The document summarizes specifications for three electric forklifts models from Clark - the GTX16, GTX18, and GTX20s. The summary includes the models' lifting capacities of 1600kg, 1800kg, and 2000kg respectively. Dimensional data and performance metrics like travel speed, lift speed and gradeability are provided in table format. Key features of the forklifts like the operator cell, drive motors, brakes, steering and hydraulic system are also briefly described.
The document summarizes specifications for three electric forklifts models from Clark - the GTX16, GTX18, and GTX20s. The summary includes the models' lifting capacities of 1600kg, 1800kg, and 2000kg respectively. Dimensional data and performance metrics like travel speed, lift speed and gradeability are provided in table format. Key features of the forklifts like the operator cell, drive motors, brakes, steering and hydraulic system are also briefly described.
The document summarizes specifications for three electric forklifts models from Clark - the GTX16, GTX18, and GTX20s. The summary includes the models' lifting capacities of 1600kg, 1800kg, and 2000kg respectively. Dimensional data and performance metrics like travel speed, lift speed and gradeability are provided in table format. Key features of the forklifts like the operator cell, drive motors, brakes, steering and hydraulic system are also briefly described.
The document summarizes specifications for three electric forklifts models from Clark - the GTX16, GTX18, and GTX20s. The summary includes the models' lifting capacities of 1600kg, 1800kg, and 2000kg respectively. Dimensional data and performance metrics like travel speed, lift speed and gradeability are provided in table format. Key features of the forklifts like the operator cell, drive motors, brakes, steering and hydraulic system are also briefly described.
CLARK THE FORKLIFT Europe North Amerika South Korea
w w w . c l a r k m h e u . c o m
GTX16/18/20s
DIMENSIONS
For corresponding data see Specification Chart.
Truck Capacities
Capacity at different load centres
Performance may vary +5% and -10% due to motor and system efficiency tolerance. The performance shown represents nominal values which may be obtained under typical operating conditions of a machine. CLARK products and specifications are subject to change without notice.
2250 2000 1750 1500 1250 1000 750 500 250 0
Capacity in kg
GTX 20s GTX 18 GTX 16
0 500 600 700 800 900 1000 1100
Load center in mm Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3085 mm. The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configuration with the centre of gravity at the true centre of the cube With upright tilted forward lower capacity values are valid. Attachments, longer forks, exceptional load dimensions and higher lifting heights can reduce the capacity. Please talk to your CLARK dealer if you require further information.
Upright table
Capacity at different load centres
Upright table metrics in mm max. overall height CLARK fork height lowered free lift Ref. h3 h1 h2h5* Standard GTX 16, 18, 20s (2 Stage Mast, standard free lift)
Upright table metrics in mm max. overall height CLARK fork height lowered free lift Ref. h3 h1 h2h5* Triple GTX 16, 18, 20s (3 Stage Mast, full free lift)
GENERAL DATA
V V V V V V V V V V * without LBR
2085 2585 2785 3085 3385 3585 3795 4075 4585 5085
1560 1810 1905 2060 2205 2310 2415 2555 3010 3260
132 132 132 132 132 132 132 132 132 132
M M M M M M M M M * without LBR
3970 4345 4780 5185 5565 5740 6015 6470 7075
1835 1960 2105 2255 2415 2480 2605 2795 3050
597 722 867 1017 1177 1242 1367 1557 1812
Upright table metrics in mm max. overall height CLARK fork height lowered free lift Ref. h3 h1 h2h5* Hi-Lo GTX 16, 18, 20s (2 Stage Mast, full free lift)
H H H H H * without LBR
2925 3215 3515 3695 3810
1960 2105 2255 2345 2415
722 867 1017 1107 1177
All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions. Specifications for Non-emission limited truck.
Manufacturer (Abbreviation) Manufacturers designation Drive unit battery Operator type stand on/driver seated Load capacity/rated load Load centre distance Load centre distance, centre of drive axle to fork face Wheelbase Service weight Axle loading, laden front/rear Axle loading, unladen front/rear Tyre type, SE = superelastic, C = cushion Tyre size, front, superelastic Tyre size, rear, superelastic Wheels, number front/rear (x = drive wheels) Tread, front SE (C) Tread, rear Tilt of upright/fork carriage, a / b Height, upright lowered Freelift Lift height Height, upright extended Height overheadguard (Container) Seat height MSG 20 (MSG 12) Coupling height Overall length Length to face of forks Width Fork dimensions Fork carriage DIN 15173, A, B Fork carriage width Ground clearance minimum, laden Ground clearance centre of wheelbase Stacking aisle for pallets (l6 b12) 800 x 1200 across Stacking aisle for pallets (l6 b12) 1000 x 1200 across Stacking aisle for pallets (l6 b12) 800 x 1200 along Turning radius Travel speed laden/unladen Lift speed laden/unladen Lowering speed laden/unladen max. drawbar pull laden/unladen (S2 5 min) max. gradeability laden/unladen (S2 5 min) Service brake Drive motor rating (S2 60 min) Lift motor rating (S3 15 %) Battery acc. To DIN 43531/35/36 A,B,C, no Battery voltage / nominal capacity K5 Battery weight (min.) Type of control Operating pressure for attachments Sound level, drivers ear
Q(kg) c (mm) x (mm) y (mm) kg kg kg
b10 (mm) b11 (mm) deg h1 (mm) h2 (mm) h3 (mm) h4 (mm) h6 (mm) (mm) (mm) l1 (mm) l2 (mm) b1(mm) s*e*l (mm) b3 (mm) m1 (mm) (mm) (mm) (mm) Wa (mm) km/h m/s m/s N % kW kW V/Ah kg kg/cm2 dB (A)
Operator cell - Driver oriented coloured TFT-LCD-display showing real time operating data - Customised adjustment of 80 operating parameters to suit working conditions and drivers preference - Input of parameters via intelligent display instead of expensive handset or notebook - Generous foot space, simple and comfortable handling of pedals - Easily accessible emergency switch - Easy entry and exit as well as customised adjustment to the driver via tilting steer pylon - Ergonomically designed workplace - Noise reduced hydraulic pump Engines - Dual drive motors which provide increased traction especially on wet or uneven surface - Precise and dynamic response to lift- and tilt controls - Optimisation of energy consumption - Return of energy by regenerative braking - All motors are completey enclosed and thus protected agains dust, water and dirt - Equipped with thermistor which constantly monitors temperature; control cuts back current when temperature approaches thermal limit Brakes - Continous brake power by completely enclosed wet disk brakes even in humid, abrasive or corrosive-prone environment - No adjustment or regular replacement of the brake pads necessary Steering - 90 turn steer axle (GTX) - 101 steer angle (GEX) - Tightest possible turn radius as pivot point is centered between drive wheels - Constant transmission of steering wheels position by sensor Hydraulic system - A single gear driven pump provides oil for hydraulic functions and steering - Gentle load handling thanks to sensitively operated and precisely responsive control valve - Optional: Mini-Joystick-hydraulic controls integrated into armrest - Optional: Mini-Lever-hydraulic controls integrated into armrest Upright - CLARK Standard-, Hi-Lo- and Triplex-full free lift uprights - Extremely distortional resistant due to special rolled profiles - Hydraulically shock absorbing lift cylinders ensure silent operation, especially during free lift - Sealed canted rollers minimise deflection and free play in both upright and carriage - Even distribution of loadig weight via six carriage rollers - Robust chassis made of thick steel ensures high torsional chassis strength. Additional features - Fork leveller - Video-Camera (rear, carriage) - Unitrol - Seat cutoff - Automatic seat brake - Incline limiter
PRODUCT DESCRIPTION
Your authorized CLARK dealer is:
En. 09/2008
CLARK Europe GmbH Neckarstrae 37 D - 45478 Mlheim an der Ruhr Tel. +49 208 377336 0 Fax +49 208 377336 36 email: [email protected] www.clarkmheu.com
