juki coverstitch sewing machine
varriants - 2 needle or 3 needle
MF-7800. High-Speed, Cylinder-Bed, Top & Bottom Coverstitch Machine.
The machine produces seams.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine
MF-7800 series MF-7822 MF-7823 (2-needle, top and bottom coverstitch machine) (3-needle, top and bottom coverstitch machine)
MF-7823U10B56
MF-7823K10B56
MF-7823U10B56
MF-7823K10B56
The machine produces seams, which match materials and thread with consistency. Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
Well-tensed seam
Soft-seam
Optimization of the thread take-up mechanism and top covering thread path route The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
Simple maintenance mechanism
The machine is provided with a variety of mechanisms, which have been developed in consideration of production sites. The mechanisms can be easily maintained, contributing to increased production efficiency.
Looper thread twining prevention mechanism
The looper thread cam has been provided with a thread wrapping prevention device. In the event that thread becomes wrapped around the cam, the bracket can be removed with ease.
Looper shaft thread tangling prevention mechanism
The end face of the looper cam and the looper thread bushing overlap so as to prevent looper thread from tangling in the looper shaft. The prevention mechanism also protects the oil seal from breakage.
Needle bar stroke conversion mechanism
The needle bar stroke can be increased by changing the position of the eccentric pin to smoothly sew heavyweight materials. The troublesome replacement of parts, which is conventionally associated with needlebar-stroke changing work, is no longer required. setting at the time of delivery: 31mm, (standard for sewing heavy-weight materials: 33mm )
The machine is applicable to an increased variety of sewing items
The machine comes with a differential-feed microadjustment mechanism and micro-lifter mechanism. With these mechanisms, the machine is able to sew almost all kinds of sewing products, such as foundations, light-weight underwear and heavyweight fleece, increasing the number of sewing items.
Comfortable working space
A longer distance from machine arm to needle helps reduce operator stress during the covering process. In addition, the cylinder, the length of which is ideally suited to the hemming process and offers good operability, helps create a comfortable working space. The machine has been developed to achieve low-noise and low-vibration operation to offer an operator-friendly work environment.
A C B
Sewing products are no longer stained with oil
A forced circulation mechanism has been introduced into the cylinder unit to prevent sewing products from being stained with oil. The mechanism is effective in eliminating oil stains.
A= mm B= mm C= mm
U10 (universal type)
The machine is a basic model, which can be used, in a broader range of sewing processes, such as the hemming and covering of T-shirts and polo shirts, and the sewing of fleece.
K10 (covering) This model is best suited to the covering process for polo shirts, trainers, sportswear, knit outers, etc.
T-shirt
Knitwear
Polo shirt
Sweat shirt
Covering guard (R) Part No.: 13438007 Covering guard ( L ) Part No.: 13438106
List of gauges Seams Model name Needle clamp Presser foot asm. Throat plate Main feed dog Differential-feed dog
1 Differential ratio can be switched by adjustment. 2 5mm (with top and bottom coverstitch), 8mm (with bottom coverstitch).
SPECIFICATIONS Model name Stitch type Max. sewing speed Stitch length Differential-feed ratio(switchable) Needle gauge Needle Lift of the presser foot Stitch pitch adjustment Differential feed adjustment Lubrication Lubricating oil Micro-lifter Needle bar stroke converting function Silicon oil tank for needle tip and needle thread Cartridge oil filter Weight of the machine head MF-7822 2-needle top and bottom coverstitch MF-7823 3-needle top and bottom coverstitch
6.500rpm 0.93.6mm (stitch length can be adjusted to 4.5mm) 1:0.91:1.8 (1:0.61:1.1) 4.8mm 5.6, 6.4mm
UY128GAS #9S#14S (standard #10S) 5mm (with top and bottom coverstitch), 8 (with bottom coverstitch) By dial By micro-adjustment mechanism Automatic JUKI Machine Oil 18 (equivalent to ISO VG18) Provided as standard Provided as standard Provided as standard Provided as standard 42kg
MF-7823U10B56
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
Stitch type 2-needle, top and bottom coverstitch 3-needle, top and bottom coverstitch Code 22 23 Application For universal For covering Code U10 K10 Tonque shape of throat plate B type (standard) Code B Needle gauge 4.8mm 5.6mm 6.4mm Code 48 56 64
For model category (23) (3-needle), needle gauge category 48 cannot be selected.
To order, please contact your nearest JUKI distributor.
INTERNATIONAL SALES H.Q.
8-2-1, KOKURYO-CHO, CHOFU-SHI, TOKYO 182-8655, JAPAN PHONE : (81) 3-3480-2357, 2358 FAX : (81) 3-3430-4909, 4914 http://www.juki.com
Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalog is printed on recycle paper.
