Scribd
Upload
160 views4 pages

CCNP Switch LAB 7-1 Results..Telephony Support

The document discusses configuration of switches for IP telephony support. It shows the output of various show commands that display configuration details such as interface trunking settings, port channel protocols, VLAN configurations, HSRP settings, routing tables, auto QoS settings, and QoS policies on different interfaces.

Uploaded by

Bijay Banstola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
160 views4 pages

CCNP Switch LAB 7-1 Results..Telephony Support

The document discusses configuration of switches for IP telephony support. It shows the output of various show commands that display configuration details such as interface trunking settings, port channel protocols, VLAN configurations, HSRP settings, routing tables, auto QoS settings, and QoS policies on different interfaces.

Uploaded by

Bijay Banstola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

LAB 7-1:: CONFIGURING SWITCHES FOR IP TELEPHONY SUPPORT DLS1#sh interfaces tru Port Po1 Po2 Po3 Port

Po1 Po2 Po3 Port Po1 Po2 Po3 Port Po1 Po2 Po3 Mode on on on Encapsulation Status 802.1q trunking 1 802.1q trunking 1 802.1q trunking 1 Native vlan

Vlans allowed on trunk 1-4094 1-4094 1-4094 Vlans allowed and active in management domain 1,10,20,30 1,10,20,30 1,10,20,30 Vlans in spanning tree forwarding state and not pruned 1,10,20,30 1,10,20,30 1,10,20,30

DLS1#sh eth su Flags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use f - failed to allocate aggregator M - not in use, minimum links not met u - unsuitable for bundling w - waiting to be aggregated d - default port

Number of channel-groups in use: 3 Number of aggregators: 3

Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------1 Po1(SU) LACP Fa0/11(P) Fa0/12(P) 2 Po2(SU) LACP Fa0/9(P) Fa0/10(P) 3 Po3(SU) LACP Fa0/7(P) Fa0/8(P)

DLS1#sh vtp status VTP Version capable : 1 to 3 VTP version running :2 VTP Domain Name : SWPOD VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 0021.a15c.1880 Configuration last modified by 172.16.1.3 at 3-1-93 00:32:45 Local updater ID is 172.16.1.3 on interface Vl1 (lowest numbered VLAN interface found) Feature VLAN: -------------VTP Operating Mode : Server Maximum VLANs supported locally : 1005 Number of existing VLANs :8 Configuration Revision :4 MD5 digest : 0xBB 0xB3 0xBA 0x4C 0xC2 0xDB 0xEE 0x65 0x20 0x67 0xFA 0x04 0x53 0x0C 0x55 0x53

DLS1#sh standby br P indicates configured to preempt. | Interface Grp Pri P State Active Standby Virtual IP Vl1 1 150 P Active local 172.16.1.4 172.16.1.1 Vl10 1 150 P Active local 172.16.10.4 172.16.10.1 Vl20 1 100 P Standby 172.16.20.4 local 172.16.20.1 Vl30 1 100 P Standby 172.16.30.4 local 172.16.30.1

DLS1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2

i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 172.16.0.0/24 is subnetted, 4 subnets 172.16.30.0 is directly connected, Vlan30 172.16.20.0 is directly connected, Vlan20 172.16.10.0 is directly connected, Vlan10 172.16.1.0 is directly connected, Vlan1

C C C C

DLS1#show auto qos interface FastEthernet0/7 auto qos voip trust FastEthernet0/8 auto qos voip trust FastEthernet0/9 auto qos voip trust FastEthernet0/10 auto qos voip trust FastEthernet0/11 auto qos voip trust FastEthernet0/12 auto qos voip trust

DLS1#show mls qos interface fastEthernet 0/7 FastEthernet0/7 trust state: trust cos trust mode: trust cos trust enabled flag: ena COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none qos mode: port-based

ALS1#show mls qos interface fastEthernet 0/15 FastEthernet0/15 Attached policy-map for Ingress: AUTOQOS-SRND4-CISCOPHONE-POLICY trust state: not trusted trust mode: trust cos trust enabled flag: dis COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: cisco-phone qos mode: port-based

ALS1#show run interface fastEthernet 0/15 Building configuration... Current configuration : 328 bytes ! interface FastEthernet0/15 switchport access vlan 10 switchport mode access switchport voice vlan 20 srr-queue bandwidth share 1 30 35 5 priority-queue out mls qos trust device cisco-phone mls qos trust cos auto qos voip cisco-phone spanning-tree portfast service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY end

ALS2#show mls qos interface fastEthernet 0/5 FastEthernet0/5 trust state: trust cos trust mode: trust cos trust enabled flag: ena COS override: dis default COS: 3 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none qos mode: port-based

You might also like