Scribd
Upload
138 views3 pages

6 Spectro

This document outlines the procedure for determining the concentration of phosphate in a water sample using spectrophotometric analysis. The objectives are to practice dilutions, construct calibration curves from absorbance measurements of standard phosphate solutions, and determine the concentration of an unknown sample. Students will prepare standard solutions, take absorbance readings to generate calibration curves showing the relationship between absorbance and concentration, and use the calibration curve to determine the concentration of an unknown phosphate solution based on its absorbance.

Uploaded by

OmSilence2651
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views3 pages

6 Spectro

This document outlines the procedure for determining the concentration of phosphate in a water sample using spectrophotometric analysis. The objectives are to practice dilutions, construct calibration curves from absorbance measurements of standard phosphate solutions, and determine the concentration of an unknown sample. Students will prepare standard solutions, take absorbance readings to generate calibration curves showing the relationship between absorbance and concentration, and use the calibration curve to determine the concentration of an unknown phosphate solution based on its absorbance.

Uploaded by

OmSilence2651
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

OBJECTIVES

Spectrophotometric Analysis
School Chem. & Chem. Tech.

Practice calculating and performing dilutions of solutions. Determine the concentration of phosphate in a water sample by spectrophotometric analysis. Construct and utilize an absorbance and calibration curve. Explore the dynamics of working with a larger group of students

BACKGROUND
Spectrophotometric Analysis and the Determination of Phosphate The Absorbance Curve The Calibration Curve

Chromogenic Reaction of Phosphate

NH4VO3 + MoO42- +PO43 (NH4) 3PO4 NH4VO3 16MoO3


Chromogenic Reagent, AV solution

Spectrophotometric Analysis and the Determination of Phosphate(1)

Spectrophotometric Analysis and the Determination of Phosphate(2)

Spectrophotometric Analysis and the Determination of Phosphate(3)

Spectrophotometric Analysis and the Determination of Phosphate(4)

P0

%T = (

P ) 100% P0

T-Transmittance A-Absorbance

Complementary color

Color absorbed or transmitted?

%T A = log( ) 100 A = bc

-molar absorptivity
b-solution path length c-molar concentration

Beer-Lambert Law

The Absorbance Curve


max
0 .3

The Calibration Curve


0.28 0.24

max
Absorbance

0.20 0.16 0.12 0.08 0.04

Ax=0.180,cx=?

Absorbance

0 .2

0 .1

0 .0 400

410

420

430

440

450

460

0.00002 0.00004 0.00006 0.00008 0.00010

W a v e le n g t h ( n m )

Concentration of phosphate (M)

PROCEDURE-- Part A.
Organizing your group
Prepare a group of phosphate solutions with concentrations range from 1.0010-5 M to 4.0010-4 M. Each student is responsible for make at least one of the solutions and measuring at least one data point of Absorbance.

PROCEDURE-- Part B.
Preparation of Standard Solutions
1. Pipet 0.00,1.00,2.00,3.00,4.00,5.00mL 1.0010-3 M phosphate stock solution into 1# 6# 50-mL volumetric flasks, respectively. 2. Pipet 2.00 mL 2M HNO3 solution into each 1# 6# 50-mL volumetric flask. 3. Pipet 1.00 mL of the ammonium vanadomolybdate stock solution into each 1# 6# 50-mL volumetric flask. 4. Dilute the solution by filling the volumetric flask until the meniscus reach the mark.

PROCEDURE-- Part C.
Adjusting the Spectrophotometer
1. Turn on the spectrometer to warm-up (15min). 2. Adjust the wavelenth to 400nm. Use a blackblock to adjust T=0%. 3. Wash and rinse the cuvettes. Insert a cuvette filled with blank solution to set T=100%.

PROCEDURE-- Part E.
Making the Absorbance Curve
1. Rinse another cuvette and fill the rinsed cuvette with the 6# solution. 2. Insert the cuvette into the spectrometer. Measure and record A in 400-450nm every 10nm. 3. Find max.

PROCEDURE-- Part F.
Making the Calibration Curve Using the standard Solutions
1. Rinse the same cuvette, fill the rinsed cuvette with the 1# solution. 2. Insert the cuvette into the spectrometer. Measure and record A at max. 3. Repeat above step for 2# -5# solutions . (All data points for a given curve must be measured with the same cuvette)

PROCEDURE-- Part G.
Determination of Unknown Concentration
1. Pipet 5.00 mL of the unknown, 2.00 mL HNO3 and 1.00 mL of the ammonium vanadomolybdate solution into 7 # 50-mL volumetric flask. 2. Dilute the solution by filling the volumetric flask until the meniscus reach the mark. 3. Half-fill the rinsed cuvette with the unknown solution. Use the spectrometer to measure A. 4. Determination of unknown concentration by using the calibration curve.

Data?
Make the curves using a computer
0.28

Absorbance

Softwares, such as excel and origin

0.24 0.20 0.16 0.12 0.08 0.04 0.00002 0.00004 0.00006 0.00008 0.00010

Ax=0.180,cx=?

Concentration of phosphate (M)

You might also like