- 1 -

Muratec printer/scanner drivers and OfceBridge

Install/Uninstall for Windows 7
Installing printer/scanner drivers through a USB connection, page 1
Installing printer/scanner drivers for a network connection, page 6
Installaing OfceBridge, page 10
Uninstalling, page 11
Installing printer/scanner drivers through a USB connection
NOTE
Do NOT connect the USB cable before installing the driver.
To install the driver, you need to logon as an administrator.
For PCL printer driver option, the driver CD contains the PCL6 and PCL5e printer driver.
If you want to change the driver after installing the driver, uninstall the driver then instal the other one.
If you want to install both PCL6 and PCL5e drivers, use the Add Printer Wizard. (See Installing using
the Add Printer Wizard, page 4.)
Before you start the installation, please change the setting of Windows not to download the driver from the
web site. If you do not change this setting, installation may take longer time.
After you have nished the installation, you may better return the setting that you changed.
Click [Start], right-click [Computer] and click Properties from the list.
1
Click Advanced system settings.
2

When the User Account Control dialog box appears, enter an administrator password or provide
conrmation.
Click Hardware tab, and click [Device Installation Settings].
3

- 2 -
Select No, let me choose what to do and choose Never install driver software from Windows Update.
4

Click [Save Changes], and close the System Properties screen.
5
Installing the driver
Insert the driver CD into the CD-ROM drive.
1
The driver installation window will appear automatically. If not, run the Setup.exe located on the root
directory of the CD-ROM.

NOTE
When the AutoPlay dialog box appears, click [Run Setup.exe].
When the User Account Control dialog box appears, enter an administrator password or provide
conrmation.
If required, choose your language, then click [Next].
2
Click [Next].
3
After reading and accepting the License Agreement, click [Yes].
4
Otherwise, click [No] to cancel the installation.
If the model name selection screen appears, choose the model name of your machine, then click [Next].
5
Select Local (or USB), then click [Next].
6
Follow
7
the instructions that appear on the screen until you can click [Finish].
During the driver installation, if the Windows Security dialog box appears, click [Install this driver
software anyway].

After you have installed the driver, plug the USB cable into the machine and then connect it to the com-
8
puter.
Turn the machine on.
9
The driver software will be installed automatically. When the installation is completed, you will see the
following message.

After installation, congure the device setting if an optional device has been installed on the machine.
See Setting up the device options (page 3), for instructions on how to do this.
- 3 -
Setting up the device options
If an optional device has been installed on your machine, setup the Device Options setting by following
procedures.
Click [Start], and then click [Control Panel].
1
Click View devices and printers underneath the Hardware and Sound heading.
2

Right-click the icon of your printer, then click [Printing Preferences].
3

Click the Device Option tab.
4
Select the optional device installed to the machine.
5
Click [OK] to save the setting and close the printing preferences.
6
- 4 -
Installing using the Add Printer Wizard
For PCL printer driver option, the driver CD contains the PCL6 and PCL5e printer driver. If you want to install
both drivers connecting with the USB interface, rst nish installation of one driver using the installer and then
install the other using the Add Printer Wizard.
Click [Start], and then click [Control Panel].
1
Click View devices and printers underneath the Hardware and Sound heading.
2

Click Add a printer.
3

Click Add a local printer.
4

Select Use an existing port and choose a USB Virtual printer port, and then click [Next].
5

- 5 -
Insert the PCL printer driver CD into the CD-ROM drive, then click [Have Disk...].
6

Click [Browse] to select the folder containing the driver you wish to install.
7

You can select the driver from the following folders on the CD-ROM.
PCL6 driver
For 32 bit computer operating system
\Win7_Vista_2008\Win_x86\Driver\(Language)\(Machine name)\(Win7_Vista_x86)\PCL6
For 64 bit computer operating system
\Win7_Vista_2008\Win_x64\Driver\(Language)\(Machine name)\(Win7_Vista_x64)\PCL6
PCL5e
For 32 bit computer operating system
\Win7_Vista_2008\Win_x86\Driver\(Language)\(Machine name)\(Win7_Vista_x86)\PCL5e
For 64 bit computer operating system
\Win7_Vista_2008\Win_x64\Driver\(Language)\(Machine name)\(Win7_Vista_x64)\PCL5e

NOTE
Language, Machine name, Win7_Vista_x86, and Win7_Vista_x64 folder may not appear
depending on the driver CD-ROM.
Win_x86 is for 32 bit, Win_x64 is for 64 bit computer operating system.
To conrm your computer system type, click [Start], right-click [Computer] and click Properties from
the list. You will see the system type underneath System heading.
Select the *.inf le (there should only be one you can select), and click [Open].
8
Click [OK] in the Install From Disk window.
9
Click a name for your machine in the Install the printer driver window, and then click [Next].
10
Conrm the printer name that you have selected and click [Next].
11
Decide whether you wan to share the printer or not and choose the appropriate answer, then click
12
[Next].
You may print a test page at this point if you wish. After the page prints, click [Finish].
13
Installation is complete.

- 6 -
Installing printer/scanner drivers for a network connection
Installing the driver
Insert the driver CD into the CD-ROM drive.
1
The driver installation window will appear automatically. If not, run the Setup.exe located on the root
directory of the CD-ROM.

NOTE
When the AutoPlay dialog box appears, click [Run Setup.exe].
When the User Account Control dialog box appears, enter an administrator password or provide
conrmation.
If required, choose your language, then click [Next].
2
Click [Next].
3
After reading and accepting the License Agreement, then click [Yes].
4
Otherwise, click [No] to cancel the installation.
If the model name selection screen appears, choose the model name of your machine, then click [Next].
5
Select Network (or LAN), then click [Next].
6
Choose the driver(s) you want to install, then click [Next].
7
For GDI printer, enter the IP address of your machine and then click [Next].
8
For PCL driver, the printer port is automatically set for FILE and you should change the port manually.
(See Conguring the network printer port, page 7). However if you choose the scanner driver, enter
the IP address of your machine for scanner driver in this step.
Conrm the displayed contents and click [Next].
9

NOTE
If the Windows Security dialog box appears, click [Install this driver software anyway].

Restart the computer.
10
For GDI printer, installation is complete.
11
For PCL printer, proceed to the Conguring the network printer port on next page to change the printer
port.
- 7 -
Conguring the network printer port
Click [Start], and then click [Control Panel].
1
Click View devices and printers underneath the Hardware and Sound heading.
2
Right-click on the icon for your printer and select Printer properties from the list.
3

Click on the Ports tab and you will notice that the port selected is FILE.
4
Click [Add Port...].
5

Select Standard TCP/IP Port and then click [New Port].
6

The Add Standard TCP/IP Printer Port Wizard window will appear, click [Next].
7

- 8 -
Enter the IP address of your machine and then click [Next].
8

When the Additional Port Information Required window appears, leave it set to Standard with
9
Generic Network Card and click [Next].

Click [Finish].
10

Click [Close].
11

- 9 -
Conrm that the TCP/IP port you created is selected for your machine, and then click [Apply].
12

Click on the General tab and click the [Print Test Page] and make sure it prints correctly.
- 10 -
Installaing OfceBridge
Installing the drivers and utilities
Assign an IP address to the machine. (Consult your network administrator.)
1
Insert the CD into the CD-ROM drive.
2
The driver installation window will appear automatically. If not, run the Setup.exe located on the root
directory of the CD-ROM.

NOTE
When the AutoPlay dialog box appears, click [Run Setup.exe].
When the User Account Control dialog box appears, enter an administrator password or provide
conrmation.
If required, choose your language, then click [Next].
3
Click [Next].
4
After reading and accepting the License Agreement, then click [Yes].
5
Otherwise, click [No] to cancel the installation.
Follow the instruction appears on the screen until you can click [Finish].
6
After restarting the computer, the Environment settings dialog will appear if you have installed Ofce-
7
Bridge InforMonitor and/or OfceBridge Document Download Manager.
Click User settings and [Search]. OfceBridge user 001 will be selected, then click [OK].
For information on using the drivers and utilities, please refer to the manual contained on the CD.

NOTE
The "Windows Security Alert dialog will appear when nfoMonitor and ServerSearch(SSearch) pro-
gram, or TWAIN connector driver initially start. In this case, click [Allow access].

When the "User Account Control dialog box appears, enter an administrator password or provide
conrmation.
- 11 -
Uninstalling
Click [Start], and then click [Control Panel].
1
Under the Programs heading, click Uninstall a program.
2
Select the driver or program you want to uninstall, and then click [Uninstall].
3


NOTE
If the User Account Control window appear, enter an administrator password or provide conrmation.
The uninstaller program screen appears, click [Delete] and follow the onscreen instructions.
4
Click [Delete] and follow the instructions that appear on the window.
5
Restart your computer. Uninstall is completed.
6