Users Guide

Dell U2414H

Model No.: U2414H Regulatory model: U2414Hb

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

____________________
Information in this document is subject to change without notice. 2013 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft. Corporation in the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. 2013 - 10 Rev. A00

Contents
1 About Your Monitor .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5
5 6 7 10 19 20 21 22

Package Contents . . . . . . . . . . . . . Product Features . . . . . . . . . . . . . . Identifying Parts and Controls . . . . . Monitor Specifications . . . . . . . . . . Plug and Play Capability . . . . . . . . . Universal Serial Bus (USB) Interface . LCD Monitor Quality and Pixel Policy Maintenance Guidelines . . . . . . . . .

Setting Up the Monitor

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23
23 23 29 30 30 31 31

Attaching the Stand . . . . . . . Connecting Your Monitor . . . Organizing Your Cables . . . . Attaching the Cable Cover . . Removing the Monitor Stand . Removing the Cable Cover . . Wall Mounting (Optional) . . .

Operating the Monitor

. . . . . . . . . . . . . . . . . .

33
33 33 35 49 49 54

Power On the Monitor . . . . . . . . . . . . . . . . . . . . Using the Front Panel Controls . . . . . . . . . . . . . . Using the On-Screen Display (OSD) Menu . . . . . . . Setting the Maximum Resolution. . . . . . . . . . . . . . . . . . Using the Tilt, Swivel, and Vertical Extension . . . . . Adjusting the Rotation Display Settings of Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting.

. . . . . . . . . . . . . . . . . . . . . . .

55
55 56 57 59 60

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . Common Problems . . . . . . . . . . . . . . . . . . . . . . Product Specific Problems . . . . . . . . . . . . . . . . . Universal Serial Bus (USB) Specific Problems. . . . . . . .

Contents

Mobile High-Definition Link (MHL) Specific Problems . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

60

Appendix .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61

FCC Notices (U.S. Only) and Other Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . 61 Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Contents

About Your Monitor

Package Contents
Your monitor ships with the components shown below. Ensure that you have received all the components and Contacting Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.

Monitor

Stand

Cable Cover

Power Cable (Varies by Countries)

About Your Monitor

 DP Cable (Mini-DP to DP)

USB 3.0 Upstream Cable (Enables the USB Ports on the Monitor)

Drivers and Documentation Media Quick Setup Guide Product and Safety Information Guide

Product Features
The Dell U2414H flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include: U2414H: 60.47 cm (23.8-inch) viewable area display (measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions. Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side. Tilt, swivel, vertical extension and rotate adjustment capabilities. Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier set up with an elegant viewing experience. Removable stand and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions. Extensive all digital connectivity with DisplayPort, mini DisplayPort, HDMI (MHL), USB 3.0 helps future proof your monitor. Plug and play capability if supported by your system. Color gamut of 96% sRGB (CIE1931) with an average Delta E of <4. On-Screen Display (OSD) adjustments for ease of set-up and screen optimization. Software and documentation media includes an Information File (INF), Image Color Matching File (ICM), and product documentation. Dell Display Manager Software included (comes in the CD shipped with the monitor).

About Your Monitor

Energy Saver feature for Energy Star compliance. Security lock slot. Stand lock. Capability to switch from wide aspect to standard aspect ratio while maintaining the image quality. EPEAT Gold Rating. U2414H monitor is BFR/PVC-free (Halogen-free) excluding external cables. TCO-Certified Displays. Meets NFPA 99 leakage current requirements. Arsenic-Free glass and Mercury-Free for the panel only. High Dynamic Contrast Ratio (2,000,000:1). 0.5 W standby power when in the sleep mode. Energy Gauge shows the energy level being consumed by the monitor in real time.

Identifying Parts and Controls

Front View

Front panel controls Label 1 2 Description Function buttons (For more information, see Operating the Monitor) Power On/Off button (with LED indicator)

About Your Monitor

Back View

Back View with monitor stand Label 1 Description VESA mounting holes (100 mm x 100 mm - behind attached VESA Cover) Regulatory label Stand release button Security lock slot Barcode serial number label USB downstream port Use Wall mount monitor using VESAcompatible wall mount kit (100 mm x 100 mm). Lists the regulatory approvals. Releases stand from monitor. Secures monitor with security lock (security lock not included). Refer to this label if you need to contact Dell for technical support. Connects your USB device. You can only use this connector after you have connected the USB cable to the computer and USB upstream connector on the monitor. Uses to organize cables by placing them through the slot.

2 3 4 5 6

Cable management slot

About Your Monitor

Side View

Bottom View

Bottom view without monitor stand Label 1 2 3 4 5 Description AC power cord connector Dell Soundbar mounting slots DP in connector Mini DisplayPort in connector DisplayPort out (MST) connector Use Connect the power cable. Attach the optional Dell Soundbar. (Concealed below removable plastic sheets) Connect your computer with DP cable. Connect your computer with Mini-DP to DP cable. DisplayPort output for MST (Multi-Stream Transport) capable monitor. DP 1.1 monitor can only be connected as the last monitor in the MST chain. To enable MST, refer to instruction on section "Connecting the monitor for DP Multi-Stream Transport (MST) function".

About Your Monitor

6 7 8

HDMI (MHL) port connector Audio-Line out USB upstream port

Connect your MHL devices with MHL cable. Connect your speakers*. Connect the USB cable that came with your monitor to the computer. Once this cable is connected, you can use the USB connectors on the monitor. Connect your USB device. You can only use this connector after you have connected the USB cable to the computer and USB upstream connector on the monitor. To lock the stand to the monitor using a M3 x 6 mm screw (screw not included).

USB downstream port

10

Stand lock feature

* Headphone usage is not supported for the audio line out connector.

Monitor Specifications
Flat Panel Specifications
Model Screen type Panel type Viewable image Diagonal Horizontal, Active Area Vertical, Active Area Area Pixel pitch Viewing angle Luminance output Contrast ratio Faceplate coating Backlight Response time 604.70 mm (23.8 inches) 527.04 mm (20.75 inches) 296.46 mm (11.67 inches) 156246.28 mm2 (242.18 inch2) 0.2745 mm 178 (vertical) typical 178 (horizontal) typical 250 cd/m (typical) 1000 to 1 (typical) 2M to 1 (typical Dynamic Contrast On) Anti-Glare with 3H hardness LED edgelight system 8 ms (typical) with Overdrive U2414H Active matrix - TFT LCD In Plane Switching

10

About Your Monitor

Color depth Color gamut

16.77 million colors CIE1976 (85%), CIE 1931* (72%)

* [U2414H] sRGB coverage is 96%.

Resolution Specifications
Model Horizontal scan range Vertical scan range U2414H 30 kHz to 83 kHz (automatic) 56 Hz to 76 Hz (automatic)

Maximum preset resolution 1920 x 1080 at 60 Hz

Supported Video Modes

Model Video display capabilities (HDMI & DP playback) U2414H 480p, 480i, 576p, 720p, 1080p, 576i, 1080i

Preset Display Modes

Display Mode Horizontal Frequency (kHz)
31.5 31.5 37.5 37.9 46.9 48.4 60.0 67.5 64.0 80.0 75.0 67.5

Vertical Frequency (Hz)

70.1 60.0 75.0 60.3 75.0 60.0 75.0 75.0 60.0 75.0 60.0 60.0

Pixel Clock (MHz)

28.3 25.2 31.5 40.0 49.5 65.0 78.8 108.0 108.0 135.0 162.0 148.5

Sync Polarity (Horizontal/ Vertical)

-/+ -/-/+/+ +/+ -/+/+ +/+ +/+ +/+ +/+ +/+

VESA, 720 x 400 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1600 x 1200 VESA, 1920 x 1080

About Your Monitor

11

MHL Source Display Modes

Display Mode
640 x 480p 720 x 480p 720 x 576p 1280 x 720p 1280 x 720p 1920 x 1080i 1920 x 1080i 1920 x 1080p 1920 x 1080p 1920 x 1080p 720 (1440) x 480i 720 (1440) x 576i

Frequency (Hz)
60 60 50 60 50 60 50 30 60 50 60 50

Electrical Specifications
Model Video input signals U2414H HDMI 1.4 (MHL 2.0)*, 600mV for each differential line, 100 ohm input impedance per differential pair DisplayPort 1.2**, 600mV for each differential line, 100 ohm input impedance per differential pair 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (typical) 120 V: 42 A (Max.) at 0 C (cold start) 240 V: 80 A (Max.) at 0 C (cold start)

AC input voltage/frequency/ current Inrush current

* Not Support HDMI 1.4 optional specification, include HDMI Ethernet Channel (HEC), Audio Return Channel (ARC), standard for 3D format and resolutions, standard for 2K and 4K digital cinema resolution. ** Support DP1.2 (CORE) specification, include HBR2, MST and DP audio.

12

About Your Monitor

Physical Characteristics
Model Connector type Signal cable type U2414H DP, black connector (include DP in and DP out); Mini DisplayPort; HDMI (MHL); USB 3.0 Digital: detachable, HDMI, 19 pins Digital: detachable, MHL, 19 pins Digital: detachable, Mini-DP to DP, 20 pins Universal Serial Bus: detachable, USB, 9 pins 485.8 mm (19.12 inches) 355.8 mm (14.00 inches) 539.1 mm (21.23 inches) 185.0 mm (7.28 inches) 321.1 mm (12.64 inches) 539.1 mm (21.23 inches) 45.6 mm (1.80 inches) 399.8 mm (15.74 inches) 353.9 mm (13.93 inches) 225.0 mm (8.86 inches) 185.0 mm (7.28 inches) 8.00 kg (17.62 lb) 5.76 kg (12.68 lb) 3.61 kg (7.95 lb)

Dimensions (with stand) Height (extended) Height (compressed) Width Depth Dimensions (without stand) Height Width Depth Stand dimensions Height (extended) Height (compressed) Width Depth Weight Weight with packaging Weight with stand assembly and cables Weight without stand assembly (For wall mount or VESA mount considerations no cables) Weight of stand assembly Front frame gloss

1.85 kg (4.07 lb) Black Frame - 5.0 gloss unit (max.)

About Your Monitor

13

Environmental Characteristics
Model Temperature Operating Non-operating Humidity Operating Non-operating Altitude Operating Non-operating Thermal dissipation 5,000 m (16,400 ft) (maximum) 12,192 m (40,000 ft) (maximum) 250.99 BTU/hour (maximum) 54.20 BTU/hour (typical) 10% to 80% (non-condensing) Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing) 0 C to 40 C (32 F to 104 F) Storage: -20 C to 60 C (-4 F to 140 F) Shipping: -20 C to 60 C (-4 F to 140 F) U2414H

Power Management Modes

If you have VESA's DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature. VESA Modes
Normal operation Active-off mode Switch off

Horizontal Sync
Active Inactive -

Vertical Sync
Active Inactive -

Video
Active Blanked -

Power Indicator
White White (Breathing) Off

Power Consumption
74 W (maximum)** 16 W (typical) Less than 0.5 W Less than 0.5 W

The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed:

14

About Your Monitor

or

Activate the computer and the monitor to gain access to the OSD.

NOTE: This monitor is ENERGY STAR-compliant. * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ** Maximum power consumption with max luminance, and USB active.

About Your Monitor

15

Pin Assignments
DisplayPort Connector

Pin Number

20-pin Side of the Connected Signal Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

ML0(p) GND ML0(n) ML1(p) GND ML1(n) ML2(p) GND ML2(n) ML3(p) GND ML3(n) GND GND AUX(p) GND AUX(n) GND Re-PWR +3.3 V DP_PWR

16

About Your Monitor

Mini DisplayPort Connector

Pin Number

20-pin Side of the Connected Signal Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

GND Hot Plug Detect ML3(n) GND ML3(n) GND GND GND ML2(n) ML0(p) ML2(p) ML0(p) GND GND ML1(n) AUX(p) ML1(p) AUX(n) GND +3.3 V DP_PWR

About Your Monitor

17

HDMI Connector

Pin Number

19-pin Side of the Connected Signal Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0TMDS CLOCK+ TMDS CLOCK SHIELD TMDS CLOCKCEC Reserved (N.C. on device) DDC CLOCK (SCL) DDC DATA (SDA) DDC/CEC Ground +5V POWER HOT PLUG DETECT

18

About Your Monitor

MHL Connector

Pin Number

19-pin Side of the Connected Signal Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2TMDS DATA 1+ GND TMDS DATA 1MHL+ TMDS DATA 0 SHIELD MHLTMDS CLOCK+ GND TMDS CLOCKCEC Reserved (N.C. on device) DDC CLOCK (SCL) DDC DATA (SDA) GND VBUS (+5V, 900mA maximum) CBUS

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.

About Your Monitor

19

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the monitor. NOTE: This monitor is Super-Speed USB 3.0 compatible.

Transfer Speed
Super-speed High speed Full speed

Data Rate
5 Gbps 480 Mbps 12 Mbps

Power Consumption*
4.5 W (Max, each port) 4.5 W (Max, each port) 4.5 W (Max, each port)

* Up to 2A on USB downstream port (port with compliance devices or normal USB devices.

lightning icon) with BC1.2

USB Upstream Connector

Pin Number
1 2 3 4 5 6 7 8 9

9-pin Side of the Connector

VCC DD+ GND SSTXSSTX+ GND SSRXSSRX+

20

About Your Monitor

USB Downstream Connector

Pin Number
1 2 3 4 5 6 7 8 9

9-pin Side of the Connector

VCC DD+ GND SSTXSSTX+ GND SSRXSSRX+

USB Ports
1 upstream - back 4 downstream - back Power Charging Port- the port with lightning icon; supports fast current charging capability if the device is BC1.2 compatible. NOTE: USB 3.0 functionality requires a USB 3.0-capable computer. NOTE: The monitor's USB interface works only when the monitor is On or in the power save mode. If you turn Off the monitor and then turn it On, the attached peripherals may take a few seconds to resume normal functionality.

LCD Monitor Quality and Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: http://www.dell.com/support/monitors.

About Your Monitor

21

Maintenance Guidelines
Cleaning Your Monitor
CAUTION: Read and follow the Safety Instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor. If you notice white powder when you unpack your monitor, wipe it off with a cloth. Handle your monitor with care as a darker-colored monitor may get scratched and show white scuff marks more than a lighter-colored monitor. To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn Off your monitor when not in use.

22

About Your Monitor

Setting Up the Monitor

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set up instructions.

To attach the monitor stand: 1. 2. 3. Remove the cover and place the monitor on it. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor. Press the stand till it snaps into place.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. To connect your monitor to the computer: 1. Turn Off your computer and disconnect the power cable. Connect the DP/Mini-DP to DP/HDMI/MHL cable from your monitor to the computer.

Setting Up the Monitor

23

Connecting the HDMI cable

Connecting the MHL cable

Connecting the black DisplayPort (Mini-DP to DP) cable

24

Setting Up the Monitor

Connecting the black DisplayPort (DP to DP) cable

Connecting the monitor for DP Multi-Stream Transport (MST) function

NOTE: U2414H supports the DP MST feature. To make use of this feature, your PC Graphics Card must be certified to DP1.2 with MST option. The default out of factory setting in the U2414H is DP1.1a. To enable MST connection, please use only DP cable as provided in box (or other DP1.2 certified cable) and change the DP setting to DP1.2 by performing the below steps: A) Monitor is able to show content 1. Use OSD button to navigate to Display Settings.

Setting Up the Monitor

25

2. 3. 4.

Go to DisplayPort 1.2 selection. Select Enable or Disable accordingly Follow the screen message to confirm selection of DP1.2 or DP1.1a.

26

Setting Up the Monitor

B) Monitor fails to show any content (blank screen) 1. Use the and button to highlight DisplayPort or Mini DisplayPort.

2. 3.

Press and hold the

button for approximately 8 seconds.

The DisplayPort configuration message will appear:

4.

Use the changes.

button to enable DP1.2 or

button to exit without making any

Repeat the above steps to change the setting back to DP 1.1a if necessary. CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Setting Up the Monitor |

27

Connecting the USB 3.0 cable

After you have completed connecting the Mini-DP to DP/DP/HDMI cable, follow the procedures below to connect the USB 3.0 cable to the computer and complete your monitor setup: 1. 2. 3. 4. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port on your computer. (See Bottom View for details.) Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor. Plug the power cables for your computer and monitor into a nearby outlet. Turn On the monitor and the computer. If your monitor displays an image, installation is complete. If it does not display an image, see Universal Serial Bus (USB) Specific Problems. Use the cable slot on the monitor stand to organize the cables.

5.

Using the (MHL) Mobile-High Definition Link

NOTE: This monitor is MHL certified. NOTE: To use the MHL function, use only MHL certified cable and source devices that support MHL output. NOTE: Some MHL source devices may take more than a few seconds or longer to output an image, depending on MHL source devices. NOTE: When the connected MHL source device enters Standby mode, the monitor will display black screen or show the massage below, depending on MHL source device's output.

To enable MHL connection, please perform the below steps:

28

Setting Up the Monitor

1. 2.

Plug the power cable on your monitor into a AC outlet. Connect the (micro) USB port on you MHL source device to HDMI (MHL) 1 or HDMI (MHL) 2 port on the monitor with a MHL certified cable (See Bottom View for details.) Turn On the monitor and the MHL source device.

3.

4. 5.

Select input source on monitor to HDMI (MHL) 1 or HDMI (MHL) 2 by using OSD Menu (See Using the On-Screen Display (OSD) Menu for details.) If it does not display an image, see Mobile High-Definition Link (MHL) Specific Problems.

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) organize all cables as shown above.

Setting Up the Monitor

29

Attaching the Cable Cover

NOTE: The cable cover is detached when the monitor is shipped from the factory.

1. 2.

Fit the two tabs on the bottom part of the cable cover to the groove on the back of the monitor. Press the cable cover till it snaps into place.

Removing the Monitor Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions.

To remove the stand: 1. 2. 3. Place the monitor on a soft cloth or cushion. Press and hold the stand release button. Lift the stand up and away from the monitor | Setting Up the Monitor

30

Removing the Cable Cover

1. 2.

Press the tab on the cable cover. Remove the two tabs on the bottom part of the cable cover from the groove on the back of the monitor.

Wall Mounting (Optional)

(Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA-compatible wall mounting kit. 1. 2. 3. 4. Place the monitor panel on a soft cloth or cushion on a stable, flat table. Remove the stand. Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover. Attach the mounting bracket from the wall mounting kit to the monitor.

Setting Up the Monitor

31

5.

Mount the monitor on the wall by following the instructions that comes with the wall mounting kit. NOTE: For use only with UL-listed wall mount bracket with minimum weight/load bearing capacity of 5.88 kg.

32

Setting Up the Monitor

3
Press the

Operating the Monitor

Power On the Monitor

button to turn On the monitor.

Using the Front Panel Controls

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.

The following table describes the front panel buttons: Front Panel Button
1

Description
Use this button to choose from a list of preset color modes.

Shortcut key/ Preset Modes

Operating the Monitor

33

Use this button to directly access the Brightness/Contrast menu.

Shortcut key/ Brightness/Contrast

3 Use the MENU button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the Menu System. Use this button to go back to the main menu or exit the OSD main menu.

Menu
4

Exit
5 Use the Power button to turn the monitor On and Off. The white light indicates the monitor is On and fully functional. A breathing white light indicates the power save mode.

Power (with power light indicator)

Front Panel Button

Use the buttons on the front of the monitor to adjust the image settings.

Front Panel Button

1

Description
Use the Up button to adjust (increase ranges) items in the OSD menu.

Up
2 Use the Down button to adjust (decrease ranges) items in the OSD menu.

Down
3 Use the OK button to confirm your selection.

OK
4 Use the Back button to go back to the previous menu.

Back

34

Operating the Monitor

Using the On-Screen Display (OSD) Menu

Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1. Press the button to launch the OSD menu and display the main menu.

Main Menu for digital (HDMI (MHL) 1/ HDMI (MHL) 2) input

or Main Menu for digital (mini DisplayPort) input

Operating the Monitor

35

or Main Menu for digital (DP) input

2.

Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor. Press the Press and button once to activate the highlighted option. button to select the desired parameter. buttons, according

3. 4. 5. 6.

Press to enter the slide bar and then use the and to the indicators on the menu, to make your changes. Select the button to return to the main menu.

36

Operating the Monitor

Icon

Menu and Submenus

Description

Brightness/ Use this menu to activate Brightness/Contrast adjustment. Contrast

Brightness

Brightness adjusts the luminance of the backlight. Press the button to increase the brightness and press the button to decrease the brightness (min. 0 / max. 100).

NOTE: Manual adjustment of Brightness is disabled when Dynamic

Contrast is switched On.

Contrast

Adjust the Brightness first, and then adjust the Contrast only if further adjustment is necessary. Press the button to increase the contrast and press the button to decrease the contrast (min. 0 / max. 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.

Operating the Monitor

37

Input Source

Use the Input Source menu to select between the different video signals that may be connected to your monitor.

Auto Select DisplayPort

Press to select Auto Select, the monitor scans for available input sources. Select the DisplayPort input when you are using the DisplayPort (DP) connector. Press to select the DisplayPort input source. DisplayPort (Mini DP) connector. Press DisplayPort input source. to select the Mini

Mini DisplayPort Select the Mini DisplayPort input when you are using the Mini

HDMI (MHL) 1 HDMI (MHL) 2

Select the HDMI (MHL) 1 or HDMI (MHL) 2 input when you are using the HDMI connectors. Press to select the HDMI (MHL) 1 or HDMI (MHL) 2 input source.

Color Settings Use Color Settings to adjust the color setting mode.

38

Operating the Monitor

Input Color Format

Allows you to set the video input mode to: RGB: Select this option if your monitor is connected to a computer (or DVD player) using the HDMI cable (or DisplayPort cable); or MHL devices using MHL cable. YPbPr: Select this option if your monitor is connected to a DVD player by YPbPr using HDMI cable (or DisplayPort cable); or MHL devices by YPbPr using MHL cable. Or if the DVD (or MHL devices) color output setting is not RGB.

Gamma

Allows you to set the Gamma to PC or MAC.

Operating the Monitor

39

Preset Modes

When you select Preset Modes, you can choose Standard, Multimedia, Movie, Game, Paper, Color Temp., sRGB or Custom Color from the list. Standard: Loads the monitor's default color settings. This is the default preset mode. Multimedia: Loads color settings ideal for multimedia applications. Movie: Loads color settings ideal for movies. Game: Loads color settings ideal for most gaming applications. Paper: Loads brightness and sharpness settings ideal for viewing text. Blend the text background to simulate paper media without affecting color images. Applies to RGB input format only. Color Temp.: Allows users to select the color temperature: 5000K, 5700K, 6500K, 7500K, 9300K and 10000K. sRGB: Emulates 72 % NTSC color. Custom Color: Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G,

B) values and create your own preset color mode.

NOTE: Accuracy of sRGB is optimized for RGB input color format. Hue
This feature can shift the color of the video image to green or purple. This is used to adjust the desired flesh tone color. Use or to adjust the hue from '0' to '100'. Press Press to increase the green shade of the video image. to increase the purple shade of the video image.

NOTE: Hue adjustment is available only when you select Movie or

Game preset mode.

40

Operating the Monitor

Saturation

This feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'. Press image. Press to increase the monochrome appearance of the video to increase the colorful appearance of the video image.

NOTE: Saturation adjustment is available only when you select

Movie or Game preset mode.

Reset Color Settings

Reset your monitor color settings to the factory settings.

Display Settings Use the Display Settings to adjust image.

Aspect Ratio Sharpness

Adjusts the image ratio to Wide 16:9, 4:3, or 5:4. This feature can make the image look sharper or softer. Use to adjust the sharpness from '0' to '100'. or

Dynamic Contrast

Allows you to increase the level of contrast to provide sharper and more detailed image quality. Press the button to select the Dynamic Contrast "On" or "Off".

NOTE: Dynamic Contrast provides higher contrast if you select

Game or Movie preset mode.

DisplayPort 1.2 Press

to enable or disable DisplayPort 1.2.

To use the DP MST (Daisy Chain) or HBR2 feature, enable DP 1.2.

NOTE: Ensure your Graphics Card can support these features before
selecting DP 1.2. Wrong setting may result in blank screen. Some Graphics Cards do not support MCCS (Monitor Control Command Set) at DP 1.2. In these cases, DDM (Dell Display Manager) may not run.

Reset Display Settings

Select this option to restore default display settings.

Operating the Monitor

41

Energy Settings

USB

Allows you to enable or disable USB function during monitor standby mode.

NOTE: USB ON/OFF under standby mode is only available when the USB upstream cable is unplugged. This option will be greyed out when the USB upstream cable plugs in. Power Button LED Reset Energy Settings
Allows you to set the power LED indicator On or Off to save energy. Select this option to restore default Energy Settings.

42

Operating the Monitor

Menu Settings Select this option to adjust the settings of the OSD, such as, the
languages of the OSD, the amount of time the menu remains on screen, and so on.

Language

Language options set the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese or Japanese). Rotates the OSD by 90 degrees counter-clockwise. You can adjust the menu according to your Display Rotation. Select this option to change the menu transparency by pressing the and buttons (Minimum: 0 ~ Maximum: 100). OSD Hold Time: sets the length of time the OSD will remain active after the last time you pressed a button. Use or to 60 seconds. to adjust the slider in 1 second increments, from 5

Rotation Transparency

Timer

Lock

Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.

NOTE:
Lock function Either soft lock (through the OSD menu) or hard lock (press and hold the button beside the power button for 10 seconds) Unlock function Only hard unlock (press and hold the button beside the power button for 10 seconds)

Reset Menu Settings

Reset all OSD settings to the factory preset values.

Operating the Monitor

43

Other Settings

Button Sound DDC/CI

The monitor beeps everytime a new option is selected in the menu. This feature enables or disables the sound. DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance, and etc.) to be adjustable via the software on your computer. You can disable this feature by selecting Disable. Enable this feature for best user experience and optimum performance of your monitor.

44

Operating the Monitor

LCD Conditioning

Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting Enable.

Reset Other Settings Factory Reset Personalize

Reset all settings under the Other Settings menu to the factory preset values. Reset all settings to the factory preset values. Users can choose a feature from Preset Modes, Brightness/ Contrast, Input Source, Aspect Ratio, or Rotation and set it as a shortcut key.

NOTE: This monitor has a built-in feature to automatically calibrate the brightness to compensate for LED aging.

Operating the Monitor

45

OSD Warning Messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled.

When the monitor does not support a particular resolution mode, you will see the following message:

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080. You will see the following message before the DDC/CI function is disabled:

46

Operating the Monitor

When the monitor enters the Power Save mode, the following message appears:

Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, one of the following messages will appear depending on the selected input: HDMI (MHL)/Mini DisplayPort/DP input

or

If either HDMI (MHL), Mini DisplayPort, or DP input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears.

or

Operating the Monitor

47

or

or

See Troubleshooting for more information.

48

Operating the Monitor

Setting the Maximum Resolution

To set the maximum resolution for the monitor: In Windows 7, Windows 8, and Windows 8.1: 1. 2. 3. 4. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. Right-click on the desktop and click Screen Resolution. Click the Dropdown list of the Screen Resolution and select 1920 x 1080. Click OK.

If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures: If you have a Dell desktop or portable computer: Go to http://www.dell.com/support, enter your service tag, and download the latest driver for your graphics card. Go to the support site for your computer and download the latest graphic drivers. Go to your graphics card website and download the latest graphic drivers.

If you are using a non-Dell computer (portable or desktop):

Using the Tilt, Swivel, and Vertical Extension

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.

Tilt, Swivel
With the stand attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle.

NOTE: The stand is detached when the monitor is shipped from the factory. Operating the Monitor |

49

Vertical Extension
NOTE: The stand extends vertically up to 130 mm. The figure below illustrates how to extend the stand vertically.

Rotating the Monitor

Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted up to avoid hitting the bottom edge of the monitor.

50

Operating the Monitor

Rotate clockwise

Rotate counterclockwise

Operating the Monitor

51

Reverse (180) mount NOTE: To reverse (180) mount, remove the stand and use wall mounting solution (optional).

NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to www.dell.com/support and see the Download section for Video Drivers for latest driver updates. NOTE: When in the Portrait View Mode, you may experience performance degradation in graphic-intensive applications (3D Gaming and etc.).

Dual-Monitor Setup
The ability to rotate 90 clockwise, 90 counterclockwise and reverse (180) mount enable the thinnest borders of each monitor to be placed side by side to ensure minimum gap between display images. The recommended dual-monitor setup: Landscape (side by side)

52

Operating the Monitor

Landscape (Top-bottom)

Supported by wall mounting solution (optional)

Portrait

Operating the Monitor

53

Adjusting the Rotation Display Settings of Your System

After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your system. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the 'contents' on your display. To adjust the Rotation Display Settings: 1. 2. 3. 4. 5. Right-click on the desktop and click Properties. Select the Settings tab and click Advanced. If you have an ATI graphics card, select the Rotation tab and set the preferred rotation. If you have an nVidia graphics card, click the nVid ia tab, in the left-hand column select NVRotate, and then select the preferred rotation. If you have an Intel graphics card, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation. NOTE: If you do not see the rotation option or it is not working correctly, go to www.dell.com/support and download the latest driver for your graphics card.

54

Operating the Monitor

4
Self-Test

Troubleshooting

WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. 2. Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove all Digital (white connector) and the Analog (blue connector) cables from the back of computer. Turn on the monitor.

3.

The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.

or

Troubleshooting

55

or

or

4. 5.

This box also appears during normal system operation, if the video cable becomes disconnected or damaged. Turn Off your monitor and reconnect the video cable; then turn On both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.

Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.

56

Troubleshooting

To run the built-in diagnostics: 1. 2. 3. 4. 5. 6. 7. Ensure that the screen is clean (no dust particles on the surface of the screen). Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode. Press and hold Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen appears. Carefully inspect the screen for abnormalities. Press Button 4 on the front panel again. The color of the screen changes to red. Inspect the display for any abnormalities. Repeat steps 5 and 6 to inspect the display in green, blue, black, white and text screens.

The test is complete when the text screen appears. To exit, press Button 4 again. If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.

Common Problems
The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms What You Experience Possible Solutions
Ensure that the video cable connecting the monitor and the computer is properly connected and secure. Verify that the power outlet is functioning properly using any other electrical equipment. Ensure that the power button is depressed fully. Ensure that the correct input source is selected via the Input Source menu. Increase brightness & contrast controls via OSD. Perform monitor self-test feature check. Check for bent or broken pins in the video cable connector. Run the built-in diagnostics. Ensure that the correct input source is selected via the Input Source menu.

No Video/Power No picture LED off

No Video/Power No picture or no LED on brightness

Poor Focus

Picture is fuzzy, blurry, or ghosting Wavy picture or fine movement

Eliminate video extension cables. Reset the monitor to Factory Settings. Change the video resolution to the correct aspect ratio. Reset the monitor to Factory Settings. Check environmental factors. Relocate the monitor and test in another room.

Shaky/Jittery Video

Troubleshooting

57

Missing Pixels

LCD screen has spots

Cycle power On-Off. Pixel that is permanently Off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:http://www.dell.com/ support/monitors. Cycle power On-Off. Pixel that is permanently off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:http://www.dell.com/ support/monitors. Reset the monitor to Factory Settings. Adjust brightness & contrast controls via OSD. Reset the monitor to Factory Settings. Adjust horizontal & vertical controls via OSD. Reset the monitor to Factory Settings. Perform monitor self-test feature check and determine if these lines are also in self-test mode. Check for bent or broken pins in the video cable connector. Run the built-in diagnostics. Reset the monitor to Factory Settings. Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode. Check for bent or broken pins in the video cable connector. Restart the computer in the safe mode. Do not perform any troubleshooting steps. Contact Dell immediately. Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. Reset the monitor to Factory Settings. Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode. Perform monitor self-test feature check. Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. Check for bent or broken pins in the video cable connector. Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application. Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the Color Management is turned off. Change the Input Color Format to PC RGB or YPbPr in the Color Settings OSD. Run the built-in diagnostics.

Stuck-on Pixels

LCD screen has bright spots

Brightness Problems Geometric Distortion Horizontal/ Vertical Lines

Picture too dim or too bright Screen not centered correctly Screen has one or more lines

Synchronization Screen is Problems scrambled or appears torn

Safety Related Issues Intermittent Problems

Visible signs of smoke or sparks Monitor malfunctions on & off

Missing Color

Picture missing color

Wrong Color

Picture color not good

58

Troubleshooting

Image retention from a static image left on the monitor for a long period of time

Faint shadow from the static image displayed appears on the screen

Use the Power Management feature to turn off the monitor at all times when not in use (for more information, see Power Management Modes). Alternatively, use a dynamically changing screensaver.

Product Specific Problems

Specific Symptoms What You Experience Possible Solutions
Check the Aspect Ratio setting in the Display Settings OSD. Reset the monitor to Factory Settings.

Screen image is Image is too small centered on screen, but does not fill entire viewing area Cannot adjust the monitor with the buttons on the side panel OSD does not appear on the screen

Turn Off the monitor, unplug the power cord, plug it back, and then turn On the monitor. Check whether the OSD menu is locked. If yes, press and hold the button above the Power button for 10 seconds to unlock (for more information, see Lock). Check the signal source. Ensure the computer is not in the power saving mode by moving the mouse or pressing any key on the keyboard. Check whether the signal cable is plugged in properly. Replug the signal cable if necessary. Reset the computer or video player. Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen. Run the built-in diagnostics.

No Input Signal No picture, the LED light is white when user controls are pressed

The picture The picture does not fill the cannot fill the height or width entire screen of the screen

Troubleshooting

59

Universal Serial Bus (USB) Specific Problems

Specific Symptoms What You Experience

Possible Solutions
Check that your monitor is turned On. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector). Switch Off and then turn On the monitor again. Reboot the computer. Some USB devices like external portable HDD require higher electric current; connect the device directly to the computer system.

USB interface is USB peripherals not working are not working

High Speed USB 3.0 interface is slow

High Speed USB 3.0 peripherals working slowly or not working at all

Check that your computer is USB 3.0-capable. Some computers have USB 3.0, USB 2.0, and USB 1.1 ports. Ensure that the correct USB port is used. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector). Reboot the computer.

Mobile High-Definition Link (MHL) Specific Problems

Specific Symptoms
MHL interface is not working

What You Experience

Can not see MHL device image shown on monitor

Possible Solutions
Ensure your MHL cable and MHL device are MHL certified. Check your MHL device is turned On. Check your MHL device is not in Standby mode. Check physical MHL cable connection is corresponding to input source selected on OSD Menu i.e., HDMI (MHL) 1 or HDMI (MHL) 2. Wait for 30 seconds after connecting MHL cable as some MHL devices require longer recovery time.

60

Troubleshooting

Appendix

WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide.

FCC Notices (U.S. Only) and Other Regulatory Information

For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance.

Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To get online Monitor support content: 1. 1. 2. 3. 4. 5. Visit www.dell.com/support/monitors. Visit www.dell.com/support. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page. Click Contact Us on the left side of the page. Select the appropriate service or support link based on your need. Choose the method of contacting Dell that is convenient for you. To contact Dell for sales, technical support, or customer service issues:

Appendix

61

Setting Up Your Monitor

Setting the display resolution
For maximum display performance with Microsoft Windows operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps: In Windows 7, Windows 8, and Windows 8.1: 1. 2. 3. 4. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. Right-click on the desktop and click Screen Resolution. Click the Dropdown list of the Screen Resolution and select 1920 x 1080. Click OK.

If you do not see the recommended resolution as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system you are using, and follow the given steps.

If you have a Dell desktop or a Dell portable computer with internet access
1. 2. Go to www.dell.com/support, enter your service tag, and download the latest driver for your graphics card. After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again. NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell to inquire about a graphics adapter that supports these resolutions.

If you have a non Dell desktop, portable computer, or graphics card

In Windows 7, Windows 8, and Windows 8.1: 1. 2. 3. 4. 5. 6. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. Right-click on the desktop and click Personalization. Click Change Display Settings. Click Advanced Settings. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com).

62

Appendix

7.

After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again. NOTE: If you are unable to set the recommended resolution, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution.

Appendix

63