Scribd
Upload
631 views2 pages

Quotation Request Form For BALL VALVES

This document is a quotation request form from AVCON Controls Pvt. Ltd. for ball valves. It requests information about the client, quantity, type of valve, body material, ball material, end connections, fluid properties, pressure, temperature, actuator type, accessories, and special instructions. The client is to fill in the relevant details to get a quotation for the ball valves that meet their process requirements.

Uploaded by

Sreekumar Nair
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
631 views2 pages

Quotation Request Form For BALL VALVES

This document is a quotation request form from AVCON Controls Pvt. Ltd. for ball valves. It requests information about the client, quantity, type of valve, body material, ball material, end connections, fluid properties, pressure, temperature, actuator type, accessories, and special instructions. The client is to fill in the relevant details to get a quotation for the ball valves that meet their process requirements.

Uploaded by

Sreekumar Nair
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Manufactured by :

AVCON CONTROLS PVT. LTD.


Plot No. : 65, Road No. 13, MIDC Marol, Andheri (E), Mumbai 400 093 Tel. No. : 2834 9134, 2834 9971/73, 2822 1505 Fax : 022-2821 6917/3298 E-mail : [email protected] Website : www.avconindia.com

QUOTATION REQUEST FORM FOR BALL VALVES


CLIENTS NAME : _________________________________

SHEET NO._______OF __________ DATE : / / 20

Please supply us the following information for successful offer-wherever necessary, please mark_ / in the box. Quantity required : Type : 2 Way 2 Piece 3 Piece 3 Way 2 Piece Ports : Full Ported Body Material : Cast Steel SS 304 SS 316 Other Ball Material : Stainless Steel 304 316 Body end connection : Screwed BSP NPT Flanged to ANSI 150 ANSI 300 Fluid passing through Valve : (name of the fluid) ________________________________ Flow : Incase of Steam kg/hr Incase of Gas Nm3/hr Incase of Liquid M3/hr. Pressure Min / Normal / Maxm. : / / Bar kg/cm2(g) Temp. Min / Normal / Maxm. c : / / Is fluid corrosive : Pl. specify ______________________ Leakage class : Bubble tight shut off Drop tight shut off Vacuum Sealed Pressure drop for sizing : On full shut off _____________ Kg / cm2 Actuator Pneumatic : Pneumatic Rotary Single Acting, Spring Return Double Acting For Single Acting : Normal pilot pressure requirement is 5.5 to 8.5 bar For Double Acting : Normal pilot pressure requirement is 5 to 8 bar if this pressure is not available, give details of pilot Air pressure available at your / customers end ________ bar. Valve Position of failure of Air Supply : Close Open Accessories Solenoid Valve : 3 Way for Spring Return Act. 4 Way for Double acting act Voltage : AC 220/240/110/24-50 Hz. DC 220/240/110/24 Enclosure : General Purpose Weatheproof 67 Flameproof IIB Flameproof IIC Limit Switches : 1-No 2 - Nos.(Cuttler Hammer make) Additional limit switches : 2-Nos Rotary limit switches box : RLS with Flameproof enclosure IIB Rotary Proximity Switches box : RPS with Flameproof enclosure IIB Remote Position Indicator with Limit Switches : Yes / No Pneumatic Valve Positioner : Yes / No Electronic Valve Positioner : Yes / No I to P converter : Yes / No Manual Operating arrangement : Yes / No Filter Regulator with gauge : Yes / No Air Lock Relay : Yes / No Do you have any special instructions for Pneumatic Operated Valve : _____________________________ Electric Actuator Please note in Electric Actuator, Spring Return, fail safe arrangement is not available and cannot be offered. Only Available : Motorised to Open Motorised to Close Voltage : Presently available only 230 Volts AC 50 Hz Enclosure : General Purpose Weatherproof 65 Type of Actuator : Tpye D E with 500 ohms potentiometer Additional Limit Switches reqd. : One Two Do you require Interfacing Unit, to be Connected with PID Controller type Of PID Controller output : 4 to 20 mA with 0 to 5 volts 0 to 10 volts 0 to 20 mA Remote Position Indicator : 0 to 5 Volts 0 to 10 Volts *Valve Characteristic : On-Off, Control Linear or control equal percentage (Please specify
One only)

You might also like