SD 14 e
SD 14 e
SD 14 e
SD14
Features
Simple, compact designed, this valves is only one section for open centre and closed centre hydraulic systems. H Fitted with a main pressure relief valve. H Diameter 20 mm -- 0.79 in interchangeable spools. H Available manual, pneumatic, electro--hydraulic and remote with flexible cable spool control kits.
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40C temperature.
Nominal flow rating Operating pressure (maximum) Back pressure (maximum) Internal leakage A(B)T Fluid Fluid temperature Viscosity with NBR (BUNA-N) seals with FPM (VITON) seals operating range min max Max level of contamination Ambient temperature NOTE -- For different conditions please contact Customer Service. on outlet port T Dp=100 bar - 1450 psi fluid and valve at 40C - 104F
120 l/min 250 bar 25 bar 3 cm3/min Mineral base oil from --20 to 80C from --20 to 100C from 15 to 75 mm2/s 12 mm2/s mm2/s 400 from 15 to 75 cSt 12 cSt 400 cSt 3600 psi 360 psi 0.18 in 3/min
Additional information This catalogue shows the product in the most usual configurations. Please contact Customer Service Dpt. for more detailled information or special request. WARNING! All specifications of this catalogue refers to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORRECT USE OF THE PRODUCT.
5th edition January 2000: This edition supercedes all prior documents.
DAC005E
SD14
Dimensional data
125 4.92 80 3.15 72.5 2.85 21.5 0.85 5.5 0.22
27.5 1.08
35 1.38
240 9.45
59 2.32
13 0.51
11 0.43
48 1.89
11 0.43
36 1.42
71 2.8
M10
24.5 0.96
38 1.5
35 1.38
27 1.06
104.5 4.11
Production batch : P99 = production year (1999) 00001 = progressive number Valve code
Standard threads
PORT Inlet P A and B ports Outlet T PILOT PORTS Pneumatic NPTF 1/8--27 NPTF 1/8--27 G 3/4 SAE 12 (1 1/16--12 UN)) BSP
(ISO228/1)
SAE UN-UNF
DAC005E
SD14
Hydraulic circuit
Standard valve is supplied with positive overlap spool (1CP).
AB
175 2500
Ex.: SD14/1(YG3--175)/1CP8L
Right inlet
A simmetrical body allows the reverse assembly of spool and relative control kit and lever (ED configuration).
BA
175 2500
DAC005E
SD14
Performance data Open centre
From inlet to outlet.
20 (bar)
A P B T
Pressure drop
15
10 90
A P B T
Pressure drop
15
10 90
A P B T
Pressure drop
15
10 90
SD14
Ordering codes Example: SD14 / 1 (YG3- 175) / 1CP 8 L * 1. 2. 3. 4. 5.
4.
8
1.
TYPE 1
Body kits *
CODE 5KC1603040 DESCRIPTION 1 section
6.
2.
9B-10B-11B
TYPE CODE DESCRIPTION VMD10/1 direct pressure relief valve type Y (YG2- 125) 3XCAR110212 Range 80 to 160 bar / 1150 to 2300 psi standard setting 125 bar / 1800 psi (YG3- 175) 3XCAR110213 Range 125 to 250 bar / 1800 to 3600 psi standard setting 175 bar / 2500 psi (YG4- 220) 3XCAR110214 Range 200 to 315 bar / 2900 to 4600 psi standard setting 220 bar / 3200 psi VMP10/1 pilot operated pressure relief valve type X (XG- 125) X006211120 Range 25 to 315 bar / 360 to 4600 psi standard setting 125 bar / 1800 psi Standard setting is referred to 10 l/min flow. SV XTAP526340 Relief valve blanking plug
11-15-16
1.
3.
TYPE 1CP 1N 2 3CP 4CP 6 7
Spool options
CODE 3CU1510140 3CU1510100 3CU1525600 3CU1531140 3CU1535140 3CU1550100 3CU1555100 CIRCUIT DESCRIPTION Double acting with positive overlap, 3 positions, A and B closed in neutral position Double acting, 3 positions, A and B closed in neutral position Double acting, 3 positions, with A open to tank in neutral position Single acting on A, 3 positions, B plugged requires G3/4 plug (see part I ) Single acting on B, 3 positions, A plugged requires G3/4 plug (see part I ) Double acting, 3 positions, closed center Double acting, 3 positions, closed center with A and B to tank in neutral position
8PF
2.
K
8EI3
SV
SD14
Ordering codes
II
4.
TYPE 8 9B 10B 11 11B 15 16 8PF 8EI3
5.
L
5.
SLP
TYPE L SLP TP TQ
3.
TP
6.
TYPE PSL
PSA
3XTAP732200
TQ
I
TYPE G3/4
Port plug *
CODE 3XTAP732200 DESCRIPTION Plug for single acting spool
II
Optional handlevers
CODE 170012020 DESCRIPTION Lenght L = 200mm / 7.87in
TYPE AL01/M10x200
SD14
Spools options
1
0
A B
0
A B
0
A
1CP
P T
P T
P T B port plugged
0
B
0
A B
0
A B
P T A port plugged
P T
P T
Operating features
Adjustment range : from 2 to 6.5 bar (29 to 94 psi) diagram 501A Max.pilot pressure : 10 bar (145 psi)
51 2.01
123 4.84
8
1 0 2
8PF
Proportional pneumatic kit
11 15 16
V1
V2
9B 10B 11B
V L Feeder kit (see catalogue SDS150 at page 13) 167 6.57
1 1 0 2
8EI3
ON/OFF electro--hydraulic kit
DAC005E
SD14
Special configurations Directional valve with rotary control kit
75 2.97 125 4.92 72.5 2.85 5.5 0.22
118 4.65
45 1.77
Standard body
-7 - 0.27
41 1.61
6.5 0.26
+7 +0.27
Stroke
Angle excursion 90
AB
175 2500
DAC005E
24.2 0.95
SD14
Special configurations Spool in regenerative 4th position
125 4.92 3 0.12 72.5 2.85 5.5 0.22
268 10.55
53 2.09
36 1.42
AB
27 1.06
104.5 4.11
175 2500
10
DAC005E
SD14
Installation and maintenance
The SD14 valve is assembled and tested as per the technical specification of this catalogue. Before the final installation on your equipment, follow the below recommendations: ---the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat surface; in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve; prior to painting, ensure plastic port plugs are tightly in place.
A B T
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and surface finish. The manufacturer shall be consulted.
DAC005E
11
WALVOIL S.P.A. 42100 REGGIO EMILIA ITALY VIA ADIGE, 13/D TEL. +39.0522.932411 FAX +39.0522.300984 E-MAIL: INFO@WALVOIL.COM HTTP: //WWW.WALVOIL.COM CUSTOMER SERVICE TEL. +39.0522.932555 FAX +39.0522.932455
D1409808I DAC005E