100% found this document useful (1 vote)
1K views4 pages

API 607 and 6FA Fire Tested Valves

The document lists fire test certified valves that are qualified according to various API standards for different pressure classes and sizes. It provides the qualified pressure classes and corresponding size ranges for valves that have met certification requirements. It also notes that qualification of valves made of certain materials can qualify valves made of other similar materials. Any changes to nonmetallic materials may require requalification testing.

Uploaded by

Kajer quemar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
1K views4 pages

API 607 and 6FA Fire Tested Valves

The document lists fire test certified valves that are qualified according to various API standards for different pressure classes and sizes. It provides the qualified pressure classes and corresponding size ranges for valves that have met certification requirements. It also notes that qualification of valves made of certain materials can qualify valves made of other similar materials. Any changes to nonmetallic materials may require requalification testing.

Uploaded by

Kajer quemar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

7/15/2013

API 607, 4th Ed. Fire Test Certified Valves* Qualified Classes 150
(includes 300 Class) (includes .25", .375", and .75") (includes .75", 1.25", and 1.5")

300
(includes 400 & 600 Classes)

400
(includes 600 & 800 Classes)

600
(includes 800 & 900 Classes)

800
(includes 900 & 1500 Classes)

900
(includes 1500 Class)

1500
(includes 2500 Class)

2500
(only 2500 Class)

0.5" 1" Qualified Sizes

V628-RF-FPL005-001DT-001

V82J-RF-FPL005-001DT-001

V628-RF-FPB020-001DT-001

V82J-RF-FPB020-001DT-001 N826-RF-FPB020-001DT-001

2"

(includes: 1.5", 2.5", 3")

B3C4-SW-STD-2

V528-RF-FPB020-001DT-001 V6C6-RF-FPB020-003AA-002

B8C1-BWFP-BS-2

4" 8"

(includes: 3", 5", 6") (includes: 6")

V5CC-RF-FPB040-008ZZ V3C6-RF-RPB080-007AA-001 Carbon Stainless V1-Series Ball

Legend:

*Valves must also meet the following requirements:


Qualification of a valve with a carbon steel body also qualifies valves of any materials listed in Table 1 of ASME B16.34. Qualifications of a stainless steel valve also qualifies valves of any Group2 and 3 materials listed in Table 1 of ASME B16.34. Qualification of a valve with ASME A-193, Grade B7, fasteners also qualifies valves with fasteners conforming to other ASTM specifications listed in Table 1 of ASME B16.34, except ASTM A-307, Grade B. Qualification of a valve with listed fasteners other than Grade B7 fasteners only qualifies valves with the tested fasteners. Valves with pressure-retaining fasteners confirming to ASTM A307, Grade B, shall not be tested. Qualifications of a valve with filled PTFE components also qualifies valves with virgin PTFE components. Qualification of a valve with virgin PTFE components also qualifies valves with filled PTFE components. Double-seated valves with components of polymers other than PTFE must be individually qualified in accordance with this standard. Qualification of a single-seated valve with virgin PTFE or filled PTFE components may be extended to single-seated valves with components of another polymer by a successful qualification test of an NPS 4 valve that has the same basic design (same construction) as the test valve and that has components of the other polymer. Valves with ceramic or graphitic components require a complete range of tests in accordance with this standard. Once a valve has been tested and qualified, any subsequent change in material of seals affecting external leakage requires full requalification of the valve.
3 2 1

7/15/2013

API 607, 5th Ed. Fire Test Certified Valves* Qualified Classes 150
(includes 300 & 400 Classes) (includes: <2", 2.5", 3", 4") (includes: 3", 4", 5") (includes: 4", 5", 6") (includes: 5", 6", 8") (includes: 6", 8", 10") (includes: 8", 10", 12") (includes: >8")

300
(includes 400 & 600 Classes)

400
(includes 600 & 800 Classes)

600
(includes 800 & 900 Classes)

800
(includes 900 & 1500 Classes)

900
(includes 1500 & 2500 Classes)

1500
(includes 2500 Class)

2500
(only 2500 Class)

2" 2.5" Qualified Sizes 3" 4" 5" 6" 8"

N5C6T-RFFP-BS-2

N727-RF-FPB020-001ET

N520T-RFFP-BS-4

N5C6T-RFFP-BS-6 N5C6T-RFFP-BS-8 Carbon Stainless H7C2-JJ-XXB080-003-P02

Legend:

*Valves must also meet the following requirements:


If a range of valves is covered by testing of ferritic test valves then the type-testing coverage may be extended to cover austenitic or duplex materials by carrying out a further test on a mid-range size of valve of the same design in that material.
2 1

Other materials of construction of the pressure-retaining envelope of the valve require full testing of representative size and pressure ratings as specified in API 607 6th Ed paragraphs 7.3 & 7.4. Alloy steel bolting (e.g. B7, L7) used as part of the valve's pressure retaining envelope may be used to qualify austenitic steel bolting but not vice-versa.

3 4

Any change in nonmetallic materials with respect to the seat-to-closure member seal, seat-to-body seal, stem seal and body joint and seal require a re-qualification. Filled PTFE, however, may qualify non-filled PTFE and vise-versa.

7/15/2013

API 607, 6th Ed. Fire Test Certified Valves* Qualified Classes 150
(includes 300 Class) (includes: <2", 2.5", 3", 4") (includes: 3", 4", 5") (includes: 4", 5", 6") (includes: 5", 6", 8") (includes: 6", 8", 10") (includes: 8", 10", 12")

300
(includes 400 & 600 Classes)

400
(includes 600 & 800 Classes)

600
(includes 800 & 900 Classes)

800
(includes 900 & 1500 Classes)

900

1500

2500
(only 2500 Class)

(includes 1500 Class) (includes 2500 Class)

2" 2.5" Qualified Sizes 3" 4" 5" 6"

V3CC-RF-STL020-014DB-001

V6CC-RF-FPB020-010DB-001

V021-RF-STL020-001AA-001

V7C1-RF-RPB030-023EM-001 V3C4-RF-FPB040-012EM-001

V523-RF-FPB060-004DB-001

V6CC-RF-FPB060-011DB-001

N7C1-RF-RPB060-003AA-001
V7C1-RF-FP-B080024EM-B01 V72R-RF-RP-B080005EM-001

8"

(includes: >8")

Legend:

Carbon

Stainless

*Valves must also meet the following requirements:


If a range of valves is covered by testing of ferritic test valves then the type-testing coverage may be extended to cover austenitic or duplex materials by carrying out a further test on a mid-range size of valve of the same design in that material.
2 1

Other materials of construction of the pressure-retaining envelope of the valve require full testing of representative size and pressure ratings as specified in API 607 6th Ed paragraphs 7.3 & 7.4. Alloy steel bolting (e.g. B7, L7) used as part of the valve's pressure retaining envelope may be used to qualify austenitic steel bolting but not vice-versa.

3 4

Any change in nonmetallic materials with respect to the seat-to-closure member seal, seat-to-body seal, stem seal and body joint and seal require a re-qualification. Filled PTFE, however, may qualify non-filled PTFE and vise-versa.

7/15/2013

API 6FA, 3rd Ed. Fire Test Certified Valves Qualified psi 2000
(includes 3,000 psi) Includes: 21/16", 29/16", 3 /8", 4 /16" Includes: 113/16", 29/16", 31/8", 41/16" Includes: 31/8", 41/16", 5 1 /8 " Includes: 41/16", 51/8", 71/16" Includes: 51/8", 71/16"
1 1

3000
(includes 5,000 psi)

5000
(includes 10,000 psi)

10000
(includes 15,000 psi)

15000
(included 20,000 psi)

20000
(only 20000 psi)

113/16"

NACXT-RJ-FPBS-1.8125

21/16"
9

2 /16" Qualified Sizes (nps)


1

3 / 8"
1

4 /16" 51/8"
1

Includes: 71/16", 9"

NACXT-RJ-FPBS-5 N8C1-JJ-XXB080-005EMP01

7 /16"

Includes: 9", 11"

9"

Includes: 11"

11"

Only 11"

Legend:

Carbon

Stainless

You might also like