Scribd
Upload
67 views

5.0x7.0mm Surface Mount LVDS Clock Oscillator Series: Description Features

Connor-Winfield LMxxx LM 155. 123 - Series are 5x7.0mm 2MHz surface mount, LVDS, Fixed Frequency Crystal Controlled Oscillator. Designed for applications requiring tight frequency stability, wide temperature range and low jitter. Surface Mount package is designed for high-density mounting and is optimum for mass production.

Uploaded by

Ricky Cox
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
67 views

5.0x7.0mm Surface Mount LVDS Clock Oscillator Series: Description Features

Connor-Winfield LMxxx LM 155. 123 - Series are 5x7.0mm 2MHz surface mount, LVDS, Fixed Frequency Crystal Controlled Oscillator. Designed for applications requiring tight frequency stability, wide temperature range and low jitter. Surface Mount package is designed for high-density mounting and is optimum for mass production.

Uploaded by

Ricky Cox
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

5.0x7.

0mm Surface Mount LVDS Clock Oscillator Series


Description
Model SpecificationsFeatures:
C W 0846 The Connor-Winfield LMxxx LM 155.5 123 - Series are 5x7.0mm 2MHz Surface Mount, LVDS, Fixed Frequency Crystal Controlled Oscillator (XO). Through the use of multiplication, the LMxxx - Series are designed for applications requiring tight frequency stability, wide temperature range and low jitter. Operating at 2.5V or 3.3V supply voltage, the LMxxx Series provides LVDS Differential Outputs with enable / disable function. The surface mount package is designed for high-density mounting and is optimum for mass production.

Model LMxxx - Series


5.0 x7.0mm Surface Mount Package 2.5V or 3.3V Operation LVDS Output Logic Frequency Stabilities Available: LM14x / LM34x / LM44x: +/-20ppm LM11x / LM31x / LM41x: +/-25ppm LM12x / LM22x / LM32x / LM42x: +/-50ppm LM13x / LM23x / LM33x / LM43x: +/-100ppm Temperature Ranges Available: LM1xx Series: 0 to 70C LM2xx Series: -40 to 85C LM3xx Series: 0 to 85C LM4xx Series: -20 to 70C Low Jitter <1pS RMS Tri-State Enable/Disable Tape and Reel Packaging RoHS Compliant / Lead Free

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com

US Headquarters: 630-851-4722 European Headquarters: +353-61-472221

Model Specifications
Absolute Maximum Ratings
Parameter Storage Temperature Supply Voltage Input Voltage (Vcc) Units Minimum -55 -0.5 -0.5 Nominal Maximum 125 4.6 Vcc+0.5 Units C Vdc Vdc Table 2.0 (Fo) Minimum 100 Nominal Maximum 670 Units MHz ppm ppm ppm ppm C C C C Vdc Vdc mA ps RMS ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc Table 3.0 Minimum (Vil) (Vih) 0.7Vcc Nominal Note Table 1.0 Note

Operating Specifications
Parameter Center Frequency Total Frequency Tolerance Model LMx4x (See Table 9) Model LMx1x (See Table 9) Model LMx2x (See Table 9) Model LMx3x (See Table 9) Operating Temperature Range Model LM1xx Model LM4xx Model LM3xx Model LM2xx Supply Voltage Model LMxx2 Model LMxx3 Supply Current Period Jitter Phase Jitter- BW=12KHz to 20MHz SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset Sub-Harmonics (See Table 9) (See Table 9) (Icc) (See Table 9) (See Table 9) (See Table 9) (See Table 9) (Vcc) 2.375 3.135 2.500 3.3 60 3 0.6 -40 -75 -95 -110 -115 -60 2.625 3.465 90 5 1.0 -50 0 -20 0 -40 70 70 85 85

(See Table 9 for full part number) -20 20 -25 25 -50 50 -100 100

1 1 1 1

Input Characteristics
Parameter Disable Input Voltage (Low) Enable Input Voltage (High)

Nominal 700 50 0.3

Maximum 0.3Vcc -

Units Vdc Vdc

Note 2 2 Table 4.0

LVDS Output Characteristics


Parameter LOAD Output Differential Voltage (Vod) Output Swing (Differential Output peak to peak) (Vopp) Duty Cycle measured at 50% Differential Rise / Fall Time 20% to 80% Minimum 250 500 45 Maximum 100 450 900 55 0.7 Units Ohms mV mV % ns

Note 3 4

Bulletin Page Revision Date

Ds030 1 of 2 P01 24 Sep 2009

Notes
1) 2) 3) 4) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. Vod measured with 100 ohm resistor between the true output and the complementary output. Duty Cycle measured at 50% of output swing.

Specifications subject to change without notice. All dimensions in inches. Copyright 2008 The Connor-Winfield Corporation

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Ordering Information Package Outline

LM
Type: LVDS Clock Series 5x7mm

1
Temperature Range: 1 = 0 to 70 C 2 = -40 to 85 C 3 = 0 to 85 C 4 = -20 to 70 C

2
Frequency Stability: 4 = +/-20 ppm^ 1 = +/-25 ppm^ 2 = +/-50 ppm 3 = +/-100 ppm

3
Supply Voltage: 2 = 2.5Vdc. 3 = 3.3Vdc.

155.52M
Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz

0.275
(7.0mm)

0.197
(5.0mm)

CW 0846 LM123 155.52M

^ Models LM212, LM213, LM242 and LM243 are not currently available. Example: LM123-155.52M = LVDS Clock, 0 to 70C, +/-50ppm, 3.3Vdc @ 155.52 MHZ

0.069
(1.75mm)

Package Characteristics

Package Soldering Process


Vibration: Shock: Soldering: Solderability

Table 5.0 Hermetically sealed ceramic package and metal cover. RoHS compliant, see solder profile on page 2.

Suggested Pad Layout

Environmental Characteristics

Table 6.0 Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. SMD product suitable for Convection Reflow soldering. Peak temperature 260C. Maximum time above 220C, 60 seconds. Solderability per Mil Std 883E Method 2003
LVDS Output Waveform
Table 8.0 Enable / Disable Function (Pad 1) High or Open Low Output Enable Disable (High Impedance)
Q Vod Q Differential Output Waveform peak-to-peak 80% 0V tr tf 0V 20% Vod Duty Cycle

Pad Connections - Enable / Disable Function


Pad 1 2 3 4 5 6 Table 7.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc

Vopp 0V

Model Matrix

Table 9.0 Frequency Frequency Frequency Frequency Supply Temperature Tolerance Tolerance Tolerance Tolerance Voltage Range 20ppm 25ppm 50ppm 100ppm LM142 LM112 LM122 LM132 2.5Vdc 0 to 70C LM442 LM412 LM422 LM432 2.5Vdc -20 to 70C LM342 LM312 LM322 LM332 2.5Vdc 0 to 85C x x LM222 LM232 2.5Vdc -40 to 85C LM143 LM113 LM123 LM133 3.3Vdc 0 to 70C LM443 LM413 LM423 LM433 3.3Vdc -20 to 70C LM343 LM313 LM323 LM333 3.3Vdc 0 to 85C x x LM223 LM233 3.3Vdc -40 to 85C X = Models LM212, LM213, LM242 and LM243 are not currently available. Tape and Reel Specifications

Test Circuit
Vcc

Power Supply
Ground 0.01uF

100 ohm

Q Enable/ Disable or N/C

Solder Profile
Temperature 260C 220C 180C 150C 120C

260C

0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max.

US Headquarters: 630-851-4722 European Headquarters: +353-61-472221


Specifications subject to change without notice. All dimensions in inches. Copyright 2008 The Connor-Winfield Corporation

Bulletin Page Revision Date

Ds030 2 of 2 P01 24 Sep 2009

You might also like