Scribd Logo
Upload

Welcome to Scribd!

  • 318 views

    CETCO - Insta-Vis Plus

    Uploaded by

    [email protected]
    MATERIAL SAFET DATA SHEET may be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. NFPA / HMIS: Health - 1, Fire - 1, Reactivity - 0, Specific Hazard - None DOT Class: Not a DOT / IMO Hazardous Material -- Not Regulated.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    CETCO - Insta-Vis Plus

    Uploaded by

    [email protected]
    318 views2 pages
    MATERIAL SAFET DATA SHEET may be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. NFPA / HMIS: Health - 1, Fire - 1, Reactivity - 0, Specific Hazard - None DOT Class: Not a DOT / IMO Hazardous Material -- Not Regulated.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MATERIAL SAFET DATA SHEET may be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. NFPA / HMIS: Health - 1, Fire - 1, Reactivity - 0, Specific Hazard - None DOT Class: Not a DOT / IMO Hazardous Material -- Not Regulated.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    318 views2 pages

    CETCO - Insta-Vis Plus

    Uploaded by

    [email protected]
    MATERIAL SAFET DATA SHEET may be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. NFPA / HMIS: Health - 1, Fire - 1, Reactivity - 0, Specific Hazard - None DOT Class: Not a DOT / IMO Hazardous Material -- Not Regulated.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MATERIAL SAFET DATA SHEET May be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200.

    Standard must be consulted for specific requirements


    66701/66701
    Page 1 of 2
    PRODUCT NAME: INSTA-VIS PLUS™
    Section I MANUFACTURER'S INFORMATION
    MANUFACTURER’S NAME & ADDRESS: Date Prepared: February 10, 2005
    CETCO – Drilling Products Group Telephone Number: 847-392-5800 Fax 847.506.6150
    1500 West Shure Drive EMERGENCY CONTACT: CHEMTREC 800-424-9300
    Arlington Heights, IL 60004 E-mail: www.cetco.com

    Section II HAZARDOUS INGREDIENTS/IDENTITY INFORMATION


    Hazardous Components Other Limits %
    (Specific Chemical Identity: Common Name(s)) OSHA PEL ACGIH TLV Recommended (optional)
    PETROLEUM SOLVENT NJ; TRADE SECRET REG #99783600-5148P
    SURFACTANT; NJ TRADE SECRET REG #99783600-5133P
    POLYOL; NJ TRADE SECRET REG #99783600-5134P
    PRODUCT IDENTIFICATION
    Chemical Name: Anionic acrylamide copolymer emulsion in hydrocarbon oil.
    NFPA/HMIS: Health - 1, Fire - 1, Reactivity - 0, Specific Hazard - None
    DOT Class: Not a DOT/IMO Hazardous Material -- Not Regulated

    Section III PHYSICAL/CHEMICAL CHARACTERISTICS


    Melting Point - Not Applicable Flash Point > 212˚F
    Vapor Pressure (mm Hg.) - 0.002 @ 68 ˚F Auto ignition Point: < 392 ˚F
    Vapor Density (AIR = 1) - See Technical Bulletin
    Solubility in Water - See Technical Bulletin
    Appearance and Odor - Viscous liquid, milky, aliphatic odor

    Section IV FIRE AND EXPLOSION HAZARD DATA


    Flash Point (Method Used) - > 212°F
    Flammable Limits - Not Available LEL- -Not Available UEL- -Not Available
    Extinguishing Media - Water, water spray, foam, dry powder, carbon dioxide
    Special Fire Fighting Procedures - Spills produce extremely slippery surfaces
    Unusual Fire / Explosion Hazards - No special protective equipment required

    Section V REACTIVITY DATA


    Stability Stable - Conditions to Avoid - None Known
    Incompatibility (Materials to Avoid) - Oxidizing agents may cause exothermic reactions.
    Hazardous Decomposition or By-products - Thermal decomposition: CO, CO2, and nitrogen oxides.
    Hazardous Polymerization Will Not Occur - Conditions to Avoid - None Known

    1500 W. Shure Dr., Arlington Heights, Illinois 60004 USA / +1 800.527.9948 / tel +1 847.392.5800 / fax +1 847.577.5571
    Copyright 2002 CETCO All rights reserved.
    CETCO is a wholly owned subsidiary of AMCOL International Corp.
    6670166701
    Page 2 of 2
    PRODUCT NAME: INSTA-VIS PLUS™
    Section VI HEALTH HAZARD DATA
    Route(s) of Entry: Inhalation? No Skin? No Ingestion? Yes Eye? Yes
    Health Hazards (Acute and Chronic): Oral: LD50/oral.rat > 5000 mg/kg. However, product is generally considered non-hazardous.
    Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No ACGIH? No
    Signs and Symptoms of Exposure: Irritating to the skin, irritating to the eyes, prolonged exposure to skin may cause dermatitis.
    Medical Conditions Generally Aggravated by Exposure: Dermatitis

    Section VI HEALTH HAZARD DATA CONTINUED


    Emergency and First Aid Procedures:
    Eyes: Flush with water for 15 minutes, consult physician
    Skin: Wash with soap and water. Remove contaminated clothes & wash
    Inhalation: Remove to fresh air, consult physician.
    Ingestion: DO NOT INDUCE VOMITING. Consult a physical if discomfort or other symptoms develop.

    Section VII PRECAUTIONS FOR SAFE HANDLING AND USE


    Steps to Be Taken in Case Material is Released or Spilled:
    Absorb with inert absorbent material. Put into container for disposal. DO NOT flush with water.
    Waste Disposal Method:
    Dispose of in accordance with federal, state and local regulations. This is not a RCRA regulated waste.
    Precautions to Be Taken in Handling and Storing:
    Store in a cool, dry place. Freezing will affect the physical condition and may damage the material.
    Other Precautions:
    Avoid forming dust/mist. Wash hands before breaks and at the end of the workday.

    Section VIII CONTROL MEASURES


    Respiratory Protection (Specify Type): Use NIOSH approved or equivalent if needed.
    Ventilation - Local Exhaust - As appropriate Special - None
    - Mechanical (General) - As appropriate Other - None
    Protective Gloves - Chemical Resistant
    Eye Protection - Safety goggles with side shields. No contact lenses.
    Other Protective Clothing or Equipment - Chemical resistant apron or suite if splashing repeatedly.
    Work/Hygienic Practices - Use good housekeeping practices.

    Section IX REGULATORY INFORMATION


    Proper Shipping Name: NOT A DOT/IMO HAZARDOUS MATERIAL
    ID Number: N/A RQ: N/A DOT Emergency Guide (ERG) #: 31
    Hazard Class or Division: N/A Packing Group: -
    TSCA List: Appears on TSCA Inventory
    No components are SARA 313 reportable.
    The information herein has been compiled from sources believed to be reliable and is accurate to the best of our knowledge.
    However, CETCO cannot give any guarantees regarding information from other sources, and expressly does not make any
    warranties, nor assumes any liability, for its use.

    1500 W. Shure Dr., Arlington Heights, Illinois 60004 USA / +1 800.527.9948 / tel +1 847.392.5800 / fax +1 847.577.5571
    Copyright 2002 CETCO All rights reserved.
    CETCO is a wholly owned subsidiary of AMCOL International Corp.

    You might also like