Scribd Logo
Upload

Welcome to Scribd!

  • 148 views

    WE-5-2 Fin Plate Connection

    Uploaded by

    Pedro Almeida
    This document summarizes the geometrical and mechanical properties of a fin plate connection between an IPE 300 beam and HEA 200 column. It provides details on the member properties, connection geometry, bolt properties, and weld details. It then calculates the shear resistance, tying resistance, and other limit states of the connection, finding the shear resistance to be 146.18 kN governed by bearing of the beam web, and the tying resistance to be 290.45 kN also governed by bearing of the beam web. The applied shear force of 100 kN is below the calculated shear resistance, indicating the design is adequate.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    WE-5-2 Fin Plate Connection

    Uploaded by

    Pedro Almeida
    148 views10 pages
    This document summarizes the geometrical and mechanical properties of a fin plate connection between an IPE 300 beam and HEA 200 column. It provides details on the member properties, connection geometry, bolt properties, and weld details. It then calculates the shear resistance, tying resistance, and other limit states of the connection, finding the shear resistance to be 146.18 kN governed by bearing of the beam web, and the tying resistance to be 290.45 kN also governed by bearing of the beam web. The applied shear force of 100 kN is below the calculated shear resistance, indicating the design is adequate.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the geometrical and mechanical properties of a fin plate connection between an IPE 300 beam and HEA 200 column. It provides details on the member properties, connection geometry, bolt properties, and weld details. It then calculates the shear resistance, tying resistance, and other limit states of the connection, finding the shear resistance to be 146.18 kN governed by bearing of the beam web, and the tying resistance to be 290.45 kN also governed by bearing of the beam web. The applied shear force of 100 kN is below the calculated shear resistance, indicating the design is adequate.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    148 views10 pages

    WE-5-2 Fin Plate Connection

    Uploaded by

    Pedro Almeida
    This document summarizes the geometrical and mechanical properties of a fin plate connection between an IPE 300 beam and HEA 200 column. It provides details on the member properties, connection geometry, bolt properties, and weld details. It then calculates the shear resistance, tying resistance, and other limit states of the connection, finding the shear resistance to be 146.18 kN governed by bearing of the beam web, and the tying resistance to be 290.45 kN also governed by bearing of the beam web. The applied shear force of 100 kN is below the calculated shear resistance, indicating the design is adequate.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    5.

    WORKED EXAMPLE Fin plate connection Geometrical and mechanical data

    5.2.1

    e
    M 20

    p p

    IPE 300 HEA 200


    Main joint data

    2b

    Configuration Column Beam Type of connection Fin plate

    Beam to column flange HEA 200 S 235 IPE 300 S 235 Fin plate connection 230 x 110 x 10, S 235

    Detailed characteristics
    Column HEA 200, S235

    Depth Thickness of the web Width Thickness of the flange Root radius Area Inertia Yield strength Ultimate strength
    Beam IPE 300, S235

    h tcw bf tcf r A I

    = 190,00 = 6,50 = 200,00 = 10,00 = 18,00 = 53,83 = 3692,16 235,00 360,00

    mm mm mm mm mm cm cm4 N/mm N/mm

    fyc = fuc =

    Depth Thickness of the web Width Thickness of the flange Root radius

    h tbw bf tbf r

    = = = = =

    300,00 7,10 150,00 10,70 15,00

    mm mm mm mm mm

    Area Inertia Yield strength Ultimate strength


    Fin plate 230 x 110 x 10, S 235

    A = 53,81 I = 8356,11 fyb = fub = 235,00 360,00

    cm cm4 N/mm N/mm

    Vertical gap gv Horizontal gap (end beam to column flange) Depth hp Width bp Thickness tp
    Direction of load transfer (1)

    = gh = = =

    35,00 = 230,00 110,00 10,00

    mm 10,00 mm mm mm mm

    Number of bolts rows Edge to first bolt row distance Beam edge to first bolt row distance Pitch between bolt row 1 and 2 Pitch between bolt row 2 and 3 last bolt row to edge distance
    Direction perpendicular to Load transfer (2)

    n1 = 3 e11 = 45,00 e1b = 80,00 p1[1] = 70,00 p1[2] = 70,00 e1n = 45,00

    mm mm mm mm mm

    Number of bolts rows Edge to first bolt row distance last bolt row to beam edge distance Lever arm Yield strength Ultimate strength
    Bolts M20, 8,8

    n2 e21 e2b z

    = = = =

    1 50,00 50,00 60,00 235,00 360,00

    mm mm mm N/mm N/mm

    fyp = fup =

    Resistant area Diameter of the shank Diameter of the holes Yield strength Ultimate strength

    As d d0 fyb fub

    = = = = =

    245,00 20,00 22,00 640,00 800,00

    mm mm mm N/mm N/mm

    Welds

    Throat thickness of the weld Length of the weld


    Safety factors

    aw = lw =

    5,00 230,00

    mm mm

    M0 = M2 =

    1,00 1,25

    Applied shear force

    VSd = 100 kN

    5.2.2

    Requirements to ensure sufficient rotation capacity

    (1)

    hp db

    hp db

    = = =

    230,00 mm h 2 tbf 2 r 300,00 2 10,70 2 15,00 = 248,60 mm ok we suppose that this requirement is fulfilled,

    (2)

    available > required

    5.2.3

    Requirements to avoid premature weld failure

    a > 0,4 tp w tp fyp fup w

    f yp M 2 = 4,52 mm f up M 0 = 10,00 mm = 235,00 N/mm = 360,00 N/mm = 0,80 ok

    a = 5,00 mm

    5.2.4

    Joint shear resistance

    Bolts in shear

    VRd 1 =

    n Fv,Rd 6z 1 + (n + 1) p 1
    2

    = 173,28 kN

    =3

    z = 60,00 mm Fv,Rd = v A fub / M2 = 94,08 kN v = 0,6 A = As = 245,00 mm fub = 800,00 N/mm


    Fin plate in bearing

    VRd 2 =

    1 1 + n Fb , ver ,Rd + F b ,hor ,Rd


    2

    = 192,59 kN
    2

    n =3 =0 1/n =1/3 6z = = 0,43 p1 n (n + 1)


    Fb,Rd,ver = k1 b d tp fup / M2 = 98,18 kN b = min (1 , 2 , 3 , 1) = 0,68 1 = e1 / 3d0 = 0,68 2 = p1 / 3d0 1/4 = 0,81 3 = fub / fup = 2,22 k1 = min (2,8 e2 / d0 1,7 ; 2,5) = min (4,66 ; 2,5) = 2,5

    Fb,Rd,hor = k1 b d tp fup / M2 = 109,09 kN b = min (1 , 2 , 1) = 0,75 1 2 k1 d tp fub fup = e2 / 3d0 = 0,75 = fub / fup = 2,22 = min (2,8 e1 / d0 1,7 ; 1,4 p1 / d0 1,7 ; 2,5) = min (4,03 ; 2,75 ; 2,5) = 2,5 = 20,00 mm = 10,00 mm = 800,00 N/mm = 360,00 N/mm

    Gross section of the fin plate in shear

    VRd 3 = Av fyp / (1,27

    3 M0) = 245,72 kN

    Av = hp tp = 23,00 cm fyp = 235,00 N/mm


    Net section of the fin plate in shear

    VRd 4 = Av,net fup / ( 3 M2 ) = 272,69 kN Av,net = ( hp n1 d0 ) tp = 16,40 cm hp = 230,00 mm n1 = 3 d0 = 22,00 mm tp = 10,00 mm fup = 360,00 N/mm
    Shear block of the fin plate

    VRd 5 = Feff,2,Rd = 232,54 kN Feff,2,Rd = 0,5 fup Ant / M2 + fyp Anv / ( 3 M0 ) = 232,54 kN Ant = tp ( e2 - d0/2 ) = 390,00 mm tp = 10,00 mm e2 = 50,00 mm d0 = 22,00 mm = tp ( hp e1 ( n1 0,5 ) d0 ) = 1300,00 mm n1 = 3 hp = 230,00 mm e1 = 45,00 mm = 235,00 N/mm = 360,00 N/mm

    Anv

    fyp fup
    Fin plate in bending

    hp = 230 mm 2,73 z = 163,8 mm VRd 6 =


    Buckling of the fin plate

    VRd 7 =

    Wel z

    M0

    = 776,97 kN

    Wel =

    tp h2 p 6

    = 88 166,67 mm

    tp = 81 z
    Beam web in bearing

    235 = 528,75 N/mm

    VRd 8 =

    1 1 + n Fb , ver ,Rd + F b ,hor ,Rd


    2

    = 146,19 kN
    2

    n =3 =0 1/n =1/3 6z = = 0,43 p1 n (n + 1) Fb,Rd,ver = k1 b d tbw fubw / M2 = 82,88 kN b = min (1 , 2 , 1) = 0,81 1 = p1 / 3d0 1/4 = 0,81 3 = fub / fubw = 2,22 = min (2,8 e2b / d0 1,7 ; 2,5) = min (4,66 ; 2,5) = 2,5 Fb,Rd,hor = k1 b d tbw fubw / M2 = 77,45 kN b = min (1 , 2 , 1) = 0,75 1 = e2b / 3d0 = 0,75 2 = fub / fubw = 2,22 k1 d tbw fub fubw = min (1,4 p1 / d0 1,7 ; 2,5) = min (2,75 ; 2,5) = 2,5 = 20,00 mm = 7,10 mm = 800,00 N/mm = 360,00 N/mm k1

    Gross section of the beam web in shear

    VRd 9 = Ab,v fybw / ( 3 M0) = 348,42 kN Ab,v = 25,68 cm fybw = 235,00 N/mm
    Net section of the beam web in shear

    VRd10 = Av,net fubw / ( 3 M2 ) = 349,11 kN Ab,v,net = Ab,v n1 d0 tbw = 21,00 cm Ab,v = 25,68 cm n1 = 3 d0 = 22,00 mm tbw = 7,10 mm fubw = 360,00 N/mm
    Shear block of the beam web

    VRd11 = Feff,2,Rd = 198,82 kN Feff,2,Rd = 0,5 fubw Ant / M2 + fybw Anv / ( 3 M0 ) = 198,82 kN Ant = tbw ( e2b - d0/2 ) = 276,9 mm tbw = 7,10 mm e2b = 50,00 mm d0 = 22,00 mm Anv = tbw ( e1b + (n1 1 ) p1 (n1 0,5) d0 )= 1171,50 mm n1 = 3 p1 = 70,00 mm e1b = 45,00 + 35,00 = 80,00 mm fybw = 235,00 N/mm fubw = 360,00 N/mm

    Joint shear resistance

    Shear resistance of the joint VRd = 146,18 kN Failure Mode: Beam web in bearing

    5.2.5

    Requirements to ensure the safety of the shear design rules

    (1)

    VRd < min( VRd 1 ; VRd 7 ) VRd = 146,18 kN min( VRd 1 ; VRd 7 ) = 178,28 kN VRd 1 = 178,28 kN VRd 7 = 776,97 kN ok,

    (2)

    n2 = 1 :

    Fb,hor,Rd min ( Fv,Rd ; VRd 7 )

    VRd 7 = 776,97 kN Fv,Rd = 94,08 kN


    for the beam web : Fb,hor,Rd = 77,45 kN = 0,43 min ( Fv,Rd ; VRd 7 ) = min ( 94,08 ; 334,09 ) = 94,08 kN ok,

    One of the two inequalities is satisfied, ok, (3) VRd = VRd 8 ok,

    5.2.6

    Design check

    Applied shear force: Shear resistance:

    VSd VRd

    = 100 kN = 146,18 kN

    Design O,K,

    5.2.7

    Joint tying resistance

    Bolts in shear

    Nu 1 = n Fv,u = 352,80 kN
    n=3

    Fv ,u = v f ub A = 117,60 kN
    A = As = 245,00 mm v = 0,6

    Fin plate in bearing

    Nu 2 = n Fb,u, hor = 409,09 kN n=3 Fb ,u ,hor = k 1 b f up d t p = 136,36 kN


    b

    = min (1 , 2 , 1) = 0,75
    1 2

    = e2 / 3d0 = 0,75 = fub / fup = 2,22 = min (2,8 e1 / d0 1,7 ; 1,4 p1 / d0 1,7 ; 2,5) = min (4,03 ; 2,75 ; 2,5) = 2,5

    k1

    d tp fub fup

    = 20,00 mm = 10,00 mm = 800,00 N/mm = 360,00 N/mm

    Fin plate in tension : gross section

    Nu 3 = tp hp f up = 828,00 kN

    Fin plate in tension : net section

    Nu 4 = 0,9 Anet,p f up = 531,36 kN

    Anet,p = tp hp d0 n1 tp = 1640,00 mm n1 = 3 hp = 230,00 mm tp = 10,00 mm d0 = 22,00 mm


    Beam web in bearing

    Nu 5 = n Fb,u, hor = 290,45 kN n=3 Fb ,u ,hor = k 1 b f ubw d t bw = 96,82 kN


    b

    = min (1 , 2 , 1) = 0,75 1 = e2b / 3d0 = 0,75 2 = fub / fubw = 2,22 = min (1,4 p1 / d0 1,7 ; 2,5) = min (2,75 ; 2,5) = 2,5 = 20,00 mm = 7,10 mm = 800,00 N/mm = 360,00 N/mm

    k1 d tbw fub fubw

    Beam web in tension : gross section

    Nu 6 = tbw hbw f ubw = 587,88 kN


    Beam web in tension : net section

    Nu 7 = 0,9 Anet,bw f ubw = 377,27 kN

    Anet,bw = tbw hbw d0 n1 tbw = 1164,40 mm tbw = 7,10 mm hbw = 230,00 mm n1 = 3 d0 = 22,00 mm
    Supporting member in bending

    ,
    Welds

    Conditions for full-strength behaviour of the welds are fulfilled


    Joint tying resistance

    Tying resistance of the joint Nu = 290,45 kN Failure mode : Beam web in bearing Based on paper Jaspart J.P., Renkin S., Guillaume M.L.: European Recommendations for the Design of Simple Joints in Steel Structures, 1st draft of a forthcoming publication of the Technical Committee 10 Joints and Connections of the European Convention of Constructional Steelwork (ECCS TC10) prepared at the University of Lige, September 2003.

    You might also like