Scribd
Upload
1K views2 pages

Generator Set Load Sharing of Paralleled Generators

Load sharing is the proportional division of total kW and kVAR load between multiple generator sets in a paralleled system. For kW load sharing, the engine speed governor of each generator set determines the share by increasing or decreasing fuel, without affecting frequency. For kVAR load sharing, the alternator field excitation system adjusts the share by increasing or decreasing field excitation, without affecting voltage. Both systems monitor and control load sharing in proportion to generator set ratings to avoid overloading and ensure stability.

Uploaded by

Laurian Ştefan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Generator Set Load Sharing of Paralleled Generators

Load sharing is the proportional division of total kW and kVAR load between multiple generator sets in a paralleled system. For kW load sharing, the engine speed governor of each generator set determines the share by increasing or decreasing fuel, without affecting frequency. For kVAR load sharing, the alternator field excitation system adjusts the share by increasing or decreasing field excitation, without affecting voltage. Both systems monitor and control load sharing in proportion to generator set ratings to avoid overloading and ensure stability.

Uploaded by

Laurian Ştefan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GENERATOR SET KW & KVAR LOAD SHARING IN A PARALLELED SYSTEM

LOAD SHARING Load sharing is defined as the proportional division of the kW and kVAR total load between multiple generator sets in a paralleled system. Load sharing is essential to avoid overloading and stability problems on the systems generator sets. ACTIVE POWER (KW) LOAD SHARING When generator sets operate in parallel, the engine speed governor of each generator set determines the proportional sharing of the total active power requirements (kW) of the system. The kW load sharing is achieved by increasing or decreasing fuel to the systems engines. As the fuel to the engine of one generator set in a group is increased it will not lead to an increase in speed and hence frequency (as it would if it were operating alone) but it will lead to an increase in the proportion of the total kW load that it will deliver. As the fuel to the engine of one generator set in a group is decreased it will not lead to a decrease in speed and hence frequency (as it would if it were operating alone) but it will lead to a decrease in the proportion of the total kW load that it will deliver. The control system of the generator sets (via the engine speed control system) monitors and controls the sharing of the total kW load in proportion to the relative rating of the engines on the systems generator sets.

REACTIVE POWER (KVAR) LOAD SHARING When generator sets operate in parallel the alternator field excitation system of each generator set controls the proportional sharing of the total reactive power requirements (kVAR) of the system. The kVAR load sharing is achieved by increasing or decreasing the field excitation to the systems alternators. As the field excitation of one generator set in a group is increased i.e. overexcited it will not lead to an increase in voltage (as it would if it were operating alone) but it will lead to an increase in the proportion of the total kVAR load it will deliver and a decrease in its power factor. As the field excitation of one generator set in a group is decreased i.e. underexcited it will not lead to a decrease in voltage (as it would if it were operating alone) but it will lead to a decrease in the proportion of the total kVAR it will deliver an increase in its power factor. An undesirable circulating reactive current (cross current) will flow in the system if the excitation of the alternators is not matched. The voltage control system of the generator sets (via the alternator voltage control system) monitors and controls the sharing of the total kVAR load in proportion to the relative rating of the alternators on the systems generator sets.

Created by J.M.J. Lloyd

Uncontrolled once printed

You might also like