Product Information Materials testing machine with ball lead screw drive Z600E
B1 B2
H1 H2 H3
T1
Figure: Zwick Z600E with hydraulic grips
Figure: Drawing of Zwick Z600E with hydraulic grips
Key benefits
Further advantages and features
These electro-mechanical materials testing machines
are fitted with a ball lead screw drive.
The load frame is robust and extremely stiff. Standard tests using Zwick testXpert software
require only single-button operation.
Wide measuring range allows precise determination of
even small test loads without re-tooling.
Long travel combined with comparatively low buildheight provides trouble-free specimen clamping and user-friendly testing over a wide range of specimen lengths.
Modular design throughout the system allows the
entire Zwick accessory range to be used, including a wide variety of extensometers, specimen grips and other test tools.
Low-maintenance, pre-stressed ball lead screws
ensure accurate, long-term tensile and compression testing.
Should new test requirements arise, additional test
tools (e.g. calibration blocks) are easily installed via a T-slot or screw system.
Can be tailored to customers specific requirements
(e.g. test area dimensions, test devices, specimen grips, test speed ranges, testing software).
PI 211 2.0209
PI211_Z600E.pmd
Product Information Materials testing machine with ball lead screw drive Z600E
Model Fmax [kN] [lb] Number of lead columns Number of drive columns (ball lead screws) Stiffness of load frame crosshead deflection and elongation of lead screw drive approx. [kN/mm] including load cell, hydraulic grips and drive approx. [kN/mm] Dimensions of load frame H1 Height [mm] B1 Width [mm] T1 Depth [mm] Dimensions test area H2 Height [mm] B2 Width [mm] Test stroke max. without tools / specimen grips [mm] H3 with hydraulic grips 8597 (including load cell) [mm] H4 with wedge grips 8520 (including load cell) [mm] Test speed [mm/min] Weight without tools / specimen grips (with electronics) [kg] with specimen grips [kg] Specific floor loading [kg/cm2] Resolution of crosshead travel [m/Impuls] Position accuracy [m] Item no. 1 Z600E 600 135000 2 2 680 330 2860 1414 842 1940 740 1840 1200 940 0.001 200 3200 3800 5.9 0.002 0.5 358432
(BPC-F0600EN.R09)
Environmental conditions Operating temperature [C] Storage temperature [C] Humidity range (not condensing) [%] Electrical connection Mains voltage 3 Ph/N/PE 2 3 [V] Mains frequency [Hz] Drive power without specimen grips [kVA] with hydraulic grips [kVA] Fuse [A] Noise level at 1m distance [dB(A)] Color coating of rack
1 2 3
+10 ... +35 -25 ... +55 < 90 400 50 / 60 14 17 32 < 70 RAL 7011 (iron gray), RAL 7038 (agate gray)
Z600E with 2 test areas available on request Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE < 10 % related to the mains voltage
All Data at ambient temperature.
All rights reserved.
