Classif Aços

BASE MATERIALS
As base material for roll-bonded clad plates
request, voestalpine Grobblech will offer support

and advice in the selection. voestalpine
Grobblech has developed special base materials
for roll-bonded clad plates with cladding materials
requiring special heat treatments for the purpose
of corrosion resistance. A brief summary of the
applicable base materials according to European
standards EN and ASTM can be found on pages
14/15 and 16.
structural steels
fine-grain structural steels
pressure vessel steels
line pipe steels
shipbuilding steels
are used in accordance with the respective

applicable standards or customer specifications.
The material is selected by the customer in view
of the strength and toughness requirements
under specific operating conditions. Upon
The indicated chemical and mechanical key data

refer to the smallest thickness group.
STRUCTURAL STEELS AND PRESSURE VESSEL STEELS

according to EN 10025-2 and EN 10028-2.
Mechanical
Chemical composition (heat analysis) %
properties
Stan-
Steel grade
dard
Abbreviation
Yield
Tensile
P
C
Si
Mn
strength
Cr
max.
Ni
strength
Mo
max.
N/mm 2
N/mm 2
min.
S235JR
0.17
1.40
0.025
0.025
235
360-510
S355JR
0.24
0.55
1.60
0.035
0.035
355
470-630
P235GH
0.16
0.35
0.025
0.015
0.30
0.30
0.08
235
360480
0.025
0.015
0.30
0.30
0.08
265
410530
0.025
0.015
0.30
0.30
0.08
295
460580
0.025
0.015
0.30
0.30
0.08
355
510650
0.025
0.010
0.30
0.30
0.25
275
440590
470
590-750
300
450600
310
480630
355
540-690
EN
10025-2
0.60
1.20
P265GH
0.20
0.40
0.80
1.40
P295GH
0.08
0.40
0.20
P355GH
0.10
1.50
0.60
0.22
EN
16Mo3
10028-2
0.12
0.15
0.35
0.08
0.40
0.08
0.35
0.10
0.15
14
0.020
0.010
0.40
0.025
0.010
1.00
0.50
0.14
12CrMo9-10
1.00
0.35
0.20
1.50
0.18
10CrMo9-10
0.,40
0.90
0.23
13CrMo4-5
1.10
1.70
0.20
20MnMoNi4-5
0.90
0.40
0.30
0.80
0.45
0.80
0.60
0.40
1.15
0.020
0.010
0.80
0.30
0.70
0.40
2.00
0.60
2.50
0.010
0.010
2.00
2.50
0.90
1.10
0.30
0.90
1.10
STRUCTURAL STEELS AND PRESSURE VESSEL STEELS

according to ASTM
Mechanical
Chemical composition (heat analysis) % (Extract)

Standard
Grade Class
A36
Si
Mn
max. 0.25 max. 0.40
properties
Cr
Ni
Mo
Rp0,2
Rm
MPa
MPa
max.
max.
0.04
0.05
250
400
ASTM
ASTM
ASTM
A283
max. 0.24 max. 0.40
0.90
0.035
0.04
205
380-515
A285
max. 0.28
0.90
0.035
0.035
205
380-515
A516
60
max. 0.21 0.15-0.40
0.60-0.90
0.035
0.035
220
415-550
A516
65
max. 0.24 0.15-0.40
0.85-1.20
0.035
0.035
240
450-585
A516
70
max. 0.27 0.15-0.40
0.85-1.20
0.035
0.035
260
485-620
A537
max. 0.24 0.15-0.50
0.70-1.35
0.035
0.035
max. 0.25 max. 0.25 max. 0.08
345
min. 485
A537
max. 0.24 0.15-0.50
0.70-1.35
0.035
0.035
max. 0.25 max. 0.25 max. 0.08
415
min. 550
A533
max. 0.25 0.15-0.40
1.15-1.50
0.035
0.035
0.40-0.70 0.45-0.60
345
550-690
A533
max. 0.25 0.15-0.40
1.15-1.50
0.035
0.035
0.40-0.70 0.45-0.60
485
620-795
A517
0.12-0.21 0.45-0.70
0.20-0.35
0.035
0.035
0.85-1.20 1.20-1.50 0.45-0.60
690
795-930
A204
max. 0.18 0.15-0.40
0.90
0.035
0.035
0.45-0.60
255
450-585
A204
max. 0.20 0.15-0.40
0.90
0.035
0.035
0.45-0.60
275
485-620
A302
max. 0.20 0.15-0.40
1.15-1.50
0.035
0.035
0.45-0.60
345
550-690
A387
11
0.05-0.17 0.50-0.80
0.40-0.66
0.035
0.035
1.00-1.50
0.40-0.65
245
415-585
A387
11
0.05-0.17 0.50-0.80
0.40-0.65
0.035
0.035
1.00-1.50
0.40-0.65
275
450-585
A387
12
0.05-0.17 0.15-0.40
0.40-0.65
0.035
0.035
0.80-1.15
0.40-0.60
230
380-550
A387
12
0.05-0.17 0.15-0.40
0.40-0.65
0.035
0.035
0.80-1.15
0.40-0.60
275
450-585
A387
22
0.05-0.15 max. 0.50
0.30-0.60
0.035
0.035
2.00-2.50
0.90-1.10
210
415-585
A387
22
0.05-0.15 max. 0.50
0.30-0.60
0.035
0.035
2.00-2.50
0.90-1.10
310
515-690
15
FINE-GRAIN STRUCTURAL STEELS

according to EN 10028-3 and 10028-6
Stan-
Steel grade
dard
Abbreviation
Chemical composition (heat analysis) %
Mechanical
(Extract)
properties
Yield
Tensile
Si
Cr
Ni
Mo
strength
max.
max.
max.
max.
max.
N/mm
strength
Mn
max.
max.
N/mm 2
min.
P 275 N
P 275 NH
0.16
0.40
0.80-1.50
0.025
0.015
0.30
0.50
0.08
275
390510
0.16
0.40
0.80-1.50
0.020
0.010
0.30
0.50
0.08
275
390-510
0.18
0.50
1.10-1.70
0.025
0.015
0.30
0.50
0.08
355
490-630
0.18
0.50
1.10-1.70
0.020
0.010
0.30
0.50
0.08
355
490-630
0.20
0.60
1.10-1.70
0.025
0.015
0.30
0.80
0.10
460
570-720
0.20
0.60
1.10-1.70
0.020
0.010
0.30
0.80
0.10
460
570-720
0.16
0.40
1.50
0.025
0.015
0.30
0.50
0.25
355
490-630
0.16
0.40
1.50
0.020
0.010
0.30
0.50
0.25
355
490-630
0.18
0.50
1.70
0.025
0.015
0.50
1.00
0.50
460
550-720
0.18
0.50
1.70
0.020
0.010
0.50
1.00
0.50
460
550-720
0.18
0.60
1.70
0.025
0.015
1.00
1.50
0.70
500
770-590
0.18
0.60
1.70
0.020
0.010
1.00
1.50
0.70
500
770-590
0.20
0.80
1.70
0.025
0.015
1.50
2.50
0.70
690
770-940
0.20
0.80
1.70
0.020
0.010
1.50
2.50
0.70
690
770-940
P 275 NL1
P 275 NL2
P 355 N
EN
10028-3
P 355 NH
P 355 NL
P 355 NL2
P 460 N
P460 NH
P 460 NL1
P 460 NL2
P 355 Q
P 355 QH
P 355 QL1
P 355 QL2
P 460 Q
P 460 QH
P 460 QL1
P 460 QL2
EN
10028-6
P 500 Q
P 500 QH
P 500 QL1
P 500 QL2
P 690 Q
P 690 QH
P 690 QL1
P 690 QL2
16
Heavy Plate
Subsidiary of LNM Holdings N.V.
STANDARDS AND GRADES

Steel for construction, structural general purposes
Standard
STAS 500/2-80
S.R.E.N 10025+A 1/94
ASTM A 283/97
ASTM A 285/96
API 5L/2000
JISG 3101/87
STAS 500/2-80
STAS 2883/3-91
S.R.E.N 10025+A 1/94
EN 10028/2-92
DIN 17100/80
DIN 17155/83
ASTM A36
ASTM A 283/97
ASTM A 285/96
ASTM A 515/97
BS 4360/86
BS 1501/80
JISG 3101/87
JISG 3106/92
STAS 500/2-80
STAS 2883/2-91
ASTM A 283/97
ASTM A 515/97
API 5L/2000
ASTM A573/93
IS 2062/92
IS 2002/92
JISG 3101/87
JISG 3106/92
STAS 500/2-80
STAS 2883/2-91
STAS 9021/1-89
S.R.E.N 10025+A 1/94
EN 10028/2-92
EN 10028/3-92
EN 10113/2-93
DIN 17100/80
DIN 17155/83
DIN 17102/83
DIN 17155/83
ASTM A 573/93
ASTM A 633/95
ASTM A 516/96
API 5L/2000
BS 4360/86
BS 1501/80
IS 2062/92
Grade
OL 32; OL 34
S 185
Gr.A, B
Gr.A, B
Gr.A
SS 330
OL 37
R 360
S 235
P 235 GH
RSt 37
HI
A36
Gr.C
Gr.C
Gr.55
40 A, B, C; 40 D, DDI
Gr.161-360B
SS 400
SM 400-A, B
OL 42
K 410
Gr.D
Gr.60, 65
Gr.B
Gr.58
Fe 410 WA, Fe 410 WB
Gr.2
SS 400
SM 400-A, B
OL 44
K 460
OCS 285
S 275
P 265 GH, P 295 GH
P 275 N, NH
S 275 N
RSt 44
H II
St E285
17 Mo 4
Gr.65
Gr.A
Gr.55, 60, 65
X 42, X 46
43 A, B, C, D
Gr.161-430 B
Fe 410 WC
Application
Structural elements for agricultural machine, stands,

machine parts, armatures, cupped parts and pipes.
Welded or joined structures as bridge elements, tanks,

pillars, support elements for machines and equipments
and flanges for moderate tensions.
Mechanisms for moderate stress and easy stressed

metallic beams.
Structural elements for metallic welded constructions

working in relatively high mechanical stress and enough
resistance at fragile breaking.
Heavy Plate
continued
STANDARDS AND GRADES

Steel for construction, structural general purposes continued
Standard
STAS 500/2-80
STAS 2883/2-91
STAS 2883/3-91
STAS 9021/1-89
EN 10025/93
EN 10028/2- 92
EN 10028/3-92
DIN 17100/80
DIN 17102/83
DIN 17155/83
ASTM A 529/96
ASTM A 737/97
ASTM A 537/95
BS 4360/86
JIS G3101/87
JIS G3106/92
STAS 880/88
DIN 17200/69
Grade
OL 52
K 510
R 510
OCS 355
S 355
P 355 GH
P 355 N, NH
RRSt 52
St E 355
19 Mo 6
Gr.50
Gr.B
Cls. 1, 2
50 A, B, C, D
SS 490
SM 490-A, B
OLC 10, 15, 20, 25,
30, 35, 40, 45
C 22, 35, 45
Application
Structural elements for metallic constructions

highly stressed, pillars for electric lines, cranes
and big capacity tanks.
Weldable steel with fine-grained structure; steel for boilers,

container and welded pipesspecial steel; microalloyed steel;
steel resisting at atmosphere corrosion.
Standard
STAS 2883/3-88
EN 10028/2-92
DIN 17155/83
STAS 2883/3-88
EN 10028/2-92
DIN 17155/83
STAS 2883/3-88
EN 10028/2-92
DIN 17155/83
STAS 9020/1-89
STAS 2883/2-91
EN 10028/3-92
ASTM A 515/97
ASTM A 516/97
EN 10113/2-93
DIN 17102/83
ASTM A 633/95
ASTM A 656/97
ASTM A 517/99
EN 10028/3-92
EN 10113/2-93
DIN 17102/83
ASTM A709/99
ASTM A588/99
ASTM 572/97
ASTM 737/97
API 5L/2000
STAS 500/3-80
EN 10155/
ASTM 242/97
Grade
16 Mo3, 16 Mo 5
16 Mo 3
15 Mo 3
14 Mo Cr 10, 14 Mo Cr 4
13 Cr Mo 4-5
13 Cr Mo 4-4
12 Mo Cr 22,
12 Mo Cr 50
10 Cr Mo 9-10,
11 Mo Cr 90
10 Cr Mo 90
OCS 355-6, 7
R 510-7
P 355 NL1, NL2
Gr.70
Gr.70
P 355 NL
T(E)StE 355,
W(T,E)St 380
Gr.C
Gr.50, 60
Gr.F
P 460 N, NH, NL 1, NL 2
S 420 N.NL; S 460 N, NL
W(T, E)ST 420, W(T, E) ST
460
Gr.50 W
Gr.B
Gr.50, 60, 65
Gr.C
X 52, X 56, X 60, X 65
RCA 37; RCB 52
S 235 JOW; S 355 JOW
Tip 1
Application
For boilers, vessels working under pressure at ambient

and high temperature.
Structural elements for welded, riveted, or bolted

construction of bridges, buildings, pressure vessels,
piping components.
Structural
elements for welded
construction,
Steel for longitudinally
pipes.where savings in
weight and added durability are important, with
resistance at atmospheric corrosion.
Heavy Plate
continued
Steel for shipbuilding

Shipping Register
GL
LRS
A
A
B
B
D
D
E
E
A 32
AH 32
D 32
DH 32
E 32
EH 32
A 36
AH 36
D 36
DH 36
E 36
EH 36
DNV
NVA
NVB
NVD
NVE
NVA 32
NVD 32
NVE 32
NVA 36
NVD 36
NVE 36
ABS
A
B
D
E
A 32
D 32
E 32
A 36
D 36
E 36
Lloyds Register of Shipping

Plates for boiler and pressure vessel
Grade
360 AR, 410 AR
360 FG, 410 FG, 460 FG, 490 FG, 510 FG
LRS
Steel for structural elements for

construction, for boilers and pressure
vessels with TV-Germany authorization
Standard
DIN 17155
EN 10028/2
DIN 17155
EN 10028/2
DIN 17100
EN 10025
DIN 17100
EN 10025
DIN 17100
EN 10025
STAS 2883/2-91
Grade
H II
P 265 GH
13 Cr Mo 4-4
13 Cr M0 4-5
RSt 37-2, St 37-2, St 44-2, St 44-3, St 52-3
S 235 JRG 2, S 235 J 2 G 3, S 275 JR,
S 275 J 2 G 3, S 355 J 2 G 3
RSt 37-2, St 37-2
S 235 JRG 2, S 235 J 2 G 3
St 44-2, St 44-3, St 52-3
S 275 JR, S 275 J 2 G 3, S 355 J 2 G 3
R 510-4a
Sizes
Thickness (mm)
68
>8 11
>11 12
>12 40
>40 60
>60 80
>80 100
Width (mm)
1,500 3,000 *
1,500 3,200
1,500 3,600
1,500 4,000
1,500 4,000
1,500 3,500
1,500 3,500
Length (m)
6; 8; 10; 12
6; 8; 10
4; 6; 8
46
Note: * Other widths are subject to mill approval

Other dimensions are limited due to max.10 tons/plate
BV
A
B
D
E
A 32
D 32
E 32
A 36
D 36
E 36
RINA
A
B
D
E
AH 32
DH 32
EH 32
AH 36
DH 36
EH 36
NKK
KA
KB
KD
KE
KA 32
KD 32
KE 32
KA 36
KD 36
KE 36
RNR
A
B
D
E
A 32
D 32
E 32
A 36
D 36
E 36
ASTM A131
A
B
D
E
AH 32
DH 32
EH 32
AH 36
DH 36
EH 36
Heavy Plate
continued
Technical Delivery Conditions
Margins: as rolled or cut to length.
Chemical properties on ladle analysis or as per ordered standard.
Mechanical properties according to ordered standards.
Dimensional tolerances according to DIN 1543/81; ASTM A 6-88 C;

BS 4360/86; ASTM A 20-85; GOST 19903-74; STAS 437/81;
EN 10029/91; JIS G 3193/77. For shipbuilding plates, tolerances for
thickness as per shipping register agreed upon in the contract.
Flatness tolerances according to DIN 1543/81 table 5 up to

50 mm thickness (including) and max. 12 mm/1 m for thicker
plates; according to ASTM A 6-88C; according to ASTM A 20-85;
according to GOST 19903/74; according to EN 10029/91 table 4
class N; according to STAS 437/81; according to BS 4360/86; and
according to quality standards when stipulating flatness deviations.
Marking
Die stamped: heat number and number of programme, or according

to register of reception.
By painting: suppliers emblem, made in Romania, size, quality,

standards, number of contract and number of lot.
Documents of Quality
Mills quality certificate according to:

DIN 50049/2.1; 2.2
EN 10204/2.1; 2.2.
DIN 50049/3.1.B
EN 10204/3.1.B
DIN 50049/3.1.C; 3.2.C
EN 10204/3.1.C; 3.2.C
The quality certificates can also be signed and stamped by the
shipping registers representatives.
TV reception according to approval. These certificates are drawn up

by lots (assortments) for the shipped quantities on each wagon and
dispatched to the port of loading.
General note: The above product ranges are indicative, the exact sizes
and technical parameters are to be mutually discussed and agreed when
finalizing orders.
Marketing Enquiries:
Tel: +40 36 407633
+40 36 407634
Fax: +40 36 407635
e-mail: [email protected]

Classif Aços

Uploaded by

Copyright:

Available Formats

Classif Aços

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Classif Aços

Uploaded by

Copyright:

Available Formats

BASE MATERIALS

As base material for roll-bonded clad plates

request, voestalpine Grobblech will offer support

are used in accordance with the respective

The indicated chemical and mechanical key data

STRUCTURAL STEELS AND PRESSURE VESSEL STEELS

STRUCTURAL STEELS AND PRESSURE VESSEL STEELS

Chemical composition (heat analysis) % (Extract)

max. 0.25 max. 0.40

max. 0.24 max. 0.40

max. 0.21 0.15-0.40

max. 0.24 0.15-0.40

max. 0.27 0.15-0.40

max. 0.24 0.15-0.50

max. 0.25 max. 0.25 max. 0.08

max. 0.24 0.15-0.50

max. 0.25 max. 0.25 max. 0.08

max. 0.25 0.15-0.40

max. 0.25 0.15-0.40

0.85-1.20 1.20-1.50 0.45-0.60

max. 0.18 0.15-0.40

max. 0.20 0.15-0.40

max. 0.20 0.15-0.40

0.05-0.15 max. 0.50

0.05-0.15 max. 0.50

FINE-GRAIN STRUCTURAL STEELS

Chemical composition (heat analysis) %

Subsidiary of LNM Holdings N.V.

STANDARDS AND GRADES

Structural elements for agricultural machine, stands,

Welded or joined structures as bridge elements, tanks,

Mechanisms for moderate stress and easy stressed

Structural elements for metallic welded constructions

Subsidiary of LNM Holdings N.V.

STANDARDS AND GRADES

Structural elements for metallic constructions

Weldable steel with fine-grained structure; steel for boilers,

For boilers, vessels working under pressure at ambient

Structural elements for welded, riveted, or bolted

Subsidiary of LNM Holdings N.V.

Steel for shipbuilding

Lloyds Register of Shipping

Steel for structural elements for

Note: * Other widths are subject to mill approval

Subsidiary of LNM Holdings N.V.

Technical Delivery Conditions

Margins: as rolled or cut to length.

Chemical properties on ladle analysis or as per ordered standard.

Mechanical properties according to ordered standards.

Dimensional tolerances according to DIN 1543/81; ASTM A 6-88 C;

Flatness tolerances according to DIN 1543/81 table 5 up to

Die stamped: heat number and number of programme, or according

By painting: suppliers emblem, made in Romania, size, quality,

Mills quality certificate according to:

TV reception according to approval. These certificates are drawn up

You might also like