2012 Jeep Liberty Owners Manual

2012
OWNERS MANUAL
Liberty
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, dont drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle. Chrysler Group LLC reserves the right to make changes in design and specifications, and/or make additions to or improvements to its products without imposing any obligation upon itself to install them on products previously manufactured.
WARNING!
Driving after drinking can lead to an accident. Your perceptions are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive.
Copyright 2011 Chrysler Group LLC
SECTION 1 2 3 4 5 6 7 8 9 10
TABLE OF CONTENTS
PAGE
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 STARTING AND OPERATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455 MAINTENANCE SCHEDULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505 IF YOU NEED CONSUMER ASSISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523 INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533
1 2 3 4 5 6 7 8 9 10
INTRODUCTION
CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 7 Rollover Warning . . . . . . . . . . . . . . . . . . . . . . . 4 Vehicle Identification Number .............. 7 How To Use This Manual . . . . . . . . . . . . . . . . . . 5 Vehicle Modifications/Alterations . . . . . . . . . . . . 8
4 INTRODUCTION
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owners Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents. Please take the time to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained technicians and genuine MOPAR parts, and cares about your satisfaction. ROLLOVER WARNING Utility vehicles have a significantly higher rollover rate than other types of vehicles. This vehicle has a higher ground clearance and a higher center of gravity than many passenger cars. It is capable of performing better in a wide variety of off-road applications. Driven in an unsafe manner, all vehicles can go out of control. Because of the higher center of gravity, if this vehicle is out of control it may roll over when some other vehicles may not.
NOTE: After reviewing the owner information, it Do not attempt sharp turns, abrupt maneuvers, or other should be stored in the vehicle for convenient referenc- unsafe driving actions that can cause loss of vehicle ing and remain with the vehicle when sold. control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully.
INTRODUCTION 5
two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicles equipment.
Rollover Warning Label
The detailed index at the back of this Owners Manual contains a complete listing of all subjects.
Failure to use the driver and passenger seat belts pro- Consult the following table for a description of the vided is a major cause of severe or fatal injury. In fact, the symbols that may be used on your vehicle or throughout U.S. government notes that the universal use of existing this Owners Manual: seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by
6 INTRODUCTION
INTRODUCTION 7
WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is found on the left front corner of the instrument panel. The VIN is visible from outside of the vehicle through the windshield. This number also is stamped into the right front door sill (under the molding) and appears on the Automobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration, and the title.
Vehicle Identification Number
8 INTRODUCTION
VEHICLE MODIFICATIONS/ALTERATIONS
WARNING!
Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Stamped VIN Location
NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

CONTENTS
A Word About Your Keys . . . . . . . . . . . . . . . . . 12 Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 Key-In-Ignition Reminder . . . . . . . . . . . . . . . 14 Sentry Key . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Replacement Keys . . . . . . . . . . . . . . . . . . . . . 16 Customer Key Programming . . . . . . . . . . . . . 16 General Information . . . . . . . . . . . . . . . . . . . 17 Vehicle Security Alarm If Equipped . . . . . . . . 18 Rearming Of The System . . . . . . . . . . . . . . . . 18 To Arm The System . . . . . . . . . . . . . . . . . . . 18 To Disarm The System . . . . . . . . . . . . . . . . . 19 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . 20 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . 20 To Unlock The Doors And Liftgate . . . . . . . . . 21 To Lock The Doors And Liftgate . . . . . . . . . . 22 To Unlatch The Liftgate Flipper Glass . . . . . . . 24 Using The Panic Alarm . . . . . . . . . . . . . . . . . 24 Programming Additional Transmitters . . . . . . 25
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Battery Replacement . . . . . . . . . . . . . . . . . . . 25 Liftgate General Information . . . . . . . . . . . . . . . . . . . 26 How To Use Remote Start . . . . . . . . . . . . . . . 27 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Manual Door Locks . . . . . . . . . . . . . . . . . . . 30 Power Door Locks . . . . . . . . . . . . . . . . . . . . 31 Child-Protection Door Lock System Rear Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Power Windows . . . . . . . . . . . . . . . . . . . . . . 35 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 39
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Liftgate Flipper Glass . . . . . . . . . . . . . . . . . . 40 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . 45 Lap/Shoulder Belt Untwisting Procedure . . . . 50 Seat Belt Lock Out . . . . . . . . . . . . . . . . . . . . 51 Seat Belts In Passenger Seating Positions . . . . . 51 Automatic Locking Retractor Mode (ALR) If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 51 Energy Management Feature . . . . . . . . . . . . . 52 Seat Belt Pretensioner . . . . . . . . . . . . . . . . . . 53 Supplemental Active Head Restraints (AHR) . . 53 Enhanced Seat Belt Use Reminder System (BeltAlert) . . . . . . . . . . . . . . . . . . . . . . . . . 57
Remote Starting System If Equipped . . . . . . . 27 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 42
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11
Seat Belts And Pregnant Women . . . . . . . . . . 58 Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 58 Supplemental Restraint System (SRS) Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Air Bag Deployment Sensors And Controls . . . 65 Event Data Recorder (EDR) . . . . . . . . . . . . . . 77 Child Restraints . . . . . . . . . . . . . . . . . . . . . . 78 Engine Break-In Recommendations . . . . . . . . . . 88
Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Transporting Passengers . . . . . . . . . . . . . . . . 88 Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . 89 Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . . . . . . . . . . 92
The authorized dealer that sold you your new vehicle has A WORD ABOUT YOUR KEYS You can insert the double-sided keys into the locks with the key code numbers for your vehicle locks. These either side up. numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic Transmission Place the shift lever in PARK. Turn the key to the ACC position and then push the key and cylinder inward slightly and rotate the key to the LOCK position. Then remove the key.
Vehicle Key
NOTE: For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), features such as the power window switches, radio, power sunroof or Sky Slider (if equipped), and power outlets will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, features such as the power window switches, radio, power sunroof or Sky Slider (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features) in Understanding Your Instrument Panel for further information.
Ignition Switch Positions

1 LOCK 2 ACC (ACCESSORY) 3 ON 4 START
WARNING!
When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. Do not leave the key fob in or near the vehicle, and do not leave the ignition in the ACC or ON/RUN position. A child could operate power windows, other controls, or move the vehicle. Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
CAUTION!
An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition, and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder If you open the drivers door and the key is in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position. SENTRY KEY The Sentry Key Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation
is automatic, regardless of whether the vehicle is locked someone used an invalid key to try to start the engine. or unlocked. Either of these conditions will result in the engine being shut off after two seconds. The system uses ignition keys that have an embedded electronic chip (transponder) to prevent unauthorized If the Vehicle Security Light turns on during normal vehicle operation. Therefore, only keys that are pro- vehicle operation (vehicle running for longer than 10 secgrammed to the vehicle can be used to start and operate onds), it indicates that there is a fault in the electronics. the vehicle. The system will shut the engine off in two Should this occur, have the vehicle serviced as soon as seconds if someone uses an invalid key to try to start the possible by an authorized dealer. engine. NOTE: A key that has not been programmed is also considered an invalid key, even if it is cut to fit the ignition switch lock cylinder for that vehicle.
CAUTION!
The Sentry Key Immobilizer system is not compatible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection.
During normal operation, after turning on the ignition switch, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the All of the keys provided with your new vehicle have bulb check, it indicates that there is a problem with the been programmed to the vehicle electronics. electronics. In addition, if the Vehicle Security Light begins to flash after the bulb check, it indicates that
procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one NOTE: Only keys that are programmed to the vehicle that has never been programmed. electronics can be used to start and operate the vehicle. Once a Sentry Key is programmed to a vehicle, it cannot NOTE: When having the Sentry Key Immobilizer be programmed to any other vehicle. System serviced, bring all vehicle keys with you to an authorized dealer. Replacement Keys
CAUTION!
Always remove the Sentry Keys from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is required for authorized dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by following the customer key programming
Customer Key Programming If you have two valid Sentry Keys, you can program new Sentry Keys to the system by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.
NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the systems memory. This will prevent the lost key from starting 4. Insert a blank Sentry Key into the ignition switch. your vehicle. The remaining keys must then be reproTurn the ignition switch to the ON/RUN position within grammed. All vehicle keys must be taken to an authorized 60 seconds. After 10 seconds, a single chime will sound. dealer at the time of service to be reprogrammed. In addition, the Vehicle Security Light will stop flashing. General Information To indicate that programming is complete, the Vehicle The Sentry Key system complies with FCC rules Part 15 Security Light will turn on again for three seconds and and with RSS-210 of Industry Canada. Operation is then turn off. subject to the following conditions: The new Sentry Key is programmed. The Remote This device may not cause harmful interference. Keyless Entry (RKE) transmitter will also be pro This device must accept any interference that may be grammed during this procedure. received, including interference that may cause undesired operation.
3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key.
Repeat this procedure to program up to eight keys. If you do not have a programmed Sentry Key, contact your authorized dealer for details.
VEHICLE SECURITY ALARM IF EQUIPPED The Vehicle Security Alarm monitors the vehicle doors, liftgate, and liftgate flipper glass for unauthorized entry and ignition for unauthorized operation. While the Vehicle Security Alarm is armed, interior switches for door locks and flipper glass are disabled.
one should go off in the future, you will need to know which mode has been activated in order to deactivate it.
Rearming Of The System If something triggers the Vehicle Security Alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn off the horn after three minutes, turn off all of If something triggers the alarm, the Vehicle Security the visual signals after 15 minutes, and then the Vehicle Alarm will sound the horn intermittently, the headlights, Security Alarm will rearm itself. park lamps and/or turn signals and the Vehicle Security To Arm The System Light in the instrument cluster will flash for three minutes. If the disturbance is still present (drivers door, 1. Remove the key from the ignition switch and exit the passenger door, other doors, ignition) after three minutes, vehicle. the headlights, park lamps and/or turn signals will flash 2. Lock the doors and liftgate by pressing the power door for an additional 15 minutes. LOCK switch or the LOCK button on the Remote Keyless NOTE: The Panic and Security alarms are quite differ- Entry (RKE) transmitter. ent. Please take a moment to activate the Panic and the NOTE: The Vehicle Security Alarm will not arm if you Security modes to hear the differences in the horn. In case lock the doors with the manual door lock plungers or the drivers door lock cylinder.
3. Close all doors. The Vehicle Security Light in the instrument cluster will flash rapidly for about 16 seconds to signal that the Vehicle Security Alarm is arming. During this period, opening any door or the liftgate will cancel the arming process. If the Vehicle Security Alarm is set successfully, the Vehicle Security Light will flash at a slower rate to indicate the alarm is armed.
When the Vehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.
The Vehicle Security Alarm is designed to protect your vehicle; however, you can create conditions where the Vehicle Security Alarm will give you a false alarm. If the previously described arming sequence has occurred, the Vehicle Security Alarm will arm regardless of whether NOTE: For added security, whenever the Security you are inside or outside the vehicle. If you remain inside Alarm is armed, the HomeLink/Garage Door Opener the vehicle and open a door, the alarm will sound. If this (if equipped) is disabled as well. occurs, disarm the Vehicle Security Alarm. To Disarm The System Either press the UNLOCK button on the RKE transmitter or insert a valid Sentry Key into the ignition lock cylinder and turn the key to the ON/RUN position. NOTE: Unlocking the doors with the manual door lock plungers or the drivers door lock cylinder will not disarm the Vehicle Security Alarm. Tamper Alert If something has triggered the Vehicle Security Alarm in your absence, the horn will sound three times and the exterior lights blink three times when you unlock the doors. Check the vehicle for tampering.
ILLUMINATED ENTRY The Illuminated Entry system will not operate if the The courtesy lights will turn on when you use the dimmer control is in the Dome defeat position Remote Keyless Entry (RKE) transmitter to unlock the (extreme bottom position). doors or open any door. REMOTE KEYLESS ENTRY (RKE) This feature also turns on the approach lighting in the This system allows you to lock or unlock the doors and outside mirrors (if equipped). Refer to Mirrors in liftgate, open the liftgate flip-up window, or activate the Understanding The Features Of Your Vehicle for fur- PANIC alarm from distances up to approximately 66 ft ther information. (20 m) using a hand-held Remote Keyless Entry (RKE) The lights will fade to off after approximately 30 seconds transmitter. The RKE transmitter does not need to be or they will immediately fade to off once the ignition pointed at the vehicle to activate the system. However, the line of transmission must not be blocked with metal switch is turned to ON/RUN from the OFF position. objects when using the RKE transmitter. NOTE: The front courtesy overhead console and door cour- NOTE: Inserting the key into the ignition switch distesy lights will turn on if the dimmer control is in the ables all buttons on the RKE transmitter. Dome ON position (extreme top position).
Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the drivers door or all doors and the liftgate on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed as follows: For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features) in Understanding Your Instrument Panel for further information.
Vehicle Key
For vehicles not equipped with the EVIC, perform the following steps: 1. Press and hold the LOCK button on a programmed (i.e., functional) RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK button while still holding the LOCK button. 2. Release both buttons at the same time.
To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the drivers door or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
3. Test the feature from outside the vehicle by pressing To Lock The Doors And Liftgate the LOCK and UNLOCK buttons on the RKE transmitter. Press and release the LOCK button on the RKE transmitter to lock all doors and the liftgate. The turn signal lights 4. Repeat these steps if you want to return this feature to will flash and the horn will chirp to acknowledge the lock its previous setting. signal. NOTE: Pressing the LOCK button on the RKE transmitSound Horn With Lock ter while you are inside the vehicle will activate the This feature will cause the horn to chirp when the doors Security Alarm. Opening a door with the Security Alarm are locked with the RKE transmitter. This feature can be activated will cause the alarm to sound. Press the UNturned on or turned off. To change the current setting, LOCK button to deactivate the Security Alarm. proceed as follows: Illuminated Approach If Equipped For vehicles equipped with the Electronic Vehicle This feature activates the headlights for up to 90 seconds Information Center (EVIC), refer to Electronic Vehicle when the doors are unlocked with the RKE transmitter. Information Center (EVIC)/Personal Settings The time for this feature is programmable on vehicles (Customer-Programmable Features) in Understandequipped with the Electronic Vehicle Information Center ing Your Instrument Panel for further information. (EVIC). Refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features) in Understanding Your Instrument Panel for further information.
For vehicles not equipped with the EVIC, perform the Flash Lights With Lock The feature will cause the turn signal lights to flash when following steps: the doors are locked or unlocked with the RKE transmit1. Press the LOCK button on a programmed (i.e., functer. This feature can be turned on or turned off. To change tional) RKE transmitter for at least 4 seconds, but no the current setting, proceed as follows: longer than 10 seconds. Then, press the PANIC button For vehicles equipped with the Electronic Vehicle while still holding the LOCK button. Information Center (EVIC), refer to Electronic Vehicle 2. Release both buttons at the same time. Information Center (EVIC)/Personal Settings (Customer-Programmable Features) in Understand3. Test the feature from outside the vehicle by pressing ing Your Instrument Panel for further information. the LOCK button on the RKE transmitter. 4. Repeat these steps if you want to return this feature to For vehicles not equipped with the EVIC, perform the following steps: its previous setting. NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 1. Press and hold the UNLOCK button on a programmed (i.e., functional) RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time.
3. Test the feature from outside the vehicle by pressing Using The Panic Alarm the LOCK and UNLOCK buttons on the RKE transmitter. NOTE: The PANIC and Security Alarms are quite 4. Repeat these steps if you want to return this feature to different. Please take a moment to activate the PANIC and the Security modes to hear the differences in the its previous setting. horn. In case one should go off in the future, you will NOTE: Pressing the LOCK button on the RKE transmitneed to know which mode has been activated in order to ter while you are inside the vehicle will activate the deactivate it. Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UN- To turn the PANIC Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at LOCK button to deactivate the Security Alarm. least one second and release. When the PANIC Alarm is To Unlatch The Liftgate Flipper Glass on, the headlights and turn signal lights will flash, the Press the FLIPPER GLASS button twice to unlatch the horn will pulse on and off, and the illuminated entry liftgate flipper glass. system will turn on.
WARNING!
To avoid injury stand back when opening. Glass will automatically rise.
The PANIC Alarm will stay on for three minutes unless you turn it off by pressing the PANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater.
During the PANIC Mode, the door locks and Remote Battery Replacement Keyless Entry (RKE) system will function normally. The recommended replacement battery is CR2032. PANIC mode will not disarm the Security System on NOTE: vehicles so equipped. Perchlorate Material special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate NOTE: You may need to be close to the vehicle when using the RKE transmitter to turn off the PANIC Alarm Do not touch the battery terminals that are on the back due to the radio frequency noises emitted by the system. housing or the printed circuit board. Programming Additional Transmitters 1. Remove the screw from the RKE transmitter case (if Refer to Sentry Key Customer Key Programming. equipped). If you do not have a programmed RKE transmitter, contact your authorized dealer for details.
2. With the RKE transmitter buttons facing down, use a flat blade tool to pry the two halves of the RKE transmitter case apart. Make sure not to damage the seal during removal.
3. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To reassemble the RKE transmitter case, snap the two halves together. 5. Reinstall and tighten the screw until snug (if equipped). General Information This device complies with Part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference.
Separating Case Halves
2. This device must accept any interference that may be received including interference that may cause undesired operation.
NOTE: Changes or modifications not expressly ap- NOTE: proved by the party responsible for compliance could The vehicle must be equipped with an automatic transmission to be equipped with Remote Start. void the users authority to operate the equipment. If your RKE transmitter fails to operate from a normal Obstructions between the vehicle and RKE transmitter may reduce this range. distance, check for these two conditions: 1. Weak battery in RKE transmitter. The expected life of How To Use Remote Start All of the following conditions must be met before the the battery is from one to two years. engine will remote start: 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or CB radios. Shift lever in PARK. REMOTE STARTING SYSTEM IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m). Doors closed. Hood closed. Liftgate closed. Hazard switch off. Brake switch inactive (brake pedal not pressed). Ignition key removed from ignition switch.
Battery at an acceptable charge level.
Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) If Equipped RKE PANIC button not pressed. The following messages will display in the EVIC if the System not disabled from previous remote start event vehicle fails to remote start or exits remote start prematurely: Vehicle theft alarm not active Remote Start Aborted Door Ajar
WARNING!
Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled. Keep Remote Keyless Entry (RKE) transmitters away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death.
Remote Start Aborted Hood Ajar Remote Start Aborted L/Gate Ajar Remote Start Aborted System Fault Remote Start Aborted Fuel Low The EVIC message stays active until the ignition is turned to the ON/RUN position.
To Enter Remote Start Mode The engine can be started two consecutive times (two Press and release the REMOTE START button 15-minute cycles) with the RKE transmitter. However, on the RKE transmitter twice within five secthe ignition switch must be cycled to the ON/RUN onds. The parking lights will flash and the horn position before you can repeat the start sequence for a will chirp twice (if programmed). Then, the third cycle. engine will start and the vehicle will remain in the To Exit Remote Start Mode Without Driving The Remote Start mode for a 15-minute cycle. Vehicle Press and release the REMOTE START button one time or NOTE: If your power door locks were unlocked, Remote Start allow the engine to run for the entire 15-minute cycle. will automatically lock the doors. NOTE: To avoid unintentional shut downs, the system If an engine fault is present or fuel level is low, the will disable the one-time press of the REMOTE START vehicle will start and then shut down in 10 seconds. button for two seconds after receiving a valid Remote Start request. For security, power window operation and sunroof or Sky Slider operation (if equipped) is disabled when the vehicle is in the Remote Start mode.
To Exit Remote Start Mode And Drive The Vehicle Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON/RUN position. NOTE: The ignition switch must be in the ON/RUN position in order to drive the vehicle. DOOR LOCKS Manual Door Locks To lock each door, push the door lock knob on each door Manual Lock Knob trim panel downward. To unlock each door, pull the door If the door lock knob is down when you shut the door, lock knob on each door trim panel upward. the door will lock. Make sure the keys are not inside the vehicle before closing the door. NOTE: The manual door locks will not lock or unlock the liftgate.
WARNING!
For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. Do not leave the key fob in or near the vehicle, and do not leave the ignition in the ACC or ON/RUN position. A child could operate power windows, other controls, or move the vehicle.
Power Door Locks A power door lock switch is located on each of the front door trim panels. Use this switch to lock or unlock the doors and liftgate.
Power Door Lock Switch Location

1 - Unlock 2 - Lock
If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key. Automatic Door Locks If Equipped When enabled, the door locks will lock automatically when the vehicles speed exceeds 15 mph (24 km/h). The auto door lock feature can be enabled or disabled by your authorized dealer per written request of the customer. Please see your authorized dealer for service.
2. The transmission is in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in NEUTRAL or PARK. 4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors On Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows:
For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to Electronic Vehicle Automatic Unlock Doors On Exit Information Center (EVIC)/Personal Settings The doors will unlock automatically on vehicles with (Customer-Programmable Features) in Understandpower door locks if: ing Your Instrument Panel for further information. 1. The Automatic Unlock Doors On Exit feature is enabled.
For vehicles not equipped with the EVIC, perform the Repeat these steps if you want to return this feature to its following procedure: previous setting. 1. Close all doors and place the key in the ignition. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
2. Cycle the ignition switch between OFF and ON/RUN and then back to OFF five times, ending up in the Child-Protection Door Lock System Rear Doors ON/RUN position. To provide a safer environment for small children riding 3. Press the power door UNLOCK switch to unlock the in the rear seats, the rear doors are equipped with a doors. Child-Protection Door Lock system. 4. A single chime will indicate the completion of the programming.
To use the system, open each rear door, use a flat blade NOTE: screwdriver (or ignition key) and rotate the dial counter- When the child lock system is engaged, the door can be opened only by using the outside door handle even clockwise to engage the Child-Protection lock and clockthough the inside door lock is in the unlocked posiwise to disengage the Child-Protection locks. When the tion. system on a door is engaged, that door can only be opened by using the outside door handle even if the After disengaging the Child-Protection Door Lock inside door lock is in the unlocked position. system, always test the door from the inside to make certain it is in the desired position. After engaging the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window, and open the door with the outside door handle.
Child-Protection Door Lock
WARNING!
Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged. WINDOWS Power Windows The window controls on the drivers door trim panel control all the door windows.
Power Window Switches
There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition switch is in the ON/RUN or ACC position.
WARNING!
Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Auto-Down Feature The drivers and front passengers (if equipped for passenger side) power window switches have an AutoDown feature. Press the window switch past the first detent, release, and the window will go down automatically.
To stop the window from going all the way down during the Auto-Down operation, pull up on the switch briefly. For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time is programmable. Refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features) in Understanding Your Instrument To open the window part way, press the window switch Panel for further information. to the first detent and release it when you want the window to stop.
Auto Up Feature With Anti-Pinch Protection If Equipped On some models, the drivers and front passengers (if equipped for passenger side) power window switches have an Auto Up feature. Pull the window switch fully upward to the second detent, release, and the window will go up automatically.
To stop the window from going all the way up during the Auto Up operation, push down on the switch briefly. NOTE: If the window runs into any obstacle during autoTo close the window part way, pull the window switch closure, it will reverse direction and then go back up to the first detent and release when you want the down. Remove the obstacle and use the window window to stop. switch again to close the window. For vehicles not equipped with the Electronic Vehicle Any impact due to rough road conditions may trigger Information Center (EVIC), the power window switches the auto reverse function unexpectedly during autowill remain active for 45 seconds after the ignition switch closure. If this happens, pull the switch lightly to the is turned to the LOCK position. Opening either front first detent and hold to close window manually. door will cancel this feature.
For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time is programmable. Refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features) in Understanding Your Instrument Panel for further information.
WARNING!
There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Reset It may be necessary at some point in time to reactivate the Auto Up feature. To do so, perform the following procedure: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.
2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window Lockout Button The window lockout button on the drivers door trim panel allows you to disable the window control on the rear doors. To disable the window control on the other doors, press and release the window LOCKOUT button (setting it in the down position). To enable the window controls, press and release the window LOCKOUT button again (setting it in the up position).
Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof or Sky Slider (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof or Sky Slider open, adjust the sunroof or Sky Slider opening to minimize the buffeting or open any window.
Window Lockout Button
NOTE: Use the power door LOCK switch on either front LIFTGATE To open the liftgate, pull up (squeeze) on the handle and door trim panel or the Remote Keyless Entry (RKE) lift. transmitter to lock and unlock the liftgate. The manual door locks on the doors and the drivers door lock cylinder will not lock and unlock the liftgate.
WARNING!
Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on the window switch located on the liftgate.
Liftgate Release
WARNING!
To avoid injury, stand back when opening. Glass may automatically rise. NOTE: If a malfunction to the liftgate latch should occur, an emergency liftgate latch release can be used to open the liftgate. The emergency liftgate latch release can be accessed through a snap-in cover located on the liftgate trim panel.
WARNING!
Liftgate Flipper Glass Release
NOTE: To prevent accidental damage the Liftgate Flipper Glass will not open if the liftgate is ajar. Make sure the liftgate is fully closed when attempting to open the Flipper Glass.
Driving with the flipper glass open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the flipper glass closed when you are operating the vehicle.
OCCUPANT RESTRAINTS Front seat belts incorporate pretensioners that may Some of the most important safety features in your enhance occupant protection by managing occupant vehicle are the restraint systems: energy during an impact event Three-point lap and shoulder belts for all seating All seat belt systems (except the drivers and rear positions center) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by Advanced Front Air Bags for driver and front passenextending the belt all the way out and then adjusting ger the belt to the desired length to restrain a child seat or Supplemental Active Head Restraints (AHR) located secure a large item in a seat if equipped on top of the front seats (integrated into the head Please pay close attention to the information in this section. restraint) It tells you how to use your restraint system properly, to Supplemental Side Air Bag Inflatable Curtains keep you and your passengers as safe as possible. (SABIC) for the driver and passengers seated next to a If you will be carrying children too small for adult-sized window seat belts, the seat belts or the Lower Anchors and Tether An energy-absorbing steering column and steering for CHildren (LATCH) feature also can be used to hold wheel infant and child restraint systems. For more information on LATCH, refer to Lower Anchors and Tether for Knee bolsters/blockers for front seat occupants CHildren (LATCH).
NOTE: The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on the severity and type of collision.
secured in the rear seat in child restraints or beltpositioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under Here are some simple steps you can take to minimize the their arm. risk of harm from a deploying air bag: If a child from 1 to 12 years old (not in a rear facing child 1. Children 12 years old and under should always ride seat) must ride in the front passenger seat, move the seat buckled up in a rear seat. as far back as possible and use the proper child restraint. (Refer to Child Restraints)
WARNING!
3. The driver and front passenger seats should be moved back as far as practical to allow the Advanced Children that are not big enough to wear the vehicle seat Front Air Bags room to inflate. belt properly (see section on Child Restraints) should be
Infants in rear facing child restraints should never ride in the front seat of a vehicle with a passenger Advanced Front Air Bag. An air bag deployment can cause severe injury or death to infants in that position.
You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should always wear their lap and shoulder belts properly.
4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under If You Need Assistance.
WARNING! (Continued)
Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air Bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. Supplemental Side Air Bag Inflatable Curtain (SABIC) also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly.
WARNING!
Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags wont deploy at all. Always wear your seat belts even though you have air bags. (Continued)
Buckle up even though you are an excellent driver, even collision, the belt will lock and reduce your risk of on short trips. Someone on the road may be a poor driver striking the inside of the vehicle or being thrown out. and cause a collision that includes you. This can happen WARNING! far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or accidents. This feature allows the shoulder part of the belt to move freely with you under normal conditions. However, in a It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly. Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. (Continued)
Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is located on the B-Pillar along the outboard side and rear of the seat cushion. The rear
seat belt latch plates are located on the C-Pillar for the outboard rear seating positions and next to your arm in the center rear seating position. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
Latch Plate
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a click.
WARNING!
A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. (Continued)
Latch Plate To Buckle
A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs arent as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together.
tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
WARNING!
A lap belt worn too high can increase the risk of injury in a collision. The belt forces wont be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap part of your seat belt as low as possible and keep it snug. A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight. If you cant straighten a belt in your vehicle, take it to your authorized dealer immediately and have it fixed.
4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up 5. Position the shoulder belt on your chest so that it is a bit on the shoulder belt. To loosen the lap belt if it is too comfortable and not resting on your neck. The retractor will withdraw any slack in the belt.
WARNING!
A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.). Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can be 6. To release the belt, push the red button on the buckle. adjusted upward or downward to position the belt away The belt will automatically retract to its stowed position. from your neck. Press the release button to release the If necessary, slide the latch plate down the webbing to anchorage, and then move it up or down to the position allow the belt to retract fully. that fits you best.
Removing Slack From Belt
NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows
the shoulder belt anchorage to be adjusted in the upward position without pressing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate.
Adjusting Upper Shoulder Belt
4. Continue to slide the latch plate up until it clears the folded webbing.
Seat Belt Lock Out ALR Automatic Locking Retractor The center rear seat belt system has a lock out feature that If the passenger seating position is equipped with an will not allow you to extract the center webbing unless ALR and is being used for normal usage: the rear seat upper latch is engaged. Only pull the belt webbing out far enough to comfortably Seat Belts In Passenger Seating Positions wrap around the occupants mid-section so as to not The seat belts in the passenger seating positions are activate the ALR. If the ALR is activated, you will hear a equipped with Automatic Locking Retractors (ALR) ratcheting sound as the belt retracts. Allow the webbing which are used to secure a child restraint system. For to retract completely in this case and then carefully pull additional information, refer to Installing Child Reout only the amount of webbing necessary to comfortstraints Using The Vehicle Seat Belt under the Child ably wrap around the occupants mid-section. Slide the Restraints section. The chart below defines the type of latch plate into the buckle until you hear a click. feature for each seating position. Automatic Locking Retractor Mode (ALR) If Driver Center Passenger Equipped First Row N/A N/A ALR In this mode, the shoulder belt is automatically preSecond Row ALR Cinching ALR locked. The belt will still retract to remove any slack in Latch Plate the shoulder belt. The Automatic Locking Mode is availThird Row N/A N/A N/A able on all passenger-seating positions with a combina N/A Not Applicable tion lap/shoulder belt. Use the Automatic Locking Mode
anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in the rear seat. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
WARNING!
The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
3. Allow the belt to retract. As the belt retracts, you will Energy Management Feature hear a clicking sound. This indicates the safety belt is This vehicle has a safety belt system with an energy now in the Automatic Locking Mode. management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on How To Disengage The Automatic Locking Mode Unbuckle the combination lap/shoulder belt and allow it collision. to retract completely to disengage the Automatic Locking This safety belt system has a retractor assembly that is Mode and activate the vehicle sensitive (emergency) designed to release webbing in a controlled manner. This locking mode. feature is designed to help reduce the belt force acting on the occupants chest.
WARNING!
The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. Failure to replace the belt and retractor assembly could increase the risk of injury in accidents. Seat Belt Pretensioner The belt for driver seating position is equipped with a retractor pretensioning device, the belt for passenger seating position is equipped with both retractor and buckle pretensioning devices. These devices are designed to remove any slack from the seat belt systems in the event of a collision. These devices may improve the performance of the seat belt by assuring that the belt is
tight around the occupant early in a collision. Pretensioners work for all size occupants, including those in child restraints. NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt must still be worn snugly and positioned properly. The pretensioners are triggered by the Occupant Restraint Controller (ORC). Like the air bags, the pretensioners are single use items. A deployed pretensioner or a deployed air bag must be replaced immediately. Supplemental Active Head Restraints (AHR) These head restraints are passive, deployable components, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspection of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic.
How The Active Head Restraints (AHR) Work The Occupant Restraint Controller (ORC) determines whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupants head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact. However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on the severity and type of the impact.
Active Head Restraint (AHR) Components

1 Head Restraint Front Half (Soft Foam and Trim) 2 Seatback 3 Head Restraint Back Half (Decorative Plastic Rear Cover) 4 Head Restraint Guide Tubes
CAUTION!
All occupants, including the driver, should not operate a vehicle or sit in a vehicles seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on properly adjusting and positioning the head restraint, refer to Adjusting Active Head Restraints in Understanding The Features Of Your Vehicle.
1. Grasp the deployed AHR from the rear seat.
Resetting Active Head Restraints (AHR) Hand Positioning Points On AHR If the Active Head Restraints are triggered in a collision, you must reset the head restraint on the drivers and 2. Position the hands on the top of the deployed AHR at front passenger seat. You can recognize when the Active a comfortable position. Head Restraint has been triggered by the fact that they have moved forward (as shown in step three of the resetting procedure).
3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism.
3 Final Downward Movement To Engage Locking Mechanism 1 Downward Movement 2 Rearward Movement
4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
Enhanced Seat Belt Use Reminder System (BeltAlert) BeltAlert is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened. The BeltAlert warning sequence begins after the vehicle speed is over 5 mph (8 km/h), by blinking the Seat Belt Reminder Light and sounding an intermittent chime. AHR In Reset Position Once the sequence starts, it will continue for the entire NOTE: duration or until the respective seatbelts are fastened. If you have difficulties or problems resetting the After the sequence completes, the Seat Belt Reminder Active Head Restraints, see an authorized dealer. Light remains illuminated until the respective seat belts For safety reasons, have the Active Head Restraints are fastened. The driver should instruct all other occuchecked by a qualified specialist at an authorized pants to fasten their seat belts. If a front seat belt is dealer.
unbuckled while traveling at speeds greater than 5 mph Seat Belts And Pregnant Women (8 km/h), BeltAlert will provide both audio and visual We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is notification. the best way to keep the baby safe. The front passenger seat BeltAlert is not active when the front passenger seat is unoccupied. BeltAlert may be Pregnant women should wear the lap part of the belt triggered when an animal or heavy object is on the front across the thighs and as snug across the hips as possible. passenger seat or when the seat is folded flat (if Keep the belt low so that it does not come across the equipped). It is recommended that pets be restrained in abdomen. That way the strong bones of the hips will take the rear seat in pet harnesses or pet carriers that are the force if there is a collision. secured by seat belts, and cargo is properly stowed. Seat Belt Extender BeltAlert can be enabled or disabled by your authorized If a seat belt is too short, even when fully extended, and dealer. Chrysler Group LLC does not recommend deac- when the adjustable upper shoulder belt anchorage (if so equipped) is in its lowest position, your authorized tivating BeltAlert. dealer can provide you with a seat belt extender. This NOTE: Although BeltAlert has been deactivated, the extender should be used only if the existing belt is not Seat Belt Reminder Light will continue to illuminate long enough. When it is not required, remove the exwhile the drivers or front passenger (if equipped with tender, and store it. BeltAlert) seat belt remains unfastened.
WARNING!
Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Supplemental Restraint System (SRS) Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat Advanced Front Air Bag And Knee Bolster Locations belt restraint systems. The drivers Advanced Front Air Bag is mounted in the steering wheel. The passengers 1 Driver And Passenger Advanced Front Air Bags Advanced Front Air Bag is mounted in the instrument 2 Knee Bolster panel, above the glove compartment. The words SRS/ The Advanced Front Air Bags have a multistage inflator AIRBAG are embossed on the air bag covers. design. This allows the air bag to have different rates of NOTE: These air bags are certified to the new Federal inflation that are based on the severity and type of collision. regulations for Advanced Air Bags.
This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Air Bags based upon seat position. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is fastened. The seat belt buckle switch may adjust the inflation rate of the Advanced Front Air Bags. This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) that run the entire length of the headliner to protect the driver and passengers in the first and second row sitting next to a window.
Supplemental Side Air Bag Inflatable Curtains (SABIC) Label Location
NOTE: Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. After any accident, the vehicle should be taken to an authorized dealer immediately.
Air Bag System Components Supplemental Active Head Restraint for Driver and Your vehicle may be equipped with the following air bag Front Passenger system components: Occupant Classification System (OCS) Occupant Restraint Controller (ORC) Occupant Classification Module (OCM) Air Bag Warning Light Passenger Air Bag Disable (PAD) Indicator Light Steering Wheel and Column Weight Sensors Instrument Panel Advanced Front Air Bag Features Knee Impact Bolster The Advanced Front Air Bag system has multistage driver and front passenger air bags. This system provides output Driver Advanced Front Air Bag appropriate to the severity and type of collision as deter Passenger Advanced Front Air Bag mined by the Occupant Restraint Controller (ORC), which may receive information from the front impact sensors. Supplemental Side Air Bag Inflatable Curtains (SABIC) The first stage inflator is triggered immediately during an impact that requires air bag deployment. This low output Front and Side Impact Sensors is used in less severe collisions. A higher energy output is Front Seat Belt Pretensioners, Seat Belt Buckle Switch, used for more severe collisions. and Seat Track Position Sensors
NOTE: The passenger Advanced Front Air Bag may not deploy, even when the driver Advanced Front Air Bag has, if the Occupant Classification System (refer to Occupant Classification System) has determined the passenger seat is empty or is occupied by someone that is classified in the child size category. This could be a child, teenager, or even an adult.
Do not put anything on or around the air bag covers or attempt to manually open them. You may damage the air bags and you could be injured because the air bags may no longer be functional. These protective covers for the air bag cushions are designed to open only when the air bags are inflating. Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. Do not drill, cut or tamper with the knee bolster in any way. Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc. (Continued)
WARNING!
No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. (Continued)
Do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for installation on the vehicle roof. Do not drill into the roof of the vehicle for any reason.
NOTE: Should a vehicle rollover occur, the pretensioners and/or SABIC air bags on both sides of the vehicle may deploy. Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. Being too close to the side air bags during deployment could cause you to be severely injured or killed.
Supplemental Side Air Bag Inflatable Curtain The system includes side impact sensors that are cali(SABIC) SABIC air bags may offer side-impact and vehicle roll- brated to deploy the side air bags during impacts that over protection to front and rear seat outboard occupants require side air bag occupant protection. in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side-impact head injuries. The SABIC air bags deploy downward, covering both windows on the impact side.
WARNING!
If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions. Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury.
If your vehicle is equipped with SABIC air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for installation on the vehicle roof. Do not drill into the roof of the vehicle for any reason. Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position front occupants for the best interaction with the Advanced Front Air Bag.
Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls
Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision. Advanced Front Air Bags are not expected to reduce the risk of injury in rear, side, or rollover collisions.
The Advanced Front Air Bags will not deploy in all Occupant Restraint Controller (ORC) frontal collisions, including some that may produce subThe ORC is part of a Federally regulated safety system stantial vehicle damage for example, some pole collirequired for this vehicle. sions, truck underrides, and angle offset collisions. On The ORC determines if deployment of the front and/or the other hand, depending on the type and location of side air bags in a frontal or side collision is required. impact, Advanced Front Air Bags may deploy in crashes Based on the impact sensors signals, a central electronic with little vehicle front-end damage but that produce a ORC deploys the Advanced Front Air Bags, Supplemen- severe initial deceleration. tal Side Air Bag Inflatable Curtain (SABIC), and front seat The SABIC will not deploy in all side collisions. SABIC belt pretensioners, as required, depending on the severity deployment will depend on the severity and type of and type of impact. collision.
Also, the ORC turns on the Air Bag Warning Light for four to eight seconds for a self-check when the ignition is first turned to ON/RUN. After the self-check, the Air Bag Warning Light will turn off. If the ORC detects a malfunction in Seat belts are necessary for your protection in all crashes, any part of the system, it turns on the Air Bag Warning and also are needed to help keep you in position, away Light either momentarily or continuously. A single from an inflating air bag. chime will sound if the light comes on again after initial The ORC also monitors the readiness of the electronic startup. parts of the air bag system whenever the ignition switch It also includes diagnostics that will illuminate the instruis in the START or ON/RUN positions. If the key is in the ment cluster Air Bag Warning Light if a malfunction is LOCK position, in the ACC position, or not in the noted that could affect the air bag system. The diagnosignition, the air bag system is not on and the air bags will tics also record the nature of the malfunction. not inflate. Because air bag sensors measure vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an air bag should have deployed. The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment.
WARNING!
Ignoring the Air Bag Warning Light in your instrument panel could mean you wont have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
Occupant Classification Module (OCM) The OCM is located beneath the front passenger seat. The OCM classifies the occupant into categories based on the measurements made by the seat weight sensors. The OCM communicates with the ORC. The ORC uses the occupant category to determine whether the passenger Advanced Front Air Bag should be turned off. It also determines the rate of air bag inflation during a collision.
Weight Sensors Your vehicle has four Weight Sensors located between the Occupant Classification System (OCS) seat and the floor pan. The weight sensors measure The OCS is part of a Federally regulated safety system applied weight and transfers that information to the required for this vehicle. It is designed to turn off the OCM. passenger Advanced Front Air Bag for an empty seat and for occupants classified in a category other than an adult. Passenger Air Bag Disable (PAD) Indicator Light The PAD Indicator Light (an amber light located in the This could be a child, teenager, or even an adult. center of the instrument panel) tells the driver and front NOTE: Children 12 years or younger should always passenger when the passenger Advanced Front Air Bag is ride buckled up in a rear seat in an appropriate child turned off. The PAD Indicator light illuminates the words restraint.
PASS AIR BAG OFF to show that the passenger Advanced Front Air Bag will not inflate during a collision requiring air bag deployment. When the right front passenger seat is empty or when very light objects are placed on the seat, the passenger air bag will not inflate even though the PAD indicator light is not illuminated.
The PAD indicator light should not be illuminated when an adult passenger is properly seated in the front passenger seat. In this case, the passenger Advanced Front Air Bag is ready to be inflated if a collision requires an air bag deployment. For all other occupants, the PAD indicator light will be illuminated indicating that the passenger Advanced Front Air Bag is turned off and will not inflate. NOTE: Even though this vehicle is equipped with an occupant classification system, children 12 years or younger should always ride buckled up in a rear seat in an appropriate child restraint (refer to Child Restraints).
Indicator Light Location
WARNING!
Never place a rear facing infant seat in front of an air bag. A deploying passenger Advanced Front Air Bag can cause death or serious injury to a child in a rear-facing infant seat. Passenger Air Bag Disable (PAD) System Front Passenger Indicator Light Air Bag Status Adult OFF ON Child ON OFF Grocery Bags, Heavy Briefcases ON OFF and Other Relatively Light Objects Empty or Very OFF* OFF Light Objects * Since the system senses weight, some small objects will turn the PAD Indicator Light on.
Drivers and adult passengers should verify that the PAD Indicator Light is not illuminated when an adult is riding in the front passenger seat. If an adult occupants weight is transferred to another part of the vehicle (like the door or instrument panel), the weight sensors in the seat may not properly classify the occupant. Objects lodged under the seat or between the seat and the center console can prevent the occupants weight from being measured properly and may result in the occupant being improperly classified. Ensure that the front passenger seatback does not touch anything placed on the second row of seats because this can also affect occupant classification. Also, if you fold down the seats in the second row check to be sure they dont touch the front passenger seat. If the front passenger seat is damaged in any way, it should only be serviced by an authorized dealer. If the seat is removed (or even if the seat attachment bolts are loosened or tightened in any way), take the vehicle to an authorized dealer.
If there is a fault present in the air bag system, the Air Bag Warning Light (a red light located in the center of the instrument cluster directly in front of the driver) will be turned on. This indicates that you should have an authorized dealer service the system immediately. The Air Bag Warning Light is turned on whenever there is a fault that can affect the operation of the air bag system. If there is a fault present in the PAD Indicator Light, the Air Bag Warning Light will be illuminated to show that the passenger Advanced Front Air Bag may be turned off until the fault is cleared. If the Air Bag Warning Light is illuminated, have an authorized dealer service the air bag system immediately. If an object is lodged under the seat and interferes with operation of the weight sensors, a fault will occur which turns on both the PAD Indicator Light and the Air Bag Warning Light. Once the lodged object is removed, the fault will be automatically cleared after a short period of time.
Driver And Passenger Advanced Front Air Bag Inflator Units The Driver And Passenger Advanced Front Air Bag Inflator Units are located in the center of the steering wheel and on the right side of the instrument panel. When the ORC detects a collision requiring the Advanced Front Air Bags, it signals the inflator units. A large quantity of non-toxic gas is generated to inflate the Advanced Front Air Bags. Different air bag inflation rates are possible based on collision severity and type. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The air bags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The air bags then quickly deflate while helping to restrain the driver and front passenger.
The Advanced Front Air Bag gas is vented through the and damage by themselves are not good indicators of vent holes in the sides of the air bag. In this way, the air whether or not an air bag should have deployed. bags do not interfere with your control of the vehicle. A quantity of non-toxic gas is generated to inflate the Along with seat belts and pretensioners, Advanced Front SABIC. The inflating SABIC pushes the outside edge of Air Bags work with the knee bolsters to provide im- the headliner out of the way and covers the window. The proved protection for the driver and front passenger. Side air bag inflates in about 30 milliseconds (about one air bags also work with seat belts to improve occupant quarter of the time it takes to blink your eyes) with enough force to injure you if you are not belted and protection. seated properly, or if items are positioned in the area Supplemental Side Air Bag Inflatable Curtains where the SABIC inflates. This especially applies to (SABIC) Inflator Units children. The SABIC is only about 312 inches (9 cm) thick The Supplemental Side Air Bag Inflatable Curtains when it is inflated. (SABIC) may deploy during rollovers and collisions where the impact is confined to a particular area of the The system includes side impact sensors that are caliside of the vehicle, depending on the severity and type of brated to deploy the side air bags during impacts that collision. In these events, the ORC will deploy the SABIC require air bag occupant protection. only on the impact side of the vehicle. Because air bag sensors estimate deceleration over time, vehicle speed
WARNING!
If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtains (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
The following requirements must be strictly adhered to: Do not modify the front passenger seat assembly or components in any way. Do not use prior or future model year seat covers not designated for the specific model being repaired. Always use the correct seat cover specified for the vehicle.
Do not replace the seat cover with an aftermarket seat The front passenger seat assembly contains critical comcover. ponents that affect the front passenger air bag deployment. Correctly functioning front passenger seat compo- Do not add a secondary seat cover other than those approved by Chrysler Group LLC/Mopar. nents are critical for the Occupant Classification System (OCS) to properly classify the front passenger and calcu At no time should any Supplemental Restraint System late the proper air bag deployment. Do not make any (SRS) component or SRS related component or fasmodifications to the front passenger seat components, tener be modified or replaced with any part except assembly, or to the seat cover. those which are approved by Chrysler Group LLC/Mopar.
WARNING!
Unapproved modifications or service procedures to the front passenger seat assembly, its related components or seat cover may inadvertently change the air bag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in a collision. A modified vehicle may not comply with required Federal Motor Vehicle Safety Standards (FMVSS) and/or Canadian Motor Vehicle Safety Standards (CMVSS).
Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: Cut off fuel to the engine. Flash hazard lights as long as the battery has power or until the ignition key is turned off. Turn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed.
Front And Side Impact Sensors In front and side impacts, impact sensors can aid the ORC in determining appropriate response to impact Unlock the doors automatically. events. In order to reset the Enhanced Accident Response System functions after an event, the ignition switch must be changed from IGN ON to IGN OFF.
If A Deployment Occurs The Advanced Front Air Bags are designed to deflate immediately after deployment.
NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with As the air bags deflate you may see some smoke-like particles. The particles are a normal by-product of the the air bag system. process that generates the non-toxic gas used for air If you do have a collision which deploys the air bags, any bag inflation. These airborne particles may irritate the or all of the following may occur: skin, eyes, nose, or throat. If you have skin or eye The nylon air bag material may sometimes cause irritation, rinse the area with cool water. For nose or abrasions and/or skin reddening to the driver and throat irritation, move to fresh air. If the irritation front passenger as the air bags deploy and unfold. The continues, see your doctor. If these particles settle on abrasions are similar to friction rope burns or those your clothing, follow the garment manufacturers inyou might get sliding along a carpet or gymnasium structions for cleaning. floor. They are not caused by contact with chemicals.
They are not permanent and normally heal quickly. However, if you havent healed significantly within a few days, or if you have any blistering, see your doctor immediately.
Do not drive your vehicle after the air bags have de- Maintaining Your Air Bag System ployed. If you are involved in another collision, the air WARNING! bags will not be in place to protect you.
WARNING!
Deployed air bags cannot protect you in another collision. Have the air bags, and seat belt retractor assembly replaced by an authorized dealer immediately. Also, have the Occupant Classification System serviced as well.
Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel. Do not modify the front bumper or vehicle body structure or add aftermarket side steps or running boards. (Continued)
Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer. Only manufacturer approved seat accessories may be used. If it is necessary to modify the air bag system for persons with disabilities, contact your authorized dealer. It is dangerous to try to repair any part of the air bag system yourself. Be sure to tell anyone who works on your vehicle that it has an air bag system.
Air Bag Warning Light You will want to have the air bags ready to inflate for your protection in a collision. The Air Bag Warning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the air bag system immediately. The Air Bag Warning Light does not come on during the four to eight seconds when the ignition switch is first turned to the ON/RUN position. The Air Bag Warning Light remains on after the four to eight-second interval. The Air Bag Warning Light comes on intermittently or remains on while driving.
NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good. Event Data Recorder (EDR) This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicles systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: How various systems in your vehicle were operating;
Whether or not the driver and passenger safety belts were buckled/fastened; How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.
WARNING!
In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the childs size.
Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the There are different sizes and types of restraints for law, and you can be prosecuted for ignoring it. children from newborn size to the child almost large Children 12 years or younger should ride properly enough for an adult safety belt. Always check the child buckled up in a rear seat, if available. According to crash seat Owners Manual to ensure you have the right seat statistics, children are safer when properly restrained in for your child. Use the restraint that is correct for your the rear seats rather than in the front. child.
held in the vehicle by the lap/shoulder belt or the Infants And Child Restraints Safety experts recommend that children ride rearward- LATCH child restraint anchor system. Refer to Lower facing in the vehicle until they are two years old or until Anchors and Tether for CHildren (LATCH). they reach either the height or weight limit of their rear WARNING! facing child safety seat. Two types of child restraints can be used rearward-facing: infant carriers and convertible Rearward-facing child seats must never be used in child seats. the front seat of a vehicle with the front passenger air The infant carrier is only used rearward-facing in the bag unless the air bag is turned off. An air bag vehicle. It is recommended for children from birth until deployment could cause severe injury or death to they reach the weight or height limit of the infant carrier. infants in this position. Convertible child seats can be used either rearwardfacing or forward-facing in the vehicle. Convertible child Older Children And Child Restraints seats often have a higher weight limit in the rearward- Children who are two years old or who have outgrown facing direction than infant carriers do, so they can be their rear-facing convertible child seat can ride forwardused rearward-facing by children who have outgrown facing in the vehicle. Forward-facing child seats and their infant carrier but are still less than at least two years convertible child seats used in the forward-facing direcold. Children should remain rearward-facing until they tion are for children who are over two years old or who reach the highest weight or height allowed by their have outgrown the rear-facing weight or height limit of convertible child seat. Both types of child restraints are their rear-facing convertible child seat. Children should
remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to Lower Anchors and Tether for CHildren (LATCH).
over the front of the seat when their back is against the seat back, should use the lap/shoulder belt in a rear seat. Make sure that the child is upright in the seat. The lap portion of the seat belt should be low on the hips and as snug as possible.
All children whose weight or height is above the Check belt fit periodically. A childs squirming or slouching can move the belt out of position. forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicles seat belts If the shoulder belt contacts the face or neck, move the fit properly. If the child cannot sit with knees bent over child closer to the center of the vehicle. Never allow a the vehicles seat cushion while the childs back is against child to put the shoulder belt under an arm or behind the seatback, they should use a belt-positioning booster their back. seat. The child and belt-positioning booster seat are held NOTE: For additional information, refer to in the vehicle by the lap/shoulder belt. www.seatcheck.org or call 1866SEATCHECK. CanaChildren Too Large For Booster Seats dian residents should refer to Transport Canadas webChildren who are large enough to wear the shoulder belt site for additional information: http://www.tc.gc.ca/ comfortably, and whose legs are long enough to bend roadsafety/safedrivers/childsafety/index.htm
WARNING!
Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturers directions exactly when installing an infant or child restraint. A rearward- facing infant restraint should only be used in a rear seat. A rearward-facing infant restraint in the front seat may be struck by a deploying passenger air bag, which may cause severe or fatal injury to the infant.
Here are some tips on getting the most out of your child restraint: Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. Chrysler Group LLC also recommends that you try a child restraint in the vehicle seats where you will use it before you buy it. The restraint must be appropriate for your childs weight and height. Check the label on the restraint for weight and height limits. Carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work when you need it. Buckle the child into the restraint exactly as the manufacturers instructions tell you.
WARNING!
When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Do not leave it loose in the vehicle. In a sudden stop or accident, it could strike the occupants or seatbacks and cause serious personal injury. Lower Anchors and Tether for CHildren (LATCH) Your vehicles rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicles seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure. LATCH-compatible child restraint systems are now available. However, because the lower anchorages are to be introduced over a period of years, child restraint systems having attachments for those anchorages will continue to
have features for installation using the vehicles seat belts. Child restraints having tether straps and hooks for connection to the top tether anchorages have been available for some time. For some older child restraints, many child restraint manufacturers offer add-on tether strap kits or retrofit kits. You are urged to take advantage of all the available attachments provided with your child restraint in any vehicle. All three rear seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats having flexible webbing mounted attachments. Child seats with fixed lower attachments must be installed in the outboard seating positions only. The center seating position will accommodate LATCHcompatible lower anchorages with flexible webbing mounted attachments only. Regardless of the specific type of lower attachment. Never install LATCHcompatible child seats such that two seats share a common lower anchorage.
If you are installing LATCH-compatible child restraints in adjacent rear seating positions, you can use the LATCH anchors or the vehicles seat belt for the outboard position, but you must use the vehicles seat belt at the center position. If your child restraints are not LATCHcompatible, you can only install the child restraints using the vehicles seat belts. Please refer to Installing The LATCH-Compatible Child Restraint System and Installing Child Restraints Using The Vehicle Seat Belt for typical installation instructions. Installing The LATCH-Compatible Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system.
The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seatback, and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
Latch Anchorages
In addition, there are tether strap anchorages behind each means of adjusting the tension in the strap. Forwardrear seating position located on the back of the seat. facing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. You will first loosen the child seat adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages. Next, attach the lower hooks or connectors over the top of the anchorage bars, pushing aside the seat cover material. Then, locate the tether anchorage directly behind the seat where you are placing the child restraint and attach the tether strap to the anchorage, being careful to route the tether strap to provide the most direct path Tether Strap Mounting between the anchor and the child restraint. For the Many, but not all, restraint systems will be equipped with outboard seating positions, route the tether underneath separate straps on each side, with each having a hook or the head restraint and attach the hook to the tether connector for attachment to the lower anchorage and a anchor located on the back of the seat. Finally, tighten all three straps as you push the child restraint rearward and
downward into the seat, removing slack in the straps will make a ratcheting noise if you extract the entire belt according to the child restraint manufacturers instruc- from the retractor and then allow the belt to retract into tions. the retractor. For additional information on ALR, refer to Automatic Locking Mode description under Seat WARNING! Belts in Passenger Seating Positions section. The chart below defines the seating positions with an Automatic Improper installation of a child restraint to the Locking Retractor (ALR) or a cinching latch plate. LATCH anchorages can lead to failure of an infant or Driver Center Passenger child restraint. The child could be badly injured or First Row N/A N/A ALR killed. Follow the manufacturers directions exactly Second Row ALR Cinching ALR when installing an infant or child restraint. Latch Plate Installing Child Restraints Using The Vehicle Seat Third Row N/A N/A N/A Belts N/A Not Applicable The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor (ALR) or ALR Automatic Locking Retractor a cinching latch plate to secure a Child Restraint System To attach a child restraint tether strap: (CRS). These types of seat belts are designed to keep the lap portion of the seat belt tight around the child restraint 1. To install a child restraint with ALR, first, pull enough so that it is not necessary to use a locking clip. The ALR of the seat belt webbing from the retractor to route it
through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a click. Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. As the belt retracts, you will hear a ratcheting sound. This indicates the safety belt is now in the Automatic Locking mode.
2. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary.
In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path 2. Finally, pull on any excess webbing to tighten the lap opening on the restraint. Disconnect the latch plate portion around the child restraint. Any seat belt system from the buckle and twist the short buckle-end belt will loosen with time, so check the belt occasionally, and several times to shorten it. Insert the latch plate into pull it tight if necessary. the buckle with the release button facing out. Installing a Child Restraint with a Cinching Latch Plate: If the belt still cant be tightened, or if pulling and 1. To install a child restraint with a cinching latch plate, pushing on the restraint loosens the belt, disconnect first, pull enough of the seat belt webbing from the the latch plate from the buckle, turn the buckle retractor to route it through the belt path of the child. around, and insert the latch plate into the buckle Slide the latch plate into the buckle until you hear a again. If you still cant make the child restraint secure, click. try a different seating position. To attach a child restraint tether strap
Route the tether strap to provide the most direct path for the strap between the anchor and the child seat, preferably between the head restraint posts underneath the head restraint.
WARNING!
An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Transporting Pets Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts.
Tether Strap Mounting
ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle.
CAUTION!
Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result.
Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or NOTE: A new engine may consume some oil during its 55 mph (80 or 90 km/h) are desirable. first few thousand miles (kilometers) of operation. This While cruising, brief full-throttle acceleration within the should be considered a normal part of the break-in and limits of local traffic laws contributes to a good break-in. not interpreted as an indication of difficulty. Wide-open throttle acceleration in low gear can be detriSAFETY TIPS mental and should be avoided. The engine oil installed in the engine at the factory is a Transporting Passengers high-quality energy conserving type lubricant. Oil NEVER TRANSPORT PASSENGERS IN THE CARGO changes should be consistent with anticipated climate AREA. conditions under which vehicle operations will occur. For the recommended viscosity and quality grades, refer to Maintenance Procedures in Maintaining Your Vehicle.
WARNING!
Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly.
Exhaust Gas
WARNING!
Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode. (Continued)
If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed.
Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
The best protection against carbon monoxide entry into Front seat belt assemblies must be replaced after a the vehicle body is a properly maintained engine exhaust collision. Rear seat belt assemblies must be replaced after system. a collision if they have been damaged (i.e., bent retractor, Whenever a change is noticed in the sound of the exhaust torn webbing, etc.). If there is any question regarding belt system, when exhaust fumes can be detected inside the or retractor condition, replace the belt. vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- Air Bag Warning Light plete exhaust system and adjacent body areas for broken, The light should come on and remain on for four to eight damaged, deteriorated, or mispositioned parts. Open seconds as a bulb check when the ignition switch is first seams or loose connections could permit exhaust fumes turned ON. If the light is not lit during starting, see your to seep into the passenger compartment. In addition, authorized dealer. If the light stays on, flickers, or comes inspect the exhaust system each time the vehicle is raised on while driving, have the system checked by an authorized dealer. for lubrication or oil change. Replace as required.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area unobstructed and that are firmly secured so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
Always make sure that floor mats are properly attached to the floor mat fasteners. Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals. Check mounting of mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning. (Continued)
WARNING!
Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. (Continued)
Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. If required, mounting posts must be properly installed, if not equipped from the factory. Failure to properly follow floor mat installation or mounting can cause interference with the brake pedal and accelerator pedal operation causing loss of control of the vehicle. Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects
lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure. Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CONTENTS
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Uconnect Phone If Equipped . . . . . . . . . . 103 Inside Day/Night Mirror . . . . . . . . . . . . . . . . 99 Automatic Dimming Mirror If Equipped . . 100 Outside Mirrors . . . . . . . . . . . . . . . . . . . . . 101 Power Mirrors . . . . . . . . . . . . . . . . . . . . . . 101 Heated Mirrors If Equipped . . . . . . . . . . . 102 Illuminated Vanity Mirrors If Equipped . . 102 Sun Visor Slide-On-Rod Feature If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Operation . . . . . . . . . . . . . . . . . . . . . . . . . 105 Phone Call Features . . . . . . . . . . . . . . . . . . 113 Uconnect Phone Features . . . . . . . . . . . . . 116 Advanced Phone Connectivity . . . . . . . . . . . 120 Things You Should Know About Your Uconnect Phone . . . . . . . . . . . . . . . . . . . . 122 General Information . . . . . . . . . . . . . . . . . . 133
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Voice Command If Equipped . . . . . . . . . . . 133 Voice Command System Operation . . . . . . . . 133 Commands . . . . . . . . . . . . . . . . . . . . . . . . 134 Voice Training . . . . . . . . . . . . . . . . . . . . . . 138 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Drivers Power Seat If Equipped . . . . . . . 139 Heated Seats If Equipped . . . . . . . . . . . . 140 Manual Front Seat Adjustments . . . . . . . . . . 142 Front Seat Manual Recline . . . . . . . . . . . . 143 Manual Lumbar Support If Equipped . . . . 144 Fold-Flat Front Passenger Seat If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Head Restraints . . . . . . . . . . . . . . . . . . . . . 145
60/40 Split Folding Rear Seat With Fold-Flat Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Driver Memory Seat If Equipped . . . . . . . . 151 Programming The Memory Feature . . . . . . . 152 Linking And Unlinking The Remote Keyless Entry Transmitter To Memory . . . . . . . . . . . 153 Memory Position Recall . . . . . . . . . . . . . . . . 154 Easy Entry/Exit Seat (Available With Memory Seat Only) . . . . . . . 155 To Open And Close The Hood . . . . . . . . . . . . 156 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Multifunction Lever . . . . . . . . . . . . . . . . . . 158 Headlights And Parking Lights . . . . . . . . . . 158 Automatic Headlights If Equipped . . . . . . 159
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
Headlights With Wipers (Available With Windshield Wipers And Washers . . . . . . Automatic Headlights Only) . . . . . . . . . . . . 160 Windshield Wiper Operation . . . . . . . . Headlight Time Delay If Equipped . . . . . . 160 Intermittent Wiper System . . . . . . . . . . Daytime Running Lights If Equipped . . . . 161 Windshield Washers . . . . . . . . . . . . . . Lights-On Reminder . . . . . . . . . . . . . . . . . . 161 Mist Feature . . . . . . . . . . . . . . . . . . . . Fog Lights If Equipped . . . . . . . . . . . . . . 161 Rain Sensing Wipers If Equipped . . . Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . 162 Headlights With Wipers (Available With High/Low Beam Switch . . . . . . . . . . . . . . . 162 Automatic Headlights Only) . . . . . . . .
. . . . 164 . . . . 165 . . . . 166 . . . . 167 . . . . 167 . . . . 168 . . . . 170
Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . 162 Tilt Steering Column . . . . . . . . . . . . . . . . . . . 171 Instrument Panel Dimmer . . . . . . . . . . . . . . 163 Tilt/Telescoping Steering Column . . . . . . . . . . 172 Map/Reading Lights . . . . . . . . . . . . . . . . . . 163 Electronic Speed Control If Equipped . . . . . 173 Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . 164 Battery Saver Feature . . . . . . . . . . . . . . . . . 164 To Activate . . . . . . . . . . . . . . . . . . . . . . . . . 173 To Set A Desired Speed . . . . . . . . . . . . . . . . 174
To Deactivate . . . . . . . . . . . . . . . . . . . . . . . 174 To Resume Speed . . . . . . . . . . . . . . . . . . . . 174 To Vary The Speed Setting . . . . . . . . . . . . . . 174 To Accelerate For Passing . . . . . . . . . . . . . . 175 Parksense Rear Park Assist If Equipped . . . 176 Parksense Sensors . . . . . . . . . . . . . . . . . . . 176 Parksense Warning Display . . . . . . . . . . . . 176 Parksense Display . . . . . . . . . . . . . . . . . . . 177 Enabling And Disabling Parksense . . . . . . . 180 Service The Parksense Rear Park Assist System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Cleaning The Parksense System . . . . . . . . . 181 Parksense System Usage Precautions . . . . . . 182
Garage Door Opener If Equipped . . . . . . . . 184 Before You Begin Programming HomeLink . . . . . . . . . . . . . . . . . . . . . . . . 186 Programming A Rolling Code . . . . . . . . . . . 186 Programming A Non-Rolling Code . . . . . . . . 188 Canadian/Gate Operator Programming . . . . 189 Using HomeLink . . . . . . . . . . . . . . . . . . . 191 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 Troubleshooting Tips . . . . . . . . . . . . . . . . . . 192 General Information . . . . . . . . . . . . . . . . . . 193 Power Sunroof If Equipped . . . . . . . . . . . . 193 Opening Sunroof Express . . . . . . . . . . . . 194 Opening Sunroof Manual Mode . . . . . . . . 194
Closing Sunroof Express . . . . . . . . . . . . . 194 Closing Sunroof Manual Mode . . . . . . . . 195 Pinch Protect Feature . . . . . . . . . . . . . . . . . 195 Pinch Protect Override . . . . . . . . . . . . . . . . 195 Venting Sunroof Express . . . . . . . . . . . . . 195
Opening The Sky Slider . . . . . . . . . . . . . . 199 Closing The Sky Slider . . . . . . . . . . . . . . . 200 Anti-Pinch Protect Feature . . . . . . . . . . . . . . 201 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . 201 Sky Slider Maintenance . . . . . . . . . . . . . . 201 . . . . . . . . . . . . . . . . . 202
Sunshade Operation . . . . . . . . . . . . . . . . . . 195 Electrical Power Outlet
Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . 196 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Sunroof Maintenance . . . . . . . . . . . . . . . . . 196 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Ignition Off Operation . . . . . . . . . . . . . . . . . 196 Sky Slider Full Length Open Roof If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Sky Slider Usage Precautions . . . . . . . . . . 197 Sky Slider Control . . . . . . . . . . . . . . . . . . 199 Glove Box Storage Compartment . . . . . . . . . 206 Front Storage Compartment . . . . . . . . . . . . . 206 Console Storage Compartment . . . . . . . . . . . 207 Cargo Area Features . . . . . . . . . . . . . . . . . . . 208 Cargo Load Floor . . . . . . . . . . . . . . . . . . . . 208
Rear Window Features . . . . . . . . . . . . . . . . . . 214 Rear Window Wiper/Washer . . . . . . . . . . . . 214
Rear Window Defroster . . . . . . . . . . . . . . . . 215 Roof Luggage Rack If Equipped . . . . . . . . . 216
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
Adjusting Rearview Mirror
Automatic Dimming Mirror If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse.
Automatic Dimming Mirror
CAUTION!
To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
Outside Mirrors Power Mirrors To receive maximum benefit, adjust the outside mirror(s) The power mirror switch is located on the drivers door to center on the adjacent lane of traffic and a slight trim panel. overlap of the view obtained from the inside mirror. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
WARNING!
Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
Power Mirror Switch

1 Mirror Direction Control 2 Left and Right Mirror Select
Models With Express Window Feature Press and release the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection will time out after 30 seconds of inactivity to guard against accidentally moving a mirror position following an adjustment.
Models Without Express Window Feature Press the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing.
Heated Mirrors If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear NOTE: For vehicles equipped with Driver Memory window defroster. Refer to Rear Window Features in Seat, you can use your Remote Keyless Entry (RKE) Understanding The Features of Your Vehicle for further transmitter or the memory switch on the instrument information. panel to return the power mirrors to pre-programmed Illuminated Vanity Mirrors If Equipped positions. Refer to Driver Memory Seat in UnderAn illuminated vanity mirror is on each sun visor. To use standing The Features Of Your Vehicle for further the mirror, rotate the sun visor down and swing the information. mirror cover upward. The lights will turn on automatically. Closing the mirror cover will turn off the light.
2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirror to extend it. Uconnect Phone IF EQUIPPED Uconnect Phone is a voice-activated, hands-free, invehicle communications system. Uconnect Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., Call Mike Work or Dial 248-555-1212). Your mobile phones audio is transmitted through your vehicles audio system; the system will automatically mute your radio when using the Uconnect Phone.
Illuminated Vanity Mirror
Sun Visor Slide-On-Rod Feature If Equipped The sun visor Slide-On-Rod feature allows for addi- NOTE: The Uconnect Phone requires a mobile phone tional flexibility in positioning the sun visor to block out equipped with the Bluetooth Hands-Free Profile, Version 0.96 or higher. See the Uconnect website for the sun. supported phones. 1. Fold down the sun visor.
For Uconnect customer support, visit the following mobile phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to websites: the vehicles Uconnect Phone. The Uconnect Phone www.chrysler.com/uconnect allows up to seven mobile phones to be linked to the system. Only one linked (or paired) mobile phone can be www.dodge.com/uconnect used with the system at a time. The system is available in www.jeep.com/uconnect English, Spanish, or French languages. or call 18778558400 Uconnect Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the systems microphone for private conversation. The Uconnect Phone is driven through your Bluetooth Hands-Free Profile mobile phone. Uconnect features Bluetooth technology - the global standard that enables different electronic devices to connect to each other without wires or a docking station, so Uconnect Phone works no matter where you stow your
WARNING!
Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadway ahead. Failure to do so may result in a collision causing serious injury or death.
Uconnect Phone Button The radio or steering wheel controls (if equipped) will contain the two control buttons button and Voice Com(Uconnect Phone button) that will enable you to mand access the system. When you press the button you will hear the word Uconnect followed by a BEEP. The beep is your signal to give a command.
The Uconnect Phone is fully integrated with the vehicles audio system. The volume of the Uconnect Phone can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. The radio display will be used for visual prompts from the Uconnect Phone such as CELL or caller ID on certain radios.
Voice Command Button Operation Actual button location may vary with the raVoice commands can be used to operate the Uconnect dio. The individual buttons are described in the Phone and to navigate through the Uconnect Phone Operation section. menu structure. Voice commands are required after most Uconnect Phone prompts. You will be prompted for a The Uconnect Phone can be used with any Hands-Free specific command and then guided through the available Profile certified Bluetooth mobile phone. See the options. Uconnect website for supported phones. Refer to your mobile service provider or the phone manufacturer for Prior to giving a voice command, one must wait for the beep, which follows the Ready prompt or andetails. other prompt.
For certain operations, compound commands can be used. For example, instead of saying Setup and then Pair a Device, the following compound command can be said: Pair a Bluetooth Device. For each feature explanation in this section, only the compound form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the compound form voice command Phonebook New Entry, or you can break the compound form command into two voice commands: Phonebook and New Entry. Please remember, the Uconnect Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to Voice Tree in this section.
Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say Help following the beep. The Uconnect Phone will play some of the options at any prompt if you ask for help. To activate the Uconnect Phone, simply press the button and follow the audible prompts for directions. Uconnect Phone sessions begin with a press of the button on the radio control head. Cancel Command At any prompt, after the beep, you can say Cancel and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. Pair (Link) Uconnect Phone To A Mobile Phone To begin using your Uconnect Phone, you must pair your compatible Bluetooth enabled mobile phone.
To complete the pairing process, you will need to refer- For identification purposes, you will be prompted to ence your mobile phone Owners Manual. The give the Uconnect Phone a name for your mobile Uconnect website may also provide detailed instrucphone. Each mobile phone that is paired should be tions for pairing. given a unique phone name. The following are general phone to Uconnect Phone You will then be asked to give your mobile phone a priority level between one and seven, with one being pairing instructions: the highest priority. You can pair up to seven mobile Press the button to begin. phones to your Uconnect Phone. However, at any After the Ready prompt and the following beep, say given time, only one mobile phone can be in use, Device Pairing. connected to your Uconnect System. The priority allows the Uconnect Phone to know which mobile When prompted, after the beep, say Pair a Device phone to use if multiple mobile phones are in the and follow the audible prompts. vehicle at the same time. For example, if priority three You will be asked to say a four-digit Personal Identiand priority five phones are present in the vehicle, the fication Number (PIN), which you will later need to Uconnect Phone will use the priority three mobile enter into your mobile phone. You can enter any phone when you make a call. You can select to use a four-digit PIN. You will not need to remember this PIN lower priority mobile phone at any time (refer to after the initial pairing process. Advanced Phone Connectivity in this section).
Dial By Saying A Number Press the button to begin. After the Ready prompt and the following beep, say Dial.
The system will prompt you to say the name of the person you want to call.
After the Ready prompt and the following beep, say the name of the person you want to call. For example, you can say John Doe, where John Doe is a previ The system will prompt you to say the number you ously stored name entry in the Uconnect phonebook want to call. or downloaded phonebook. To learn how to store a name in the phonebook, refer to Add Names to Your For example, you can say 234-567-8901. Uconnect Phonebook, in the phonebook. The Uconnect Phone will confirm the phone number The Uconnect system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios. may appear in the display of certain radios. Call By Saying A Name Add Names To Your Uconnect Phonebook button to begin. Press the NOTE: Adding names to the Uconnect Phonebook is After the Ready prompt and the following beep, say recommended when the vehicle is not in motion. Call. Press the button to begin.
After the Ready prompt and the following beep, say The Uconnect Phone will allow you to enter up to 32 names in the phonebook with each name having up to Phonebook New Entry. four associated phone numbers and designations. Each When prompted, say the name of the new entry. Use of language has a separate 32-name phonebook accessible long names helps the Voice Command and it is recomonly in that language. In addition, if equipped and mended. For example, say Robert Smith or Robert supported by your phone, Uconnect Phone automatiinstead of Bob. cally downloads your mobile phones phonebook. When prompted, enter the number designation (e.g., Phonebook Download Automatic Phonebook Home, Work, Mobile, or Other). This will Transfer From Mobile Phone allow you to store multiple numbers for each phoneIf equipped and specifically supported by your phone, book entry, if desired. Uconnect Phone automatically downloads names (text When prompted, recite the phone number for the names) and number entries from your mobile phones phonebook entry that you are adding. phonebook. Specific Bluetooth Phones with Phone Book Access Profile may support this feature. See Uconnect After you are finished adding an entry into the phonewebsite for supported phones. book, you will be given the opportunity to add more phone numbers to the current entry or to return to the To call a name from the Uconnect Phonebook or downloaded Phonebook, follow the procedure in main menu. Call by Saying a Name section.
Automatic download and update, if supported, begins This downloaded phonebook cannot be edited or as soon as the Bluetooth wireless phone connection is deleted on the Uconnect Phone. These can only be made to the Uconnect Phone, for example, after you edited on the mobile phone. The changes are transstart the vehicle. ferred and updated to Uconnect Phone on the next phone connection. A maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected Edit Uconnect Phonebook Entries to the Uconnect Phone. NOTE: Depending on the maximum number of entries down- Editing names in the phonebook is recommended loaded, there may be a short delay before the latest when the vehicle is not in motion. downloaded names can be used. Until then, if avail Automatic downloaded phonebook entries cannot be able, the previously downloaded phonebook is availdeleted or edited. able for use. Press the button to begin. Only the phonebook of the currently connected mobile After the Ready prompt and the following beep, say phone is accessible. Phonebook Edit Entry. Only the mobile phones phonebook is downloaded. SIM card phonebook is not part of the Mobile phone- You will then be asked for the name of the phonebook entry that you wish to edit. book.
Next, choose the number designation (home, work, mobile, or other) that you wish to edit. When prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu.
Press the
button to begin.
After the Ready prompt and the following beep, say Phonebook Delete. After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say List Names to hear a list of the entries in the phonebook from which you choose. To select one of the entries button while the from the list, press the Uconnect Phone is playing the desired entry and say Delete.
Phonebook Edit Entry can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add John Does work number later using the Phonebook Edit After you enter the name, the Uconnect Phone will ask you which designation you wish to delete: home, Entry feature. work, mobile, other, or all. Say the designation you Delete Uconnect Phonebook Entry wish to delete. NOTE: Editing phonebook entries is recommended when the vehicle is not in motion.
Note that only the phonebook entry in the current List All Names In The Uconnect Phonebook language is deleted. button to begin. Press the Automatic downloaded phonebook entries cannot be After the Ready prompt and the following beep, say deleted or edited. Phonebook List Names. Delete/Erase All Uconnect Phonebook Entries The Uconnect Phone will play the names of all the phonebook entries, including the downloaded phonebutton to begin. Press the book entries, if available. After the Ready prompt and the following beep, say To call one of the names in the list, press the Phonebook Erase All. button during the playing of the desired name, and The Uconnect Phone will ask you to verify that you say Call. wish to delete all the entries from the phonebook. NOTE: The user can also exercise Edit or Delete After confirmation, the phonebook entries will be operations at this point. deleted. The Uconnect Phone will then prompt you as to the Note that only the phonebook in the current language number designation you wish to call. is deleted. Automatic downloaded phonebook entries cannot be The selected number will be dialed. deleted or edited.
Phone Call Features The following features can be accessed through the Uconnect Phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect Phone. Check with your mobile service provider for the features that you have. Answer Or Reject An Incoming Call No Call Currently In Progress When you receive a call on your mobile phone, the Uconnect Phone will interrupt the vehicle audio system, if on, and will ask if you would like to answer the button to accept the call. To reject the call. Press the button until you hear a single call, press and hold the beep, indicating that the incoming call was rejected.
Answer Or Reject An Incoming Call Call Currently In Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your button to place the current mobile phone. Press the call on hold and answer the incoming call. NOTE: The Uconnect Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. Making A Second Call While Current Call Is In Progress To make a second call while you are currently on a call, press the button and say Dial or Call followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is
in progress. To go back to the first call, refer to Toggling Conference Call Between Calls in this section. To combine two calls, refer When two calls are in progress (one active and one on button until you hear a hold), press and hold the to Conference Call in this section. double beep indicating that the two calls have been Place/Retrieve A Call From Hold joined into one conference call. To put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To Three-Way Calling To initiate three-way calling, press the button while bring the call back from hold, press and hold the button until you hear a single beep. a call is in progress, and make a second phone call, as described under Making a Second Call While Current Toggling Between Calls Call is in Progress. After the second call has established, If two calls are in progress (one active and one on hold), button until you hear a double press and hold the button until you hear a single beep, press the beep, indicating that the two calls have been joined into indicating that the active and hold status of the two calls one conference call. have switched. Only one call can be placed on hold at a time.
Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press button until you hear a single beep. and hold the Redial Press the button to begin. After the Ready prompt and the following beep, say Redial.
Call Continuation Call continuation is the progression of a phone call on the Uconnect Phone after the vehicle ignition key has been switched to OFF. Call continuation functionality available on the vehicle can be any one of three types: After the ignition key is switched to OFF, a call can continue on the Uconnect Phone either until the call ends, or until the vehicle battery condition dictates cessation of the call on the Uconnect Phone and transfer of the call to the mobile phone.
After the ignition key is switched to OFF, a call can continue on the Uconnect Phone for a certain duration, after which the call is automatically transferred The Uconnect Phone will call the last number that from the Uconnect Phone to the mobile phone. was dialed from your mobile phone. An active call is automatically transferred to the NOTE: This may not be the last number dialed from the mobile phone after the ignition key is switched to OFF. Uconnect Phone.
Uconnect Phone Features
Language Selection To change the language that the Uconnect Phone is Pick up the phone and manually dial the emergency using: number for your area. Press the button to begin. If the phone is not reachable and the Uconnect Phone is After the Ready prompt and the following beep, say operational, you may reach the emergency number as the name of the language you wish to switch to follows: English, Espanol, or Francais. Press the button to begin. Continue to follow the system prompts to complete After the Ready prompt and the following beep, say the language selection. Emergency and the Uconnect Phone will instruct After selecting one of the languages, all prompts and the paired mobile phone to call the emergency numvoice commands will be in that language. ber. This feature is supported in the U.S., Canada, and Mexico. NOTE: After every Uconnect Phone language change operation, only the language-specific 32-name phoneNOTE: book is usable. The paired phone name is not language The emergency number dialed is based on the country specific and is usable across all languages. where the vehicle is purchased (911 for the U.S. and
Emergency Assistance If you are in an emergency and the mobile phone is reachable:
Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. Press the button to begin. If supported, this number may be programmable on After the Ready prompt and the following beep, say button and say some systems. To do this, press the Towing Assistance. Setup, followed by Emergency. NOTE: The Uconnect Phone does slightly lower your The towing assistance number dialed is based on the chances of successfully making a phone call as to that country where the vehicle is purchased (1-800-528for the mobile phone directly. 2069 for the U.S., 1-877-213-4525 for Canada, 55-143454 for Mexico City and 1-800-712-3040 for outside WARNING! Mexico City in Mexico). Please refer to the 24-Hour Towing Assistance coverage details on the DVD in To use your Uconnect Phone System in an emerthe Warranty Information Booklet and the 24-Hour gency, your mobile phone must be: Towing Assistance references. turned on, paired to the Uconnect System, If supported, this number may be programmable on and have network coverage. button and say some systems. To do this, press the Setup, followed by Towing Assistance.
When calling a number with your Uconnect Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word Send. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can Voice Mail Calling button and say, 3 7 4 6 # Send. Saying press the To learn how to access your voice mail, refer to Working a number, or sequence of numbers, followed by Send, with Automated Systems. is also to be used for navigating through an automated Working With Automated Systems customer service center menu structure, and to leave a This method is used in instances where one generally has number on a pager. to press numbers on the mobile phone keypad while You can also send stored Uconnect phonebook entries navigating through an automated telephone system. as tones for fast and easy access to voice mail and pager You can use your Uconnect Phone to access a voice entries. To use this feature, dial the number you wish to button and say, Send. The mail system or an automated service, such as a paging call and then press the service or automated customer service line. Some ser- system will prompt you to enter the name or number and vices require immediate response selection. In some say the name of the phonebook entry you wish to send. instances, that may be too quick for use of the Uconnect Phone. Paging To learn how to page, refer to Working with Automated Systems. Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the Uconnect Phone.
The Uconnect Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect tones over the phone. Phone will not repeat a phone number before you dial it). NOTE: You may not hear all of the tones due to mobile phone Press the button to begin. network configurations. This is normal. After the Ready prompt and the following beep, say one of the following: Some paging and voice mail systems have system time out settings that are too short and may not allow the Setup Confirmation Prompts On use of this feature. Setup Confirmation Prompts Off Barge In Overriding Prompts The Voice Command button can be used when you Phone And Network Status Indicators wish to skip part of a prompt and issue your voice If available on the radio and/or on a premium display command immediately. For example, if a prompt is such as the instrument panel cluster, and supported by asking Would you like to pair a phone, clear a..., you your mobile phone, the Uconnect Phone will provide button and say, Pair a Phone to notification to inform you of your phone and network could press the select that option without having to listen to the rest of status when you are attempting to make a phone call the voice prompt. using Uconnect Phone. The status is given for network signal strength, phone battery strength, etc.
Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth mobile phone, the audio will be played through your vehicles audio system. The Uconnect Phone will work the same as if you dial the number using Voice Command. NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
Mute/Un-Mute (Mute OFF) When you mute the Uconnect Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the Uconnect Phone: Press the button. Following the beep, say Mute. In order to un-mute the Uconnect Phone: Press the button. Following the beep, say Mute off. Advanced Phone Connectivity Transfer Call To And From Mobile Phone The Uconnect Phone allows ongoing calls to be transferred from your mobile phone to the Uconnect Phone without terminating the call. To transfer an ongoing call
from your Uconnect Phone paired mobile phone to the When prompted, say List Phones. button Uconnect Phone or vice versa, press the The Uconnect Phone will play the phone names of and say Transfer Call. all paired mobile phones in order from the highest to Connect Or Disconnect Link Between The the lowest priority. To Select or Delete a paired button and Uconnect Phone And Mobile Phone phone being announced, press the Your mobile phone can be paired with many different say Select or Delete. Also, see the next two secelectronic devices, but can only be actively connected tions for an alternate way to Select or Delete a with one electronic device at a time. paired phone. If you would like to connect or disconnect the Bluetooth Select Another Mobile Phone connection between your mobile phone and the This feature allows you to select and start using another Uconnect Phone System, follow the instructions de- phone paired with the Uconnect Phone. scribed in your mobile phone Users Manual. Press the button to begin. List Paired Mobile Phone Names After the Ready prompt and the following beep, say button to begin. Setup Select Phone and follow the prompts. Press the After the Ready prompt and the following beep, say You can also press the button at any time while the Setup Phone Pairing. list is being played, and then choose the phone that you wish to select.
The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete Uconnect Phone Paired Mobile Phones Press the button to begin.
Things You Should Know About Your Uconnect Phone Uconnect Phone Tutorial To hear a brief tutorial of the system features, press the button and say Uconnect Tutorial.
Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, the Uconnect After the Ready prompt and the following beep, say Phone Voice Training feature may be used. To enter this Setup Phone Pairing. training mode, follow one of the two following proce At the next prompt, say Delete and follow the dures: prompts. From outside the Uconnect Phone mode (e.g., from You can also press the button at any time while the radio mode): list is being played, and then choose the phone you Press and hold the button for five seconds until wish to delete. the session begins, or, Press the button and say the Voice Training, System Training, or Start Voice Training command.
You can either press the Uconnect Phone button to Voice Command restore the factory setting or repeat the words and For best performance, adjust the rearview mirror to phrases when prompted by the Uconnect Phone. For provide at least 12 in (1 cm) gap between the overhead best results, the Voice Training session should be comconsole (if equipped) and the mirror. pleted when the vehicle is parked with the engine running, all windows closed, and the blower fan Always wait for the beep before speaking. switched off. Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from This procedure may be repeated with a new user. The you. system will adapt to the last trained voice only. Reset press the button. After the Ready prompt, and the following beep, say Setup, then Reset. This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings. Make sure that no one other than you is speaking during a Voice Command period. Performance is maximized under: low-to-medium blower setting, low-to-medium vehicle speed, low road noise, smooth road surface,
fully closed windows, dry weather condition.
Numbers must be spoken in single digits. 800 must be spoken eight-zero-zero not eight hundred.
You can say O (letter O) for 0 (zero). Even though the system is designed for users speaking in North American English, French, and Spanish ac- Even though international dialing for most number combinations is supported, some shortcut dialing cents, the system may not always work for some. number combinations may not be supported. When navigating through an automated system such as voice mail, or when sending a page, at the end of In a convertible vehicle, system performance may be compromised with the convertible top down. speaking the digit string, make sure to say Send. Storing names in the phonebook when the vehicle is Far End Audio Performance not in motion is recommended. Audio quality is maximized under: It is not recommended to store similar sounding low-to-medium blower setting, names in the Uconnect Phonebook. low-to-medium vehicle speed, Phonebook (Downloaded and Uconnect Phone Lo low road noise, cal) name recognition rate is optimized when the entries are not similar. smooth road surface,
fully closed windows, dry weather conditions, and operation from the drivers seat.
SMS Uconnect Phone can read or send new messages on your phone.
Read Messages: Performance, such as audio clarity, echo, and loudness If you receive a new text message while your phone is to a large degree rely on the phone and network, and connected to Uconnect Phone, an announcement will not the Uconnect Phone. be made to notify you that you have a new text message. If you wish to hear the new message: Echo at the phone far end can sometimes be reduced Press the button. by lowering the in-vehicle audio volume. In a convertible vehicle, system performance may be After the Ready prompt and the following beep, say compromised with the convertible top down. SMS Read or Read Messages. Recent Calls Uconnect Phone will play the new text message for If your phone supports Automatic Phonebook Downyou. load, Uconnect Phone can list your Outgoing, IncomAfter reading a message, you can Reply or Forward ing and Missed Calls. the message using Uconnect Phone.
List of Preset Messages: Send Messages: You can send messages using Uconnect Phone. To send 1. Yes a new message: 2. No Press the button. 3. Where are you? After the Ready prompt and the following beep, say 4. I need more direction. SMS Send or Send Message. You can either say the message you wish to send or say 5. List Messages. There are 20 preset messages. 6. button while the To send a message, press the 7. system is listing the message and say Send. 8. Uconnect Phone will prompt you to say the name or number of the person you wish to send the message to. 9. LOL Why I love you Call me Call me later
10. Thanks 11. See You in 15 minutes 12. I am on my way
13. Ill be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me
After the Ready prompt and the following beep, say Setup, SMS Incoming Message Announcement, you will then be given a choice to change it. Bluetooth Communication Link Mobile phones have been found to lose connection to the Uconnect Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth ON mode.
Power-Up After switching the ignition key from OFF to either the ON or ACC position, or after a language change, you Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop must wait at least fifteen seconds prior to using the the system from announcing the new incoming mes- system. sages. Press the button.
Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all
Voice Commands Alternate(s)
Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial
pairing phone book
Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect Tutorial try again voice training work yes
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. VOICE COMMAND IF EQUIPPED Voice Command System Operation This Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, and a memo recorder.
NOTE: Take care to speak into the Voice Interface System as calmly and normally as possible. The ability of the Voice Interface System to recognize user voice commands may be negatively affected by rapid speaking or a raised voice level.
WARNING!
Any voice commanded system should be used only in safe driving conditions following local laws. All attention should be kept on the roadway ahead. Failure to do so may result in a collision causing serious injury or death. button, you When you press the Voice Command will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options.
If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as barging in. The system will be interrupted, and after the beep, you can add or change commands. This will become helpful once you start to learn the options. At any point, if the system does not recognize one of your commands, you will be prompted to repeat it. To hear the first available Menu, press the Voice Combutton and say Help or Main Menu. mand
Commands NOTE: At any time, you can say the words Cancel, The Voice Command system understands two types of Help or Main Menu. commands. Universal commands are available at all These commands are universal and can be used from any times. Local commands are available if the supported menu. All other commands can be used depending upon radio mode is active. the active application. Changing the Volume When using this system, you should speak clearly and at 1. Start a dialogue by pressing the Voice Command a normal speaking volume. button. 2. Say a command (e.g., Help).
3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say AM or Radio AM. In system is speaking. Please note the volume setting for this mode, you may say the following commands: Voice Command is different than the audio system. Frequency # (to change the frequency) Main Menu Next Station (to select the next station) Start a dialogue by pressing the Voice Command button. You may say Main Menu to switch to the main Previous Station (to select the previous station) menu. Radio Menu (to switch to the radio menu) In this mode, you can say the following commands: Main Menu (to switch to the main menu) Radio (to switch to the radio mode) Radio FM Disc (to switch to the disc mode) To switch to the FM band, say FM or Radio FM. In this mode, you may say the following commands: Memo (to switch to the memo recorder) Frequency # (to change the frequency) Setup (to switch to system setup) Next Station (to select the next station) Previous Station (to select the previous station)
Menu Radio (to switch to the radio menu) Main Menu (to switch to the main menu)
Disc To switch to the disc mode, say Disc. In this mode, you may say the following commands:
Satellite Radio Track (#) (to change the track) To switch to satellite radio mode, say Sat or Satellite Radio. In this mode, you may say the following com- Next Track (to play the next track) mands: Previous Track (to play the previous track) Channel Number (to change the channel by its Main Menu (to switch to the main menu) spoken number) Memo Next Channel (to select the next channel) To switch to the voice recorder mode, say Memo. In Previous Channel (to select the previous channel) this mode, you may say the following commands: List Channel (to hear a list of available channels) Select Name (to say the name of a channel) Menu Radio (to switch to the radio menu) Main Menu (to switch to the main menu) New Memo (to record a new memo) During the recording, you may press the Voice Command button to stop recording. You proceed by saying one of the following commands: Save (to save the memo)
Continue (to continue recording) Delete (to delete the recording)
Switch to system setup Change to setup
Play Memos (to play previously recorded memos) Main menu setup or During the playback you may press the Voice Switch to setup button to stop playing memos. You Command proceed by saying one of the following commands: In this mode, you may say the following commands: Repeat (to repeat a memo) Next (to play the next memo) Previous (to play the previous memo) Delete (to delete a memo) Delete All (to delete all memos) Language English Language French Language Spanish Tutorial Voice Training
Setup NOTE: Keep in mind that you have to press the Voice To switch to system setup, you may say on of the Command button first and wait for the beep before following: speaking the Barge In commands. Change to setup
Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect vehicle. Voice Voice Training feature may be used. button, say System 1. Press the Voice Command Setup and once you are in that menu then say Voice Training. This will train your own voice to the system and will improve recognition. 2. Repeat the words and phrases when prompted by Uconnect Voice. For best results, the Voice Training session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan switched off. This procedure may be repeated with a new user. The system will adapt to the last trained voice only.
WARNING!
It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. Be sure everyone in your vehicle is in a seat and using a seat belt properly.
Drivers Power Seat If Equipped The power seat switch is located on the outboard side of the seat near the floor. Use this switch to move the seat up or down, forward or rearward or to tilt the seat.
Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch, the front or rear of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached.
Power Seat Switch
Passenger Power Seat If Equipped Vehicles equipped with passenger power seats can only be adjusted forward and backward.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seats path. Heated Seats If Equipped On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. There are two heated seat switches that allow the driver and passenger to operate the seats independently. The controls for each seat are located on a switch bank near the bottom center of the instrument panel.
WARNING!
Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
You can choose from HIGH, LOW or OFF heat settings. NOTE: When a heat setting is selected, heat will be felt Amber indicator lights in each switch indicate the level of within two to five minutes. heat in use. Two indicator lights will illuminate for WARNING! HIGH, one for LOW and none for OFF. Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF. When the HIGH-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HIGH-level. If the HIGH-level setting is selected, the system will automatically switch to LOW-level after approximately 30 minutes of continuous operation. At that time, the number of illuminated LEDs changes from two to one, indicating the change. The LOW-level setting will turn OFF automatically after approximately 30 minutes. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.
Manual Front Seat Adjustments For models equipped with manual seats, the driver and passenger seats can be adjusted forward or rearward by using a bar by the front of the seat cushion, near the floor.
While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
WARNING!
Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
Manual Seat Adjustment
Front Seat Manual Recline To recline the seatback, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the lever once the seatback is in the upright position.
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
Recline Lever
Manual Lumbar Support If Equipped For models equipped with manual lumbar the support lever is located on the inboard side of the seat. Turn the lever downward to increase and upward to decrease the desired amount of lumbar support.
Fold-Flat Front Passenger Seat If Equipped This feature allows the front passenger seatback to fold flat for extended cargo space. Some fold flat seats also have a hardback surface that you can use as a work surface when the seat is folded flat. Pull up on the lever to fold down the seatback.
Lumbar Support Lever Fold-Flat Passenger Seat
Head Restraints Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.
WARNING!
The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Active Head Restraints Front Seats Active Head Restraints are passive, deployable components, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspection of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupants head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. Refer to Occupant Restraints in Things To Know Before Starting Your Vehicle for further information.
To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the adjustment button, located at the base of the head restraint, and push downward on the head restraint.
For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
Adjustment Button Active Head Restraint (Normal Position)
In the event of deployment of an Active Head Restraint, refer to Occupant Restraints/Resetting Active Head Restraints (AHR) in Things To Know Before Starting Your Vehicle for further information.
WARNING!
Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death. (Continued)
Active Head Restraint (Tilted)
NOTE: The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed. Rear Head Restraints The two outboard seat are equipped with adjustable head Adjustment Button restraints. To raise the head restraint, pull upward on the NOTE: head restraint. To lower the head restraint, press the The head restraints should only be removed by qualiadjustment button, located on the base of the head fied technicians, for service purposes only. If either of restraint, and push downward on the head restraint. the head restraints require removal, see your authorized dealer.
Refer to Occupant Restraints in Things To Know be sure that the front seats are fully upright and posiBefore Starting Your Vehicle for information on tether tioned forward. This will allow the rear seat to fold down routing. easily.
WARNING!
Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should be checked prior to operating the vehicle and never adjusted while the vehicle is in motion.
WARNING!
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly.
60/40 Split Folding Rear Seat With Fold-Flat Feature To provide additional storage area, each rear seat can be folded flat. This allows for extended cargo space and still maintains some rear seating room. To Lower The Rear Seat
NOTE: Prior to folding the rear seat, it may be necessary 1. Locate the release strap on the lower outboard side of to position the front seat to its mid-track position. Also, each rear seatback.
2. Pull the release strap (toward the front of the vehicle). To Raise The Rear Seat NOTE: If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. 1. If locked in the folded position, pull the release strap (toward the front of the vehicle). 2. Raise the seatback and lock it into place.
WARNING!
Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
Rear Seat Release Strap
3. Fold the rear seat completely forward. 4. If desired, push down on the seatback to lock it in the folded position.
Recliner Adjustment The rear seatback also reclines for additional passenger comfort. Pull the release strap while sitting in the rear seat to recline the seatback.
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. DRIVER MEMORY SEAT IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors and a set of desired radio station presets. The memory switch is located on the instrument panel to the left of the steering column. The switch contains a S (SET) button to activate the memory save function. It also contains a rocker switch labeled with the number (1) and the number (2). The rocker switch allows the driver to
Rear Seatback Release Strap
recall either of the two pre-programmed memory profiles 1. Turn the ignition ON. by pressing the appropriate side of the switch. 2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror and radio station presets). 3. Press and release the SET button on the memory switch, then press the side of the rocker switch labeled (1) within five seconds. The Electronic Vehicle Information Center (EVIC), if equipped, will display which memory position is being set. If desired, a second memory profile can be stored into memory as follows: 1. Turn the ignition ON.
Driver Memory Switch
Programming The Memory Feature To create a new memory profile, perform the following: NOTE: Saving a new memory profile will erase an existing profile from memory.
2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror and radio station presets).
3. Press and release the SET button on the memory switch, then press the side of the rocker switch labeled (2) within five seconds. The EVIC, if equipped, will display which memory position is being set.
NOTE: For vehicles equipped with an automatic transmission, memory profiles can be set without the vehicle in To program your RKE transmitters, perform the followPARK, but the vehicle must be in PARK to recall a ing: memory profile. 1. Remove the key from the ignition. For vehicles equipped with a manual transmission, the 2. Select the desired memory profile 1 or 2. vehicle speed must be at 0 mph (0 km/h) to recall a memory profile. 3. Press and release the SET button on the memory switch, then within five seconds press and release the The Recall Memory with Remote Key Unlock feature side of the rocker switch labeled 1 or 2 accordingly. can be turned on and off through the EVIC, if Memory Profile Set (1 or 2) will display in the EVIC, if equipped. Refer to Electronic Vehicle Information equipped. Center (EVIC)/Customer-Programmable Features in Understanding Your Instrument Panel for further 4. Press and release the LOCK button on the RKE information. transmitter within 10 seconds.
Linking And Unlinking The Remote Keyless Entry Transmitter To Memory Your Remote Keyless Entry (RKE) transmitters can be programmed to recall one of two pre-programmed memory profiles with a press of the UNLOCK button on the RKE transmitter.
NOTE: Your RKE transmitters can be unlinked to the To recall the memory settings for driver one, press memory setting by pressing the SET button followed by MEMORY button number 1 or the UNLOCK button on the UNLOCK button on the RKE transmitter in Step 4 the RKE transmitter linked to memory position 1. above. To recall the memory setting for driver two, press MEMORY button number 2 or the UNLOCK button on Memory Position Recall the RKE transmitter linked to memory position 2. NOTE: For vehicles equipped with an automatic transmission, A recall can be cancelled by pressing any of the the vehicle must be in PARK to recall memory posi- MEMORY buttons (S, 1, or 2) during a recall. When a tions. If a recall is attempted when the vehicle is not in recall is cancelled, the driver seat will stop moving. A PARK, a message will display in the EVIC, if delay of one second will occur before another recall can be selected. equipped. For vehicles equipped with a manual transmission, the vehicle speed must be at 0 mph (0 km/h) to recall memory positions. If a recall is attempted with the vehicle speed above 0 mph (0 km/h), a message will display in the EVIC, if equipped.
Easy Entry/Exit Seat (Available With Memory Seat Only) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ignition switch. When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearward if the drivers seat position is greater than or equal to 2.7 in (68 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position.
between 0.9 in and 2.7 in (23 mm and 68 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. The Easy Entry/Easy Exit feature is disabled when the drivers seat position is less than 0.9 in (23 mm) forward of the rear stop. At this position, there is no benefit to the driver by moving the seat for Easy Exit or Easy Entry. Each stored memory setting will have an associated Easy Entry and Easy Exit position.
NOTE: The Easy Entry/Easy Exit feature can be turned on or off through the programmable features in the EVIC. Refer to Electronic Vehicle Information Center (EVIC)/ Customer-Programmable Features in Understanding When you remove the key from the ignition switch, Your Instrument Panel for further information. the driver seat will move to a position 0.3 in (8 mm) forward of the rear stop if the drivers seat position is
2. Outside of the vehicle, locate the safety latch lever between the grille and hood opening (left of center when facing hood). Push the safety latch lever to the right and 1. Pull the hood release lever located under the left side then raise the hood. of the instrument panel. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood.
Hood Release
Underhood Safety Latch
Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood.
WARNING!
Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
CAUTION!
To prevent possible damage: Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. Lower the hood to approximately 6 in (15.2 cm) above the closed position and drop the hood to latch it. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
LIGHTS Multifunction Lever The multifunction lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights (if equipped).
Headlights And Parking Lights Turn the end of the multifunction lever to the first detent for parking light operation. Turn the end of the lever to the second detent for headlight operation.
Headlight Switch
Multifunction Lever
Automatic Headlights If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, turn the end of the multifunction lever to the AUTO position (third detent). When the system is on, the Headlight Time Delay feature is also on. This means the headlights will stay on for up to 90 seconds after you turn the ignition switch to the LOCK position. To turn the Automatic System off, turn the end of the multifunction lever out of the AUTO position.
Headlight Switch
NOTE: The engine must be running before the headlights will turn on in the Automatic mode.
Headlights With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
Headlight Time Delay If Equipped This feature is particularly useful when exiting your vehicle in an unlit area. It provides the safety of headlight illumination for about 90 seconds after turning the ignition switch to the LOCK position.
To activate the delay, turn the ignition switch to the LOCK position while the headlights are still on. Then, The Headlights with Wipers feature can be turned on or turn off the headlights within 45 seconds. The delay off through the Electronic Vehicle Information Center interval begins when you turn off the headlights. Only (EVIC) if equipped. Refer to Electronic Vehicle Infor- the headlights will illuminate during this time. mation Center (EVIC)/Customer-Programmable FeaIf you turn the headlights, or parking lights, or ignition tures in Understanding Your Instrument Panel for switch ON again, the system will cancel the delay. further information. If you turn the headlights off before the ignition, they will turn off in the normal manner. The Headlight delay time is programmable on vehicles equipped with the Electronic Vehicle Information Center (EVIC). Refer to Electronic Vehicle Information Center
(EVIC)/Customer-Programmable Features in Understanding Your Instrument Panel for further information. Daytime Running Lights If Equipped The headlights will turn on as Daytime Running Lights (DRL) and operate at lower intensity whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is released and the shift lever is in any position except PARK. Lights-On Reminder If the headlights or parking lights are on after the ignition is turned to the LOCK position, a chime will sound to alert the driver when the drivers door is opened.
Front Fog Light Control
NOTE: The front fog lights will only operate with the Fog Lights If Equipped headlights on low beam. Selecting high beam headlights To activate the front fog lights, turn on the parking will turn off the front fog lights. lights or the low beam headlights and pull out on the end of the multifunction lever.
Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you, to switch the headlights back to low beam. Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released.
Turn Signal Control
NOTE: If the multifunction lever is held in the flash-topass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds before activating the flash-to-pass function again. Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the parking lights or headlights are on.
Dimmer Control
Map/Reading Lights Rotate the center portion of the lever upward to the next These lights are mounted between the sun visors on the detent position to brighten the odometer and radio when overhead console and above the rear doors by the grab the parking lights or headlights are on. handles. Each light is turned on by pressing the lens. Rotate the center portion of the lever upward to the last Press the lens a second time to turn off the light. These lights also turn on when a door is opened, or when the detent to turn on the interior lighting.
UNLOCK button on the Remote Keyless Entry (RKE) WINDSHIELD WIPERS AND WASHERS transmitter is pressed, or when the dimmer control is The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers are turned completely upward to the second detent. operated by rotating a switch, located at the end of the Cargo Light lever. For information on using the rear window wiper/ The cargo light is mounted in the headliner above the washer, refer to Rear Window Features in Underrear cargo area. This light will turn on when you open the standing The Features Of Your Vehicle. liftgate or any door, or if you press the UNLOCK button on the RKE transmitter, or rotate the dimmer control on the multifunction lever completely upward to the second detent. Battery Saver Feature To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.
Wiper/Washer Lever
NOTE: The wipers will automatically return to the park position if you turn OFF the ignition switch while they are operating. The wipers will resume operation when you turn the ignition switch back to the ON Rotate the end of the lever upward to the third detent position. past the intermittent settings for high-speed wiper operaCAUTION! tion. Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. In cold weather, always turn off the wiper switch and allow the wipers to return to the Park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. Windshield Wiper Operation Rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper operation. (Continued)
Front Wiper Control
CAUTION! (Continued)
Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur. Intermittent Wiper System Use the intermittent wiper system when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the windFront Wiper Control shield wiper/washer control lever to the first detent, and then turn the end of the lever to select the desired delay There are five delay settings, which allow you to regulate the wipe interval from a minimum of one cycle every interval. second to a maximum of approximately 36 seconds between cycles or from a minimum of one cycle every second to a maximum of approximately 18 seconds between cycles at vehicle speeds greater than 10 mph (16 km/h).
NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield Washers To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired (for a maximum of 10 seconds).
WARNING!
Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use.
If you activate the washer while the wiper control is in the delay range, the wipers will operate in low-speed for Mist Feature two or three wipe cycles after releasing the lever and then Push downward on the windshield wiper/washer conresume the intermittent interval previously selected. trol lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle. If you activate the washer while the wiper control is in The wipers will continue to operate until you release the the off position, the wipers will operate for two or three lever. wipe cycles and then turn off.
NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid.
Rain Sensing Wipers If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver. This feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the windshield wiper/washer control lever to one of the five intermittent wiper settings to activate this feature. The sensitivity of the system is adjustable from the windshield wiper/washer control lever. Wiper delay position 1 is the least sensitive and wiper delay position 5 is the most sensitive. Choose position 3 for normal rain conditions. Choose position 2 or 1 if you desire less wiper sensitivity. Choose position 4 or 5 if you desire more sensitivity. Place the lever in the off position when not using the system.
Mist Control
The rain-sensing system has protective features for the NOTE: The rain-sensing feature will not operate when the wiper blades and arms. It will not operate under the following conditions: wiper speed is in the low or high position. The rain-sensing feature may not function properly Low Temperature Wipe Inhibit The rain-sensing when ice or dried salt water is present on the windfeature will not operate when the ignition is first shield. switched ON, the vehicle is stationary, and the outside temperature is below 32 F (0 C). If the wiper control Use of Rain-X or products containing wax or silicone is moved, the vehicle speed becomes greater than may reduce rain sensor performance. 0 mph (0 km/h), or the outside temperature rises The rain-sensing feature can be turned on and off above freezing the rain-sensing feature will then opthrough the Electronic Vehicle Information Center erate. (EVIC) if equipped. Refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features) in Understanding Your Instrument Panel for further information.
Neutral Wipe Inhibit The rain-sensing feature will not operate when the ignition is ON, and the shift lever is in the NEUTRAL position, and the vehicle speed is less than 5 mph (8 km/h), unless the wiper control is moved or the shift lever is moved out of the NEUTRAL position.
Headlights With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if Remote Start Wipe Inhibit (Vehicles Equipped with they were turned on by this feature. Remote Start System) The rain-sensing feature will not operate when the vehicle is in remote start mode. The Headlights with Wipers feature can be turned on or This feature will return to normal operation once off through the Electronic Vehicle Information Center remote start mode is exited. Refer to Remote Start (EVIC) if equipped. Refer to Electronic Vehicle InforSystem in Things To Know Before Starting Your mation Center (EVIC)/Personal Settings (CustomerVehicle for further information. Programmable Features) in Understanding Your Instrument Panel for further information.
TILT STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt control handle is located below the steering wheel at the end of the steering column.
To unlock the steering column, push the control handle downward. To tilt the steering column, move the steering wheel upward or downward as desired. To lock the steering column in position, pull the control handle upward until it is fully engaged.
WARNING!
Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death.
Tilt Steering Control Handle
TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column.
To unlock the steering column, pull the lever downward. To tilt the steering column, move the steering wheel upward or downward as desired. To lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. To lock the steering column in position, push the lever upward until fully engaged.
WARNING!
Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death.
Tilt/Telescoping Lever
ELECTRONIC SPEED CONTROL IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn off. The system should be turned off when not in use.
1 ON/OFF 4 CANCEL
2 RES + 3 SET -
WARNING!
Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it. To Set A Desired Speed Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed.
To Deactivate A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory. To Resume Speed To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h).
To Vary The Speed Setting When the Electronic Speed Control is set, you can inNOTE: The vehicle should be traveling at a steady crease speed by pushing the RES (+) button. If the button speed and on level ground before pressing the SET is continually pressed, the set speed will continue to button. increase until the button is released, then the new set speed will be established.
Pressing the RES (+) button once will result in a 1 mph Using Electronic Speed Control On Hills (2 km/h) increase in set speed. Each subsequent tap of The transmission may downshift on hills to maintain the vehicle set speed. the button results in an increase of 1 mph (2 km/h). To decrease speed while the Electronic Speed Control is set, push the SET (-) button. If the button is continually held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established. Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed. Each subsequent tap of the button results in a decrease of 1 mph (2 km/h). To Accelerate For Passing Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control.
WARNING!
Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
PARKSENSE REAR PARK ASSIST IF EQUIPPED The ParkSense Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver. Refer to ParkSense System Usage Precautions for limitations of this system and recommendations.
ParkSense Sensors The four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.
ParkSense Warning Display ParkSense will retain the last system state (enabled or The ParkSense Warning screen will only be displayed if disabled) from the last ignition cycle when the ignition is Sound and Display is selected from the Customer- Prochanged to the ON/RUN position. grammable Features section of the Electronic Vehicle ParkSense can be active only when the shift lever is in Information Center (EVIC). Refer to Electronic Vehicle REVERSE. If ParkSense is enabled at this shift lever Information Center (EVIC)/Personal Settings (Customerposition, the system will remain active until the vehicle Programmable Features) in Understanding Your Inspeed is increased to approximately 11 mph (18 km/h) or strument Panel for further information. above. The system will become active again if the vehicle speed is decreased to speeds less than approximately 10 mph (16 km/h).
The ParkSense Warning Display is located in the Instru- ParkSense Display ment clusters EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status. rear fascia/bumper and the detected obstacle.
Park Assist ON ParkSense Warning Display
Park Assist Off
Slow Tone
The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Fast Tone
Continuous Tone
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle:
Rear Distance (in/cm) Audible Alert Chime Display Message Arcs Radio Mute
Greater than 79 in (200 cm) None Park Assist ON None No
WARNING ALERTS 79-39 in 39-25 in (200-100 cm) (100-65 cm) Single 1/2 Slow Second Tone Warning Object Warning Object Detected Detected 3 Solid 3 Slow (Continuous) Flashing Yes Yes
25-12 in (65-30 cm) Fast Warning Object Detected 2 Slow Flashing Yes
Less than 12 in (30 cm) Continuous Warning Object Detected 1 Slow Flashing Yes
NOTE: ParkSense will MUTE the radio, if on, when the system is sounding an audio tone.
the EVIC. The available choices are: OFF, Sound Only, or Sound and Display. Refer to Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerEnabling And Disabling ParkSense Programmable Features) in Understanding Your InParkSense can be enabled and disabled with a switch strument Panel for further information. located in the switch bank of the instrument panel or through the Customer-Programmable Features section of
If SERVICE PARK ASSIST SYSTEM appears in the EVIC make sure the rear fascia/bumper is clean and clear of snow, ice, mud, dirt or other obstruction and then cycle The ParkSense switch LED will be ON when the ignition. If the message appears again, see an authoParkSense is disabled or defective. The ParkSense rized dealer. switch LED will be OFF when the system is enabled. Cleaning The ParkSense System Service The ParkSense Rear Park Assist System Clean the ParkSense sensors with water, car wash soap When the ParkSense Rear Park Assist System is mal- and a soft cloth. Do not use rough or hard cloths. Do not functioning, the instrument cluster will actuate a single scratch or poke the sensors. Otherwise, you could damchime, once per ignition cycle, and it will display the age the sensors. SERVICE PARK ASSIST SYSTEM message. Refer to
When the ParkSense switch is pressed to disable the system, the instrument cluster will display the PARK ASSIST OFF message for approximately five seconds. Refer to Electronic Vehicle Information Center (EVIC) in Understanding Your Instrument Panel for further information. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the PARK ASSIST OFF message for as long as the vehicle is in REVERSE.
Electronic Vehicle Information Center (EVIC) in Understanding Your Instrument Panel for further information. When the shift lever is moved to REVERSE and the system has detected a faulted condition, the EVIC will display the SERVICE PARK ASSIST SYSTEM message for as long as the vehicle is in REVERSE. Under this condition, ParkSense will not operate.
ParkSense System Usage Precautions
Clean the ParkSense sensors regularly, taking care not to scratch or damage them. The sensors must not NOTE: be covered with ice, snow, slush, mud, dirt or debris. Ensure that the rear bumper is free of snow, ice, mud, Failure to do so can result in the system not working dirt and debris to keep the ParkSense system operatproperly. The ParkSense system might not detect an ing properly. obstacle behind the fascia/bumper, or it could provide Jackhammers, large trucks, and other vibrations could a false indication that an obstacle is behind the fascia/ affect the performance of ParkSense. bumper. When you turn ParkSense off, the instrument cluster Objects such as bicycle carriers, trailer hitches, etc., will display PARK ASSIST OFF. Furthermore, once must not be placed within 12 in (30 cm) from the rear you turn ParkSense off, it remains off until you turn fascia/bumper while driving the vehicle. Failure to do it on again, even if you cycle the ignition key. so can result in the system misinterpreting a close object as a sensor problem, causing the SERVICE When you move the shift lever to the REVERSE PARK ASSIST SYSTEM message to be displayed in position and ParkSense is turned off, the instrument the EVIC. cluster will display PARK ASSIST OFF message for as long as the vehicle is in REVERSE. ParkSense, when on, will MUTE the radio when it is sounding a tone.
CAUTION!
ParkSense is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. The vehicle must be driven slowly when using ParkSense in order to be able to stop in time when an obstacle is detected. It is recommended that the driver looks over his/her shoulder when using ParkSense.
WARNING!
Drivers must be careful when backing up even when using the ParkSense Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death. (Continued)
Before using the ParkSense Rear Park Assist System, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the warning display turns on the single flashing arc and sounds the continuous tone. Also, the sensors could detect the ball mount and hitch ball assembly, depending on its size and shape, giving a false indication that an obstacle is behind the vehicle.
GARAGE DOOR OPENER IF EQUIPPED HomeLink replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink unit is powered by your vehicles 12 Volt battery. The HomeLink buttons, located on either the overhead console, headliner or sunvisor, designate the three different HomeLink channels. The HomeLink indicator is located above the center button.
HomeLink Buttons/Overhead Consoles
HomeLink Buttons/Sunvisor/Headliner
NOTE: HomeLink is disabled when the Vehicle Security Alarm is active.
NOTE: Before You Begin Programming HomeLink Be sure that your vehicle is parked outside of the garage Erasing all channels should only be performed when before you begin programming. programming HomeLink for the first time. Do not erase channels when programming additional buttons. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that If you have any problems, or require assistance, please call toll-free 18003553515 or, on the Internet at a new battery be placed in the hand-held transmitter of www.HomeLink.com for information or assistance. the device that is being programmed to the HomeLink system. Programming A Rolling Code Erase all channels before you begin programming. To For programming garage door openers that were manuerase the channels place the ignition in the ON/RUN factured after 1995. These garage door openers can be position and press and hold the two outside HomeLink identified by the LEARN or TRAIN button located buttons (I and III) for up 20 seconds or until the red where the hanging antenna is attached to the garage door opener. It is NOT the button that is normally used to indicator flashes. open and close the door. The name and color of the button may vary by manufacturer.
3. Simultaneously press and hold both the Homelink button you want to program and the hand-held transmitter button. 4. Continue to hold both buttons and observe the indicator light. The Homelink indicator will flash slowly and then rapidly after Homelink has received the frequency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid. 5. At the garage door opener motor (in the garage), locate the LEARN or TRAINING button. This can Training The Garage Door Opener usually be found where the hanging antenna wire is attached to the garage door opener/device motor. Firmly 1 Door Opener 2 Training Button press and release the LEARN or TRAINING button. On some garage door openers/devices there may be a 1. Turn the ignition switch to the ON/RUN position. light that blinks when the garage door opener/device is 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) in the LEARN/TRAIN mode. away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view.
NOTE: You have 30 seconds in which to initiate the next 2. Press and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds. Do not step after the LEARN button has been pressed. release the button. 6. Return to the vehicle and press the programmed HomeLink button twice (holding the button for two 3. Without releasing the button proceed with Programseconds each time). If the garage door opener/device ming A Rolling Code Step 2 and follow all remaining steps. activates, programming is complete. NOTE: If the garage door opener/device does not Programming A Non-Rolling Code activate, press the button a third time (for two seconds) to For programming Garage Door Openers manufactured before 1995. complete the training. To program the remaining two HomeLink buttons, 1. Turn the ignition switch to the ON/RUN position. repeat each step for each remaining button. DO NOT 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) erase the channels. away from the HomeLink button you wish to program Reprogramming A Single HomeLink Button while keeping the HomeLink indicator light in view. To reprogram a channel that has been previously trained, 3. Simultaneously press and hold both the Homelink follow these steps: button you want to program and the hand-held transmit1. Turn the ignition switch to the ON/RUN position. ter button.
4. Continue to hold both buttons and observe the indicator light. The Homelink indicator will flash slowly and then rapidly after Homelink has received the frequency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid.
Reprogramming A Single HomeLink Button To reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the ON/RUN position.
2. Press and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds. Do not 5. Press and hold the programmed HomeLink button release the button. and observe the indicator light. 3. Without releasing the button proceed with Program If the indicator light stays on constantly, programming A Non-Rolling Code Step 2 and follow all remainming is complete and the garage door/device ing steps. should activate when the HomeLink button is Canadian/Gate Operator Programming pressed. For programming transmitters in Canada/United States To program the two remaining HomeLink buttons, that require the transmitter signals to time-out after repeat each step for each remaining button. DO several seconds of transmission. NOT erase the channels. Canadian radio frequency laws require transmitter signals to time-out (or quit) after several seconds of transmission which may not be long enough for HomeLink
to pick up the signal during programming. Similar to this 4. Watch for the HomeLink indicator to change flash Canadian law, some U.S. gate operators are designed to rates. When it changes, it is programmed. It may take up time-out in the same manner. to 30 seconds or longer in rare cases. The garage door may open and close while you are programming. It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage 5. Press and hold the programmed HomeLink button door or gate motor. and observe the indicator light. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view. If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink button is pressed.
To program the two remaining HomeLink buttons, 3. Continue to press and hold the HomeLink button, repeat each step for each remaining button. DO while you press and release (cycle), your hand-held NOT erase the channels. transmitter every two seconds until HomeLink has successfully accepted the frequency signal. The indicator If you unplugged the garage door opener/device for light will flash slowly and then rapidly when fully programming, plug it back in at this time. trained.
Reprogramming A Single HomeLink Button Security To reprogram a channel that has been previously trained, It is advised to erase all channels before you sell or turn follow these steps: in your vehicle. 1. Turn the ignition switch to the ON/RUN position. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. Note that all 2. Press and hold the desired HomeLink button until channels will be erased. Individual channels cannot be the indicator light begins to flash after 20 seconds. Do not erased. release the button. The HomeLink Universal Transceiver is disabled when 3. Without releasing the button proceed with the Vehicle Security Alarm is active. Canadian/Gate Operator Programming Step 2 and follow all remaining steps. Using HomeLink To operate, press and release the programmed HomeLink button. Activation will now occur for the programmed device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at any time.
Troubleshooting Tips If you are having trouble programming HomeLink, here are some of the most common solutions: Replace the battery in the original hand-held transmitter. Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. Did you unplug the device for programming and remember to plug it back in? If you have any problems, or require assistance, please call toll-free 18003553515 or, on the Internet at www.HomeLink.com for information or assistance.
WARNING!
Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a stop and reverse feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982. Do not use a garage door opener without these safety features. Call toll-free 18003553515 or, on the Internet at www.HomeLink.com for safety information or assistance. Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while programming the transceiver. Exhaust gas can cause serious injury or death.
General Information POWER SUNROOF IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console. two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause undesired operation. NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device. The term IC before the certification/registration number only signifies that Industry Canada technical specifications were met.
Power Sunroof Switch
WARNING!
Never leave unattended children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passengers are properly secured too. Do not allow small children to operate the sunroof. Never allow your fingers, other body parts, or any object to project through the sunroof opening. Injury may result.
Opening Sunroof Express Press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automatically. This is called Express Open. During Express Open operation, any movement of the sunroof switch will stop the sunroof. Opening Sunroof Manual Mode To open the sunroof, press and hold the switch rearward to full open. Any release of the switch will stop the movement and the sunroof will remain in a partially opened condition until the switch is pushed and held rearward again. Closing Sunroof Express Press the switch forward and release it within one-half second and the sunroof will close automatically from any
position. The sunroof will close fully and stop automatically. This is called Express Close. During Express Close operation, any movement of the switch will stop the sunroof. Closing Sunroof Manual Mode To close the sunroof, press and hold the switch in the forward position. Any release of the switch will stop the movement and the sunroof will remain in a partially closed condition until the switch is pushed and held forward again.
Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing and moves the sunroof in the opposite direction, press the switch forward and hold. This allows the sunroof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.
Venting Sunroof Express Press and release the Vent button within one-half second and the sunroof will open to the vent position. This Pinch Protect Feature is called Express Vent, and it will occur regardless of This feature will detect an obstruction in the opening of sunroof position. During Express Vent operation, any the sunroof during Express Close operation. If an ob- movement of the switch will stop the sunroof. struction in the path of the sunroof is detected, the Sunshade Operation sunroof will automatically retract. Remove the obstrucThe sunshade can be opened manually. However, the tion if this occurs. Next, press the switch forward and sunshade will open automatically as the sunroof opens. release to Express Close.
NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation For vehicles not equipped with the Electronic Vehicle open. Information Center (EVIC), the power sunroof switch Wind Buffeting will remain active for 45 seconds after the ignition switch Wind buffeting can be described as the perception of is turned to the LOCK position. Opening either front pressure on the ears or a helicopter-type sound in the door will cancel this feature. ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) is in certain For vehicles equipped with the EVIC, the power sunroof open or partially open positions. This is a normal occur- switch will remain active for up to approximately ten rence and can be minimized. If the buffeting occurs with minutes after the ignition switch is turned to the LOCK the rear windows open, then open the front and rear position. Opening either front door will cancel this windows together to minimize the buffeting. If the feature. The time is programmable. Refer to Electronic buffeting occurs with the sunroof open, adjust the sun- Vehicle Information Center (EVIC)/Personal Settings roof opening to minimize the buffeting or open any (Customer-Programmable Features) in Understanding window. Your Instrument Panel for further information. Sunroof Maintenance SKY SLIDER FULL LENGTH OPEN ROOF IF Use only a non-abrasive cleaner and a soft cloth to clean EQUIPPED the glass panel. The Sky Slider is a full-length, soft-top, power roof that opens front to rear or rear to front.
Sky Slider Usage Precautions NOTE: The system will not operate when ambient temperature is at 4F (20C) or lower. The system will not operate at vehicle speeds of 86 mph (138 km/h) or above. Opening and closing the Sky Slider repeatedly without the engine running may run the battery down.
Opening the Sky Slider when damp, wet, or dirty can cause stains, mildew, and damage to the soft-top material and the inside of your vehicle. Make sure the Sky Slider is dry before opening. Always close the Sky Slider when leaving your vehicle, damage to the vehicle interior can occur. Do not leave the Sky Slider open for several weeks at a time. Close it occasionally to prevent discoloration in the folds of the fabric and to allow the creases to smooth out. This is especially important if the Sky Slider was opened when not completely dry.
CAUTION!
Failure to follow these cautions can cause damage to the Sky Slider vehicle contents, and the vehicle interior: Never attempt to open or close the Sky Slider when it is frozen. Wait until the Sky Slider is thawed before operating. (Continued)
WARNING!
Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you: In an accident, there is a greater risk of being thrown from a vehicle with the Sky Slider open. Always fasten your seat belt properly and make sure all passengers are properly secured too. Before operating the Sky Slider make sure that no moving parts of the Sky Slider can injure a person or animal. Never place any extremities (hands, feet, etc.) near the Sky Slider components or the roof area while operating the Sky Slider. (Continued)
If potential danger exists while opening or closing the Sky Slider in Automatic Mode, press and release the switch immediately to interrupt the operation. If potential danger exists while opening or closing the Sky Slider in Operator Mode, release the switch immediately to interrupt the operation. Do not allow small children to operate the Sky Slider. Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the Sky Slider while operating the Sky Slider switch. Such entrapment may result in serious injury or death.
Sky Slider Control Opening The Sky Slider The Sky Slider switch is located between the sun visors Using Automatic Mode on the overhead console. Press the switch rearward and release it within one-half second and the Sky Slider will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and release it within one-half second and the Sky Slider will open from the rear and move automatically toward the front of the vehicle. NOTE: During operation, any movement of the Sky Slider switch will stop the Sky Slider roof. To resume the operation from a partially open position, press and release the switch a second time.
Sky Slider Switch
NOTE: The Sky Slider switch will operate when the ignition switch is turned to the ON or ACC position.
The Sky Slider will not open from the front and the rear at the same time. The Sky Slider must close fully before opening it from the opposite end.
Using Operator Mode Press the switch rearward and hold it, the Sky Slider will open from the front and move toward the rear of the vehicle.
Press the switch forward and hold it, the Sky Slider will open from the rear and move toward the front of the If the Sky Slider is open from the rear, press the switch vehicle. rearward and hold it and the Sky Slider will move rearward. Release the switch to stop the Sky Slider NOTE: During operation, any movement of the Sky travel at any point. Slider switch will stop the Sky Slider roof. Manual Override Closing The Sky Slider The Sky Slider drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle Using Automatic Mode Press and release the button in the center of the switch losses battery power, you can close the Sky Slider by and the Sky Slider will close automatically from any turning the drive gears in the appropriate motor with a position. 6 mm Allen wrench. To do so, you must first remove the cargo lamp from the headliner. Then, insert the wrench into the Allen shaped hole in the appropriate motor and turn the wrench clockwise until the top closes
Using Operator Mode If the Sky Slider is open from the front, press the switch forward and hold it, the Sky Slider will move forward. Release the switch to stop the Sky Slider travel at any point.
completely. The left motor facing forward will close the top when it is open from the rear of the vehicle. The right motor will close the top when it is open from the front of the vehicle.
Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the Sky Slider in certain open or Anti-Pinch Protect Feature partially open positions. This is a normal occurrence and The Sky Slider will retract automatically if it detects an can be minimized. If the buffeting occurs with the rear obstruction while closing. If this occurs, remove the windows open, then open the front and rear windows obstruction and use the switch again to close the Sky together to minimize the buffeting. If the buffeting occurs Slider. with the Sky Slider open, adjust the Sky Slider opening to minimize the buffeting or open any window.
WARNING!
There is no anti-pinch protection when the Sky Slider is almost closed. Be sure to clear all objects from the Sky Slider before closing.
Sky Slider Maintenance Refer to Sky Slider Top Care in Maintaining Your Vehicle for further information.
ELECTRICAL POWER OUTLET Your vehicle is equipped with a fused 12 Volt (13 Amp) power outlet. This power outlet is located on the instrument panel, below the climate controls. It has power available when the ignition switch is in the ON or ACC position.
Insert the cigar lighter or accessory plug into the outlet for use to ensure proper operation. NOTE: To ensure proper operation a MOPAR knob and element must be used.
CAUTION!
Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
Front Power Outlet
WARNING!
To avoid serious injury or death: Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. Do not touch with wet hands. Close the lid when not in use and while driving the vehicle. If this outlet is mishandled, it may cause an electric shock and failure.
Power Outlet Fuse Location
M6 Fuse 20 A Yellow Cigar Lighter Instrument Panel
CAUTION!
Many accessories that can be plugged in draw power from the vehicles battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicles battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly. Only use these intermittently and with greater caution. (Continued)
After the use of high power draw accessories, or long periods of the vehicle not being started (with accessories still plugged in), the vehicle must be driven a sufficient length of time to allow the alternator to recharge the vehicles battery. Power outlets are designed for accessory plugs only. Do not hang any type of accessory or accessory bracket from the plug.
The rear passengers have cupholders at the rear of the CUPHOLDERS There are two cupholders for the front seat passengers, center console. located in the center console.
Rear Cupholders Front Cupholders
STORAGE
Front Storage Compartment The front storage compartment (located on the left side of Glove Box Storage Compartment the instrument panel) can hold cell phones, PDAs, and The glove box storage compartment is located on the other small items. right side of the instrument panel. Pull outward on the latch to open the storage compartment.
Front Storage Compartment Glove Box Storage Compartment
Console Storage Compartment To open, press the latch and lift the cover.
The center console has a removable storage tray which can hold cell phones, PDAs, and other small items.
Center Console
Removable Storage Tray
WARNING!
Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury. CARGO AREA FEATURES
To provide additional storage area, each rear seat can be folded flat. This allows for extended cargo space and still maintains some rear seating room. Refer to Seats in Understanding the Features of Your Vehicle for further information. Accessing The Storage Bin NOTE: The spring-loaded latches that retain the storage bin cover to the cargo load floor should not be used as cargo tie-downs.
1. Flip the spring-loaded latch pull-loops up. Cargo Load Floor The cargo load floor system has a load capacity of 400 lbs (181 kg). The load floor has a built-in storage bin that can hold a variety of items. The underside of the storage bin cover also contains a plastic lined tray. The cover can be installed with either side facing up for added utility.
4. Turn over the cover and reinstall it. NOTE: You can install the cover with either side facing upward. 5. With the cover seated in the floor, pull upward on loops and twist them one-quarter turn so that they are no longer parallel to the slots in the cover. 6. Flip the loops down.
WARNING!
Cargo Load Floor Loops
2. Pull the loops upward and twist them one-quarter turn so that they are parallel to the slots in the storage bin cover. 3. Lift the cover upward over the loops.
A loose storage bin cover thrown forward in a accident or hard stop could endanger the occupants of the vehicle. Always latch the storage bin cover to the cargo load floor with the spring-loaded latches when not accessing the storage bin.
Cargo Tie-Down Hooks And Loops The tie-downs located on cargo area floor should be used to secure loads safely when the vehicle is moving.
Cargo Tie-Down Loops
Cargo tie-down loops are located on the trim panels.

Cargo Tie-Down Hooks
WARNING!
Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or accident, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. To help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts.
WARNING!
The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. To avoid loss of control resulting in personal injury, follow these guidelines for loading your vehicle: Do not carry loads that exceed the load limits described on the label attached to the left door or left door center pillar. Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the vehicle to sway. (Continued)
Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or accident. Retractable Cargo Area Cover If Equipped
The cover, when extended, covers the cargo area to keep items out of sight. Notches in the trim panels near the liftgate opening secure the extended cover in place. The cover rolls away neatly inside its housing when not in use. You can also remove the cover from the vehicle to make more room in the cargo area.
To install the cover, position it in the vehicle so that the NOTE: The purpose of this cover is for privacy, not to flat side of the housing faces upward. Then, insert either secure loads. It will not prevent cargo from shifting or the left or the right spring-loaded post (located on the ends of the cover housing) into either of the left or the protect passengers from loose cargo. right attachment points shown. The removable retractable cargo area cover mounts in the cargo area behind the top of the rear seats.
Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the notches in the trim panels. Then, lower the cover to position the posts into the bottom of the notches and release the handle.
Installing Retractable Cargo Area Cover
Then, insert the spring-loaded post on the opposite end of the cover housing into the attachment point on the opposite side of the vehicle.
Positioning Retractable Cargo Area Cover
WARNING!
In a collision, a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment. Remove the cover from the vehicle when taken from its mounting. Do not store in the vehicle. REAR WINDOW FEATURES Rear Window Wiper/Washer The rear wiper/washer is controlled by a rotary switch located on the control lever. The control lever is located on the right side of the steering column.
Rear Wiper/Washer Control
Rotate the switch upward to the first detent position for rear wiper operation. NOTE: The rear wiper operates in an intermittent mode only.
Rotate the switch upward past the first detent to activate the rear washer. The washer pump will continue to operate as long as the switch is held (for a maximum of 10 seconds). Upon release, the wiper will cycle two times before returning to the set position. If the rear wiper is operating when the ignition is turned OFF, the wiper will automatically return to the park position. When the vehicle is restarted, the wiper will resume function at whichever position the switch is set. NOTE: The rear wiper and the rear washer will not operate If the liftgate flipper glass is open. Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors. An indicator in the button will illuminate when the rear window defroster is on. The rear window
defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time. NOTE: To prevent excessive battery drain, use the rear window defroster only when the engine is operating.
CAUTION!
Failure to follow these cautions can cause damage to the heating elements: Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water. (Continued)
Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. Keep all objects a safe distance from the window.
Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. NOTE: Crossbars are offered by MOPAR accessories.
External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the ROOF LUGGAGE RACK IF EQUIPPED luggage rack, do not exceed the maximum vehicle load NOTE: Roof rack and crossbars cannot be used on capacity. vehicles equipped with Skyslider. The load carried on the roof, when equipped with a luggage rack, must not exceed 150 lbs (68 kg), and it should be uniformly distributed over the cargo area.
CAUTION!
To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as possible and secure the load appropriately. (Continued)
Long loads, which extend over the windshield, such as wood panels or surfboards, should be secured to both the front and rear of the vehicle. Place a blanket or other protection between the surface of the roof and the load. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward loads. This is especially true on large flat loads and may result in damage to the cargo or your vehicle.
WARNING!
Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
UNDERSTANDING YOUR INSTRUMENT PANEL

CONTENTS
Instrument Panel Features . . . . . . . . . . . . . . . 222 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 223 Instrument Cluster Descriptions . . . . . . . . . . . 224 Electronic Vehicle Information Center (EVIC) If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 239 Electronic Vehicle Information Center (EVIC) Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 Oil Change Required . . . . . . . . . . . . . . . . . . 243 EVIC Main Menu . . . . . . . . . . . . . . . . . . . . 244 Compass Display / ECO (Fuel Saver Mode) If Equipped . . . . . . . . 244 Average Fuel Economy . . . . . . . . . . . . . . . . 247 Distance To Empty (DTE) . . . . . . . . . . . . . . 248 Tire PSI . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 Elapsed Time . . . . . . . . . . . . . . . . . . . . . . . 249 EVIC Units Selection (Units In Display) . . . . 249 System Status . . . . . . . . . . . . . . . . . . . . . . . 249 Personal Settings (Customer-Programmable Features) . . . . . . . 249
220 UNDERSTANDING YOUR INSTRUMENT PANEL
Media Center 230 (REQ) AM/FM Stereo Radio And 6Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 254 Operating Instructions - Radio Mode . . . . . . 254 Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . 262 Notes On Playing MP3/WMA Files . . . . . . . 264 List Button (Disc Mode For MP3/WMA Play) . . . . . . . . . 267 Info Button (Disc Mode For MP3/WMA Play) . . . . . . . . . 267 Uconnect Multimedia (Satellite Radio) If Equipped . . . . . . . . . . 269
Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Operating Instructions (Voice Command System) If Equipped . . . . . . . . . . . . . . . . 274 Operating Instructions (Uconnect Phone) If Equipped . . . . . . . 274 Media Center 130 (Sales Code RES) . . . . . . . . . 274 Operating Instructions Radio Mode . . . . . 274 Operation Instructions CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . 277 Notes On Playing MP3 Files . . . . . . . . . . . . 279 Operation Instructions - Auxiliary Mode . . . . 282
UNDERSTANDING YOUR INSTRUMENT PANEL 221
Media Center 130 With Satellite Radio (Sales Code RES+RSC). . . . . . . . . . . . . . . . . . . 282 Operating Instructions Radio Mode . . . . . 283 Operation Instructions CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . 289 Notes On Playing MP3 Files . . . . . . . . . . . . 291 List Button (CD Mode For MP3 Play) . . . . . . 293 Info Button (CD Mode For MP3 Play) . . . . . . 293 Uconnect Multimedia (Satellite Radio) If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Steering Wheel Audio Controls . . . . . . . . . . . . 298 Radio Operation . . . . . . . . . . . . . . . . . . . . . 299 CD Player . . . . . . . . . . . . . . . . . . . . . . . . . 300 CD/DVD Disc Maintenance . . . . . . . . . . . . . . 300 Radio Operation And Mobile Phones . . . . . . . 301 Climate Controls . . . . . . . . . . . . . . . . . . . . . . 301 Manual Heating And Air Conditioning . . . . . 301 Automatic Temperature Control (ATC) If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 305 Operating Tips . . . . . . . . . . . . . . . . . . . . . . 311
INSTRUMENT PANEL FEATURES
1 Air Outlet 2 Instrument Cluster 3 Storage Tray
4 Radio 5 Glove Compartment 6 Climate Control
7 Power Outlet 8 Lower Switch Bank 9 Storage Bin (if equipped)
INSTRUMENT CLUSTER
has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should 1. Fuel Gauge determine the proper tire inflation pressure for those The fuel gauge shows level of fuel in tank when ignition tires.) switch is in the ON/RUN position. As an added safety feature, your vehicle has been 2. Fuel Door Reminder equipped with a Tire Pressure Monitoring System This symbol indicates the side of the vehicle (TPMS) that illuminates a low tire pressure telltale when where the fuel cap is located. one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as 3. Low Fuel Light possible, and inflate them to the proper pressure. Driving This indicator lights when the fuel level drops to on a significantly under-inflated tire causes the tire to approximately one-eighth tank. overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect 4. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided), the vehicles handling and stopping ability. should be checked monthly when cold and Please note that the TPMS is not a substitute for proper inflated to the inflation pressure recommended tire maintenance, and it is the drivers responsibility to by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle INSTRUMENT CLUSTER DESCRIPTIONS
maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle, to ensure that the not reached the level to trigger illumination of the TPMS replacement or alternate tires and wheels allow the TPMS to continue to function properly. low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more
CAUTION!
The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use tire sealant from a can or balance beads if your vehicle is equipped with a TPMS, as damage to the sensors may result.
5. Electronic Throttle Control (ETC) Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the PARK position. The light should turn off. If the light remains lit with the engine running, your vehicle will usually be drivable; however, see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer.
6. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system, called OBD, that monitors engine and automatic transmission control systems. The light will illuminate when the key is in the ON/RUN position, before engine start. If the bulb does not come on when turning the key from OFF to ON/RUN, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the MIL after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
CAUTION!
Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required.
7. High Beam Indicator This indicator shows that the high beam headlights are on. Pull the multifunction control lever on the left side of the steering column toward you to switch to low beam. 8. Front Fog Light Indicator If Equipped This indicator will illuminate when the front fog lights are on. 9. Speedometer Shows the vehicle speed in Miles Per Hour (MPH) or kilometers per hour (km/h). 10. Turn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated.
WARNING!
A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others.
If the vehicle electronics sense that the vehicle is driven NOTE: more than 1 mile (1.6 km) with either turn signal on, a The ESC Off Indicator Light and the ESC Activation/Malfunction Indicator Light come on mocontinuous chime will sound to alert you to turn the mentarily each time the ignition switch is turned to signals off. If either indicator flashes at a rapid rate, check ON/RUN. for a defective outside light bulb. 11. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light If Equipped The ESC Activation/Malfunction Indicator Light in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position. It should go out with the engine running. If the ESC Activation/Malfunction Indicator Light comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was turned off previously. The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. 12. Charging System Light This light shows the status of the electrical charging system. The light should come on when the ignition switch is first turned to ON/RUN and remain on briefly as a bulb check. If the light stays on or comes on while driving, turn off some of the vehicles non-essential electrical devices or increase engine speed (if at idle). If
the charging system light remains on, it means that the 14. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System vehicle is experiencing a problem with the charging (ABS). The light will turn on when the ignition system. Obtain SERVICE IMMEDIATELY. See an authoswitch is turned to the ON/RUN position and rized dealer. may stay on for as long as four seconds. If jump starting is required, refer to Jump Starting If the ABS light remains on or turns on while driving, it Procedures in What To Do In Emergencies. indicates that the Anti-Lock portion of the brake system 13. Oil Pressure Warning Light is not functioning and that service is required. However, This light indicates low engine oil pressure. The the conventional brake system will continue to operate light should turn on momentarily when the engine normally if the BRAKE warning light is not on. is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A If the ABS light is on, the brake system should be serviced chime will sound for four minutes when this light turns as soon as possible to restore the benefits of Anti-Lock on. brakes. If the ABS light does not turn on when the ignition switch is turned to the ON/RUN position, have Do not operate the vehicle until the cause is corrected. the light inspected by an authorized dealer. This light does not indicate how much oil is in the engine. The engine oil level must be checked under the hood. 15. Tachometer This gauge measures engine revolutions-per-minute (RPM x 1000). When the engine RPM are kept within the
green area, you are driving the vehicle in a fuel efficient 18. TOW/HAUL Indicator If Equipped This light will illuminate when selecting manner. Before the pointer reaches the red area, ease up TOW/HAUL. The TOW/HAUL button is loon the accelerator to prevent engine damage. cated on the gearshift bezel. 16. 4WD LOW Indicator If Equipped This light alerts the driver that the vehicle is in 19. 4WD Indicator Vehicles Equipped with the 4WD LOW mode. In this mode, the front Command-Trac driveshaft and rear driveshaft are mechanically This light alerts the driver that the vehicle is in locked together forcing the front and rear the four-wheel drive mode. In this mode, the wheels to rotate at the same speed. front driveshaft and rear driveshaft are me17. Hill Descent Control Indicator If Equipped chanically locked together forcing the front and The symbol indicates the status of the Hill rear wheels to rotate at the same speed. Descent Control (HDC) feature. The lamp will 20. Electronic Stability Control (ESC) OFF Indicator be on solid when HDC is armed. HDC can only Light If Equipped be armed when the transfer case is in the 4WD This light indicates the Electronic Stability ConLOW position and the vehicle speed is less then 30 mph trol (ESC) is off. (48 km/h). If these conditions are not met while attempting to use the HDC feature, the HDC indicator light will flash on/off.
21. SERV (Service) 4WD Indicator Light If Equipped The SERV 4WD Indicator Light will turn on when the ignition key is turned to the ON/ RUN position and it will stay on for two seconds. If the light stays on or turns on during driving, it means that the 4WD system is not functioning properly and that service is required. 22. Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass H, the indicator will continuously flash and a continuous chime will occur until the engine is allowed to cool.
If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. Refer to If Your Engine Overheats in What To Do In Emergencies for further information. 23. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range.
CAUTION!
Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads H pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the H and you hear continuous chimes, turn the engine off immediately and call an authorized dealership for service.
WARNING!
A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealership for service if your vehicle overheats. If you decide to look under the hood yourself, see Maintaining Your Vehicle. Follow the warnings under the Cooling System Pressure Cap paragraph. 24. Transmission Temperature Warning Light If Equipped This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this light turns on, safely pull over and stop the vehicle. Then, shift the transmission into NEUTRAL and run the engine at idle or faster until the light turns off.
CAUTION!
Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure.
WARNING!
If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. 25. Odometer / Trip Odometer / ECO (Fuel Saver Indicator) Button
display. Trip A or Trip B will appear when in the trip odometer mode. On vehicles equipped with a Base Cluster, press and release it once again to display the outside temperature. On vehicles equipped with Electronic Vehicle Information Center (EVIC), refer to Electronic Vehicle Information Center (EVIC) If Equipped for details. Resetting the Trip Odometer Display the trip mileage that you want to reset, Trip A or Trip B. Then push and hold the button (approximately two seconds) until the display resets to 0. The odometer must be in Trip Mode to reset the trip odometer.
26. 4WD Indicator Vehicles Equipped with Selec-Trac II This light alerts the driver that the vehicle is in Changing the Display the full-time four-wheel drive auto mode. In Press this button to change the display from odometer to this mode, the system operates with a normal either of the two trip odometer settings or the ECO
torque split of 42% front axle and 58% rear axle. It can the repair/service, so that you can be sure that it is redirect up to 100% of torque to the front or rear axle, if properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero. necessary. 27. Odometer Display/Trip Odometer Display The odometer display shows the total distance the vehicle has been driven. The trip odometer shows individual trip mileage. Refer to Trip Odometer button for additional information. NOTE: U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before Vehicle Odometer Messages When the appropriate conditions exist, the following messages will display in the odometer: ECO . . . . . . . . . . . . . . . . . . . Fuel Saver Indicator Off ECO-ON . . . . . . . . . . . . . . . . Fuel Saver Indicator On door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door Ajar gATE . . . . . . . . . . . . . . . . . . . . . . . . . . . Liftgate Ajar gLASS . . . . . . . . . . . . . . . . . . . . . . Flipper Glass Ajar LoW tirE . . . . . . . . . . . . . . . . . . . . . Low Tire Pressure gASCAP . . . . . . . . . . . . . . . . . . . . . . . Fuel Cap Fault noFUSE . . . . . . . . . . . . . . . . . . . . . . . . . . Fuse Fault CHAngE OIL . . . . . . . . . . . . . . . Oil Change Required On vehicles equipped with a Premium Instrument Cluster, this display shows the Electronic Vehicle Information
Center (EVIC) messages when the appropriate conditions gASCAP Message exist. Refer to Electronic Vehicle Information Center If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the (EVIC) for further information. words gASCAP will display in the odometer display ECO / ECO-ON (Fuel Saver Indicator) If Equipped area. If this occurs, tighten the fuel filler cap properly and The ECO-ON indicator will illuminate when you are press the odometer reset button to turn off the message. driving in a fuel efficient manner and can be used to If the problem continues, the message will appear the modify driving habits in order to increase fuel economy. next time the vehicle is started. The ECO display will toggle between ECO and ECO-ON depending on driving habits and vehicle usage. Press the A loose, improperly installed, or damaged fuel filler cap Odometer / Trip Odometer / ECO (Fuel Saver Indicator) may also turn on the Malfunction Indicator Light (MIL). button to change the display from odometer to either of noFUSE the two trip odometer settings or the ECO display. If the vehicle diagnostic system determines that the Ignition Off Draw (IOD) fuse is improperly installed, or LoW tirE When the appropriate condition exists, the odometer damaged, a noFUSE message will display in the odomdisplay will toggle between LoW and tirE for three eter display area. For further information on fuses and cycles. fuse locations refer to Fuses in Maintaining Your Vehicle.
CHAngE OIL Message (Base And Mid Line Clusters Only) Your vehicle is equipped with an engine oil change indicator system. The CHANgE OIL message will flash in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure:
2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. 28. Cruise Indicator If Equipped This indicator lights when the electronic speed control system is turned on. 29. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster. It displays the gear position of the automatic transmission.
30. Seat Belt Reminder Light When the ignition switch is first turned to ON/ RUN, this light will turn on for four to eight 1. Turn the ignition switch to the ON/RUN position. seconds as a bulb check. During the bulb check, if Do not start the engine.
the drivers seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the Seat Belt Warning Light will flash or remain on continuously. Refer to Occupant Restraints in Things To Know Before Starting Your Vehicle for further information. 31. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until the cause is corrected.
NOTE: The light may flash momentarily during sharp If the light remains on when the parking brake has been cornering maneuvers, which change fluid level condidisengaged, and the fluid level is at the full mark on the tions. The vehicle should have service performed, and master cylinder reservoir, it indicates a possible brake the brake fluid level checked. hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake
If brake failure is indicated, immediate repair is neces- unless the parking brake is applied or a brake fault is sary. detected. If the light does not illuminate, have the light inspected by an authorized dealer.
WARNING!
Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately.
The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application.
Vehicles equipped with the Anti-Lock Brake System 32. Vehicle Security Light If Equipped This light will flash rapidly for approximately (ABS), are also equipped with Electronic Brake Force 16 seconds when the vehicle security system is Distribution (EBD). In the event of an EBD failure, the arming and then flash slowly when the system Brake Warning Light will turn on along with the ABS is armed. The light will also turn on for about Light. Immediate repair to the ABS system is required. three seconds when the ignition is first turned to ON/ Operation of the Brake Warning Light can be checked by RUN. turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off
33. Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to Occupant Restraints in Things To Know Before Starting Your Vehicle for further information. 34. Electronic Vehicle Information Center (EVIC) / Compass Display If Equipped On vehicles equipped with a Premium Cluster, this display shows the Electronic Vehicle Information Center (EVIC) messages when the appropriate conditions exist. Refer to Electronic Vehicle Information Center (EVIC) If Equipped for further information. On vehicles equipped with a Mid Line Cluster, this display shows the compass heading (N, S, E, W, NE, NW, SE, and SW) and the outside temperature.
ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) IF EQUIPPED The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster.
Electronic Vehicle Information Center (EVIC)
This system conveniently allows the driver to select a The system allows the driver to select information by variety of useful information by pressing the switches pressing the following buttons mounted on the steering mounted on the steering wheel. The EVIC consists of the wheel: following: Compass Heading (N, S, E, W, NE, NW, SE, SW) Outside Temperature (F or C) Audio Information/ECO Display Fuel Economy Miles/kilometers To Empty Tire Pressure Status if equipped Timer Display Units Selection System Warnings (Door Ajar, etc.) Personal Settings (Customer-Programmable Features)
EVIC Steering Wheel Buttons
COMPASS Button MENU Button Press and release the MENU button to advance Press and release the COMPASS/ TEMPERATURE button to display one of eight the display to each of the EVIC Main Menu compass readings and the outside temperature features. Upon reaching the last item in the when the current screen is not the Compass/ Main Menu the EVIC will advance to the first item in the Main Menu with the next MENU button press Outside Temp screen. and release. Electronic Vehicle Information Center (EVIC) Displays DOWN Button Press and release the DOWN button when When the appropriate conditions exist, the EVIC displays prompted by the EVIC to step through stored the following messages: system warning message or Personal Settings Low Tire Pressure features. Spare Low Pressure SELECT Button Press and release the SELECT button when Premium TPMS Graphic Display prompted by the EVIC to reset features with a Key in Ignition reset capability or to change Personal Settings. Turn Signal On (with a continuous warning chime) Left Front Turn Signal Lamp Out (with a single chime)
Left Rear Turn Signal Lamp Out (with a single chime) Personal Settings Not Avail Vehicle Not in Park automatic transmission Right Front Turn Signal Lamp Out (with a single Personal Settings Not Avail Vehicle in Motion chime) manual transmission Right Rear Turn Signal Lamp Out (with a single chime) Door Ajar (with vehicle graphic showing which door is open. A single chime sounds if the vehicle is in Key Fob Battery Low (with a single chime) motion) Memory #1/#2 Profile Set Doors Ajar (with vehicle graphic showing which doors Memory #1/#2 Profile Recall are open. A single chime sounds if the vehicle is in motion) Memory System Disabled Vehicle Not in Park (with a single chime) automatic transmission Gate (with vehicle graphic showing the Liftgate open and A single chime) Memory System Disabled Vehicle in Motion (with a Low Tire (with a graphic of the car showing which single chime) manual transmission tire(s) is/are low with a single chime) Memory System Disabled Seat Belt Buckled (with a single chime)
Service TPM System (with a single chime). Refer to Unless reset, this message will continue to display each Tire Pressure Monitoring System in Starting And time you turn the ignition switch to the ON position. To turn off the message temporarily, press and release the Operating. SELECT button. To reset the oil change indicator system Check Gascap (refer to Adding Fuel in Starting (after performing the scheduled maintenance), perform And Operating for more details) the following procedure: Service Park Assist System (with a single chime) 1. Turn the ignition switch to the ON position. Do not start the engine. Oil Change Required (with a single chime) ECO (Fuel Saver Indicator) if equipped Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The Oil Change Required message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.
EVIC Main Menu To step to each main menu feature press and release the MENU button once for each step. A step from the last item in the list will cause the first item in the feature list to be displayed. The following features are in the Main menu: Compass, Outside Temperature, Information/ECO display Average Fuel Economy Distance to Empty Tire Pressure Status display Elapsed Time EVIC Units Selection System Status Personal Settings and
NOTE: For features in the EVIC that can be reset (Average Fuel Economy and Elapsed Time), the EVIC prompts a reset with a SELECT button graphic and the word RESET next to it.
When the SELECT button is pressed, the selected feature will reset and RESET ALL will display next to the Audio SELECT button graphic. Pressing SELECT a second time will reset both Average Fuel Economy and Elapsed Time. After three seconds without pressing SELECT, RESET ALL will return to RESET and only the selected feature will have been reset. Compass Display / ECO (Fuel Saver Mode) If Equipped The compass readings indicate the direction the vehicle is facing. Press and release the COMPASS button to display one of eight COMPASS compass headings, the outside temperature,
Button
and audio information (if the radio is on)/ECO if the This feature allows you to monitor when you are driving in a fuel efficient manner, and it can be used to modify EVIC display is not already displaying this screen. driving habits in order to increase fuel economy. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to Automatic Compass Calibration be driven several minutes before the updated tempera- This compass is self-calibrating, which eliminates the ture is displayed. Engine temperature can also affect the need to set the compass manually. When the vehicle is displayed temperature; therefore, temperature readings new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated. You may are not updated when the vehicle is not moving. also calibrate the compass by completing one or more ECO (Fuel Saver Mode) If Equipped 360degree turns (in an area free from large metal or The ECO message will display below the outside temmetallic objects) until the CAL message displayed in perature in the EVIC display (if the audio system is on the EVIC turns off. The compass will now function the ECO indicator will override the audio information normally. display line) if the Display Fuel Saver personal setting is ON see Personal Settings (Customer-Programmable NOTE: A good calibration requires a level surface and Features). This message will appear whenever you are an environment free from large metallic objects such as driving in a fuel efficient manner. buildings, bridges, underground cables, railroad tracks, etc.
Manual Compass Calibration If the compass appears erratic and the CAL indicator does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows:
5. Complete one or more 360degree turns (in an area free from large metal or metallic objects) until the CAL indicator turns off. The compass will now function normally.
1. Start the engine. Leave the shift lever in PARK in order Compass Variance Compass Variance is the difference between Magnetic to enter the EVIC Programming Menus. North and Geographic North. To compensate for the 2. Press the MENU button until the Personal Settings differences, the variance should be set for the zone where (Customer-Programmable Features) menu displays in the the vehicle is driven, per the zone map. Once properly EVIC. set, the compass will automatically compensate for the 3. Press the DOWN button until Calibrate Compass differences and provide the most accurate compass heading. displays in the EVIC. 4. Press and release the SELECT button to start the NOTE: Magnetic materials should be kept away from calibration. The CAL indicator will display in the the top of the right rear quarter window. This is where the compass sensor is located. EVIC.
3. Press the DOWN button until Compass Variance displays in the EVIC. 4. Press and release the SELECT button until the proper variance zone is selected according to the map. NOTE: The Variance Values will wrap around from 15 back to 1. The Default Variance is Zone 8. 5. Press and release the COMPASS button to exit. Average Fuel Economy Shows the average fuel economy since the last reset. Average Fuel Economy can be reset by pressing and holding the SELECT button (as prompted in the EVIC display). Upon reset, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
Compass Variance Map
To Change The Compass Variance: 1. Turn the ignition switch ON. 2. Press the MENU button until the Personal Settings (Customer-Programmable Features) menu displays in the EVIC.
Distance To Empty (DTE)
Tire PSI Press and release the MENU button until Tire PSI is Shows the estimated distance that can be traveled with displayed. the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous Tire pressure information is displayed as follows: and average fuel economy, according to the current fuel If tire pressure is OK for all tires, TIRE and a vehicle tank level. DTE cannot be reset. graphic are displayed with tire pressure values in each corner or the graphic. NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of If one or more tires have low pressure, LOW TIRE and the vehicle, regardless of the DTE display value. a vehicle graphic are displayed with tire pressure values in each corner of the graphic. Tire pressure When the DTE value is less than 30 miles (48 km) values that are too low will be flashing. estimated driving distance, the DTE display will change to a text display of LOW FUEL. This display will If the Tire Pressure System requires service, Service continue until the vehicle runs out of fuel. Adding a TPM System is displayed. Tire PSI is an information significant amount of fuel to the vehicle will turn off the only function and cannot be reset. LOW FUEL text and a new DTE value will display.
Elapsed Time
System Status
Shows the total elapsed time of travel since the last reset. Displays SYSTEM OK if there are no active Warning Elapsed time will increment when the ignition switch is Messages stored. Pressing and releasing the DOWN in the RUN or START position. button when SYSTEM OK is displayed will do nothing. Displays SYSTEM WARNINGS PRESENT if there are Elapsed time is displayed as follows: active Warning Messages stored. Pressing and releasing hours:minutes:seconds the DOWN button when SYSTEM WARNINGS PRESENT is displayed will display each stored warning for Elapsed time can be reset by pressing and holding the each button press. Press and Release the MENU button to SELECT button (as prompted in the EVIC display). Upon return to the Main Menu. reset all digits will change to zeros and time will start incrementing again if the ignition switch is in RUN or Personal Settings (Customer-Programmable Features) START. Personal Settings allows the driver to set and recall EVIC Units Selection (UNITS IN Display) features when the vehicle speed is at 0 mph (0 km/h) Displays the units used for the Outside Temperature, (manual transmission) or when the shift lever is in PARK Average Fuel Economy, Distance to Empty and Tire (auto transmission). Pressure features. Press and release the SELECT button to Press and release the MENU button until Personal Settoggle units between U.S. and METRIC. tings displays in the EVIC then press the SELECT button.
Use the DOWN button to display one of the following RKE Unlock When Driver Door 1st Press is selected, only the drivers choices: door will unlock on the first press of the Remote Keyless Language Entry (RKE) transmitter UNLOCK button. When Driver When in this display you may select one of five lanDoor 1st Press is selected, you must press the RKE guages for all display nomenclature, including the trip transmitter UNLOCK button twice to unlock the passenfunctions and the navigation system (if equipped). Press gers doors. When All Doors 1st Press is selected, all of the SELECT button while in this display to select English, the doors will unlock on the first press of the RKE Espanol, Deutsch, Italiano, or Francais. Then, as you transmitter UNLOCK button. To make your selection, continue, the information will display in the selected press and release the SELECT button until Driver Door language. 1st Press or All Doors 1st Press appears. Auto Unlock On Exit RKE Linked To Memory If Equipped When ON is selected, all doors will unlock when the When on is selected, you can use your RKE transmitter to vehicle is stopped and the transmission is in the PARK or recall one of two pre-programmed memory profiles. Each NEUTRAL position and the drivers door is opened. To memory profile contains desired position settings for the make your selection, press and release the SELECT driver seat, side mirror and a set of desired radio station button until ON or OFF appears. presets. When OFF is selected, only the memory switch on the drivers door panel will recall memory profiles. To make your selection, press and release the SELECT
button until ON or OFF appears. Refer to Driver Headlamp Off Delay Memory Seat in Understanding The Features Of Your When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds Vehicle for more information. when exiting the vehicle. To make your selection, press Sound Horn With Lock and release the SELECT button until 0, 30, 60, or When on is selected, a short horn sound will occur when 90 appears. the RKE transmitter LOCK button is pressed. This feature may be selected with or without the Flash Lamp with Headlamps With Wipers Remote Key Lock feature. To make your selection, press (Available with Auto Headlights Only) and release the SELECT button until On or Off When on is selected, and the headlight switch is in the AUTO position, the headlights will turn on approxiappears. mately 10 seconds after the wipers are turned on. If the Flash Lamp With Lock headlights were turned on by this feature they will also When on is selected, the front and rear turn signals will turn off when the wipers are turned off. To make your flash when the doors are locked or unlocked with the selection, press and release the SELECT button until RKE transmitter. This feature may be selected with or ON or OFF appears. without the Sound Horn with Lock feature selected. To make your selection, press and release the SELECT button until ON or OFF appears.
NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to Lights in Understanding The Features Of Your Vehicle.
Easy Exit Seat If Equipped This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the Illumination Approach vehicle. To make your selection, press and release the When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are SELECT button until On or Off appears. unlocked with the RKE transmitter. To make your selecNOTE: The seat will return to the memorized seat tion, press and hold the SELECT button until OFF, location (if Recall Memory with Remote Key Unlock is set 30 sec, 60 sec, or 90 sec appears. to ON) when the RKE transmitter is used to unlock the door. Refer to Driver Memory Seat in Understanding Park Assist The Rear Park Assist system will scan for objects behind The Features Of Your Vehicle for further information. the vehicle when the transmission is in the REVERSE Key-Off Power Delay position and the vehicle speed is less than 11 mph When this feature is selected, the power window (18 km/h). The system can be enabled with Sound Only, switches, radio, handsfree system (if equipped), DVD Sound and Display, or turned OFF through the EVIC, to video system (if equipped), power sunroof (if equipped),
and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front vehicle door will cancel this feature. To make your selection, press and release the SELECT button until OFF, 45 sec., 5 min., or 10 min. appears.
make your selection, press and release the SELECT button. Refer to Rear Park Assist System in Understanding The Features Of Your Vehicle for system function and operating information.
Display Units In The EVIC can be changed between English and Metric units of measure. The units apply to the Outside Temperature, Average Fuel Economy, Distance to Empty, and Tire Pressure displays. To make your selection, press and Hill Start Assist (HSA) If Equipped release the SELECT button until U.S. or METRIC When on is selected, the HSA system is active. Refer to appears. Electronic Brake Control System in Starting And Operating for system function and operating informa- Display Fuel Saver If Equipped tion. To make your selection, press and release the The ECO message is located in the Compass/ Temperature display; this message can be turned on or SELECT button until ON or OFF appears. off. To make your selection, press and release the SELECT Rain Sensing Intermittent Wipers If Equipped button until ON or OFF appears. When ON is selected, the system will automatically activate the windshield wipers if it senses moisture on Compass Variance the windshield. To make your selection, press and release Refer to Compass Display for more information. the SELECT button until ON or OFF appears. When Calibrate Compass OFF is selected, the system reverts to the standard Refer to Compass Display for more information. intermittent wiper operation.
MEDIA CENTER 230 (REQ) AM/FM STEREO RADIO AND 6DISC CD/DVD CHANGER (MP3/WMA AUX JACK)
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate. Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the ON/VOLUME control knob to the right increases the volume and to the left decreases it. When the audio system is turned ON, the sound will be set at the same volume level as last played.
Media Center 230 (REQ)
SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station in AM, FM or Satellite (if equipped) frequencies, pausing for five seconds at each listenable station before continuing to the next. To stop the search, press the SCAN button a second time.
Voice Command Button Uconnect Phone If Equipped Press this button to operate the Uconnect Phone feature (if equipped). Refer to Voice Command in the Uconnect User Manual located on the DVD for further details. If your vehicle is not equipped with or this feature is not available on your vehicle, a Not Equipped With Uconnect Phone message will display on the radio screen. Phone Button Uconnect Phone If Equipped Press this button to operate the Uconnect Phone feature (if equipped). Refer to Uconnect Phone in the Uconnect User Manual located on the DVD for further details.
If your vehicle is not equipped with or this feature is not 4. Adjust the minutes using the right side TUNE/ available on your vehicle, a Not Equipped With SCROLL control knob. Press the TUNE/SCROLL control Uconnect Phone message will display on the radio knob to save the time change. screen. 5. To exit, press any button/knob or wait five seconds. TIME Button The clock can also be set by pressing the SETUP button Press the TIME button to alternate locations of the time and selecting the SET HOME CLOCK entry. Once in and frequency display. this display follow the above procedure, starting at step 2. Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. INFO Button Press the INFO button for an RDS station (one with call 2. Adjust the hours by turning the right side TUNE/ letters displayed). The radio will return a Radio Text SCROLL control knob. message broadcast from an FM station (FM mode only). 3. After adjusting the hours, press the right side TUNE/ RW/FF SCROLL control knob to set the minutes. The minutes Pressing the RW (Rewind) or FF (Fast Forward) buttons will begin to blink. causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in AM, FM or Satellite (if equipped) frequencies.
Push the rotary TUNE/SCROLL control knob a fourth TUNE Control Turn the rotary TUNE/SCROLL control knob clockwise time and BALANCE will display. Turn the TUNE/ to increase or counterclockwise to decrease the frequency. SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers. Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS Push the rotary TUNE/SCROLL control knob a fifth time will display. Turn the TUNE/SCROLL control knob to and FADE will display. Turn the TUNE/SCROLL control knob to the left or right to adjust the sound level between the right or left to increase or decrease the bass tones. the front and rear speakers. Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL Push the rotary TUNE/SCROLL control knob again to control knob to the right or left to increase or decrease the exit setting tone, balance, and fade. mid-range tones. MUSIC TYPE Button Push the rotary TUNE/SCROLL control knob a third Pressing this button once will turn on the Music Type time and TREBLE will display. Turn the TUNE/SCROLL mode for five seconds. Pressing the MUSIC TYPE button control knob to the right or left to increase or decrease the or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be setreble tones. lected. Many radio stations do not currently broadcast Music Type information.
Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies Personality 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Persnlty
Program Type Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather
16-Digit Character Display Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R & B Sports Talk Top 40 Weather
By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode.
If a preset button is activated while in the Music Type DVD Play Options - Selecting the DVD Play Options (Program Type) mode, the Music Type mode will be will display the following: exited and the radio will tune to the preset station. Subtitle Repeatedly pressing SELECT will switch subtitles to different subtitle languages that are SETUP Button Pressing the SETUP button allows you to select between available on the disc (if equipped). the following items: Audio Stream Repeatedly pressing SELECT will switch to different audio languages (if supported on NOTE: Turn the TUNE/SCROLL control knob to scroll the disc) (if equipped). through the entries. Push the AUDIO/SELECT button to select an entry and make changes. Angle Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current equipped). highlighted selection. Use the remote control to scroll NOTE: up and down the menu (if equipped). The available selections for each of the above entries DISC Play/Pause - You can toggle between varies depending upon the disc. playing the DVD and pausing the DVD by These selections can only be made while playing a pushing the SELECT button (if equipped). DVD.
VES Power - Allows you to turn VES ON and Menu Language If Equipped Selecting this item will allow the user to choose the OFF (if equipped). default startup DVD menu language (effective only if VES Lock - Locks out rear VES remote controls (if language supported by disc). If you want to select a equipped). language not listed, then scroll down and select other. VES CH1/CH2 - Allows the user to change the Enter the four-digit country code using the TUNE/ mode of either the IR1 or IR2 wireless headphones by SCROLL control knob to scroll up and down to select the number and then push to select. pressing the AUDIO/SELECT button (if equipped). Set Home Clock - Pressing the SELECT button allows you to set the clock. Turn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. Press the TUNE/SCROLL control knob again to save changes. Player Defaults - Selecting this item will allow the user to scroll through the following items and set defaults according to customer preference. Audio Language If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting other. Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select.
Subtitle Language If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting other. Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select.
AutoPlay If Equipped When this is set to On and a DVD video is inserted, it will bypass the DVD menu screen and automatically play the movie. In some rare cases, the DVD player may not auto-play the main title. In such cases, use the MENU button on the remote control to select desired title to play.
NOTE: The user will have to set these defaults before Subtitles If Equipped loading a disc. If changes are made to these settings after Selecting this item allows you to choose between subtitle a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the Off or On. customer-preferred settings. Audio DRC If Equipped Selecting this item allows you to limit maximum audio AM and FM Buttons dynamic range. The default is set to High, and under Press the buttons to select AM or FM mode. this setting, dialogues will play at 11 db higher than if the SET Button To Set the Pushbutton Memory setting is Normal. When you are receiving a station that you wish to commit to pushbutton memory, press the SET button. Aspect Ratio If Equipped Selecting this item allows you to choose between wide The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station screen, pan scan, and letter box.
and press and release that button. If a button is not selected within five seconds after pressing the SET button, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}. DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD Every time a preset button is used, a corresponding player, it will not play the disc. Customers may take their vehicle to an authorized dealer to change the region code button number will display. of the player a maximum of five times.
CAUTION!
The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate Disc Hot and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components.
Radio display will show LOADING DISC when the disc is loading and READING DISC when the radio is reading the disc.
CAUTION!
This CD player will accept 43/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism.
NOTE: The ignition switch must be in the ON or ACC Eject Button Ejecting Compact Disc(s) position to operate the radio. Press the EJECT button and the pushbutton LOAD Button Loading Compact Disc(s) with the corresponding number (1-6) where the Press the LOAD button and the pushbutton with the CD was loaded and the disc will unload and corresponding number (1-6) where the CD is being move to the entrance for easy removal. Radio loaded. The radio will display PLEASE WAIT and display will show EJECTING DISC when the disc is prompt when to INSERT DISC. After the radio displays being ejected and prompt the user to remove the disc. INSERT DISC, insert the CD into the player. Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio.
The disc can be ejected with the radio and ignition OFF. RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will SEEK Button (CD MODE) begin to fast forward until FF is released, or RW or Press the right SEEK button for the next selection on the another CD button is pressed. The RW (Rewind) button CD. Press the left SEEK button to return to the beginning works in a similar manner. of the current selection, or return to the beginning of the previous selection if the CD is within the first second of AM or FM Button (CD MODE) the current selection. Pressing and holding the SEEK Switches the radio into the AM or FM radio mode. button will allow you to scroll through the tracks faster in Notes On Playing MP3/WMA Files CD and MP3/MWA modes. The radio can play MP3/WMA files; however, acceptable MP3/WMA file recording media and formats are limited. SCAN Button (CD MODE) Press the SCAN button to scan through each track on the When writing MP3/WMA files, pay attention to the CD currently playing. following restrictions. TIME Button (CD MODE) Supported Media (Disc Types) Press this button to change the display from a large CD The MP3/WMA file recording media supported by the playing time display to a small CD playing time display. radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video, DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3.
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: Maximum number of directory levels: 8 Maximum number of files: 255 Maximum number of folders: 100
Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3/ WMA files). Discs created with an option such as keep disc open after writing are most likely multisession discs. The use of multisession for CD audio or MP3/ WMA playback may result in longer disc loading times. If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc.
Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files Maximum number of characters in file/folder names: named with the *.MP3/WMA extension may cause play Level 1: 12 (including a separator . and a three- back problems. The radio is designed to recognize the file character extension) as an invalid MP3/WMA and will not play the file. Level 2: 31 (including a separator . and a threecharacter extension)
When using the MP3/WMA encoder to compress audio WMA Sampling FreBit Rate (kbps) data to an MP3/WMA file, the bit rate and sampling Specification quency (kHz) frequencies in the following table are supported. In 48, 64, 96, 128, WMA 44.1 and 48 addition, variable bit rates (VBR) are also supported. The 160, 192 VBR majority of MP3/WMA files use a 44.1 kHz sampling rate ID3 Tag information for artist, song title, and album title and a 192, 160, 128, 96 or VBR bit rates. are supported for ID3 version 1 tags. ID3 version 2 is not MPEG Sampling FreBit Rate (kbps) supported by the radios. Specification quency (kHz) MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 160, 128, 144, 112, 96, 80, 64, 56, 48 Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
24, 22.05, 16
Loading times for playback of MP3/WMA files may be begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain affected by the following: playable files). Media - CD-RW media may take longer to load than The folder list will time out after five seconds. CD-R media Medium formats - Multisession discs may take longer INFO Button (DISC Mode for MP3/WMA Play) Pressing the INFO button repeatedly will scroll through to load than non-multisession discs the following TAG information: Song Title, Artist, File Number of files and folders - Loading times will Name, and Folder Name (if available). increase with more files and folders Press the INFO button once more to return to elapsed To increase the speed of disc loading, it is recommended time priority mode. to use CD-R media and single-session discs. To create a single-session disc, enable the Disc at Once option Press and hold the INFO button for three seconds or before writing to the disc. more and radio will display song titles for each file. LIST Button (DISC Mode for MP3/WMA Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will
Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function. allows the user to plug in a portable device such as an MP3/WMA player, cassette player, or microphone and utilize the vehicles audio system to amplify the source and play through the vehicle speakers. TIME Button (Auxiliary Mode) Press the TIME button to change the display from Pressing the AUX button will change the mode to auxilelapsed playing time to time of day. The time of day will iary device if the AUX jack is connected. display for five seconds. NOTE: The AUX device must be turned on and the RW/FF (Auxiliary Mode) devices volume set to the proper level. If the AUX audio No function. is not loud enough, turn the devices volume up. If the AUX audio sounds distorted, turn the devices volume SET Button (Auxiliary Mode) down. No function. SEEK Button (Auxiliary Mode) No function. SCAN Button (Auxiliary Mode) No function. Operating Instructions Voice Command System (If Equipped) For the radio, Refer to Voice Command in the Uconnect User Manual located on the DVD for further details.
intended for home and other limited viewing uses only, Operating Instructions - Uconnect Phone unless otherwise authorized by Macrovision. Reverse (If Equipped) Refer to Uconnect Phone in the Uconnect User engineering or disassembly is prohibited. Manual located on the DVD for further details. DTS DTS and DTS 2.0 are trademarks of Digital TheOperating Instructions - Video Entertainment ater Systems, Inc. System (VES) (If Equipped) Refer to Video Entertainment System (VES) for furUconnect Multimedia (Satellite Radio) If ther details. Equipped Satellite radio uses direct satellite-to-receiver broadcastDolby Manufactured under license from Dolby Laboratories. ing technology to provide clear digital sound, coast to Dolby and the double-D symbol are trademarks of coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, Dolby Laboratories. sports, news, entertainment, and programming for chilMacrovision dren, directly from its satellites and broadcasting studios. This product incorporates copyright protection technology that is protected by U.S. patents and other intellec- NOTE: Sirius service is not available in Hawaii and has tual property rights. Use of this copyright protection limited coverage in Alaska. technology must be authorized by Macrovision, and is
System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents.
To access the ESN/SID, refer to the following steps: ESN/SID Access With the ignition switch in the ON/RUN or ACC position and the radio on, press the SETUP button and scroll using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen.
Selecting Uconnect Multimedia (Satellite) Mode Electronic Serial Number/Sirius Identification Press the SAT button until SAT appears in the display. A Number (ESN/SID) CD may remain in the radio while in the Satellite radio Please have the following information available when mode. calling: Satellite Antenna 1. The Electronic Serial Number/Sirius Identification To ensure optimum reception, do not place items on the Number (ESN/SID). roof around the rooftop antenna location. Metal objects placed within the line of sight of the antenna will cause 2. Your Vehicle Identification Number. decreased performance. Larger luggage items such as
bikes should be placed as far rearward as possible, within Operating Instructions - Uconnect Multimedia the loading design of the rack. Do not place items directly (Satellite) Mode on or above the antenna. NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Reception Quality Satellite reception may be interrupted due to one of the SEEK Buttons following reasons: Press and release the SEEK buttons to search for the next The vehicle is parked in an underground parking channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will structure or under a physical obstacle. remain tuned to the new channel until you make another Dense tree coverage may interrupt reception in the selection. Holding either button will bypass channels form of short audio mutes. without stopping until you release it. Driving under wide bridges or along tall buildings can SCAN Button cause intermittent reception. Pressing the SCAN button causes the tuner to search for Placing objects over or too close to the antenna can the next channel, pausing for eight seconds before concause signal blockage. tinuing to the next. To stop the search, press the SCAN button a second time.
INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if available). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display).
MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected.
Toggle the MUSIC TYPE button again to select the music RW/FF type. Pressing the RW (Rewind) or FF (Fast Forward) buttons By pressing the SEEK button when the Music Type causes the tuner to search for the next channel in the function is active, the radio will be tuned to the next direction of the arrows. channel with the same selected Music Type name. TUNE Control (Rotary) If a preset button is activated while in the Music Type Turn the rotary TUNE/SCROLL control knob clockwise (Program Type) mode, the Music Type mode will be to increase or counterclockwise to decrease the channel. exited and the radio will tune to the preset channel.
the SET button twice and SET 2 will show in the display SETUP Button Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into following items: pushbutton memory. The channels stored in SET 2 Display Sirius ID number Press the AUDIO/ memory can be selected by pressing the pushbutton SELECT button to display the Sirius ID number. This twice. number is used to activate, deactivate, or change the Every time a preset button is used, a corresponding Sirius subscription. button number will display. SET Button To Set the Pushbutton Memory When you are receiving a channel that you wish to Buttons 1 - 6 commit to pushbutton memory, press the SET button. These buttons tune the radio to the channels that you The symbol SET 1 will now show in the display window. commit to pushbutton memory (12 Satellite stations). Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ selected within five seconds after pressing the SET but- RHB) CD/DVD/HDD/NAV IF EQUIPPED ton, the channel will continue to play but will not be NOTE: The sales code is located on the lower right side stored into pushbutton memory. of the units faceplate. You may add a second channel to each pushbutton by Refer to your Uconnect Multimedia RHR, RER, RBZ or repeating the above procedure with this exception: Press RHB users manual for detailed operating instructions.
Operating Instructions (Voice Command System) If Equipped Refer to Voice Command in the Uconnect User Manual located on the DVD for further details. Operating Instructions (Uconnect Phone) If Equipped Refer to Uconnect Phone in the Uconnect User Manual located on the DVD for further details. MEDIA CENTER 130 (SALES CODE RES) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
Media Center 130 (RES)
Operating Instructions Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio. Clock Setting Procedure Electronic Volume Control 1. Press and hold the TIME button until the hours blink. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning 2. Adjust the hours by turning the right side TUNE/ the ON/VOLUME control knob to the right increases the SCROLL control knob. volume, and to the left decreases it. 3. After adjusting the hours, press the right side TUNE/ When the audio system is turned on, the sound will be SCROLL control knob to set the minutes. The minutes set at the same volume level as last played. will begin to blink. SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5. To exit, press any button/knob, or wait five seconds.
RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies.
Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display. Turn the TUNE/ TUNE Control Turn the rotary TUNE/SCROLL control knob clockwise SCROLL control knob to the right or left to adjust the to increase or counterclockwise to decrease the frequency. sound level from the right or left side speakers. Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control knob to the left or right to adjust the sound level between the front and rear speakers.
Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones. Press the buttons to select either AM or FM mode.
SET/RND Button To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/RND button, the station will continue to play but will not be stored into pushbutton memory.
Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes. Operation Instructions CD MODE For CD And MP3 Audio Play
You may add a second station to each pushbutton by repeating the above procedure with this exception: Press NOTE: the SET/RND button twice and SET 2 will show in the The ignition switch must be in the ON or ACC display window. Each button can be set for SET 1 and position to operate the radio. SET 2 in both AM and FM. This allows a total of 12 AM This radio is capable of playing compact discs (CD), and 12 FM stations to be stored into pushbutton memory. recordable compact discs (CD-R), rewritable compact The stations stored in SET 2 memory can be selected by discs (CD-RW), compact discs with MP3 tracks and pressing the pushbutton twice. multisession compact discs with CD and MP3 tracks. Every time a preset button is used, a corresponding button number will display.
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded.
Do not use adhesive labels. These labels can peel away and jam the player mechanism. The RES Media Center is a single CD player. Do not attempt to insert a second CD if one is already loaded.
If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc. The display will show the track number, and index time in minutes and If you have ejected a disc and have not removed it within seconds. Play will begin at the start of track 1. 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. CAUTION! This CD player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. (Continued) A disc can be ejected with the radio and ignition OFF. NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped).
SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes.
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next randomly selected track. Press the RND button a second time to stop Random Play.
TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 RW/FF file recording media and formats are limited. When Press and hold the FF (Fast Forward) button and the CD writing MP3 files, pay attention to the following restricplayer will begin to fast forward until FF is released, or tions. RW or another CD button is pressed. The RW (Reverse) Supported Media (Disc Types) button works in a similar manner. The MP3 file recording media supported by the radio are AM/FM Button CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. Press the button to select either AM or FM mode.
Supported Medium Formats (File Systems) Maximum number of characters in file/folder names: The medium formats supported by the radio are ISO 9660 Level 1: 12 (including a separator . and a threeLevel 1 and Level 2 and includes the Joliet extension. character extension) When reading discs recorded using formats other than Level 2: 31 (including a separator . and a threeISO 9660 Level 1 and Level 2, the radio may fail to read character extension) files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal The radio uses the following limits for file systems: CD audio tracks and computer files (including MP3 files). Maximum number of folder levels: 8 Discs created with an option such as keep disc open after Maximum number of files: 255 writing are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in Maximum number of folders. (The radio display of file longer disc loading times. names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to Supported MP3 File Formats display the file name and folder name, and will assign The radio will recognize only files with the *.MP3 extena number instead. With a maximum number of files, sion as MP3 files. Non-MP3 files named with the *.MP3 exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.)
extension may cause playback problems. The radio is ID3 Tag information for artist, song title, and album title designed to recognize the file as an invalid MP3 and will are supported for version 1 ID3 tags. ID3 version 2 is not not play the file. supported by the radios. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rate. MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: Media - CD-RW media may take longer to load than CD-R media Medium formats - Multisession discs may take longer to load than non-multisession discs
MPEG-2 Audio Layer 3
24, 22.05, 16
Number of files and folders - Loading times will Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected. increase with more files and folders To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the Disc at Once option before writing to the disc. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicles audio system to amplify the source and play through the vehicle speakers. NOTE: The AUX device must be turned on and the devices volume set to proper level. If the AUX audio is not loud enough, turn the devices volume up. If the AUX audio sounds distorted, turn the devices volume down. TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the ON/VOLUME control knob to the right increases the volume and to the left decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played. SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. Operating Instructions Radio Mode
Media Center 130 (RES/RSC)
If your vehicle is not equipped with or this feature is not Voice Command System (Radio) If Equipped Refer to Voice Command in Understanding The Fea- available on your vehicle, a Not Equipped With Uconnect Phone message will display on the radio tures Of Your Vehicle. screen. Voice Command Button Uconnect Phone If Equipped TIME Button Press this button to operate the Uconnect Phone feature Press the TIME button to alternate display of the time (if equipped). Refer to Uconnect Phone in Under- and radio frequency. standing The Features Of Your Vehicle. Clock Setting Procedure If your vehicle is not equipped with or this feature is not 1. Press and hold the TIME button until the hours blink. available on your vehicle, a Not Equipped With Uconnect Phone message will display on the radio 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. screen. Phone Button Uconnect Phone If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect Phone feature SCROLL control knob to set the minutes. The minutes (if equipped). Refer to Uconnect Phone in Under- will begin to blink. standing The Features Of Your Vehicle.
4. Adjust the minutes using the right side TUNE/ RW/FF SCROLL control knob. Press the TUNE/SCROLL control Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the knob to save time change. direction of the arrows. This feature operates in either 5. To exit, press any button/knob or wait five seconds. AM or FM frequencies. The clock can also be set by pressing the SETUP button. TUNE Control For vehicles equipped with satellite radio, press the Turn the rotary TUNE/SCROLL control knob clockwise SETUP button, use the TUNE/SCROLL control to select to increase or counterclockwise to decrease the frequency. SET CLOCK, and then follow the above procedure, starting at Step 2. For vehicles not equipped with satellite Setting the Tone, Balance, and Fade radio, press the SETUP button and then follow the above Push the rotary TUNE/SCROLL control knob and BASS will display. Turn the TUNE/SCROLL control knob to procedure, starting at Step 2. the right or left to increase or decrease the bass tones. INFO Button Press the INFO button for an RDS station (one with call Push the rotary TUNE/SCROLL control knob a second letters displayed). The radio will return a Radio Text time and MID will display. Turn the TUNE/SCROLL message broadcast from an FM station (FM mode only). control knob to the right or left to increase or decrease the mid-range tones.
Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
Push the rotary TUNE/SCROLL control knob a fourth Toggle the MUSIC TYPE button to select the following time and BALANCE will display. Turn the TUNE/ format types: SCROLL control knob to the right or left to adjust the Program Type 16-Digit Character Display sound level from the right or left side speakers. No program type or None undefined Push the rotary TUNE/SCROLL control knob a fifth time Adult Hits Adlt Hit and FADE will display. Turn the TUNE/SCROLL control knob to the left or right to adjust the sound level between Classical Classicl the front and rear speakers. Classic Rock Cls Rock College College Push the rotary TUNE/SCROLL control knob again to Country Country exit setting tone, balance, and fade. Foreign Language Language MUSIC TYPE Button Information Inform Pressing this button once will turn on the Music Type Jazz Jazz mode for five seconds. Pressing the MUSIC TYPE button
Program Type News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather
16-Digit Character Display News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Weather
By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station. SETUP Button Pressing the SETUP button allows you to select between the following items: Set Clock Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust
the minutes using the right side TUNE/SCROLL You may add a second station to each pushbutton by control knob. Press the TUNE/SCROLL control knob repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the to save time change. display window. Each button can be set for SET 1 and AM/FM Button SET 2 in both AM and FM. This allows a total of 12 AM Press the button to select either AM or FM mode. and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by SET/RND Button To Set the Pushbutton pressing the pushbutton twice. Memory When you are receiving a station that you wish to Every time a preset button is used, a corresponding commit to pushbutton memory, press the SET/RND button number will display. button. The symbol SET 1 will now show in the display window. Select the button (16) you wish to lock onto this Buttons 1 - 6 station and press and release that button. If a button is These buttons tune the radio to the stations that you not selected within five seconds after pressing the SET/ commit to pushbutton memory (12 AM and 12 FM RND button, the station will continue to play but will not stations). be stored into pushbutton memory. DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode.
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio. Operation Instructions CD MODE for CD and MP3 Audio Play This radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable compact discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks.
CAUTION!
This CD player will accept 43/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. Do not use adhesive labels. These labels can peel away and jam the player mechanism. The RES Media Center is a single CD player. Do not attempt to insert a second CD if one is already loaded.
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded. EJECT Button - Ejecting a CD Press the EJECT button to eject the CD.
If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or the radio will reinsert the CD but will not play it. another CD button is pressed. The RW (Reverse) button A disc can be ejected with the radio and ignition OFF. works in a similar manner. NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button convertible or soft-top models (if equipped). Press the button to select either AM or FM mode. SEEK Button SET/RND Button (Random Play Button) Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate CD. Press the left SEEK button to return to the beginning Random Play. This feature plays the selections on the of the current selection, or return to the beginning of the compact disc in random order to provide an interesting previous selection if the CD is within the first second of change of pace. the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in Press the right SEEK button to move to the next randomly selected track. CD and MP3 modes. TIME Button Press the SET/RND button a second time to stop RanPress this button to change the display from a large CD dom Play. playing time display to a small CD playing time display.
Notes On Playing MP3 Files Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions. display the file name and folder name and will assign Supported Media (Disc Types) a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this display.) Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Maximum number of characters in file/folder names: Level 1 and Level 2 and includes the Joliet extension. Level 1: 12 (including a separator . and a threeWhen reading discs recorded using formats other than character extension) ISO 9660 Level 1 and Level 2, the radio may fail to read Level 2: 31 (including a separator . and a threefiles properly and may be unable to play the file norcharacter extension) mally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: Maximum number of folder levels: 8 Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files).
Discs created with an option such as keep disc open after writing are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates.
MPEG Specification MPEG-1 Audio Layer 3
Sampling Frequency (kHz) 48, 44.1, 32
Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8
MPEG-2 Audio Layer 3
24, 22.05, 16
ID3 Tag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported.
LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the Loading times for playback of MP3 files may be affected next folder in sequence if the selection does not contain by the following: playable files). Media - CD-RW media may take longer to load than The folder list will time out after five seconds. CD-R media INFO Button (CD Mode for MP3 Play) Medium formats - Multisession discs may take longer Pressing the INFO button repeatedly will scroll through to load than non-multisession discs the following TAG information: Song Title, Artist, File Number of files and folders - Loading times will Name, and Folder Name (if available). increase with more files and folders Press the INFO button once more to return to elapsed To increase the speed of disc loading, it is recommended time priority mode. to use CD-R media and single-session discs. To create a Press and hold the INFO button for three seconds or single-session disc, enable the Disc at Once option more and the radio will display song titles for each file. before writing to the disc.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Press and hold the INFO button again for three seconds to return to elapsed time display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicles audio system to amplify the source and play through the vehicle speakers.
TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is OFF).
Uconnect Multimedia (Satellite Radio) If Equipped Satellite radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Pressing the AUX button will change the mode to auxilRadio. This service offers over 130 channels of music, iary device if the AUX jack is connected. sports, news, entertainment, and programming for chilNOTE: The AUX device must be turned on and the dren, directly from its satellites and broadcasting studios. devices volume set to the proper level. If the AUX audio NOTE: Sirius service is not available in Hawaii and has is not loud enough, turn the devices volume up. If the limited coverage in Alaska. AUX audio sounds distorted, turn the devices volume System Activation down. Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite
radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents.
using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen.
Selecting Uconnect Multimedia (Satellite) Mode Electronic Serial Number/Sirius Identification Press the SAT button until SAT appears in the display. A Number (ESN/SID) CD may remain in the radio while in the Satellite radio Please have the following information available when mode. calling: Satellite Antenna 1. The Electronic Serial Number/Sirius Identification To ensure optimum reception, do not place items on the roof around the rooftop antenna location. Metal objects Number (ESN/SID). placed within the line of sight of the antenna will cause 2. Your Vehicle Identification Number. decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within To access the ESN/SID, refer to the following steps: the loading design of the rack. Do not place items directly ESN/SID Access on or above the antenna. With the ignition switch in the ON/RUN or ACC position and the radio on, press the SETUP button and scroll
Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will The vehicle is parked in an underground parking remain tuned to the new channel until you make another structure or under a physical obstacle. selection. Holding either button will bypass channels Dense tree coverage may interrupt reception in the without stopping until you release it. form of short audio mutes. SCAN Button Driving under wide bridges or along tall buildings can Pressing the SCAN button causes the tuner to search for cause intermittent reception. the next channel, pausing for eight seconds before continuing to the next. To stop the search, press the SCAN Placing objects over or too close to the antenna can button a second time. cause signal blockage. INFO Button Operating Instructions - Uconnect Multimedia Pressing the INFO button will cycle the display informa(Satellite) Mode tion between Artist, Song Title, and Composer (if availNOTE: The ignition switch must be in the ON/RUN or able). Also, pressing and holding the INFO button for an ACC position to operate the radio.
additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons channel with the same selected Music Type name. causes the tuner to search for the next channel in the If a preset button is activated while in the Music Type direction of the arrows. (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset channel. TUNE Control (Rotary) Turn the rotary TUNE/SCROLL control knob clockwise SETUP Button to increase or counterclockwise to decrease the channel. Pressing the SETUP button allows you to select the MUSIC TYPE Button following items: Pressing this button once will turn on the Music Type Display Sirius ID number Press the AUDIO/ mode for five seconds. Pressing the MUSIC TYPE button SELECT button to display the Sirius ID number. This or turning the TUNE/SCROLL control knob within five number is used to activate, deactivate, or change the seconds will allow the program format type to be seSirius subscription. lected.
SET Button To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory. You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory. The channels stored in SET 2 memory can be selected by pressing the pushbutton twice.
Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions - Uconnect Phone (If Equipped) Refer to Uconnect Phone in Understanding The Features Of Your Vehicle. STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches.
Pressing the center button will make the radio switch between the various modes available (AM/FM/SAT/ CD/HDD/AUX/VES, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in. The following describes the left-hand control operation in each mode. Radio Operation Pressing the top of the switch will Seek up for the next listenable station and pressing the bottom of the switch will Seek down for the next listenable station.
Remote Sound System Controls (Back View Of Steering Wheel)
The right-hand control is a rocker-type switch with a The button located in the center of the left-hand control pushbutton in the center and controls the volume and will tune to the next preset station that you have promode of the sound system. Pressing the top of the rocker grammed in the radio preset pushbutton. switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume.
CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous track if it is within one second after the current track begins to play.
CD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface.
2. If the disc is stained, clean the surface with a soft cloth, If you press the switch up or down twice, it plays the wiping from center to edge. second track; three times, it will play the third, etc. 3. Do not apply paper or tape to the disc; avoid scratchThe center button on the left side rocker switch has no ing the disc. function for a single-disc CD player. However, when a multiple-disc CD player is equipped on the vehicle, the 4. Do not use solvents such as benzene, thinner, cleaners, center button will select the next available CD in the or anti-static sprays. player. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high.
NOTE: If you experience difficulty in playing a particu- Manual Heating And Air Conditioning lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. RADIO OPERATION AND MOBILE PHONES Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the mobile phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily clear by the repositioning of the antenna, it is recommended that the radio volume be Manual Temperature Control turned down or off during mobile phone operation when The Manual Temperature Controls consist of a series of not using Uconnect (if equipped). outer rotary dials and inner push knobs. CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather.
Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the O (OFF) position. There are seven blower speeds.
NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance.
Mode Control (Air Direction) Temperature Control Rotate this control to choose from sevRotate this control to regulate the temeral patterns of air distribution. You perature of the air inside the passenger can select either a primary mode as compartment. Rotating the dial left identified by the symbols on the coninto the blue area of the scale indicates trol, or a blend of two of these modes. cooler temperatures, while rotating The closer the setting is to a particular right into the red area indicates symbol, the more air distribution you warmer temperatures. receive from that mode.
Panel Floor Air is directed through the outlets in the instrument Air is directed through the floor outlets with a panel. These outlets can be adjusted to direct airflow. small amount flowing through the defrost and side window demist outlets. NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat Mix passengers for maximum airflow to the rear. Air is directed through the floor, defrost, and side window demist outlets. This setting works best in Bi-Level cold or snowy conditions that require extra heat to Air is directed through the panel and floor outlets. the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. NOTE: For all settings, except full cold or full hot, there is a difference in temperature between the upper and Defrost Air is directed through the windshield and side lower outlets. The warmer air flows to the floor outlets. window demist outlets. Use this mode with maxiThis feature gives improved comfort during sunny but mum blower and temperature settings for best windcool conditions. shield and side window defrosting.
NOTE: NOTE: The air conditioning compressor operates in Mix, Continuous use of the Recirculation mode may make Defrost, or a blend of these modes, even if the Air the inside air stuffy and window fogging may occur. Conditioning (A/C) button is not pressed. This dehuExtended use of this mode is not recommended. midifies the air to help dry the windshield. To improve The use of the Recirculation mode in cold or damp fuel economy, use these modes only when necessary. weather will cause windows to fog on the inside, For information on operating the Rear Defrost, refer to because of moisture buildup inside the vehicle. Select Rear Window Features in Understanding The Feathe outside air position for maximum defogging. tures Of Your Vehicle. The A/C will engage automatically to prevent fogging when the recirculation button is pressed and the mode Recirculation Control control is set to panel or panel / floor. Pressing the Recirculation Control button will put the system in recirculation mode. This can The A/C can be deselected manually without disturbbe used when outside conditions such as ing the mode control selection. smoke, odors, dust, or high humidity are present. Activating recirculation will cause the LED in the When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. control button to illuminate. After ten minutes, the system will return to normal mode function and the LED will turn off.
Air Conditioning Control Automatic Temperature Control (ATC) If Press this button to engage the Air Equipped Conditioning. A light will illuminate when the Air Conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures. NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. MAX A/C For maximum cooling use the A/C and recirculation buttons at the same time. ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.
Automatic Temperature Control
Automatic Operation The Automatic Temperature Control system automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger.
You will experience the greatest efficiency by simply allowing the system to function automatically. Selecting 1. Turn the Mode Control knob (on the right) and the the O (OFF) position on the blower control stops the Blower Control knob (on the left) to AUTO. system completely and closes the outside air intake. NOTE: The AUTO position performs best for front seat The recommended setting for maximum comfort is 72F occupants only. (22C) for the average person; however, this may vary. 2. Dial in the temperature you would NOTE: like the system to maintain by rotating The temperature setting can be adjusted at anytime the Temperature Control knob. Once without affecting automatic operation. the comfort level is selected, the system will maintain that level automati- Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button cally using the heating system. Should to flash three times and then turn off. This indicates the desired comfort level require air that the system is in AUTO mode and requesting the conditioning, the system will automatically make the air conditioning is not necessary. adjustment. Operation of the system is quite simple.
If your air conditioning performance seems lower than expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance. Blower Control
For full automatic operation or for automatic blower operation, turn the NOTE: Please read the Automatic Temperature Control knob to the AUTO position. In manual Operation Chart that follows for details. mode there are six blower speeds that can be individual selected. In off position the blower will shut off.
Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Preferred Automatic. This means the operator can override the blower, the mode, or both. There is a manual blower range for times when the AUTO setting is not desired. The blower can be set to any fixed blower speed by rotating the Blower Control knob (on the left).
The operator can override the AUTO mode setting to Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. Panel Air is directed through the outlets in the instrument Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow. window demist outlets. This setting works best in NOTE: The center instrument panel outlets can be cold or snowy conditions that require extra heat to aimed so that they are directed toward the rear seat the windshield. This setting is good for maintaining passengers for maximum airflow to the rear. comfort while reducing moisture on the windshield. Bi-Level Defrost Air is directed through the panel and floor outlets. Air is directed through the windshield and side window demist outlets. Use this mode with maxiNOTE: For all settings, except full cold or full hot, there mum blower and temperature settings for best windis a difference in temperature between the upper and shield and side window defrosting. lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditions.
Air Conditioner Control Press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn OFF the air conditioning. An LED in the button illuminates when manual compressor operation is selected. Recirculation Control The system will automatically control recirculation. However, pressing the Recirculation Control button will temporarily put the system in recirculation mode (ten minutes). This can be used when outside conditions such as smoke, odors, dust, or high humidity are present. Activating recirculation will cause the LED in the control button to illuminate. After ten minutes, the system will return to normal AUTO mode function and the LED will turn off.
NOTE: When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. In cold weather, use of the Recirculation mode may lead to excessive window fogging. The Recirculation mode is not allowed in the floor, defrost, or defrost/ floor mode in order to improve window clearing. Recirculation will be disabled automatically if these modes are selected. Extended use of recirculation may cause the windows to fog. If the interior of the windows begins to fog, press the Recirculation button to return to outside air. Some temp/humidity conditions will cause captured interior air to condense on windows and hamper visibility. For this reason, the system will not allow Recirculation to be selected while in floor, defrost, or defrost/floor mode. Attempting to use the recirculation while in these modes will cause the LED in the control button to blink and then turn off.
Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time. If you would like the system to go into Recirculation Mode, you must first move the Mode knob to Panel, Panel/Floor and then press the Recirculation button. This feature reduces the possibility of window fogging.
Summer Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A solution of 50% ethylene glycol antifreeze coolant and 50% water is recommended. Refer to Maintenance Procedures in Maintaining Your Vehicle for proper coolant selection. Winter Operation Use of the air Recirculation Mode during winter months is not recommended because it may cause window fogging.
Vacation Storage Anytime you store your vehicle, or keep it out of service Operating Tips (i.e., vacation) for two weeks or more, run the air NOTE: Refer to the chart at the end of this section for conditioning system at idle for about five minutes in the suggested control settings for various weather condi- fresh air and high blower settings. This will ensure tions. adequate system lubrication to minimize the possibility of compressor damage when the system is started again.
Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
Outside Air Intake Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In winter months, make sure the air intake is clear of ice, slush, and snow.
A/C Air Filter If Equipped NOTE: Recirculate without A/C should not be used for The A/C Filter prevents most dust and pollen from entering the cabin. The filter acts on air coming from long periods as fogging may occur. outside the vehicle and recirculated air within the pasSide Window Demisters senger compartment. Refer to Maintenance Procedures A side window demister outlet is located at each end of in Maintaining Your Vehicle for A/C Air Filter service the instrument panel. These non-adjustable outlets direct information or see your authorized dealer for service. air toward the side windows when the system is in the Refer to Maintenance Schedules for filter service FLOOR, MIX, or DEFROST mode. The air is directed at intervals. the area of the windows through which you view the outside mirrors.
Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING

CONTENTS
Starting Procedures . . . . . . . . . . . . . . . . . . . . 319 Normal Starting . . . . . . . . . . . . . . . . . . . . . 319 Extreme Cold Weather (Below 20F Or 29C) . . . . . . . . . . . . . . . . 320 If Engine Fails To Start . . . . . . . . . . . . . . . . 320 After Starting . . . . . . . . . . . . . . . . . . . . . . . 321 Engine Block Heater If Equipped . . . . . . . . 321 Key Ignition Park Interlock . . . . . . . . . . . . . 323 Brake/Transmission Shift Interlock System . . 323 FourSpeed Automatic Transmission . . . . . . . 324 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 324 Four-Wheel Drive Operation . . . . . . . . . . . . . 333 Command-Trac II Transfer Case If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 333 Selec-Trac II Transfer Case If Equipped . . . 339
Automatic Transmission . . . . . . . . . . . . . . . . . 322 On-Road Driving Tips . . . . . . . . . . . . . . . . . . 344
316 STARTING AND OPERATING
Off-Road Driving Tips . . . . . . . . . . . . . . . . . . 345 When To Use 4WD Low Range . . . . . . . . . . 345 Driving Through Water . . . . . . . . . . . . . . . . 345 Driving In Snow, Mud And Sand . . . . . . . . . 346 Hill Climbing . . . . . . . . . . . . . . . . . . . . . . . 347 Traction Downhill . . . . . . . . . . . . . . . . . . . . 348 After Driving Off-Road . . . . . . . . . . . . . . . . 348 Power Steering . . . . . . . . . . . . . . . . . . . . . . . 349 Power Steering Fluid Check . . . . . . . . . . . . . 350 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . 351 Anti-Lock Brake System . . . . . . . . . . . . . . . . . 353 Electronic Brake Control System . . . . . . . . . . . 355 Anti-Lock Brake System (ABS) . . . . . . . . . . . 356
Traction Control System (TCS) . . . . . . . . . . . 356 Brake Assist System (BAS) . . . . . . . . . . . . . . 357 Electronic Roll Mitigation (ERM) . . . . . . . . . 358 Hill Start Assist (HSA) . . . . . . . . . . . . . . . . 358 Hill Descent Control (HDC) If Equipped . . 361 Electronic Stability Control (ESC) . . . . . . . . . 363 ESC Activation/Malfunction Indicator Light And ESC Off Indicator Light . . . . . . . . . . . . 366 Tire Safety Information . . . . . . . . . . . . . . . . . 368 Tire Markings . . . . . . . . . . . . . . . . . . . . . . . 368 Tire Identification Number (TIN) . . . . . . . . . 371 Tire Terminology And Definitions . . . . . . . . . 372 Tire Loading And Tire Pressure . . . . . . . . . . 373
STARTING AND OPERATING 317
Tires General Information
. . . . . . . . . . . . . 377
Replacement Tires . . . . . . . . . . . . . . . . . . . . 385 Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Tire Rotation Recommendations . . . . . . . . . . . 388 Tire Pressure Monitor System (TPMS) . . . . . . . 389 Base System . . . . . . . . . . . . . . . . . . . . . . . . 391 Premium System If Equipped . . . . . . . . . . 394 General Information . . . . . . . . . . . . . . . . . . 399 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . 399 Reformulated Gasoline . . . . . . . . . . . . . . . . 400 Gasoline/Oxygenate Blends . . . . . . . . . . . . . 400 E-85 Usage In Non-Flex Fuel Vehicles . . . . . . 401 MMT In Gasoline . . . . . . . . . . . . . . . . . . . . 401 Materials Added To Fuel . . . . . . . . . . . . . . . 402
Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 377 Tire Inflation Pressures . . . . . . . . . . . . . . . . 378 Tire Pressures For High Speed Operation . . . 380 Radial-Ply Tires . . . . . . . . . . . . . . . . . . . . . 380 Spare Tire Matching Original Equipped Tire And Wheel If Equipped . . . . . . . . . . . . . . 380 Compact Spare Tire If Equipped . . . . . . . . 381 Full Size Spare If Equipped . . . . . . . . . . . . 382 Limited-Use Spare If Equipped . . . . . . . . . 382 Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . 383 Tread Wear Indicators . . . . . . . . . . . . . . . . . 384 Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . 384
Fuel System Cautions . . . . . . . . . . . . . . . . . 402 Carbon Monoxide Warnings . . . . . . . . . . . . 403 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 404 Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 404 Loose Fuel Filler Cap Message . . . . . . . . . . . 406 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . 406 Certification Label . . . . . . . . . . . . . . . . . . . 406 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 409 Common Towing Definitions . . . . . . . . . . . . 409 Trailer Hitch Classification . . . . . . . . . . . . . . 414 Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . 415
Trailer And Tongue Weight . . . . . . . . . . . . . 417 Towing Requirements . . . . . . . . . . . . . . . . . 418 Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . 423 Recreational Towing (Behind Motorhome, Etc.) . . . . . . . . . . . . . . . . 424 Towing This Vehicle Behind Another Vehicle . . . . . . . . . . . . . . . . . . . . . 424 Recreational Towing Two-Wheel Drive Models . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 Recreational Towing Four-Wheel Drive Models . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts.
Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle. Start the engine with the shift lever in the NEUTRAL or PARK position. Apply the brake before shifting to any driving range. Normal Starting NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal.
WARNING!
When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. Do not leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle. (Continued)
Turn the ignition switch to the START position and If Engine Fails To Start release when the engine starts. If the engine fails to start WARNING! within 10 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the Normal Never pour fuel or other flammable liquids into Starting procedure. the throttle body air inlet opening in an attempt to Tip Start Feature start the vehicle. This could result in a flash fire Turn the ignition switch to START position and release it causing serious personal injury. as soon as the starter engages. The starter motor will Do not attempt to push or tow your vehicle to get it continue to run, but will automatically disengage itself started. Vehicles equipped with an automatic transwhen the engine is running. If the engine fails to start, the mission cannot be started this way. Unburned fuel starter will disengage automatically in 10 seconds. If this could enter the catalytic converter and once the occurs, turn the ignition switch to the LOCK position, engine has started, ignite and damage the converter wait 10 to 15 seconds, then repeat the Normal Starting and vehicle. If the vehicle has a discharged battery, procedure. booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. Extreme Cold Weather (below 20F or 29C) This type of start can be dangerous if done impropTo ensure reliable starting at these temperatures, use of erly. Refer to Jump Starting in What To Do In an externally powered electric engine block heater (availEmergencies for further information. able from your authorized dealer) is recommended.
With Tip Start If the engine fails to start after you have followed the Normal Starting or Extreme Cold Weather procedures, it may be flooded. To clear any excess fuel, press the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the Normal Starting procedure.
ENGINE BLOCK HEATER IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded three-wire extension cord. The engine block heater cord is found under the hood clipped to the heater line on the left side of the engine. The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine.
WARNING! CAUTION!
To prevent damage to the starter, wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt AC electrical cord could cause electrocution.
AUTOMATIC TRANSMISSION
WARNING!
Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the ignition key. Once the key is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement. When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. (Continued)
CAUTION!
Damage to the transmission may occur if the following precautions are not observed: Shift into PARK only after the vehicle has come to a complete stop. Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. Before shifting into any gear, make sure your foot is firmly pressing the brake pedal.
Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal.
Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key can only be removed from the ignition when the ignition is in the LOCK/OFF position. Once the key is removed, the shift lever is locked in PARK. Brake/Transmission Shift Interlock System This vehicle is equipped with a Brake Transmission Shift Interlock (BTSI) that holds the shift lever in the PARK position unless the brakes are applied. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON/RUN or START position (engine running or not) and the brake pedal must be pressed.
FourSpeed Automatic Transmission The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of the PARK position (refer to Brake/Transmission Shift Interlock System in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position. The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
Shift Lever
Gear Ranges Shifting from DRIVE to PARK or REVERSE should be DO NOT race the engine when shifting from PARK or done only after the accelerator pedal is released and the NEUTRAL into another gear range. vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears.
PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake. When parking on a hill, apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
WARNING!
Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever rearward (with the brake pedal released) after you have placed it in PARK. Make sure the transmission is in PARK before leaving the vehicle. (Continued)
It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal. (Continued)
Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the ignition key. Once the key is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement. When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. (Continued)
Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. The following indicators should be used to ensure that you have engaged the shift lever into the PARK position: When shifting into PARK, move the shift lever all the way forward and to the left until it stops and is fully seated. Look at the shift lever position display and verify that it indicates the PARK position. With brake pedal released, verify that the shift lever will not move out of PARK.
CAUTION!
Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. (Continued)
REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL Use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Set the parking brake and shift the transmission into PARK if you must leave the vehicle.
CAUTION!
Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage. Refer to Recreational Towing in Starting And Operating and Towing A Disabled Vehicle in What To Do In Emergencies for further information. DRIVE This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy. The transmission automatically upshifts through all forward gears. The DRIVE position provides optimum driving characteristics under all normal operating conditions.
WARNING!
Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision.
During cold temperatures, transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maximum efficiency. Engagement of the torque converter clutch is inhibited until the transmission fluid is warm (refer to the Note under Torque Converter Clutch in this section). During extremely cold temperatures (-16F [-27C] or below), operation may briefly be If the transmission operating temperature exceeds norlimited to second gear only. Normal operation will remal operating limits, the powertrain controller will sume once the transmission temperature has risen to a modify the transmission shift schedule and expand the suitable level. range of torque converter clutch engagement. This is done to prevent transmission damage due to overheat- 2 (Second) This range is used for moderate grades and to assist ing. braking on dry pavement or in mud and snow. Begins at If the transmission becomes extremely hot, the Transa stop in low gear with automatic upshift into second mission Temperature Warning Light may illuminate and gear. Will not shift into third gear. the transmission may downshift out of Overdrive until the transmission cools down. When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading conditions, in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the TOW/HAUL mode, or select the 2 range at lower speeds. Under these conditions, using TOW/HAUL mode or the 2 range will improve performance and extend transmission life by reducing excessive shifting and heat buildup.
1 (First) This range is used for hard pulling at low speeds in mud, sand, snow, or on steep grades. Begins and stays in low gear with no upshift. Provides engine compression braking at low speeds. Transmission Limp Home Mode Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission remains in second gear regardless of which forward gear is selected. PARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission.
In the event of a momentary problem, the transmission can be reset to regain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift the transmission into PARK. 3. Turn the ignition switch to the LOCK/OFF position. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Shift into the desired gear range. If the problem is no longer detected, the transmission will return to normal operation. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
If the transmission cannot be reset, authorized dealer vehicle speed is sufficiently high, service is required. the driver is not heavily pressing the accelerator, and Overdrive Operation the TOW/HAUL button has not been activated. The automatic transmission includes an electronically controlled Overdrive (fourth gear). The transmission will When To Use TOW/HAUL Mode automatically shift into the Overdrive gear if the follow- When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting ocing conditions are present: curs, press the TOW/HAUL switch to select TOW/ the shift lever is in the DRIVE position, HAUL mode. This will improve performance and reduce the transmission fluid has reached an adequate tem- the potential for transmission overheating or failure due perature, to excessive shifting. When operating in TOW/HAUL mode, the transmission will downshift into third gear. the engine coolant has reached an adequate temperature,
NOTE: TOW/HAUL mode locks out Overdrive.
Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears. When the vehicle speed drops or during some accelerations, the clutch automatically disengages. NOTE: The torque converter clutch will not engage until the transmission fluid and engine coolant are warm [usually after 1 to 3 miles (1.6 to 4.8 km) of driving]. Because the engine speed is higher when the torque converter clutch is not engaged, it may seem as if the transmission is not shifting into Overdrive when cold. This is normal. Pressing the TOW/HAUL switch, when the transmission is sufficiently warm, will demonstrate that the transmission is able to shift into and out of Overdrive.
Tow/Haul Button
The TOW/HAUL Indicator Light will illuminate in the instrument cluster to indicate that TOW/HAUL mode has been activated. Pressing the switch a second time restores normal operation. If the TOW/HAUL mode is desired, the switch must be pressed each time the engine is started.
FOUR-WHEEL DRIVE OPERATION Command-Trac II Transfer Case If Equipped
position locks the front driveshaft and rear driveshaft together and forces the front and rear wheels to rotate at the same speed.
Operating Information And Precautions Use the transfer case NEUTRAL position for recreational The Command-Trac II transfer case provides four positowing only. Refer to Recreational Towing in Starting tions: and Operating for further information. Twowheel drive (2WD) high range Four-wheel drive (4WD LOCK) high range Four-wheel drive (4WD LOW) low range Neutral (N) This transfer case is intended to be driven in the twowheel drive position (2WD) for normal street and highway conditions such as dry hard-surfaced roads. When additional traction is required, select the transfer case 4WD LOCK position or 4WD LOW position. This
CAUTION!
Do not attempt to make a shift while only the front wheels or rear wheels are spinning. The MP1522 Command-Trac transfer case is not equipped with a synchronizer and therefore the speed of the front driveshaft and rear driveshaft must be equal for the shift to take place. Shifting while only the front wheels or rear wheels are spinning can cause damage to the transfer case. (Continued)
The 4WD LOCK position and 4WD LOW position are intended for loose or slippery road surfaces only. Driving in these positions on dry hardsurfaced roads may cause increased tire wear and damage to the driveline components. When operating your vehicle in 4WD LOW, the engine speed is approximately three times that of the 2WD position or 4WD LOCK position at a given road speed. Take care not to over-speed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type, and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear.
WARNING!
You or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL position without first fully engaging the parking brake. The transfer case NEUTRAL position disengages both the front driveshaft and rear driveshaft from the powertrain and it will allow the vehicle to move even if the transmission is in PARK. The parking brake should always be applied when the driver is not in the vehicle. Always engage the parking brake when powering down the vehicle if the SERV 4WD Warning Light is illuminated. Not engaging the parking brake may allow the vehicle to roll, which may cause personal injury. (Continued)
Since four-wheel drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit. You or others could be injured. Shift Positions The transfer case switch is located on the center console next to the shift lever.
5
Transfer Case Switch
2WD Rear Wheel Drive High Range - This range is used for normal street and highway driving on dry hard-surfaced roads.
4WD Lock Four-Wheel Drive High Range - This range locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction for loose or slippery road surfaces only.
Transfer Case Position Indicator Lights The four-wheel drive indicator lights (4WD and 4 LOW) are located in the instrument cluster. The NEUTRAL indicator light is located on the transfer case switch. If there is no indicator light on or flashing, the transfer case position is two-wheel drive (2WD). If the indicator light 4WD Low is on, the desired position (4WD LOCK, 4WD LOW, or Four-Wheel Drive Low Range - This range provides low NEUTRAL) has been obtained. speed four-wheel drive. Locks the front driveshaft and rear driveshaft together forcing the front and rear wheels If One Or More Shift Requirements Are Not Met: to rotate at the same speed. Additional traction and An indicator light will flash. maximum pulling power for loose or slippery road The transfer case will not shift. surfaces only. Do not exceed 25 mph (40 km/h). N Neutral - This range disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to Recreational Towing in Starting and Operating for further information. NOTE: The SERV 4WD Warning Light monitors the electric shift four-wheel drive system. If this light remains on after engine start up, or it illuminates during driving, it means that the four-wheel drive system is not functioning properly and that service is required.
Shifting Procedures NOTE: If any of the requirements to select a new transfer case position have not been met, the transfer case will not shift, the indicator light for the previous position will remain on, and the newly selected position indicator light will continue to flash until all the requirements for the selected position have been met. To retry a shift, move the transfer case switch back to the original position, make certain all shift requirements have been met, wait five seconds, and try the shift again. 2WD To 4WD Lock Move the transfer case switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped or in motion. With the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after moving the transfer case switch. If the vehicle is stopped, the ignition switch must be in the ON position with the
engine either OFF or RUNNING. This shift cannot be completed if the ignition switch is in the ACC position. NOTE: The four-wheel drive system will not allow shifts between 2WD and 4WD LOCK if the rear wheels are spinning (no traction). In this situation, the selected position indicator light will flash and the original position indicator light will remain ON. At this time, reduce speed and stop spinning the wheels to complete the shift. There may be a delay up to 10 seconds for the shift to complete after the wheels have stopped spinning. Delayed shifting out of 4WD LOCK may be experienced due to uneven tire wear, low tire pressure, or excessive loading. 4WD Lock To 4WD Low When shifting into or out of 4WD LOW, some gear noise may be heard. This noise is normal and is not detrimental to the vehicle or its occupants.
Shifting can be performed with the vehicle rolling 2 to 3. Move the transfer case switch to the desired position. 3 mph (3 to 5 km/h) using the Preferred Procedure or 4. After the desired position indicator light is on (not completely stopped using the Alternate Procedure. flashing), shift the transmission into gear. Preferred Procedure NOTE: Steps 1 and 2 in the Preferred Procedure and 1. With the engine RUNNING, slow the vehicle speed to the Alternate Procedure are requirements for shifting the transfer case. If these requirements are not met prior 2 to 3 mph (3 to 5 km/h). to attempting the shift or while the shift attempt is in 2. Shift the transmission into NEUTRAL. process, then the indicator light will flash, and the 3. While still rolling, move the transfer case switch to the current transfer case position will be maintained. To retry a shift, move the transfer case switch back to the original desired position. position, make certain all shift requirements have been 4. After the desired position indicator light is ON (not met, wait five seconds, and try the shift again. flashing), shift the transmission into gear. The ignition switch must be in the ON position for a shift Alternate Procedure to take place and for the position indicator lights to be 1. Bring the vehicle to a complete stop. operable. If the ignition switch is not in the ON position, 2. With the ignition switch in the ON position, and the then the shift will not take place and no position indicator engine OFF or RUNNING, shift the transmission into lights will be on or flashing. NEUTRAL.
Selec-Trac II Transfer Case If Equipped
For added capability when traversing steep grades, rough terrain, or extremely poor traction surfaces, select Operating Information And Precautions the transfer case 4WD LOW position. This position locks The Selec-Trac II active on-demand transfer case prothe front driveshaft and rear driveshaft together and vides four positions: forces the front and rear wheels to rotate at the same speed while multiplying engine torque. Two-wheel drive (2WD) high range Four-wheel drive Auto (4WD AUTO) high range Neutral (N) Four-wheel drive (4WD LOW) low range This transfer case is intended to be driven in either the two-wheel drive position (2WD) or the four-wheel drive Auto position (4WD AUTO) for normal street and highway conditions such as dry hard-surfaced roads. Use the transfer case NEUTRAL position for recreational towing only. Refer to Recreational Towing in Starting and Operating for further information.
CAUTION!
The 4WD LOW position is intended for loose or slippery road surfaces only. Driving in this position on dry hard-surfaced roads may cause increased tire wear and damage to the driveline components. (Continued)
When operating your vehicle in 4WD LOW, the engine speed is approximately three times that of the 2WD position or 4WD AUTO position at a given road speed. Take care not to over-speed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type, and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear.
WARNING!
You or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL position without first fully engaging the parking brake. The transfer case NEUTRAL position disengages both the front driveshaft and rear driveshaft from the powertrain and it will allow the vehicle to move despite the transmission position. The parking brake should always be applied when the driver is not in the vehicle. Always engage the parking brake when powering down the vehicle if the SERV 4WD Warning Light is illuminated. Not engaging the parking brake may allow the vehicle to roll, which may cause personal injury. (Continued)
Since four-wheel drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit. You or others could be injured. Shift Positions The transfer case switch is located on the center console next to the shift lever.
5
Transfer Case Switch
2WD Rear Wheel Drive High Range - This range is for normal street and highway driving on dry hard-surfaced roads.
4WD Auto Four-Wheel Drive Auto High Range This active ondemand range makes available optimum traction for a wide range of conditions, while maximizing driver convenience. This position is always in four-wheel drive mode, with a normal 42% front axle, 58% rear axle torque split. The system also anticipates and prevents slip by redirecting torque as necessary, up to 100% to the front or rear axle, if needed.
N Neutral - This range disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to Recreational Towing in Starting and Operating for further information. Transfer Case Position Indicator Lights The four-wheel drive indicator lights (4WD, 4 LOW) are located in the instrument cluster. The NEUTRAL indicator light is located on the transfer case switch. If there is no indicator light on or flashing, the transfer case position is two-wheel drive (2WD). If the indicator light is on, the desired position (4WD AUTO, 4WD LOW, or NEUTRAL) has been obtained.
4WD Low Four-Wheel Drive Low Range - This range is for low speed four-wheel drive. Locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose or slippery road If One Or More Shift Requirements Are Not Met: surfaces only. Do not exceed 25 mph (40 km/h). An indicator light will flash. The transfer case will not shift.
NOTE: The SERV 4WD Warning Light monitors the electric shift four-wheel drive system. If this light remains on after engine start up, or it illuminates during driving, it means that the four-wheel drive system is not functioning properly and that service is required. Shifting Procedures
vehicle stopped or in motion. If the vehicle is stopped, the ignition switch must be in the ON position with the engine either OFF or RUNNING. This shift cannot be completed if the ignition switch is in the ACC position.
2WD Or 4WD Auto To 4WD Low When shifting into or out of 4WD LOW, some gear noise may be heard. This noise is normal and is not detrimental NOTE: If any of the requirements to select a new to the vehicle or its occupants. transfer case position have not been met, the transfer case will not shift, the indicator light for the previous position Shifting can be performed with the vehicle rolling 2 to will remain on, and the newly selected position indicator 3 mph (3 to 5 km/h) using the Preferred Procedure or light will continue to flash until all the requirements for completely stopped using the Alternate Procedure. the selected position have been met. To retry a shift, move Preferred Procedure the transfer case switch back to the original position, make certain all shift requirements have been met, wait 1. With the engine RUNNING, slow the vehicle speed to five seconds, and try the shift again. 2 to 3 mph (3 to 5 km/h). 2WD To 4WD Auto 2. Shift the transmission into NEUTRAL. Move the transfer case switch to the desired position. Shifts between 2WD and 4WD Auto can be done with the
3. While still rolling, move the transfer case switch to the process, then the indicator light will flash, and the desired position. current transfer case position will be maintained. To retry a shift, move the transfer case switch back to the original 4. After the desired position indicator light is on (not position, make certain all shift requirements have been flashing), shift the transmission into gear. met, wait five seconds, and try the shift again. Alternate Procedure The ignition switch must be in the ON position for a shift 1. Bring the vehicle to a complete stop. to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, 2. With the ignition switch in the ON position and the the shift will not take place, and no position indicator engine OFF or RUNNING, shift the transmission into lights will be on or flashing. NEUTRAL. 3. Move the transfer case switch to the desired position. ON-ROAD DRIVING TIPS Utility vehicles have higher ground clearance and a 4. After the desired position indicator light is on (not narrower track to make them capable of performing in a flashing), shift the transmission into gear. wide variety of off-road applications. Specific design NOTE: Steps 1 and 2 in the Preferred Procedure and characteristics give them a higher center of gravity than the Alternate Procedure are requirements for shifting ordinary cars. the transfer case. If these requirements are not met prior An advantage of the higher ground clearance is a better to attempting the shift or while the shift attempt is in view of the road, allowing you to anticipate problems.
They are not designed for cornering at the same speeds as CAUTION! conventional two-wheel drive vehicles any more than low-slung sports cars are designed to perform satisfacto- Do not use 4WD LOW range when operating the rily in off-road conditions. If at all possible, avoid sharp vehicle on dry pavement. Driveline hardware damturns or abrupt maneuvers. As with other vehicles of this age can result. type, failure to operate this vehicle correctly may result in loss of control or vehicle rollover. Driving Through Water Although your vehicle is capable of driving through OFF-ROAD DRIVING TIPS water, there are a number of precautions that must be considered before entering the water: When To Use 4WD LOW Range When off-road driving, shift to 4WD LOW for additional CAUTION! traction and control on slippery or difficult terrain, ascending or descending steep hills, and to increase When driving through water, do not exceed 5 mph low-speed pulling power. This range should be limited to (8 km/h). Always check water depth before entering extreme situations such as deep snow, mud, or sand as a precaution, and check all fluids afterward. Drivwhere additional low speed pulling power is needed. ing through water may cause damage that may not be Vehicle speeds in excess of 25 mph (40 km/h) should be covered by the New Vehicle Limited Warranty. avoided when in 4WD LOW range.
Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. If you must drive through water, try to determine the depth and the bottom condition (and location of any obstacles) prior to entering. Proceed with caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water to minimize wave effects.
Standing Water Avoid driving in standing water deeper than 20 in (51 cm), and reduce speed appropriately to minimize wave effects. Maximum speed in 20 in (51 cm) of water is less than 5 mph (8 km/h).
Maintenance After driving through deep water, inspect your vehicle fluids and lubricants (engine, transmission, axle, transfer case) to assure they have not been contaminated. ConFlowing Water If the water is swift flowing and rising (as in storm taminated fluids and lubricants (milky, foamy in appearrun-off) avoid crossing until the water level recedes ance) should be flushed/changed as soon as possible to and/or the flow rate is reduced. If you must cross prevent component damage. flowing-water, avoid depths in excess of 9 in (22 cm). The Driving In Snow, Mud And Sand flowing water can erode the streambed causing your In heavy snow, when pulling a load, or for additional vehicle to sink into deeper water. Determine exit point(s) control at slower speeds, shift the transmission to a low that are downstream of your entry point to allow for gear and shift the transfer case to 4WD LOW if necessary. drifting. Refer to Four-Wheel Drive Operation in Starting and Operating for further information. Do not shift to a
lower gear than necessary to maintain headway. Over- speed. If the brakes are required to control vehicle speed, revving the engine can spin the wheels and traction will apply them lightly and avoid locking or skidding the tires. be lost. Avoid abrupt downshifts on icy or slippery roads because engine braking may cause skidding and loss of control. Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side.
WARNING!
If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle. Always back straight down a hill in REVERSE gear carefully. Never back down a hill in NEUTRAL using only the brake.
Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4WD LOW. Use Remember, never drive diagonally across a hill - drive first gear and 4WD LOW for very steep hills. straight up or down. If you stall or begin to lose headway while climbing a If the wheels start to slip as you approach the crest of a steep hill, allow your vehicle to come to a stop and hill, ease off the accelerator and maintain headway by immediately apply the brakes. Restart the engine and shift to REVERSE. Back slowly down the hill allowing the compression braking of the engine to help regulate your
turning the front wheels slowly left and right. This may always a good idea to check for damage. That way you provide a fresh bite into the surface and will usually can get any problems taken care of right away and have your vehicle ready when you need it. provide traction to complete the climb. Traction Downhill Completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and Shift the transmission into a low gear and the transfer case to 4WD LOW range. Let the vehicle go slowly down exhaust system for damage. the hill with all four wheels turning against engine Inspect the radiator for mud and debris and clean as compression drag. This will permit you to control the required. vehicle speed and direction. Check threaded fasteners for looseness, particularly on When descending mountains or hills, repeated braking the chassis, drivetrain components, steering, and suscan cause brake fade with loss of braking control. Avoid pension. Retighten them, if required, and torque to the repeated heavy braking by downshifting the transmisvalues specified in the Service Manual. sion whenever possible. Check for accumulations of plants or brush. These After Driving Off-Road things could be a fire hazard. They might hide damage Off-road operation puts more stress on your vehicle than to fuel lines, brake hoses, axle pinion seals, and does most on-road driving. After going off-road, it is propeller shafts.
After extended operation in mud, sand, water, or similar dirty conditions, have the radiator, fan, brake rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible.
POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
WARNING!
Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might not have full braking power when you need it to prevent a collision. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary.
NOTE: Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that If you experience unusual vibration after driving in there is a problem with the power steering system. mud, slush or similar conditions, check the wheels for impacted material. Impacted material can cause a Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. wheel imbalance and freeing the wheels of it will This is due to the cold, thick fluid in the steering correct the situation.
system. This noise should be considered normal, and it checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticidoes not in any way damage the steering system. pated. Coordinate inspection efforts through an authoWARNING! rized dealer. Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
CAUTION!
Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New Vehicle Limited Warranty.
CAUTION!
Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be
WARNING!
Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturers recommended power steering fluid.
If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave the transmission in PARK. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as Parking Brake possible. To release the parking brake, pull the lever up When the parking brake is applied with the ignition slightly, press the center button, then lower the lever switch ON, the Brake Warning Light in the instrument completely. cluster will illuminate.
NOTE: When the parking brake is applied and the transmission is placed in gear, the Brake Warning Light will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. This light only shows that the parking brake is applied. It does not show the degree of brake application. When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle.
WARNING!
Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. (Continued)
Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision. Always fully apply the parking brake when leaving your vehicle or it may roll and cause damage or injury. Also, be certain to leave the transmission in PARK. Failure to do so may cause the vehicle to roll and cause damage or injury.
ANTI-LOCK BRAKE SYSTEM The Anti-Lock Brake System (ABS) is designed to aid the driver in maintaining vehicle control under adverse braking conditions. The system operates with a separate computer to modulate hydraulic pressure, to prevent wheel lock-up and help avoid skidding on slippery surfaces. All vehicle wheels and tires must be the same size and type, and tires must be properly inflated, to produce accurate signals for the computer.
CAUTION!
If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
WARNING!
Significant over or under-inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness.
The ABS conducts a low-speed self-test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement. The movement can be more apparent on ice and snow. This is normal. The ABS pump motor runs during the self-test at 12 mph (20 km/h) and during an ABS stop. The pump motor makes a low humming noise during operation, which is normal.
The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. The ABS cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. The capabilities of an ABS equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the users safety or the safety of others.
WARNING!
Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop. (Continued)
CAUTION!
The ABS is subject to possible detrimental effects of electronic interference caused by improperly installed aftermarket radios or telephones. NOTE: During severe braking conditions, a pulsing sensation may occur and a clicking noise will be heard. This is normal, indicating that the ABS is functioning.
Engines may idle at higher speeds during warm-up, which could cause rear wheels to spin and result in loss of vehicle control. Be especially careful while driving on slippery roads, in close-quarter maneuvering, parking, or stopping.
Do not drive too fast for road conditions, especially when roads are wet or slushy. A wedge of water can build up between the tire tread and the road. This hydroplaning action can cause loss of traction, braking ability, and control. Do not ride the brakes by resting your foot on the pedal. This could overheat the brakes and result in After going through deep water or a car wash, brakes unpredictable braking action, longer stopping dismay become wet, resulting in decreased performance tances, or brake damage. and unpredictable braking action. Dry the brakes by gentle, intermittent pedal action while driving at very When descending mountains or hills, repeated brakslow speeds. ing can cause brake fade with loss of braking control. Avoid repeated heavy braking by downshifting the transmission or locking out overdrive whenever pos- ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic sible. brake control system commonly referred to as ESC. This
system includes Anti-Lock Brake System (ABS), Traction Control System (TCS), Brake Assist System (BAS), Hill Start Assist (HSA), Electronic Roll Mitigation (ERM), and Electronic Stability Control (ESC). These systems work together to enhance both vehicle stability and control in various driving conditions. Two additional electronic brake control system options are Hill Descent Control (HDC) and Trailer Sway Control (TSC). Your vehicle may be equipped with one or both of these options. Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lock-up to help avoid skidding on slippery surfaces during braking. Refer to Anti-Lock Brake System in Starting and Operating for further information.
WARNING!
The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the users safety or the safety of others. Traction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS system functions similar to
a limited slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if TCS and ESC are in the Partial Off mode or the Full Off mode. Refer to Electronic Stability Control (ESC) in this section for further information. Brake Assist System (BAS) The BAS is designed to optimize the vehicles braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the anti-lock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance. To receive the
benefit of the system, you must apply continuous braking pressure during the stopping sequence, (do not pump the brakes). Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the BAS is deactivated.
WARNING!
The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the users safety or the safety of others.
Electronic Roll Mitigation (ERM) WARNING! This system anticipates the potential for wheel lift by monitoring the drivers steering wheel input and the Many factors, such as vehicle loading, road condispeed of the vehicle. When ERM determines that the rate tions, and driving conditions, influence the chance of change of the steering wheel angle and vehicles speed that wheel lift or rollover may occur. Electronic Roll are sufficient to potentially cause wheel lift, it then Mitigation (ERM) cannot prevent all wheel lift or applies the appropriate brake and may also reduce rollovers, especially those that involve leaving the engine power to lessen the chance that wheel lift will roadway or striking objects or other vehicles. The occur. ERM will only intervene during very severe or capabilities of an ERM-equipped vehicle must never evasive driving maneuvers. ERM can only reduce the be exploited in a reckless or dangerous manner, chance of wheel lift occurring during severe or evasive which could jeopardize the users safety or the safety driving maneuvers. It cannot prevent wheel lift due to of others. other factors, such as road conditions, leaving the roadway, or striking objects or other vehicles. Hill Start Assist (HSA) The HSA system is designed to help the driver accelerate NOTE: ERM is disabled anytime the ESC is in Full Off the vehicle from a complete stop while on an incline. If mode. Refer to Electronic Stability Control (ESC) for a the driver releases the brake while stopped on an incline, complete explanation of the available ESC modes. HSA will continue to hold the brake pressure for a short period. If the driver does not apply the throttle before this
time expires, the system will release brake pressure and the vehicle will roll down the hill as normal. The system will release brake pressure in proportion to amount of throttle applied. The following conditions must be met in order for HSA to activate: The vehicle must be stopped. The vehicle must be on a 7% or greater incline. The gear selection must match vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle backing uphill is in REVERSE gear).
WARNING!
There may be situations where the Hill Start Assist (HSA) will not activate and slight rolling may occur, such as on minor hills (i.e., less than 7%), or with a loaded vehicle, or while pulling a trailer. HSA is not a substitute for active driving involvement. It is always the drivers responsibility to be attentive to distance to other vehicles, people, and objects, and most importantly brake operation to ensure safe operation of the vehicle under all road conditions. Your complete attention is always required while driving to maintain safe control of your vehicle. Failure to follow these warnings can result in a collision or serious personal injury.
For vehicles equipped with an automatic transmission, the HSA will work in REVERSE gear and all forward gears. The system will not activate if the transmission Towing With HSA is in PARK. HSA will provide assistance during acceleration on an incline while towing a trailer.
WARNING!
If you use a trailer brake controller with your trailer, the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released. In order to avoid rolling down an incline while resuming acceleration, manually activate the trailer brake or apply more vehicle brake pressure prior to releasing the brake pedal. HSA is not a parking brake. Always apply the parking brake fully when leaving your vehicle. Also, be certain to leave the transmission in PARK. Failure to follow these warnings can result in a collision or serious personal injury.
Disabling And Enabling HSA This feature can be turned on or turned off. To change the current setting, proceed as follows: For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to Hill Start Assist, under Personal Settings (Customer Programmable Features), under Electronic Vehicle Information Center (EVIC) in Understanding Your Instrument Panel for further information. For vehicles not equipped with the EVIC, perform the following steps: NOTE: You must complete Steps 1 through 8 within 90 seconds. 1. Center the steering wheel (front wheels pointing straight forward). 2. Shift the transmission into PARK.
3. Apply the parking brake. 4. Start the engine. 5. Rotate the steering wheel one-half turn to the left.
6. Press the ESC Off button located in the lower switch bank below the climate control four times within twenty When enabled, HDC senses the terrain and activates seconds. The ESC Off Indicator Light should turn on when the vehicle is descending a hill. HDC speed may be adjusted by the driver to suit the driving conditions. The and turn off two times. speed corresponds to the transmission gear selected. 7. Rotate the steering wheel back to center and then an Gear Approximate HDC Set additional one-half turn to the right. Speed 8. Turn the ignition switch to the OFF position and then 1st 1 mph (1.5 km/h) back to the ON position. If the sequence was completed 2nd 3 mph (4.5 km/h) properly, the ESC Off Indicator Light will blink several DRIVE 7.5 mph (12 km/h) times to confirm HSA is disabled. REVERSE 1 mph (1.5 km/h) 9. Repeat these steps if you want to return this feature to NEUTRAL 3 mph (4.5 km/h) its previous setting. However, the driver can override HDC operation by applying the brake to slow the vehicle down below the
Hill Descent Control (HDC) If Equipped HDC is only intended for low speed off-road driving. HDC maintains vehicle speed while descending hills in off-road driving conditions by applying the brakes when necessary.
HDC control speed. If more speed is desired during HDC The Hill Descent button is located in the lower switch control, the accelerator pedal will increase vehicle speed bank below the climate control. in the usual manner. When either the brake or the accelerator is released, HDC will control the vehicle at the original set speed. NOTE: HDC is available on vehicles equipped with the MP1522 transfer case. The transfer case must be in 4WD LOW range to enable HDC. HDC is enabled only when the Hill Descent Control Indicator Light in the instrument cluster is on solid. HDC will NOT activate when the automatic transmission is in PARK. HDC will NOT activate on level ground. Enabling HDC
Hill Descent Button
HDC will NOT activate at vehicle speeds above 1. Shift the transfer case into 4WD LOW range. Refer to Four-Wheel Drive Operation in Starting and Operat30 mph (50 km/h). ing for further information.
2. Press the Hill Descent button. The Hill Descent counteracting the oversteer or understeer condition. EnControl Indicator Light in the instrument cluster will gine power may also be reduced to help the vehicle maintain the desired path. turn on solid. NOTE: If the transfer case is not in 4WD LOW range, ESC uses sensors in the vehicle to determine the vehicle the Hill Descent Control Indicator Light will flash for path intended by the driver and compares it to the actual path of the vehicle. When the actual path does not match five seconds and HDC will not be enabled. the intended path, ESC applies the brake of the approDisabling HDC priate wheel to assist in counteracting the oversteer or 1. Press the Hill Descent button or shift the transfer understeer condition. case out of 4WD LOW range. The Hill Descent Control Oversteer - when the vehicle is turning more than Indicator light in the instrument cluster will turn off. appropriate for the steering wheel position. Electronic Stability Control (ESC) Understeer - when the vehicle is turning less than appropriate for the steering wheel position. This system enhances directional control and stability of the vehicle under various driving conditions. ESC corThe ESC Activation/Malfunction Indicator Light lorects for oversteering or understeering of the vehicle by cated in the instrument cluster will start to flash as soon applying the brake of the appropriate wheel to assist in as the tires lose traction and the ESC system becomes active. The ESC Activation/Malfunction Indicator
Light also flashes when the TCS is active. If the ESC Activation/Malfunction Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
ESC Operating Modes Depending upon model and mode of operation, the ESC system has up to three operating modes: ESC On Partial Off, and Full Off. ESC On Two-Wheel Drive Vehicles And Four-Wheel Drive Vehicles In 2WD And 4WD High Range This is the normal operating mode for ESC when operating a two-wheel drive vehicle. It is also the normal mode for operating a four-wheel drive vehicle in 2WD or 4WD HIGH range. The ESC system will be in ESC On mode whenever the vehicle is started or the transfer case (if equipped) is shifted out of 4WD LOW range. This mode should be used for most driving situations. ESC should only be turned to Partial Off or Full Off for specific reasons as noted. Refer to Partial Off and to Full Off for additional information.
WARNING!
The Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of an ESC equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the users safety or the safety of others.
Partial Off Two-Wheel Drive Vehicles And Four-Wheel Drive Vehicles In 2WD And 4WD High Range The Partial Off mode is intended for driving in deep snow, sand, or gravel. This mode raises the threshold for TCS and ESC activation, which allows for more wheel spin than what ESC normally allows.
Partial Off mode by momentarily pressing the ESC Off button. Once the situation requiring Partial Off mode is overcome, turn ESC back on by momentarily pressing the ESC Off button. This may be done while the vehicle is in motion.
Full Off Four-Wheel Drive Vehicles In 4WD High And 4WD Low Range The ESC Off button is located in the lower switch bank The Full Off mode is intended for off-highway and below the climate control. To enter the Partial Off off-road use when ESC stability features could inhibit mode, momentarily press the ESC Off button and the vehicle maneuverability due to trail conditions. ESC Activation/Malfunction Indicator Light will illu- The ESC Off button is located in the lower switch bank minate. To turn the ESC on again, momentarily press the below the climate control panel. To enter Full Off ESC Off button and the ESC Activation/Malfunction mode, press and hold the ESC Off button for five Indicator Light will turn off. This will restore the normal seconds while the vehicle is stopped with the engine ESC On mode of operation. running. After five seconds, the ESC Activation/ NOTE: To improve the vehicles traction when driving Malfunction Indicator Light will illuminate and an ESC with snow chains, or when starting off in deep snow, OFF message will appear in the odometer. Press and sand, or gravel, it may be desirable to switch to the release the trip odometer button located on the instrument cluster to turn off this message.
In this mode, ESC and TCS are turned off (except for the limited slip feature described in the TCS section) until the vehicle reaches a speed of 40 mph (64 km/k). At speeds over 40 mph (64 km/k), the system automatically switches to Partial Off mode, described above. When the vehicle speed returns to less than 35 mph (56 km/h), the ESC system will return to Full Off mode. The ESC Activation/Malfunction Indicator Light is always illuminated when ESC is off. To turn ESC on again, momentarily press the ESC Off button. This will restore the normal ESC On mode of operation.
to the PARK position and then moved out of the PARK position. This will occur even if the message was cleared previously.
WARNING!
With the ESC switched off, the enhanced vehicle stability offered by ESC is unavailable. In an emergency evasive maneuver, the ESC system will not engage to assist in maintaining stability. Full Off mode is only intended for off-highway or off-road use.
NOTE: Full Off is the only operating mode for ESC in 4WD ESC Activation/Malfunction Indicator Light And LOW range. The ESC system will be in this mode ESC OFF Indicator Light whenever the vehicle is started in 4WD LOW range or The ESC Activation/Malfunction Indicator the transfer case is shifted into 4WD LOW range. Light in the instrument cluster will come on when the ignition switch is turned to the ON The ESC OFF message will display and a chime will position. It should go out with the engine sound when the shift lever is moved from any position running. If the ESC Activation/Malfunction Indicator
Light comes on continuously with the engine running, a NOTE: malfunction has been detected in the ESC system. If this The ESC Activation/Malfunction Indicator Light and the ESC OFF Indicator Light come on momenlight remains on after several ignition cycles, and the tarily each time the ignition switch is turned ON. vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your autho Each time the ignition is turned ON, the ESC system rized dealer as soon as possible to have the problem will be ON even if it was turned off previously. diagnosed and corrected. The ESC system will make buzzing or clicking sounds The ESC Activation/Malfunction Indicator Light (lowhen it is active. This is normal; the sounds will stop cated in the instrument cluster) starts to flash as soon as when ESC becomes inactive following the maneuver the tires lose traction and the ESC system becomes active. that caused the ESC activation. The ESC Activation/Malfunction Indicator Light also The ESC OFF Indicator Light indicates the flashes when TCS is active. If the ESC Activation/ Electronic Stability Control (ESC) is off. Malfunction Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
TIRE SAFETY INFORMATION Tire Markings
NOTE: P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter P molded into the sidewall preceding the size designation. Example: P215/65R15 95H. European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter P is absent from this tire size designation. Example: 215/65R15 96H. LT (Light Truck) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters LT that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are spares designed for temporary emergency use only. Temporary high pressure
1 U.S. DOT Safety Standards Code (TIN) 2 Size Designation 3 Service Description
4 Maximum Load 5 Maximum Pressure 6 Treadwear, Traction and Temperature Grades
compact spare tires have the letter T or S molded High flotation tire sizing is based on U.S. design into the sidewall preceding the size designation. Exstandards and it begins with the tire diameter molded ample: T145/80D18 103M. into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ....blank.... = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) Ratio of section height to section width of tire 10.5 = Section width in inches (in) R = Construction code R means radial construction D means diagonal or bias construction 15 = Rim diameter in inches (in)
EXAMPLE: Service Description: 95 = Load Index A numerical code associated with the maximum load a tire can carry H = Speed Symbol A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) Load Identification: ....blank.... = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinforced) tire Light Load (LL) = Light load tire C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure Maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits) 03 = Number representing the week in which the tire was manufactured (two digits) 03 means the 3rd week. 01 = Number representing the year in which the tire was manufactured (two digits) 01 means the year 2001 Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991
Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period. Inflation pressure is measured in units of PSI (pounds per square inch) or kPa (kilopascals). The maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall. Vehicle manufacturers recommended cold tire inflation pressure as shown on the tire placard. A paper label permanently attached to the vehicle describing the vehicles loading capacity, the original equipment tire sizes and the recommended cold tire inflation pressures.
Maximum Inflation Pressure
Recommended Cold Tire Inflation Pressure Tire Placard
Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the drivers side B-Pillar or the rear edge of the drivers side door.
Tire And Loading Information Placard
Tire and Loading Information Placard
Tire Placard Location
To determine the maximum loading conditions of your vehicle, locate the statement The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg on the Tire and Loading Information placard. The combined weight of occupants, cargo/luggage and Loading trailer tongue weight (if applicable) should never exceed The vehicle maximum load on the tire must not exceed the weight referenced here. the load carrying capacity of the tire on your vehicle. You will not exceed the tires load carrying capacity if you Steps For Determining Correct Load Limit adhere to the loading conditions, tire size, and cold tire 1. Locate the statement The combined weight of occuinflation pressures specified on the Tire and Loading pants and cargo should never exceed XXX lbs or XXX kg Information placard and in the Vehicle Loading section on your vehicles placard. of this manual. 2. Determine the combined weight of the driver and NOTE: Under a maximum loaded vehicle condition, passengers that will be riding in your vehicle. gross axle weight ratings (GAWRs) for the front and rear
This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires.
axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to Vehicle Loading in this section.
3. Subtract the combined weight of the driver and pas- NOTE: The following table shows examples on how to calcusengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity. For example, if XXX and number and size of occupants. This table is for amount equals 1,400 lbs (635 kg) and there will be five illustration purposes only and may not be accurate for 150 lb (68 kg) passengers in your vehicle, the amount of the seating and load carry capacity of your vehicle. available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 750 = 650 lbs For the following example, the combined weight of occupants and cargo should never exceed 865 lbs [295 kg]). (392 kg). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
WARNING!
Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure:
Safety
WARNING!
Improperly inflated tires are dangerous and can cause collisions. Under-inflation increases tire flexing and can result in over-heating and tire failure. Over-inflation reduces a tires ability to cushion shock. Objects on the road and chuckholes can cause damage that result in tire failure. Over-inflated or under-inflated tires can affect vehicle handling and can fail suddenly, resulting in loss of vehicle control. Unequal tire pressures can cause steering problems. You could lose control of your vehicle. (Continued)
Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under-inflation also increases tire rolling resistance resulting in higher fuel consumption.
stability of the vehicle and can produce a feeling of sluggish response or over responsiveness in the steering. Unequal tire pressures can cause erratic and unpredictable steering response. Unequal tire pressure from side to side may cause the vehicle to drift left or right. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the drivers side B Pillar or rear edge of the drivers side door.
The pressure should be checked and adjusted, as well as inspected for signs of tire wear or visible damage, at least once a month. Use a good quality pocket-type gauge to check tire pressure. Do not make a visual judgement Ride Comfort And Vehicle Stability Proper tire inflation contributes to a comfortable ride. when determining proper inflation. Radial tires may look Over-inflation produces a jarring and uncomfortable properly inflated even when they are under-inflated. ride. Both under-inflation and over-inflation affect the
CAUTION!
After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it.
Tire pressures change by approximately 1 psi (7 kPa) per 12F (7C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
Example: If garage temperature = 68F (20C) and the outside temperature = 32F (0C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), Inflation pressures specified on the placard are always which equals 1 psi (7 kPa) for every 12F (7C) for this cold tire inflation pressure. Cold tire inflation pressure is outside temperature condition. defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) (1.6 km) after a three-hour period. The cold tire inflation during operation. DO NOT reduce this normal pressure pressure must not exceed the maximum inflation pres- build-up, or your tire pressure will be too low. sure molded into the tire sidewall. Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire pressures vary with temperature changes.
Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly. The instability could cause a collision. Alloading may be required for high-speed vehicle operaways use radial tires in sets of four. Never combine tion. Refer to original equipment or an authorized tire them with other types of tires. dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Cuts and punctures in radial tires are repairable only in the tread area because of sidewall flexing. Consult your WARNING! authorized dealer for radial tire repairs. High speed driving with your vehicle at or above Spare Tire Matching Original Equipped Tire And maximum load is dangerous. The added strain on Wheel If Equipped your tires could cause them to fail. You could have a Your vehicle may be equivalent with a spare tire and serious collision. Do not drive a vehicle loaded to the wheel in look and function as the original equipment tire maximum capacity at continuous speeds above and wheel found on the front or rear axle of your vehicle. 75 mph (120 km/h). This spare tire may be used in the tire rotation for your
vehicle. If your vehicle has this option refer to an Compact Spare Tire If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a pattern. compact spare by looking at the spare tire description on If your vehicle is not equipped with an original equipthe Tire and Loading Information Placard located on the ment tire and wheel as a spare, a non-matching tempodrivers side door opening or on the sidewall of the tire. rary emergency use spare may be equipped with your Compact spare tire descriptions begin with the letter T vehicle. Temporary use spares are engineered to be used or S preceding the size designation. Example: T145/ only with your vehicle. Your vehicle may be equipped 80D18 103M. with one of the following types of non-matching temporary use spares; compact, full size, or limited-use. Do not T, S = Temporary Spare Tire install more than one non-matching temporary use spare Since this tire has limited tread life the original equiptire/wheel on the vehicle at any given time. ment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity.
CAUTION!
Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a compact, full size or limited-use temporary spare installed. Damage to the vehicle may result.
Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. Do not install more than one compact spare tire and wheel on the vehicle at any given time.
WARNING!
Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity.
Limited-Use Spare If Equipped The limited-use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited-use spare wheel. This label contains the driving limitations for this spare. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited-use spare tire affects vehicle handling. Since it is not the same as Full Size Spare If Equipped your original equipment tire, replace (or repair) the The full size spare is for temporary emergency use only. original equipment tire and reinstall on the vehicle at the This tire may look like the original equipped tire on the first opportunity. front or rear axle of your vehicle, but it is not. This spare tire may have limited tread life. When the tread is worn to the tread wear indicators, the temporary use full size spare tire needs to be replaced. Since it is not the same as
WARNING!
Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your Tire and Loading Information Placard located on the drivers side door opening. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on your vehicle. Failure to do so could result in loss of vehicle control.
Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicles wheels above 30 mph (48 km/h).
WARNING!
Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicles wheels faster than 30 mph (48 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced.
These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced.
CAUTION!
Proper operation of four-wheel drive vehicles depends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear. Life Of Tire The service life of a tire is dependent upon various factors including but not limited to:
1 Worn Tire 2 New Tire
Driving style Tire pressure
Distance driven
WARNING!
Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death.
when replacement is needed. (Refer to the paragraph on Tread Wear Indicators). Refer to the Tire and Loading Information placard for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall. See the Tire Sizing Chart example found in the Tire Safety Information section of this manual for more information relating to the Load Index and Speed Symbol of a tire.
It is recommended to replace the two front tires or two Keep dismounted tires in a cool, dry place with as little rear tires as a pair. Replacing just one tire can seriously exposure to light as possible. Protect tires from contact affect your vehicles handling. If you ever replace a wheel, make sure that the wheels specifications match with oil, grease, and gasoline. those of the original wheels. Replacement Tires The tires on your new vehicle provide a balance of many It is recommended you contact your original equipment characteristics. They should be inspected regularly for or an authorized tire dealer with any questions you may wear and correct cold tire inflation pressure. The manu- have on tire specifications or capability. Failure to use facturer strongly recommends that you use tires equiva- equivalent replacement tires may adversely affect the lent to the originals in size, quality and performance safety, handling, and ride of your vehicle.
WARNING!
Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death. Use only the tire and wheel sizes with load ratings approved for your vehicle. Never use a tire with a smaller load index or capacity than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision. (Continued)
Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control.
CAUTION!
Replacing original tires with tires of a different size may result in false speedometer and odometer readings. TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type Class S specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. In addition, only install tire chains of the rear tires with P225/75R16 or smaller tires.
CAUTION!
To avoid damage to your vehicle, tires, or chains, observe the following precautions: Do not use tire chains on vehicles equipped with tires other than P225/75R16 or smaller tires. There may not be adequate clearance for the chains and you are risking structural or body damage to your vehicle. Because of limited chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious vehicle damage. Stop the vehicle immediately if noise occurs that could suggest chain breakage. Remove the damaged parts of the chain before further use. (Continued)
Install chains on the rear wheels as tightly as possible and then retighten after driving about 12 mile (0.8 km). Do not exceed 45 mph (72 km/h). Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle. Use on Rear Wheels only. Do not drive for a prolonged period on dry pavement. Observe the tire chain manufacturers instructions on method of installation, operating speed, and conditions for use. Always use the lower suggested operating speed of the chain manufacturer if different from the speed recommended by the manufacturer.
These cautions apply to all chain traction devices, including link and cable (radial) chains. TIRE ROTATION RECOMMENDATIONS The tires on the front and rear of your vehicle operate at different loads and perform different steering, handling, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on On/Off Road type tires. Rotation will increase tread life, help to maintain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Refer to the Maintenance Schedule for the proper maintenance intervals. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed.
The suggested rotation method is the forward-cross shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed.
Tire Rotation
CAUTION!
Proper operation of four-wheel drive vehicles depends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear. TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12F (6.5C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a
three hour period. The cold tire inflation pressure must not exceed the maximum inflation pressure molded into the tire sidewall. Refer to Tires General Information in Starting and Operating for information on how to properly inflate the vehicles tires. The tire pressure will also increase as the vehicle is driven. This is normal and there should be no adjustment for this increased pressure. The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure. Once the low tire pressure warning (Tire Pressure Monitoring Telltale Light) illuminates, you must increase the tire pressure to the recommended
cold placard pressure in order for the Tire Pressure Telltale Light will turn off only after the tires are inflated Monitoring Telltale Light to turn off. The system will to the vehicles recommended cold placard pressure automatically update and the Tire Pressure Monitoring value. Telltale Light will turn off once the system receives the CAUTION! updated tire pressures. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in The TPMS has been optimized for the original order for the TPMS to receive this information. equipment tires and wheels. TPMS pressures and For example, your vehicle may have a recommended warning have been established for the tire size cold (parked for more than three hours) placard pressure equipped on your vehicle. Undesirable system of 33 psi (227 kPa). If the ambient temperature is 68F operation or sensor damage may result when us(20C) and the measured tire pressure is 28 psi (193 kPa), ing replacement equipment that is not of the same a temperature drop to 20F (-7C) will decrease the tire size, type, and/or style. Aftermarket wheels can pressure to approximately 24 psi (165 kPa). This tire cause sensor damage. Do not use aftermarket tire pressure is low enough to turn ON the Tire Pressure sealants or balance beads if your vehicle is Monitoring Telltale Light. Driving the vehicle may cause equipped with a TPMS, as damage to the sensors the tire pressure to rise to approximately 28 psi (193 kPa), may result. but the Tire Pressure Monitoring Telltale Light will still (Continued) be on. In this situation, the Tire Pressure Monitoring
After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the Tire Pressure Monitoring Sensor.
The TPMS is not a substitute for proper tire maintenance, and it is the drivers responsibility to maintain correct tire pressure using an accurate tire pressure gauge, even if under-inflation has not reached the level to trigger illumination of the Tire Pressure Monitoring Telltale Light.
Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in NOTE: the tire. The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire Base System failure or condition. The Tire Pressure Monitor System (TPMS) uses wireless The TPMS should not be used as a tire pressure gauge technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each while adjusting your tire pressure. wheel as part of the valve stem, transmit tire pressure Driving on a significantly under-inflated tire causes readings to the receiver module. the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire NOTE: It is particularly important for you to check the tread life, and may affect the vehicles handling and tire pressure in all of the tires on your vehicle monthly and to maintain the proper pressure. stopping ability.
The TPMS consists of the following components: Receiver Module Four Tire Pressure Monitoring Sensors Tire Pressure Monitoring Telltale Light The matching full-size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The matching full-size spare can be used in place of any of the four road tires. The TPMS will only monitor the pressure in the full-size spare when it is used in place of a road tire. Otherwise, a spare with a pressure below the lowpressure limit will not cause the Tire Pressure Monitoring Telltale Light to illuminate or the chime to sound.
Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster, a LOW TIRE PRESSURE message will display in the instrument cluster, and a chime will sound when tire pressure is low in one or more of the four active road tires. Should this occur, you should stop as soon as possible, check the inflation pressure of each tire on your vehicle, and inflate each tire to the vehicles recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update and the Tire Pressure Monitoring Telltale Light will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
Service TPMS Warning When a system fault is detected, the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The Tire Pressure Monitoring Telltale Light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following:
Vehicles With Full-Size Spare 1. The matching full-size spare wheel and tire assembly has a tire pressure monitoring sensor that can be monitored by the TPMS.
2. If you install the full-size spare in place of a road tire that has a pressure below the low-pressure warning limit, a chime will sound and the TPMS Telltale Light and LOW TIRE PRESSURE message will turn on upon the 1. Jamming due to electronic devices or driving next to next ignition key cycle. facilities emitting the same radio frequencies as the TPMS 3. Driving the vehicle for up to 20 minutes above 15 mph sensors. (24 km/h) will turn off the TPMS Telltale Light, as long 2. Installing some form of aftermarket window tinting as no tire pressure is below the low-pressure warning limit in any of the four active road tires. that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel Vehicles With Compact Spare housings. 1. The compact spare tire does not have a tire pressure 4. Using tire chains on the vehicle. monitoring sensor. Therefore, the TPMS will not monitor 5. Using wheels/tires not equipped with TPMS sensors. the pressure in the compact spare tire.
2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, a chime will sound and the TPMS Telltale Light and LOW TIRE PRESSURE message will turn on upon the next ignition key cycle.
active road tires. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
Premium System If Equipped The Tire Pressure Monitor System (TPMS) uses wireless 3. After driving the vehicle for up to 20 minutes above technology with wheel rim mounted electronic sensors to 15 mph (24 km/h), the TPMS Telltale Light will flash monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure on and off for 75 seconds and then remain on solid. readings to the receiver module. 4. For each subsequent ignition key cycle, a chime will sound and the TPMS Telltale Light will flash on and off NOTE: It is particularly important for you to check the tire pressure in all of the tires on your vehicle monthly for 75 seconds and then remain on solid. and to maintain the proper pressure. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare, The TPMS consists of the following components: the TPMS will update automatically and the TPMS Receiver Module Telltale Light will turn off, as long as no tire pressure is below the low-pressure warning limit in any of the four Four Tire Pressure Monitoring Sensors
Three Trigger Modules (mounted in three of the four will sound when tire pressure is low in one or more of the four active road tires. In addition, the Electronic Vehicle wheel-wells) Information Center (EVIC) will display a LOW TIRE Various Tire Pressure Monitoring System messages, PRESSURE message for a minimum of five seconds and which display in the Electronic Vehicle Information a graphic showing the pressure values of each tire with Center (EVIC) the low tire pressure values flashing. Tire Pressure Monitoring Telltale Light The matching full size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The full size spare can be used in place of any of the four road tires. A spare with a pressure below the low-pressure limit will not cause the Tire Pressure Monitoring Telltale Light to illuminate or the chime to sound. However, it will cause a SPARE LOW PRESSURE message to display in the EVIC. Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster and a chime
Should this occur, you should stop as soon as possible seconds and then display dashes (- -) in place of the and inflate the tires with low pressure (those flashing in pressure value to indicate which sensor is not being the EVIC graphic) to the vehicles recommended cold received. placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashing, and the Tire Pressure Monitoring Telltale Light will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. SERVICE TPMS Warning When a system fault is detected, the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. In addition, the EVIC will display a SERVICE TPM SYSTEM message for three
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the Tire Pressure Monitoring Telltale Light will no longer flash, and the SERVICE TPM SYSTEM message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following:
Vehicles With Full-Size Spare 1. The matching full size spare wheel and tire assembly has a tire pressure monitoring sensor that can be monitored by the TPMS.
2. If you install the full size spare in place of a road tire that has a pressure below the low-pressure warning limit, a chime will sound and the TPMS Telltale Light will 1. Jamming due to electronic devices or driving next to turn on upon the next ignition key cycle. In addition, the facilities emitting the same radio frequencies as the TPMS EVIC will display a Low Pressure message and a graphic sensors. showing the low tire pressure value flashing. 2. Installing some form of aftermarket window tinting 3. After driving the vehicle for up to 20 minutes above that affects radio wave signals. 15 mph (24 km/h) the TPMS Telltale Light will turn 3. Lots of snow or ice around the wheels or wheel OFF, as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires. housings. 4. The EVIC will display a graphic showing the tire pressure value in place of the flashing low tire pressure 5. Using wheels/tires not equipped with TPMS sensors. value. The EVIC will also display a SPARE LOW PRESSURE message to remind you to service the flat tire. 4. Using tire chains on the vehicle.
4. For each subsequent ignition key cycle, a chime will sound, the TPMS Telltale Light will flash on and off for 1. The compact spare tire does not have a tire pressure 75 seconds and then remain on solid, and the EVIC will monitoring sensor. Therefore, the TPMS will not monitor display a SERVICE TPM SYSTEM message for five the pressure in the compact spare tire. seconds and then display dashes (- -) in place of the 2. If you install the compact spare tire in place of a road pressure value. tire that has a pressure below the low-pressure warning 5. Once you repair or replace the original road tire and limit, upon the next ignition key cycle, the TPMS Telltale reinstall it on the vehicle in place of the compact spare, Light will remain on and a chime will sound. In the TPMS will update automatically. In addition, the addition, the graphic in the EVIC will still display a TPMS Telltale Light will turn off and the graphic in the flashing pressure value. EVIC will display a new pressure value instead of dashes 3. After driving the vehicle for up to 20 minutes above (- -), as long as no tire pressure is below the low-pressure 15 mph (24 km/h), the TPMS Telltale Light will flash warning limit in any of the four active road tires. The on and off for 75 seconds and then remain on solid. In vehicle may need to be driven for up to 20 minutes above addition, the EVIC will display a SERVICE TPM SYS- 15 mph (24 km/h) in order for the TPMS to receive this TEM message for five seconds and then display dashes information. (- -) in place of the pressure value. Vehicles With Compact Spare
General Information FUEL REQUIREMENTS This device complies with Part 15 of the FCC rules and All engines are designed to meet all emisRSS 210 of Industry Canada. Operation is subject to the sions regulations and provide excellent following conditions: fuel economy and performance when using high quality unleaded regular gaso This device may not cause harmful interference. line having an octane rating of 87. The use This device must accept any interference received, of premium gasoline is not recommended, including interference that may cause undesired as it will not provide any benefit over regular gasoline in operation. these engines. The tire pressure sensors are covered under one of the Light spark knock at low engine speeds is not harmful to following licenses: your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is United States . . . . . . . . . . . . . . . . . . . MRXC4N3MF9 required. Poor quality gasoline can cause problems such Canada . . . . . . . . . . . . . . . . . . . . . . 2546A-C4N3MF9 as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before considering service for the vehicle.
Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the Worldwide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recommends the use of gasoline that meets the WWFC specifications if they are available. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as Reformulated Gasoline. Reformulated gasolines contain oxygenates, and are specifically blended to reduce vehicle emissions and improve air quality.
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as Ethanol. Fuels blended with oxygenates may be used in your vehicle.
CAUTION!
DO NOT use gasoline containing Methanol or gasoline containing more than 10% Ethanol. Use of these blends may result in starting and driveability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Pump labels should clearly communicate if a fuel contains greater than 10% Ethanol.
The manufacturer supports the use of reformulated gasolines. Properly blended reformulated gasolines will proProblems that result from using gasoline containing vide excellent performance and durability of engine and Methanol or gasoline containing more than 10% Ethanol fuel system components. are not the responsibility of the manufacturer and may not be covered under warranty.
To fix a Non-FFV vehicle inadvertently fueled once with E-85 Usage In Non-Flex Fuel Vehicles Non-FFV vehicles are compatible with gasoline contain- E-85 perform the following: ing 10% ethanol (E10). Gasoline with higher ethanol drain the fuel tank (see your authorized dealer) content may void the vehicles warranty. change the engine oil and oil filter If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: disconnect and reconnect the battery to reset the engine controller memory operate in a lean mode More extensive repairs will be required for prolonged OBD II Malfunction Indicator Light on exposure to E-85 fuel. poor engine performance MMT In Gasoline poor cold start and cold drivability MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline increased risk for fuel system component corrosion blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content
of gasoline may not be indicated on the gasoline pump; Fuel System Cautions therefore, you should ask your gasoline retailer whether CAUTION! the gasoline contains MMT. It is even more important to look for gasolines without MMT in Canada, because Use the following guidelines to maintain your vehiMMT can be used at levels higher than those allowed in cles performance: the United States. MMT is prohibited in Federal and The use of leaded gas is prohibited by Federal law. California reformulated gasoline. Using leaded gasoline can impair engine perforMaterials Added To Fuel mance, and damage the emission control system. All gasoline sold in the United States is required to An out-of-tune engine, or certain fuel or ignition contain effective detergent additives. Use of additional malfunctions, can cause the catalytic converter to detergents or other additives is not needed under normal overheat. If you notice a pungent burning odor or conditions and they would result in additional cost. some light smoke, your engine may be out of tune Therefore, you should not have to add anything to the or malfunctioning and may require immediate fuel. service. Contact your authorized dealer for service assistance. (Continued)
The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
Carbon Monoxide Warnings
WARNING!
Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning. Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period. If the vehicle is stopped in an open area with the engine running for more than a short period, adjust the ventilation system to force fresh, outside air into the vehicle. (Continued)
Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door, on the drivers side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehicle.
Fuel Filler Cap
CAUTION!
Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. A poorly fitting gas cap may cause the MIL to turn on. To avoid fuel spillage and overfilling, do not top off the fuel tank after filling.
WARNING!
Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the MIL to turn on. A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: When the fuel nozzle clicks or shuts off, the fuel tank is full. Tighten the gas cap about one quarter turn until you hear one click. This is an indication that the cap is properly tightened.
If the gas cap is not tightened properly, the MIL will VEHICLE LOADING come on. Be sure the gas cap is tightened every time Certification Label the vehicle is refueled. As required by National Highway Traffic Safety AdminLoose Fuel Filler Cap Message istration regulations, your vehicle has a certification label If the vehicle diagnostic system determines that the fuel affixed to the drivers side door or B-Pillar. filler cap is loose, improperly installed, or damaged, a This label contains the month and year of manufacture, gASCAP message will display in the odometer or a Gross Vehicle Weight Rating (GVWR), Gross Axle Weight CHECK GASCAP message will be displayed in the Rating (GAWR) front and rear, and Vehicle Identification Electronic Vehicle Information Center (EVIC). Refer to Number (VIN). A Month-Day-Hour (MDH) number is Electronic Vehicle Information Center (EVIC) in Unincluded on this label and indicates the month, day, and derstanding Your Instrument Panel for further review. hour of manufacture. The bar code that appears on the Tighten the fuel filler cap until a clicking sound is bottom of the label is your VIN. heard. This is an indication that the fuel filler cap is properly tightened. Refer to Onboard Diagnostic System in Maintaining Your Vehicle for further information.
Gross Vehicle Weight Rating (GVWR) The GVWR is the total permissible weight of your vehicle including driver, passengers, vehicle, options, trailer tongue weight, and cargo. The label also specifies maximum capacities of front and rear axle systems (GAWR). Total load must be limited, so GVWR, and front and rear GAWR are not exceeded.
springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by purchasers for increased durability, does not necessarily increase the vehicles GVWR. Tire Size The tire size on the label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Payload The payload of a vehicle is defined as the allowable load Rim Size weight a truck or any given vehicle can carry, including This is the rim size that is appropriate for the tire size the weight of the driver, all passengers, options and listed. cargo. Inflation Pressure Gross Axle Weight Rating (GAWR) This is the cold tire inflation pressure for your vehicle for The GAWR is the maximum permissible load on the front all loading conditions up to full GAWR. and rear axles. The load must be distributed in the cargo area so that the GAWR of each axle is not exceeded. Curb Weight The curb weight of a vehicle is defined as the total weight Each axles GAWR is determined by the components in of the vehicle with all fluids, including vehicle fuel, at full the system with the lowest load carrying capacity (axle,
capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are added.
until the specified weight limitations are met. Store the heavier items down low and be sure that the weight is distributed equally. Stow all loose items securely before driving.
Improper weight distributions can have an adverse affect Loading on the way your vehicle steers and handles, and the way The actual total weight and the weight of the front and the brakes operate. rear of your vehicle at the ground can best be determined CAUTION! by weighing it when it is loaded and ready for operation. The entire vehicle should first be weighed on a commercial scale to ensure that the GVWR has not been exceeded. The weight on the front and rear of the vehicle should then be determined separately to be sure that the load is properly distributed over front and rear axle. Weighing the vehicle may show that the GAWR of either the front or rear axles has been exceeded, but the total load is within the specified GVWR. If so, weight must be shifted from front to rear, or rear to front, as appropriate Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle.
TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible.
exceed the GVWR. Refer to Vehicle Loading/Vehicle Certification Label in Starting and Operating for further information.
Gross Trailer Weight (GTW) The GTW is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or temTo maintain warranty coverage, follow the requirements porary) loaded in or on the trailer in its loaded and and recommendations in this manual concerning ve- ready for operation condition. hicles used for trailer towing. The recommended way to measure GTW is to put your Common Towing Definitions fully loaded trailer on a vehicle scale. The entire weight The following trailer towing related definitions will assist of the trailer must be supported by the scale. you in understanding the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, cargo, and tongue weight. The total load must be limited so that you do not
WARNING!
If the Gross Trailer Weight (GTW) is 3,500 lbs (1 587 kg) or more, it is mandatory to use a weightdistributing hitch to ensure stable handling of your vehicle. If you use a standard weight- carrying hitch, you could lose control of your vehicle and cause a collision.
rear GAWR. Refer to Vehicle Loading/Vehicle Certification Label in Starting and Operating for further information.
WARNING!
It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision.
Gross Combination Weight Rating (GCWR) The GCWR is the total permissible weight of your vehicle Tongue Weight (TW) and trailer when weighed in combination. The tongue weight is the downward force exerted on the NOTE: The GCWR rating includes a 150 lbs (68 kg) hitch ball by the trailer. In most cases, it should not be less than 10% or more than 15% of the trailer load. You must allowance for the presence of a driver. consider this as part of the load on your vehicle. Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear Frontal Area axles. Distribute the load over the front and rear axles The frontal area is the maximum height multiplied by the evenly. Make sure that you do not exceed either front or maximum width of the front of a trailer.
Trailer Sway Control Mechanical The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they are commonly used to tow small- and mediumsized trailers.
Weight-Distributing Hitch A weight-distributing system works by applying leverage through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight to the tow vehicles front axle and the trailer axle(s). When used in accordance with the manufacturers directions, it provides for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety. The addition of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load equalizing) hitch are recommended for heavier Tongue Weights (TW) and may be required depending on Vehicle and Trailer configuration/loading to comply with Gross Axle Weight Rating (GAWR) requirements.
WARNING!
An improperly adjusted Weight Distributing Hitch system may reduce handling, stability, braking performance, and could result in a collision. Weight Distributing Systems may not be compatible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information.
Without Weight Distributing Hitch (Incorrect)
5
With Weight Distributing Hitch (Correct) Improper Adjustment of Weight-Distributing Hitch (Incorrect)
Trailer Hitch Classification Your vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow. This should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Max. GTW towable for your given drivetrain.
Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium 3,500 lbs (1 587 kg) Duty Class III - Heavy Duty 5,000 lbs (2 268 kg) Class IV - Extra 10,000 lbs (4 540 kg) Heavy Duty Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Maximum Gross Trailer Weight (GTW) towable for your given drivetrain. All trailer hitches should be professionally installed on your vehicle.
Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Model Frontal Area Max. GTW Max. Tongue Wt. Transmission (Gross Trailer Wt.) (See Note) 3.7L/Automatic 4x2 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.7L/Automatic 4x4 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) Refer to local laws for maximum trailer towing speeds. NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo (ie. the GVWR), and the GVWR should never exceed the weight referenced on the Tire and Loading Information placard. Refer to Tire Safety Information in Starting and Operating for further information.
When Towing Trailers With Gross Trailer Weight (GTW) Between 3,500 Lbs (1 588 kg) And 5,000 Lbs (2 268 kg) The following chart provides maximum trailer weight ratings towable for the following engine/transmission combinations, ONLY if using a weight distributing hitch. Engine/ Model Frontal Area Max. GTW Max. Tongue Wt. Transmission (Gross Trailer Wt.) (See Note) 3.7L/Automatic 4x2 64 sq ft (5.94 sq m) 5,000 lbs (2 268 kg) 500 lbs (227 kg) w/Trailer Tow Package 3.7L/Automatic 4x4 64 sq ft (5.94 sq m) 5,000 lbs (2 268 kg) 500 lbs (227 kg) w/Trailer Tow package Refer to local laws for maximum trailer towing speeds. NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo (ie. the GVWR), and the GVWR should never exceed the weight referenced on the Tire and Loading Information placard. Refer to Tire Safety Information in Starting and Operating for further information.
Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer collisions.
5
Consider the following items when computing the weight on the rear axle of the vehicle: The tongue weight of the trailer. The weight of any other type of cargo or equipment put in or on your vehicle. The weight of the driver and all passengers.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information placard for the maximum combined weight of occupants and cargo for your vehicle. Towing Requirements To promote proper break-in of your new vehicle drivetrain components, the following guidelines are recommended:
Then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine and other parts of the vehicle wear in at the heavier loads.
WARNING!
Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: (Continued)
CAUTION!
Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged. (Continued)
Make certain that the load is secured in the trailer and that is will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision. When hauling cargo, or towing a trailer, do not overload your vehicle or trailer. Overloading can cause a loss of control, poor performance, or damage to brakes, axle, engine, transmission, steering, suspension, chassis structure, or tires. Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. (Continued)
Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle transmission in PARK. Always, block or chock the trailer wheels. GCWR must not be exceeded. Total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. GVWR 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight).
Towing Requirements Tires Do not attempt to tow a trailer while using a compact spare tire.
on replacement tires and for the proper tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicles GVWR and GAWR limits.
Proper tire inflation pressures are essential to the safe Towing Requirements Trailer Brakes and satisfactory operation of your vehicle. Refer to Tires General Information in Starting and Oper- Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. ating for information on tire pressures and for proper This could cause inadequate braking and possible tire inflation procedures. personal injury. Check the trailer tires for proper tire inflation pres An electronically actuated trailer brake controller is sures before trailer usage. required when towing a trailer with electronically Check for signs of tire wear or visible tire damage actuated brakes. When towing a trailer equipped with before towing a trailer. Refer to Tires General a hydraulic surge actuated brake system, an electronic Information in Starting and Operating for informabrake controller is not required. tion on tread wear indicators and for the proper Trailer brakes are recommended for trailers over inspection procedure. 1,000 lbs (454 kg) and required for trailers in excess of When replacing tires, refer to Tires General Infor2,000 lbs (907 kg). mation in Starting and Operating for information
CAUTION!
If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances.
Towing any trailer will increase your stopping distance. When towing you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in a collision. Towing Requirements Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four and sevenpin wiring harness. Use a factory approved trailer harness and connector.
WARNING!
Do not connect trailer brakes to your vehicles hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have a collision.
(Continued) NOTE: Do not cut or splice wiring into the vehicles wiring harness.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.
Seven-Pin Connector
1 2 3 4 Battery Backup Lamps Right Stop/Turn Electric Brakes 5 Ground 6 Left Stop/Turn 7 Running Lamps
Four-Pin Connector
1 Female Pins 2 Male Pin 3 Ground 4 Park 5 Left Stop/Turn 6 Right Stop/Turn
specified for police, taxi, fleet, or frequent trailer towTowing Tips Before setting out on a trip, practice turning, stopping, ing. Refer to Maintenance Schedule for the proper and backing the trailer in an area located away from maintenance intervals. heavy traffic. TOW/HAUL Automatic Transmission To reduce potential for automatic transmission overheatThe DRIVE range can be selected when towing. How- ing, press the TOW/HAUL button when driving in hilly ever, if frequent shifting occurs while in this range, areas or select the 2 range on more severe grades. Refer activate the TOW/HAUL feature. Refer to Automatic to Automatic Transmission in Starting and OperatTransmission in Starting and Operating for further ing for further information. information. Electronic Speed Control If Equipped NOTE: Using the TOW/HAUL feature while operating Do not use in hilly terrain or with heavy loads. the vehicle under heavy operating conditions will improve performance and extend transmission life by re- When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until ducing excessive shifting and heat build up. This action you can get back to cruising speed. will also provide better engine braking. If you REGULARLY tow a trailer for more than 45 min- Use speed control in flat terrain and with light loads to maximize fuel efficiency. utes of continuous operation, then change the automatic transmission fluid and filter according to the interval
Cooling System Highway Driving To reduce potential for engine and transmission over- Reduce speed. heating, take the following actions: Air Conditioning Turn off temporarily. City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheel OFF the Ground Two-Wheel Drive Models Four-Wheel Drive Models See Instructions Flat Tow NONE NOT ALLOWED Transmission in PARK Transfer case in NEUTRAL (N) Tow in forward direction NOT ALLOWED NOT ALLOWED OK
Dolly Tow On Trailer
Front Rear ALL
NOT ALLOWED OK OK
Recreational Towing Two-Wheel Drive Models Recreational towing is allowed ONLY if the rear wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturers instructions. 2. Drive the rear wheels onto the tow dolly.
Flat towing (with all four wheels on the ground) is allowed ONLY if the driveshaft is removed. Towing with the rear wheels on the ground while the driveshaft is connected will result in severe transmission damage.
WARNING!
If the driveshaft is removed, the vehicle can roll even if the transmission is in PARK, which could cause serious injury or death.
3. Firmly set the parking brake. Place the transmission in PARK. The parking brake must be firmly engaged and the wheels chocked during driveshaft removal and installa4. Properly secure the rear wheels to the dolly, following tion. The parking brake must remain engaged unless the the dolly manufacturers instructions. vehicle is securely and properly connected to the tow 5. Remove the ignition key. vehicle, or the driveshaft is completely reinstalled. See your authorized dealer for proper driveshaft removal 6. Install a suitable clamping device, designed for towand reinstallation procedures, including flange ing, to secure the front wheels in the straight position. orientation/alignment, use of thread-locking compound, proper bolt torque specifications, etc.
CAUTION!
Towing with the rear wheels on the ground (while the driveshaft is connected) will cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty. Recreational Towing Four-Wheel Drive Models The transfer case must be shifted into NEUTRAL (N) and the transmission must be placed in PARK for recreational towing. The NEUTRAL (N) selection button is adjacent to the transfer case selector switch. Shifts into and out of transfer case NEUTRAL (N) can take place with the selector switch in any mode position.
CAUTION!
Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. Tow only in a forward direction. Towing this vehicle backwards can cause severe damage to the transfer case. The transmission must be placed in PARK for recreational towing. Before recreational towing, perform the procedure outlined under Shifting into NEUTRAL (N) to be certain that the transfer case is fully in NEUTRAL (N). Otherwise, internal damage will result. Failure to follow these procedures can cause severe transmission and/or transfer case damage. (Continued)
Do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. Shifting Into NEUTRAL (N)
Use the following procedure to prepare your vehicle for recreational towing.
CAUTION!
It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL (N) before recreational towing to prevent damage to internal parts. 1. Bring the vehicle to a complete stop and shift the transmission to PARK. 2. Turn OFF the ignition. 3. Turn the ignition switch to the ON/RUN position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL.
WARNING!
You or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL (N) position without first fully engaging the parking brake. The transfer case NEUTRAL (N) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move, even if the transmission is in PARK. The parking brake should always be applied when the driver is not in the vehicle.
6. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case NEUTRAL (N) button (located above the selector switch) for four seconds, until the light behind the NEUTRAL (N) symbol starts to blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift to NEUTRAL (N) is complete.
7. After the shift is completed and the NEUTRAL light comes on, release the NEUTRAL (N) button. 8. Start the engine. 9. Shift the transmission into REVERSE. 10. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 11. Turn OFF the engine. 12. Firmly apply the parking brake. 13. Shift the transmission into PARK and remove the ignition key.
Neutral Switch
CAUTION!
Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL (N) and the engine running. With the transfer case in NEUTRAL (N) ensure that the engine is off prior to shifting the transmission into PARK.
timer, then the NEUTRAL (N) indicator light will flash continuously until all requirements are met or until the NEUTRAL (N) button is released. The ignition switch must be in the ON/RUN position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON/RUN position, the shift will not take place and no position indicator lights will be on or flashing.
14. Attach the vehicle to the tow vehicle using a suitable A flashing NEUTRAL (N) position indicator light tow bar. indicates that shift requirements have not been met. 15. Release the parking brake. Shifting Out Of NEUTRAL (N) NOTE: Use the following procedure to prepare your vehicle for Steps 1 through 5 are requirements that must be met normal usage. prior to pressing the NEUTRAL (N) button, and must continue to be met until the four seconds elapse and 1. Bring the vehicle to a complete stop, leaving it conthe shift has been completed. If any of these require- nected to the tow vehicle. ments are not met prior to pressing the NEUTRAL (N) 2. Firmly apply the parking brake. button or are no longer met during the four second
3. Turn the ignition switch to the ON/RUN position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL. 6. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case NEUTRAL (N) button (located above the selector switch) for one second.
Neutral Switch
7. After the NEUTRAL (N) indicator light turns off, release the NEUTRAL (N) button. 8. After the NEUTRAL (N) button has been released, the transfer case will shift to the position indicated by the selector switch.
NOTE: When shifting out of transfer case NEUTRAL NOTE: (N), turning the engine OFF may be required to avoid Steps 1 through 5 are requirements that must be met prior to pressing the NEUTRAL (N) button, and must gear clash. continue to be met until the shift has been completed. 9. Shift the transmission into PARK. If any of these requirements are not met prior to pressing the NEUTRAL (N) button or are no longer 10. Release the brake pedal. met during the shift, the NEUTRAL (N) indicator light 11. Disconnect vehicle from the tow vehicle. will flash continuously until all requirements are met or until the NEUTRAL (N) button is released. 12. Start the engine. The ignition switch must be in the ON/RUN position for a shift to take place and for the position indicator 14. Release the parking brake. lights to be operable. If the ignition switch is not in the ON/RUN position, the shift will not take place and no 15. Shift the transmission into DRIVE, release the brake position indicator lights will be on or flashing. pedal, and check that the vehicle operates normally. 13. Press and hold the brake pedal. A flashing NEUTRAL (N) position indicator light indicates that shift requirements have not been met.
WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Flashers . . . . . . . . . . . . . . . . 434 Jump-Starting Procedures . . . . . . . . . . . . . . . . 444 If Your Engine Overheats . . . . . . . . . . . . . . . . 434 Jacking And Tire Changing . . . . . . . . . . . . . . . 435 Preparations For Jump-Start . . . . . . . . . . . . . 444 Jump-Starting Procedure . . . . . . . . . . . . . . . 446
Jack Location . . . . . . . . . . . . . . . . . . . . . . . 436 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . 448 Spare Tire Stowage . . . . . . . . . . . . . . . . . . . 436 Shift Lever Override . . . . . . . . . . . . . . . . . . . 449 Spare Tire Removal . . . . . . . . . . . . . . . . . . . 437 Towing A Disabled Vehicle . . . . . . . . . . . . . . . 450 Preparations For Jacking . . . . . . . . . . . . . . . 438 Jacking Instructions . . . . . . . . . . . . . . . . . . . 439 Road Tire Installation . . . . . . . . . . . . . . . . . 443 Towing Without The Ignition Key Fob . . . . . 452 Two-Wheel Drive Models . . . . . . . . . . . . . . 452 Four-Wheel Drive Models . . . . . . . . . . . . . . 454
434 WHAT TO DO IN EMERGENCIES
HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the switch bank below the climate controls. potential for overheating your engine by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional On the highways slow down. turn signals will flash on and off to warn oncoming In city traffic while stopped, put transmission in traffic of an emergency. Press the switch a second time to NEUTRAL, but do not increase engine idle speed. turn off the Hazard Warning flashers. This is an emergency warning system and it should not be used when the vehicle is in motion. Use it when your vehicle is disabled and it is creating a safety hazard for other motorists. When you must leave the vehicle to seek assistance, the Hazard Warning flashers will continue to operate even though the ignition is placed in the OFF position. NOTE: With extended use the Hazard Warning flashers may wear down your battery.
CAUTION!
Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads H, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the H and you hear continuous chimes, turn the engine off immediately and call for service.
WHAT TO DO IN EMERGENCIES 435
NOTE: There are steps that you can take to slow down JACKING AND TIRE CHANGING an impending overheat condition: If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help remove this heat. You can also turn the temperature control to maximum heat, the mode control to floor and the blower control to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system.
WARNING!
Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. Never start or run the engine while the vehicle is on a jack. (Continued)
WARNING!
You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack Location The scissor-type jack and tire changing tools are located in the cargo compartment behind a trim cover on the left rear trim panel. The latch is located at the bottom of the trim cover.
Jack Storage Location
Spare Tire Stowage The spare tire is stowed underneath the rear of the vehicle and is held in place by a cable winch mechanism.
Spare Tire Removal Fit the jack handle extension over the drive nut located in the rear cargo area inside the vehicle. Use the lug wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle.
CAUTION!
The winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and they can damage the winch. When the spare is clear, tilt the retainer at the end of the cable, and pull it through the center of the wheel. NOTE: Refer to Compact Spare Tire under TiresGeneral Information in Starting And Operating for information about the compact spare tire, its use, and operation.
Lowering/Raising Spare Tire
Preparations For Jacking
1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery 5. Turn the ignition to the LOCK position. areas. 6. Block both the front and rear of the wheel diagonally opposite of the jackWARNING! ing position. For example, if changing the right front tire, block the left rear Do not attempt to change a tire on the side of the wheel. vehicle close to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. 2. Turn on the Hazard Warning flasher. 3. Set the parking brake.
4. Place the shift lever into PARK (automatic transmission) or REVERSE (manual transmission).
Jacking Instructions
Do not let anyone sit in the vehicle when it is on a jack. Do not get under the vehicle when it is on a jack. Only use the jack in the positions indicated and for lifting this vehicle during a tire change. If working on or near a roadway, be extremely careful of motor traffic.
WARNING!
Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. Turn on the Hazard Warning flasher. Block the wheel diagonally opposite the wheel to be raised. Set the parking brake firmly and set an automatic transmission in PARK; a manual transmission in REVERSE. Never start or run the engine with the vehicle on a jack. (Continued)
Jack Warning Label
CAUTION!
Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove spare tire. 2. Remove jack and tools from mounting bracket. Assemble the tools by connecting the driver to the extension, and then to the lug wrench. 3. Loosen (but do not remove) the wheel lug nuts by Front Jacking Location turning them to the left one turn while the wheel is still For the rear tires, place it under the axle by the wheel to on the ground. be changed. 4. Locate the jack as shown. For the front tires, place it (rearward) of the notch on the body weld seam behind wheel to be changed.
5. Raise the vehicle by turning the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability.
WARNING!
Raising the vehicle higher than necessary can make the vehicle less stable and cause a collision. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
Rear Jacking Location
6. Remove the lug nuts and wheel.
Position the jack handle on the jack. Do not raise the 7. Position the spare wheel/tire on the vehicle and install vehicle until you are sure the jack is fully engaged. lug nuts with the cone-shaped end toward the wheel. Lightly tighten the nuts.
CAUTION!
Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly.
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. 8. Lower the vehicle by turning the jack screw to the left, and remove the jack. 9. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice. The correct wheel nut tightness is 95 ft lb (130 Nm). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 10. Lower the jack to its fully closed position.
Mounting Spare Tire
11. Secure the tire, jack, and tools in their proper locations.
WARNING!
A loose tire or jack, thrown forward in a collision or hard stop, could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. 12. Remove blocks from wheels. Road Tire Installation
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle is lowered to the ground. 3. Lower the vehicle to the ground by turning the jack handle counterclockwise.
4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased 1. Mount the road tire on the axle. leverage. Tighten the lug nuts in a star pattern until each 2. Install the remaining lug nuts with the cone shaped nut has been tightened twice. The correct tightness of end of the nut toward the wheel. Lightly tighten the lug each lug nut is 95 ft/lbs (130 Nm). If in doubt about the nuts. correct tightness, have them checked with a torque wrench by your authorized dealer or service station. 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly seated against the wheel.
JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury. pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. Preparations For Jump-Start The battery in your vehicle is located in the front of the NOTE: When using a portable battery booster pack engine compartment, behind the left headlight assembly. follow the manufacturers operating instructions and precautions. NOTE: The positive battery post is covered with a protective cap. Lift up on the cap to gain access to the CAUTION! positive battery post. Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur.
WARNING!
Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive. Keep open flames or sparks away from the battery. 1. Set the parking brake, shift the automatic transmission into PARK (manual transmission in NEUTRAL) and turn the ignition to LOCK. 2. Turn off the heater, radio, and all unnecessary electrical accessories.
Positive Battery Post
3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF.
CAUTION!
Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery. 3. Connect the negative end (-) of the jumper cable to the negative (-) post of the booster battery. 4. Connect the opposite end of the negative (-) jumper cable to a good engine ground (exposed metal part of the discharged vehicles engine) away from the battery and the fuel injection system.
WARNING!
Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure
WARNING!
Failure to follow this procedure could result in personal injury or property damage due to battery explosion.
WARNING!
Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury.
8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the discharged vehicle.
If frequent jump-starting is required to start your vehicle you should have the battery and charging system in5. Start the engine in the vehicle that has the booster spected at your authorized dealer. battery, let the engine idle a few minutes, and then start CAUTION! the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: 6. Disconnect the negative (-) jumper cable from the engine ground of the vehicle with the discharged battery. 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. Accessories that can be plugged into the vehicle power outlets draw power from the vehicles battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicles battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with Traction ConIf your vehicle becomes stuck in mud, sand or snow, it trol or Electronic Stability Control (ESC), turn the system can often be moved by a rocking motion. Turn your OFF before attempting to rock the vehicle. steering wheel right and left to clear the area around the CAUTION! front wheels. Then shift back and forth between DRIVE and REVERSE. Using minimal accelerator pedal pressure When rocking a stuck vehicle by moving beto maintain the rocking motion, without spinning the tween DRIVE and REVERSE, do not spin the wheels, is most effective. wheels faster than 15 mph (24 km/h), or drivetrain damage may result. CAUTION! Revving the engine or spinning the wheels too fast Racing the engine or spinning the wheels may lead to may lead to transmission overheating and failure. transmission overheating and failure. Allow the enIt can also damage the tires. Do not spin the gine to idle with the shift lever in NEUTRAL for at wheels above 30 mph (48 km/h) while in gear (no least one minute after every five rocking-motion transmission shifting occurring). cycles. This will minimize overheating and reduce the risk of transmission failure during prolonged efforts to free a stuck vehicle.
WARNING!
Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicles wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
SHIFT LEVER OVERRIDE If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: 1. Firmly apply the parking brake. 2. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the PRNDL bezel. 3. Turn the ignition to the ON/RUN position without starting the engine (engine Off).
4. Press and maintain firm pressure on the brake pedal. 6. Move the shift lever to the NEUTRAL position. 5. Using a screwdriver, reach into the opening and press 7. The vehicle may then be started in NEUTRAL. and hold the shift override lever down. 8. Reinstall the shift lever override access cover. TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service. If the transmission and drivetrain are operable, disabled vehicles may also be towed as described under Recreational Towing in the Starting And Operating section.
Shift Lever Override Access
Towing Condition
Wheels OFF the Ground
2WD Models
4WD Models See instructions in Recreational Towing under Starting and Operating Transmission in PARK Transfer Case in NEUTRAL Tow in forward direction NOT ALLOWED NOT ALLOWED BEST METHOD
If transmission is operable: Flat Tow NONE Transmission in NEUTRAL 30 mph max speed(48 km/h) 15 miles (24 km) max distance Wheel Lift or Dolly Tow Flatbed Front Rear ALL OK BEST METHOD
Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equipment manufacturers instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to
main structural members of the vehicle, not to bumpers or associated brackets. State and local laws applying to vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be in the ON/RUN position, not the ACC position.
If the vehicles battery is discharged, refer to Shift Lever Override in What To Do In Emergencies for instructions on shifting the automatic transmission out of the PARK position for towing.
CAUTION!
Do not attempt to use sling type equipment when towing. When securing the vehicle to a flat bed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. If the vehicle being towed requires steering, the ignition must be in the ON/RUN or ACC position, not in the LOCK/OFF position.
Towing Without The Ignition Key Fob Special care must be taken when the vehicle is towed with the ignition in the LOCK/OFF position. The only approved method of towing without the ignition key is with a flatbed truck. Proper towing equipment is necessary to prevent damage to the vehicle. Two-Wheel Drive Models The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. If flatbed equipment is not available, and the transmission is operable, the vehicle may be towed (with rear wheels on the ground) with the transmission in NEUTRAL. Speed must not exceed 30 mph (48 km/h) and the distance must not exceed 15 miles (24 km).
CAUTION!
Towing faster than 30 mph (48 km/h) or farther than 15 miles (24 km) with rear wheels on the ground can cause severe damage to the transmission. Such damage is not covered by the New Vehicle Limited Warranty. If the transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 miles (24 km), tow with the rear wheels OFF the ground (on a flatbed, or with the rear wheels raised using a wheel lift or towing dolly), or remove the driveshaft.
WARNING!
If the driveshaft is removed, the vehicle can roll even if the transmission is in PARK, which could cause serious injury or death. The parking brake must be firmly engaged and the wheels chocked during driveshaft removal and installation. The parking brake must remain engaged unless the vehicle is securely and properly connected to the tow vehicle, or the driveshaft is completely reinstalled. See your authorized dealer for proper driveshaft removal and reinstallation procedures, including flange orientation/alignment, use of thread-locking compound, proper bolt torque specifications, etc.
Four-Wheel Drive Models The manufacturer recommends towing with all wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of vehicle raised and the opposite end on a towing dolly. If flatbed equipment is not available, and the transfer case is operable, the vehicle may be towed (in the forward direction, with ALL wheels on the ground), IF the transfer case is in NEUTRAL and the transmission is in PARK. Refer to Recreational Towing in Starting And Operating for detailed instructions.
CAUTION!
Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when towing. Failure to follow these towing methods can cause severe damage to the transmission and/or transfer case. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE

CONTENTS
Engine Compartment 3.7L . . . . . . . . . . . . . 457 Onboard Diagnostic System OBD II . . . . . . 458 Loose Fuel Filler Cap Message . . . . . . . . . . . 458 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459 Replacement Parts . . . . . . . . . . . . . . . . . . . . . 461 Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . 461 Maintenance Procedures . . . . . . . . . . . . . . . . . 461 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 462 Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 465 Engine Air Cleaner Filter . . . . . . . . . . . . . . . 465 Maintenance-Free Battery . . . . . . . . . . . . . . 466 Air Conditioner Maintenance . . . . . . . . . . . . 467 A/C Air Filter If Equipped . . . . . . . . . . . . 468 Body Lubrication . . . . . . . . . . . . . . . . . . . . 468 Windshield Wiper Blades . . . . . . . . . . . . . . . 469 Adding Washer Fluid . . . . . . . . . . . . . . . . . 470 Exhaust System . . . . . . . . . . . . . . . . . . . . . 470
456 MAINTAINING YOUR VEHICLE
Cooling System . . . . . . . . . . . . . . . . . . . . . 473 Brake System . . . . . . . . . . . . . . . . . . . . . . . 478 Automatic Transmission . . . . . . . . . . . . . . . 480 Transfer Case . . . . . . . . . . . . . . . . . . . . . . . 482 Front/Rear Axle Fluid . . . . . . . . . . . . . . . . . 483 Sky Slider Top Care . . . . . . . . . . . . . . . . . 484 Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . 486 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492 Totally Integrated Power Module . . . . . . . . . 492 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 498
Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 499 Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 499 Front Turn Signal And Front Side Marker Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . 500 Rear Tail/Stop, Turn Signal, And Back-Up Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . 502 Fluids, Lubricants, And Genuine Parts . . . . . . . 503 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503 Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . 504
MAINTAINING YOUR VEHICLE 457
ENGINE COMPARTMENT 3.7L
7
1 2 3 4 5 Air Cleaner Filter Engine Oil Dipstick Brake Fluid Reservoir Integrated Power Module (Fuses) Battery 6 7 8 9 Washer Fluid Reservoir Engine Coolant Reservoir Engine Oil Fill Coolant Pressure Cap
ONBOARD DIAGNOSTIC SYSTEM OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations. If any of these systems require service, the OBD II system will turn on the Malfunction Indicator Light (MIL). It will also store diagnostic codes and other information to assist your service technician in making repairs. Although your vehicle will usually be drivable and not need towing, see your authorized dealer for service as soon as possible.
CAUTION!
Prolonged driving with the MIL on could cause further damage to the emission control system. It could also affect fuel economy and drivability. The vehicle must be serviced before any emissions tests can be performed. If the MIL is flashing while the engine is running, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a gASCAP message will display in the odometer or a CHECK gASCAP message will be displayed in the Electronic Vehicle Information Center (EVIC). Refer to
For states that require an Inspection and MainteElectronic Vehicle Information Center (EVIC) in Unnance (I/M), this check verifies the Malfunction derstanding Your Instrument Panel for further informaIndicator Light (MIL) is functioning and is not tion. Tighten the gas cap until a clicking sound is heard. This is an indication that the gas cap is properly tight- on when the engine is running, and that the OBD II system is ready for testing. ened. Press the odometer reset button to turn the message off. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Resolving the problem will turn the MIL light off. Normally, the OBD II system will be ready. The OBD II system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacement. If the OBD II system should be determined not ready for the I/M test, your vehicle may fail the test.
Your vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. To EMISSIONS INSPECTION AND MAINTENANCE check if your vehicles OBD II system is ready, you must PROGRAMS In some localities, it may be a legal requirement to pass do the following: an inspection of your vehicles emissions control system. 1. Turn the ignition switch to the ON position, but do not Failure to pass could prevent vehicle registration. crank or start the engine.
2. If you crank or start the engine, you will have to start If your OBD II system is not ready, you should see your this test over. authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, 3. As soon as you turn the ignition switch to the ON you may need to do nothing more than drive your position, you will see the MIL symbol come on as part of vehicle as you normally would in order for your OBD II a normal bulb check. system to update. A recheck with the above test routine 4. Approximately 15 seconds later, one of two things will may then indicate that the system is now ready. happen: Regardless of whether your vehicles OBD II system is a. The MIL will flash for about 10 seconds and then ready or not, if the MIL is illuminated during normal return to being fully illuminated until you turn OFF vehicle operation you should have your vehicle serviced the ignition or start the engine. This means that your before going to the I/M station. The I/M station can fail vehicles OBD II system is not ready and you should your vehicle because the MIL is on with the engine running. not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicles OBD II system is ready and you can proceed to the I/M station.
REPLACEMENT PARTS Use of genuine MOPAR parts for normal/scheduled maintenance and repairs is highly recommended to ensure the designed performance. Damage or failures caused by the use of non-MOPAR parts for maintenance and repairs will not be covered by the manufacturers warranty. DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself.
WARNING!
You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle.
Besides those maintenance items specified in the fixed maintenance schedule, there are other components which NOTE: Intentional tampering with emissions control may require servicing or replacement in the future. systems may void your warranty and could result in civil penalties being assessed against you.
CAUTION!
Failure to properly maintain your vehicle or perform repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle performance. Immediately have potential malfunctions examined by an authorized Chrysler Group LLC dealership or qualified repair center. Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty. If a flush is needed because of component malfunction, use only the specified fluid for the flushing procedure.
Engine Oil Checking Oil Level To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed up engine is shut off. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings. Always maintain the oil level within the SAFE zone on the dipstick. Adding 1 quart (0.9 L) of oil when the reading is at the bottom of the SAFE zone will result in a reading at the top of the safe zone on these engines.
CAUTION!
Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage your engine.
Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer recommends engine oils that are API Certified and meet the requirements of Chrysler Material Standard MS-6395.
American Petroleum Institute (API) Engine Oil Change Engine Oil Identification Symbol The oil change indicator system will remind you that it is This symbol means that the oil has time to take your vehicle in for scheduled maintenance. been certified by the American Refer to the Maintenance Schedule for further informaPetroleum Institute (API). The tion. manufacturer only recommends API Certified engine oils. NOTE: Under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first.
CAUTION!
Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. Engine Oil Viscosity SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to Engine Compartment in Maintaining Your Vehicle for further information.
Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. Materials Added To Engine Oil Do not add any supplemental additives, other than leak detection dyes, to your engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental additives.
Disposing Of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the Lubricants which do not have both the engine oil certienvironment. Contact your authorized dealer, service fication mark and the correct SAE viscosity grade numstation, or governmental agency for advice on how and ber should not be used. where used oil and oil filters can be safely discarded in your area.
Engine Oil Filter The engine oil filter should be replaced with a new filter at every engine oil change. NOTE: For best access to the oil filter, a drive on hoist should be used instead of a chassis hoist (3.7L Only).
WARNING!
The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
Engine Oil Filter Selection All of this manufacturers engines have a full-flow type disposable oil filter. Use a filter of this type for replacement. The quality of replacement filters varies considerably. Only high-quality filters should be used to assure most efficient service. MOPAR engine oil filters are high-quality oil filters and are recommended. Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters Engine Air Cleaner Filter varies considerably. Only high quality filters should be Refer to the Maintenance Schedule for the proper used to assure most efficient service. MOPAR engine air maintenance intervals. cleaner filters are a high quality filter and are NOTE: Be sure to follow the dusty or off-road condi- recommended. tions maintenance interval if applicable.
Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required.
Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other. Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling.
WARNING!
Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. Refer to Jump-Starting Procedures in What To Do In Emergencies for further information. (Continued)
CAUTION!
It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. If a fast charger is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery. Do not use a fast charger to provide starting voltage.
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time.
CAUTION!
Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty.
WARNING!
Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Warranty Information Book, located on the DVD, for further warranty information. The air conditioning system contains refrigerant under high pressure. To avoid risk of personal injury or damage to the system, adding refrigerant or any repair requiring lines to be disconnected should be done by an experienced technician.
Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by an authorized dealer or other service facilities using recovery and recycling equipment. NOTE: Use only manufacturer approved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compressor Oil, and Refrigerants. A/C Air Filter If Equipped Refer to the Maintenance Schedule for the proper maintenance intervals.
WARNING!
Do not remove the A/C Air Filter while the blower is operating or personal injury may result.
Refrigerant Recovery And Recycling Body Lubrication R-134a air conditioning refrigerant is a hydrofluoro- Locks and all body pivot points, including such items as carbon (HFC) that is endorsed by the Environmental seat tracks, door hinge pivot points and rollers, liftgate,
tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR Spray White Lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant, such as MOPAR Lock Cylinder Lubricant or equivalent, directly into the lock cylinder.
Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer solvent. This will remove accumulations of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary.
Adding Washer Fluid WARNING! The windshield and rear window washers share the same fluid reservoir. The fluid reservoir is located in the front Commercially available windshield washer solvents of the engine compartment. Be sure to check the fluid are flammable. They could ignite and burn you. Care level in the reservoir at regular intervals. Fill the reservoir must be exercised when filling or working around with windshield washer solvent (not radiator antifreeze) the washer solution. and operate the system for a few seconds to flush out the residual water. Exhaust System The best protection against carbon monoxide entry into When refilling the washer fluid reservoir, take some the vehicle body is a properly maintained engine exhaust washer fluid and apply it to a cloth or towel and wipe system. clean the wiper blades, this will help blade performance. If you notice a change in the sound of the exhaust system; To prevent freeze-up of your windshield washer system or if the exhaust fumes can be detected inside the vehicle; in cold weather, select a solution or mixture that meets or or when the underside or rear of the vehicle is damaged; exceeds the temperature range of your climate. This have an authorized technician inspect the complete exrating information can be found on most washer fluid haust system and adjacent body areas for broken, damcontainers. aged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep
into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required.
CAUTION!
The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and vehicle.
WARNING!
Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to Safety Tips/Exhaust Gas in Things To Know Before Starting Your Vehicle for further information. A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion. NOTE: Intentional tampering with emissions control Do not try to start the engine by pushing or towing the systems can result in civil penalties being assessed vehicle. against you. Do not idle the engine with any spark plug wires In unusual situations involving grossly malfunctioning disconnected or removed, such as when diagnostic engine operation, a scorching odor may suggest severe testing, or for prolonged periods during very rough and abnormal catalyst overheating. If this occurs, stop idle or malfunctioning operating conditions. the vehicle, turn off the engine and allow it to cool. Service, including a tune-up to manufacturers specifications, should be obtained immediately.
Cooling System
WARNING!
You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Engine Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the front of the A/C condenser (if equipped) or radiator for any
accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the A/C condenser (if equipped) or the back of the radiator core. Check the engine cooling system hoses for brittle rubber, cracking, tears, cuts, and tightness of the connection at the coolant recovery bottle and radiator. Inspect the entire system for leaks. With the engine at normal operating temperature (but not running), check the cooling system pressure cap for proper vacuum sealing by draining a small amount of engine coolant (antifreeze) from the radiator drain cock. If the cap is sealing properly, the engine coolant (antifreeze) will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT.
Cooling System Drain, Flush, And Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze). Refer to the Maintenance Schedule for the proper maintenance intervals. Selection Of Engine Coolant Use only the manufacturers recommended engine coolant (antifreeze). Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information.
CAUTION!
Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. If a non-HOAT engine coolant (antifreeze) is introduced into the cooling system in an emergency, it should be replaced with the specified engine coolant (antifreeze) as soon as possible. Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator.
This vehicle has not been designed for use with Propylene Glycol based engine coolant (antifreeze). Use of Propylene Glycol based engine coolant (antifreeze) is not recommended.
Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze). When adding engine coolant (antifreeze): The manufacturer recommends using MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
Adding Engine Coolant Your vehicle has been built with an improved engine Mix a minimum solution of 50% HOAT engine coolant coolant (antifreeze) that allows extended maintenance and distilled water. Use higher concentrations (not to intervals. This engine coolant (antifreeze) can be used up exceed 70%) if temperatures below 34F (37C) are to five years or 104,000 miles (169 000 km) before anticipated. replacement. To prevent reducing this extended maintenance period, it is important that you use the same Use only high purity water such as distilled or deionized water when mixing the water/engine coolant engine coolant (antifreeze) throughout the life of your (antifreeze) solution. The use of lower quality water vehicle. will reduce the amount of corrosion protection in the engine cooling system.
Please note that it is the owners responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent coolant changes. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of coolant, and to ensure that coolant will return to the radiator from the coolant recovery bottle. The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces.
WARNING!
The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. Do not use a pressure cap other than the one specified for your vehicle. Personal injury or engine damage may result.
Disposal Of Used Engine Coolant Used ethylene glycol based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. Engine Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. With the engine idling, and warm to normal operating temperature, the level of the engine coolant (antifreeze) in the bottle should be between the ranges indicated on the bottle.
The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for coolant freeze point or replacing engine coolant (antifreeze). Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is normally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vaporized when the thermostat opens, allowing hot engine coolant (antifreeze) to enter the radiator.
If an examination of your engine compartment shows no Make sure that the radiator and coolant recovery evidence of radiator or hose leaks, the vehicle may be bottle hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. Keep the front of the radiator clean. If your vehicle is Do not overfill the coolant bottle. equipped with air conditioning, keep the front of the condenser clean. Check coolant freeze point in the radiator and in the coolant recovery bottle. If engine coolant (antifreeze) Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install needs to be added, contents of coolant recovery bottle ONLY the correct type thermostat. Other designs may must also be protected against freezing. result in unsatisfactory cooling performance, poor gas If frequent engine coolant (antifreeze) additions are mileage, and increased emissions. required, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling Brake System In order to assure brake system performance, all brake system should be pressure tested for leaks. system components should be inspected periodically. Maintain engine coolant (antifreeze) concentration at Refer to the Maintenance Schedule for the proper 50% HOAT engine coolant (antifreeze) (minimum) maintenance intervals. and distilled water for proper corrosion protection of your engine, which contains aluminum components.
WARNING!
Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. Brake Master Cylinder The fluid in the master cylinder should be checked when performing under hood services or immediately if the Brake Warning Light is illuminated. Be sure to clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. With disc brakes, fluid level can be expected to fall as the brake pads wear. Brake fluid level
should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed. Use only manufacturers recommended brake fluid. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information.
WARNING!
Use only manufacturers recommended brake fluid. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir. (Continued)
To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts, causing the brake fluid to catch fire. Brake fluid can also damage painted and vinyl surfaces, care should be taken to avoid its contact with these surfaces.
Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Automatic Transmission
Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only manufacturers recommended transmission fluid. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended (Continued) fluid.
CAUTION!
Using a transmission fluid other than the manufacturers recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturers recommended fluid will require more frequent fluid and filter changes. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information. Special Additives The manufacturer strongly recommends against the addition of any additives to the transmission. The only exception to this policy is the use of special dyes to aid in detecting fluid leaks. The use of transmission sealers should be avoided as they may adversely affect seals.
CAUTION!
Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty. Fluid Level Check Your vehicle is equipped with a capped transmission oil fill tube that is sealed and it should not be tampered with. Your authorized dealer has the proper tools to ensure that the fluid level is set properly.
CAUTION!
Using a transmission fluid other than the manufacturers recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter changes. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further information. Fluid And Filter Changes Refer to the Maintenance Schedule for the proper maintenance intervals. In addition, change the fluid and filter if the transmission is disassembled for any reason.
Transfer Case Fluid Level Check The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position.
1 Fill Plug 2 Drain Plug
Adding Fluid Frequency Of Fluid Change Fluid should be added only to fill hole until fluid begins Under normal operating conditions, the fluid installed at to run out of the hole. the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary unless the Draining Fluid fluid becomes contaminated with water. Change the fluid First remove the fill plug (1), then the drain plug (2). immediately if contaminated with water. Recommended tightening torque for the drain and fill Front/Rear Axle Fluid plugs is 1525 ft lbs (2034 Nm). For normal service, periodic fluid level checks are not CAUTION! required. When the vehicle is serviced for other reasons the exterior surfaces of the axle assembly should be Do not over-tighten the plugs. You could damage inspected. If gear oil leakage is suspected inspect the them and cause a leak. fluid level. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Your Vehicle for further informaLubricant Selection tion. Use only manufacturers recommended fluid. Refer to Fluids, Lubricants, and Genuine Parts in Maintaining Fluid Level Check Your Vehicle for further information. Front axle lubricant should be at the bottom edge of the oil fill hole when the vehicle is in a level position.
Rear axle lubricant should be 0.5 in (11 mm) below the Sky Slider Top Care bottom edge of the oil fill hole when the vehicle is in a Immediate removal of any contaminant is recommended. Regular washing of the top will enhance its life and level position. appearance, and make successive cleaning easier. Do not Adding Fluid subject the top to excessive heat. Frequently vacuum the Add lubricant only at the fill hole and only to the level top and tracks. Periodically wipe dust and dirt from the specified above. top and inside of the tracks by hand with an alcohol Lubricant Selection dampened cloth. Use only manufacturers recommended lubricant. Refer Washing to Fluids, Lubricants, and Genuine Parts in MaintainHand washing or an automatic car wash with a soft cloth ing Your Vehicle for further information. system is preferred. Frequency Of Fluid Change CAUTION! Under normal operating conditions, the lubricant installed at the factory will give satisfactory lubrication for Avoid pointing a high-pressure hand held spray the life of the vehicle. Lubricant changes are not neceswand directly at the sides of the top, as this can sary unless the lubricant becomes contaminated with damage the seal and force water past the weather water. Change the lubricant immediately if contaminated strips. with water.
General Cleaning Allow the top to dry before opening. Vacuuming the Careful vacuuming of the top before washing is helpful top with a wet/dry shop vacuum will decrease the in removing dust and other foreign particles. tops drying time, ensure removal of all dirt, and delete streaks in the material. If Hand Washing: Multiple cleanings may be necessary to remove stub Wash in partial shade instead of direct sun. born stains. If stains persist, contact your local autho Wet the entire vehicle before washing the top. rized dealership for further suggestions. Wash the top with a soft, natural bristle scrub brush, and a mild soap solution such as liquid dish washing soap. Do not use detergent. Scrub in all directions, covering an area of about two square feet at a time. Avoid heavy scrubbing.
CAUTION!
Never use an abrasive type cleaner or bleaches. Cleaners should not contain silicones, organic solvents, petroleum distillates, or plasticizers. Always wait until the top is thoroughly dry before opening it.
Rinse the entire vehicle with water to remove all soap and dirt from the top fabric and to prevent streaking on painted and chrome surfaces. Additional Cleaning Procedure For additional cleaning assistance in removing stubborn stains, apply MOPAR Convertible Cloth Top Cleaner or
equivalent to the complete stain, extending 2 in (50 mm) beyond the stain. With a soft bristle brush, scrub in all directions over the stain. Avoid heavy scrubbing. Rinse the area with warm water. If the stain is still apparent, repeat the cleaning procedure. When the stain is no longer showing, rinse the complete top with warm water. Let the top dry before opening it.
Weather Strip Care Lubricate the weather strips periodically with MOPAR Weather Strip Lubricant or equivalent, to keep them soft and pliable. Appearance Care And Protection From Corrosion
Protection Of Body And Paint From Corrosion Vehicle body care requirements vary according to geoProtection graphic locations and usage. Chemicals that make roads For appearance purposes, you may wish to protect the passable in snow and ice and those that are sprayed on acrylic (cloth) top periodically. A fabric protectant such as trees and road surfaces during other seasons are highly Scotchguard is suggested. The top should be clean and corrosive to the metal in your vehicle. Outside parking, dry before application of the protectant. which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme CAUTION! hot or cold weather and other extreme conditions will Avoid getting Scotchguard on the surrounding have an adverse effect on paint, metal trim, and underweather strips, moldings, paint, or glass. Damage to body protection. these items might occur.
The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion Wash your vehicle regularly. Always wash your veresistance built into your vehicle. hicle in the shade using MOPAR Car Wash or equivaWhat Causes Corrosion? lent, or a mild car wash soap, and rinse the panels Corrosion is the result of deterioration or removal of completely with clear water. paint and protective coatings from your vehicle. If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR Super Kleen Bug The most common causes are: and Tar Remover or equivalent to remove. Road salt, dirt, and moisture accumulation. Use a high quality cleaner wax, such as MOPAR Stone and gravel impact. Cleaner Wax or equivalent, to remove road film, stains, Insects, tree sap, and tar. and to protect your paint finish. Take care never to scratch the paint. Salt in the air near seacoast localities. Avoid using abrasive compounds and power buffing Atmospheric fallout/industrial pollutants. that may diminish the gloss or thin out the paint finish.
CAUTION!
Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Special Care
If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner. If your vehicle is damaged due to a collision or similar cause, which destroys the paint and protective coating, have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibility of the owner.
If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., assure that such materials are well If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once If a lot of driving is done on gravel roads, consider a month. mud or stone shields behind each wheel. It is important that the drain holes in the lower edges of the doors, rocker panels, and tailgate must be kept Use MOPAR Touch Up Paint or equivalent on scratches or chips as soon as possible. Your authorized clear and open. dealer has touch up paint to match the color of your vehicle.
Wheel And Wheel Trim Care
Stain Repel Fabric Cleaning Procedure If Equipped All wheels and wheel trim, especially aluminum and Stain Repel seats may be cleaned in the following manchrome plated wheels, should be cleaned regularly ner: with a mild soap and water to prevent corrosion. Remove as much of the stain as possible by blotting To remove heavy soil and/or excessive brake dust, use with a clean, dry towel. MOPAR Wheel Cleaner or equivalent or select a Blot any remaining stain with a clean, damp towel. non-abrasive, non-acidic cleaner.
CAUTION!
Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use oven cleaner. These products may damage the wheels protective finish. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheels protective finish. Only MOPAR Wheel Cleaner or equivalent is recommended.
For tough stains, apply MOPAR Total Clean or equivalent, or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove soap residue. For grease stains, apply MOPAR Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove soap residue. Do not use any harsh solvents or any other form of protectants on Stain Repel products.
Interior Care Instrument Panel Cover The instrument panel cover has a low glare surface, which minimizes reflections in the windshield. Do not use protectants or other products, which may cause undesirable reflections. Use soap and warm water to restore the low glare surface. Cleaning Interior Trim Clean interior trim with a damp cloth and MOPAR Total Clean or equivalent, and if necessary, follow with MOPAR Spot & Stain Remover or equivalent. Do not use harsh cleaners or Armor All. Use MOPAR Total Clean or equivalent to clean vinyl upholstery. Cleaning Leather Upholstery MOPAR Total Clean or equivalent is specifically recommended for leather upholstery.
Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR Total Clean or equivalent. Care should be taken to avoid soaking leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean leather upholstery. Application of a leather conditioner is not required to maintain the original condition.
WARNING!
Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
quarter window equipped with the radio antenna. Do Cleaning Headlights Your vehicle has plastic headlights that are lighter and not use scrapers or other sharp instruments, which may less susceptible to stone breakage than glass headlights. scratch the elements. Plastic is not as scratch resistant as glass and therefore When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner different lens cleaning procedures must be followed. directly on the mirror. To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To Cleaning Plastic Instrument Cluster Lenses remove road dirt, wash with a mild soap solution fol- The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care lowed by rinsing. must be taken to avoid scratching the plastic. Do not use abrasive cleaning components, solvents, steel 1. Clean with a wet soft rag. A mild soap solution may be wool or other aggressive material to clean the lenses. used, but do not use high alcohol content or abrasive Glass Surfaces cleaners. If soap is used, wipe clean with a clean damp All glass surfaces should be cleaned on a regular basis rag. with MOPAR Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type 2. Dry with a soft cloth. cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear
Seat Belt Maintenance Do not bleach, dye, or clean the seat belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water. Dry with a soft cloth. Do not remove the seat belts from the car to wash them. Dry with a soft cloth. Replace the seat belts if they appear frayed or worn or if the buckles do not work properly. FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment near the battery. This center contains cartridge fuses, mini-fuses and relays. A label that identifies each component is printed on the inside of the cover.
Totally Integrated Power Module
Cavity Cartridge Fuse J1 J2 30 Amp Pink J3
MiniFuse
Description Transfer Case Module If Equipped
Cavity Cartridge Fuse J4 25 Amp Natural J5 25 Amp Natural J6 40 Amp Green
MiniFuse
Description Driver Door Node Passenger Door Node Antilock Brakes Pump/Stability Control System If Equipped Antilock Brakes Valve/Stability Control System If Equipped Power Seats If Equipped
J7
30 Amp Pink
J8 J9 J10
40 Amp Green
Cavity Cartridge Fuse J11 30 Amp Pink J12 J13 60 Amp Yellow J14 40 Amp Green J15 40 Amp Green J17 40 Amp Green J18 20 Amp Blue J19 60 Amp Yellow
MiniFuse
Description Thatchm Lock/ Unlock If Equipped Ignition Off Draw Rear Defroster If Equipped Front Blower Starter Solenoid Powertrain Control Module Radiator Fan
Cavity Cartridge Fuse J20 30 Amp Pink J21 20 Amp Blue J22 25 Amp Natural M1
MiniFuse 15 Amp Blue 20 Amp Yellow 20 Amp Yellow 10 Amp Red 25 Amp Natural
Description Front Wiper Front Washer/Rear Washer If Equipped Sunroof Module If Equipped Stop Light Switch Feed Rear Center Brake Lamp Trailer Lighting If Equipped Frt/Rr Axle Lockers If Equipped Trailer Tow If Equipped Power Inverter If Equipped
Cavity Cartridge Fuse M6 M7 M8 M9 M10
MiniFuse 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 15 Amp Blue
Description Rain Sensor If Equipped Cigar Lighter Front Heated Seats If Equipped Ignition Off Draw Vehicle Entertainment System, Satellite Digital Receiver, DVD, Hands Free Module, Radio, Antenna,Universal Garage Door Opener If Equipped/Vanity Light
M2 M3 M4 M5
Cavity Cartridge Fuse M11 M12 M13
MiniFuse 10 Amp Red 30 Amp Green 20 Amp Yellow
Description Climate Control System If Equipped Radio/Amplifier If Equipped Instrument Cluster/ Wireless Control Module/ Multifunction Control Switch, Siren If Equipped Trailer Tow (Export Only) If Equipped
Cavity Cartridge Fuse M15
MiniFuse 20 Amp Yellow
Description Instrument Cluster/ Rear View Mirror/ Tire Pressure Monitor/Transfer Case Module If Equipped/Glow Plugs If Equipped Airbag Module Exterior Lighting Left Front Park and Side Marker, Left Tail and Running, License Lights
M16 M17
M14
20 Amp Yellow
10 Amp Red 15 Amp Blue
MiniFuse 15 Amp Blue
Description Exterior Lighting Right Front Park and Side Marker, Right Tail and Running Lights Automatic Shutdown #1 and #2 Interior Lighting/ Steering Wheel Switches If Equipped/Switch Bank/Steering Column Module If Equipped Automatic Shutdown #3
Cavity Cartridge Fuse M22 M23 M24 M25
M19 M20
25 Amp Natural 15 Amp Blue
MiniFuse 10 Amp Red 10 Amp Red 25 Amp Natural 20 Amp Yellow 10 Amp Red 10 Amp Red
Description Right Horn (Hi/Low) Left Horn (Hi/Low) Rear Wiper If Equipped Fuel Pump, Diesel Lift Pump If Equipped Power Mirror Switch/ Driver Window Switch Ignition Switch/ Wireless Control Module/Steering Column Lock If Equipped
M26
M27
M21
20 Amp Yellow
Cavity Cartridge Fuse M28 M29 M30
MiniFuse 10 Amp Red 10 Amp Red 15 Amp Blue
Description Powertrain Control Module Occupant Classification Module Rear Wiper Module If Equipped/Power Folding Mirror If Equipped/Diagnostic Link Back-Up Lights Airbag Module Powertrain Control Module
MiniFuse 10 Amp Red
Description Park Assist Module If Equipped/Climate Control System Module If Equipped/ Compass Module If Equipped/Cabin Heater If Equipped/Diesel Rad Fan If Equipped Heated Mirrors If Equipped
M31 M32 M33
20 Amp Yellow 10 Amp Red 10 Amp Red
M35 M36
15 Amp Blue
MiniFuse 10 Amp Red
Description Antilock Brakes/ Stability Control System Module/Stop Light Switch/Fuel Pump Relay Door and Liftgate Lock/Unlock Motors
When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected. REPLACEMENT BULBS LIGHT BULBS Interior Bulb No. Cargo Lamp . . . . . . . . . . . . . . . . . . . . . . . . . TL2122 Overhead Console Lamp . . . . . . . . . . . . . PLW2142A Reading Lamp . . . . . . . . . . . . . . . . . . . . . . WL2122
M38
25 Amp Natural
CAUTION!
When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure. (Continued)
LIGHT BULBS Exterior Bulb No. Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 9008 H13 Front Park/Turn Signal Lamp . . . . . . . . . . . . . 3757AK Front Side Marker Lamp . . . . . . . . . . . . . . . . . . . 168 Back-Up Lamp . . . . . . . . . . . . . . . . . . . . . . . . 3157K Center High Mounted Stop Lamp (CHMSL) . . . . . LED (serviced at an authorized dealer) Fog Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . H10 9145 License Plate Lamp . . . . . . . . . . . . . . . . . . . . . . . 168 Rear Tail/Stop . . . . . . . . . . . . . . . . . . . . . . . . . 3157K Rear Turn Signal Lamp . . . . . . . . . . . . . . . . . 3757AK BULB REPLACEMENT Headlamp 1. Open the hood.
3. Firmly grasp the lock ring and rotate it counterclockwise to unlock it. 4. Remove the bulb and connector assembly from the headlamp housing. 5. Disconnect the bulb from the electrical connector and then connect the replacement bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
6. Install the bulb and connector assembly into the headlamp housing and rotate the lock ring clockwise to 2. Reach behind the headlamp housing to access the lock it in place. headlamp bulb lock ring. 7. Close the hood.
Front Turn Signal And Front Side Marker Lamp
Front Fog Lamp
1. Turn the steering wheel all the way to the right to 1. Open the hood. access the left front turn signal or side marker. Turn the 2. Reach behind the headlamp housing to access the steering wheel all the way to the left to access the right bulb. front turn signal or side marker. 3. Rotate the bulbs socket counterclockwise, and remove 2. Remove three push-pins from the wheel-well liner. the bulb and socket assembly from the fog lamp housing. 3. Gently flex the wheel-well liner forward to access the 4. Pull the bulb out of the socket and insert the replacebulb. ment bulb. 4. Rotate the bulbs socket counterclockwise, and remove CAUTION! the bulb and socket assembly from the housing. 5. Pull the bulb out of the socket and insert the replacement bulb. 6. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place. 7. Reposition the wheel-well liner and install the push-pins. Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
5. Install the bulb and socket assembly into the into the fog lamp housing, and rotate the connector clockwise to lock it in place. 6. Close the hood. Rear Tail/Stop, Turn Signal, And Back-Up Lamp 1. Open the liftgate. 2. Remove the screws that fasten the taillamp housing to the vehicle.
3. Pull the taillamp housing straight back to separate it from the vehicle. 4. Disconnect the electrical connector. 5. Remove the two screws that fasten the back plate to the taillamp housing. 6. Separate the back plate from the taillamp housing.
7. Pull the appropriate bulb(s) out of the back plate and 9. Connect the electrical connector. insert the replacement bulb(s). 10. Install the taillamp housing and screws. 8. Install the back plate and screws into the taillamp 11. Close the liftgate. housing. FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 3.7 Liter Engine (SAE 5W-20, API Certified) Cooling System * 3.7 Liter Engine (MOPAR Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 19.5 Gallons 5 Quarts 14 Quarts Metric 73.8 Liters 4.7 Liters 13.3 Liters
FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Fluid, Lubricant, or Genuine Part MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. MOPAR Engine Oil Filter or equivalent. ZFR6F-11G (Gap 0.043 in [1.1 mm]) 87 Octane
Engine Oil Filter Spark Plugs Fuel Selection
Chassis Component Automatic Transmission Transfer Case Front Axle Rear Axle Brake Master Cylinder Fluid, Lubricant, or Genuine Part MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. SAE 80W-90 Multi-Purpose Type, GL-5 Gear Lubricant or equivalent. SAE 75W-90 Gear Lubricant or equivalent. MOPAR DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. MOPAR Power Steering Fluid +4, MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product.
Power Steering Reservoir
MAINTENANCE SCHEDULES
CONTENTS
Maintenance Schedule . . . . . . . . . . . . . . . . . . 506 Required Maintenance Intervals . . . . . . . . . . 508
M A I N T E N A N C E S C H E D U L E S
M A I N T E N A N C E
506 MAINTENANCE SCHEDULES
C H E D U L E S On
MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
On Non-EVIC equipped vehicles, Change Oil will flash in the instrument cluster odometer and a single chime will sound, indicating that an oil change is necessary.
Based on engine operation conditions, the oil change indicator message will illuminate. This means that service is required for your vehicle. Operating conditions such as frequent short-trips, trailer tow, extremely hot or cold ambient temperatures, and E85 fuel usage will influence when the Change Oil message is displayed. Your vehicle is equipped with an automatic oil change Depending on operating conditions, the message may indicator system. The oil change indicator system will appear as early as 3,500 miles (5 630 km) since last reset. remind you that it is time to take your vehicle in for Have your vehicle serviced as soon as possible, within scheduled maintenance. the next 500 miles (805 km). Electronic Vehicle Information Center (EVIC) equipped vehicles, Oil Change Required will be displayed in the EVIC and a single chime will sound, indicating that an oil change is necessary.
MAINTENANCE SCHEDULES 507 M
NOTE: The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated.
referring to the steps described under Electronic Vehicle Information Center (EVIC)/Oil Change Required in Understanding Your Instrument Panel or under Instrument Cluster Description/Odometer/Trip Odometer in Understanding Your Instrument Panel for further information.
Change your engine oil more often if you drive your At Each Stop For Fuel vehicle off-road for an extended period of time. Check the engine oil level about five minutes after a Under no circumstances should oil change intervals fully warmed engine is shut off. Checking the oil level exceed 8,000 miles (13 000 km) or six months, whichwhile the vehicle is on level ground will improve the ever comes first. accuracy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark. Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change. If a Check the windshield washer solvent and add if required. scheduled oil change is performed by someone other than your authorized dealer, the message can be reset by
A I N T E N A N C E S C H E D U L E S
M A I N T E N A N C E
508 MAINTENANCE SCHEDULES
Once A Month Check tire pressure and look for unusual wear or damage. Inspect the battery and clean and tighten the terminals as required. Check the fluid levels of the coolant reservoir and the
CAUTION!
Failure to perform the required maintenance items may result in damage to the vehicle. Proper operation of four-wheel drive vehicles depends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals.
brake master cylinder, add as needed. S C H Check all lights and other electrical items for correct E operation. D U At Each Oil Change L E Change the engine oil filter. S
Inspect the brake hoses and lines.
8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km).

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 16,000 miles (26 000 km). Replace the air conditioning filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings, replace if necessary. Inspect exhaust system. Perform the first inspection at 16,000 miles (26 000 km) or 12 months. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Odometer Reading Repair Order # Signature, Authorized Service Center
Date Dealer Code
Date Dealer Code
M 510 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N Change the engine oil and engine oil A filter. N Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S
24,000 miles (39 000 km). Inspect the CV joints. Inspect exhaust system. Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 32,000 miles (52 000 km). Replace the air conditioning filter. Replace the engine air cleaner filter. Replace the spark plugs (3.7L Engine). Adjust parking brake on vehicles equipped with four-wheel disc brakes. Inspect the transfer case fluid. Inspect the brake linings, replace if necessary. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Date Dealer Code
Date Dealer Code


Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 48,000 miles (78 000 km). Replace the air conditioning filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings, replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
Date Dealer Code
Date Dealer Code
M 512 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N Change the engine oil and engine oil A filter. N Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E
56,000 miles (91 000 km).
S C H E D U L E S
Date Dealer Code

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). Replace the air conditioning filter. Replace the engine air cleaner filter. Replace the ignition cables (3.7L Engine). Replace the spark plugs (3.7L Engine). Adjust parking brake on vehicles equipped with four-wheel disc brakes. Inspect the brake linings; replace if necessary. Change the automatic transmission fluid and filter(s) if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. Change the transfer case fluid if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Date Dealer Code
M 514 MAINTENANCE SCHEDULES A I 72,000 Miles (117,000 km) or N T 54 Months Maintenance E Service Schedule N Change the engine oil and engine oil A filter. N Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S
72,000 miles (117 000 km). Inspect the CV joints. Inspect exhaust system. Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 80,000 miles (130 000 km). Replace the air conditioning filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Flush and replace the engine coolant at 60 months or 104,000 miles (169 000 km) whichever comes first. Inspect the brake linings, replace if necessary. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Date Dealer Code
Date Dealer Code

Date Dealer Code
M 516 MAINTENANCE SCHEDULES A I 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule N Change the engine oil and engine oil filter. T E Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). N Replace the air conditioning filter. A Replace the engine air cleaner filter. N Replace the spark plugs (3.7L Engine). C Inspect and replace PCV valve if necessary. E Adjust parking brake on vehicles equipped with four-wheel disc brakes. S C H E D U L E S
Inspect Inspect Inspect Inspect Inspect replace Inspect the transfer case fluid. the brake linings, replace if necessary. the CV joints. exhaust system. the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; if necessary. the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
Date Dealer Code

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first.

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 112,000 miles (182 000 km). Replace the air conditioning filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings, replace if necessary. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Date Dealer Code
Date Dealer Code
M 518 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or 90 Months Maintenance Service N T Schedule E Change the engine oil and engine oil filter. N Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). A N Inspect the CV joints. C Inspect exhaust system. E Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, S C H E D U L E S
off-road or frequent trailer towing. Change the automatic transmission fluid and filter(s).
Date Dealer Code

Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). Replace the air conditioning filter. Replace the engine air cleaner filter. Replace the ignition cables (3.7L Engine). Replace the spark plugs (3.7L Engine). Adjust parking brake on vehicles equipped with four-wheel disc brakes. Change the transfer case fluid if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. Inspect the brake linings, replace if necessary. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.

Date Dealer Code
Date Dealer Code
M 520 MAINTENANCE SCHEDULES A I 144,000 Miles (234,000 km) or 108 Months Maintenance Service N T Schedule E Change the engine oil and engine oil filter. N Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). A N Replace the air conditioning filter. C If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the E engine air cleaner filter; replace if necessary. S C H E D U L E S
Inspect the brake linings, replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.

Date Dealer Code
Date Dealer Code
WARNING!
You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE

CONTENTS
Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525 Prepare For The Appointment . . . . . . . . . . . 525 Prepare A List . . . . . . . . . . . . . . . . . . . . . . 525 Be Reasonable With Requests . . . . . . . . . . . . 525 If You Need Assistance . . . . . . . . . . . . . . . . . 525 Chrysler Group LLC Customer Center . . . . . 526 Chrysler Canada Inc. Customer Center . . . . . 526 In Mexico Contact . . . . . . . . . . . . . . . . . . . . 526 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 527 Service Contract . . . . . . . . . . . . . . . . . . . . . 527 Warranty Information . . . . . . . . . . . . . . . . . . 528 MOPAR Parts . . . . . . . . . . . . . . . . . . . . . . . 528 Reporting Safety Defects . . . . . . . . . . . . . . . . 528 In The 50 United States And Washington, D.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528 In Canada . . . . . . . . . . . . . . . . . . . . . . . . . 529 Publication Order Forms . . . . . . . . . . . . . . . . 529
524 IF YOU NEED CONSUMER ASSISTANCE
Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 531 Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 531
Traction Grades . . . . . . . . . . . . . . . . . . . . . 531 Temperature Grades . . . . . . . . . . . . . . . . . . 532
IF YOU NEED CONSUMER ASSISTANCE 525
the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If youre having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty. Discuss additional charges with the service The manufacturer and its authorized dealers are vitally manager. Keep a maintenance log of your vehicles interested in your satisfaction. We want you to be happy service history. This can often provide a clue to the with our products and services. current problem. Warranty service must be done by an authorized dealer. Prepare A List We strongly recommend that you take the vehicle to an Make a written list of your vehicles problems or the authorized dealer. They know your vehicle the best, and specific work you want done. If youve had an accident are most concerned that you get prompt and high quality or work done that is not on your maintenance log, let the service. The manufacturers authorized dealers have the service advisor know. facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed Be Reasonable With Requests If you list a number of items and you must have your correctly and in a timely manner. vehicle by the end of the day, discuss the situation with SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE
This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealers service manager first. Most matters can be re- P.O. Box 218004 Auburn Hills, MI 483218004 solved with this process. Phone: (877) 4265337 If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance. Windsor, Ontario N9A 4H6 If an authorized dealership is unable to resolve the Phone: (800) 4652001 English / (800) 3879983 French concern, you may contact the manufacturers customer In Mexico contact: center. Av. Prolongacion Paseo de la Reforma, 1240 Any communication to the manufacturers customer cenSante Fe C.P. 05109 ter should include the following information: Mexico, D. F. Owners name and address In Mexico City: 5081-7568 Outside Mexico City: 1-800-505-1300 Owners telephone number (home and office) Authorized dealership name Vehicle Identification Number (VIN) Vehicle delivery date and mileage
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1800380CHRY. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1 800 855-0511 to connect with a Bell Relay Service operator.
the manufacturers service contracts. If you purchased a manufacturers service contract, you will receive Plan Provisions and an Owner Identification Card in the mail within three weeks of the vehicle delivery date. If you have any questions about the service contract, call the manufacturers Service Contract National Customer Hotline at 1-800-521-9922 (Canadian residents, call (800) 4652001 English / (800) 3879983 French).
The manufacturer will not stand behind any service contract that is not the manufacturers service contract. It is not responsible for any service contract other than the manufacturers service contract. If you purchased a service contract that is not a manufacturers service contract, and you require service after the manufacturers New Service Contract Vehicle Limited Warranty expires, please refer to the You may have purchased a service contract for a vehicle contract documents, and contact the person listed in to help protect you from the high cost of unexpected those documents. repairs after the manufacturers New Vehicle Limited Warranty expires. The manufacturer stands behind only
We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. Youll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
WARRANTY INFORMATION See the Warranty Information Booklet, located on the DVD, for the terms and provisions of Chrysler Group LLC warranties applicable to this vehicle and market. MOPAR PARTS MOPAR fluids, lubricants, parts, and accessories are available from an authorized dealer. They are recommended for your vehicle in order to help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In the 50 United States and Washington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
WARNING!
Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer.
In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately. Canadian customers who wish to report a safety defect to the Canadian government should contact Transport Canada, Motor Vehicle Defect Investigations and Recalls at 1-800-333-0510 or go to To contact NHTSA, you may either call the Auto Safety http://www.tc.gc.ca/roadsafety/ Hotline toll free at 18883274236 (TTY: 1800424 9153), or go to http://www.safercar.gov; or write to: PUBLICATION ORDER FORMS Administrator, NHTSA, 1200 New Jersey Avenue, SE., To order the following manuals, you may use either the West Building, Washington, D.C. 20590. You can also website or the phone numbers listed below. Visa, Masobtain other information about motor vehicle safety from tercard, American Express, and Discover orders are achttp://www.safercar.gov. cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals (no P.O. Boxes).
Service Manuals Owners Manuals These comprehensive Service Manuals provide the These Owners Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles. A complete working knowledge of the and maintenance procedures as well as specifications, vehicle, system, and/or components is written in capabilities and safety tips. straightforward language with illustrations, diagrams, Call toll free at: and charts. Diagnostic Procedure Manuals 18008904038 (U.S.) Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-bystep troubleshooting and drivability procedures, proven diagnostic tests and a complete list of all tools and equipment. 18003871143 (Canada) Or Visit us on the Worldwide Web at: www.techauthority.com
DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tires manufacturer in each category is shown on the sidewall of the tires on your vehicle.
significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
Traction Grades The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tires ability to stop on wet pavement, as measured under controlled conditions All passenger car tires must conform to Federal safety on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perforrequirements in addition to these grades. mance. Treadwear The Treadwear grade is a comparative rating, based on WARNING! the wear rate of the tire when tested under controlled conditions on a specified government test course. For The traction grade assigned to this tire is based on example, a tire graded 150 would wear one and one-half straight-ahead braking traction tests, and does not times as well on the government course as a tire graded include acceleration, cornering, hydroplaning, or 100. The relative performance of tires depends upon the peak traction characteristics. actual conditions of their use, however, and may depart
Temperature Grades The temperature grades are A (the highest), B, and C, representing the tires resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel, than the minimum required by law.
WARNING!
The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
INDEX
10
534 INDEX
About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 351 ABS (Anti-Lock Brake System) . . . . . . . . . . . . 353,356 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 475 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 402 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 465 Air Conditioner Maintenance . . . . . . . . . . . . . . . 467 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . 301 Air Conditioning Controls . . . . . . . . . . . . . . . . . 301 Air Conditioning Filter . . . . . . . . . . . . . . . . . 312,468 Air Conditioning Refrigerant . . . . . . . . . . . . . 467,468 Air Conditioning System . . . . . . . . . . . . . 301,305,467 Air Conditioning, Operating Tips . . . . . . . . . . . . 313 Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 Air Pressure, Tires . . . . . . . . . . . . . . . . . . . . . . . 378 Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Airbag Deployment . . . . . . . . . . . . . . . . . . . . . . . 74 Airbag Light . . . . . . . . . . . . . . . . . . . . . 67,76,90,239 Airbag Maintenance . . . . . . . . . . . . . . . . . . . . . . . 75
Airbag, Window (Side Curtain) . . . . . . . . . . . . . . . 63 Alarm (Security Alarm) . . . . . . . . . . . . . . . . . 18,238 Alarm System (Security Alarm) . . . . . . . . . . . . . . . 18 Alarm, Panic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Alterations/Modifications, Vehicle . . . . . . . . . . . . . 8 Antenna, Satellite Radio . . . . . . . . . . . . . . . . 270,295 Anti-Lock Brake System (ABS) . . . . . . . . . . . . 353,356 Anti-Lock Warning Light . . . . . . . . . . . . . . . . . . 229 Anti-Theft Security Alarm (Theft Alarm) . . . . . . . . 18 Anti-Theft System . . . . . . . . . . . . . . . . . . . . . . . 238 Antifreeze (Engine Coolant) . . . . . . . . . . . . . . 474,502 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 477 Appearance Care . . . . . . . . . . . . . . . . . . . . . . . . 486 Arming Theft System (Security Alarm) . . . . . . . . . 18 Assist, Hill Start . . . . . . . . . . . . . . . . . . . . . . . . 358 Assistance Towing . . . . . . . . . . . . . . . . . . . . . . . 117 Auto Down Power Windows . . . . . . . . . . . . . . . . 36 Auto Unlock, Doors . . . . . . . . . . . . . . . . . . . . . . . 32 Automatic Dimming Mirror . . . . . . . . . . . . . . . . 100
INDEX 535
Automatic Door Locks . . . . . . . . . . . . . . . . . . . . . 32 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 159 Automatic Oil Change Indicator . . . . . . . . . . 236,243 Automatic Temperature Control (ATC) . . . . . . . . . 305 Automatic Transaxle . . . . . . . . . . . . . . . . . . . . . . 322 Special Additives . . . . . . . . . . . . . . . . . . . . . 481 Automatic Transmission . . . . . . . . . . . . . 324,480,482 Adding Fluid . . . . . . . . . . . . . . . . . . . . 482,504 Fluid and Filter Changes . . . . . . . . . . . . 480,482 Fluid Change . . . . . . . . . . . . . . . . . . . . . . . 482 Fluid Level Check . . . . . . . . . . . . . . . . . . . . 481 Fluid Type . . . . . . . . . . . . . . . . . . . . . . 480,504 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 324 Special Additives . . . . . . . . . . . . . . . . . . . . . 481 Torque Converter . . . . . . . . . . . . . . . . . . . . 332 Auxiliary Electrical Outlet (Power Outlet) . . . . . . 202 Auxiliary Power Outlet . . . . . . . . . . . . . . . . . . . 202 Axle Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504 Axle Lubrication (Axle Fluid) . . . . . . . . . . . . . . . 504
B-Pillar Location . . . . . . . . . . . . . . . . . . . . . . . . 373 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466 Keyless Transmitter Replacement (RKE) . . . . . 25 Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45,90 Body Mechanism Lubrication . . . . . . . . . . . . . . . 468 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 357 Brake Control System, Electronic . . . . . . . . . . . . . 355 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . 478 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . 353,356 Fluid Check . . . . . . . . . . . . . . . . . . . . . 479,504 Master Cylinder . . . . . . . . . . . . . . . . . . . . . 479 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . 351 Warning Light . . . . . . . . . . . . . . . . . . . . . . . 237 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 351 Brake/Transmission Interlock . . . . . . . . . . . . . . . 323 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478 Break-In Recommendations, New Vehicle . . . . . . . . 88 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 498,499
10
536 INDEX
Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . 92,498 Cellular Phone . . . . . . . . . . . . . . . . . . . . . . . 103,301 Certification Label . . . . . . . . . . . . . . . . . . . . . . . 406 Calibration, Compass . . . . . . . . . . . . . . . . . . . . . 246 Changing A Flat Tire . . . . . . . . . . . . . . . . . . . . . 435 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 502 Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . 369 Check Engine Light Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 (Malfunction Indicator Light) . . . . . . . . . . . . . 226,459 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . 464 Checking Your Vehicle For Safety . . . . . . . . . . . . . 88 Power Steering . . . . . . . . . . . . . . . . . . . . . . 350 Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Radiator (Coolant Pressure) . . . . . . . . . . . . . 476 Child Restraint . . . . . . . . . . . . . . . . . . . . 78,79,83,85 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487 Child Restraint Tether Anchors . . . . . . . . . . . . . 82,83 Carbon Monoxide Warning . . . . . . . . . . . . . . . 89,403 Child Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . 33 Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . . . . 406 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . 400 Cargo Area Cover . . . . . . . . . . . . . . . . . . . . . . . 212 Cleaning Cargo Area Features . . . . . . . . . . . . . . . . . . . . . . 208 Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489 Windshield Wiper Blades . . . . . . . . . . . . . . . 469 Cargo Compartment . . . . . . . . . . . . . . . . . . . . . . 208 Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Climate Control . . . . . . . . . . . . . . . . . . . . . . . . . 301 Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 256,275,284 Cargo Load Floor . . . . . . . . . . . . . . . . . . . . . . . . 208 Coin Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Cargo Tie-Downs . . . . . . . . . . . . . . . . . . . . . . . . 210 Cold Weather Operation . . . . . . . . . . . . . . . . . . . 320
INDEX 537
Command-Trac Operation . . . . . . . . . . . . . . . . . . 333 Compact Disc (CD) Maintenance . . . . . . . . . . . . . 300 Compact Spare Tire . . . . . . . . . . . . . . . . . . . . . . 381 Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Compass Calibration . . . . . . . . . . . . . . . . . . . . . 246 Compass Variance . . . . . . . . . . . . . . . . . . . . . . . 246 Computer, Trip/Travel . . . . . . . . . . . . . . . . . . . . 244 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Console, Floor . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 527 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 476 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 473 Adding Coolant (Antifreeze) . . . . . . . . . . . . . 475 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . 502 Coolant Level . . . . . . . . . . . . . . . . . . . . 473,477 Disposal of Used Coolant . . . . . . . . . . . . . . . 477 Drain, Flush, and Refill . . . . . . . . . . . . . . . . 474 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 477 Points to Remember . . . . . . . . . . . . . . . . . . 477
Pressure Cap . . . . . . . . . . . . . . Selection of Coolant (Antifreeze) Corrosion Protection . . . . . . . . . . . Cruise Light . . . . . . . . . . . . . . . . . Cupholders . . . . . . . . . . . . . . . . . . Customer Assistance . . . . . . . . . . .
. . . . . . . . . . 476 . . . . 474,502,503 . . . . . . . . . . 486 . . . . . . . . . . 236 . . . . . . . . . . 205 . . . . . . . . . . 525
Data Recorder, Event . . . . . . . . . . . . . . . . . . . . . . 77 Daytime Running Lights . . . . . . . . . . . . . . . . . . . 161 Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . . . 461 Defroster, Rear Window . . . . . . . . . . . . . . . . . . . 215 Defroster, Windshield . . . . . . . . . . . . . . . . 91,303,309 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . 166 Diagnostic System, Onboard . . . . . . . . . . . . . . . . 458 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . 162 Dipsticks Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . 462 Power Steering . . . . . . . . . . . . . . . . . . . . . . 350 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 450
10
538 INDEX
Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . 477 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 464 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 32 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 184 Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344,345 Off-Pavement . . . . . . . . . . . . . . . . . . . . . . . 345 Off-Road . . . . . . . . . . . . . . . . . . . . . . . . . . 345 On Hills . . . . . . . . . . . . . . . . . . . . . . . . . . . 345 Through Flowing, Rising, or Shallow Standing Water . . . . . . . . . . . . . . . . . . . . . . 345 When to Use Low Range . . . . . . . . . . . . . . . 345 Electric Remote Mirrors . . . . . . . . . . . . . Electrical Outlet, Auxiliary (Power Outlet) Electrical Power Outlets . . . . . . . . . . . . . Electronic Brake Control System . . . . . . . Anti-Lock Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 202 202 355 356
Brake Assist System . . . . . . . . . . . . . . . . . . . 357 Electronic Roll Mitigation . . . . . . . . . . . . . . . 358 Traction Control System . . . . . . . . . . . . . . . . 356 Electronic Roll Mitigation (ERM) . . . . . . . . . . . . . 358 Electronic Speed Control (Cruise Control) . . . . . . 173 Electronic Stability Control (ESC) . . . . . . . . . . . . . 363 Electronic Vehicle Information Center (EVIC) . . . . 239 Emergency, In Case of Hazard Warning Flasher . . . . . . . . . . . . . . . 434 Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 444 Overheating . . . . . . . . . . . . . . . . . . . . . . . . 434 Emission Control System Maintenance . . . . . . . . . 459 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 465 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 321 Break-In Recommendations . . . . . . . . . . . . . . 88 Checking Oil Level . . . . . . . . . . . . . . . . . . . 462 Compartment . . . . . . . . . . . . . . . . . . . . . . . 457
INDEX 539
Coolant (Antifreeze) . . . . . . . . . . . . . . . . 473,503 Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 473 Exhaust Gas Caution . . . . . . . . . . . . . . . . 89,403 Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . 320 Flooded, Starting . . . . . . . . . . . . . . . . . . . . . 320 Fuel Requirements . . . . . . . . . . . . . . . . . . . . 399 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 444 Oil . . . . . . . . . . . . . . . . . . . . . . . . . 462,502,503 Oil Change Interval . . . . . . . . . . . . . 236,243,463 Oil Filler Cap . . . . . . . . . . . . . . . . . . . . . . . 464 Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 Oil Filter Disposal . . . . . . . . . . . . . . . . . . . . 464 Oil Selection . . . . . . . . . . . . . . . . . . . . . 463,502 Oil Synthetic . . . . . . . . . . . . . . . . . . . . . . . . 464 Overheating . . . . . . . . . . . . . . . . . . . . . . . . 434 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 Temperature Gauge . . . . . . . . . . . . . . . . . . . 231 Engine Oil Viscosity . . . . . . . . . . . . . . . . . . . . . . 464
Engine Oil Viscosity Chart . . . . . . . . . . . . . . . . . 464 Enhanced Accident Response Feature . . . . . . . . . . 73 Entry System, Illuminated . . . . . . . . . . . . . . . . . . 20 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Event Data Recorder . . . . . . . . . . . . . . . . . . . . . . 77 Exhaust Gas Caution . . . . . . . . . . . . . . . . . . . 89,403 Exhaust System . . . . . . . . . . . . . . . . . . . . . . . 89,470 Exterior Finish Care . . . . . . . . . . . . . . . . . . . . . . 487 Exterior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Fabric Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490 Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 465 Air Conditioning . . . . . . . . . . . . . . . . . . 312,468 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . 465,503 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . 464 Finish Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
10
540 INDEX
Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . 434 Turn Signal . . . . . . . . . . . . . . 92,162,227,500,501 Flipper Glass, Liftgate . . . . . . . . . . . . . . . . . . . . . 40 Flooded Engine Starting . . . . . . . . . . . . . . . . . . . 320 Floor Console . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 502 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Fluid Level Checks . . . . . . . . . . . . . . . . . . . . 482,483 Automatic Transmission . . . . . . . . . . . . . . . . 480 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479 Cooling System . . . . . . . . . . . . . . . . . . . . . . 473 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 462 Power Steering . . . . . . . . . . . . . . . . . . . . . . 350 Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 504 Fluids, Lubricants and Genuine Parts . . . . . . . . . . 503 Fog Light Service . . . . . . . . . . . . . . . . . . . . . . . . 500 Fog Lights . . . . . . . . . . . . . . . . . . . . 158,161,227,500 Folding Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . 149
Four Wheel Drive Shifting . . . . . . . . . . . . . . . . . . . 333,335,339,341 Systems . . . . . . . . . . . . . . . . . . . . . . . . 333,339 Four Wheel Drive Operation . . . . . . . . . . . . . . . . 333 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . . 448 Front Axle (Differential) . . . . . . . . . . . . . . . . . . . 483 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 Additives . . . . . . . . . . . . . . . . . . . . . . . . . . 402 Clean Air . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Filler Cap (Gas Cap) . . . . . . . . . . . . . . . . . . 404 Gasoline . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Materials Added . . . . . . . . . . . . . . . . . . . . . 402 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Octane Rating . . . . . . . . . . . . . . . . . . . . 399,503 Requirements . . . . . . . . . . . . . . . . . . . . . . . 399 Specifications . . . . . . . . . . . . . . . . . . . . . . . 503 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . 502
INDEX 541
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492 Gross Axle Weight Rating . . . . . . . . . . . . . . . 407,410 Gross Vehicle Weight Rating . . . . . . . . . . . . . 407,409 Garage Door Opener (HomeLink) . . . . . . . . . . . 184 GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407 Gas Cap (Fuel Filler Cap) . . . . . . . . . . . . 404,406,458 Gas Gauge (Fuel Gauge) . . . . . . . . . . . . . . . . . . . 224 Hands-Free Phone (Uconnect) . . . . . . . . . . . . . 103 Gasoline (Fuel) . . . . . . . . . . . . . . . . . . . . . . . . . 399 Hazard Driving Through Flowing, Rising, or Shallow Gasoline, Clean Air . . . . . . . . . . . . . . . . . . . . . . 400 Standing Water . . . . . . . . . . . . . . . . . . . . . . 345 Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 400 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . . 434 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . 231 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . 145 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Head Rests . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 234 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . 159 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . 227 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 229 Bulb Replacement . . . . . . . . . . . . . . . . . . . . 499 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 491 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Gear Select Lever Override . . . . . . . . . . . . . . . . . 449 High Beam/Low Beam Select Switch . . . . . . 162 General Information . . . . . . . . . . . . . . . 17,26,133,399 Lights On Reminder . . . . . . . . . . . . . . . . . . 161 General Maintenance . . . . . . . . . . . . . . . . . . . . . 461 On With Wipers . . . . . . . . . . . . . . . . . . . 160,170 Glass Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 491
10
542 INDEX
Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . 499 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Time Delay . . . . . . . . . . . . . . . . . . . . . . . . . 160 Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . 102 Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . 321 High Beam Indicator . . . . . . . . . . . . . . . . . . . . . 227 High Beam/Low Beam Select (Dimmer) Switch . . 162 Hill Descent Control . . . . . . . . . . . . . . . . . . . . . 361 Hill Descent Control Indicator . . . . . . . . . . . . 230,361 Hill Start Assist . . . . . . . . . . . . . . . . . . . . . . . . . 358 Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . 414 Holder, Coin . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 HomeLink (Garage Door Opener) Transmitter . . 184 Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 12 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . 20 Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 14 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . 78,79 Inflation Pressure Tires . . . . . . . . . . . . . . . . . . . . 378 Information Center, Vehicle . . . . . . . . . . . . . . . . . 239 Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 99 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 223,224 Instrument Panel and Controls . . . . . . . . . . . . . . 222 Instrument Panel Cover . . . . . . . . . . . . . . . . . . . 490 Instrument Panel Lens Cleaning . . . . . . . . . . . . . 491 Integrated Power Module (Fuses) . . . . . . . . . . . . 492 Interior Appearance Care . . . . . . . . . . . . . . . . . . 490 Interior Lighting . . . . . . . . . . . . . . . . . . . . . . . . 158 Intermittent Wipers (Delay Wipers) . . . . . . . . . . . 166 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INDEX 543
Jack Location . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 Jack Operation . . . . . . . . . . . . . . . . . . . . . . . 435,439 Jacking Instructions . . . . . . . . . . . . . . . . . . . . . . 439 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . 444 Key-In Reminder . . . . . . Key, Programming . . . . . Key, Replacement . . . . . Key, Sentry (Immobilizer) Keyless Entry System . . . Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 16 16 14 20 12
Lane Change and Turn Signals . . . . . . . . . . . . . . 162 Lane Change Assist . . . . . . . . . . . . . . . . . . . . . . 162 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 45 LATCH (Lower Anchors and Tether for CHildren) . . . . . 82,83 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 399 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Liftgate Flipper Glass . . . . . . . . . . . . . . . . . . . . . . 40 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 92,498 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92,158 Airbag . . . . . . . . . . . . . . . . . . . . . . 67,76,90,239 Anti-Lock . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Automatic Headlights . . . . . . . . . . . . . . . . . 159 Back-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 Battery Saver . . . . . . . . . . . . . . . . . . . . . . . 164 Brake Assist Warning . . . . . . . . . . . . . . . . . . 366 Brake Warning . . . . . . . . . . . . . . . . . . . . . . 237 Bulb Replacement . . . . . . . . . . . . . . . . . 498,499 Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Cruise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Daytime Running . . . . . . . . . . . . . . . . . . . . 161 Dimmer Switch, Headlight . . . . . . . . . . . 158,162
10
544 INDEX
Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 229 Electronic Stability Program (ESP) Indicator . . 366 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Engine Temperature Warning . . . . . . . . . . . . 231 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Rear Servicing . . . . . . . . . . . . . . . . . . . . . . . 501 Fog . . . . . . . . . . . . . . . . . . . . . . . . . 161,227,500 Rear Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 Four-Wheel Drive Indicator . . 230,231,233,336,342 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . 236 Hazard Warning Flasher . . . . . . . . . . . . . . . 434 Service . . . . . . . . . . . . . . . . . . . . . . . . . 498,499 Headlight Switch . . . . . . . . . . . . . . . . . . . . . 158 Service Engine Soon Headlights . . . . . . . . . . . . . . . . . . . . . . 158,499 (Malfunction Indicator) . . . . . . . . . . . . . . . . 226 Headlights On Reminder . . . . . . . . . . . . . . . 161 Side Marker . . . . . . . . . . . . . . . . . . . . . . . . 500 Headlights On With Wipers . . . . . . . . . . 160,170 Tire Pressure Monitoring (TPMS) . . . . . . . 224,389 High Beam . . . . . . . . . . . . . . . . . . . . . . 162,227 Tow/Haul Indicator . . . . . . . . . . . . . . . . . . 230 High Beam Indicator . . . . . . . . . . . . . . . . . . 227 Traction Control . . . . . . . . . . . . . . . . . . . . . 366 High Beam/Low Beam Select . . . . . . . . . . . . 162 Hill Descent Control Indicator . . . . . . . . . 230,361 Transfer Case . . . . . . . . . . . . . . . . . . . . . 336,342 Turn Signal . . . . . . . . . . . . . . 92,158,162,500,501 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . 20 Vanity Mirror . . . . . . . . . . . . . . . . . . . . . . . 102 Instrument Cluster . . . . . . . . . . . . . . . . . 158,224 Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 Lights On Reminder . . . . . . . . . . . . . . . . . . 161 Warning (Instrument Cluster Description) . . . 224 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Malfunction Indicator (Check Engine) . . . . . . 226 Load Floor, Cargo . . . . . . . . . . . . . . . . . . . . . . . 208
INDEX 545
Loading Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 406 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Auto Unlock . . . . . . . . . . . . . . . . . . . . . . . . . 32 Automatic Door . . . . . . . . . . . . . . . . . . . . . . 32 Child Protection . . . . . . . . . . . . . . . . . . . . . . 33 Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Power Door . . . . . . . . . . . . . . . . . . . . . . . . . 31 Low Tire Pressure System . . . . . . . . . . . . . . . . . . 389 Lower Anchors and Tether for CHildren (LATCH) . . . . . . . . . . . . . . . . . . . . . 82,83 Lubrication, Body . . . . . . . . . . . . . . . . . . . . . . . 468 Luggage Carrier . . . . . . . . . . . . . . . . . . . . . . . . . 216 Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . 144 Maintenance Free Battery Maintenance Procedures . Maintenance Schedule . . Maintenance, General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466 461 506 461
Maintenance, Sunroof . . . . . . . . . . . . . . . . . . . . . 196 Malfunction Indicator Light (Check Engine) . . 226,459 Manual Transmission Lubricant Selection . . . . . . . . . . . . . . . . . . . 504 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 529 Marker Lights, Side . . . . . . . . . . . . . . . . . . . . . . 500 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 479 Memory Feature (Memory Seat) . . . . . . . . . . . . . 151 Memory Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Memory Seats and Radio . . . . . . . . . . . . . . . . . . 151 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . . . . 244 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Automatic Dimming . . . . . . . . . . . . . . . . . . 100 Electric Powered . . . . . . . . . . . . . . . . . . . . . 101 Electric Remote . . . . . . . . . . . . . . . . . . . . . . 101 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
10
546 INDEX
Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . 462,503 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . 502 Modifications/Alterations, Vehicle . . . . . . . . . . . . . 8 Change Interval . . . . . . . . . . . . . . . . 236,243,463 Monitor, Tire Pressure System . . . . . . . . . . . . . . . 389 Checking . . . . . . . . . . . . . . . . . . . . . . . . . . 462 Mopar Parts . . . . . . . . . . . . . . . . . . . . . . . . . 461,528 Dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . 462 MTBE/ETBE . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 464 Multi-Function Control Lever . . . . . . . . . . . . . . . 158 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . 465,503 Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . 464 New Vehicle Break-In Period . . . . . . . . . . . . . . . . 88 Identification Logo . . . . . . . . . . . . . . . . . . . 463 Materials Added to . . . . . . . . . . . . . . . . . . . 464 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . . . 42 Recommendation . . . . . . . . . . . . . . . . . . 463,502 Occupant Restraints (Sedan) . . . . . . . . . . . . . . . . . 63 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . 464 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . 399,503 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . 464,502 Odometer Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Onboard Diagnostic System . . . . . . . . . . . . . . 458,459 Off-Pavement Driving (Off-Road) . . . . . . . . . . . . 345 Opener, Garage Door (HomeLink) . . . . . . . . . . . 184 Off-Road Driving (Off-Pavement) . . . . . . . . . . . . 345 Operating Precautions . . . . . . . . . . . . . . . . . . . . 458 Oil Change Indicator . . . . . . . . . . . . . . . . . . 236,243 Operator Manual (Owners Manual) . . . . . . . . . . . . 5 Oil Change Indicator, Reset . . . . . . . . . . . . . . 236,243 Outside Rearview Mirrors . . . . . . . . . . . . . . . . . . 101 Oil Filter, Change . . . . . . . . . . . . . . . . . . . . . . . . 465 Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . 236,331
INDEX 547
Overdrive OFF Switch . . . . . . . . . . . . . . . . . . . . 331 Power Overheating, Engine . . . . . . . . . . . . . . . . . . . 232,434 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . 31 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Owners Manual (Operator Manual) . . . . . . . . . 5,529 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Steering . . . . . . . . . . . . . . . . . . . . . . . . 349,350 Paint Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486 Paint Damage . . . . . . . . . . . . . . . . . . . . . . . . . . 486 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Sunroof (Sky Slider) . . . . . . . . . . . . . . . . 196,484 Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Park Sense System, Rear . . . . . . . . . . . . . . . . . . . 176 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 351 Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . 504 Parking On Hill . . . . . . . . . . . . . . . . . . . . . . . . . 351 Pregnant Women and Seat Belts . . . . . . . . . . . . . . 58 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 438 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . 249 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Pets, Transporting . . . . . . . . . . . . . . . . . . . . . . . . 87 Programmable Electronic Features . . . . . . . . . . . . 249 Phone, Cellular . . . . . . . . . . . . . . . . . . . . . . . . . 103 Programming Transmitters Phone, Hands-Free (Uconnect) . . . . . . . . . . . . . 103 (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 20 Placard, Tire and Loading Information . . . . . . . . . 373 Polishing and Waxing . . . . . . . . . . . . . . . . . . . . . 487 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 380 Radiator Cap (Coolant Pressure Cap) . . . . . . . . . . 476
10
548 INDEX
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . 301 Rain Sensitive Wiper System . . . . . . . . . . . . . . . . 168 Rear Axle (Differential) . . . . . . . . . . . . . . . . . . . . 483 Rear Park Sense System . . . . . . . . . . . . . . . . . . . 176 Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . . . . 149 Rear Window Defroster . . . . . . . . . . . . . . . . . . . 215 Rear Window Features . . . . . . . . . . . . . . . . . . . . 214 Rear Wiper/Washer . . . . . . . . . . . . . . . . . . . . . . 214 Rearview Mirrors . . . . . . . . . . . . . . . . . . . . . . . . 99 Reclining Front Seats . . . . . . . . . . . . . . . . . . . . . 143 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . 77 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . 424 Shifting into Transfer Case Neutral (N) . . . . . 427 Shifting out of Transfer Case Neutral (N) . . . . 429 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . 400 Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468 Release, Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Reminder, Lights On . . . . . . . . . . . . . . . . . . . . . 161 Reminder, Seat Belt . . . . . . . . . . . . . . . . . . . . . . . 57
Remote Control Starting System . . . . . . . . . . . . . . . . . . . . . . . 27 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . 20 Remote Sound System (Radio) Controls . . . . . . . . 298 Remote Starting System . . . . . . . . . . . . . . . . . . . . 27 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . 498 Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . 16 Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 461 Replacement Tires . . . . . . . . . . . . . . . . . . . . . . . 385 Reporting Safety Defects . . . . . . . . . . . . . . . . . . . 528 Resetting Oil Change Indicator . . . . . . . . . . . 236,243 Restraint, Head . . . . . . . . . . . . . . . . . . . . . . . . . 145 Restraints, Child . . . . . . . . . . . . . . . . . . . . . . . . . 78 Restraints, Occupant . . . . . . . . . . . . . . . . . . . . . . 42 Retractable Cargo Area Cover . . . . . . . . . . . . . . . 212 Roll Over Warning . . . . . . . . . . . . . . . . . . . . . . . . 4 Roof Sky Slider Power . . . . . . . . . . . . . . . . . . 196,484 Roof Type Carrier . . . . . . . . . . . . . . . . . . . . . . . 216
INDEX 549
Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 90 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 92 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 528 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 368 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 89 Satellite Radio Antenna . . . . . . . . . . . . . . . . . 270,295 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . 506 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . 492 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . 57 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45,90 Adjustable Upper Shoulder Anchorage . . . . . . 49 And Pregnant Women . . . . . . . . . . . . . . . . . . 58 Child Restraint . . . . . . . . . . . . . . . . . . . 78,79,85 Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . 53 Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Shoulder Belt Anchorage . . . . . . . . . . . . . . . . 49 Untwisting Procedure . . . . . . . . . . . . . . . . . . 50 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 138 Easy Entry . . . . . . . . . . . . . . . . . . . . . . . . . 155 Head Restraints . . . . . . . . . . . . . . . . . . . . . . 145 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Height Adjustment . . . . . . . . . . . . . . . . . . . 139 Lumbar Support . . . . . . . . . . . . . . . . . . . . . 144 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Rear Folding . . . . . . . . . . . . . . . . . . . . . . . . 149 Reclining . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Seatback Release . . . . . . . . . . . . . . . . . . . . . 149 Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Security Alarm (Theft Alarm) . . . . . . . . . . . . . 18,238 Selec-Trac Operation . . . . . . . . . . . . . . . . . . . . . . 339
10
550 INDEX
Selection of Coolant (Antifreeze) . . . . . . . . . . 474,503 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 463 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 14 Sentry Key Programming . . . . . . . . . . . . . . . . . . . 16 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 525 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 527 Service Engine Soon Light (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . 226 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 529 Setting the Clock . . . . . . . . . . . . . . . . . . 256,275,284 Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 249 Shift Lever Override . . . . . . . . . . . . . . . . . . . . . . 449 Shifting Automatic Transmission . . . . . . . . . . . . . . . . 324 Transfer Case . . . . . . . . . . . . . . . 333,335,339,341 Short Message Service (SMS) . . . . . . . . . . . . . . . . 125 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Side View Mirror Adjustment . . . . . . . . . . . . . . . 101
Side Window Demisters (Defrosters) . . . . . . . . . . 312 Signals, Turn . . . . . . . . . . . . . . . . . 92,162,227,500,501 Sky Slider Power Roof . . . . . . . . . . . . . . . . . 196,484 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 386 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . 381,382,436 Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503 Specifications Fuel (Gasoline) . . . . . . . . . . . . . . . . . . . . . . 503 Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463,503 Speed Control (Cruise Control) . . . . . . . . . . . . . . 173 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27,319 Cold Weather . . . . . . . . . . . . . . . . . . . . . . . 320 Engine Block Heater . . . . . . . . . . . . . . . . . . 321 Engine Fails to Start . . . . . . . . . . . . . . . . . . 320 Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Starting and Operating . . . . . . . . . . . . . . . . . . . . 319 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . 319
INDEX 551
Steering Power . . . . . . . . . . . . . . . . . . . . . . . . . . 349,350 Tilt Column . . . . . . . . . . . . . . . . . . . . . . 171,172 Wheel, Tilt . . . . . . . . . . . . . . . . . . . . . . 171,172 Steering Wheel Audio Controls . . . . . . . . . . . . . . 298 Steering Wheel Mounted Sound System Controls . . . . . . . . . . . . . . . . . . . . . . . . . 298 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Storage Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Storage, Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 311 Stuck, Freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 448 Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Sun Roof (Sky Slider Power) . . . . . . . . . . . . . 196,484 Sun Visor Extension . . . . . . . . . . . . . . . . . . . . . . 103 Sunroof Maintenance . . . . . . . . . . . . . . . . . . . . . 196 Supplemental Restraint System - Airbag . . . . . . . . 59 Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 464 System, Remote Starting . . . . . . . . . . . . . . . . . . . . 27
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Temperature Control, Automatic (ATC) . . . . . . . . 305 Temperature Gauge, Engine Coolant . . . . . . . . . . 231 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 82 Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . 125 Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 18 Theft System (Security Alarm) . . . . . . . . . . . . . . . 18 Tie Down Hooks, Cargo . . . . . . . . . . . . . . . . . . . 210 Tilt Steering Column . . . . . . . . . . . . . . . . . . . 171,172 Time Delay, Headlight . . . . . . . . . . . . . . . . . . . . 160 Tip Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Tire and Loading Information Placard . . . . . . . . . 373 Tire Identification Number (TIN) . . . . . . . . . . . . . 371 Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Tire Safety Information . . . . . . . . . . . . . . . . . . . . 368 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92,377,531 Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . 378 Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Changing . . . . . . . . . . . . . . . . . . . . . . . . . . 435
10
552 INDEX
Compact Spare . . . . . . . . . . . . . . . . . . . . . . 381 General Information . . . . . . . . . . . . . . . . . . 377 High Speed . . . . . . . . . . . . . . . . . . . . . . . . . 380 Inflation Pressures . . . . . . . . . . . . . . . . . . . . 378 Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . 384 Load Capacity . . . . . . . . . . . . . . . . . . . . 373,374 Pressure Monitor System (TPMS) . . . . . . . . . 389 Pressure Warning Light . . . . . . . . . . . . . . . . 224 Quality Grading . . . . . . . . . . . . . . . . . . . . . 531 Radial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 Replacement . . . . . . . . . . . . . . . . . . . . . . . . 385 Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . 436 Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Tread Wear Indicators . . . . . . . . . . . . . . . . . 384 To Open Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 417 Torque Converter Clutch . . . . . . . . . . . . . . . . . . 332 Tow/Haul Indicator Light . . . . . . . . . . . . . . . . . 230 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409,450 24-Hour Towing Assistance . . . . . . . . . . . . . 117 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . 450 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415 Recreational . . . . . . . . . . . . . . . . . . . . . . . . 424 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415 Towing Assistance . . . . . . . . . . . . . . . . . . . . . . . 117 Traction Control . . . . . . . . . . . . . . . . . . . . . . . . . 356 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 409 Cooling System Tips . . . . . . . . . . . . . . . . . . 424 Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414 Minimum Requirements . . . . . . . . . . . . . . . . 418 Trailer and Tongue Weight . . . . . . . . . . . . . . 417 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 Trailer Towing Guide . . . . . . . . . . . . . . . . . . . . . 415 Trailer Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 415
INDEX 553
Transaxle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . 322 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Transfer Case . . . . . . . . . . . . . . . . . . . . . . . . . . . 482 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . 482,504 Four-Wheel-Drive Operation . . . . . . . . . . . . 333 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 482 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . 324 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 480 Transmitter Battery Service (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 25 Transmitter Programming (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 20 Transmitter, Garage Door Opener (HomeLink) . . 184 Transmitter, Remote Keyless Entry (RKE) . . . . . . . . 20 Tread Wear Indicators . . . . . . . . . . . . . . . . . . . . 384 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Trip Odometer Reset Button . . . . . . . . . . . . . . . . 233 Turn Signals . . . . . . . . . . . . . . . . 158,162,227,500,501 Uconnect (Hands-Free Phone) Uniform Tire Quality Grades . . Universal Transmitter . . . . . . . Unleaded Gasoline . . . . . . . . . Untwisting Procedure, Seat Belt Upholstery Care . . . . . . . . . . . . . . . . . . . . . . . 103 . . . . . . . . . . . . . . 531 . . . . . . . . . . . . . . 184 . . . . . . . . . . . . . . 399 . . . . . . . . . . . . . . 50 . . . . . . . . . . . . . . 490
Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 246 Vehicle Certification Label . . . . . . . . . . . . . . . . . 406 Vehicle Identification Number (VIN) . . . . . . . . . . . . 7 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . 374,406 Vehicle Modifications/Alterations . . . . . . . . . . . . . . 8 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . . . 311 Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . 18 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . 464
10
554 INDEX
Voice Recognition System (VR) . . . . . . . . . . . . . . 133 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 312 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Warning Flasher, Hazard . . . . . . . . . . . . . . . . . . 434 Warning Lights (Instrument Cluster Description) . . . 224 Windshield Defroster . . . . . . . . . . . . . . . . 91,303,309 Warning, Roll Over . . . . . . . . . . . . . . . . . . . . . . . . 4 Windshield Washers . . . . . . . . . . . . . . . . 164,167,470 Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . 7 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 Warranty Information . . . . . . . . . . . . . . . . . . . . . 528 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 469 Washers, Windshield . . . . . . . . . . . . . . . . 164,167,470 Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . . 164 Water Wiper Blade Replacement . . . . . . . . . . . . . . . . . . 469 Driving Through . . . . . . . . . . . . . . . . . . . . . 345 Wiper, Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Waxing and Polishing . . . . . . . . . . . . . . . . . . . . . 487 Wiper, Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 489 Wipers, Intermittent . . . . . . . . . . . . . . . . . . . . . . 166 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 489 Wipers, Rain Sensitive . . . . . . . . . . . . . . . . . . . . 168 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . 39,196,201
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicles electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible. The negative power connection should be made to body sheet metal adjacent to the negative battery connection. This connection should not be fused. Antennas for two-way radios should be mounted on the roof or the rear area of the vehicle. Care should be used in mounting antennas with magnet bases. Magnets may affect the accuracy or operation of the compass on vehicles so equipped.
The antenna cable should be as short as practical and routed away from the vehicle wiring when possible. Use only fully shielded coaxial cable. Carefully match the antenna and cable to the radio to ensure a low Standing Wave Ratio (SWR). Mobile radio equipment with output power greater than normal may require special precautions. All installations should be checked for possible interference between the communications equipment and the vehicles electronic systems.
Chrysler Group LLC

12KK74-126-AE 5th Edition Printed in U.S.A.

2012 Jeep Liberty Owners Manual

Uploaded by

Copyright:

Available Formats

2012 Jeep Liberty Owners Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2012 Jeep Liberty Owners Manual

Uploaded by

Copyright:

Available Formats

2012

Copyright 2011 Chrysler Group LLC

Vehicle Identification Number

Stamped VIN Location

NOTE: It is illegal to remove or alter the VIN.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Remote Starting System If Equipped . . . . . . . 27 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 42

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11

12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13

Ignition Switch Positions

14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19

20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25

26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Separating Case Halves

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Battery at an acceptable charge level.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31

Power Door Lock Switch Location

32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Child-Protection Door Lock

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35

36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37

38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39

40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41

42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43

44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45

46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47

Latch Plate To Buckle

48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49

50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Adjusting Upper Shoulder Belt

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51

52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53

54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Active Head Restraint (AHR) Components