Scribd
Upload
1K views2 pages

Transmitter SML 10

This document summarizes the specifications of the ADZ-SML-10.0 pressure transmitter series. The transmitters measure pressure ranges from 1 to 2000 bar with an output signal of 4-20 mA. They operate in temperatures from -40 to +105 degrees Celsius and are resistant to pressure peaks, shocks, and vibrations. Key components include a piezo-resistive pressure sensor, stainless steel casing and membrane, and an ASIC chip for signal processing.

Uploaded by

alamsyah_syam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Transmitter SML 10

This document summarizes the specifications of the ADZ-SML-10.0 pressure transmitter series. The transmitters measure pressure ranges from 1 to 2000 bar with an output signal of 4-20 mA. They operate in temperatures from -40 to +105 degrees Celsius and are resistant to pressure peaks, shocks, and vibrations. Key components include a piezo-resistive pressure sensor, stainless steel casing and membrane, and an ASIC chip for signal processing.

Uploaded by

alamsyah_syam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Pressure Transmitter Series

Measuring range from: Output signal: Operating temperature: Media:


1 1 1 1 1

ADZ - SML 10.0


4...20 mA

-0,1 MPa...+0,1 MPa and 0,06 MPa bis 200 MPa -1...+1 bar and 0...600 mbar to 2000 bar 4...20 mA (2 wire) -40C bis +105C to +125C

Resistant to pressure peaks shockproof and vibration-proof Insensitive to temperature shocks Protective system IP 65 according to DIN EN 60 529 Parts and casing with contact to measuring materialof CrNi steel

Construction
1 1 1 1 1 1 1 1 1 Piezo-resistive, vacuum-proof Stainless steel membrane Poly-Si on SiO2 (thin film resistances) Mixed signal ASIC Case: Stainless steel Electrical connection: MVS DIN EN 175 301 803 *) Port configuration: G 1/4 " Design E *) Accuracy: 0.5% F.S. (RT) standard Weight: 90 g

*) other on request thread types and plug

Application / possible uses


1 1 1 1 1 1 1 Hydraulics Air Conditioning + Heating Testing Technology Industrial Robots Process Control Water Technology Pneumatics

Description
Connection - PIN The ADZ-SML-10.0 pressure transmitters contain only a small number of active components, such as the sensor element, a signal processing ASIC and a 1 U/I converter circuit. The transmitter works with +VS protection circuits connection included with 3 2 pressure peak damping, load-dump-protection and they are EMV stability reverse voltage protected. V Calibration takes place electronically, so that the -VS resp. I out Pressure transmitters display a comparably small total error and are stable in the long term. The hermetically welded thin film measuring cell Ensures a high degree of longterm resistance to leakage and stability. The ASIC is a programmable precision-CMOS-ASIC with EEPROM data storage and analogue signal path. The special steel membrane is completely vacuum-tight, extremely burst-proof and can be used with all standard media in hydraulics, pneumatics, environmental technology, process technology, semi-conductor technology and automotive engineering, in as far as they are compatible with special steel. This thereby covers use in standard applications in mobile hydraulics and in other areas of application. The great exactness and the robust, compact structure guarantee a broad range of possible uses in industry. On the basis of the combinability of different mechanical and electronic connections, a variety of different pressure transmitters is offered. Upon request, a test protocol , approbations work certificate or (DKD protocol) calibrate certificate - is supplied.

- Mistakes and changes in the sense of technical improvements reserved. 01/06

Pressure Transmitter
Technical information Measuring range (bar / Mpa) standard pressure ranges *) 1,0 1,6 2,5 4,0 6,0 10,0 16,0 25,0 40,0 (bar) *) (bar) *) *)

Series ADZ SML-10.0


Typ: ADZ-SML-10.0 bar MPa bar MPa 0,6 0,06 60,0 6,0 0,1 100,0 10,0 0,16 160,0 16,0 0,25 250,0 25,0 0,4 400,0 40,0 0,6 600,0 60,0 1,0 1000,0 100,0 1,6 1600,0 160,0 2,5 2000,0 200,0 4,0 2 times > 350 bar; 1,5 times > 700 bar; 1,2 times up to 1000 bar 2 times > 350 bar; 1,5 times > 700 bar; 1,2 times up to 1000 bar Relative pressure G 1/4" E Standard Optionally, different pressure connections available Stainless steel, CrNiCuNb 17-4 ph no O-ring, no silicone oil Stainless steel 4...20 mA 12 to 32 V (Vs - 12 V)/ 20 mA < 1 ms 100 M W Standard design device plug DIN EN 175 301-803 BF C IP 65 - according to plug system 0,5 max. (optional 0,25) ****)

Overload range Bursting pressure Pressure type Pressure connection

Materials used Materials of parts with contact to measuring medium: Materials of casing: Diaphragm Electrical parameters Output signal *) Operating voltage Ub recommended max. Load resistor RI Response time (10...90 %) Insulating resistance at 50 V Electrical connection *) Protection system according to DIN EN 60 529 Linearity error at RT (% F.S.) (B.S.F.L.) **) Ambient values Reproducibility stability per year, permitted - Ambient temperature (C) - Media temperature (C) - Storage temperature (C) Total error ***) max. ****)

-40 ... +105 C -40 ... +125 C -40 ... +125 C -40 C... -20 C 3,0 % typ. 2,0 % -20 C... +85 C 1,0 % typ. 0,7 % +85 C... +100 C 2.5 % typ. 1,5 %

Electromagnetic compatibility EMV Testing according to DIN EN 55011 and DIN EN 61000-4-3 Resistance to shock Testing according to IEC 68-2-32 Vibration resistance Testing according to IEC 68-2-6 and IEC 68-2-36

< 30 dB V/m 25 V/m 1 m (free-fall onto steel plate) 20 g

*) **) ***) ****)

Others on request Integral linearity deviation (F.S. = Full Scale; B.F.S.L. = Best Fit Straight Line) The total error includes non-linearity, hysterese, repeatability and temperature influence Customer-specific special design with optional better exactness on request

- Mistakes and changes in the sense of technical improvements reserved. -

ADZ NAGANO GmbH Gesellschaft fr Sensortechnik Bergener Ring 43 D-01458 Ottendorf-Okrilla

Tel. + 49 (0) 35 205 - 59 69 30 Fax: + 49 (0) 35 205 - 59 69 59

eMail: [email protected] Internet: www.adz.de

You might also like