M.tech Brochure 09
M.tech Brochure 09
M.tech Brochure 09
To mould fresh electronics engineers and to upgrade working engineers into High Caliber
Embedded System Designers by enhancing their knowledge and skills in various hardware
and software design aspects of Embedded Systems. This course offers a range of topics of
immediate relevance to industry and makes the students exactly suitable for industries
engaged in Embedded System development. This course is also an excellent preparation
for those wishing to engage in application research in this rapidly developing area.
1/7
UNIVERSITY AFFILIATION
This M.Tech course is affiliated to Calicut University.
AICTE APPROVAL
This M.Tech course is approved by AICTE for the year 2009-10.
DISTRIBUTION OF SEATS
18 seats are available for this M.Tech. Three seats are reserved for SC/ST and one
seat from the general quota shall be reserved for Physically handicapped students.
Reservations shall be as per existing government rules.
General & Physically handicapped (1 seat) 10 SC/ST 3 Sponsored 5
ELIGIBILITY
1 a. The candidate should have studied the graduate course in an institution
approved by the All India Council for Technical Education.
e. GATE Candidates who have appeared for the final examination may also
apply provided the results are made available on or before 31.10.09. Such
candidates may be considered for provisional admission. However, these
candidates must have successfully passed at least six semesters of B.Tech.
(Engg.) or three years of Engineering studies on the date of application and
the application must include attested copies of the mark lists. On the date of
counselling/admission, the students under Semester system must have passed
all including the Seventh Semester Examination also and he/she shall
produce the original Mark lists up to the Seventh Semester Examination,
while the candidates under Year system must have passed all including the
third year of engineering and he/she shall produce the Original Mark Lists up
to the Third Year of Engineering.
SPONSORED SEATS
A sponsored candidate must have been in service of the sponsoring organization for
at least two years at the time of applying. Their employers must sponsor them and
2/7
relieve them to pursue the programme for the full duration of the course. Candidates
from Central/State Govt. Institutions, Public Sector Organizations and reputed
Private Organizations will be considered in this category. Teachers sponsored from
AICTE recognized Engineering Colleges and Polytechnics will also be considered in
this category.
SELECTION OF CANDIDATES
Selection of candidates who have qualified in GATE will be based on their GATE
Score subject to eligibility and availability of seats. The admission to the course shall
be based on the following criteria:
FEES
Fees shall be Rs 45,000/- towards tuition fees per semester and
approximately Rs 7,000/- per year towards University affiliation. Refundable caution
deposit is Rs 5,000/-. Examination and other university fees shall be extra.
Sem1 57,000/- Sem2 45,000/- Sem3 52,000/- Sem4 45,000/-
RECOGNITION CERTIFICATE
For candidates with qualifying degree from Universities and Deemed universities
outside Kerala, Equivalence certificate from the Calicut University is required for
admission. Only those candidates who are offered admission need to produce the
equivalence certificate. It has to be produced within a day of the admission (on or
before 16th of July) failing which the admission is lost. Those candidates desirous of
knowing whether their university is recognized may check with the university with
the following details.
3/7
1. Degree Name
2. Branch of Degree
3. Name and address of the University
4. Name and address of the College
5. Year of passing
The fee for Equivalence certificate is Rs 250/- and for recognition, Rs 50/- which has
to be paid by chalan or by DD payable in favour of ‘Finance Officer, University of
Calicut’ payable at SBT, Tenhipalam.
MIGRATION CERTIFCATE
All students admitted for the course from Universities other than Calicut University
have to produce the migration certificate after joining the course.
SCHOLARSHIP
All GATE qualified candidates are eligible for teaching assistantship (TA) subject to
AICTE and MHRDE guidelines. This facility will not be available to sponsored
Candidates, Foreign Nationals and Dependants of NRIs. Disbursement of TA will
only be done after the Govt. of India makes funds available. As per MHRD
directives fellow holding TA ship shall not accept or hold any appointment paid or
otherwise or receive any emoluments, salary, stipend etc from any source during the
tenure of the award.
The students joining the programme under this category will be considered for
Teaching Assistantships of Rs. 8,000/- per month, based on the following norms:
(a) Students getting assistantship will be required to assist / work for courses,
laboratory, or any other related academic / administrative work to the extent of 8
hours per week.
(b) The assistantship will be available for a maximum period of 24 months and
students with TA have to complete M.Tech in two years.
(c) Assistantship will be paid on the basis of monthly attendance.
DISCONTINUING THE COURSE
Any candidate, who has joined and wants to discontinue due to any reasons after
closing of admissions, shall have to pay the full fees for the first two semesters to get
the certificates back. Any candidate admitted provisionally and has to discontinue
the course since he/she does not produce the complete mark list and degree
certificate on or before 31.10.2009 will also have to pay the full fees for the first two
semesters to get the certificates back.
RAGGING CASES
In case the applicant for admission is found to have indulged in ragging in the past
his/her admission shall be refused or if it is noticed later that he/she has indulged in
ragging in the past or is indulging in ragging during the period of the M.Tech course
duration, the concerned student shall be given liberty to explain and if his/her
explanation is not found satisfactory, his/her admission gets cancelled and the
authority would expel the student from the institution. Further he/she has to pay a
liquidated damage of Rs. 45,000.00.
4/7
HOW TO APPLY?
1. Use only the appropriate Application form for admission to M.Tech programme
obtained from DOEACC or downloaded from DOEACC Website
www.doeacccalicut.ac.in.
2. Those who want the application form by post have to enclose a self-addressed
stamped cover along with the request.
3. A passport size photograph taken not earlier than 3 months is to be affixed on the
Application Form. The photo in the application should be self-attested. Four
more copies of the same photograph and one stamp size photograph should be
produced at the time of counseling/admission.
5. The application with all the above enclosures should be sent by Registered
Post/Speed Post so as to reach the
COUNSELING
All candidates requesting for admission have to submit the application by post or in
person on or before 5.30 pm of 30–06- 2009. They have to be present personally for
an interview on 15-07-2009 with all the necessary documents (originals and attested
copies). The interview shall be from 10.00 am onwards. Those who fail to submit the
application form before 5.30 pm of 30–06- 2009 and those who don’t bring the
necessary documents (originals and attested copies) on 15-07-2009 are not eligible
for interview or admission.
5/7
The selected candidates have to pay the full fees or one-semester fees for registration
on the same day. The original certificates and mark lists starting from SSLC or
equivalent upto the present qualifying degree have to be submitted. The classes shall
commence on 03-08-2009.
TEST/INTERVIEW
A test/interview shall be conducted for selection of NON-GATE and Sponsored
candidates on 15-07-2009. There shall not be any separate intimation for the
test/interview and all those who apply shall have to be present in person for the
test/interview on 15-07-2009.
IMPORTANT DATES
Commencement of Issue of Application Forms 20-04-2009
Last Date for Issue of Application Forms 30-06-2009
Last Date for Receipt of Completed 30-06-2009
Application forms (before 5.30 pm)
Counseling/Admission 15-07-2009
Reporting/Commencement of Classes 03-08-2009
TELEPHONE NUMBERS
Office 0495 - 2287266 / 2287268
Director’s Office 0495 - 2287123
Co-ordinator M.Tech Embedded Systems 0495 – 2287266 / 2287177
Office Fax 0495 - 2287168
ADDRESS FOR CORRESPONDENCE
M.Tech ES Coordinator,
DOEACC Centre Calicut,
NITC Campus P.O.,
Calicut - 673 601
Kerala, India
The previous students are placed in companies such as WIPRO, INFOSYS, BOSCH,
SIEMENS, MISTRAL, TATA Elxsi, KYOCERA WIRELESS, CAPTRONICS,
GDA Tech, HONEYWELL, SANKHYA TECHNOLOGIES etc.
LAB FACILITIES
We have state-of-the art lab facility in Embedded Systems in the country. These
Include,
• Microcontroller Dev. Systems - Intel 8051, 80C196, MPLAB for PIC 16 & 18
series, ARM9, Cygnal, Motorola etc.
• KEIL ‘C’ Development IDE
• TI DSP Development Systems –‘C6000, ‘C5400, ‘C5500, ‘C243, ‘C2812, ‘C32,
‘C50 etc.
• AD DSP Development Systems - 2191, 21065, 21061 (Sharc) DSPs
• Code Composer Studio, Visual DSP
• VxWorks, RTLinux & QNX RTOS
• Xilinx ISE FPGA Design Tools, Leonardo Spectrum, Model Sim Simulator
• Matlab, Simulink, TI ‘C6000 target for Matlab,
• LabView, Universal DATA I/O programmer
• PC Based EDA tools (ORCAD)
• 500, 350, 300, 100 MHz Digital Storage & Mixed Signal Oscilloscopes
• EMI Test Setup, Wireless LAN
• Linux for Embedded Applications
• Logic Analyzer, SMD Rework station
HOSTEL/CANTEEN FACILITY
We provide hostels for both gents and ladies at reasonable rent. The accommodation
is a shared one with two participants in a room. A canteen is also functioning inside
the hostel and food at reasonable rates is available for break fast, lunch, tea and
dinner.
LOCATION & HOW TO REACH?
DOEACC CENTRE, CALICUT is located 20 kms away from Calicut City and is
functioning in the NITC (REC), Calicut campus. The bus stop is ‘CEDT’ or
‘Panthrandu’ and the present bus fare is Rs 10.50 from city.
FACULTY
We have well qualified post graduate and graduate people undergone specialized
training in various International Universities and Industries in USA, UK, Germany,
Netherlands etc. and with many years of experience in Embedded Systems. Further
we are providing design and consultancy support for many leading Industries. Many
of our embedded development systems are used in educational institutions.
7/7