1. Prepare the necessary components which include a DB-25 connector, shielded audio cable with 3.5mm audio jacks, and an adapter from DB-25 to sound card.
2. Rearrange a yellow wire in the accessory connector of the Motorola PMKN4016 cable from contact 10 to contact 14.
3. The prepared components allow connecting a Motorola radio to a server using an audio cable and adapter.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
307 views4 pages
TRBOnet Cable Connector Example v2
1. Prepare the necessary components which include a DB-25 connector, shielded audio cable with 3.5mm audio jacks, and an adapter from DB-25 to sound card.
2. Rearrange a yellow wire in the accessory connector of the Motorola PMKN4016 cable from contact 10 to contact 14.
3. The prepared components allow connecting a Motorola radio to a server using an audio cable and adapter.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4
You can use a cable Motorola PMKN4016.
nn nopknkeuun rouo ucnonusoeafu kaenu Motorola PMKN4016.
Do the following: opaofae ero cnepykur opasor: 1. Prepare components: Rpuro1onu1e kounnek1ymmue: 1 item PasLer DB-25 F 1 uf. 1 item Kopnyc pnn pasLera DB-25 1 uf. 1 item Kaenu aypuo skpauupoeauuu c aypuo pasLeraru 3,5 rr 1 uf. 2. Rearrange a yellow wire in the accessory connector of cable PMKN4016 from contact 10 in contact 14. Repec1anu1u xen1m nponop e akceccyapuor pasLere kaenn PMKN4016 us koufakfa 10 e koufakf 14. before after po popaofku nocne popaofku Connector box DB-25 Shielded audio cable with 3.5 mm audio jacks Preparing of cable to connect MOTOTRBO to TRBOnet.RadioServer. Hsro1onneuue kaenn pnn nopknmueuun papuoc1auuuu MOTOTRBO k papuocepnepy TRBOnet. Connector DB-25 3. Prepare an adapter from DB-25 to sound card Hsro1onu1e nepexopuuk DB-25 <> 3nykonan kap1a: For sound card with microphone input. For sound card with line input. nn seykoeo kapfu c rukpoqouuur exopor nn seykoeo kapfu c nuueuur exopor
Connection Guide of The MOTOTRBO Radio To The Radioserver As A Control Station (Using The PMKN4147A Programming Cable and A Cable With The HLN9457 Connector)
Cable Preparation Guide For Connecting MOTOTRBO Radio As A Control Station To The Radioserver (Using HLN9457 Connector and PMKN4147A Programming Cable)
Refurbish Antique Telephones for Fun and Hobby: Step by Step Instructions to Take an Old Telephone and Return It to Its Original Working Order. No Electronics or Telephone Knowledge Needed.