Hand Held Multi-Gas Emissions Analyser: 900 PLUS

900 PLUS
O2 CO CO2 NO NOx SO2

Features
Big character display IR printer link... printed header can be customised Large memory to store results for easy transfer to PC Long life battery recharged in situ
Measures
Oxygen to 21 % Carbon Monoxide (CO) to 10,000ppm with hydrogen compensated sensor (alternatively CO to 100,000ppm with high range sensor) Nitric Oxide (NO) to 5000ppm with calculated NOx (alternatively NO to 100ppm with better low range accuracy) Sulphur Dioxide (SO2) to 5000ppm (Alternatively any toxic sensor can be replaced with a 1000ppm Nitrogen Dioxide (NO2) sensor) Inlet Temperature Flue Gas Temperature Differential pressure
Options
High range CO sensor instead of standard CO sensor Low range NO sensor in place of standard NO sensor NO2 sensor in place of any other toxic gas sensor SO2 sensor in place of any other toxic gas sensor
Optional Extras
KMIRP infra-red thermal paper printer KANE ImPrint infra-red plain paper printer
GAS ANALYSERS
Hand Held Multi-Gas Emissions Analyser KANE900 PLUS
Technical Specications KANE900 PLUS

GAS ANALYSERS
Parameter Temp Measurment Flue Temperature with Probe
Inlet Temperature Pressure Gas Measurment *1 Oxygen Carbon Monoxide
(standard: H compensated)
Resolution 0.1C/F
0.1C/F 0.1 mbar
Accuracy 2.0C 0.3% reading

1C 0.3% reading 2% of full scale
Range
0-12 00C / 32-2200oF

with suitable probe
0-50C 32-122F +150mbar to 150mbar 0-21% 0-10,000ppm
The KANE900 PLUS handheld analyser is easy to use for domestic and industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution. The KANE900 PLUS measures O2, flue and nett temperature and calculates CO2, boiler efficiency, excess air and losses. CO is measured with a hydrogen compensated sensor for increased accuracy. It also measures CO and calculates CO/CO2 ratio - The Poison Index - to give complete readings for effective boiler analysis and safety. The KANE900 PLUS measures NO and calculates NOx. Optionally, it can also measure either NO2 or SO2 and can be tted with CO and NO sensors with different measuring ranges. These options can be tted at time of purchase or when returned to an authorised Kane service centre at a later date. An optional pressure sensor can be fitted to measure flue draught. The KANE900 PLUS has a large memory to store readings and can transfer data to a printer or PC. The printout displays the time and date of each measurement as well as personalised information such as company name and telephone number. The KANE900 PLUS is supplied with a flue gas probe, protective rubber sleeve, battery charger, operators manual and carry case.
0.1% 1ppm
0.2% 20ppm <400ppm 5%<5000ppm 10%<5000ppm 5% reading from 0.1% to 10% 5ppm<100ppm 5%>100ppm 2ppm<30ppm 5ppm>30ppm 5ppm<100ppm 10ppm<500ppm 5%>500ppm 5ppm<100ppm 5%>100ppm 0.3% reading 1.0% reading 1.0% reading 0.2% 2C 0.3% reading 0.0001 0.01
Carbon Monoxide
(high range)
0.01% 1ppm 1ppm 1ppm
0-10% 0-5000ppm 0-100ppm 0-1000ppm
Nitric Oxide
(standard)
Nitric Oxide
(low range)
Nitrogen Dioxide
Sulphur Dioxide Calculations Carbon Dioxide *2 Losses Efficiency Excess Air Temp (Nett) CO/CO2 Ratio Poison Index Parameter Pre-programmed Fuels Dimensions: Weight Handset Probe Ambient Operating Range Power Supply (Battery Charger) Battery Life
1ppm
0-5000ppm
0.1% 0.1% 0.1% 0.1% 1.0C/F 0.0001 0.01% Description
0-99.9% 0-99.9% 0-99.9% 0-2885.0% 0-600C / 32-1112F 0-0.9999 0-99.99
Natural Gas, Town Gas, Gascor, Light Oil, Heavy Oil, Propane, Butane, Anthracite, Coke, Coal, Kinsale Gas 1Kg 220mm x 55mm x 120mm L 420mm x Dia 8mm with stainless steel shaft, type K thermocouple and 3m hose -5C to 5 0C / 10% to 90% RH non condensing Input: 110Vac / 220Vac nominal >6 hours from full charge Output: 12Vac off load *1 Using dry gases at STP *2 Calculated
Your distributor
Kane International Limited Kane House, Swallowfield, Welwyn Garden City, Hertfordshire, AL7 1JG, United Kingdom Tel: +44 (0) 1707 375550 Email: [email protected] Fax: +44 (0) 1707 393277 Web: www.kane.co.uk
Warranty
All Kane International Limited products are warranted for 12 months from the date of purchase. This warranty covers any defects in materials or manufacturing. Kane International Limited specialise in the design, manufacture and marketing of electronic instruments for monitoring and optimising both energy usage and emissions from energy processes. Our Policy is to continuously develop and improve our products and so we reserve the right to change any part of our product specifications without prior notice.
Ref: KA900PLUS06
The KANE logo is a registered trademark of Kane International Ltd.

Hand Held Multi-Gas Emissions Analyser: 900 PLUS

Uploaded by

Copyright:

Available Formats

Hand Held Multi-Gas Emissions Analyser: 900 PLUS

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hand Held Multi-Gas Emissions Analyser: 900 PLUS

Uploaded by

Copyright:

Available Formats

900 PLUS

O2 CO CO2 NO NOx SO2

Hand Held Multi-Gas Emissions Analyser KANE900 PLUS

Technical Specications KANE900 PLUS

Accuracy 2.0C 0.3% reading

0-12 00C / 32-2200oF

0-50C 32-122F +150mbar to 150mbar 0-21% 0-10,000ppm

0.01% 1ppm 1ppm 1ppm

0-10% 0-5000ppm 0-100ppm 0-1000ppm

0.1% 0.1% 0.1% 0.1% 1.0C/F 0.0001 0.01% Description

0-99.9% 0-99.9% 0-99.9% 0-2885.0% 0-600C / 32-1112F 0-0.9999 0-99.99

You might also like