
In NetWay Manager you set up your
network management in a Client-server
configuration enabling distributed man-
agement. To the server a database can
be attached for storing fault, perform-
ance and inventory data. The database
can be available to higher order man-
agement systems. An FTP-server for
downloading new software into the ter-
minals can be connected as well as an
(S)NTP server.
SD, NDC, NC and CB are value adding
NetTools. Included in the telecom addi-
tion, options in the Enterprise edition.
90
Application Solution Specific:
Antenna/Remote Electrical Tilt (RET)
Multi-Carrier Power Amplifier (MCPA)
Tower Mounted Amplifiers (TMA)
Repeater/Distributed Antenna
Systems (DAS)
Integration Kits
Network Management Software Systems
Typical Course Outline for all Application Solutions:
Product Overview
System Integration
Installation
Commissioning
Troubleshooting
TRAI NI NG TRAI NI NG
05
CORPORATE
The power of knowledge from the power in wireless communications.
Powerwave University offers installation, commissioning,
and maintenance courses on-site and at strategically
located classrooms in Sweden, Hong Kong, and the
United States. Staffed with expert instructors with
proven field experience, your engineers, technicians,
and installers will find a comprehensive array of live and
electronic courses to assist them with planning,
installing, and commissioning Powerwaves products.
Education and Training
For information, locations and pricing, contact your regional sales manager
or visit our website: www.powerwave.com
To register for a class or learn more about a specific course, email us at:
[email protected]
Installation, Commissioning and Maintenance Courses

SERVI CE
05
Service and Warranties
CORPORATE
92
Powerwave has account representatives on-the-ground in 50 countries covering four continents.
How to Buy
PURCHASE
All Powerwave products include a stan-
dard factory warranty. The standard
coverage for a Powerwave product pur-
chased from a Powerwave Sales
Representative is:
One year warranty
Extended repair service from the
last date of delivery
RMA requests given within 24 hrs
Typical 10 day turnaround time for
all repairs
Powerwave warrants that the products
will be free from defects in material and
workmanship and will perform in accor-
dance with their published specifica-
tions for a period of 12 months following
shipment.
In addition, the Powerwave Coverage
System Innovations team provides cov-
erage guarantees for its turnkey cover-
age solutions. Each guarantee agree-
ment is customized to the projects
requirements.
Powerwave also has available to you
24/7 help desk support. For more
information about this service, please
contact your sales representative.
Worldwide Sales and Service:
www.powerwave.com
Or contact us by phone or email:
+1 888-PWR-WAVE (797-9283)
Worldwide Corporate Headquarters:
[email protected]
Main European Office:
[email protected]
Main Asia-Pacific Office:
[email protected]
South America Sales:
[email protected]
Powerwave has account representatives on-the-ground in 50 countries covering four continents.
POWERWAVE
94
About Powerwave
Powerwave Technologies, Inc., is
a global supplier of end-to-end
wireless solutions for wireless
communications networks.
Powerwave designs, manufac-
tures and markets antennas,
boosters, filters, repeaters, multi-
carrier RF power amplifiers and
tower-mounted amplifiers and
advanced coverage solutions,
all for use in 2G, 2.5G and 3G
networks throughout the world.
Sales by Region
Worldwide Corporate Headquarters
1801 East St. Andrew Place
Santa Ana, CA 92705 USA
+1 714 466 1000
+1 714 466 5800 FAX
[email protected]
Main European Office
Antennvgen 6
SE-187 80 Tby
Sweden
+46 8 540 822 00
+46 8 540 824 85 FAX
[email protected]
Main Asia-Pacific Office
23F Tai Yau Building
181 Johnston Road
Wanchai, Hong Kong
+852 2512 6123
+852 2575 4860 FAX
[email protected]
Brazil Sales
Rua Maria Figueiredo 374
04002-002
Sa
~
o Paulo, Brazil
+55 11 3889 6933/6930
+55 11 3889 6910/11 FAX
[email protected]
Contact Us
Customer service offered
24 hours a day
Customer service
[email protected]
+1 888-PWR-WAVE
(1-888-797-9283)
Technical Support - Americas
[email protected]
+1 888-PWR-WAVE ext. 3
(1-888-797-9283)
Technical Support - Asia pacific
[email protected]
Technical Support - Europe
[email protected]
+46 8-540-822-00
Quality and Environmental
Management System
Certifications
ISO9001
TL9000
TickIT-5
ISO14001
Copyright June 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
NetWay Manager, Clean Site and AMR Streamline are trademarks of Powerwave Technologies, Inc. All specifications are subject to change without notice; please contact your Powerwave representative for
current specifications. Powerwave Technologies, Inc. is an ISO9001 and TL9000 certified company.
D031-08412 REV. A 2/06
Powering the Next Wave of Growth in Wireless
www.powerwave.com

Antenas Allgon

Uploaded by

Copyright:

Available Formats

Antenas Allgon

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Antenas Allgon

Uploaded by

Copyright:

Available Formats

SPRI NG 2006 POWERWAVE PRODUCT GUI DE

LGP138nn 806-960/1710-1990 Female/Male >25 <0.1 Outdoor

COVERAGE SYSTEM I NNOVATI ONS

Installation, Commissioning and Maintenance Courses

You might also like