Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Good Acoustic Performance: Steel Industry Guidance Notes

    Uploaded by

    chernl2004
    1. Steel framed buildings can meet acoustic requirements for residential and other building types through good construction that provides mass, isolation, and sealed joints. 2. Composite floors are an effective way to construct separating floors, using a suspended ceiling and resilient flooring over a concrete slab. 3. Separating walls can be built with light steel framing, masonry, or timber, with details like double layers of board, insulation, and resilient bars improving sound insulation. 4. Junction details between elements are important to prevent flanking sound transmission around separations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Good Acoustic Performance: Steel Industry Guidance Notes

    Uploaded by

    chernl2004
    45 views2 pages
    1. Steel framed buildings can meet acoustic requirements for residential and other building types through good construction that provides mass, isolation, and sealed joints. 2. Composite floors are an effective way to construct separating floors, using a suspended ceiling and resilient flooring over a concrete slab. 3. Separating walls can be built with light steel framing, masonry, or timber, with details like double layers of board, insulation, and resilient bars improving sound insulation. 4. Junction details between elements are important to prevent flanking sound transmission around separations.

    Original Title

    Signs Sn01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Steel framed buildings can meet acoustic requirements for residential and other building types through good construction that provides mass, isolation, and sealed joints. 2. Composite floors are an effective way to construct separating floors, using a suspended ceiling and resilient flooring over a concrete slab. 3. Separating walls can be built with light steel framing, masonry, or timber, with details like double layers of board, insulation, and resilient bars improving sound insulation. 4. Junction details between elements are important to prevent flanking sound transmission around separations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views2 pages

    Good Acoustic Performance: Steel Industry Guidance Notes

    Uploaded by

    chernl2004
    1. Steel framed buildings can meet acoustic requirements for residential and other building types through good construction that provides mass, isolation, and sealed joints. 2. Composite floors are an effective way to construct separating floors, using a suspended ceiling and resilient flooring over a concrete slab. 3. Separating walls can be built with light steel framing, masonry, or timber, with details like double layers of board, insulation, and resilient bars improving sound insulation. 4. Junction details between elements are important to prevent flanking sound transmission around separations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    D158 SIGNS

    16/12/05

    2:03 pm

    Page 1

    SN01

    01/2006

    Good Acoustic Performance


    STEEL INDUSTRY GUIDANCE NOTES

    Good acoustic performance continues to be an important requirement in residential buildings as developers and occupants demand higher quality construction. The acoustic requirements of residential properties are given in Approved Document E of the Building Regulations. Acoustic requirements for other types of buildings such as schools and hospitals are given in separate documents. This note explains the basics of acoustics and shows how steel framed buildings can meet the acoustic requirements for all building types.
    Sound is caused when objects vibrate in air. The movement in turn causes air particles to vibrate giving rise to rapid pressure fluctuations which are detected by the ear. Sound levels and sound insulation values are expressed in decibels (dB). The sound insulation properties of walls or floors vary with frequency and, as most sounds are a mixture of several different frequencies, certain frequencies within a sound are likely to be attenuated more effectively than others by a given construction (low pitched sounds are normally attenuated less than high pitched sounds). In view of this, the sound reduction characteristics of walls and floors are usually measured at a number of different frequencies across the hearing range and then converted to single figure rating values.

    Compliance
    Compliance with Part E of the Building Regulations can only be demonstrated by either: 1. On-site pre-completion testing (PCT), or by 2. Following the Robust Details scheme and build using Robust Details. Robust Details Ltd publishes a handbook which contains all the details which currently have full RD status. The approval process is on-going and the handbook is updated at regular intervals. SCI publication P336 contains a large range of steel construction details that will pass the on-site testing when constructed correctly.

    Acoustic Regulations
    Amendments to Part E of the Building Regulations came into effect in July 2003. The regulations set more demanding requirements for the acoustic performance of separating floors and walls (see table below). The performance standards include airborne sound insulation of walls between dwellings (separating walls), and both airborne sound insulation and impact sound transmission for floors between dwellings (separating floors). Acoustic requirements from Approved Document E Building type Separating walls DnT,w+ Ctr 45 dB 43 dB 43 dB Separating floors DnT,w+ Ctr LnT,w 45 dB 43 dB 45 dB 62 dB 64 dB 62 dB

    Sound paths
    When a room is separated from another room, sound can travel by two routes; directly through the separating element (wall or floor) - direct transmission, and around the separating element through adjacent building elements flanking transmission. The design of the junctions between separating walls, separating floors, external walls and the integration of the primary steel frame and services are all important aspects to consider in order to avoid flanking sound transmission. It is straightforward to develop a wall or floor construction that will provide the necessary acoustic performance. However, ensuring that the junctions do not provide a weak point for sound transmission must not be overlooked. Good site practice is important to ensure that details are correctly constructed as specified, and that the primary steel frame is isolated from direct sound transfer.

    Purpose built dwellings Dwellings formed by material change of use Purpose built rooms for residential purposes Rooms for residential purposes formed by material change of use

    43 dB

    43 dB

    64 dB

    The information given in this Steel Industry Guidance Note is for general information only and the reader should always seek specific advice on any particular issue.

    D158 SIGNS

    16/12/05

    2:03 pm

    Page 2

    Composite floors
    Composite floors are a very effective way of constructing separating floors with good acoustic performance. The composite floor system relies on the use of some structural mass, a suspended plasterboard ceiling and a resilient floor system on the top surface to achieve excellent acoustic performance for both airborne and impact sound. The composite floor diagram below shows a battened floating floor treatment to the top surface of the slab. However, alternative solutions will also work such as a screed over an isolating layer and platform floors consisting of a walking surface board over an isolating layer which can be dense mineral wool.

    Separating walls
    Separating walls can be built in light steel framing, masonry or timber construction. The light steel frame separating walls normally comprise twin metal frames, two layers of gypsumbased board and insulation. A narrower, single metal frame separating wall can provide the necessary acoustic performance by incorporating resilient bars between the light steel frame and the gypsum-based board. Typical light steel separating wall

    Typical composite floor construction


    18 mm thick tongue and groove chipboard walking surface Proprietary battens with integral resilient foam strip

    Trapezoidal or re-entrant steel deck composite slab

    Metal frame for ceiling 1 layer of gypsum-based board (nominal 8 kg/m2 or 10 kg/m2)

    Acoustic detailing needs careful consideration for all forms of construction whether it be steel, timber, concrete or masonry. The combined principals of mass, isolation and sealing of joints should be applied for good acoustic performance.

    Key Points
    Part E of the Building Regulations applies to dwellings and rooms for residential purposes e.g. hotels and halls of residence. For schools, the guidance in Building Bulletin 93 The Acoustic Design of Schools (produced by the DfES) should be followed. For hospitals, the guidance in Health Technical Memorandum 2045 Acoustics - design considerations (produced by NHS Estates) should be followed. Use either on-site pre-completion testing (PCT) or Robust Details to demonstrate compliance with Part E. Provision of mass, isolation of elements and sealing of gaps and joints all influence the sound insulation between rooms. Flanking transmission of sound depends on the junction details and is just as important as direct transmission. There are currently four Robust Details for steel constructions and these are available from Robust Details Limited SCI publication P336 Acoustic Detailing for Multi-storey Residential Buildings provides a wide range of steel construction details that will meet the requirements of Part E.

    Further sources of Information


    1. 2. 3. 4. 5. 6. SCI publication P336: Acoustic Detailing for Multi-storey Residential Buildings (www.steelbiz.org) Advisory Desk Note 287: Acoustic detailing of steel columns within masonry separating walls (www.steelbiz.org) SCI publication P322: Acoustic performance of composite floors (www.steelbiz.org) SCI publication P321: Acoustic performance of Slimdek (www.steelbiz.org) SCI publication P320: Acoustic performance of light steel framed systems (www.steelbiz.org) Robust Details Ltd Handbook (www.robustdetails.com)

    You might also like