Nagar Yuwak Shikshan Sansthas

Yeshwantrao Chavan College of Engineering

Hingna Road, Wanadongri, Nagpur - 441 110

Even Term 2013-2014

ET317

Digital Signal Processing

Assignment No: 3
Q.1 For the following analog transfer function, determine H(z) using impulse invariant technique. Given T=1sec.

A)

H a ( s)

2 ( s 1)( s 2)

B)

H a (s)

2 s 2s 1
2

C) Q.2

H a ( s)

1 ( s 0.5)( s 0.5s 2)
2

D)

H a ( s)

2s ( s 0.2s 1)
2

Determine the digital transfer functions obtained by transforming the following causal analog transfer functions using the impulse invariant method. Assume T=0.3 sec.

A)

H a ( s)

4(3s 7) ( s 2)( s 2 4s 5)

B)

H a ( s)
H a ( s)

8s 2 37 s 56 ( s 4)( s 2 2s 10)
2s ( s 1)( s 2 s 1)

C) Q.3

H a (s)

s 3 s 2 6s 14 ( s 2 s 4)( s 2 2s 5)

D)

The following causal IIR digital transfer functions were designed using the impulse invariance method with T=0.2 sec. Determine their respective parent causal analog transfer functions.

A)

G1 ( z )

3z 4z 1.5 z e z e1.8

B)

G2 ( z )

ze1.2 sin(1.5) z 2 2 ze1.2 cos(1.5) e2.4

Q.4

The following causal IIR digital transfer functions were designed using the Bilinear transformation method with T=0.5 sec. Determine their respective parent causal analog transfer functions.

A)

4( z 2 3z 4) G1 ( z ) 10 z 2 4 z 6

B)

54 z 3 62 z 2 26 z 18 G2 ( z ) (3z 1)(12 z 2 4 z 8)

Q.5

Determine H(z) using impulse invariant technique for the analog system defined by

H a ( s)
Q.6

0.30325z 2 0.2194 z 1 and show that if T=15 . H ( z ) z 3 0.8835 z 2 0.774 z 0.3675 ( s 0.5)( s 2 0.5s 2)

Determine the digital transfer functions obtained by transforming the following causal analog transfer functions using the Bilinear transformation method. Assume T=1 sec.

A)

H a ( s)

2 ( s 1)( s 2)

B)

H a ( s) H a ( s) H a ( s) H a ( s)

2s ( s 0.2s 1)
2

C)

H a ( s)
H a ( s) H a ( s)

s3 ( s 1)( s 2 s 1)
2 ( s 1)2 1 ( s 1) ( s 2) 2

D)

2 ( s 1)( s 2) 1 ( s 0.2)2 16 s 0.1 ; ( s 0.1)2 9 T 0.1sec

E) G) Q.7

F) H)

Design a digital Butterworth filter to meet the following constraint. Assume T=1 sec.
0.8 H (e j ) 0.1, H (e j ) 0.2, 0 0.2 0.26

A) using the Bilinear transformation

B) using the Impulse Invariant transformation

Q.8

Design a digital Butterworth filter to meet the following constraint. Assume T=1 sec.
0.9 H (e j ) 1, H (e j ) 0.2, 0 0.25 0.6

A) using the Bilinear transformation Q.9

B) using the Impulse Invariant transformation

Design and realize a digital LPF using Bilinear transformation to satisfy the following requirements. a) Monotonic stopband and passband b) -3dB cutoff frequency at 0.6 radians c) Magnitude down at 15dB at 0.75 radians.

Q.10 Use the Bilinear transformation to design a Butterworth filter satisfying the constraints:
0.8 H (e j ) 1, H (e j ) 0.2, 0 0.2 0.6

Q.11 Design a low pass Digital Butterworth filter with the following specifications. Use the Impulse Invariant transformation ;
0.89 H (e j ) 1, H (e j ) 0.17783, 0 0.2 0.6

Q.12 Design a Digital Butterworth low pass filter to meet the following specifications. Use the Bilinear transformation;
1 H (e j ) 1, 2 H (e j ) 0.2, 0 3 4

Q.13 Design a Digital IIR Butterworth low pass filter using Bilinear transformation with the following specifications:
i) Passband ripple 1.5 dB up to 4 rad/sec. ii) Stopband attenuation 20 dB beyond 8 rad/sec iii) Sampling frequency 25 Hz. iv) Also draw the structure of the filter which you have designed.

Q.14 Design a low pass Digital Butterworth filter with the following specifications. Use the Bilinear transformation ;
0.89125 H (e j ) 1, H (e j ) 0.17783, 0 0.2 0.3

Q.15 Design a low pass Digital Butterworth filter with the following specifications. Use the Impulse Invariant transformation ;
0.89125 H (e j ) 1, H (e j ) 0.17783, 0 0.2 0.3

Q.16 A digital low pass filter is required to meet the following specifications : Passband ripple: 1 dB Passband edge: 4 kHz Stopband attenuation: 40 dB Stopband edge: 6 kHz Sample rate: 24 kHz

The filter is to be designed by performing a bilinear transformation on an analog system function. Determine what order Butterworth and Chebyshev analog designs must be used to meet the specifications in the digital implementation. Q.17 An IIR digital low pass filter is required to meet the following specifications : Passband ripple (Peak to peak ripple): 0.5 dB Passband edge: 1.2 kHz Stopband attenuation: 40 dB Stopband edge: 2 kHz Sample rate: 8 kHz

Design the filter by using Butterworth filter approximation. Q.18 An IIR digital low pass filter is required to meet the following specifications : Passband ripple (Peak to peak ripple): 0.5 dB Passband edge: 1.2 kHz Stopband attenuation: 40 dB Stopband edge: 2 kHz Sample rate: 8 kHz

Design the filter by using Chebyshev analog designs. Q.19 Determine the system function H(z) of the lowest-order Chebyshev digital filter that meets the following specifications:
0.5 dB ripple in the passband

0 0.24

At least 50 dB attenuation in the stopband Use the bilinear transformation.

0.35

Q.20 For the constraints

1 H (e j ) 1, 2 H (e j ) 0.2,

0 0.2 0.6

With T=1 sec determine H(z) for a Butterworth filter using The bilinear transformation and Impulse invariant transformation.

Q.21 For the constraints

1 H (e j ) 1, 2 H (e j ) 0.1,

0 0.2 0.4

With T=1 sec determine H(z) for a Butterworth filter using The bilinear transformation and Impulse invariant transformation.

Q.22 For the constraints

With T=1 sec determine H(z) for a Butterworth filter using The bilinear transformation and Impulse invariant transformation.

Q.23 For the constraints

With T=1 sec determine H(z) for a Chebyshev filter using the bilinear transformation. Q.24 For the constraints

1 H (e j ) 1, 2 H (e j ) 0.1,

0 0.2 0.4

With T=1 sec determine H(z) for a Chebyshev filter using the bilinear transformation.

Q.25 For the constraints

1 H (e j ) 1, 2 H (e j ) 0.1,

0 0.2 0.5

With T=1 sec determine H(z) for a Chebyshev filter using the bilinear transformation. Q.26 For the constraints

1 H (e j ) 1, 2 H (e j ) 0.1,

0 0.2 0.5

With T=1 sec determine H(z) for a Butterworth filter using the bilinear transformation. Q.27 Design a digital Butterworth filter satisfying the constraints

1 H (e j ) 1, 2 H (e j ) 0.2,

0 0.5 0.75

With T=1 sec determine H(z) for a Butterworth filter using the bilinear transformation. Q.28 Design a digital Chebyshev filter to meet the constraints
0.8 H (e j ) 1, H (e j ) 0.2, 0 0.2 0.6

With T=1 sec determine H(z) using the bilinear transformation. Q.29 Design a digital Butterworth filter to meet the constraints
0.8 H (e j ) 1, H (e j ) 0.2, 0 0.2 0.26

With T=1 sec determine H(z) using the bilinear transformation. Q.30 Design a digital Butterworth filter to meet the constraints
0.9 H (e j ) 1, H (e j ) 0.2, 0 0.25 0.6

With T=1 sec determine H(z) using the bilinear transformation