Dsa 284557 PDF

Bulletin PD-20754 04/01
STPS1045B
SCHOTTKY RECTIFIER 10 Amp
D-Pak (TO-252AA)
Major Ratings and Characteristics Characteristics

IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 s sine @ 10 Apk, TJ = 125C range
Description/Features
The STPS1045B surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Small foot print, surface moutable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
STPS1045B Units
10 45 390 0.57 - 40 to 175 A V A V C
6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 4 1.27 (0.05) 0.88 (0.03)
2.38 (0.09) 2.19 (0.08)
1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02)
MINIMUM RECOMMENDED FOOTPRINT

5.97 (0.24)
6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 1 2 3 5.97 (0.23) 10.42 (0.41) 9.40 (0.37) 0.51 (0.02) MIN. 5.68 (0.22) 6.48 (0.26) 10.67 (0.42)
1.52 (0.06) 1.15 (0.04) 1.14 (0.04) 0.76 (0.03) 2.28 (0.09) 2x 4.57 (0.18) 3x 0.89 (0.03) 0.64 (0.02)
2x 2.54 (0.10) 2.28 (0.09) 1.65 (0.06) 2x

BASE CATHODE
0.58 (0.02) 0.46 (0.02)
2x
2x
1 - Anode 2 - Cathode 3 - Anode 4 - Cathode
Conform to JEDEC outline D-Pak (Similar to TO-252AA) Dimensions in millimeters and (inches)
ANODE CATHODE ANODE
www.irf.com
STPS1045B
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
STPS1045B
45
Absolute Maximum Ratings

Parameters
IF(AV) Max. Average Forward Current * See Fig. 5 IFSM Max.PeakOneCycleNon-Repetitive Surge Current * See Fig. 7
Value
10 390 75
Units Conditions
A A 50% duty cycle @ TC = 151 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop * See Fig. 1 (1)
Value
0.63 0.84 0.57 0.72
Units Conditions
V V V V mA mA pF nH V/ s @ 10A @ 20A @ 10A @ 20A TJ = 25 C TJ = 125 C V
R
TJ = 25 C TJ = 125 C VR = rated VR (test signal range 100Khz to 1Mhz) 25 C
IRM CT LS
Max. Reverse Leakage Current * See Fig. 2 (1) Typical Junction Capacitance Typical Series Inductance
0.2 15 760 5.0 10000
= 5V
DC
Measured lead to lead 5mm from package body (Rated VR)
dv/dt Max. Voltage Rate of Change

(1) Pulse Width < 300s, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max.JunctionTemperatureRange Max.StorageTemperatureRange
Value
- 40 to 175 - 40 to 175 3.0 50 0.3 (0.01) D - PAK
Units Conditions
C C C/W DCoperation C/W g (oz.) Similar to TO-252AA * See Fig. 4
RthJC Max.ThermalResistanceJunction to Case RthJA Max.ThermalResistanceJunction to Ambient wt Approximate Weight Case Style
www.irf.com
STPS1045B
100
1000
T = 175C
100
Reverse Current (mA)
150C 125C 100C
10 1
75C
0.1 0.01
50C 25C
Instantaneous Forward Current - I F (A)
0.001 0.0001 0
10
10
20
30
40
50
Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage
10000
Junction Capacitance - C T (pF)
T J = 25C
Tj = 175C Tj = 125C Tj = 25C
1000
1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2

Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics
100 0 10 20 30 40 50
Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
10
Thermal Impedance - Z thJC (C/W)
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
PDM
t1
0.1
Single Pulse (Thermal Resistance)
Notes: 1. Duty factor D = t1/ t2
t2
2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001
0.001
0.01
0.1
thJC
10
t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance Z Characteristics
www.irf.com
STPS1045B
180
Allowable Case Temperature (C) Average Power Loss (Watts)
16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16
DC D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit
170
DC
160
150
Square wave (D = 0.50) 80% Rated Vr applied
see note (2)
140 0 2 4 6 8 10 12 14 16
Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current
Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics
Non-Repetitive Surge Current - I FSM (A)
1000
100
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge
10 10
100
1000
10000
Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
www.irf.com
STPS1045B
Marking Information
EXAMPLE: THIS IS A STPS1045B
INTERNATIONAL RECTIFIER LOGO 4 (K) PART NUMBER
STPS1045B 9712 5K3A

ASSEMBLY LOT CODE 2 (K) DATE CODE (YYWW) YY = YEAR WW = WEEK
1 (A)
3 (A)
Tape & Reel Information

4.1 (0.16) 3.9 (0.15) TR 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 12.1 (0.48) 11.9 (0.47) 2.6 (0.10) DIA. 1.5 (0.06) 0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62)
7.0 (0.28) 6.8 (0.26) 2.75 (0.11) 2.55 (0.10)
FEED DIRECTION
4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07)
1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29)
0.35 (0.01) 0.25 (0.01)
10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10)
16.3 (0.64) 15.7 (0.62)
FEED DIRECTION
8.1 (0.32) 7.9 (0.31)
2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29)
4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07)
0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62)
10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10)
FEED DIRECTION
8.1 (0.32) 7.9 (0.31)
2.6 (0.10) DIA. 1.5 (0.06)
13 (0.52) DIA.
22.4 (0.88)
TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR.
375 (14.17) DIA. MAX.
50 (1.97) DIA.
www.irf.com
STPS1045B
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 04/01
www.irf.com

Dsa 284557 PDF

Uploaded by

Copyright:

Available Formats

Dsa 284557 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dsa 284557 PDF

Uploaded by

Copyright:

Available Formats

Bulletin PD-20754 04/01

Major Ratings and Characteristics Characteristics

2.38 (0.09) 2.19 (0.08)

1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02)

MINIMUM RECOMMENDED FOOTPRINT

2x 2.54 (0.10) 2.28 (0.09) 1.65 (0.06) 2x

0.58 (0.02) 0.46 (0.02)

1 - Anode 2 - Cathode 3 - Anode 4 - Cathode

ANODE CATHODE ANODE

Absolute Maximum Ratings

TJ = 25 C TJ = 125 C VR = rated VR (test signal range 100Khz to 1Mhz) 25 C

0.2 15 760 5.0 10000

Measured lead to lead 5mm from package body (Rated VR)

dv/dt Max. Voltage Rate of Change

150C 125C 100C

Instantaneous Forward Current - I F (A)

Tj = 175C Tj = 125C Tj = 25C

1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2

D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20

2. Peak Tj = Pdm x ZthJC + Tc

Square wave (D = 0.50) 80% Rated Vr applied

see note (2)

Non-Repetitive Surge Current - I FSM (A)

STPS1045B 9712 5K3A

Tape & Reel Information

7.0 (0.28) 6.8 (0.26) 2.75 (0.11) 2.55 (0.10)

4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07)

0.35 (0.01) 0.25 (0.01)

10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10)

16.3 (0.64) 15.7 (0.62)

8.1 (0.32) 7.9 (0.31)

4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07)

0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62)

10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10)

8.1 (0.32) 7.9 (0.31)

2.6 (0.10) DIA. 1.5 (0.06)

375 (14.17) DIA. MAX.

You might also like