Brake

From Wikipedia, the free encyclopedia

This article is about the vehicle component. For other uses, see Brake (disambiguation).

This article needs additional citations for verification.

Disc brake on a motorcycle.

A brake is a device which inhibits motion. Its opposite component is a clutch. The rest of this article is dedicated to various types of vehicular brakes. Most commonly brakes use friction to convert kinetic energy into heat, though other methods of energy conversion may be employed. For exampleregenerative braking converts much of the energy to electrical energy, which may be stored for later use. Other methods convert kinetic energy intopotential energy in such stored forms as pressurized air or pressurized oil. Still other braking methods even transform kinetic energy into different forms, for example by transferring the energy to a rotating flywheel. Brakes are generally applied to rotating axles or wheels, but may also take other forms such as the surface of a moving fluid (flaps deployed into water or air). Some vehicles use a combination of braking mechansims, such as drag racing cars with both wheel brakes and a parachute, or airplanes with both wheel brakes and drag flaps raised into the air during landing. Since kinetic energy increases quadratically with velocity (K

= mv2 / 2), an object traveling at 10

kilometers per second has 100 times as much energy as one traveling at 1 kilometer per second, and consequently the theoretical braking distance, when braking at the traction limit, is 100 times as long. In practice, fast vehicles usually have significant air drag, and energy lost to air drag rises quickly with speed. Almost all wheeled vehicles have a brake of some sort. Even baggage carts and shopping carts may have them for use on a moving ramp. Most fixed-wing aircraft are fitted with wheel brakes on the undercarriage. Some aircraft also feature air brakes designed to reduce their speed in flight. Notable examples include gliders and some World War II-era aircraft, primarily some fighter aircraft and many dive

bombers of the era. These allow the aircraft to maintain a safe speed in a steep descent. The Saab B 17dive bomber used the deployed undercarriage as an air brake. Friction brakes on automobiles store braking heat in the drum brake or disc brake while braking then conduct it to the air gradually. When traveling downhill some vehicles can use their engines to brake. When the brake pedal is pushed a piston pushes the pad towards the brake disc which slows the wheel down. On the brake drum it is similar as the cylinder pushes the brake shoes towards the drum which also slows the wheel down.
Contents
[hide]

1 Types 2 Characteristics

2.1 Brake boost

3 Noise 4 Inefficiency 5 See also 6 References 7 External links

[edit]Types
Brakes may be broadly described as using friction, pumping, or electromagnetics. One brake may use several principles: for example, a pump may pass fluid through an orifice to create friction. Frictional brakes are most common and can be divided broadly into "shoe" or "pad" brakes, using an explicit wear surface, and hydrodynamic brakes, such as parachutes, which use friction in a working fluid and do not explicitly wear. Typically the term "friction brake" is used to mean pad/shoe brakes and excludes hydrodynamic brakes, even though hydrodynamic brakes use friction. Friction (pad/shoe) brakes are often rotating devices with a stationary pad and a rotating wear surface. Common configurations include shoes that contract to rub on the outside of a rotating drum, such as a band brake; a rotating drum with shoes that expand to rub the inside of a drum, commonly called a "drum brake", although other drum configurations are possible; and pads that pinch a rotating disc, commonly called a "disc brake". Other brake configurations are used, but less often. For example, PCC trolley brakes include a flat shoe which is clamped to the rail with an electromagnet; theMurphy brake pinches a rotating drum, and the Ausco Lambert disc brake uses a hollow disc (two parallel discs with a structural bridge) with shoes that sit between the disc surfaces and expand laterally. Pumping brakes are often used where a pump is already part of the machinery. For example, an internalcombustion piston motor can have the fuel supply stopped, and then internal pumping losses of the engine

create some braking. Some engines use a valve override called a Jake brake to greatly increase pumping losses. Pumping brakes can dump energy as heat, or can be regenerative brakes that recharge a pressure resivoir called an hydraulic accumulator. Electromagnetic brakes are likewise often used where an electric motor is already part of the machinery. For example, many hybrid gasoline/electric vehicles use the electric motor as a generator to charge electric batteries and also as a regenerative brake. Some diesel/electric railroad locomotives use the electric motors to generate electricity which is then sent to a resistor bank and dumped as heat. Some vehicles, such as some transit buses, do not already have an electric motor but use a secondary "retarder" brake that is effectively a generator with an internal short-circuit.

[edit]Characteristics
Brakes are often described according to several characteristics including:

peak force The peak force is the maximum decelerating effect that can be obtained. The peak force is often greater than the traction limit of the tires, in which case the brake can cause a wheel skid.

continuous power dissipation Brakes typically get hot in use, and fail when the temperature gets too high. The greatest amount of power (energy per unit time) that can be dissipated through the brake without failure is the continuous power dissipation. Continuous power dissipation often depends on e.g., the temperature and speed of ambient cooling air.

fade As a brake heats, it may become less effective, called brake fade. Some designs are inherently prone to fade, while other designs are relatively immune. Further, use considerations, such as cooling, often have a big effect on fade.

smoothness A brake that is grabby, pulses, has chatter, or otherwise exerts varying brake force may lead to skids. For example, railroad wheels have little traction, and friction brakes without an anti-skid mechanism often lead to skids, which increases maintenance costs and leads to a "thump thump" feeling for riders inside.

power Brakes are often described as "powerful" when a small human application force leads to a braking force that is higher than typical for other brakes in the same class. This notion of "powerful" does not relate to continuous power dissipation, and may be confusing in that a brake may be "powerful" and brake strongly with a gentle brake application, yet have lower (worse) peak force than a less "powerful" brake.

Pedal Feel Brake pedal feel encompasses subjective perception of brake power output as a function of pedal travel. Pedal travel is influenced by the fluid displacement of the brake and other factors.

Drag Brakes have varied amount of drag in the off-brake condition depending on design of the system to accommodate total system compliance and deformation that exists under braking with ability to retract friction material from the rubbing surface in the off-brake condition.

durability Friction brakes have wear surfaces that must be renewed periodically. Wear surfaces include the brake shoes or pads, and also the brake disc or drum. There may be tradeoffs, for example a wear surface that generates high peak force may also wear quickly.

weight Brakes are often "added weight" in that they serve no other function. Further, brakes are often mounted on wheels, and unsprung weight can significantly hurt traction in some circumstances. "Weight" may mean the brake itself, or may include additional support structure.

noise Brakes usually create some minor noise when applied, but often create squeal or grinding noises that are quite loud.

[edit]Brake

boost

Most modern vehicles are equipped with a brake boost system that greatly increases the force applied to the vehicle's brakes by its operator.[1] This additional force is supplied by the vacuum generated by the running engine, but this force is greatly reduced when the engine is running at full throttle and the available vacuum is diminished. Because of this, reports of unintended acceleration are often accompanied by complaints of failed or weakened brakes, as the high-revving engine is unable to provide enough vacuum to power the brake booster. This problem is exacerbated in vehicles equipped with automatic transmissions as the vehicle will automatically downshift upon application of the brakes, thereby further elevating engine RPMand reducing available braking power while increasing the engine's effective torque.

[edit]Noise

Brake lever on a horse-drawn hearse.

Main article: Roadway noise Although ideally a brake would convert all the kinetic energy into heat, in practice a significant amount may be converted into acoustic energy instead, contributing to noise pollution. For road vehicles, the noise produced varies significantly with tire construction, road surface, and the magnitude of the deceleration.[2] Noise can be caused by different things. These are signs that there may be issues with brakes wearing out.[3]

[edit]Inefficiency

A significant amount of energy is always lost while braking, even with regenerative braking which is not perfectly efficient. Therefore a good metric of efficient energy use while driving is to note how much one is braking. If the majority of deceleration is from unavoidable friction instead of braking, one is squeezing out most of the service from the vehicle. Minimizing brake use is one of the fuel economy-maximizing behaviors. While energy is always lost during a brake event, a secondary factor that influences efficiency is "off-brake drag", or drag that occurs when the brake is not intentionally actuated. After a braking event, hydraulic pressure drops in the system , allowing the brake caliper pistons to retract. However, this retraction must accommodate all compliance in the system (under pressure) as well as thermal distortion of components like the brake disc or the brake system will drag until the contact with the disc, for example, knocks the pads and pistons back from the rubbing surface. During this time, there can be significant brake drag. This brake drag can lead to significant parasitic power loss, thus impact fuel economy and vehicle performance.

[edit]See

also

Archaic past tense of break (see brake) Air brake (aircraft) Air brake (rail) Air brake (road vehicle) Anchor Bicycle brake systems Brake-by-wire (or electromechanical braking) Brake lining Brake bleeding Brake override system Brake pad Railway brake Brake shoe Breeching (tack) Bundy tube Disc brake Drum brake

Dynamic (Rheosta

Electromagnetic b

Electronic Parking Electronic wedge Engine braking Hand brake Hydraulic brake

Jake brake also kn Line lock Overrun brake Parking brake Railway brake

Regenerative brak

Threshold braking Trail braking Vacuum brake Vehicle brake