Scribd
Upload
473 views10 pages

Safety Requirements Specification SIF Specification Form

This 9 page document is a safety requirement specification form for an unnamed safety instrumented function (SIF). It details the requirements for the SIF, including functional description, demand rate, safety integrity level targeting, triggering and reset functionality, interface requirements, proof testing needs, and environmental and concurrent event protections. The document was issued by an organization for examination, approval, and is intended to specify requirements for a SIF to ensure safe process operation.

Uploaded by

bepperiga
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
473 views10 pages

Safety Requirements Specification SIF Specification Form

This 9 page document is a safety requirement specification form for an unnamed safety instrumented function (SIF). It details the requirements for the SIF, including functional description, demand rate, safety integrity level targeting, triggering and reset functionality, interface requirements, proof testing needs, and environmental and concurrent event protections. The document was issued by an organization for examination, approval, and is intended to specify requirements for a SIF to ensure safe process operation.

Uploaded by

bepperiga
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Page 1 Safety Requirement Specification SIF ID: SIF specification form ver: 1.

0 SIF name:

This form is one of the results of the research project SafeProd supported by VINNOVA (Swedish Agency for Innovation Systems). More information about the project could be found at www.sp.se/safeprod. A. Document issued for: Project: Company: Process: Plant / Site: B. Document source: Risk assessment by:

Organization:

Date:

SIF specification issued by:

Organization:

Date:

SIF specification examined by:

Organization:

Date:

SIF specification approved by:

Organization:

Date:

Comments on this form are gratefully received by Johan Hedberg at SP Swedish National Testing and Research Institute mailto:[email protected]

Quoting of this report is allowed but please remember to state the source!

www.sp.se/safeprod

Page 2 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

C. Related documents: Document ID: Type:

Rev:

Comments:

D. Document history: Rev: Change description: Date:

Sign:

www.sp.se/safeprod

Page 3 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

1. Functional description: Description of hazardous event, consequences and protection:

Defined safe process state:

Operative demand:

2. Primary actions / sequence (for bringing the process to the defined safe state):

3. Secondary actions / sequence (for operational reasons):

www.sp.se/safeprod

Page 4 Safety Requirement Specification SIF ID: 4. Demand rate and Safety integrity: Estimated demand sources: SIF specification form ver: 1.0 SIF name: Est. demand rates

Estimated SIF demand rate:


Used likelihood analysis method:

Low Demand, High Demand or Continuous mode of operation: Established target SIL (Safety Integrity Level):
Used SIL-selection method:

www.sp.se/safeprod

Page 5 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

5. Trigging / Tripping: Automatic trigging and trigging detection:

Yes/No?

Manual trigging:

Yes/No?

Trigging response and delay time requirements:

Max. response time:

6. Reset / Restart: Automatic reset and reset detection:

Yes/No?

Manual reset:

Yes/No?

Reset response and delay time requirements:

Max. response time:

7. Overriding, Inhibiting and Bypassing: Description of Overriding, Inhibiting and Bypassing functions:

Yes/No?

www.sp.se/safeprod

Page 6 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

8. Spurious trips and reset failures: Maximum allowable spurious trip rate: Estimated consequences of nuisance trips:

Maximum allowable reset failure rate: Estimated consequences of reset failures:

9. Final elements description: Description of output actions:

Defined fail-safe positions of final elements:

Fail-safe position OPEN/CLOSED?

Justification of the defined fail-safe positions:

Final elements specification:

TAG-name:

Equipment type:

Req

Actuator action:

Requirements for successful operation of final elements:

www.sp.se/safeprod

Page 7 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

10. Fail-safe process output description: Digital fail-safe outputs:


Digital output description: I/O-name: Device: Req

1
Trip action: ENERGIZE/ DE-ENERGIZE?

Output circuits requirements:

11. Fail-safe process input and trip limit description: Digital fail-safe inputs:
Digital input description: I/O-name: I/O-voting Req

6
Work. circuit

Analogue fail-safe inputs:


Analogue input description: I/O-name: I/O-voting Req

3
Trip limit:

Input circuit requirements:

www.sp.se/safeprod

Page 8 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

12. BPCS and other systems interface: Digital outputs (non fail-safe):
Digital output description: I/O-name: To system: Action:

Digital inputs (non fail-safe):


Digital input description: I/O-name: From system: Action:

Other type of output interface signals:


Other type output signal description: Type: I/O-name: To system: Action:

Other type of input interface signals:


Other type input signal description: Type: I/O-name: From system: Action:

13. Requirements for proof test intervals: Desired full proof test interval: Full proof test possible during operation: Partial proof test possible during operation: Special proof test design requirements:

Yes/No? Yes/No?

www.sp.se/safeprod

Page 9 Safety Requirement Specification SIF ID: SIF specification form ver: 1.0 SIF name:

14. Relationship between process inputs and outputs: Logical description:

Trigging and reset:

Actuating:

15. Operator interfaces (HMI): Panels / Buttons:

Graphics:

Generation of alarms:

Generation of events:

Alarm and event logging:

www.sp.se/safeprod

Safety Requirement Specification SIF ID:

SIF specification form ver: 1.0 SIF name:

Page 10

16. Requirements for protecting the SIF from special environmental conditions: Requirements:

17. Requirements for protecting the SIF from major accidents: Requirements:

18. Consequential hazards (due to implementation of the SIF): Discovered consequential hazards:

Hazards due to concurrently occurring events:

Possible risk reducing measures:

www.sp.se/safeprod

You might also like