PVtips PDF
PVtips PDF
PVtips PDF
PowerView 2003.19.2
August 2007
2007 Landmark Graphics Corporation All Rights Reserved Worldwide This publication has been provided pursuant to an agreement containing restrictions on its use. The publication is also protected by Federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, magnetic, manual, or otherwise, or disclosed to third parties without the express written permission of: Landmark Graphics Corporation 2101 CityWest Blvd., Building 2, Houston, Texas 77042-3021, USA P.O. Box 42806, Houston, Texas 77242, USA Phone: 713-839-2000 FAX: 713-839-2401 Web: www.lgc.com
Trademark Notice
3D Drill View, 3D Drill View KM, 3DFS, 3D Surveillance, 3DView, Active Field Surveillance, Active Reservoir Surveillance, ADC, Advanced Data Transfer, ARIES, ARIES DecisionSuite, AssetConnect, Asset Decision Solution, Asset Development Center, Asset Journal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, AssetObserver, AssetObserver Advisor, Asset Performance, AssetPlanner, AssetSolver, AssetSolver Online, AssetView, BLITZPAK, CasingSeat, COMPASS, Corporate Data Archiver, Corporate Data Store, Data Analyzer, DataManager, DataStar, DBPlot, DecisionSpace, DecisionsSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver, DecisionSpace AssetView 2D, DecisionSpace AssetView 3D, DecisionSpace Atomic Meshing, DecisionSpace Decision Management Systems(DMS), DecisionSpace for Production, DecisionSpace Nexus, DecisionSpace PowerGrid, DecisionSpace PowerModel, DecisionSpace PrecisionTarget, DecisionSpace Reservoir, DecisionSpace TracPlanner, DecisionSpace Well Seismic Fusion, DecisionSpace WellSolver, DecisionSuite, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery Asset, Discovery PowerStation, DMS, Drillability Suite, Drilling Desktop, DrillModel, Drill-to-the-Earth Model, DSS, Dynamic Reservoir Management, Dynamic Surveillance System, EarthCube, EDM, EDT, eLandmark, Engineers Data Model, Engineer's Desktop, Engineers Link, ESP, Event Similarity Prediction, Executive Assistant, ezFault, ezSurface, ezTracker, FastTrack, FG+, FieldPlan, Field Scenario Planner, FZAP!, GeoAtlas, GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, GeoLink, GeoProbe, GeoProbe GF DataServer, GES, GESXplorer, GMAplus, GMI Imager, GRIDGENR, Handheld Field Operator, HHFO, I2 Enterprise, iDIMS, IsoMap, iWellFile, Landmark, Landmark Decision Center, Landmark & Design, Landmark Logo and Design, Landscape, Lattix, LeaseMap, LMK Resources, LogEdit, LogM, LogPrep, Magic Earth, MagicDesk, Make Great Decisions, MathPack, MIMIC, MIMIC+, Model Builder, MyLandmark, Nexus, Object MP, OpenBooks, Open Explorer, OpenJournal, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWorks, OpenWorks Development Kit, OpenWorks Well File, OpenWorks Production, PAL, Parallel-VIP, PetroBank, PetroBank Master Data Store, PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack, PostStack ESP, PostStack Family, PowerCalculator, PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, Power Interpretation, PowerJournal, PowerModel, PowerView, PrecisionTarget, Presgraf, PRIZM, Production Asset Manager, PROFILE, Project Administrator, ProMAGIC, ProMAGIC Connect, ProMAGIC Server, ProMAX, ProMAX 2D, ProMAX 3D, ProMAX 3DPSDM, ProMax 4D, ProMax Family, ProMAX MVA, ProMAX VSP, pSTAx, Query Builder, Quick, Quick+, QUICKDIF, QuickWell, QuickWell+, QUIKDIG, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP, RAYMAP+, Real Freedom, Real Time Asset Management Center, Real Time Decision Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, RealTime View, Reference Data Manager, RESev, ResMap, RightTime, RTOC, SCAN, SeisCube, SeisMap, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks 2D, SeisWorks 3D, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerView, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert, SimDataStudio,SimResults, SimResults+, SimResults+3D, SIVA, SIVA+, smartSECTION, Spatializer, SpecDecomp, StrataAmp, StrataMap, StrataModel, StrataSim, StratWorks, StrataWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SynTool, SystemStart, SystemStart for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, The Engineers Desktop, Total Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, Trend Form Gridding, Turbo Synthetics, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIP-THERM, WavX, Web Editor, Wellbase, Wellbore Planner, Wellbore Planner Connect, WELLCAT, WELLPLAN, Well Seismic Fusion, WellSolver, WellXchange, WOW, Xsection, You're in Control. Experience the difference, ZAP!, and Z-MAP Plus are trademarks, registered trademarks or service marks of Landmark Graphics Corporation. All other trademarks, service marks and product or service names are the trademarks or names of their respective owners.
Note
The information contained in this document is subject to change without notice and should not be construed as a commitment by Landmark Graphics Corporation. Landmark Graphics Corporation assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not allow disclaimer of expressed or implied warranties in certain transactions; therefore, this statement may not apply to you.this statement may not apply to you.
Landmark
Contents
. . . . . . . . . . . . . . . . . . 27 27 27 28 29 30
General Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Running ezTracker Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with Multiple Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . In the Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Horizon Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
R2003.19.2
Contents
Landmark
R2003.19.2
Contents
Landmark
R2003.19.2
Landmark
finds the first seismic file to match the highest priority, the software displays that data item. To change the priority order of seismic files, open the Seismic Priority tab of the Contents dialog box (View > Seismic Priority Lists), highlight the file you want to have the highest priority, and press Move to Top. To see the seismic priority list of a 2D line, move your cursor over it. A tooltip appears with the information. If you are choosing data for one tab view, then move to another, the software will automatically switch you to the Select Session Data dialog box for the new tab view. This will be reflected in the titlebar of the Select Session Data dialog box. For instance, if you are selecting data for Map 1, then move to Section 2, the titlebar will change from Select Session Data (Map 1) to Select Session Data (Section 2). To keep the dialog titlebar from updating, deselect Implicit Dialog Refocus in the View menu. In Release 2003.19.1, a new tab view, Well Correlation, became part of PowerView. By displaying wells and well data vertically and a fixed distance apart, the Well Correlation view lets you perform pick interpretation in an uncluttered but more detailed format. To open a new Map or Section while you are working in the bottom list of the Select Session Data dialog box, highlight the name of a horizon or seismic file. Then click on the New Tab icon above the list. The new tab will bear the name of the horizon or seismic file you highlighted, and the tab view will display the item. This procedures works with horizons and seismic files only. To drag and drop a tab directly onto the desktop, use the icon labeled Use Btn 1: Undock This Tab. It is located in the top righthand corner of the PowerView window. If you add seismic to an empty Section tab, it will not appear until you have chosen a Section. You can do this by using one of the icons in the Section Selector toolbar making a choice in the Section From List dialog box, available by selecting Select > Section from List... in the main menu or by clicking on the Section from List icon in the Section Selector toolbar.
R2003.19.2 Appendix A: PowerView Tips 6
Landmark
If seismic still does not appear in a Section: Make sure the Visible check for the seismic file is toggled on. Compare the domain listed in the main menus Select Domain text field with your seismics Domain column, shown in the bottom list of the Select Session Data dialog box. They may conflict. If so, use the Select Domain pulldown menu in the toolbar to change the domain of the Section and make it match the volume. Or, turn off the Domain Match toggle in the bottom list of the Select Session Data dialog box. Check that the Section you selected is within the red outline on the Map. In the Seismic tab of the Select Session Data dialog box, check the seismic extents of the file. If the Section lies outside the volume extents, no seismic will appear in the Section. When working with seismic files in the Display Order tab of the Contents dialog box, the software displays only one volume for a specific attribute per 3D project. For example, to overlay two volumes, both of which are Amplitude (Amp), you must define one as a different attribute (Other_1) and manipulate the seismic display template for those attributes individually. If Vip projects do not appear in the data tree of the Select Session Data dialog box, do as follows: Check to see that you have clicked on the Browse tab in the Select Session Data dialog box. Vip projects are listed in that data tree, not in the data tree of the Active tab. If no projects appear in the Browse tab, make sure you have set the environmental variable VIP_DATA_HOME and specified the directory where Vip data is to be located. Even if you have set the environmental variable, Vip projects will not appear unless the variable points to the correct directory for Vip data. Three domains are available: Time (TWT), depth (TVDSS and TVD), and Frequency. TWT, TVDSS and FREQ are choices in the main toolbar. You can select TVD in the Select Display Datum dialog box (File > Display Datum). FREQ works with SpecD
Appendix A: PowerView Tips 7
R2003.19.2
Landmark
data. A certain layer is processed at different frequencies, and you use the FREQ domain to show the data at different frequencies. PowerView has two dialog boxes in which you can share data items among active and target views. These dialog boxes are Contents; and Modes, Scale and Position. In the right side of these dialog boxes, a checkbox, selected by default, says, Only apply settings from this tab. If you want to share more than one kind of data with a view, be sure that this option is toggled off. Sharing dialog boxes have a Source view and one or more Target views. If you want a Target view to include data items in the Source view, push the Share Source button in the Contents or Modes, Scale and Position dialog boxes. If you want the Source view to share what is in a Target view, push Share Target. To designate a new Source view, place your cursor in the appropriate row and press Mouse Button 2. The row becomes gray, and the word Source appears in the Type column. To make a discontinuous multipanel display while you are in Point to Point mode, use the Button 3 popup menu available in a Map. Click MB1 to start a line, MB1 to end it, and MB3 to open the popup menu. Select Break. Repeat as many times as desired. Then, to display the multipanel, click MB2 or press MB3 and select Begin Display. Be sure to press <Return> when you enter data into the text fields of the Select Session Data dialog box and other lists. You must also press <Return> after you type in new weights when performing Math Blending in the Image Composer. The new value will not be accepted until you do. To change the histogram scaling value for the color bar, you can use the pulldown menu in the Hist. Scale column in a list of selected data items. Or, you can type in a number. To quickly change the opacity of a display, use the Opacity adjustor within the Parameters box at the bottom of a histogram. Click on the arrow next to the word Parameters to expand the box. To quickly reset the area-of-interest display for a survey, rightclick on the survey name in a list of selected session items and
R2003.19.2
Landmark
choose Reset IL AOI, Reset XL AOI, or Reset Both. Then click Apply or OK. Only Math Blended composed images can be saved as horizons or used as input grids to create other composed images. Do not use a GeoProbe shared volume in the Volume Composer. Do not use a Mouse Button 3 menu while you are running the Slide Show (Window > Slide Show...). You can use session files from Release 2003.19.1 in Release 2003.19.2. Landmark recommends that you resave older session files after they have been successfully restored. Doing so will help ensure continued compatibility. After loading data and constructing your layout of tabs and windows, save a session file before you begin interpretation.
Color Display
Most PowerView color bars are displayed with the maximum value at the top and the minimum value at the bottom. This design is the same as that for the SeisWorks Seismic View color bar. Only Time horizons in the Map will be displayed with the minimum value at the top and the maximum at the bottom, as in the SeisWorks Map View. The default color bars are different for horizons and seismic volumes. For horizons, the default is 0_Spectrum. For seismic, it is Greyscale. When you want to select a new color bar from File > Open in the Color Editor, you can choose from one of three lists: System, with a static list of palettes; GeoProbe, which contains the static palettes available in GeoProbe; and User, which consists of color bars that you have created. However, if you click on the Open a color palette icon in the Color Editor, you will see all color bars, including the ones you created. A shortcut to choosing a color bar is to right-click in the Color Bar task pane. Then click on Select Colors and choose from either System. GeoProbe, or User, as described directly above.
R2003.19.2
Landmark
R2003.19.2
Landmark
appropriate fields of the View Groups interface of the Modes, Scale and Position dialog box. Preserve Aspect Ratio in the View menu is off by default for Sections and Well Correlation views. Once you are satisfied with your aspect ratio, toggle this option on. To make a cross-hair appear when you turn on the Point Marker, click on the box that says Display a cross-hair at the marker location. You find this option in View > Contents > View Properties tab > Marker tab. Then click Apply or OK.
The TransformView
This tool lets you calculate attributes on the fly. As you work with it, you may want to resize the TransformView. Landmark recommends that you freeze it first. To do so, click on <F4>, and check the Resize button in the TransformView pane in the Task Pane. Then move your cursor up, down, and sideways within the Transform View to manipulate its size. The resizing operation ends when you take your finger off the mouse. Open the TransformView in a window with a single Section. You can zoom the display within the TransformView window. To do so, use the up or down arrows in the TV Window Zoom text field in the Task Pane.
Interpretation
Beginning with 2003.19.1, you can interpret both 3D and 2D data. When you select an interpretation mode, the software displays a Task Pane with functionality for that interpretation mode. You can also access the panes by clicking on Interpretation in the Task Bar on the right-hand side of the window.
Horizons Multi-Volume Track in horizon interpretation lets you pick multiple horizons on multiple seismic volumes simultaneously or multiple horizons on a single seismic volume simultaneously.
Appendix A: PowerView Tips 11
R2003.19.2
Landmark
Use the Wizard in the Horizon Interpretation pane of the Task Pane to complete a job. Then press Open Window to see the results. When you work with Multi-Volume Track, start from a new session instead of a saved session. You can use the special autotracker ezTracker Plus for horizons in PowerView. The prefix or suffix ezT is attached to horizons autocreated in ezTracker Plus. If you want to clean up horizons in a Map, use Polygon Track. If you want to extend your interpretation in a Section, use Area Track. A red band in the Map designates the zone of your tracking. See the Horizon Interpretation chapter in the PowerView Guide for more information.
Faults Use the Convert to Segment option to interpret a triangulated fault quickly. With Mouse Button 3, click on or near the triangulated fault and select the conversion option from the resulting popup menu. A fault segment can have no more than 64 points. You use the ezValidator to align horizons across faults. You can unfault all horizons at once, and animate the unfaulting. If you enter an interpretation mode while you are using ezValidator, the ezValidator will automatically revert to View and cease its operation. To resume use of the ezValidator, toggle on one of the unfaulting options under View. Load a set of faults and faulted horizons before you enter ezValidator. In Release 2003.19.1, PowerView introduced a fault autotracker, which is called smartFault in Maps. This autotracker picks fault traces on horizontal time or depth slices. It works best with a special fault attribute volume generated from coherency data, but it can also pick faults directly from the coherency data.
R2003.19.2
12
Landmark
For more information on smartFault, see the Fault Interpretation chapter in the PowerView Guide.
Well Picks You can interpret surface picks or faults picks in PowerView. Beginning with Release 2003.12.2, you create surface names under the Surfaces tab in the Create Interpretation Object dialog box. You can open this box from the Mouse Button 3 popup menu during well pick interpretation. Select Create Surfaces to do so. Or click on the Create Surfaces icon at the top of the Well Pick Interpretation Task Pane. You can use the Mouse Button 3 popup menu to remove wells from a display during well pick interpretation. Move your cursor near wells you want to remove, and click Mouse Button 3. The menu now includes the option Remove Well with the name of the well after it. Click on the well to remove it. To make it appear again, press Mouse Button 3 again and select Turn All Wells On. When you are in well pick interpretation, you can link all picks of the same name on a continuing surface. This process is called Auto-Regridding. For more information, see the Well Pick Interpretation chapter in the PowerView Guide.
Polygons/Centerlines Beginning with Release 2003.19.1, PowerView provides direct creation and interpretation of centerlines in a Map. Among the features of centerline interpretation is centerline clipping. Use this functionality when you are drawing a new centerline and cross another centerline. Then the centerline you are drawing will automatically be terminated where it meets the existing centerline. Beginning with Release 2003.12.2, you can work with both open and closed polygons. To quickly smooth polygons, use one of these methods: Click on a polygon, and select Smooth Polygons from the Button 3 popup menu In the Polygon Info section of the Task Pane, select one or more polygons from the list and click on the icon labeled Smooth selected polygons.
R2003.19.2 Appendix A: PowerView Tips 13
Landmark
You can automatically generate polygons for a horizon that has been fully interpreted, interpolated, or processed using ezTracker Plus. To do so, use the Auto Poly panel in the Polygon Interpretation task pane. PowerView lets you extend the range of polygons by graphically joining them. For instructions, see the Joining Polygons section of the Polygon Interpretation chapter in the PowerView Guide.
R2003.19.2
14
Landmark
PowerView contains the following gridding and contouring algorithms: Refinement Gridding and B-Spline Gridding These two surface modeling algorithms are significantly faster than anything available in Z-MAP Plus. Since gridding speed may be increased by a factor of 10 or more, PowerView can construct models from larger data sets than ever before possible. Contouring The contouring routine is faster than traditional algorithms and less prone to leaving color holes in maps. Contouring uses new display parameters, including fault annotations that conform to industry standards. Its combination of speed, multiple viewing windows, and the ability to simultaneously display surfaces from different sources has the potential to greatly enhance integrated data exploration.
All but a few settings in gridding and contouring have default values, so you can quickly generate grids and contour maps, then refine them with customized settings if you like.
2003.19.2
15
Landmark
Refinement Gridding
The Refinement Gridding algorithm takes full advantage of the large memory on modern computers and incorporates several innovative ideas to speed up processing. Refinement Gridding is the default gridding algorithm for Grid and Contour and is the gridding algorithm you use if you want to include faults in the grid. This algorithm also works well on unfaulted data and is particularly effective at producing a grid that optimizes the appearance of both regional trends and local detail. Refinement Gridding conducts a series of refinements until the target grid cell size is reached, passing the surface model through a biharmonic filter to produce a minimum curvature surface (page 17). The following example shows a grid generated with Refinement Gridding from data that includes complex faulting.
In the example, the surface model used for tracing the contours has 275 rows and 450 columns. The input data has 42,000 seismic shot points and 6,000 fault segments. The model took only a few seconds to generate using Linux.
2003.19.2
16
Landmark
Initial Grid
At each refinement level, the surface model passes through a biharmonic filter, producing a minimum curvature surface. Each iteration ties the surface back to the actual data points, ensuring that the surface model closely honors the input data points. Refinement Griddings iterative refine and filter approach results in a surface model that varies smoothly from point to point. extrapolates above or below actual data values. continues trends beyond the data into void areas.
Working at coarse spacing imposes the low spatial frequencies of the data on the surface, and working at finer spacing imposes the higher spatial frequencies of the data on the surface. Another way of saying this is that working at coarse spacing imposes the regional trends of the data on the surface while progressing to finer spacing generates a surface that closely honors the data.
2003.19.2
17
Landmark
The heavy line with markers at each end connects a data value to a grid node. Only one of the two fault traces must be checked to see whether it crosses this line because the line crosses only one of the bounding boxes around the fault traces.
2003.19.2
18
Landmark
2003.19.2
19
Landmark
B-Spline Gridding
The B-Spline Gridding algorithm is a very fast algorithm for generating unfaulted surface models from scattered data.
2003.19.2
20
Landmark
A bicubic B-Spline function is fit to each data point, based on input from the control point itself and the 16 surrounding nodes. To make the function fit the control point exactly, the 16 node values are adjusted up or down from their initial value. A cross-section view of this adjustment is shown in the following illustration.
A bicubic B-Spline curve is fit through each data point, forcing the values for the 16 surrounding nodes to be adjusted up or down.
When the process is finished, each grid node has a new value based on every data point. For example, if the dataset contains 10 data points, a new value for each node is computed 10 times. The 10 values are averaged to produce the final node value for the current refinement pass. The grid is refined by using cubic B-Spline interpolation, and the process is repeated. As shown in the following illustrations, after one refinement the area occupied by the data points is divided into four cells. After a second refinement the area occupied by the data points is divided into 16 cells. (The grid contains 16 cells that could potentially contain one or more data points.)
After each refinement, the bicubic B-Spline curve is fit through each data point again, using an equation based on the value of each point and its new set of 16 surrounding nodes. The curve fits the data point, and the node values are adjusted. The process continues until the grid reaches the target cell size.
2003.19.2
21
Landmark
Contouring
The Contouring algorithm uses the Cell Priority contouring approach. This approach is not new, but until recently, the limitations of computer memory made it impractical. In Cell Priority contouring, the following events occur: 1. 2. 3. 4. A smooth surface model is developed from a grid cell, based on interpolated grid nodes surrounding the grid cell. A refined grid is superimposed on the cell. Z-values for the new nodes are interpolated. Contour segments for the cell are generated from the model.
Each grid cell is processed in sequence, then the segments are retrieved from storage and assembled into complete contours. Ultimately, the smoothness of the contours is controlled by how densely the grid cells are refined. The Refinement parameter controls the number of points needed to represent a contour. The coarser the refinement, the more angular the contours, as fewer points are used to represent the lines. The finer the refinement, the smoother the contours, as more points are used to represent the lines. You can use any of five refinement options, ranging from Very Coarse to Very Fine. At the Very Coarse setting, no refinement is performed.
96.1 Using linear interpolation, the algorithm finds the point at which a contour segment crosses a cell boundary between the two Z values at the nodes marking the ends of the cell edge. The program locates the entrance and exit points the points at which the contour segment enters and exits the cell. The contour segment is treated as a straight line between these two points. 128.4
0 10
104.3
71.9
2003.19.2
22
Landmark
The coarsest refinement is very fast, but results in linear contours with a faceted look. Contours are not smooth, and any auxiliary data that exists is ignored. A step up from the Coarsest (linear) method uses a refined grid cell. To refine each grid cell, the application uses additional nodes (for a total of 16 grid nodes) around the grid cell. The data from the additional nodes is used to create a smooth model.
Sixteen Nodes Used to Create a Surface Model for a Grid Cell Linear interpolation is then applied to each cell in the refined grid.
At Fine refinement, the cell is At Medium refinement, the At Coarse refinement, the cell is refined by a factor of 2. cell is refined by a factor of 4. refined by a factor of 8. (For Very Fine, the refinement factor is 16.)
2003.19.2
23
Landmark
The following examples show contours becoming smoother at a higher refinement level. As refinement changes from Coarse to Very Fine, contours appear less angular and increasingly smooth.
Coarse
Medium
Very Fine
2003.19.2
24
Landmark
96.1
At Coarse refinement, the single grid cell is interpolated into a 2 x 2 cell. At Medium refinement, the grid cell is interpolated into a 4 x 4 cell.
71.9
104.3
At Fine, 8 x 8 cell.
Effect of Refinement Levels on Number of Grid Cells Once all the individual cells are processed and complete closed contours are assembled, the program uses line generalization to eliminate unnecessary points.
2003.19.2
25
Landmark
2003.19.2
26
Landmark
When you work with large projects, you may wish to consider some of the following scenarios to improve overall workflow performance or stability.
General Considerations
The Used Memory gauge The Used Memory gauge is located in the status bar in the extreme bottom right corner of each PowerView window. As you use memory, the red shown in the example here increases. When you see mostly red in the gauge, you are running out of memory.
On 32 bit architecture, the default jvm size is 1200m. In some circumstances, this size may not be large enough. If the Used Memory gauge remains in a high position, or the applications fail with Insufficient Memory messages in the run directory .log file, increase the memory by setting the following variable: setenv POWERVIEW_MEMORY 1700m If the environmental variable is set too high on a 32 bit machine, PowerView does not start because the java virtual machine (jvm) cannot be initiated. The maximum may vary by machine, but it is normally between 2000m and 1200m.
If possible, use 64 bit architecture Linux machines for larger projects. PowerView is 64 bit enabled here and can manage more information in memory. The default jvm size for 64 bit is about 5GB. You may also have to adjust the memory size for ezTracker Plus. Current defaults are 1200m for 32 bit systems and 2500m for 64 bit systems. To increase these sizes, use the following environmental variable: setenv PVEZT_JAVAXMX 2600
R2003.19.2
Landmark
first time, use Ctrl + Mouse Button 1 on the Run ezTracker Plus button. When the ezTracker Plus Run Options dialog box appears, adjust the parameters. When you are tracking a strong event without faultslike the water bottomyou can reduce both initial and final tile sizes to three. This strategy will force one iteration and minimize the loop tie requirements. You may also see a slight improvement in performance if you use the Cross Correlation or Peak to Peak tracking methods in the Advanced tab of ezTracker Plus. Tests have shown improved tracking results from Cross Correlation when compared to Peak to Peak. For more information about ezTracker Plus, see the Horizon Interpretation chapter in the PowerView Guide.
R2003.19.2
28
Landmark
In the Section
Working Within a Reduced Area By default, PowerView displays the entire line, including the entire time/depth range for a Section. If possible, reduce the area for the large 3D surveys that you work with at any one time. To do so: Use the Select Z Range By Domain dialog box to manually set the desired Section z range (Select > Z Ranges...). In the 2D/3D Projects tab at the bottom of the Select Session Data dialog box, click Mouse Button 3 within one of the AOI inline or xline columns for a 3D project. When a pulldown menu appears, choose Select IL/XL AOI From Map. In the Map, hold down Mouse Button 1 and drag it until you have selected the desired working area. When you release the button, the ranges change in the appropriate AOI line columns. The software then restricts seismic Sections and Map horizons to the range. Caching One Full Inline or XLine It is important that a full Section (inline or crossline) be held in cache. The default seismic cache sizes are 40:40:25 for brick files (.bri); uncompressed cache (.cmp); and compressed (.cmp). Compute the required sizes, then set the following environmental variable: setenv LGC_PV_SEISCACHE_MAX 50:50:40 In general, you should stay below 100:100:75. If this size is not large enough, you may want to consider turning off the seismic read-ahead in the SeismicCache tab in the View Properties tab of the Contents dialog box. Otherwise, the read-ahead may compete with the Section reads. Special Note: More cache does not always mean faster performance. It is important to find the right number based on experience with the project and the network environment. Populating the Local Disk Cache If you have a large amount of free local disk, cache the primary volume by using the Cache Manager under View > View Properties > SeismicCache tab. Here you can
Appendix C: Working with Large Projects 29
R2003.19.2
Landmark
cache all lines, crosslines, or a specific increment to disk. If you use an increment, set the line selection to the same frequency. Then normal selections will always find a line in your cache. In general, disk-cached lines and crosslines display in about one second, regardless of the size. If you find this strategy useful and want it activated by default for new sessions, set the PV_USE_LDISC to ro (read only) or updated (read-write). For best performance, you may want to pre-populate the cache and use the read-only option. For more details, see Seismic Caching in the Setting Properties chapter of the PowerView Guide.
Well Curves, Especially with Colored Fill If you do not need curves turned on in the Section all the time, use the Inventory Task Pane to temporarily turn them off. Click on the main Log Curves branch to do so.
Horizon Data
Local Temporary Cache Horizon data displayed in the system may be cached to a local disk. This disk should have enough space to hold horizons of the size and number that you will be working with at one time. If the available space is insufficient, the system will revert to rereading horizons from the remote project drive. This process can be slow. By default, this disk location will be the system tmp directory. You can control this location with the following environmental variable: setenv LGC_HZN_TMPDIR <local drive/directory with lots of space> You can also set the limit of disk space that will be used. The system will validate your disk with sufficient space for the request and will not allow the request to exceed 90 percent of the free space. This size is in MB. The environmental variable is setenv PV_HZN_MAXTMP 5000
R2003.19.2 Appendix C: Working with Large Projects 30
Landmark
Note: If, when running PowerView, it fails with a native code exception, this local disk cache directory may not be properly cleaned by the exit handler. It is a good idea to check the location occasionally to ensure no older files remain. Delete any that you find.
R2003.19.2
31
Landmark
R2003.19.2
32
Landmark
Index
contour maps Contouring algorithm described 20 Convert to Segment option fault interpretation and 10 cross-hair, Point Marker displaying of 9 D dialog boxes sharing concept 6 Display Order tab seismic files and 5 domains 6 drag and drop 4 E ezTracker Plus 10 ezValidator 11 data loading and 10 fault interpretation and 10 F fault interpretation Convert to Segment option 10 ezValidator 10
Index
33
Landmark
limit on creation of points 10 smartFault 10 faults processing: Refinement Gridding 16-17 G GeoProbe 7 gridding B-Spline Gridding algorithm 18-19 Refinement Gridding algorithm 14-17 H histogram scale changing values of 6 horizons interpretation of Area Track and 10 Multi-Volume Tracking 9 I icons for locking 9 Image Composer saving image as horizon 7 Implicit Dialog Refocus option 4 interpretation 3D and 2D 9 Task Pane and 9 Inventory Task Pane 3 ZGF components listed in 3
J joining polygons 12 L large projects 25-29 locking 9 M mistie values displaying 12 multipanel displays discontinuous 6 Multi-Volume Tracking horizon interpretation and 9 N New Tab icon 4 O Opacity adjustor 6 P Point Marker displaying cross-hair for 9 polygon interpretation Auto Poly option 12 extending range of polygons 12 open and closed polygons 11 smoothing 11
R2003.19.2
Index
34
Landmark
Preserve Aspect Ratio option 9 projects, large 25-29 default jvm size 25 ezTracker Plus and 25 horizon data and 28-29 Linux machines and 25 multiple projects and 26 Sections and 27 R Refinement Gridding algorithm 14-17 Refinement setting description of algorithm behavior 20, 23 illustrated examples of effects 22 Relock Modes, Scale and Position 9 renaming tabs 8 Return key entering data and 6 S Sections Preserve Aspect Ratio and 9 seismic automatic selection of Sections 3 troubleshooting display 4 seismic priority Section displays and 4 tooltips and 4 sessions saving 7
R2003.19.2
sharing concept, dialog boxes 6 Slide Show 7 smartFault 10 Source view 6 surfaces creating 11 T tabs cloning of 8 creating instant 8 inheriting properties and 8 opening new views 4 renaming 8 Target view 6 Task Pane Inventory pane 3 tooltips seismic priority and 4 TransformView opening 9 resizing of 9 zooming in window 9 troubleshooting execution time: large dataset (contouring) 18 Vip displays 5 U Unlock Modes, Scale and Position 9
Index 35
Landmark
V Vip data troubleshooting display of projects 5 W Well Correlation view 8 well pick interpretation Auto-Regridding and 11 wells removing of from display 11
R2003.19.2
Index
36