Scribd
Upload
116 views2 pages

Upgrade Procedure Step 1: DVP325x Firmware Upgrade

Uploaded by

Albio Ernesto Figueredo Betancourt

This document provides instructions for upgrading the firmware on DVP3254K/55 DVD player models. It describes downloading the firmware upgrade files, burning them to a CD or saving them to a USB flash drive, and inserting the disc or drive into the DVD player to initiate the automated upgrade process. The upgrade is expected to take 3-5 minutes to complete, after which the user should perform a default reset in the DVD player's setup menu. Caution is given not to interrupt power during the upgrade process.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Upgrade Procedure Step 1: DVP325x Firmware Upgrade

Uploaded by

Albio Ernesto Figueredo Betancourt
116 views2 pages
This document provides instructions for upgrading the firmware on DVP3254K/55 DVD player models. It describes downloading the firmware upgrade files, burning them to a CD or saving them to a USB flash drive, and inserting the disc or drive into the DVD player to initiate the automated upgrade process. The upgrade is expected to take 3-5 minutes to complete, after which the user should perform a default reset in the DVD player's setup menu. Caution is given not to interrupt power during the upgrade process.

Original Title

Dvp3254k 55 Fur Eng

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

This document provides instructions for upgrading the firmware on DVP3254K/55 DVD player models. It describes downloading the firmware upgrade files, burning them to a CD or saving them to a USB flash drive, and inserting the disc or drive into the DVD player to initiate the automated upgrade process. The upgrade is expected to take 3-5 minutes to complete, after which the user should perform a default reset in the DVD player's setup menu. Caution is given not to interrupt power during the upgrade process.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
116 views2 pages

Upgrade Procedure Step 1: DVP325x Firmware Upgrade

Uploaded by

Albio Ernesto Figueredo Betancourt
This document provides instructions for upgrading the firmware on DVP3254K/55 DVD player models. It describes downloading the firmware upgrade files, burning them to a CD or saving them to a USB flash drive, and inserting the disc or drive into the DVD player to initiate the automated upgrade process. The upgrade is expected to take 3-5 minutes to complete, after which the user should perform a default reset in the DVD player's setup menu. Caution is given not to interrupt power during the upgrade process.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2

DVP325x Firmware Upgrade

Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: DVP3254K/55 This firmware version improves: Click here for more details Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade!

Upgrade Procedure Step 1 Check your current version


First check your current firmware version to see if you need to upgrade: 1. 2. 3. 4. 5. POWER ON the set Press SETUP key to enter SETUP menu Press < or > to navigate to GENERAL menu Press keys 1,3,7,9 successively Proceed with firmware upgrade if your sets firmware version is below V18 or V50 (depending on the set you have)

Step 2 Download Firmware upgrade

Click the link to save the software on your computer.


Note: There are 2 methods to upgrade your DVD player. 1. For Optical Disc upgrade, follow STEP 3 to STEP 4. 2. For USB upgrade, follow STEP 5.

Step 3 Burning Upgrade on CD-R / CD-RW


1. 2. Extract the files by unzipping the zipped file (DVP3254K_55.zip) with WINZIP or an other application capable of handling zipped files (Do not rename the extracted files) Write the extracted files not the zip file onto a blank CD-R or CD-RW disc, using the following settings: - File System: ISO 9660 + Joliet - File name length : max11 chars = 8+3 (Level 1) - Mode : 2/XA - Character set : ISO 9660 (ISO normal CD-ROM) - No Multi Session - Write Speed : Low - Recording Method: Track At Once Note: The extracted files should not be placed in a folder on the disc but just in the top level directory (root). Finalize the disc. (The application may do this automatically.)

3.

Step 4 Apply Upgrade to your DVD Player


1. 2. 3. 4. 5. 6. 7. 8. Power on the set and put in the disc. A message will be displayed on the OSD after the upgrade file is recognized. Follow the instruction displayed on the TV Screen Press OK to upgrade (if applicable) After reading the file, the disc will be ejected. Remove the disc after ejected, but DO NOT close the tray Wait approximately 3-5 minutes for the software to be upgraded The set will restart itself once the upgrade is completed. Upon wake up, please perform a Default reset in the Preference page under setup menu

Caution: Do not unplug or power off the set while upgrading in progress.

Step 5 Upgrading the firmware of your DVD Player (USB)


Important: Remove any discs from the tray before USB device is inserted.
Note: Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the player may become defective. 1. Extract the firmware upgrade files from the ZIP archive(DVP3254K_55.zip): DVP3254K_55.bin DVP3254KI_55.bin (Do not rename the filename) Note: Please check to ensure that your USB storage device can be detected by the player before trying to upgrade the firmware using this method. If the USB storage device cannot be detected, please follow STEP 3 to STEP 4 to upgrade using an Optical Disc. Note: Please use a FLASH based USB storage device. The startup time for HDD based USB storage device is too slow and cannot be used for firmware upgrade. 2. 3. 4. 5. 6. 7. 8. Place the extracted files on a USB flash storage device (at least 64Mb in size). Turn the DVD Player on and when it is running, insert the USB flash storage device. A dialogue will now appear - follow the instructions to update the software of your DVD Player. When disc tray is ejected, you can now remove the USB storage device but DO NOT close the disc tray. Wait approximately 3-5 minutes for the software to be upgraded. The set will restart itself once the upgrade is completed. Upon wake up, please perform a Default reset in the Preference page under setup menu Note: Please make sure you delete the upgrade file from the USB device before using it on the player again. This will prevent the player from performing the upgrade again.

Your product is successfully upgraded!

Firmware upgrade history


Version
V18/V50

Description
Fix DivX file USB playback crash issues seen during end of playback

You might also like