Scribd
Upload
130 views2 pages

On-Line Density Meter DC-400: Applications: Advantages

The On-line Density Meter DC-400 uses resonant method to precisely and quickly measure density and temperature of liquids with viscosities up to 100 cSt in production processes. It has a wide application range including petroleum, food, chemicals and can interface with a PC or PLC. The integrated temperature sensor allows for temperature compensation of measurements. When combined with the TDC-5 controller, it creates an automated process control system that manages technological processes through relay outputs.

Uploaded by

cparroyo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
130 views2 pages

On-Line Density Meter DC-400: Applications: Advantages

The On-line Density Meter DC-400 uses resonant method to precisely and quickly measure density and temperature of liquids with viscosities up to 100 cSt in production processes. It has a wide application range including petroleum, food, chemicals and can interface with a PC or PLC. The integrated temperature sensor allows for temperature compensation of measurements. When combined with the TDC-5 controller, it creates an automated process control system that manages technological processes through relay outputs.

Uploaded by

cparroyo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

On-line Density Meter DC-400

Advantages:
Wide application spectrum; Accurate measurement in seconds; Density measurements in wide viscosity range: up to 100 cSt; Automatic temperature compensation; Data transfer to PC or controller TDC-5; Easily engages into production process; Flexible results control.

Applications:
Crude oil and all petroleum products; Liquefied petroleum gases (LPG); Food products & beverages; Spirits; Cosmetics and pharmaceuticals; Chemicals.

Sensor Specifications Performances


Density range Temperature range Accuracy Density Temperature Density Temperature

Parameters
0.4200 g/cm3 - 1.6000 g/cm3 - 40 - +85 C 0.0005 g/cm3 0.5 C 0.0001 g/cm3 0.1 C Stainless steel IP68

Resolution

Contact surface material Environmental protection

Temperature compensation Automatic Power supply Liquid pressure Data transfer From 6.5 to 15 VDC 363 Psi (25 Bar) RS232, RS485, 4-20 mA EEx ia IIC T6

On-line Density Meter DC-400 is designed to measure density of liquid products with kinematic viscosity up to 100 cSt inside tanks. 240 mm Dimensions Height Resonant method provides precise density values in Length 100 mm seconds. Built-in temperature sensor allows 2.5 kg Weight temperature compensation and accurate temperature measurements. Wide application spectrum makes it flexible in operation of the technological process, where density measurements of the liquid products should be made. DC-400 affords two ways of obtained data processing: Windows-based software allows data transfer to PC and simplifies operation for personnel; Combined with controller TDC-5 it creates a modern process managing system, which can operate with different executive mechanisms via three included relay outputs. Safety approval

www.lemis-baltic.com

Controller for the DC-series sensors TDC-5


Automatic temperature compensation Digital/graphic display with backlight Values readout units Automatic zero adjustment No data loss when switched OFF Tied with DC-series sensors Automates your technological process Great manager Easy to operate

The controller is modern, microprocessor based instrument made as a management function for the DC series density sensors. Equipped with three relay outputs and combined with computer it allows you to automate and control technological process.

Controller Specifications Performances


AC Power supply Range Power consumption DC Power supply: Display resolution: Density Temperature Range 120/240 VAC, 50/60 Hz 96 - 256 VAC 10 VA 16 - 36 VDC 0.0001 g/cm3 0.1 C, 0.1 F Isolated 4 - 20 mA, direct or reverse-acting, configurable across full range Indication, relay, the output with programmable value of current in the range 4 - 20 mA. The mode of ALARM may be switched off. IRDA, RS485 100 VA, 240 VAC, 3A 50 W, 24 VDC, 3A Up to 2000 m without preamplifier 2 sec. typical, 4 sec. max. IP67 aluminum alloy 185 x 125 x 65 mm 1.5 kg

Parameters

Analog output ALARM

Combined with computer Relay outputs: Contact rating (max) AC DC

Maximum sensor cable length Turn on time Housing Dimensions Weight

Lemis Baltic 26 Ganibu dambis Str., Riga, LV-1005, LATVIA Tel: +371 7383223, fax: +371 7383270

www.lemis-baltic.com

You might also like