Scribd
Upload
151 views2 pages

Chromate-Free Coated Hot-Dip Galvanized Steel Sheet JC

1) JFE Steel Corporation developed a chromate-free coating called JC for hot-dip galvanized steel sheets that provides excellent corrosion resistance and weldability. 2) In salt spray tests, steel coated with JC showed no corrosion after 72 hours, which was equivalent to steel coated with conventional chromate coating. 3) JC coating maintains the same electrode life as chromate coating during spot welding but requires adjustment of welding current levels.

Uploaded by

aries26march
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
151 views2 pages

Chromate-Free Coated Hot-Dip Galvanized Steel Sheet JC

1) JFE Steel Corporation developed a chromate-free coating called JC for hot-dip galvanized steel sheets that provides excellent corrosion resistance and weldability. 2) In salt spray tests, steel coated with JC showed no corrosion after 72 hours, which was equivalent to steel coated with conventional chromate coating. 3) JC coating maintains the same electrode life as chromate coating during spot welding but requires adjustment of welding current levels.

Uploaded by

aries26march
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Chromate-free Coated Hot-dip Galvanized Steel Sheet = JC =

Optimum chromate-free coating for hot-dip zinc-coated steel sheets


http://www.jfe-steel.co.jp/en/products/sheets

Characteristics 1. Excellent corrosion resistance 2. Good spot weldability 3. Chromate-free coating No corrosion after 72 hrs. SST tested by a flat panel Same electrode life as conventional chromate coating * Environmentally-friendly chromate-free coated steel

Corrosion resistance (Salt spray test)


Chromate-free = JC = Chromate = C =

After 72 hrs. SST tested by a flat panel

After 48 hrs. SST at bent portion (3mmR bending)

Weldability (Suitable current range)


* Optimum current is different from conventional chromate coat. Current adjustment is required for JC coat.
Chromate-free JC

Chromate C

10

11

Welding current (kA)

Structure of coating Chromate-free coating with excellent corrosion resistance and superior weldability 1)
1) Surface resistance of JC is higher than that of conventional chromate coat. Please confirm the conductivity of JC.

Chromate-free coating

Hot dip galvanized layer <Base metal>Steel Sheet

Applications 1) Chassis for electrical appliances, etc. 2) Small parts for general applications

Cat.No.B3E-008-01 Available product size range of JC, commercial quality


3.5 3.0 Strip thickness (mm) 2.5 2.0 1.5 1.0 0.5 0.0 400
0.35x610 0.30x610 Range subject to negotiation 2.30x610 Available range for hot rolled substrate (SGHC equivalent)
(Hot rolled substrate is applied for 1.6mm or thicker)

3.20x610

Commercial quality

3.20x1220

2.30x1220

1.60x1250

Available range for cold rolled substrate (SGCC equivalent) 0.40x1000 0.30x1000 0.40x1250 0.35x1220

800 1000 1200 Strip width (mm) Remarks; More information is available on other quality.

600

1400

Steel grade

SG C C - JC JFE - C C - GZ - JC (A) (B) (C) (D) (E)

Z08 60/60
(F)

(A) Standards: SG=JIS hot dip zinc-coated steel sheets standard, JFE=JFE Standard (B) Base metal used: C=Cold rolled steel sheets, H=Hot rolled steel sheets (C) Classification:(JIS Standard) C=Commercial quality, D1=Drawing quality, class 1, D2=Drawing quality, class 2, D3=Drawing quality, class 3 (JFE Standard) B=Commercial quality, C=Forming quality, D=Drawing quality, E=Deep drawing quality (D) Zn coating: GZ=JFE GALVAZINC=JFE hot-dip zinc-coated steel sheets (E) Chromate-free chemical treatment : JC=Hot-dip zinc-coated steel sheet base (F) Zinc coating weight (Top side/Bottom side) Remarks on product use 1) 2) 3) Coated layer might be removed or discolored during degreasing or cleaning in some case. Please confirm it before use. In case of severe bending or deep drawing, there is possibility of whitening or peeling of coated layer. Please confirm it before use. High temperature heating like brazing causes the damage of coating. Please handle at room temperature.

Contact
TOKYO HEAD OFFICE Hibiya Kokusai Building, 2-3 Uchisaiwaicho 2-chome, Chiyodaku, Tokyo 100-0011, Japan Phone : (81) 3- 3597-3111 Fax : (81) 3-3597-4860

While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the readers risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information contained here. The information in this publication is subject to change or modification without notice. Please contact the JFE Steel office for the latest information. 0711R(0703) JTR

You might also like