Scribd
Upload
205 views2 pages

Esteem Product Line AB

The document discusses a wireless radio modem called the ESTeem that provides wireless communication capabilities for Allen-Bradley PLCs, allowing them to communicate without additional wiring. It supports the DF1 communication protocol and can route information through multiple modems to extend the wireless network range in an industrial environment. The document provides details on the technical specifications and features of the ESTeem modem.

Uploaded by

alamsyah_syam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
205 views2 pages

Esteem Product Line AB

The document discusses a wireless radio modem called the ESTeem that provides wireless communication capabilities for Allen-Bradley PLCs, allowing them to communicate without additional wiring. It supports the DF1 communication protocol and can route information through multiple modems to extend the wireless network range in an industrial environment. The document provides details on the technical specifications and features of the ESTeem modem.

Uploaded by

alamsyah_syam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Allen-Bradley

Wireless Solutions
The ESTeem radio modem provides a wireless Radio Area Network (RAN) interface to the Allen-Bradley PLC, ControlLogix , SLC and MicroLogix products by allowing asynchronous RS-232C, RS-422, and RS-485 modules to communicate without any additional programming to the PLC. The ESTeem allows Allen-Bradley users communication to inaccessible areas, eliminate in-plant wiring, leased line, and cellular communication costs. The ESTeem modem supports the DF1 communication protocols. This allows the Allen-Bradley user to enable a READ or WRITE message instruction between PLCs. Once the ESTeem is configured for DF1 protocol, the ESTeem will read the destination address in the protocol and send the information to the ESTeem and Allen-Bradley PLC with that address. The ESTeem can route information through multiple ESTeems to extend the range of the network, transparent to the Allen-Bradley PLCs. All ESTeem products use state-of-the-art licensed narrow band or unlicensed spread spectrum packet burst technology to give high data integrity in high noise industrial environments. The ESTeem incorporates a 32 bit CRC and a forward error correction that provides received accuracy of greater than one part in 100 million.

ALLEN-BRADLEY FEATURES
Full DF1 Emulation Full/Half Duplex Communication with BCC or CRC Error Checking Direct Interface to PLC 5, ControlLogix, SLC 500, and MicroLogix Family of Controllers via RS-232 Interfaces Peer To Peer Communications for all Hardware Remotes can Operate as DF1 Master for more Efficient Data Transfer Masterless Networking Point to Multi-Point Network with Half and Full Duplex DF1Communications Allows Report-by-Exception Protocol Allows Remote Initiated Message Instructions All HMI Software With DF1 Drivers is Supported On-Line Programming Supported over Radio Network Digi-Repeating Transparent to A-B Protocol Group Command Allows Connection of Multiple PLCs and SLCs to a Single ESTeem Functions as a Master, Remote, or Repeater by Simple Programming to Reduce System Hardware and Spares

Wireless Communication Made Simple

How does it work?

Personal Computer

Communication Interfaces RS-232C RS-422 RS-485


PLC-5 Products

120 VAC to 12 VDC Power Supply Antenna

Feedline
Antenna Model 192
12 VDC RESET IR T/E Port TX RX PWR Phone S/N: A N E T Q E U N IN P A M E N T

ControlLogix Products

Lightning Arrestor Infrared Communications Port for Remote Programming and Diagnostics Without Interruption of the Wireless Network

SLC-500 Products

ESTeem Utility Software Provided

MicroLogix Products

Technical Specifications
SWITCHES Model 192C, 192F, 192M, 192S CPU Reset RS-232/422/485 Setup Models 192V, 95 Off/On/CPU Reset RS-232/422/485 Setup LED INDICATORS Models 192C, 192F, 192M, 192V, 192S, 95 Power On Receiver Carrier Detect Transmitter Enable Link Connect/Disconnect Auto Connect Enable RS-232/422/485 Framing Error I/O CONNECTORS Models 192C, 192F, 192M, 192V, 95 RS-232C/422/485 - 25 Pin Sub D Female Antenna Output - TNC Input Power - 2 Pin Molex Female Model 192S RS-232C/422/485 - 25 Pin Sub D Female Antenna Output TNC-R Input Power - 2 Pin Molex Female Models 192C, 192F, 192M, 192V, 192S Infrared Programming Port ADDRESSING RANGE Models 192C, 192F, 192M, 192V, 192S 1 to 254 Model 95 0 to 253 DATA INPUT Models 192C, 192F, 192M, & 192V RS-232/422/485 Asynchronous Selectable 600 to 19,200 baud 7 to 8 data bits Even, Odd or no parity One or Two Stop Bits DATA INPUT Model 192S RS-232/422/485 Asynchronous Selectable 1,200 to 57,600 baud 7 to 8 data bits Even, Odd or no parity One or Two Stop Bits Model 95 RS-232/422/485 Asynchronous Selectable 110 to 9,600 baud 7 to 8 data bits Even, Odd or no parity One or Two Stop Bits DATA BUFFERS Models 192C, 192F, 192M, 192V, 192S Transmit 4000 bytes Receive 4000 bytes Model 95 Transmit 2020 bytes Receive 2020 bytes FLOW CONTROL Models 192C, 192F, 192M, 192V, 192S, & 95 Hardware or Software DATA TRANSMISSION PROTOCOL Models 192C, 192F, 192M, 192V, 192S, 95 Carrier Sensed Multiple Access with Collision Detection (CSMA-CD) ERROR CHECKING Models 192C, 192F, 192M, & 192V Forward Error Correction and 32 Bit Cyclic Redundancy check (CRC) with Packet Acknowledge and Retry Models 192S 32 Bit Cyclic Redundancy check (CRC) with Packet Acknowledge and Retry Model 95 16 Bit Cyclic Redundancy check (CRC) with Packet Acknowledge and Retry

FREQUENCY OF OPERATION 192C 450 to 470 MHz 192F 400 to 420 MHz 192M 410 to 174 MHz 192S 2.4 GHz 192V 72 to 73 MHz 95 72 to 73 MHz TRANSMITTER POWER 192C 2 watts (4 watts-opt) 192F 4 watts (2 watts-opt) 192M 2 watts (4 watts-opt) 192S 1 watt 192V 1 watt 95 1 watt RF DATA RATE Models 192C, 192F, 192M, 192V 19,200 bps @ 25 KHz 9,600 bps @ 12.5 KHz Model 192S 171,000 bps Model 95 9,600 bps RECEIVER SENSITIVITY Models 192C, 192F, 192M, 192V, & 95 < 1 uv RECEIVER SQUELCH Models 192C, 192F, 192M, 192V, 192S, & 95 Four Levels Software Programmable MINIMUM RADIO TURN AROUND TIME Models 192C, 192F, 192M, & 192V < 30 ms + Data (W/ACK) < 15 ms + Data (W/O ACK) Model 95 < 180 ms + Data (W/ACK) < 90 ms + Data (W/O ACK) Model 192S < 4 ms + Data (W/ACK) < 2 ms + Data (W/O ACK) POWER REQUIREMENTS Models 192C, & 192F, 192M 11-15 VDC @ 400 mA Rx @ 1.5 A Tx (2W) @ 2.0 A Tx (4W)

POWER REQUIREMENTS Model 192V 11-15 VDC @ 490 mA Rx @ 850 mA Tx Model 192S 11-15 VDC @ 290 MA Rx @ 700 MA Tx Model 95 11-15 VDC @ 200 MA Rx @ 700 MA Tx SIZE Model 192C, 192F, 192M, 192S 2.45 in. Height 8.16 in. Width 9.37 in. Length Models 192V 2.25 in. Height 5.25 in. Width 10.25 in. Length Model 95 2.25 in. Height 5.25 in. Width 7.00 in. Length WEIGHT Model 192C, 192F, 192M, 192S 5 lbs. Models, & 192V 3.2 lbs. Model 95 2.2 lbs. ENVIRONMENT Models 192C, 192F, 192M, 192V, 192S 95 -30 to 50 C 95% Non-condensing WARRANTY 1 Year all products

For more information contact:


Electronic Systems Technology 415 N. Quay St. Kennewick, WA 99336 (509) 735-9092 Fax (509) 783-5475 E-mail: [email protected] Web Site: www.esteem.com

You might also like